Setting the dumpdev via env e.g. loader.conf provides the ability to
configure the kernel dump device during early boot. When using this
g_io_getattr was returning EPERM due to cp->acr == 0.
Fix this by calling g_access to ensure we're a read consumer prior
to calling g_dev_setdumpdev.
MFC after: 2 weeks
Sponsored by: Multiplay
* Ensure that error information isn't lost.
* Log the error code in all cases.
* Don't overwrite bio_completed set to 0 from the error condition.
MFC after: 2 weeks
Sponsored by: Multiplay
reads and writes.
PR: kern/198405
Submitted by: Matthew D. Fuller <fullermd at over-yonder dot net>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3679
Skip a /dev/ prefix, if one is present, when checking for matching
device names for dump.
Suggested by: avg
Reviewed by: markj
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3725
it possible to "simulate" 4K media, to eg test alignment handling.
Reviewed by: mav@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3664
broke in two ways. One, the pacing variable was accessed in multiple
threads in an unsafe way. Two, since large numbers of I/O could come
down from the buf layer at one time, large numbers of allocation
failures could happen all at once, resulting in a huge pace value that
would limit I/Os to 10 IOPS for minutes (or even hours) at a
time. While a real solution to these problems requires substantial
work (to go to a no-allocation after the first model, or to have some
way to wait for more memory with some kind of reserve for pager and
swapper requests), it is relatively easy to make this simplistic
pacing less pathological.
Move to using a volatile variable with loads and stores. While this is
a little racy, losing the race is safe: either you get memory and
proceed, or you don't and queue. Second, sleep for 1ms (or one tick, whichever
is larger) instead of 100ms. This removes the artificial 10 IOPS limit
while still easing up on new I/Os during memory shortages. Remove
tying the amount of time we do this to the number of failed requests
and do it only as long as we keep failing requests.
Finally, to avoid needless recursion when memory is tight (start ->
g_io_deliver() -> g_io_request() -> start -> ... until we use 1/2 the
stack), don't do direct dispatch while pacing. This should be a rare
event (not steady state) so the performance hit here is worth the
extra safety of not starving g_down() with directly dispatched I/O.
Differential Review: https://reviews.freebsd.org/D3546
Summary:
The RouterBoard uses a predefined partition map which doesn't exist in the fdt.
This change allows overriding the fdt slicer with a custom slicer, and uses this
custom slicer to define the flash map on the RouterBoard RB800.
D3305 converts the mpc85xx platform into a base class, so that systems based on
the mpc85xx platform can add their own overrides. This change builds on D3305,
and creates a RouterBoard (RB800) platform to initialize the slicer override.
Reviewed By: nwhitehorn, imp
Differential Revision: https://reviews.freebsd.org/D3345
Similar reasoning to what was done in r286367 with geom_uzip(4)
MFC after: 2 weeks
Differential Revision: D3320
Sponsored by: EMC / Isilon Storage Division
GELI is used on a SSD or inside virtual machine, so that guest can tell
host that it is no longer using some of the storage.
Enabling BIO_DELETE passthru comes with a small security consequence - an
attacker can tell how much space is being really used on encrypted device and
has less data no analyse then. This is why the -T option can be given to the
init subcommand to turn off this behaviour and -t/T options for the configure
subcommand can be used to adjust this setting later.
PR: 198863
Submitted by: Matthew D. Fuller fullermd at over-yonder dot net
This commit also includes a fix from Fabian Keil freebsd-listen at
fabiankeil.de for 'configure' on onetime providers which is not strictly
related, but is entangled in the same code, so would cause conflicts if
separated out.
reverted. We can do direct processing when g_io_check() does not need
to perform transient remapping of the bio, otherwise the thread has to
sleep.
Reviewed by: mav (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
so we cannot access it anymore. Setting an error later lead to memory
corruption.
Assert that crypto_dispatch() was successful. It can fail only if we pass a
bogus crypto request, which is a bug in the program, not a runtime condition.
PR: 199705
Submitted by: luke.tw
Reviewed by: emaste
MFC after: 3 days
as it is now, devfs ignores MNT_FORCE anyway, so it needs to be modified
to trigger the panic) with consumers still opened.
Note that this still results in a leak of r/w/e counters. It seems
to be harmless, though. If anyone knows a better way to approach
this - please tell.
Discussed with: kib@, mav@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3050
a single space (" ") as a CD9660 label name when no label was present.
Similar problem was also present in msdosfs label recognition.
PR: 200828
Differential Revision: https://reviews.freebsd.org/D2830
Reviewed by: asomers@, emaste@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
MAXPHYS. For large compressed images the metadata size can be bigger
than MAXPHYS and this triggers KASSERT in g_read_data().
Also use g_free() to free memory allocated by g_read_data().
PR: 199476
MFC after: 2 weeks
It is not network-specific code and would
be better as part of libkern instead.
Move zlib.h and zutil.h from net/ to sys/
Update includes to use sys/zlib.h and sys/zutil.h instead of net/
Submitted by: Steve Kiernan stevek@juniper.net
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/28
Relnotes: yes
When CPU is not busy, those queues are typically empty. When CPU is busy,
then one more extra sorting is the last thing it needs. If specific device
(HDD) really needs sorting, then it will be done later by CAM.
This supposed to fix livelock reported for mirror of two SSDs, when UFS
fires zillion of BIO_DELETE requests, that totally blocks I/O subsystem by
pointless sorting of requests and responses under single mutex lock.
MFC after: 2 weeks
* Just do the buf check early and fail out
* If the offset being searched is:
00110000 00 b5 7e 45 61 e2 76 d3 c1 78 dd 15 95 cd 1f f1 |..~Ea.v..x......|
.. and the match string is '.!/bin/sh'
.. then it'll set the match string[0] to '\0', do a strncmp() against
the read buffer, find it's matching two zero-length strings, and think
that's where to start.
MFC after: 2 weeks
Do not report GEOM::candelete if none of providers support BIO_DELETE.
If consumer still requests BIO_DELETE, report error instead of hanging.
MFC after: 2 weeks
have been in the base for a while, so the gymnastics here aren't
needed. In addition, the bugs in subr_disk.c have been fixed since
2009, so there's no need for an identical copy of it in the tree
anymore. There's really no need to binary patch g_io_request, so let's
get rid of the code (not compiled in anymore) lest others think it is
a good idea.
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
partitions. Several utilities still use this interface and require
additional information since gpart was activated than before. This
allows fsck of a UFS partition without having to specify it is UFS,
per historic behavior.
was possible for a regular user to setup the dump device if he had write access
to the given device. In theory it is a security issue as user might get access
to kernel's memory after provoking kernel crash, but in practise it is not
recommended to give regular users direct access to storage devices.
Rework the code so that we do privileges check within the set_dumper() function
to avoid similar problems in the future.
Discussed with: secteam
