by W.Richard Ste vens. EINTR handling suggested by bde@freebsd.org).
Code cleanup:
1. Add missing return type.
2. Replace 'union wait' by int.
3. Use Posix-style signal handling instead of signal().
4. Use fork() instead of deprecated vfork().
5. Block signals before fork()'ing, instead of after.
6. Return -1 if fork() fails, instead of 0.
7. Add EINTR handling for waitpid() call.
Also add claim of Posix conformance to man page.
Now that we preserve RPC handles instead of rebuilding them each time
a ypcln function is called, we have to be careful about keeping our sockets
in a sane state. It's possible that the caller may call a ypclnt
function, and then decide to close all its file descriptors. This would
also close the socket descriptor held by the yplib code. Worse, it
could re-open the same descriptor number for its own use. If it then calls
another ypclnt function, the subsequent RPC will fail because the socket
will either be gone or replaced with Something Completely Different. The
yplib code will recover by rebinding, but it doing so it may wreck the
descriptor which now belongs to the caller.
To fix this, _yp_dobind() needs to label the descriptor somehow so
that it can test it later to make sure it hasn't been altered between
ypclnt calls. It does this by binding the socket, thus associating a port
number with it. It then saves this port number in the dom_local_port member
of the dom_binding structure for the given domain. When _yp_dobind() is
called again (which it is at the start of each ypclnt function), it checks
to see if the domain is already bound, and if it is, it does a getsockname()
on the socket and compares the port number to the one it saved. If the
getsockname() fails, or the port number doesn't match, it abandons the
socket and sets up a new client handle.
This still incurs some syscall overhead, which is what I was trying to
avoid, but it's still not as bad as before.
functions are implimented as wrappers around getservent(), which means it's
up to getservent() to do all the work. The NIS support in getservent()
only allows it to scan through the services.byname map one entry at a
time until it finds the requested service name/port. This can be painfully
slow due to the overhead involved (lots and lots of successive RPCs).
To fix this, we allow getservbyname() and getservbyport() to signal
getservent() that if NIS is turned on (there's a '+' in /etc/services),
the usual yp_first()/yp_next() linear search should be abandoned and
yp_match() used instead. This causes getservent() to immediately
locate the requested entry instead of wasting time groping through the
whole map.
The downside is that this trick is accomplished by exporting a couple of
pointers from getservent.c which getservbyname.c and getservbyport.c can
preset in order to tell getservent() what to do. If all three functions
were in the same source module, then the extra cruft could be delcared
static to avoid poluting the global symbol space. Maybe they should be
combined anyway. For now I've settled on prepending lots of underscores.
privileged port within a single bind(), rather than looping through
attempts to bind over and over again over progressively lower ports.
This should speed up rlogin/rsh etc, and will probably cure some of the
strange rlogin hangs that have been reported in the past where rresvport()
managed to bind() to a port address that it shouldn't have.
not based on gpl'ed code, just prototype and usage. I'm not 100% certain
they behave the same while the system is in trouble (eg: malloc() failing)
but in those circumstances all bets would be off anyway.
These routines work like sprintf() and vsprintf(), except that instead of
using a fixed buffer, they allocate memory and return it to the user
and it's the user's responsibility to free() it. They have allocate as
much memory as they need (and can get), so the size of strings it can deal
with is limited only by the amount of memory it can malloc() on your
behalf.
There are a few gpl'ed programs starting to use this interface, and it's
becoming more common with the scares about security risks with sprintf().
I dont like the look of the code that the various programs (including
cvs, gdb, libg++, etc) provide if configure can't find it on the system.
It should be possible to modify the stdio core code to provide this
interface more efficiently, I was more worried about having something
that worked and was secure. :-) (I noticed that there was once intended
to be a smprintf() routine when our stdio was written for 4.4BSD, but it
looks pretty stillborn, and it's intended interface is not clear). Since
Linux and gnu libc have this interface, it seemed silly to bring yet
another one onto the scene.
to call clnt_destroy() on a potentially NULL RPC handle. Somebody should
bang on this a bit to make sure the problem is really gone; I seem to
have difficulty reproducing it. Patch provided by Peter Wemm and
slightly tweaked by me.
- Don't call _yp_unbind() in individual ypclnt functions unless we encounter
an RPC error while making a clnt_call().
bugs in your code is to put it in the -stable branch. (Corollary: the
day you discover the bug is the day the Internet decides to route your
telnet session to the repository box via Zimbabwe.)
Remove one bogus free(result) (from _havemaster()) that slipped by me.
Flagged by: phkmalloc
Pointed out to me by: Stefan Esser
In a nutshell, this macroizes the local/global symbol scoping rules
that are different in a.out and ELF. It also makes the i386 assembler
stubs conform to i386 PIC calling conventions - the a.out ld.so didn't
object, but the ELF one needs it as it implements PIC jumps via PLT's as
well as calls. The a.out rtld only worked because it was accidently
snooping the grandparent calling function's return address off the stack..
This also affects the libc_r code a little, because of cpp macro nesting.
Each of the ypclnt functions does a _yp_dobind() when it starts and then
a _yp_unbind() when it finishes. This is not strictly necessary and it
wastes cycles: it means we do a new clnt_create() and clnt_destroy()
for each yp_whatever() call. In fact, you can do multiple clnt_call()s
using a single RPC client handle returned by clnt_create(). Ideally we only
have to create a handle to ypserv once (the first time we call a ypclnt
function) and then destroy it and rebind only if a call to ypserv fails.
- Modify _yp_dobind() so that it only creates a new RPC client handle
when establishing a new binding or when one of the ypclnt calls
invalidates an existing binding and calls _yp_dobind() to establish
a new one.
- Modify the various ypclnt functions to only call _yp_unbind() if a
call to ypserv fails.
If _ANSI_SOURCE or _POSIX_SOURCE is defined, then <ctype.h> had to
be included before <stddef.h> or <stdlib.h> to get rune_t declared.
Now rune_t is declared perfectly bogusly in all cases when <ctype.h>
is included.
This change breaks similar (but more convoluted) convolutions in the
stddef.h in gcc distributions. Ports of gcc should avoid using the
gcc headers.
In __initdb(), a failure to open the local password database is supposed
to result in a warning message being syslog()ed. This warning is only
supposed to be generated as long as the 'warned' flag hasn't been yet;
once the warning is generated, the flag should be set so that the message
is only syslog()ed once. However, while the state of the flag is checked
properly, the flag's state is never changed, so you always get multiple
warnings instead of just one.
Pointed out by: Peter Wemm
Set_Boot_Blocks(). Boy, this one had me tearing my hair out!
I hate how the loader distinguishes between `extern char *foo' and
`extern char foo[]' sometimes! :-)
as any non-shadowed /etc/passwd. Ironically, all programs using S/Key
have already been setuid root except keyinfo(1).
This modification creates /etc/skeykeys with mode 0600 to prevent it
from being examined by ordinary users.
This commit covers the man pages for most of the ANSI library functions.
A few others such as strtol.3 have to mention <sys/types.h> because they
mix ANSI interfaces with less well designed extensions.
getnetgrent.c:
- Catch one bogon that snuck by: in _listmatch(), check for '\0'
rather than '\n'; strings returned from yp_match() are terminated
with a nul, not a newline.
getpwent.c:
- Rip out all of the +inclusion/-exclusion stuff from before and
replace it with something a little less grotty. The main problem
with the old mechanism was that it wasted many cycles processing
NIS entries even after it already knew they were to be exlcuded
(or not included, depending on your pointof view). The highlights
of these changes include:
o Uses an in-memory hash database table to keep track of all the
-@netgroup, -user, and -@group exclusions.
o Tries harder to duplicate the behavior normally obtained when using
NIS inclusions/exclusions on a flat /etc/passwd file (meaning things
come out in much the same order).
o Uses seperate methods for handling getpwent() and getpwnam()/getpwuid()
operations instead of trying to do everything with one general
function, which didn't work as well as I thought it would.
o Uses both getnetgrent() and innetgr() to try to save time where
possible.
o Use only one special token in the local password database
(_PW_KEYYPBYNUM) instead of seperate tokens to mark + and -
entries (and stop using the counter tokens too). If this new
token doesn't exist, the code will make due with the standard
_PW_KEYBYNUM token in order to support older databases that
won't have the new token in them.
All this is an attempt to make this stuff work better in environments
with large NIS passwd databases.
- Clear the _yp_innetgr flag immediately after calling setnetgrent() from
innetgr(). We only need the flag set to temporarily alter setnetgrent()'s
behavior. Previously, it was being cleared too late.
- When in NIS-only mode, innetgr() was wasting time doing unecessary
extra processing after it had already found a match.
- Remember to free memory allocated by the NIS functions during innetgr()
searches.
man pages up to mdoc guidelines and fix some minor formatting glitches.
Also fixed a number of man pages to not abuse the .Xr macro to
display functions and path names and a lot of other junk.
nonstandard normal version and the standard threaded version.
Removed a bogus L in a constant. fpos_t's aren't longs, and casting to
fpos_t would be verbose.
- add __BEGIN_DECLS and __END_DECLS,
- add a bunch of ``const'' qualifiers all over the place,
- rename the `private' struct member into `private_data' to avoid the
clash with the C++ keyword.
/var/run resides on an NFS filesystem (flock() always returns 0 in
this case, so we falsely assume that ypbind is dead and bail out).
Settle instead for better failure checking when using clnttcp_create()
and clnt_call() to interact with ypbind. We still try to flock()
/var/yp/binding/$DOMAINNAME.2, but if this doesn't work, we drop into
the code that retrieves the binding information from ypbind directly.
If that also fails, then we're toast. On NFS filesystems, this means
we'll be ignoring the binding file for no reason and always talking to
ypbind even though we don't have to, but at least things will work.
(I could just replace the flock(/var/run/ypbind.lock) check with
an RPC call to ypbind's NULLPROC procedure, but if the flock() of
the binding file doesn't pan out we're going to try to talk to
ypbind later anyway. *sigh* Is NFS file locking ever going to work?)
broken. The translation from network number to ASCII string was not
working correctly (you would sometimes get things like 0.244.0.0 instead
of 244.0.0).
Also copied results of yp_match() to a static buffer for consistency
with gethostbynis.c.
Note: _getnetbynisaddr() chops off trailing .0's, i.e. 244.0.0 is
truncated to 244. By contrast, getnetbyht.c code (for local /etc/networks
lookups) leaves the traling .0's in place. This means that the NIS
and local file lookups will match different things when looking up the
same network number. I'm not sure which is the correct behavior. (I
think the DNS lookup code tries all combinations -- should the NIS
and local host lookup routines do that too?)
the precision; ANSI X3J11 is not crystal clear but certainly says
that the precision specifies the number of /digits/, and signs
and "0x" aren't really digits.
NetBSD already has a similar patch.
There needs to be a better way of doing this..
preferably we could add another pass to the
normal libc makefiles to do _r versions as well as _p versions
of a successful map retrieval. (This has to do with a previous change
to xdr_ypresp_all_seq() and ypxfr_get_map(); originally, yp_all()
would look for a return value of YP_FALSE to signal success, but now
it should be looking for YP_NOMORE. It should not be passing YP_NOMORE
back up to the caller though.)
Noticed by: <aagero@aage.priv.no>
There is also another small bug here, which is that the call to
xdr_free() that happens immediately after the clnt_call() in yp_all()
clobbers the return status value. I've worked around this for now,
but I think the xdr_free() is actually bogus and should be removed.
I want to check some more before I do that though.
a machine with aliase ip addresses on the same subnet of an
interfaces' `real' ip addresses would generate <n> duplicate
broadcasts in clnt_broadcast().
Basically, this fix does a purge on the list of bradcast addresses.
discussion on -core about disk partitioning tools etc.
Add NOPIC=yes to Makefile to prevent any possibility of version mismatch
because of the potential grave consequences. (as suggested by phk)
Note that this is also on RELENG_2_1_0, since the sysinstall stuff is
hopefully going to remain in sync.
- Fix problem described in PR #1079: _gethostbynisaddr() doesn't
work. Make it accept the same arguments as all the other
gethostby*addr() functions and properly convert the supplied IP
address into a text string so that yp_match() can find it in the
hosts.byaddr map.
- Also fix potential memory leak: copy the results of yp_match() to
a static buffer and free the result (yp_match() returns dynamically
allocated memory).
ether_addr.c:
- Since I was in the neighborhood, fix ether_ntohost() and
ether_hostton() so that they don't bogusly for a free(result)
when yp_match() fails.
matter much on some systems, but on ftp servers (like wcarchive) where
you run with special stripped group and pwd.db files in the anonymous
ftp /etc, this can be a major speedup for ls(1).
ss_flags to SS_DISABLE and SS_ONSTACK. SA_ONSTACK is still used in
struct sigaction. Nowhere in our entire source tree could I find a
single place these were used.
reconnect once using the saved openlog() parameters.
This helps one of the system startup race conditions. If syslogd takes too
long to get going, some daemons can fail the connection and forever log
to the console even though the syslogd is running. That is ..unfortunate..
the statically compiled PS_STRINGS and USRSTACK variables. This prevents
programs using setproctitle from coredumping if the kernel VM is increased,
and stops libkvm users (w, ps, etc) from needing to be recompiled if only
the VM layout changes.
explicit that it is global to the entire "session", and that setsid() or
daemon() are need to have been called at some point.
The most notable offender of setlogin() misuse is XFree86's xdm.
to 2. This makes them agree with the declarations in libgcc, and
clears the way once again for linking c++rt0.o into all libraries,
and eliminating CPLUSPLUSLIB from <bsd.lib.mk>. (I have not made
that change yet, because there is still a bootstrapping problem
for "make world".)
Also, removed a check which ensured that the constructor count in
the first word of __CTOR_LIST__ was greater than zero before
traversing the list. I had added that check earlier, but it is no
longer necessary, now that there is guaranteed to be at least 2
words in __CTOR_LIST__.
It uses a static constructor to call _thread_init() at program start-up
time. That eliminates the need for any initialization hooks in crt0.o.
Added a symbol reference in "uthread_init.c", to ensure that the new
module will always be pulled in when the archive version of the library
is used.
In "Makefile.inc", defined CPLUSPLUSLIB, so that the constructor will be
properly invoked in the shared library.
Suggested by: Christopher Provenzano, Peter Wemm, and others.
for "fts_open" was wrong. Also, the "fts_info" field of the FTSENT
structure was misleadingly described as containing "flags". Actually, it
contains a single integer value.
in the main text of various man pages.
Thanks to Warner Losh for adding an option to manck to allow
it to scan the entire man page looking for bogus xrefs, instead
of just checking the SEE ALSO section.
resides in read-only memory is going to cause the program to core dump,
and this is commmon with older pre-ANSI C programs.
(I've scratched my head over this one at 3 in the morning before
while trying to port some ancient program)
Suggested by: Gary Kline <kline@tera.com>
- shared libraries are in ${SHLIBDIR}, not necessarily in ${LIBDIR}.
- don't remove or create any shared library versions except 2.0.
and improvements:
- don't use rm -r.
- indent the long shell command.
Submitted by: bde
Corrected some bogus cross references to man pages that we don't/won't
have and either deleted them, or found a more appropriate man page
that we do have. Various other minor changes to silence manck.
Manck is currently down to about 200 lines of errors, down from
the 500 - 600+ when I started all this.
Also corrected a few minor formatting errors, file location and cross
references in some of the section 3 man pages.
This shuts up a lot of the output from "manck" for section 3.
the loop that invokes the static constructors. That makes it safe
to link c++rt0.o into any shared library, even one that does not
have any static constructors. Formerly, doing that would cause a
bus error. If the library has no static constructors, __CTOR_LIST__
comes out as a simple 4-byte COMMON region, and it does not have
the usual NULL word that terminates the list of constructors. This
caused the old code to "call" a garbage address via the non-existent
entry __CTOR_LIST__[1].
The analogous code that invokes the static destructors was already safe.
This change is fully backward-compatible.
Reviewed by: dfr@render.com (Doug Rabson)
Install (optional) libutil.h with prototypes for the functions and
document this in the man page.
minor cleanups to the various routines, include the prototype file, declare
return codes etc.
of signals. Signals are now properly caught, tty state is being
restored, and the previous sigaction triggered. Upon receipt of a
sigcont, echo is turned off again.
SIGTSTP causes a buffer flush, the man page mentions this. (Although
i rather think of it as a feature than a bug.)
This is likely to be my last FreeBSD action for 1995, xearth shows
me that our .au guys must already write 1996. :-)
looking at a high resolution clock for each of the following events:
function call, function return, interrupt entry, interrupt exit,
and interesting branches. The differences between the times of
these events are added at appropriate places in a ordinary histogram
(as if very fast statistical profiling sampled the pc at those
places) so that ordinary gprof can be used to analyze the times.
gmon.h:
Histogram counters need to be 4 bytes for microsecond resolutions.
They will need to be larger for the 586 clock.
The comments were vax-centric and wrong even on vaxes. Does anyone
disagree?
gprof4.c:
The standard gprof should support counters of all integral sizes
and the size of the counter should be in the gmon header. This
hack will do until then. (Use gprof4 -u to examine the results
of non-statistical profiling.)
config/*:
Non-statistical profiling is configured with `config -pp'.
`config -p' still gives ordinary profiling.
kgmon/*:
Non-statistical profiling is enabled with `kgmon -B'. `kgmon -b'
still enables ordinary profiling (and distables non-statistical
profiling) if non-statistical profiling is configured.
is really necessary. Going backwards on a P6 is much slower than forwards
and it's a little slower on a P5. Also moved the count mask and 'std'
down a few lines - it's a couple percent faster this way on a P5.
replace the dozen other various hacks in the code that do all sorts
of crude things including spamming the envrionment strings with the new
argv string.
This version is mainly inspired by the sendmail version, with a couple of
ideas taken from the NetBSD implementation as well.
