When allocating a new mbuf or bus_dmamap_load()-ing it fails,
we can just keep the old mbuf since we are dropping that packet anyway.
Instead of doing bus_dmamap_create() and bus_dmamap_destroy() all the time,
create an extra bus_dmamap_t which we can use to safely try
bus_dmamap_load()-ing the new mbuf. On success we just swap the spare
bus_dmamap_t with the data->map of that ring entry.
Tested:
Tested with Intel AC7260, verified with vmstat -m that new kernel no
longer visibly leaks memory from the M_DEVBUF malloc type.
Before, leakage was 1KB every few seconds while ping(8)-ing over the wlan
connection.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re@
Obtained from: DragonflyBSD.git cc440b26818b5dfdd9af504d71c1b0e6522b53ef
Differential Revision: https://reviews.freebsd.org/D6742
For DWC_GMAC_ALT_DESC implementations, the multicast hash table has only
64 entries. Instead of 8 registers starting at 0x500, a pair of registers
at 0x08 and 0x0c are used instead.
Approved by: re (hrs)
Submitted by: Guy Yur <guyyur@gmail.com>
the loop in linprocfs_doswaps() is useless.
List of the registered filesystems is protected by vfsconf_sx,
not by the Giant. Adjust linprocfs_dofilesystems() correspondingly.
Approved by: re (delphij), des (linprocfs maintainer)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
default. At least initially, the feature to support multiple TCP stacks is
aimed at supporting advanced use cases and TCP development, but it is not
necessarily aimed at a wide audience. Therefore, there is no need to build
and install the extra TCP stacks by default. Instead, the people who are
using or developing this functionality can add the extra option to build/
install the extra TCP stacks.
However, we do want to build the extra TCP stacks as part of test builds
(e.g. LINT or tinderbox) to ensure that developers who are testing their
changes will know that their changes do not break the additional TCP
stack modules.
After this change, a user will need to add WITH_EXTRA_TCP_STACKS=1 to
make.conf or the kernel config in order to build the extra TCP modules.
Differential Revision: https://reviews.freebsd.org/D6795
Reviewed by: sjg
Approved by: re (kib)
Similar to r300836, cl and ct will always be non-NULL as they're allocated
using the mem_alloc routines, which always use `malloc(..., M_WAITOK)`.
Deobfuscating the cleanup path fixes a leak where if cl was NULL and
ct was not, ct would not be free'd, and also removes a duplicate test for
cl not being NULL.
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6801
MFC after: 1 week
Reported by: Coverity
CID: 1229999
Reviewed by: cem
Sponsored by: EMC / Isilon Storage Division
Some later code I'll commit pushes lists of frames into the EDMA TX
FIFO, rather than a single frame at a time. The CABQ code already
pushes frame lists, but it turns out we should actually be doing it
in general or performance tanks. :(
Since key table is cleared on every device shutdown,
static WEP keys (which are set only once) need to be
reinstalled manually every time when device starts running.
Tested with RTL8188EU, STA (all ciphers) / IBSS (WPA-none) modes.
The allproc_lock lock used in the sysctl_kern_corefile function is initialized
in the procinit function which is called after setting sysctl values at boot.
That means if we set kern.corefile at boot we will be trying to use
lock with is uninitialized and machine will crash.
If we define kern.corefile as tunable instead of using CTFLAG_RWTUN we will
not call the sysctl_kern_corefile function and we will not use an uninitialized
lock. When machine will boot then we will start using function depending on
the lock.
Reviewed by: pjd
by holding allprison_lock exclusively (even if only for a moment before
downgrading) on all paths that call PR_METHOD_REMOVE. Since they may run
on a downgraded lock, it's still possible for them to run concurrently
with PR_METHOD_GET, which will need to use the prison lock.
r298930 removed the inittodr call, but it seems like this prevents
"calcru: runtime went backwards ..." messages from occasionally appearing
when resuming from migration.
Reported by: Karl Pielorz <kpielorz@tdx.co.uk>
Sponsored by: Citrix Systems R&D
Do not try to pass such frames; a correct frame cannot be smaller than
(the corresponding) header size.
(for wpi(4) an additional check was added in r289012).
PR: 144987
ticks are signed int and if statistics is not updated for a long time
(more than INT_MAX ticks, but less than UINT_MAX) difference becomes
negative and less than hz for a long time.
Other option to repeat is simply load driver (which initializes
timestamps to 0) when ticks are negative.
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6777
Remove 'if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);' from raw xmit
and apbridge path; it will be incremented by ieee80211_tx_complete()
after packet transmission.
Noticed by: Imre Vadasz <imre@vdsz.com>
This fixes a warning that occurs in a number of files that use the
random_harvest_queue function.
Differential Revision: https://reviews.freebsd.org/D4229
Submitted by: stevek@juniper.net
Reviewed by: markm
Approved by: so
where we assumed TERM_EMU was defined but didn't check. Fix these by also
including them under the ifdefs.
As HO is called from loader we need a null implementation so loader.efi
doesn't need to know which version of libefi it is building against.
Sponsored by: ABT Systems Ltd
Changes:
- Fixed incorrect MIPS74k vendor ID in the bhnd core descriptor tables
- Fixed MIPS core driver's matching against MIPS/MIPS33 cores.
- Improved MIPS3302 core description.
- Enabled BUS_PASS_BUS on the bhnd nexus drivers to allow early probing
of the MIPS core.
- Enabled BUS_PASS_CPU on the MIPS core driver to ensure correct attach
order.
- Disabled matching of the MIPS core driver on non-SoC devices.
Reviewed by: Michael Zhilin <mizhka@gmail.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6735
This is in preparation for some other TDMA fixes which will hopefully
end with having working TDMA.
But, it does avoid lots of read/modify/writes in the txq setup path.
* Allow readyTime to just be programmed in directly
* The beacon interval and all of the beacon timing sysctl's are in TU,
not TSF. So, we were doing the wrong math on the CAB programming
in the first place.
