- reduce cpu usage by as much as 25% (40% -> 30) by doing txq reclaim more efficiently
- use mtx_trylock when trying to grab the lock to avoid spinning during long encap loop
- add per-txq reclaim task
- if mbufs were successfully re-claimed try another pass
- track txq overruns with sysctl
Approved by: re (blanket)
- Add controller id for Intel 82801I (ICH9).
PR: kern/114399
Submitted by: Michael Fuckner <michael@fuckner.net>
- MSI support. Disable by default due to various issues with too many
broken hardwares. MSI can be enabled through device.hints(5) or
kenv(8) by setting "hint.pcm.%d.msi=1".
Partially submitted by: kevlo
YAMAMOTO Taku <taku@tackymt.homeip.net>
Tested by: joel, kevlo, YAMAMOTO Taku
Approved by: re (hrs)
MFC after: 3 days
do the heavy lifting of the 'mii_tick' function, rue was left behind.
Implement this in a naive way. Reports from the field show this makes
the driver functional with some locking issues, as opposed to an
instant panic. Those will be addressed in a later version of the
driver.
Approved by: re@ (bmah)
Sort NETGEAR list per convention.
Swap QUALCOMM and QUALCOMM2.
Add a few vendor products.
no md5 changes with this file (except when USBVERBOSE is enabled)
Approved by: re@ (blanket)
- Handle directories and leaves other than unit directories and text leaves
correctly.
- Now we can retrieve CROM of iSight correctly.
Approved by: re (hrs)
Tested by: flz
MFC after: 3 days
in. These are exclusively in the name of the company for this round.
No new devices have been added, but the MITEL entry has been
eliminated because nothing uses it. You won't see any difference
unless you have USBVERBOSE defined for the kernel.
Approved by: re@ (blanket)
nxge: cast page size fragments down to (int). If the vm's demand paging
PAGE_SIZE is ever too big for that, we've got far bigger problems.
ofw: move va_start() a little earlier. gcc-4.2 doesn't like us modifying
the last arg before the va_start().
Approved by: re (rwatson)
would be 93C46(1Kbit) or 93C56(2Kbit). One of differences between them
is number of address lines required to access the EEPROM. For example,
93C56 EEPROM needs 8 address lines to read/write data. If 93C56
recevied premature end of required number of serial clock(CLK) to set
OP code/address of EEPROM, the result would be unexpected behavior.
Previously it tried to detect 93C46, which requires 6 address lines,
and then assumed it would be 93C56 if read data was not expected
value. However, this approach didn't work in some models/situations
as 93C56 requries 8 address lines to access its data. In order to fix
it, change EEPROM probing order such that 93C56 is detected reliably.
While I'm here change hard-coded address line numbers with defined
constant to enhance readability.
PR: 112710
Approved by: re (mux)
o Adonics Cable 205
o Aiptek PocketCAM 3Mega
o Belkin USB2SCSI
o Casio QV DigiCam
o CCYU EasyDisk ED1064
o Desknote UCR-61S2B
o Epson Stylus Photo 875DC Card Reader
o Epson Stylus Photo 895 Card Reader
o Feiya 5-in-1 Card Reader
o Hitachi Dvd-CAM DZ-MV100A Camcorder
o HP CD-WRiter+ CD-4e
o Insystem Storage Adapter v2
o Kyocera Finecam S3x
o Kyocera Finecam S4
o Kyocera Finecam S5
o Kyocera Finecam L3
o Lexar USB CF Reader
o MindAtWork Digital Wallet
o Minolta Dimage F300
o Minolta Dimage E223
o Minsumi USB Fdd
o Netac USB-CF-Card
o NetChip USB Clik! 40
o Onspec MDCFE-B USB CF Reader
o Onspec SIIG/Datafab Memory Stick + CF Reader/Writer
o Onspec Datafab-based Reader
o Onspec PNY/Datafab CF+SM Reader
o Onspec SimpleTech/Datafab CF+SM Reader
o Onspec MDSM-b Reader
o Onspec USB To CF + SM Combo (LC1)
o Onspec ImageMate SDDR55
o Panasonic LS-120 Camera
o Samsung Techwin Digimax 410
o Shuttle eUSB SmartMedia / CompactFlash Adapter
o Skanhex MD 7425 Camera
o Skanhex SX 520z Camera
o Sony Memorystick NW-MS7
o Sony Portable USB Hardrive V2
o Sony Memorystick PEG N760c
o Sony Memorystick MSC-U03
o TREK/IBM USB memory key
o Trumpion T33520 USB Flash Card Controller
o Trumpion MP3 Player
o Vivtar Vivicam 35Xx
o WinMaxGroup USB Flash Disk 64M-C
o Zoran Digital Camera EX-20 DSC
and maybe a few others...
Submitted by: Vaidas Damosevicius and flz
PR: 79893
Reviewed by: njl, flz
Approved by: re (blanket)
that should be a no-op (for example, requesting SYNC on record path).
The standards does not indicate that such requests are illegal, so
just return it as success instead of EINVAL.
Approved by: re (mux)
First, we were never correctly checking for a 24XX Status Type 0
response- that cased us to fall through to evaluate status for
commands as if this were a 2100/2200/2300 Status Type 0 response.
This is *close*, but not quite the same. This has been reported
to be apparent with some wierd lun configuration problems with
some arrays. It became glaringly apparent on sparc64 where none
of the correct byte swap things were done.
Fixing this omission then caused a whole universe shifting debug
cycle of endian issues for the 2400. The manual for 24XX f/w turns
out to be wrong about the endianness of a couple of entities. The
lun and cdb fields for the type 7 request are *not* unconditionally
big endian- they happen to be opposite of whatever the endian of
the current machine type is. Same with the sense data for the
24XX type 0 response.
While we're at it investigate and resolve some NVRAM endian
issues.
Approved by: re (ken)
MFC after: 3 days
Submitted by: Simon Schubert <corecode@fs.ei.tum.de>
- Defer flushing unsolicited response into taskqueue thread rather
than handle it directly in interrupt handler, since few of its
operations (like measuring/calibrating jack impedance) are quite
expensive.
- Misc. debugging cleanups.
Tested by: joel
Approved by: re (hrs)
MFC after: 3 days
Note: The offending quirk should have been made model/codec specific,
but since there were no records / log which model requires it, the quirk
logic had to be inverted (blacklist instead of whitelist).
Tested by: Arkadiy Dudevitch <dudevitch@englerllc.com>
Approved by: re (hrs)
MFC after: 3 days
- provide dummy routines for ic_scan_curchan and ic_scan_mindwell, we do not support those operations.
- add ieee80211_scan_done() to tell the scanning module that all channels have been scanned.
- pass IEEE80211_S_SCAN state off to net80211 so it can initiate scanning
- fix overflow in the rates array
- scale the rate value passed back from the firmware scan to the units that net80211 uses.
Submitted by: Token
Reviewed by: sam, avatar
Approved by: re (kensmith)
operating channel and use this in the scan cache rather than directly using
ic_curchan. Some firmware cards can only do a full scan and so ic_curchan does
not have the correct value.
Also add IEEE80211_CHAN2IEEE to directly dereference ic_ieee from the channel
to be used in the fast path.
Reviewed by: sam, sephe
Approved by: re (kensmith)
to be index by IEEE channel number but that is no longer the case and it needs
to be searched for.
Submitted by: avatar
Reviewed by: sam
Approved by: re (kensmith)
(1) Add size parameter to usbd_get_string()
(2) Properly limit speed when a full speed hub is plugged into a high
speed hub.
Submitted by: Hans Petter Selasky
PR: 80773, 79725
Approved by: re@ (kensmith)
yet supported by this driver. Support will be committed soon, or a
filter on all the 'newer' devices will be installed before the
release.
Approved by: re@ (blanket)
Obtained from: NetBSD, OpenBSD
Small Furry Animals by: Pink Floyd
switch (i.e. lid) is set to have an action of NONE. This is not an
invalid state, so silently return. This fixes the warning:
"acpi: request to enter state S6 failed (err 22)"
Approved by: re
the command. Make UFI devices return 'success' when asked to do a
SYNC_CACHE. There's no support for write caching in the UFI spec, so
this is the most appropriate action to undertake.
Reviewed by: scottl
Approved by: re@ (blanket)
Hellmuth with some refinements by myself and flz@. It works for me
with my non-MS mice, so nothing should be broken by it.
Submitted by: Hellmuth Michaelis
PR: 90162
Approved by: re (blanket)
pr, the submitter says:
Found this while running freebsd as guest in qemu with -usb
parameter. The patch implements the missing dynamic size based on
number of ports a hub has.
Submitted by: Lonnie Mendez
PR: 94946
Approved by: re@ (blanket)
