into separate append_archive and append_archive_filename functions; the first
takes a "struct archive *" as input, while the second takes a filename, opens
the archive, and calls the first.
There should be no changes in behaviour as a result of this commit; it simply
reorganizes code to make more sense. At some point in the future it may be
possible to share code between append_archive and read_archive, but not yet.
Discussed with: kientzle
affecting the return value from bsdtar), since (a) it usually occurs
due to a perfectly innocent (and unavoidable) race condition where a
user deletes a file in the window between bsdtar reading a directory
and attempting to read the file; and (b) aside from printing a warning
message, bsdtar behaves exactly as if the file had been deleted prior
to bsdtar reading its parent directory.
Reviewed by: kientzle
MFC after: 6 days
complaining about lstat(2) failing. It's a bit scary to find the message
tar: /: Cannot stat: No such file or directory
printed while doing a backup.
MFC after: 1 week
better job searching for the bsdtar binary to test and the gtar binary
to use for inter-operability testing. It should now find the built
(but not installed) binary if there is one, then search for an
installed binary in a number of standard locations.
* New test scripts exercise some basic functionality
* Most header inclusions are now protected (portability)
* read.c now relies on security checks in libarchive instead
of trying to do its own (optimization)
* -p now enabled by default for root, add --no-same-permissions
to disable it
* Comments, minor style fixes.
caused fstat to produce duplicated output for threaded processes. Instead
use KERN_PROC_PROC to get just one kinfo_proc per process.
MFC After: 2 weeks
After reading Makefile and all the files that are included using .include
or .sinclude directives (source Makefiles) make considers each source
Makefile as a target and tries to rebuild it. Both explicit and implicit
rules are checked and all source Makefiles are updated if necessary. If
any of the source Makefiles were rebuilt, make restarts from clean state.
To prevent infinite loops the following source Makefile targets are
ignored:
- :: targets that have no prerequisites but have commands
- ! targets
- targets that have .PHONY or .EXEC attributes
- targets without prerequisites and without commands
When remaking a source Makefile options -t (touch target), -q (query
mode), and -n (no exec) do not take effect, unless source Makefile is
specified explicitly as a target in make command line.
Additionally, system makefiles and .depend are not considered as a
Makefiles that can be rebuilt.
Reviewed by: harti
error return from open(2), leading to an erroneous value of maxJobs and
a hung make when -f is standard input and -j is used.
PR: bin/101232
Submitted by: Nate Eldredge <nge@cs.hmc.edu>
as part of an old configuration shuffle. As a result, although
ACL restore has been working, ACLs haven't been written into archives
for some time. <sigh>
Pointy hat: You know.
MFC after: 3 days
in FreeBSD, and originated from INRIA IPv6.
Stub out netstat reference to addr2ascii() I mistakenly introduced.
Update misleading man page sections.
Merge NetBSD's getnameinfo() AF_LINK extensions for a portable way to
print link-layer addresses given a sockaddr_dl(), minus the IEEE 1394
bits which don't map directly to our code.
Obtained from: NetBSD (getnameinfo.c)
Discussed on: current (March 2006)
sidewaysintpr(). This increases the accuracy of the per-interval
counts when they are interpreted as rates. Repeated calls to alarm(n)
give an average interval that is about 2 ticks larger than n and has
a large variance. Periodic itimers normally get the average almost
right but have similarly large variance (due to scheduling delays).
Statistics utilities should use clock_gettime() to determine the
actual interval, but it is still useful to maximize the accuracy of
the interval, especially for cases like netstat -w where counts are
displayed so the program cannot hide the inaccuracy in a rate
conversion.
potential issues where the peer does not close, potentially leaving
thousands of connections in FIN_WAIT_2. This is controlled by a new sysctl
fast_finwait2_recycle, which is disabled by default.
Reviewed by: gnn, silby.
- BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining
whether incoming, outgoing, or all packets on the interface should be
returned by BPF. Set to BPF_D_IN to see only incoming packets on the
interface. Set to BPF_D_INOUT to see packets originating locally and
remotely on the interface. Set to BPF_D_OUT to see only outgoing
packets on the interface. This setting is initialized to BPF_D_INOUT
by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but
kept for backward compatibility.
- BIOCFEEDBACK sets packet feedback mode. This allows injected packets
to be fed back as input to the interface when output via the interface is
successful. When BPF_D_INOUT direction is set, injected outgoing packet
is not returned by BPF to avoid duplication. This flag is initialized to
zero by default.
Note that libpcap has been modified to support BPF_D_OUT direction for
pcap_setdirection(3) and PCAP_D_OUT direction is functional now.
Reviewed by: rwatson
loaded into the system.
Change wording of comments to reflect the fact we should unconditionally
use KVM if the -M option is used to specify a core file.
Add comments to document the fact that IPv6 multicast forwarding
information display still relies on KVM for gathering information.
determine if this is a physical dir without an lstat().
While I'm in here, try to clarify the comments around
the _is_dir() and _is_physical_dir() tests.
Without -n, we now only print a "network name" without the prefix length
under the following conditions:
1) the network address and mask matches a classful network prefix;
2) getnetbyaddr(3) returns a network name for this network address.
With -n, we unconditionally print the full unabbreviated CIDR network
prefix in the form "a.b.c.d/p". 0.0.0.0/0 is still printed as "default".
This change is in preparation for changes such as equal-cost multipath, and
to more generally assist operational deployment of FreeBSD as a modern IPv4
router. There are currently no plans to backport this change.
Discussed on: freebsd-net
(as determined by the initial size given to the header).
Libarchive recently changed to correctly return the amount
of data actually consumed in this case, which revealed this
bug in bsdtar.
-f path
Only print quota information for the file system that path resides on.
-r
Display the quota information in a raw format.
Reviewed by: freebsd-hackers
* Create file if it doesn't exist.
* If archive is "empty", then append to it with pax restricted
* If user specified a format, use that if it's compatible with
the existing format.
limit, quota will report one of the grace times incorrectly.
This is due to it storing the result in a static buffer, and the
routine being called like:
printf("....", ..., timeprnt(btime), timeprnt(itime), ...)
The problem becomes very obvious if you change one of the default
grace periods to be much larger than the other one.
Changed timeprnt to dynamically allocate the string to be displayed.
in fstab and they are normally mounted as /a/b, if /b is not mounted,
the various quota utilities will incorrectly operate with the quotas on
/a (silently) when operations are attemted on /b.
Sync up all the hasquota() routines between all the different
quota utilities and change it to detect if the file system we are
attempting to perform quota operations on is not currently mounted
and warn the user accordingly.
PR: bin/38918
NetBSD version is a feature-to-feature re-implementation of GNU
gzip using the freely-redistributable zlib and this version is
expected to be mostly bug-to-bug compatible with the GNU
implementation.
- Because this is a piece of mature code and we want to make
changes so it is added directly rather than importing to
src/contrib.
- Connect newly added code to src/usr.bin/ and rescue/rescue
build.
- Disconnect the GNU gzip code from build for now, they will
be eventually removed completely.
- Provide two new src.conf(5) knobs, WITHOUT_BZIP2_SUPPORT and
WITHOUT_BZIP2.
Tested by: kris (full exp-7 pointyhat build)
Approved by: core (importing a 4-clause BSD licensed file)
Approved by: re (adding new utility during -HEAD code slush)
official gnu configure scripts and a couple of other places.
Add an example noisy, loud and annoying placeholder for /usr/bin/objformat
if it turns out to too much trouble to be gone. It is not connected to
the build yet.
patch this uses off_t.
WARNSify and add $FreeBSD$ to Makefile.
PR: bin/107824
Submitted by: Brian Cornell <briancornell at earthlink dot net>
MFC after: 3 days
activate the traces, set the LD_UTRACE (or LD_32_UTRACE) environment
variable. This also includes code in kdump(8) to parse the traces.
Reviewed by: kan, jdp
MFC after: 2 weeks
human-readable format. Note that we report 'realloc(p, 0)' as 'free(p)'
since both cases are encoded the same way and 'free()' is more common
than a realloc() to 0.
MFC after: 1 week
of a socket() call with sockipprotoname() if the first parameter (domain)
is PF_INET or PF_INET6.
Old parsing behavior before this change:
ping6 CALL socket(PF_INET6,SOCK_RAW,0x3a)
New behavior after this change:
ping6 CALL socket(PF_INET6,SOCK_RAW,IPPROTO_ICMPV6)
of auto_or_type.
The old parsing code would incorrectly decode a socket() call in the
ping6 program as:
CALL socket(PF_PUP|PF_ECMA|PF_APPLETALK|PF_COIP|PF_SIP,SOCK_DGRAM,0)
The new parsing code decodes the same socket() call as:
CALL socket(PF_INET6,SOCK_DGRAM,0)
However, auto_if_type() uses if/else statements in C instead
of a single switch statement, when mapping an integer value to
a #define. For certain cases where multiple #define constants
alias to a single integer value, auto_if_type() makes things easier
to parse than auto_switch_type().
disk device names such as da0s1b. So we also get rid of the nasty
constant 5 scattered over the code.
Implementing this change is a good chance to improve other bits
around it: init saved lengths early, always check return value from
kvm_getswapinfo().
1) Resize the Used column to avoid screen overflow if BLOCKSIZE is long.
2) Track the current swap configuration so that its changes don't break
the display.
Suggested by: bde (1)
it as an enum.
If an SCTP SOCK_SEQPACKET socket was opened, kdump would display this
wrong output:
socket(PF_INET,SOCK_STREAM|SOCK_RDM|SOCK_SEQPACKET,0x84)
instead of this correct output:
socket(PF_INET,SOCK_SEQPACKET,0x84)
MFC after: 2 weeks
