6349 Commits

Author SHA1 Message Date
lidl
cb2fd85b37 Separate BLACKLIST vs BLACKLIST_SUPPORT properly
Sponsored by:	The FreeBSD Foundation
2016-06-07 16:31:03 +00:00
lidl
a61869785b Turn off blacklistd daemon in defaults
Reported by:	Matteo Riondato ( matteo @ FreeBSD.org )
Reviewed by:	rpaulo
Approved by:	rpaulo
Relnotes:	YES
Sponsored by:	The FreeBSD Foundation
2016-06-06 17:01:35 +00:00
araujo
7552ed7502 Connect ypldap(8) script on Makefile, forgotten on my previous commit r301480. 2016-06-06 04:13:49 +00:00
araujo
43084d2f1d Add rc.d script for ypldap(8). 2016-06-06 03:55:00 +00:00
araujo
0f769a7b93 Install/Connect ypldap.conf(5) on examples. 2016-06-06 02:43:41 +00:00
cy
ee7dbd3e0c Enable daily_ntpd_leapfile_enable by default. Otherwise an expired
leapfile will be ignored and ntpd will behave as if it has no
leapfile.

While here, remove an extraneous blank line.

Suggested by:	ache
MFC after:	1 week
2016-06-04 01:01:46 +00:00
lidl
6f31a383cc Add basic blacklist build support
Reviewed by:	rpaulo
Approved by:	rpaulo
Relnotes:	YES
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D5913
2016-06-02 19:06:04 +00:00
asomers
944327caa7 Fix exit status of "service routing start <af> <iface>"
etc/rc.d/routing
	Ignore the exit status of options_{inet,inet6,atm}. It's
	meaningless.

Reviewed by:	hrs
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D6687
2016-06-02 15:31:24 +00:00
gjb
fe5676baea Revert r301137 and r301163, and implement a correct fix
for the CONFS issue with dma.conf and ppp.conf.

Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.

Pointyhat:	gjb
Sponsored by:	The FreeBSD Foundation
2016-06-01 20:44:28 +00:00
gjb
693109989c Implement a hack to re-enable installation of the dma.conf.
The 'CONFS' entries in share/mk/bsd.confs.mk explicitly check
for the 'installconfig', but does not behave properly with the
'distribute' target.

This seems to be related to the previously-reported issues
with files within /etc in the past.

Reported by:	Ben Woods
Sponsored by:	The FreeBSD Foundation
2016-06-01 20:06:55 +00:00
gjb
17c4d27bf8 Revert r289096:
Files listed in 'CONFS' are not properly included in new
installations (missing from base.txz), for reasons I still
do not fully understand.

This reverts the change excluding /etc/ppp/ppp.conf from
a new installation.  /etc/dma/dma.conf is also affected,
but requires a different solution, still being investigated.

Reported by:	Ben Woods
Sponsored by:	The FreeBSD Foundation
2016-06-01 16:45:08 +00:00
cy
a47611b5e6 Don't rely on $ntpd_enable to periodically fetch the latest
leapfile.

Suggested by:	cperciva
MFC after:	1 week
2016-06-01 04:37:43 +00:00
vangyzen
14093b648e Fix indentation in dhclient rc.d script 2016-05-31 18:40:47 +00:00
trasz
7f0b38609f Cosmetics: add missing space after the ':' in etc/rc.d/random.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-05-31 08:31:34 +00:00
ngie
4540590873 Fix circular dependency created after r287197 between ldconfig and mountcritremote
ldconfig is already required by mountcritremote indirectly, as noted by rcorder:

> rcorder: Circular dependency on provision `mountcritremote' in file `ldconfig'.

Having mountcritremote REQUIRE ldconfig breaks dependency ordering.

Making the ldconfig hints be conditionally regenerated from mountcritremote when
remote filesystems are mounted is done after this change, similar to cleanvar
being conditionally called after the change.

Differential Revision: https://reviews.freebsd.org/D6621
PR: 202726
Reviewed by: jilles
Sponsored by: EMC / Isilon Storage Division
2016-05-30 19:59:51 +00:00
ngie
1f776afa1c Make netif REQUIRE hostid
As noted in the PR, if etc/rc.d/zvol is removed, netif will be run before
hostid, and the MAC address generated for any bridge devices will be
non-deterministic. Make the MAC address generated be deterministic for
bridge devices by explicitly REQUIRE'ing hostid.

This fixes up the rest of the PR, inadvertently committed in r299844

MFC after: 1 week
PR: 195188
Sponsored by: EMC / Isilon Storage Division
2016-05-29 02:59:03 +00:00
ngie
f09d81c417 Fix "make installworld" with MK_CDDL == no after r300906 by
adding a missing entry for ${TESTSBASE}/cddl/sbin

X-MFC with: r300906
Pointyhat to: asomers
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
Sponsored by: EMC / Isilon Storage Division
2016-05-29 01:38:12 +00:00
asomers
442baa5184 zfsd(8), the ZFS fault management daemon
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.

cddl/usr.sbin/zfsd
	Add zfsd(8) and its unit tests

cddl/usr.sbin/Makefile
	Add zfsd to the build

lib/libdevdctl
	A C++ library that helps devd clients process events

lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
	Add libdevdctl to the build. It's a private library, unusable by
	out-of-tree software.

etc/defaults/rc.conf
	By default, set zfsd_enable to NO

etc/mtree/BSD.include.dist
	Add a directory for libdevdctl's include files

etc/mtree/BSD.tests.dist
	Add a directory for zfsd's unit tests

etc/mtree/BSD.var.dist
	Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
	down.

etc/rc.d/Makefile
etc/rc.d/zfsd
	Add zfsd's rc script

sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
	Fix the resource.fs.zfs.statechange message. It had a number of
	problems:

	It was only being emitted on a transition to the HEALTHY state.
	That made it impossible for zfsd to take actions based on drives
	getting sicker.

	It compared the new state to vdev_prevstate, which is the state that
	the vdev had the last time it was opened.  That doesn't make sense,
	because a vdev can change state multiple times without being
	reopened.

	vdev_set_state contains logic that will change the device's new
	state based on various conditions.  However, the statechange event
	was being posted _before_ that logic took effect.  Now it's being
	posted after.

Submitted by:	gibbs, asomers, mav, allanjude
Reviewed by:	mav, delphij
Relnotes:	yes
Sponsored by:	Spectra Logic Corp, iX Systems
Differential Revision:	https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
asomers
6ee2220242 Always create loopback routes on every fib
Always create loopback routes on every fib, for both IPv4 and IPv6

etc/rc.d/routing
	Create loopback IPv4 and IPv6 routes on every fib at boot. Revert
	278302; now that all FIBs have IPv6 loopback routes, the
	"route add -reject" commands won't fail.

tests/etc/rc.d/routing_test.sh
	Greatly simplify static_ipv6_loopback_route_for_each_fib. It was
	written under the assumption that loopback routes would be added to
	a given fib by the kernel as soon as an interface is configured on
	that fib. However, the logic can be much simpler now that we simply
	add loopback routes to all fibs at boot. This also removes the need
	to run the test as root, removes the restriction that
	net.add_addr_allfibs=0, and removes the need to configure fibs in
	kyua.conf.

	Also, add a test case for IPv4 loopback routes

Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D6582
2016-05-27 22:40:40 +00:00
cy
e825b90448 Use the expiry date to determine whether to replace the DB copy of
leapfile instead of using the leapfile serial number (create
timestamp).

PR:		209577
MFC after:	3 days
2016-05-25 01:35:02 +00:00
asomers
4e1ba42e3d Better document security_show_{success,info,badconfig} in /etc/periodic.conf
periodic(8) already handles the security_show_{success,info,badconfig}
variables correctly. However, those variables aren't explicitly set in
/etc/defaults/periodic.conf or anywhere else, which suggests to the user
that they shouldn't be used.

etc/defaults/periodic.conf
	Explicitly set defaults for security_show_{success,info,badconfig}

usr.sbin/periodic/periodic.sh
	Update usage string

usr.sbin/periodic/periodic.8
	Minor man page updates

One thing I'm _not_ doing is recommending setting security_output to
/var/log/security.log or adding that file to /etc/newsyslog.conf, because
periodic(8) would create it with default permissions, usually 644, and
that's probably a bad idea.

Reviewed by:	brd
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D6477
2016-05-21 02:14:11 +00:00
gnn
63c3e2f6af Remove DTrace tooklkit from the mtree and add the files to remove
to the ObsoleteFiles list.

Sponsored by:	DARPA, AFRL
2016-05-20 01:38:31 +00:00
cy
b856ea078e Update leap-seconds to leap-seconds.3661459200.
NO leap second will be introduced at the end of June 2016.

This commit reapplies the r298887 minor spelling fix.

Obtained from:	ftp://tycho.usno.navy.mil/pub/ntp/.
See also:	http://www.iers.org/SharedDocs/News/EN/BulletinC.html
MFC after:	2 weeks
2016-05-19 03:56:07 +00:00
ngie
063f41234a Make hostid_save depend on hostid
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2016-05-15 06:00:13 +00:00
ngie
98b1f51e3c Fix broken dependency with routed when MK_ROUTED != no
Remove routed as a requirement in NETWORKING, and put it in routed as a BEFORE
requirement instead

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2016-05-15 05:45:54 +00:00
ngie
79f608b18c Conditionalize installing etc/rc.d/atm{1,2,3}
`BEFORE: netif` was already in etc/rc.d/atm1, so no additional changes
are needed in that script

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2016-05-15 05:38:47 +00:00
ngie
b71e18cd9f Conditionalize etc/rc.d/{zfs,zvol} install on MK_ZFS != no
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2016-05-15 04:39:36 +00:00
ngie
5800a2cb91 Make FILESYSTEMS, dumpon, and var not depend on zfs and zvol
Make zfs and zvol come before all of the items that depended on them
previously

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2016-05-15 04:38:50 +00:00
ngie
b5d905de20 Reduce redundancy after release-pkg merge to head in r298107
- Use BINDIR instead of FILESDIR
- Default all <FILESGROUPS>MODEs to BINMODE with a single for-loop at the
  bottom of the Makefile
- Move all of the conditionals under the relevant MK_* != no build conditional
  blocks

Sponsored by: EMC / Isilon Storage Division
2016-05-15 04:19:50 +00:00
vangyzen
2773c65343 iconvctl(3): remove superfluous NULL pointer tests
convname and dst are guaranteed to be non-NULL by iconv_open(3).
src is an array. Remove these tests for NULL pointers.
While I'm here, eliminate a strlcpy with a correct but suspicious-looking
calculation for the third parameter (i.e. not a simple sizeof).
Compare the strings in-place instead of copying.

Found by:	bdrewery
Found by:	Coverity
CID:		1130050, 1130056
MFC after:	3 days
Sponsored by:	Dell Inc.
Differential Revision:	 https://reviews.freebsd.org/D6338
2016-05-14 00:35:35 +00:00
mm
38e8840f40 MFV r299425:
Update libarchive to 3.2.0

New features:
- new bsdcat command-line utility
- LZ4 compression (in src only via external utility from ports)
- Warc format support
- 'Raw' format writer
- Zip: Support archives >4GB, entries >4GB
- Zip: Support encrypting and decrypting entries
- Zip: Support experimental streaming extension
- Identify encrypted entries in several formats
- New --clear-nochange-flags option to bsdtar tries to remove noschg and
  similar flags before deleting files
- New --ignore-zeros option to bsdtar to handle concatenated tar archives
- Use multi-threaded LZMA decompression if liblzma supports it
- Expose version info for libraries used by libarchive

Patched files (fixed compiler warnings):

contrib/libarchive/cat/bsdcat.c (vendor PR #702)
contrib/libarchive/cat/bsdcat.h (vendor PR #702)
contrib/libarchive/libarchive/archive_read_support_format_mtree.c (PR #701)
contrib/libarchive/libarchive_fe/err.c (vendor PR #703)

MFC after:	1 month
Relnotes:	yes
2016-05-12 10:16:16 +00:00
bcr
4773bac9ba Capitalize "LDAP" in the description field of the _ypldap entry.
Reviewed by:	bapt
MFC after:	5 days
Differential Revision:	https://reviews.freebsd.org/D5267
2016-05-10 12:47:36 +00:00
trasz
8e6e54de64 Refactor the root mount hold code and add the wait to etc/rc.d/fsck.
This fixes mounting (non-root) USB drives on boot with fsck enabled
(with non-zero 'Pass#' field in fstab(5)).

Reported by:	Graham Menhennitt <graham at menhennitt.com.au>
Reviewed by:	jilles@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6221
2016-05-10 08:44:44 +00:00
jilles
e735629894 install: Add some tests. 2016-05-08 21:11:24 +00:00
rmacklem
08fe1020ba Make "-S" a default option for mountd.
After a discussion on freebsd-fs@ there seemed to be a consensus that
the "-S" option for mountd should become the default.
Since the only known issue w.r.t. using "-S" was fixed by r299201,
this commit adds "-S" to the default mountd_flags.

Discussed on:	freebsd-fs
PR:		9619, 131342, 206855
MFC after:	2 weeks
Relnotes:	yes
2016-05-08 20:10:22 +00:00
ngie
74aed2e95e Only install etc/rc.d/{rfcomm_pppd_server,sdpd} if MK_BLUETOOTH != no
These are bluetooth specific services

MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
2016-05-06 09:18:09 +00:00
asomers
09b44517ca Improve performance and functionality of the bitstring(3) api
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.

Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.

All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.

sys/sys/bitstring.h:
        Convert the majority of the existing bit string implementation from
        macros to inline functions.

        Properly protect the implementation from inadvertant macro expansion
        when included in a user's program by prefixing all private
        macros/functions and local variables with '_'.

        Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
        bit_ffc() in terms of their "at" counterparts.

        Provide a kernel implementation of bit_alloc(), making the full API
        usable in the kernel.

        Improve code documenation.

share/man/man3/bitstring.3:
        Add pre-exisiting API bit_ffc() to the synopsis.

        Document new APIs.

        Document the initialization state of the bit strings
        allocated/declared by bit_alloc() and bit_decl().

        Correct documentation for bitstr_size(). The original code comments
        indicate the size is in bytes, not "elements of bitstr_t". The new
        implementation follows this lead. Only hastd assumed "elements"
        rather than bytes and it has been corrected.

etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
        Add tests for all existing and new functionality.

include/bitstring.h
	Include all headers needed by sys/bitstring.h

lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
        Include bitstring.h instead of sys/bitstring.h.

sbin/hastd/activemap.c:
        Correct usage of bitstr_size().

sys/dev/xen/blkback/blkback.c
        Use new bit_alloc.

sys/kern/subr_unit.c:
        Remove hard-coded assumption that sizeof(bitstr_t) is 1.  Get rid of
        unrb.busy, which caches the number of bits set in unrb.map.  When
        INVARIANTS are disabled, nothing needs to know that information.
        callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
        Eliminating unrb.busy saves memory, simplifies the code, and
        provides a slight speedup when INVARIANTS are disabled.

sys/net/flowtable.c:
        Use the new kernel implementation of bit-alloc, instead of hacking
        the old libc-dependent macro.

sys/sys/param.h
        Update __FreeBSD_version to indicate availability of new API

Submitted by:   gibbs, asomers
Reviewed by:    gibbs, ngie
MFC after:      4 weeks
Sponsored by:   Spectra Logic Corp
Differential Revision:  https://reviews.freebsd.org/D6004
2016-05-04 22:34:11 +00:00
jhb
c052df1347 Add a debug dir for /boot/modules.
This provides a place for standalone modules to store debug symbols.

Reviewed by:	emaste
Differential Revision:	https://reviews.freebsd.org/D6190
2016-05-03 18:26:07 +00:00
pfg
61832eff1b etc: minor spelling fixes.
Mostly comments but these tend to be user-visible.

MFC after:	2 weeks
2016-05-01 16:43:22 +00:00
peter
6d36b5c0d3 Fix incorrect permissions for /etc/rc.d/sendmail in fallout from
release-pkg merge.
2016-04-30 19:01:51 +00:00
ngie
adbdb09be1 Make SERVERS REQUIRE clean when MK_KERBEROS==no
Make kdc run BEFORE SERVERS instead of being REQUIREd by SERVERS,
so systems that pedantically check REQUIREs function after r270782

MFC after: 1 week
X-MFC with: r270782
Sponsored by: EMC / Isilon Storage Division
2016-04-30 09:50:08 +00:00
bapt
c5ca227cf4 Add sdiff test directory to the tests mtree 2016-04-30 06:37:32 +00:00
bapt
72855a7c5d Add a savecore_enable variable support for the savecore rc script
By default set to 'YES' so it does not change the current behaviour for users,
this variable allows to decide to not extract crach dumps from the dump
device at boot time by setting it to "NO" in rc.conf.

Sponsored by:	Gandi.net
2016-04-29 12:23:56 +00:00
hselasky
7ce4e4a1a7 Regenerate usb.conf .
MFC after:	1 week
2016-04-29 12:00:36 +00:00
lme
ec64617429 Fix duplicate "name" variable that sneaked in with the rc description commit.
Approved by:	jhibbits
2016-04-24 19:25:11 +00:00
se
14e320cfdf Fix typo (forgotten "=" after desc). 2016-04-24 12:07:44 +00:00
schweikh
90a5802cf1 Cosmetics: - no need to escape the newline after '|'
- parenthesize the "case" string for symmetry and improved
             search for matching paren (e.g. with vi's %)
2016-04-24 10:52:59 +00:00
jamie
f5682fb1b9 Don't remove the /var/run/jail_name.id file if a jail fails to start.
This messes up ezjail (and possibly others), when attempting to start
a jail that already exists.

PR:		208806
Reviewed by:	tj
MFC after:	5 days
2016-04-23 16:23:01 +00:00
lme
96447551d7 - Add two new subcommands to rc.subr:
"describe" shows an rc script's description
  "extracommands" shows an rc script's non-standard commands like "reload", "configtest", "keygen", etc
- Update the rc(8) manpage and the tcsh(1) completion examples to reflect these changes

Approved by:	bapt
Sponsored by:	Essen Linuxhotel Hackathon 2016
Differential Revision:	D452
2016-04-23 16:19:34 +00:00
lme
965a2e6f88 - Add descriptions to most of the rc scripts. Those are mostly taken from their
daemon's manpage and probably improved.
- Consistently use "filesystem" not "file system".

Approved by:	bapt, brueffer
Differential Revision:	D452
2016-04-23 16:10:54 +00:00