unhappy (probably they don't handle crossing the 64k boundary, etc.).
Fix this by changing zfsldr to use a loop reading from the disk one
sector at a time. To avoid trashing the saved copy of the MBR which is
used for disk I/O, read zfsboot2 at address 0x9000. This has the
advantage that BTX no longer needs to be relocated as it is read into
the correct location. However, the loop to relocate zfsboot2.bin can
now cross a 64k boundary, so change it to use relative segments instead.
(This will need further work if zfsboot2.bin ever exceeds 64k.)
While here, stop storing a relocated copy of zfsldr at 0x700. This was
only used by the xread hack which has recently been removed (and even
that use was dubious). Also, include the BIOS error code as hex when
reporting read errors to aid in debugging.
Much thanks to Henri Hennebert for patiently testing various iterations
of the patch as well as fixing the zfsboot2.bin relocation to use
relative segments.
MFC after: 1 week
Some of loader filesystems are very ill equipped to handle seeking
backwards within the file. Namely, tftp requires trasfer to be
restarted from the start of the file every time we go backwards.
Discussed on hackers and recommended for inclusion into 9.0 at the devsummit.
All support email to devin dteske at vicor dot ignoreme dot com .
Submitted by: dteske at vicor dot ignoreme dot com
Reviewed by: me and many others
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
boot2 calls back into boot1 to perform disk reads. The ZFS MBR boot blocks
do not have the same space constraints, so remove this hack for ZFS.
While here, remove commented out code to support C/H/S addressing from
zfsldr. The ZFS and GPT bootstraps always just use EDD LBA addressing.
MFC after: 2 weeks
- Mark getc() as inline, this has no effect on gcc but helps clang.
- Move getc() body before xgetc() so gcc does not emit a warning about
function having no body.
This modifies CFLAGS and tweaks sio.S to use the new calling convention.
The sio_init() and sio_putc() prototypes are modified so that other
users of this code know the correct calling convention.
This makes the code smaller when compiled with clang.
Reviewed by: jhb
Tested by: me and Freddie Cash <fjwcash gmail com>
to the l_load() method in the file_formats structure, while being passed
an address as an argument (dest). With file_load() calling arch_loadaddr()
now, this bug is a little bit more significant.
Spotted by: nyan@ (nice catch!)
boundaries. For good measure, align all other objects to cache
lines boundaries.
Use the new arch_loadseg I/F to keep track of kernel text and
data so that we can wire as much of it as is possible. It is
the responsibility of the kernel to link critical (read IVT
related) code and data at the front of the respective segment
so that it's covered by TRs before the kernel has a chance to
add more translations.
Use a better way of determining whether we're loading a legacy
kernel or not. We can't check for the presence of the PBVM page
table, because we may have unloaded that kernel and loaded an
older (legacy) kernel after that. Simply use the latest load
address for it.
1. arch_loadaddr - used by platform code to adjust the address at which
the object gets loaded. Implement PC98 using this new interface instead
of using conditional compilation. For ELF objects the ELF header is
passed as the data pointer. For raw files it's the filename. Note that
ELF objects are first considered as raw files.
2. arch_loadseg - used by platform code to keep track of actual segments,
so that (instruction) caches can be flushed or translations can be
created. Both the ELF header as well as the program header are passed
to allow platform code to treat the kernel proper differently from any
additional modules and to have all the relevant details of the loaded
segment (e.g. protection).
Add support for Pre-Boot Virtual Memory (PBVM) to the loader.
PBVM allows us to link the kernel at a fixed virtual address without
having to make any assumptions about the physical memory layout. On
the SGI Altix 350 for example, there's no usuable physical memory
below 192GB. Also, the PBVM allows us to control better where we're
going to physically load the kernel and its modules so that we can
make sure we load the kernel in memory that's close to the BSP.
The PBVM is managed by a simple page table. The minimum size of the
page table is 4KB (EFI page size) and the maximum is currently set
to 1MB. A page in the PBVM is 64KB, as that's the maximum alignment
one can specify in a linker script. The bottom line is that PBVM is
between 64KB and 8GB in size.
The loader maps the PBVM page table at a fixed virtual address and
using a single translations. The PBVM itself is also mapped using a
single translation for a maximum of 32MB.
While here, increase the heap in the EFI loader from 512KB to 2MB
and set the stage for supporting relocatable modules.
sizes are not supported.
o Map the PBVM page table.
o Map the PBVM using the largest possible power of 2 that is less than
the amount of PBVM used and round down to a valid page size. Note
that the current kernel is between 8MB and 16MB in size, which would
mean that 8MB would be the typical size of the mapping, if only 8MB
wasn't an invalid page size. In practice, we end up mapping the first
4MB of PBVM in most cases.
between kernel virtual address and physical address anymore. This so
that we can link the kernel at some virtual address without having
to worry whether the corresponding physical memory exists and is
available. The PBVM uses 64KB pages that are mapped to physical
addresses using a page table. The page table is at least 1 EFI page
in size, but can grow up to 1MB. This effectively gives us a memory
size between 32MB and 8GB -- i.e. enough to load a DVD image if one
wants to.
The loader assigns physical memory based on the EFI memory map and
makes sure that all physical memory is naturally aligned and a power
of 2. At this time there's no consideration for allocating physical
memory that is close to the BSP.
The kernel is informed about the physical address of the page table
and its size and can locate all PBVM pages through it.
The loader does not wire the PBVM page table yet. Instead it wires
all of the PBVM with a single translation. This is fine for now,
but a follow-up commit will fix it. We cannot handle more than 32MB
right now.
Note that the loader will map as much of the loaded kernel and
modules as possible, but it's up to the kernel to handle page faults
for references that aren't mapped. To make that easier, the page
table is mapped at a fixed virtual address.
o bunch of variables are turned into uint8_t
o initial setting of namep[] in lookup() is removed
as it's only overwritten a few lines down
o kname is explicitly initialized in main() as BSS
in boot2 is not zeroed
o the setting and reading of "fmt" in load() is removed
o buf in printf() is made static to save space
Reviewed by: jhb
Tested by: me and Fabian Keil <freebsd-listen fabiankeil de>
This patch shrinks boot2 a little.
o It switches kname to be just a pointer instead of an array.
o It changes ioctl to unsigned from uint8_t.
o It changes the second keyhit limit to 3 seconds from 5.
o It removes bi_basemem/bi_extmem/bi_memsizes_valid setting.
o It switches kname to be just a pointer instead of an array
thus avoiding a couple of memcpy()s.
o It changes ioctl to unsigned from uint8_t.
o It changes the second keyhit limit to 3 seconds from 5
so that constant propagation can take place.
o It changes the ticks overflow computation as suggested by bde@.
o It removes bi_basemem/bi_extmem/bi_memsizes_valid setting from
bootinfo as it is unused.
Reviewed by: jhb
