Commit Graph

280 Commits

Author SHA1 Message Date
imp
acd58ea001 Add MELCO LPC3_CTX. This is the same as Buffalo card of the same name
with different vendor id.

Submitted by: Shizuka Kudo-san
2003-08-07 19:40:05 +00:00
jhb
37641f86f1 Consistently use the BSD u_int and u_short instead of the SYSV uint and
ushort.  In most of these files, there was a mixture of both styles and
this change just makes them self-consistent.

Requested by:	bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
bde
7881c7578f Don't use pessimal (u_short) types for i/o ports. This is mainly for
completenss.  The pessimization is tiny compared with i/o port slowness
except on very old machines, but code that used signed short types for
i/o ports was unpessimized long ago, and the macro that detected it
recently started working for u_short types too.  Use of bus space
should have made this moot long ago.

Not tested at runtime by:  bde
2003-08-06 18:06:30 +00:00
imp
86059bdf66 The LP_ETH_10_100_CF entry needs to be tagged as a DL100019.
Submitted by: Scott Renfro
2003-07-28 00:07:58 +00:00
imp
2cb639738f Add Socket Communications Low Power 10/100 CF Ethernet card.
Obtained from: NetBSD (information, not code)
2003-07-26 17:52:09 +00:00
imp
748ab55eaa Add support for BUFFALO LPC3-CLX 10/100Base-T PC-Card
PR: 47786
Submitted by: IHA, genta -san
2003-07-19 05:36:09 +00:00
mdodd
261178d14f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
imp
0e02966daf SMC 8041 is the same thing as LINKSYS COMBO_ECARD, so no extra entry
is required.  NetBSD has one because it checks for the mac address
match as well wanting to give its own string in the description.
Since we do neither, we don't need a separate entry.

# I suspect that a few of the COREGA cards might fall into that category
# as well, but since I don't have access to any of them it is hard to know
# for sure.
2003-04-10 07:35:19 +00:00
imp
a40639441e Add Billionton CFLT10N and SMC8041 (although I'm not 100% sure the latter is
needed).  Remove duplicate kingston kne2 entry.

Info obtained from NetBSD
2003-04-10 07:24:18 +00:00
imp
a5a1d8dd18 reorganize the supported card table. We don't need the enet_vendor or
enet_mcast fields, so remove them.  Sort.  Eliminate now duplicate
entries.

This reorg saves about 500 bytes in the binary.  I've tested this only
with a couple of cards, so please let me know if I've broken anything.
2003-04-10 07:04:39 +00:00
imp
93c16cf29a Don't set the description if NULL. 2003-04-10 06:08:27 +00:00
cognet
975f6df38d Fix ed compilation with PAE by using %jx instead of %x. 2003-04-05 18:12:36 +00:00
sanpei
4ea6a23f8d Add NE2000DVF_AX88190 flag to Corega FEther PCC-TXD
(see also /etc/defaults/pccard.conf rev.1.172)
2003-04-04 14:46:50 +00:00
jake
783ae539c3 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
nyan
6713e026ef Fix printf format error. 2003-02-24 14:32:27 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
shiba
f5d96fabf6 Add BUFFALO LPC-CF-CLT(10Base-T Compact Flash Ether Card). 2003-01-18 02:14:23 +00:00
schweikh
d3367c5f5d Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
sam
14c32b5f40 network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
imp
3339dd55d9 add some devices from NetBSD 2002-10-11 07:03:09 +00:00
brooks
14e083a35a Use if_printf() instead of printf() to print "ed#: blah". 2002-10-01 00:49:28 +00:00
imp
f88281a4a8 mbuf leak in the error case has been fixed. When we have
an error, go ahead and m_freem the buffer.

PR: 32666
Submitted by: Chi-Fung Fan
2002-09-30 00:18:12 +00:00
phk
1dfc2c167f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
takawata
2584e4dbea Add ALLIED TELESIS,K.K. LA-ISA V2 ISA PnP ID.
Submitted by:	nork
MFC after: 3 days
2002-07-26 17:33:58 +00:00
imp
29d1e263c1 integrate from p4 repo:
o Honor NE2000DVF_{AX88190,DL10019} flags by setting the ED_FLAGS_xxxx
  flag.
o Mark linksys combo_ecard as ax88190
o Set the type_str to AX88190 for the ax88190 cards.

This fixes ax88190 based cards, for the most part, but doesn't seem to fix
the mii based dl10019 cards (aka linksys cards).
2002-07-22 21:28:46 +00:00
imp
66063ff556 More newcard devices:
Netgear FA-410TXC
	Netgear FA-411
	Lantech Fastnet TX
	Linksys pcm100
Hide the total wildcard device for SVEC too :-(

Obtained from: NetBSD/OpenBSD
2002-04-02 05:52:52 +00:00
alfred
3264aec746 Remove __P. 2002-03-20 02:08:01 +00:00
imp
1c4600ced3 Add EDIMAX ethernet card for NEWCARD from NetBSD 2002-01-29 07:08:56 +00:00
imp
55262e3b08 Patch to allow the ed driver interrupt routine to terminate if the
card is ejected while we're in this routine.

yamamoto-san's original patch had a small race window for AX88190
chips, which I corrected by limiting the number of iterations we'd try
to reset the bits to be about 15ms rather than forever.  This seems to
work for me, but I don't have a large collections of cards based on
this chipset.

Submitted by:	YAMAMOTO Shigeru
2001-11-24 16:15:18 +00:00
imp
3212bd4f7f Comment out some bogus entries. somehow they match everything, which
is bad.  I need to correct pccarddev, but I'm not sure how just at the
moment.  So I'm firewalling the damage.
2001-11-20 06:18:36 +00:00
imp
246c6c7de1 MF NetBSD's if_ne_pcmcia.c rev 1.82's list of devices 2001-11-15 08:15:44 +00:00
imp
6fdb4db61f Migrate to PCMCIA_CARD() macros 2001-11-15 07:52:49 +00:00
imp
249aae3888 s/PCCARD_/PCMCIA_/g in NEWCARD device tables to enable easier NetBSD sharing 2001-11-11 20:17:10 +00:00
luigi
f565e0a1df MFS: sync the ipfw/dummynet/bridge code with the one recently merged
into stable (mostly , but not only, formatting and comments changes).
2001-11-04 22:56:25 +00:00
luigi
f10c64732a Always compile in bridge hooks, or this code will not work (efficiently) with
the loadable bridge module.
2001-11-01 17:10:52 +00:00
asmodai
460dbf267c Fix obvious bug where return from probe was botched.
People with HP PCLAN+ NICs can now happily use the card again

PR:		21087
Submitted by:	M. B. Buchanan <buchanan@orbitworld.net>
2001-10-31 19:43:33 +00:00
luigi
f6153dda13 Make this compile again after the changes to make bridge kld'able 2001-10-07 00:18:48 +00:00
iedowse
20a6cccd28 Add an option ED_NO_MIIBUS, which causes the `ed' driver to be
built without support for miibus PHYs. Most ed cards don't need
miibus support, so it's useful to be able to avoid the bloat of
all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00
iedowse
08e82b6d3d Add a few missing spl calls in preparation for an MFC of the miibus
support.
2001-07-22 21:39:54 +00:00
iedowse
25fd88c17a Remove an old hack that remembered if the card type was Linksys by
storing a flag in the global variable 'linksys' during the probe
routine and reading it during the attach routine. We now have the
ED_VENDOR_LINKSYS vendor code stored in sc->vendor, so check that
instead.
2001-07-22 21:31:44 +00:00
iedowse
6e2ef43eed Attach the miibus for Linksys/Dlink cards from the attach routine,
not from the probe routine. This was an oversight when I originally
ported the miibus support to -current, though it was mostly harmless.

We now set the vendor code to the new value ED_VENDOR_LINKSYS in
ed_pccard_Linksys() at probe time. Then ed_pccard_attach() checks
the vendor code, and sets up the miibus if appropriate.

Reviewed by:	imp
2001-07-22 18:58:44 +00:00
imp
c2257f6c8a Add support for Dlink DL10022 to the ed driver. This is a mii part
bolted to a ne-2000 chip.  This is necessary for the NetGear FA-410TX
and other cards.

This also requires you add mii to your kernel if you have an ed driver
configured.

This code will result in a couple of timeout messages for ed on the
impacted cards.  Additional work will be needed, but this does work
right now, and many people need these cards.

Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
2001-03-03 08:31:37 +00:00
luigi
38a15079cd Whoops... forgotten a few pieces in previous patch:
* a ">" is really ">=" ;
 * do not try to fetch zero-sized blocks from the card;
 * make sure that bpf gets the packets it wants even with
   bridging active;
2001-02-08 22:54:57 +00:00
luigi
d0c5714da1 Make sure that we do not accept packets shorter than a full ethernet
header, or we would have a negative length passed to ether_input().
2001-02-08 22:21:30 +00:00
phk
d214ae2171 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
asmodai
e69fe706f1 Fix typo: wierd -> weird.
There is no such thing as wierd in the english language.
2001-02-06 09:25:10 +00:00
phk
709379c1ae Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
phk
e87f7a15ad Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
imp
dd1ea82faf Add a bunch of entries from NetBSD's if_ne_pcmcia.c v1.67. We still
need to verify that all the entries in pccard.conf are present in this
table.
2001-01-21 08:20:23 +00:00