r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
reudundant complicated checks and additional locking required only for
anonymous memory. Introduce vm_object_allocate_anon() to create these
objects. DEFAULT and SWAP objects now have the correct settings for
non-anonymous consumers and so individual consumers need not modify the
default flags to create super-pages and avoid ONEMAPPING/NOSPLIT.
Reviewed by: alc, dougm, kib, markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22119
Historically we have not distinguished between kernel wirings and user
wirings for accounting purposes. User wirings (via mlock(2)) were
subject to a global limit on the number of wired pages, so if large
swaths of physical memory were wired by the kernel, as happens with
the ZFS ARC among other things, the limit could be exceeded, causing
user wirings to fail.
The change adds a new counter, v_user_wire_count, which counts the
number of virtual pages wired by user processes via mlock(2) and
mlockall(2). Only user-wired pages are subject to the system-wide
limit which helps provide some safety against deadlocks. In
particular, while sources of kernel wirings typically support some
backpressure mechanism, there is no way to reclaim user-wired pages
shorting of killing the wiring process. The limit is exported as
vm.max_user_wired, renamed from vm.max_wired, and changed from u_int
to u_long.
The choice to count virtual user-wired pages rather than physical
pages was done for simplicity. There are mechanisms that can cause
user-wired mappings to be destroyed while maintaining a wiring of
the backing physical page; these make it difficult to accurately
track user wirings at the physical page layer.
The change also closes some holes which allowed user wirings to succeed
even when they would cause the system limit to be exceeded. For
instance, mmap() may now fail with ENOMEM in a process that has called
mlockall(MCL_FUTURE) if the new mapping would cause the user wiring
limit to be exceeded.
Note that bhyve -S is subject to the user wiring limit, which defaults
to 1/3 of physical RAM. Users that wish to exceed the limit must tune
vm.max_user_wired.
Reviewed by: kib, ngie (mlock() test changes)
Tested by: pho (earlier version)
MFC after: 45 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19908
Expose these counters under the vm.domain sysctl node. The existing
vm.stats.vm.v_pdpages sysctl is preserved.
Reviewed by: alc (previous version)
Differential Revision: https://reviews.freebsd.org/D14666
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
use it to regulate page daemon output.
This provides much smoother and more responsive page daemon output, anticipating
demand and avoiding pageout stalls by increasing the number of pages to match
the workload. This is a reimplementation of work done by myself and mlaier at
Isilon.
Reviewed by: bsdimp
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14402
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
hardware sizes.
32bit counters already overflow on approachable virtual memory page
counts, and soon would overflow on the physical pages counts as well.
Bump sizes to 64bit types. Bump __FreeBSD_version.
It is impossible to provide perfect backward ABI compat for this
change. If a program requests an old structure, it can be detected by
size. But if it queries the size first by passing NULL old req
pointer, there is almost nothing we can do to detect the desired ABI.
As a partial solution, check p_osrel of the quering process when
selecting the size to report.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Differential revision: https://reviews.freebsd.org/D13018
Prior to the change they were subject to extreme false sharing.
In particular this change shaves about 3 seconds real time of -j 80 buildkernel.
Reviewed by: alc, markj
Differential Revision: https://reviews.freebsd.org/D12281
This restores 32bit-sized accesses to vmcnt sysctls, making old
binaries like top(1), systat(8) and reboot(8) mostly functional on
newer kernel.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
There are two instances of inlined unlocks + continue in vmtotal()
switch statements, which are ordinary expressed with break from the
switch case and code after the switch. Also, the combination of
continue and break statement is redundand.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Some utilities (notably top(1)) exit if any of their input sysctls don't
exist, and the removal of the above-mentioned PG_CACHE-related sysctls
makes it difficult to run such utilities on different versions of the
kernel without recompiling.
Requested by: bde
longer used. More precisely, they are always zero because the code that
decremented and incremented them no longer exists.
Bump __FreeBSD_version to mark this change.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8583
pages, specificially, dirty pages that have passed once through the inactive
queue. A new, dedicated thread is responsible for both deciding when to
launder pages and actually laundering them. The new policy uses the
relative sizes of the inactive and laundry queues to determine whether to
launder pages at a given point in time. In general, this leads to more
intelligent swapping behavior, since the laundry thread will avoid pageouts
when the marginal benefit of doing so is low. Previously, without a
dedicated queue for dirty pages, the page daemon didn't have the information
to determine whether pageout provides any benefit to the system. Thus, the
previous policy often resulted in small but steadily increasing amounts of
swap usage when the system is under memory pressure, even when the inactive
queue consisted mostly of clean pages. This change addresses that issue,
and also paves the way for some future virtual memory system improvements by
removing the last source of object-cached clean pages, i.e., PG_CACHE pages.
The new laundry thread sleeps while waiting for a request from the page
daemon thread(s). A request is raised by setting the variable
vm_laundry_request and waking the laundry thread. We request launderings
for two reasons: to try and balance the inactive and laundry queue sizes
("background laundering"), and to quickly make up for a shortage of free
pages and clean inactive pages ("shortfall laundering"). When background
laundering is requested, the laundry thread computes the number of page
daemon wakeups that have taken place since the last laundering. If this
number is large enough relative to the ratio of the laundry and (global)
inactive queue sizes, we will launder vm_background_launder_target pages at
vm_background_launder_rate KB/s. Otherwise, the laundry thread goes back
to sleep without doing any work. When scanning the laundry queue during
background laundering, reactivated pages are counted towards the laundry
thread's target.
In contrast, shortfall laundering is requested when an inactive queue scan
fails to meet its target. In this case, the laundry thread attempts to
launder enough pages to meet v_free_target within 0.5s, which is the
inactive queue scan period.
A laundry request can be latched while another is currently being
serviced. In particular, a shortfall request will immediately preempt a
background laundering.
This change also redefines the meaning of vm_cnt.v_reactivated and removes
the functions vm_page_cache() and vm_page_try_to_cache(). The new meaning
of vm_cnt.v_reactivated now better reflects its name. It represents the
number of inactive or laundry pages that are returned to the active queue
on account of a reference.
In collaboration with: markj
Reviewed by: kib
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8302
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.
Reviewed by: alc, imp, kib
Differential Revision: https://reviews.freebsd.org/D7714
statistics. Marking is done by setting the OBJ_ACTIVE flag. The
flags change is locked, but the problem is that many parts of system
assume that vm object initialization ensures that no other code could
change the object, and thus performed lockless. The end result is
corrupted flags in vm objects, most visible is spurious OBJ_DEAD flag,
causing random hangs.
Avoid the active object marking, instead provide equally inexact but
immutable is_object_alive() definition for the object mapped state.
Avoid iterating over the processes mappings altogether by using
arguably improved definition of the paging thread as one which sleeps
on the v_free_count.
PR: 204764
Diagnosed by: pho
Tested by: pho (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
This is ok since objects come from a NOFREE zone and allows objects to
be locked while traversing the object list without triggering a LOR.
Ensure that objects on the list are marked DEAD while free or stillborn,
and that they have a refcount of zero. This required updating most of
the pagers to explicitly mark an object as dead when deallocating it.
(Only the vnode pager did this previously.)
Differential Revision: https://reviews.freebsd.org/D2423
Reviewed by: alc, kib (earlier version)
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc.
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages. In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.
To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.
Reviewed and tested by: kib
- Hold the proc lock while changing the state from PRS_NEW to PRS_NORMAL
in fork to honor the locking requirements. While here, expand the scope
of the PROC_LOCK() on the new process (p2) to avoid some LORs. Previously
the code was locking the new child process (p2) after it had locked the
parent process (p1). However, when locking two processes, the safe order
is to lock the child first, then the parent.
- Fix various places that were checking p_state against PRS_NEW without
having the process locked to use PROC_LOCK(). Every place was already
locking the process, just after the PRS_NEW check.
- Remove or reduce the use of PROC_SLOCK() for places that were checking
p_state against PRS_NEW. The PROC_LOCK() alone is sufficient for reading
the current state.
- Reorder fill_kinfo_proc() slightly so it only acquires PROC_SLOCK() once.
MFC after: 1 week
a device pager (OBJT_DEVICE) object in that it uses fictitious pages to
provide aliases to other memory addresses. The primary difference is that
it uses an sglist(9) to determine the physical addresses for a given offset
into the object instead of invoking the d_mmap() method in a device driver.
Reviewed by: alc
Approved by: re (kensmith)
MFC after: 2 weeks
inside the SYSCTL() macros and thus does not need to be done for
all of the nodes scattered across the source tree.
- Mark the name-cache related sysctl's (including debug.hashstat.*) MPSAFE.
- Mark vm.loadavg MPSAFE.
- Remove GIANT_REQUIRED from vmtotal() (everything in this routine already
has sufficient locking) and mark vm.vmtotal MPSAFE.
- Mark the vm.stats.(sys|vm).* sysctls MPSAFE.
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
sched_sleep(). This removes extra thread_lock() acquisition and
allows the scheduler to decide what to do with the static boost.
- Change the priority arguments to cv_* to match sleepq/msleep/etc.
where 0 means no priority change. Catch -1 in cv_broadcastpri() and
convert it to 0 for now.
- Set a flag when sleeping in a way that is compatible with swapping
since direct priority comparisons are meaningless now.
- Add a sysctl to ule, kern.sched.static_boost, that defaults to on which
controls the boost behavior. Turning it off gives better performance
in some workloads but needs more investigation.
- While we're modifying sleepq, change signal and broadcast to both
return with the lock held as the lock was held on enter.
Reviewed by: jhb, peter
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
vmspace_exitfree() and vmspace_free() which could result in the same
vmspace being freed twice.
Factor out part of exit1() into new function vmspace_exit(). Attach
to vmspace0 to allow old vmspace to be freed earlier.
Add new function, vmspace_acquire_ref(), for obtaining a vmspace
reference for a vmspace belonging to another process. Avoid changing
vmspace refcount from 0 to 1 since that could also lead to the same
vmspace being freed twice.
Change vmtotal() and swapout_procs() to use vmspace_acquire_ref().
Reviewed by: alc
