doesn't exist or add one that is already present, if the -q flag
is set. Useful for "ipfw -q /dev/stdin" when the command above is
invoked from something like python or TCL to feed commands
down the throat of ipfw.
MFC in: 1 week
supported for a moment.
- Don't allow to use -i when no passphrase is given. Now if iterations is
equal to -1 (not set), we know that we should not ask for the passphrase
on boot.
It still doesn't handle situation when one key is protected with
passphrase and the other is not. There is no quick fix for this.
The complete solution will be to make number of iterations a per-key
value. Because this need metadata format change and is only needed for
devices attached on boot, I'll leave it as it is for now.
MFC after: 3 days
makes it practical to use GBDE for "something you have plus something
you know" security together with a USB flash drive.
Reviewed by: phk
MFC after: 7 days
Presently, ifconfig callbacks are used for L2 configuration, media
and vlan, so actions associated with address assignment, like sending
out a gratuitous ARP, should go when L2 is running already.
This also should fix the problem with setting up vlan interfaces
from rc.conf, when both IP and vlan+vlandev parameters are passed
to ifconfig at once.
Future work: Consider introducing several ifconfig callback lists
to invoke callbacks orderly.
MFC after: 1 week
/tmp may not be writeable yet when dhclient is first run via
/etc/rc.d/netif so using it may not work. Also, writing to a
predictable file in /tmp as root is a really bad idea since a malicious
user may be able to win a race and insert a symlink which will allow
them to cause any file to be overwritten. To solve these problems,
create the tempory file in /var/run which will exist this early and is
writable only by root.
Security: Local risk if users can cause dhclient to run on demand
(such as by unplugging and replugging the network cable).
system is mounted. This prevevents duplicated mounts.
The change I made against the original patch is to fall back to the given
path on realpath(2) failure instead of exiting with an error.
Submitted by: Andreas Kohn <andreas@syndrom23.de>
PR: bin/89782
MFC after: 3 days
circumstances that include circular dependencies.
PR: bin/91789
PR submitted by: Frank Behrens <frank@pinky.sax.de>
Patch submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
entries from the interface rather than using ifconfig's delete command.
This preserves non-dhclient configured addresses (though they are wiped
out when dhclient is restarted).
MFC after: 1 week
disk. Apparently some people want to use mdmfs as mount_* as a
shortcut for mounting existing file-based file systems.
Note that unlike in the patches from the submitters, this option is
not available in compat mode. Compat mode was supposed to support only
things that mount_mfs used to support. To use this option from fstab,
mdmfs should be called mount_md, not mount_mfs. This distinction has
not always upkept for new options, and those can't be fixed now
without breaking people's systems, but new options should not usually
be allowed in compat mode. (Not sure why -F is allowed there at all.)
PR: 57641
Submitted by: Ruben de Groot
Submitted independently by: Wojciech A. Koszek, for Urzad Miasta Czestochowa
autonumbering is requested, set the unit to 0 instead of -1. This
option is just for output, and "/dev/md-1" looks disconcerting.
Submitted by: Wojciech A. Koszek
kernel is in the order the devices were made, which is not useful to
the user. Also, remove the "%d more" test since the kernel does not
return the complete count in md_pad[0] (maybe it should?).
Submitted by: Wojciech A. Koszek
action argument with the value obtained from table lookup. The feature
is now applicable only to "pipe", "queue", "divert", "tee", "netgraph"
and "ngtee" rules.
An example usage:
ipfw pipe 1000 config bw 1000Kbyte/s
ipfw pipe 4000 config bw 4000Kbyte/s
ipfw table 1 add x.x.x.x 1000
ipfw table 1 add x.x.x.y 4000
ipfw pipe tablearg ip from table(1) to any
In the example above the rule will throw different packets to different pipes.
TODO:
- Support "skipto" action, but without searching all rules.
- Improve parser, so that it warns about bad rules. These are:
- "tablearg" argument to action, but no "table" in the rule. All
traffic will be blocked.
- "tablearg" argument to action, but "table" searches for entry with
a specific value. All traffic will be blocked.
- "tablearg" argument to action, and two "table" looks - for src and
for dst. The last lookup will match.
- number of read I/O requests,
- number of write I/O requests,
- number of read bytes,
- number of written bytes.
Add 'reset' subcommand for resetting statistics.
value (intmax_t) and boolean (int).
Based on that provide three functions:
- gctl_get_ascii()
- gctl_get_int()
- gctl_get_intmax()
- Hide gctl_get_param() function, as it is only used internally in
subr.c.
- Allow to provide argument name as (fmt, ...).
- Assert geom(8) bugs (missing argument is a geom(8) bug).
- Clean-up and simplify the code by using new functions and assumtions
(no more checking for missing argument).
Tested by: regression tests
IPv6 support was committed:
- Stop treating `ip' and `ipv6' as special in `proto' option as they
conflict with /etc/protocols.
- Disuse `ipv4' in `proto' option as it is corresponding to `ipv6'.
- When protocol is specified as numeric, treat it as it is even it is
41 (ipv6).
- Allow zero for protocol as it is valid number of `ip'.
Still, we cannot specify an IPv6 over an IPv4 tunnel like before such
as:
pass ipv6 from any to any
But, now, you can specify it like:
pass ip4 from any to any proto ipv6
PR: kern/89472
Reported by: Ga l Roualland <gael.roualland__at__dial.oleane.com>
MFC after: 1 week
iov address internally through realloc(3). However, since the function
parameter wasn't designed to allow the modified iov being passed back to
the caller, we ended up feeding iov with several corrupted entries(this
depends on how many arguments were pushed into iovec before set_charset())
to nmount(2).
This commit fixes this regression introduced in rev1.37 such that
mount_msdosfs(8) with code page conversion option(-W,-D) enabled works again.
Reviewed by: rodrigc
iov address internally through realloc(3). However, since the function
parameter wasn't designed to allow the modified iov being passed back to
the caller, we end up feeding iov with several corrupted entries(depends on
how many arguments were pushed into iovec before set_charset()) to nmount(2).
This commit fixes this regression introduced in rev1.31 such that
mount_cd9660(8) with code page conversion option(-C) enabled works again.
Reviewed by: rodrigc
external mounting program list as well; otherwise, entry like the following
in /etc/fstab wouldn't work:
/dev/acd0 /mnt/cdrom cd9660 ro,-C=big5 0 0
Reviewed by: rodrigc
Add functions to rename objects and to move a subdisk from one drive
to another.
Add manual page (finally).
Bring up-to-date the online help.
Obtained from: Chris Jones <chris.jones@ualberta.ca>
Sponsored by: Google Summer of Code 2005
MFC in: 1 week
- Add build_iovec_argf() helper function, for help converting old
mount options which used the mount_argf() function for the mount() syscall.
Discussed with: phk
- Teach the mount program to call the nmount() syscall directly
- Preserve existing method of calling mount() for UFS, until we clean things
up.
- Preserve existing method of forking and calling external mount programs for
mfs, msdosfs, nfs, nfs4, ntfs, nwfs, nullfs, portalfs, reiserfs, smbfs,
udf, umapfs, unionfs
- devfs, linprocfs, procfs, ext2fs call nmount() syscall directly, since
that is all those external mount programs were doing
Reviewed by: phk
Discussed on: arch
length and bail immediatly if the returned length is wrong rather than
attempting to set an correct value.
This commit differs from the patch in the PR in the use of exit instead
of return and the use of a defined value for the array.
Submitted by: Daan Vreeken [PA4DAN] <Danovitsch at Vitsch dot net>
PR: bin/74509
that debug.mpsafenet be set to 0. It is still possible for dead locks to
occur while these filtering options are used due to the layering violation
inherent in their implementation.
Discussed: -current, rwatson, glebius
<group> is a numeric user/group ID instead of a user/group name (as
explicitly intended to be allowed by both the manual page and the
implementation).
Before this fix, mdmfs(8) aborted:
| # mdmfs -s 32m -w 0:0 md /var/tmp/foo
| Assertion failed: (mip->mi_have_uid), function extract_ugid, file /usr/src/sbin/mdmfs/mdmfs.c, line 555.
| Abort trap (core dumped)
The "mi_have_[ug]id" fields were only set in case a name lookup was
successful. Instead they also have to be set in case the string to
integer conversion was successful.
Additionally, as a result of this fix, two assertions at the end of
the function are now always true and hence can be just be removed. It
is guarrantied that both the UID and the GID are set when the function
returns regularily, else it would have been already bailed out with
usage()/exit(3) or errx(3) before.
Spotted by: Christoph Schug <chris@schug.net>
MFC after: 3 days
where applicable. The main reason for this change is that
the location of make.conf is not constant and can be
modified via __MAKE_CONF. This change also improves
hyper-text linkage in our manpages.
MFC after: 2 weeks
and "vlandev" commands can be specified in any order.
This makes the code more compact and clear as well.
Improve error check on vlan argument.
MFC after: 2 weeks
introduce "-tunnel" as an alias for "deletetunnel".
The latter is overly long and prone to typos, but
keep it for POLA since it costs nothing.
MFC after: 5 days
