/*- * Copyright (c) 2000 Matthew Jacob * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include MALLOC_DEFINE(M_SCSISES, "SCSI SES", "SCSI SES buffers"); /* * Platform Independent Driver Internal Definitions for SES devices. */ typedef enum { SES_NONE, SES_SES_SCSI2, SES_SES, SES_SES_PASSTHROUGH, SES_SEN, SES_SAFT } enctyp; struct ses_softc; typedef struct ses_softc ses_softc_t; typedef struct { int (*softc_init)(ses_softc_t *, int); int (*init_enc)(ses_softc_t *); int (*get_encstat)(ses_softc_t *, int); int (*set_encstat)(ses_softc_t *, ses_encstat, int); int (*get_objstat)(ses_softc_t *, ses_objstat *, int); int (*set_objstat)(ses_softc_t *, ses_objstat *, int); } encvec; #define ENCI_SVALID 0x80 typedef struct { uint32_t enctype : 8, /* enclosure type */ subenclosure : 8, /* subenclosure id */ svalid : 1, /* enclosure information valid */ priv : 15; /* private data, per object */ uint8_t encstat[4]; /* state && stats */ } encobj; #define SEN_ID "UNISYS SUN_SEN" #define SEN_ID_LEN 24 static enctyp ses_type(void *, int); /* Forward reference to Enclosure Functions */ static int ses_softc_init(ses_softc_t *, int); static int ses_init_enc(ses_softc_t *); static int ses_get_encstat(ses_softc_t *, int); static int ses_set_encstat(ses_softc_t *, uint8_t, int); static int ses_get_objstat(ses_softc_t *, ses_objstat *, int); static int ses_set_objstat(ses_softc_t *, ses_objstat *, int); static int safte_softc_init(ses_softc_t *, int); static int safte_init_enc(ses_softc_t *); static int safte_get_encstat(ses_softc_t *, int); static int safte_set_encstat(ses_softc_t *, uint8_t, int); static int safte_get_objstat(ses_softc_t *, ses_objstat *, int); static int safte_set_objstat(ses_softc_t *, ses_objstat *, int); /* * Platform implementation defines/functions for SES internal kernel stuff */ #define STRNCMP strncmp #define PRINTF printf #define SES_LOG ses_log #ifdef DEBUG #define SES_DLOG ses_log #else #define SES_DLOG if (0) ses_log #endif #define SES_VLOG if (bootverbose) ses_log #define SES_MALLOC(amt) malloc(amt, M_SCSISES, M_NOWAIT) #define SES_FREE(ptr, amt) free(ptr, M_SCSISES) #define MEMZERO bzero #define MEMCPY(dest, src, amt) bcopy(src, dest, amt) static int ses_runcmd(struct ses_softc *, char *, int, char *, int *); static void ses_log(struct ses_softc *, const char *, ...); /* * Gerenal FreeBSD kernel stuff. */ #define ccb_state ppriv_field0 #define ccb_bp ppriv_ptr1 struct ses_softc { enctyp ses_type; /* type of enclosure */ encvec ses_vec; /* vector to handlers */ void * ses_private; /* per-type private data */ encobj * ses_objmap; /* objects */ uint32_t ses_nobjects; /* number of objects */ ses_encstat ses_encstat; /* overall status */ uint8_t ses_flags; union ccb ses_saved_ccb; struct cdev *ses_dev; struct cam_periph *periph; }; #define SES_FLAG_INVALID 0x01 #define SES_FLAG_OPEN 0x02 #define SES_FLAG_INITIALIZED 0x04 #define SESUNIT(x) (minor((x))) static d_open_t sesopen; static d_close_t sesclose; static d_ioctl_t sesioctl; static periph_init_t sesinit; static periph_ctor_t sesregister; static periph_oninv_t sesoninvalidate; static periph_dtor_t sescleanup; static periph_start_t sesstart; static void sesasync(void *, uint32_t, struct cam_path *, void *); static void sesdone(struct cam_periph *, union ccb *); static int seserror(union ccb *, uint32_t, uint32_t); static struct periph_driver sesdriver = { sesinit, "ses", TAILQ_HEAD_INITIALIZER(sesdriver.units), /* generation */ 0 }; PERIPHDRIVER_DECLARE(ses, sesdriver); static struct cdevsw ses_cdevsw = { .d_version = D_VERSION, .d_open = sesopen, .d_close = sesclose, .d_ioctl = sesioctl, .d_name = "ses", .d_flags = 0, }; static void sesinit(void) { cam_status status; /* * Install a global async callback. This callback will * receive async callbacks like "new device found". */ status = xpt_register_async(AC_FOUND_DEVICE, sesasync, NULL, NULL); if (status != CAM_REQ_CMP) { printf("ses: Failed to attach master async callback " "due to status 0x%x!\n", status); } } static void sesoninvalidate(struct cam_periph *periph) { struct ses_softc *softc; softc = (struct ses_softc *)periph->softc; /* * Unregister any async callbacks. */ xpt_register_async(0, sesasync, periph, periph->path); softc->ses_flags |= SES_FLAG_INVALID; xpt_print(periph->path, "lost device\n"); } static void sescleanup(struct cam_periph *periph) { struct ses_softc *softc; softc = (struct ses_softc *)periph->softc; destroy_dev(softc->ses_dev); xpt_print(periph->path, "removing device entry\n"); free(softc, M_SCSISES); } static void sesasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg) { struct cam_periph *periph; periph = (struct cam_periph *)callback_arg; switch(code) { case AC_FOUND_DEVICE: { cam_status status; struct ccb_getdev *cgd; int inq_len; cgd = (struct ccb_getdev *)arg; if (arg == NULL) { break; } inq_len = cgd->inq_data.additional_length + 4; /* * PROBLEM: WE NEED TO LOOK AT BYTES 48-53 TO SEE IF THIS IS * PROBLEM: IS A SAF-TE DEVICE. */ switch (ses_type(&cgd->inq_data, inq_len)) { case SES_SES: case SES_SES_SCSI2: case SES_SES_PASSTHROUGH: case SES_SEN: case SES_SAFT: break; default: return; } status = cam_periph_alloc(sesregister, sesoninvalidate, sescleanup, sesstart, "ses", CAM_PERIPH_BIO, cgd->ccb_h.path, sesasync, AC_FOUND_DEVICE, cgd); if (status != CAM_REQ_CMP && status != CAM_REQ_INPROG) { printf("sesasync: Unable to probe new device due to " "status 0x%x\n", status); } break; } default: cam_periph_async(periph, code, path, arg); break; } } static cam_status sesregister(struct cam_periph *periph, void *arg) { struct ses_softc *softc; struct ccb_getdev *cgd; char *tname; cgd = (struct ccb_getdev *)arg; if (periph == NULL) { printf("sesregister: periph was NULL!!\n"); return (CAM_REQ_CMP_ERR); } if (cgd == NULL) { printf("sesregister: no getdev CCB, can't register device\n"); return (CAM_REQ_CMP_ERR); } softc = SES_MALLOC(sizeof (struct ses_softc)); if (softc == NULL) { printf("sesregister: Unable to probe new device. " "Unable to allocate softc\n"); return (CAM_REQ_CMP_ERR); } bzero(softc, sizeof (struct ses_softc)); periph->softc = softc; softc->periph = periph; softc->ses_type = ses_type(&cgd->inq_data, sizeof (cgd->inq_data)); switch (softc->ses_type) { case SES_SES: case SES_SES_SCSI2: case SES_SES_PASSTHROUGH: softc->ses_vec.softc_init = ses_softc_init; softc->ses_vec.init_enc = ses_init_enc; softc->ses_vec.get_encstat = ses_get_encstat; softc->ses_vec.set_encstat = ses_set_encstat; softc->ses_vec.get_objstat = ses_get_objstat; softc->ses_vec.set_objstat = ses_set_objstat; break; case SES_SAFT: softc->ses_vec.softc_init = safte_softc_init; softc->ses_vec.init_enc = safte_init_enc; softc->ses_vec.get_encstat = safte_get_encstat; softc->ses_vec.set_encstat = safte_set_encstat; softc->ses_vec.get_objstat = safte_get_objstat; softc->ses_vec.set_objstat = safte_set_objstat; break; case SES_SEN: break; case SES_NONE: default: free(softc, M_SCSISES); return (CAM_REQ_CMP_ERR); } cam_periph_unlock(periph); softc->ses_dev = make_dev(&ses_cdevsw, unit2minor(periph->unit_number), UID_ROOT, GID_OPERATOR, 0600, "%s%d", periph->periph_name, periph->unit_number); cam_periph_lock(periph); softc->ses_dev->si_drv1 = periph; /* * Add an async callback so that we get * notified if this device goes away. */ xpt_register_async(AC_LOST_DEVICE, sesasync, periph, periph->path); switch (softc->ses_type) { default: case SES_NONE: tname = "No SES device"; break; case SES_SES_SCSI2: tname = "SCSI-2 SES Device"; break; case SES_SES: tname = "SCSI-3 SES Device"; break; case SES_SES_PASSTHROUGH: tname = "SES Passthrough Device"; break; case SES_SEN: tname = "UNISYS SEN Device (NOT HANDLED YET)"; break; case SES_SAFT: tname = "SAF-TE Compliant Device"; break; } xpt_announce_periph(periph, tname); return (CAM_REQ_CMP); } static int sesopen(struct cdev *dev, int flags, int fmt, struct thread *td) { struct cam_periph *periph; struct ses_softc *softc; int error = 0; periph = (struct cam_periph *)dev->si_drv1; if (periph == NULL) { return (ENXIO); } if (cam_periph_acquire(periph) != CAM_REQ_CMP) { cam_periph_unlock(periph); return (ENXIO); } cam_periph_lock(periph); softc = (struct ses_softc *)periph->softc; if (softc->ses_flags & SES_FLAG_INVALID) { error = ENXIO; goto out; } if (softc->ses_flags & SES_FLAG_OPEN) { error = EBUSY; goto out; } if (softc->ses_vec.softc_init == NULL) { error = ENXIO; goto out; } softc->ses_flags |= SES_FLAG_OPEN; if ((softc->ses_flags & SES_FLAG_INITIALIZED) == 0) { error = (*softc->ses_vec.softc_init)(softc, 1); if (error) softc->ses_flags &= ~SES_FLAG_OPEN; else softc->ses_flags |= SES_FLAG_INITIALIZED; } out: cam_periph_unlock(periph); if (error) { cam_periph_release(periph); } return (error); } static int sesclose(struct cdev *dev, int flag, int fmt, struct thread *td) { struct cam_periph *periph; struct ses_softc *softc; int error; error = 0; periph = (struct cam_periph *)dev->si_drv1; if (periph == NULL) return (ENXIO); cam_periph_lock(periph); softc = (struct ses_softc *)periph->softc; softc->ses_flags &= ~SES_FLAG_OPEN; cam_periph_unlock(periph); cam_periph_release(periph); return (0); } static void sesstart(struct cam_periph *p, union ccb *sccb) { if (p->immediate_priority <= p->pinfo.priority) { SLIST_INSERT_HEAD(&p->ccb_list, &sccb->ccb_h, periph_links.sle); p->immediate_priority = CAM_PRIORITY_NONE; wakeup(&p->ccb_list); } } static void sesdone(struct cam_periph *periph, union ccb *dccb) { wakeup(&dccb->ccb_h.cbfcnp); } static int seserror(union ccb *ccb, uint32_t cflags, uint32_t sflags) { struct ses_softc *softc; struct cam_periph *periph; periph = xpt_path_periph(ccb->ccb_h.path); softc = (struct ses_softc *)periph->softc; return (cam_periph_error(ccb, cflags, sflags, &softc->ses_saved_ccb)); } static int sesioctl(struct cdev *dev, u_long cmd, caddr_t arg_addr, int flag, struct thread *td) { struct cam_periph *periph; ses_encstat tmp; ses_objstat objs; ses_object *uobj; struct ses_softc *ssc; void *addr; int error, i; if (arg_addr) addr = *((caddr_t *) arg_addr); else addr = NULL; periph = (struct cam_periph *)dev->si_drv1; if (periph == NULL) return (ENXIO); CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering sesioctl\n")); cam_periph_lock(periph); ssc = (struct ses_softc *)periph->softc; /* * Now check to see whether we're initialized or not. * This actually should never fail as we're not supposed * to get past ses_open w/o successfully initializing * things. */ if ((ssc->ses_flags & SES_FLAG_INITIALIZED) == 0) { cam_periph_unlock(periph); return (ENXIO); } cam_periph_unlock(periph); error = 0; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("trying to do ioctl %#lx\n", cmd)); /* * If this command can change the device's state, * we must have the device open for writing. * * For commands that get information about the * device- we don't need to lock the peripheral * if we aren't running a command. The number * of objects and the contents will stay stable * after the first open that does initialization. * The periph also can't go away while a user * process has it open. */ switch (cmd) { case SESIOC_GETNOBJ: case SESIOC_GETOBJMAP: case SESIOC_GETENCSTAT: case SESIOC_GETOBJSTAT: break; default: if ((flag & FWRITE) == 0) { return (EBADF); } } switch (cmd) { case SESIOC_GETNOBJ: error = copyout(&ssc->ses_nobjects, addr, sizeof (ssc->ses_nobjects)); break; case SESIOC_GETOBJMAP: for (uobj = addr, i = 0; i != ssc->ses_nobjects; i++) { ses_object kobj; kobj.obj_id = i; kobj.subencid = ssc->ses_objmap[i].subenclosure; kobj.object_type = ssc->ses_objmap[i].enctype; error = copyout(&kobj, &uobj[i], sizeof (ses_object)); if (error) { break; } } break; case SESIOC_GETENCSTAT: cam_periph_lock(periph); error = (*ssc->ses_vec.get_encstat)(ssc, 1); if (error) { cam_periph_unlock(periph); break; } tmp = ssc->ses_encstat & ~ENCI_SVALID; cam_periph_unlock(periph); error = copyout(&tmp, addr, sizeof (ses_encstat)); ssc->ses_encstat = tmp; break; case SESIOC_SETENCSTAT: error = copyin(addr, &tmp, sizeof (ses_encstat)); if (error) break; cam_periph_lock(periph); error = (*ssc->ses_vec.set_encstat)(ssc, tmp, 1); cam_periph_unlock(periph); break; case SESIOC_GETOBJSTAT: error = copyin(addr, &objs, sizeof (ses_objstat)); if (error) break; if (objs.obj_id >= ssc->ses_nobjects) { error = EINVAL; break; } cam_periph_lock(periph); error = (*ssc->ses_vec.get_objstat)(ssc, &objs, 1); cam_periph_unlock(periph); if (error) break; error = copyout(&objs, addr, sizeof (ses_objstat)); /* * Always (for now) invalidate entry. */ ssc->ses_objmap[objs.obj_id].svalid = 0; break; case SESIOC_SETOBJSTAT: error = copyin(addr, &objs, sizeof (ses_objstat)); if (error) break; if (objs.obj_id >= ssc->ses_nobjects) { error = EINVAL; break; } cam_periph_lock(periph); error = (*ssc->ses_vec.set_objstat)(ssc, &objs, 1); cam_periph_unlock(periph); /* * Always (for now) invalidate entry. */ ssc->ses_objmap[objs.obj_id].svalid = 0; break; case SESIOC_INIT: cam_periph_lock(periph); error = (*ssc->ses_vec.init_enc)(ssc); cam_periph_unlock(periph); break; default: cam_periph_lock(periph); error = cam_periph_ioctl(periph, cmd, arg_addr, seserror); cam_periph_unlock(periph); break; } return (error); } #define SES_CFLAGS CAM_RETRY_SELTO #define SES_FLAGS SF_NO_PRINT | SF_RETRY_UA static int ses_runcmd(struct ses_softc *ssc, char *cdb, int cdbl, char *dptr, int *dlenp) { int error, dlen; ccb_flags ddf; union ccb *ccb; if (dptr) { if ((dlen = *dlenp) < 0) { dlen = -dlen; ddf = CAM_DIR_OUT; } else { ddf = CAM_DIR_IN; } } else { dlen = 0; ddf = CAM_DIR_NONE; } if (cdbl > IOCDBLEN) { cdbl = IOCDBLEN; } ccb = cam_periph_getccb(ssc->periph, 1); cam_fill_csio(&ccb->csio, 0, sesdone, ddf, MSG_SIMPLE_Q_TAG, dptr, dlen, sizeof (struct scsi_sense_data), cdbl, 60 * 1000); bcopy(cdb, ccb->csio.cdb_io.cdb_bytes, cdbl); error = cam_periph_runccb(ccb, seserror, SES_CFLAGS, SES_FLAGS, NULL); if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(ccb->ccb_h.path, 0, 0, 0, FALSE); if (error) { if (dptr) { *dlenp = dlen; } } else { if (dptr) { *dlenp = ccb->csio.resid; } } xpt_release_ccb(ccb); return (error); } static void ses_log(struct ses_softc *ssc, const char *fmt, ...) { va_list ap; printf("%s%d: ", ssc->periph->periph_name, ssc->periph->unit_number); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); } /* * The code after this point runs on many platforms, * so forgive the slightly awkward and nonconforming * appearance. */ /* * Is this a device that supports enclosure services? * * It's a a pretty simple ruleset- if it is device type 0x0D (13), it's * an SES device. If it happens to be an old UNISYS SEN device, we can * handle that too. */ #define SAFTE_START 44 #define SAFTE_END 50 #define SAFTE_LEN SAFTE_END-SAFTE_START static enctyp ses_type(void *buf, int buflen) { unsigned char *iqd = buf; if (buflen < 8+SEN_ID_LEN) return (SES_NONE); if ((iqd[0] & 0x1f) == T_ENCLOSURE) { if (STRNCMP(&iqd[8], SEN_ID, SEN_ID_LEN) == 0) { return (SES_SEN); } else if ((iqd[2] & 0x7) > 2) { return (SES_SES); } else { return (SES_SES_SCSI2); } return (SES_NONE); } #ifdef SES_ENABLE_PASSTHROUGH if ((iqd[6] & 0x40) && (iqd[2] & 0x7) >= 2) { /* * PassThrough Device. */ return (SES_SES_PASSTHROUGH); } #endif /* * The comparison is short for a reason- * some vendors were chopping it short. */ if (buflen < SAFTE_END - 2) { return (SES_NONE); } if (STRNCMP((char *)&iqd[SAFTE_START], "SAF-TE", SAFTE_LEN - 2) == 0) { return (SES_SAFT); } return (SES_NONE); } /* * SES Native Type Device Support */ /* * SES Diagnostic Page Codes */ typedef enum { SesConfigPage = 0x1, SesControlPage, #define SesStatusPage SesControlPage SesHelpTxt, SesStringOut, #define SesStringIn SesStringOut SesThresholdOut, #define SesThresholdIn SesThresholdOut SesArrayControl, #define SesArrayStatus SesArrayControl SesElementDescriptor, SesShortStatus } SesDiagPageCodes; /* * minimal amounts */ /* * Minimum amount of data, starting from byte 0, to have * the config header. */ #define SES_CFGHDR_MINLEN 12 /* * Minimum amount of data, starting from byte 0, to have * the config header and one enclosure header. */ #define SES_ENCHDR_MINLEN 48 /* * Take this value, subtract it from VEnclen and you know * the length of the vendor unique bytes. */ #define SES_ENCHDR_VMIN 36 /* * SES Data Structures */ typedef struct { uint32_t GenCode; /* Generation Code */ uint8_t Nsubenc; /* Number of Subenclosures */ } SesCfgHdr; typedef struct { uint8_t Subencid; /* SubEnclosure Identifier */ uint8_t Ntypes; /* # of supported types */ uint8_t VEnclen; /* Enclosure Descriptor Length */ } SesEncHdr; typedef struct { uint8_t encWWN[8]; /* XXX- Not Right Yet */ uint8_t encVid[8]; uint8_t encPid[16]; uint8_t encRev[4]; uint8_t encVen[1]; } SesEncDesc; typedef struct { uint8_t enc_type; /* type of element */ uint8_t enc_maxelt; /* maximum supported */ uint8_t enc_subenc; /* in SubEnc # N */ uint8_t enc_tlen; /* Type Descriptor Text Length */ } SesThdr; typedef struct { uint8_t comstatus; uint8_t comstat[3]; } SesComStat; struct typidx { int ses_tidx; int ses_oidx; }; struct sscfg { uint8_t ses_ntypes; /* total number of types supported */ /* * We need to keep a type index as well as an * object index for each object in an enclosure. */ struct typidx *ses_typidx; /* * We also need to keep track of the number of elements * per type of element. This is needed later so that we * can find precisely in the returned status data the * status for the Nth element of the Kth type. */ uint8_t * ses_eltmap; }; /* * (de)canonicalization defines */ #define sbyte(x, byte) ((((uint32_t)(x)) >> (byte * 8)) & 0xff) #define sbit(x, bit) (((uint32_t)(x)) << bit) #define sset8(outp, idx, sval) (((uint8_t *)(outp))[idx++]) = sbyte(sval, 0) #define sset16(outp, idx, sval) \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 1), \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 0) #define sset24(outp, idx, sval) \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 2), \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 1), \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 0) #define sset32(outp, idx, sval) \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 3), \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 2), \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 1), \ (((uint8_t *)(outp))[idx++]) = sbyte(sval, 0) #define gbyte(x, byte) ((((uint32_t)(x)) & 0xff) << (byte * 8)) #define gbit(lv, in, idx, shft, mask) lv = ((in[idx] >> shft) & mask) #define sget8(inp, idx, lval) lval = (((uint8_t *)(inp))[idx++]) #define gget8(inp, idx, lval) lval = (((uint8_t *)(inp))[idx]) #define sget16(inp, idx, lval) \ lval = gbyte((((uint8_t *)(inp))[idx]), 1) | \ (((uint8_t *)(inp))[idx+1]), idx += 2 #define gget16(inp, idx, lval) \ lval = gbyte((((uint8_t *)(inp))[idx]), 1) | \ (((uint8_t *)(inp))[idx+1]) #define sget24(inp, idx, lval) \ lval = gbyte((((uint8_t *)(inp))[idx]), 2) | \ gbyte((((uint8_t *)(inp))[idx+1]), 1) | \ (((uint8_t *)(inp))[idx+2]), idx += 3 #define gget24(inp, idx, lval) \ lval = gbyte((((uint8_t *)(inp))[idx]), 2) | \ gbyte((((uint8_t *)(inp))[idx+1]), 1) | \ (((uint8_t *)(inp))[idx+2]) #define sget32(inp, idx, lval) \ lval = gbyte((((uint8_t *)(inp))[idx]), 3) | \ gbyte((((uint8_t *)(inp))[idx+1]), 2) | \ gbyte((((uint8_t *)(inp))[idx+2]), 1) | \ (((uint8_t *)(inp))[idx+3]), idx += 4 #define gget32(inp, idx, lval) \ lval = gbyte((((uint8_t *)(inp))[idx]), 3) | \ gbyte((((uint8_t *)(inp))[idx+1]), 2) | \ gbyte((((uint8_t *)(inp))[idx+2]), 1) | \ (((uint8_t *)(inp))[idx+3]) #define SCSZ 0x2000 #define CFLEN (256 + SES_ENCHDR_MINLEN) /* * Routines specific && private to SES only */ static int ses_getconfig(ses_softc_t *); static int ses_getputstat(ses_softc_t *, int, SesComStat *, int, int); static int ses_cfghdr(uint8_t *, int, SesCfgHdr *); static int ses_enchdr(uint8_t *, int, uint8_t, SesEncHdr *); static int ses_encdesc(uint8_t *, int, uint8_t, SesEncDesc *); static int ses_getthdr(uint8_t *, int, int, SesThdr *); static int ses_decode(char *, int, uint8_t *, int, int, SesComStat *); static int ses_encode(char *, int, uint8_t *, int, int, SesComStat *); static int ses_softc_init(ses_softc_t *ssc, int doinit) { if (doinit == 0) { struct sscfg *cc; if (ssc->ses_nobjects) { SES_FREE(ssc->ses_objmap, ssc->ses_nobjects * sizeof (encobj)); ssc->ses_objmap = NULL; } if ((cc = ssc->ses_private) != NULL) { if (cc->ses_eltmap && cc->ses_ntypes) { SES_FREE(cc->ses_eltmap, cc->ses_ntypes); cc->ses_eltmap = NULL; cc->ses_ntypes = 0; } if (cc->ses_typidx && ssc->ses_nobjects) { SES_FREE(cc->ses_typidx, ssc->ses_nobjects * sizeof (struct typidx)); cc->ses_typidx = NULL; } SES_FREE(cc, sizeof (struct sscfg)); ssc->ses_private = NULL; } ssc->ses_nobjects = 0; return (0); } if (ssc->ses_private == NULL) { ssc->ses_private = SES_MALLOC(sizeof (struct sscfg)); } if (ssc->ses_private == NULL) { return (ENOMEM); } ssc->ses_nobjects = 0; ssc->ses_encstat = 0; return (ses_getconfig(ssc)); } static int ses_init_enc(ses_softc_t *ssc) { return (0); } static int ses_get_encstat(ses_softc_t *ssc, int slpflag) { SesComStat ComStat; int status; if ((status = ses_getputstat(ssc, -1, &ComStat, slpflag, 1)) != 0) { return (status); } ssc->ses_encstat = ComStat.comstatus | ENCI_SVALID; return (0); } static int ses_set_encstat(ses_softc_t *ssc, uint8_t encstat, int slpflag) { SesComStat ComStat; int status; ComStat.comstatus = encstat & 0xf; if ((status = ses_getputstat(ssc, -1, &ComStat, slpflag, 0)) != 0) { return (status); } ssc->ses_encstat = encstat & 0xf; /* note no SVALID set */ return (0); } static int ses_get_objstat(ses_softc_t *ssc, ses_objstat *obp, int slpflag) { int i = (int)obp->obj_id; if (ssc->ses_objmap[i].svalid == 0) { SesComStat ComStat; int err = ses_getputstat(ssc, i, &ComStat, slpflag, 1); if (err) return (err); ssc->ses_objmap[i].encstat[0] = ComStat.comstatus; ssc->ses_objmap[i].encstat[1] = ComStat.comstat[0]; ssc->ses_objmap[i].encstat[2] = ComStat.comstat[1]; ssc->ses_objmap[i].encstat[3] = ComStat.comstat[2]; ssc->ses_objmap[i].svalid = 1; } obp->cstat[0] = ssc->ses_objmap[i].encstat[0]; obp->cstat[1] = ssc->ses_objmap[i].encstat[1]; obp->cstat[2] = ssc->ses_objmap[i].encstat[2]; obp->cstat[3] = ssc->ses_objmap[i].encstat[3]; return (0); } static int ses_set_objstat(ses_softc_t *ssc, ses_objstat *obp, int slpflag) { SesComStat ComStat; int err; /* * If this is clear, we don't do diddly. */ if ((obp->cstat[0] & SESCTL_CSEL) == 0) { return (0); } ComStat.comstatus = obp->cstat[0]; ComStat.comstat[0] = obp->cstat[1]; ComStat.comstat[1] = obp->cstat[2]; ComStat.comstat[2] = obp->cstat[3]; err = ses_getputstat(ssc, (int)obp->obj_id, &ComStat, slpflag, 0); ssc->ses_objmap[(int)obp->obj_id].svalid = 0; return (err); } static int ses_getconfig(ses_softc_t *ssc) { struct sscfg *cc; SesCfgHdr cf; SesEncHdr hd; SesEncDesc *cdp; SesThdr thdr; int err, amt, i, nobj, ntype, maxima; char storage[CFLEN], *sdata; static char cdb[6] = { RECEIVE_DIAGNOSTIC, 0x1, SesConfigPage, SCSZ >> 8, SCSZ & 0xff, 0 }; cc = ssc->ses_private; if (cc == NULL) { return (ENXIO); } sdata = SES_MALLOC(SCSZ); if (sdata == NULL) return (ENOMEM); amt = SCSZ; err = ses_runcmd(ssc, cdb, 6, sdata, &amt); if (err) { SES_FREE(sdata, SCSZ); return (err); } amt = SCSZ - amt; if (ses_cfghdr((uint8_t *) sdata, amt, &cf)) { SES_LOG(ssc, "Unable to parse SES Config Header\n"); SES_FREE(sdata, SCSZ); return (EIO); } if (amt < SES_ENCHDR_MINLEN) { SES_LOG(ssc, "runt enclosure length (%d)\n", amt); SES_FREE(sdata, SCSZ); return (EIO); } SES_VLOG(ssc, "GenCode %x %d Subenclosures\n", cf.GenCode, cf.Nsubenc); /* * Now waltz through all the subenclosures toting up the * number of types available in each. For this, we only * really need the enclosure header. However, we get the * enclosure descriptor for debug purposes, as well * as self-consistency checking purposes. */ maxima = cf.Nsubenc + 1; cdp = (SesEncDesc *) storage; for (ntype = i = 0; i < maxima; i++) { MEMZERO((caddr_t)cdp, sizeof (*cdp)); if (ses_enchdr((uint8_t *) sdata, amt, i, &hd)) { SES_LOG(ssc, "Cannot Extract Enclosure Header %d\n", i); SES_FREE(sdata, SCSZ); return (EIO); } SES_VLOG(ssc, " SubEnclosure ID %d, %d Types With this ID, En" "closure Length %d\n", hd.Subencid, hd.Ntypes, hd.VEnclen); if (ses_encdesc((uint8_t *)sdata, amt, i, cdp)) { SES_LOG(ssc, "Can't get Enclosure Descriptor %d\n", i); SES_FREE(sdata, SCSZ); return (EIO); } SES_VLOG(ssc, " WWN: %02x%02x%02x%02x%02x%02x%02x%02x\n", cdp->encWWN[0], cdp->encWWN[1], cdp->encWWN[2], cdp->encWWN[3], cdp->encWWN[4], cdp->encWWN[5], cdp->encWWN[6], cdp->encWWN[7]); ntype += hd.Ntypes; } /* * Now waltz through all the types that are available, getting * the type header so we can start adding up the number of * objects available. */ for (nobj = i = 0; i < ntype; i++) { if (ses_getthdr((uint8_t *)sdata, amt, i, &thdr)) { SES_LOG(ssc, "Can't get Enclosure Type Header %d\n", i); SES_FREE(sdata, SCSZ); return (EIO); } SES_LOG(ssc, " Type Desc[%d]: Type 0x%x, MaxElt %d, In Subenc " "%d, Text Length %d\n", i, thdr.enc_type, thdr.enc_maxelt, thdr.enc_subenc, thdr.enc_tlen); nobj += thdr.enc_maxelt; } /* * Now allocate the object array and type map. */ ssc->ses_objmap = SES_MALLOC(nobj * sizeof (encobj)); cc->ses_typidx = SES_MALLOC(nobj * sizeof (struct typidx)); cc->ses_eltmap = SES_MALLOC(ntype); if (ssc->ses_objmap == NULL || cc->ses_typidx == NULL || cc->ses_eltmap == NULL) { if (ssc->ses_objmap) { SES_FREE(ssc->ses_objmap, (nobj * sizeof (encobj))); ssc->ses_objmap = NULL; } if (cc->ses_typidx) { SES_FREE(cc->ses_typidx, (nobj * sizeof (struct typidx))); cc->ses_typidx = NULL; } if (cc->ses_eltmap) { SES_FREE(cc->ses_eltmap, ntype); cc->ses_eltmap = NULL; } SES_FREE(sdata, SCSZ); return (ENOMEM); } MEMZERO(ssc->ses_objmap, nobj * sizeof (encobj)); MEMZERO(cc->ses_typidx, nobj * sizeof (struct typidx)); MEMZERO(cc->ses_eltmap, ntype); cc->ses_ntypes = (uint8_t) ntype; ssc->ses_nobjects = nobj; /* * Now waltz through the # of types again to fill in the types * (and subenclosure ids) of the allocated objects. */ nobj = 0; for (i = 0; i < ntype; i++) { int j; if (ses_getthdr((uint8_t *)sdata, amt, i, &thdr)) { continue; } cc->ses_eltmap[i] = thdr.enc_maxelt; for (j = 0; j < thdr.enc_maxelt; j++) { cc->ses_typidx[nobj].ses_tidx = i; cc->ses_typidx[nobj].ses_oidx = j; ssc->ses_objmap[nobj].subenclosure = thdr.enc_subenc; ssc->ses_objmap[nobj++].enctype = thdr.enc_type; } } SES_FREE(sdata, SCSZ); return (0); } static int ses_getputstat(ses_softc_t *ssc, int objid, SesComStat *sp, int slp, int in) { struct sscfg *cc; int err, amt, bufsiz, tidx, oidx; char cdb[6], *sdata; cc = ssc->ses_private; if (cc == NULL) { return (ENXIO); } /* * If we're just getting overall enclosure status, * we only need 2 bytes of data storage. * * If we're getting anything else, we know how much * storage we need by noting that starting at offset * 8 in returned data, all object status bytes are 4 * bytes long, and are stored in chunks of types(M) * and nth+1 instances of type M. */ if (objid == -1) { bufsiz = 2; } else { bufsiz = (ssc->ses_nobjects * 4) + (cc->ses_ntypes * 4) + 8; } sdata = SES_MALLOC(bufsiz); if (sdata == NULL) return (ENOMEM); cdb[0] = RECEIVE_DIAGNOSTIC; cdb[1] = 1; cdb[2] = SesStatusPage; cdb[3] = bufsiz >> 8; cdb[4] = bufsiz & 0xff; cdb[5] = 0; amt = bufsiz; err = ses_runcmd(ssc, cdb, 6, sdata, &amt); if (err) { SES_FREE(sdata, bufsiz); return (err); } amt = bufsiz - amt; if (objid == -1) { tidx = -1; oidx = -1; } else { tidx = cc->ses_typidx[objid].ses_tidx; oidx = cc->ses_typidx[objid].ses_oidx; } if (in) { if (ses_decode(sdata, amt, cc->ses_eltmap, tidx, oidx, sp)) { err = ENODEV; } } else { if (ses_encode(sdata, amt, cc->ses_eltmap, tidx, oidx, sp)) { err = ENODEV; } else { cdb[0] = SEND_DIAGNOSTIC; cdb[1] = 0x10; cdb[2] = 0; cdb[3] = bufsiz >> 8; cdb[4] = bufsiz & 0xff; cdb[5] = 0; amt = -bufsiz; err = ses_runcmd(ssc, cdb, 6, sdata, &amt); } } SES_FREE(sdata, bufsiz); return (0); } /* * Routines to parse returned SES data structures. * Architecture and compiler independent. */ static int ses_cfghdr(uint8_t *buffer, int buflen, SesCfgHdr *cfp) { if (buflen < SES_CFGHDR_MINLEN) { return (-1); } gget8(buffer, 1, cfp->Nsubenc); gget32(buffer, 4, cfp->GenCode); return (0); } static int ses_enchdr(uint8_t *buffer, int amt, uint8_t SubEncId, SesEncHdr *chp) { int s, off = 8; for (s = 0; s < SubEncId; s++) { if (off + 3 > amt) return (-1); off += buffer[off+3] + 4; } if (off + 3 > amt) { return (-1); } gget8(buffer, off+1, chp->Subencid); gget8(buffer, off+2, chp->Ntypes); gget8(buffer, off+3, chp->VEnclen); return (0); } static int ses_encdesc(uint8_t *buffer, int amt, uint8_t SubEncId, SesEncDesc *cdp) { int s, e, enclen, off = 8; for (s = 0; s < SubEncId; s++) { if (off + 3 > amt) return (-1); off += buffer[off+3] + 4; } if (off + 3 > amt) { return (-1); } gget8(buffer, off+3, enclen); off += 4; if (off >= amt) return (-1); e = off + enclen; if (e > amt) { e = amt; } MEMCPY(cdp, &buffer[off], e - off); return (0); } static int ses_getthdr(uint8_t *buffer, int amt, int nth, SesThdr *thp) { int s, off = 8; if (amt < SES_CFGHDR_MINLEN) { return (-1); } for (s = 0; s < buffer[1]; s++) { if (off + 3 > amt) return (-1); off += buffer[off+3] + 4; } if (off + 3 > amt) { return (-1); } off += buffer[off+3] + 4 + (nth * 4); if (amt < (off + 4)) return (-1); gget8(buffer, off++, thp->enc_type); gget8(buffer, off++, thp->enc_maxelt); gget8(buffer, off++, thp->enc_subenc); gget8(buffer, off, thp->enc_tlen); return (0); } /* * This function needs a little explanation. * * The arguments are: * * * char *b, int amt * * These describes the raw input SES status data and length. * * uint8_t *ep * * This is a map of the number of types for each element type * in the enclosure. * * int elt * * This is the element type being sought. If elt is -1, * then overall enclosure status is being sought. * * int elm * * This is the ordinal Mth element of type elt being sought. * * SesComStat *sp * * This is the output area to store the status for * the Mth element of type Elt. */ static int ses_decode(char *b, int amt, uint8_t *ep, int elt, int elm, SesComStat *sp) { int idx, i; /* * If it's overall enclosure status being sought, get that. * We need at least 2 bytes of status data to get that. */ if (elt == -1) { if (amt < 2) return (-1); gget8(b, 1, sp->comstatus); sp->comstat[0] = 0; sp->comstat[1] = 0; sp->comstat[2] = 0; return (0); } /* * Check to make sure that the Mth element is legal for type Elt. */ if (elm >= ep[elt]) return (-1); /* * Starting at offset 8, start skipping over the storage * for the element types we're not interested in. */ for (idx = 8, i = 0; i < elt; i++) { idx += ((ep[i] + 1) * 4); } /* * Skip over Overall status for this element type. */ idx += 4; /* * And skip to the index for the Mth element that we're going for. */ idx += (4 * elm); /* * Make sure we haven't overflowed the buffer. */ if (idx+4 > amt) return (-1); /* * Retrieve the status. */ gget8(b, idx++, sp->comstatus); gget8(b, idx++, sp->comstat[0]); gget8(b, idx++, sp->comstat[1]); gget8(b, idx++, sp->comstat[2]); #if 0 PRINTF("Get Elt 0x%x Elm 0x%x (idx %d)\n", elt, elm, idx-4); #endif return (0); } /* * This is the mirror function to ses_decode, but we set the 'select' * bit for the object which we're interested in. All other objects, * after a status fetch, should have that bit off. Hmm. It'd be easy * enough to ensure this, so we will. */ static int ses_encode(char *b, int amt, uint8_t *ep, int elt, int elm, SesComStat *sp) { int idx, i; /* * If it's overall enclosure status being sought, get that. * We need at least 2 bytes of status data to get that. */ if (elt == -1) { if (amt < 2) return (-1); i = 0; sset8(b, i, 0); sset8(b, i, sp->comstatus & 0xf); #if 0 PRINTF("set EncStat %x\n", sp->comstatus); #endif return (0); } /* * Check to make sure that the Mth element is legal for type Elt. */ if (elm >= ep[elt]) return (-1); /* * Starting at offset 8, start skipping over the storage * for the element types we're not interested in. */ for (idx = 8, i = 0; i < elt; i++) { idx += ((ep[i] + 1) * 4); } /* * Skip over Overall status for this element type. */ idx += 4; /* * And skip to the index for the Mth element that we're going for. */ idx += (4 * elm); /* * Make sure we haven't overflowed the buffer. */ if (idx+4 > amt) return (-1); /* * Set the status. */ sset8(b, idx, sp->comstatus); sset8(b, idx, sp->comstat[0]); sset8(b, idx, sp->comstat[1]); sset8(b, idx, sp->comstat[2]); idx -= 4; #if 0 PRINTF("Set Elt 0x%x Elm 0x%x (idx %d) with %x %x %x %x\n", elt, elm, idx, sp->comstatus, sp->comstat[0], sp->comstat[1], sp->comstat[2]); #endif /* * Now make sure all other 'Select' bits are off. */ for (i = 8; i < amt; i += 4) { if (i != idx) b[i] &= ~0x80; } /* * And make sure the INVOP bit is clear. */ b[2] &= ~0x10; return (0); } /* * SAF-TE Type Device Emulation */ static int safte_getconfig(ses_softc_t *); static int safte_rdstat(ses_softc_t *, int);; static int set_objstat_sel(ses_softc_t *, ses_objstat *, int); static int wrbuf16(ses_softc_t *, uint8_t, uint8_t, uint8_t, uint8_t, int); static void wrslot_stat(ses_softc_t *, int); static int perf_slotop(ses_softc_t *, uint8_t, uint8_t, int); #define ALL_ENC_STAT (SES_ENCSTAT_CRITICAL | SES_ENCSTAT_UNRECOV | \ SES_ENCSTAT_NONCRITICAL | SES_ENCSTAT_INFO) /* * SAF-TE specific defines- Mandatory ones only... */ /* * READ BUFFER ('get' commands) IDs- placed in offset 2 of cdb */ #define SAFTE_RD_RDCFG 0x00 /* read enclosure configuration */ #define SAFTE_RD_RDESTS 0x01 /* read enclosure status */ #define SAFTE_RD_RDDSTS 0x04 /* read drive slot status */ /* * WRITE BUFFER ('set' commands) IDs- placed in offset 0 of databuf */ #define SAFTE_WT_DSTAT 0x10 /* write device slot status */ #define SAFTE_WT_SLTOP 0x12 /* perform slot operation */ #define SAFTE_WT_FANSPD 0x13 /* set fan speed */ #define SAFTE_WT_ACTPWS 0x14 /* turn on/off power supply */ #define SAFTE_WT_GLOBAL 0x15 /* send global command */ #define SAFT_SCRATCH 64 #define NPSEUDO_THERM 16 #define NPSEUDO_ALARM 1 struct scfg { /* * Cached Configuration */ uint8_t Nfans; /* Number of Fans */ uint8_t Npwr; /* Number of Power Supplies */ uint8_t Nslots; /* Number of Device Slots */ uint8_t DoorLock; /* Door Lock Installed */ uint8_t Ntherm; /* Number of Temperature Sensors */ uint8_t Nspkrs; /* Number of Speakers */ uint8_t Nalarm; /* Number of Alarms (at least one) */ /* * Cached Flag Bytes for Global Status */ uint8_t flag1; uint8_t flag2; /* * What object index ID is where various slots start. */ uint8_t pwroff; uint8_t slotoff; #define SAFT_ALARM_OFFSET(cc) (cc)->slotoff - 1 }; #define SAFT_FLG1_ALARM 0x1 #define SAFT_FLG1_GLOBFAIL 0x2 #define SAFT_FLG1_GLOBWARN 0x4 #define SAFT_FLG1_ENCPWROFF 0x8 #define SAFT_FLG1_ENCFANFAIL 0x10 #define SAFT_FLG1_ENCPWRFAIL 0x20 #define SAFT_FLG1_ENCDRVFAIL 0x40 #define SAFT_FLG1_ENCDRVWARN 0x80 #define SAFT_FLG2_LOCKDOOR 0x4 #define SAFT_PRIVATE sizeof (struct scfg) static char *safte_2little = "Too Little Data Returned (%d) at line %d\n"; #define SAFT_BAIL(r, x, k, l) \ if ((r) >= (x)) { \ SES_LOG(ssc, safte_2little, x, __LINE__);\ SES_FREE((k), (l)); \ return (EIO); \ } static int safte_softc_init(ses_softc_t *ssc, int doinit) { int err, i, r; struct scfg *cc; if (doinit == 0) { if (ssc->ses_nobjects) { if (ssc->ses_objmap) { SES_FREE(ssc->ses_objmap, ssc->ses_nobjects * sizeof (encobj)); ssc->ses_objmap = NULL; } ssc->ses_nobjects = 0; } if (ssc->ses_private) { SES_FREE(ssc->ses_private, SAFT_PRIVATE); ssc->ses_private = NULL; } return (0); } if (ssc->ses_private == NULL) { ssc->ses_private = SES_MALLOC(SAFT_PRIVATE); if (ssc->ses_private == NULL) { return (ENOMEM); } MEMZERO(ssc->ses_private, SAFT_PRIVATE); } ssc->ses_nobjects = 0; ssc->ses_encstat = 0; if ((err = safte_getconfig(ssc)) != 0) { return (err); } /* * The number of objects here, as well as that reported by the * READ_BUFFER/GET_CONFIG call, are the over-temperature flags (15) * that get reported during READ_BUFFER/READ_ENC_STATUS. */ cc = ssc->ses_private; ssc->ses_nobjects = cc->Nfans + cc->Npwr + cc->Nslots + cc->DoorLock + cc->Ntherm + cc->Nspkrs + NPSEUDO_THERM + NPSEUDO_ALARM; ssc->ses_objmap = (encobj *) SES_MALLOC(ssc->ses_nobjects * sizeof (encobj)); if (ssc->ses_objmap == NULL) { return (ENOMEM); } MEMZERO(ssc->ses_objmap, ssc->ses_nobjects * sizeof (encobj)); r = 0; /* * Note that this is all arranged for the convenience * in later fetches of status. */ for (i = 0; i < cc->Nfans; i++) ssc->ses_objmap[r++].enctype = SESTYP_FAN; cc->pwroff = (uint8_t) r; for (i = 0; i < cc->Npwr; i++) ssc->ses_objmap[r++].enctype = SESTYP_POWER; for (i = 0; i < cc->DoorLock; i++) ssc->ses_objmap[r++].enctype = SESTYP_DOORLOCK; for (i = 0; i < cc->Nspkrs; i++) ssc->ses_objmap[r++].enctype = SESTYP_ALARM; for (i = 0; i < cc->Ntherm; i++) ssc->ses_objmap[r++].enctype = SESTYP_THERM; for (i = 0; i < NPSEUDO_THERM; i++) ssc->ses_objmap[r++].enctype = SESTYP_THERM; ssc->ses_objmap[r++].enctype = SESTYP_ALARM; cc->slotoff = (uint8_t) r; for (i = 0; i < cc->Nslots; i++) ssc->ses_objmap[r++].enctype = SESTYP_DEVICE; return (0); } static int safte_init_enc(ses_softc_t *ssc) { int err; static char cdb0[6] = { SEND_DIAGNOSTIC }; err = ses_runcmd(ssc, cdb0, 6, NULL, 0); if (err) { return (err); } DELAY(5000); err = wrbuf16(ssc, SAFTE_WT_GLOBAL, 0, 0, 0, 1); return (err); } static int safte_get_encstat(ses_softc_t *ssc, int slpflg) { return (safte_rdstat(ssc, slpflg)); } static int safte_set_encstat(ses_softc_t *ssc, uint8_t encstat, int slpflg) { struct scfg *cc = ssc->ses_private; if (cc == NULL) return (0); /* * Since SAF-TE devices aren't necessarily sticky in terms * of state, make our soft copy of enclosure status 'sticky'- * that is, things set in enclosure status stay set (as implied * by conditions set in reading object status) until cleared. */ ssc->ses_encstat &= ~ALL_ENC_STAT; ssc->ses_encstat |= (encstat & ALL_ENC_STAT); ssc->ses_encstat |= ENCI_SVALID; cc->flag1 &= ~(SAFT_FLG1_ALARM|SAFT_FLG1_GLOBFAIL|SAFT_FLG1_GLOBWARN); if ((encstat & (SES_ENCSTAT_CRITICAL|SES_ENCSTAT_UNRECOV)) != 0) { cc->flag1 |= SAFT_FLG1_ALARM|SAFT_FLG1_GLOBFAIL; } else if ((encstat & SES_ENCSTAT_NONCRITICAL) != 0) { cc->flag1 |= SAFT_FLG1_GLOBWARN; } return (wrbuf16(ssc, SAFTE_WT_GLOBAL, cc->flag1, cc->flag2, 0, slpflg)); } static int safte_get_objstat(ses_softc_t *ssc, ses_objstat *obp, int slpflg) { int i = (int)obp->obj_id; if ((ssc->ses_encstat & ENCI_SVALID) == 0 || (ssc->ses_objmap[i].svalid) == 0) { int err = safte_rdstat(ssc, slpflg); if (err) return (err); } obp->cstat[0] = ssc->ses_objmap[i].encstat[0]; obp->cstat[1] = ssc->ses_objmap[i].encstat[1]; obp->cstat[2] = ssc->ses_objmap[i].encstat[2]; obp->cstat[3] = ssc->ses_objmap[i].encstat[3]; return (0); } static int safte_set_objstat(ses_softc_t *ssc, ses_objstat *obp, int slp) { int idx, err; encobj *ep; struct scfg *cc; SES_DLOG(ssc, "safte_set_objstat(%d): %x %x %x %x\n", (int)obp->obj_id, obp->cstat[0], obp->cstat[1], obp->cstat[2], obp->cstat[3]); /* * If this is clear, we don't do diddly. */ if ((obp->cstat[0] & SESCTL_CSEL) == 0) { return (0); } err = 0; /* * Check to see if the common bits are set and do them first. */ if (obp->cstat[0] & ~SESCTL_CSEL) { err = set_objstat_sel(ssc, obp, slp); if (err) return (err); } cc = ssc->ses_private; if (cc == NULL) return (0); idx = (int)obp->obj_id; ep = &ssc->ses_objmap[idx]; switch (ep->enctype) { case SESTYP_DEVICE: { uint8_t slotop = 0; /* * XXX: I should probably cache the previous state * XXX: of SESCTL_DEVOFF so that when it goes from * XXX: true to false I can then set PREPARE FOR OPERATION * XXX: flag in PERFORM SLOT OPERATION write buffer command. */ if (obp->cstat[2] & (SESCTL_RQSINS|SESCTL_RQSRMV)) { slotop |= 0x2; } if (obp->cstat[2] & SESCTL_RQSID) { slotop |= 0x4; } err = perf_slotop(ssc, (uint8_t) idx - (uint8_t) cc->slotoff, slotop, slp); if (err) return (err); if (obp->cstat[3] & SESCTL_RQSFLT) { ep->priv |= 0x2; } else { ep->priv &= ~0x2; } if (ep->priv & 0xc6) { ep->priv &= ~0x1; } else { ep->priv |= 0x1; /* no errors */ } wrslot_stat(ssc, slp); break; } case SESTYP_POWER: if (obp->cstat[3] & SESCTL_RQSTFAIL) { cc->flag1 |= SAFT_FLG1_ENCPWRFAIL; } else { cc->flag1 &= ~SAFT_FLG1_ENCPWRFAIL; } err = wrbuf16(ssc, SAFTE_WT_GLOBAL, cc->flag1, cc->flag2, 0, slp); if (err) return (err); if (obp->cstat[3] & SESCTL_RQSTON) { (void) wrbuf16(ssc, SAFTE_WT_ACTPWS, idx - cc->pwroff, 0, 0, slp); } else { (void) wrbuf16(ssc, SAFTE_WT_ACTPWS, idx - cc->pwroff, 0, 1, slp); } break; case SESTYP_FAN: if (obp->cstat[3] & SESCTL_RQSTFAIL) { cc->flag1 |= SAFT_FLG1_ENCFANFAIL; } else { cc->flag1 &= ~SAFT_FLG1_ENCFANFAIL; } err = wrbuf16(ssc, SAFTE_WT_GLOBAL, cc->flag1, cc->flag2, 0, slp); if (err) return (err); if (obp->cstat[3] & SESCTL_RQSTON) { uint8_t fsp; if ((obp->cstat[3] & 0x7) == 7) { fsp = 4; } else if ((obp->cstat[3] & 0x7) == 6) { fsp = 3; } else if ((obp->cstat[3] & 0x7) == 4) { fsp = 2; } else { fsp = 1; } (void) wrbuf16(ssc, SAFTE_WT_FANSPD, idx, fsp, 0, slp); } else { (void) wrbuf16(ssc, SAFTE_WT_FANSPD, idx, 0, 0, slp); } break; case SESTYP_DOORLOCK: if (obp->cstat[3] & 0x1) { cc->flag2 &= ~SAFT_FLG2_LOCKDOOR; } else { cc->flag2 |= SAFT_FLG2_LOCKDOOR; } (void) wrbuf16(ssc, SAFTE_WT_GLOBAL, cc->flag1, cc->flag2, 0, slp); break; case SESTYP_ALARM: /* * On all nonzero but the 'muted' bit, we turn on the alarm, */ obp->cstat[3] &= ~0xa; if (obp->cstat[3] & 0x40) { cc->flag2 &= ~SAFT_FLG1_ALARM; } else if (obp->cstat[3] != 0) { cc->flag2 |= SAFT_FLG1_ALARM; } else { cc->flag2 &= ~SAFT_FLG1_ALARM; } ep->priv = obp->cstat[3]; (void) wrbuf16(ssc, SAFTE_WT_GLOBAL, cc->flag1, cc->flag2, 0, slp); break; default: break; } ep->svalid = 0; return (0); } static int safte_getconfig(ses_softc_t *ssc) { struct scfg *cfg; int err, amt; char *sdata; static char cdb[10] = { READ_BUFFER, 1, SAFTE_RD_RDCFG, 0, 0, 0, 0, 0, SAFT_SCRATCH, 0 }; cfg = ssc->ses_private; if (cfg == NULL) return (ENXIO); sdata = SES_MALLOC(SAFT_SCRATCH); if (sdata == NULL) return (ENOMEM); amt = SAFT_SCRATCH; err = ses_runcmd(ssc, cdb, 10, sdata, &amt); if (err) { SES_FREE(sdata, SAFT_SCRATCH); return (err); } amt = SAFT_SCRATCH - amt; if (amt < 6) { SES_LOG(ssc, "too little data (%d) for configuration\n", amt); SES_FREE(sdata, SAFT_SCRATCH); return (EIO); } SES_VLOG(ssc, "Nfans %d Npwr %d Nslots %d Lck %d Ntherm %d Nspkrs %d\n", sdata[0], sdata[1], sdata[2], sdata[3], sdata[4], sdata[5]); cfg->Nfans = sdata[0]; cfg->Npwr = sdata[1]; cfg->Nslots = sdata[2]; cfg->DoorLock = sdata[3]; cfg->Ntherm = sdata[4]; cfg->Nspkrs = sdata[5]; cfg->Nalarm = NPSEUDO_ALARM; SES_FREE(sdata, SAFT_SCRATCH); return (0); } static int safte_rdstat(ses_softc_t *ssc, int slpflg) { int err, oid, r, i, hiwater, nitems, amt; uint16_t tempflags; size_t buflen; uint8_t status, oencstat; char *sdata, cdb[10]; struct scfg *cc = ssc->ses_private; /* * The number of objects overstates things a bit, * both for the bogus 'thermometer' entries and * the drive status (which isn't read at the same * time as the enclosure status), but that's okay. */ buflen = 4 * cc->Nslots; if (ssc->ses_nobjects > buflen) buflen = ssc->ses_nobjects; sdata = SES_MALLOC(buflen); if (sdata == NULL) return (ENOMEM); cdb[0] = READ_BUFFER; cdb[1] = 1; cdb[2] = SAFTE_RD_RDESTS; cdb[3] = 0; cdb[4] = 0; cdb[5] = 0; cdb[6] = 0; cdb[7] = (buflen >> 8) & 0xff; cdb[8] = buflen & 0xff; cdb[9] = 0; amt = buflen; err = ses_runcmd(ssc, cdb, 10, sdata, &amt); if (err) { SES_FREE(sdata, buflen); return (err); } hiwater = buflen - amt; /* * invalidate all status bits. */ for (i = 0; i < ssc->ses_nobjects; i++) ssc->ses_objmap[i].svalid = 0; oencstat = ssc->ses_encstat & ALL_ENC_STAT; ssc->ses_encstat = 0; /* * Now parse returned buffer. * If we didn't get enough data back, * that's considered a fatal error. */ oid = r = 0; for (nitems = i = 0; i < cc->Nfans; i++) { SAFT_BAIL(r, hiwater, sdata, buflen); /* * 0 = Fan Operational * 1 = Fan is malfunctioning * 2 = Fan is not present * 0x80 = Unknown or Not Reportable Status */ ssc->ses_objmap[oid].encstat[1] = 0; /* resvd */ ssc->ses_objmap[oid].encstat[2] = 0; /* resvd */ switch ((int)(uint8_t)sdata[r]) { case 0: nitems++; ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; /* * We could get fancier and cache * fan speeds that we have set, but * that isn't done now. */ ssc->ses_objmap[oid].encstat[3] = 7; break; case 1: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_CRIT; /* * FAIL and FAN STOPPED synthesized */ ssc->ses_objmap[oid].encstat[3] = 0x40; /* * Enclosure marked with CRITICAL error * if only one fan or no thermometers, * else the NONCRITICAL error is set. */ if (cc->Nfans == 1 || cc->Ntherm == 0) ssc->ses_encstat |= SES_ENCSTAT_CRITICAL; else ssc->ses_encstat |= SES_ENCSTAT_NONCRITICAL; break; case 2: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_NOTINSTALLED; ssc->ses_objmap[oid].encstat[3] = 0; /* * Enclosure marked with CRITICAL error * if only one fan or no thermometers, * else the NONCRITICAL error is set. */ if (cc->Nfans == 1) ssc->ses_encstat |= SES_ENCSTAT_CRITICAL; else ssc->ses_encstat |= SES_ENCSTAT_NONCRITICAL; break; case 0x80: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNKNOWN; ssc->ses_objmap[oid].encstat[3] = 0; ssc->ses_encstat |= SES_ENCSTAT_INFO; break; default: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNSUPPORTED; SES_LOG(ssc, "Unknown fan%d status 0x%x\n", i, sdata[r] & 0xff); break; } ssc->ses_objmap[oid++].svalid = 1; r++; } /* * No matter how you cut it, no cooling elements when there * should be some there is critical. */ if (cc->Nfans && nitems == 0) { ssc->ses_encstat |= SES_ENCSTAT_CRITICAL; } for (i = 0; i < cc->Npwr; i++) { SAFT_BAIL(r, hiwater, sdata, buflen); ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNKNOWN; ssc->ses_objmap[oid].encstat[1] = 0; /* resvd */ ssc->ses_objmap[oid].encstat[2] = 0; /* resvd */ ssc->ses_objmap[oid].encstat[3] = 0x20; /* requested on */ switch ((uint8_t)sdata[r]) { case 0x00: /* pws operational and on */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; break; case 0x01: /* pws operational and off */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; ssc->ses_objmap[oid].encstat[3] = 0x10; ssc->ses_encstat |= SES_ENCSTAT_INFO; break; case 0x10: /* pws is malfunctioning and commanded on */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_CRIT; ssc->ses_objmap[oid].encstat[3] = 0x61; ssc->ses_encstat |= SES_ENCSTAT_NONCRITICAL; break; case 0x11: /* pws is malfunctioning and commanded off */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_NONCRIT; ssc->ses_objmap[oid].encstat[3] = 0x51; ssc->ses_encstat |= SES_ENCSTAT_NONCRITICAL; break; case 0x20: /* pws is not present */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_NOTINSTALLED; ssc->ses_objmap[oid].encstat[3] = 0; ssc->ses_encstat |= SES_ENCSTAT_INFO; break; case 0x21: /* pws is present */ /* * This is for enclosures that cannot tell whether the * device is on or malfunctioning, but know that it is * present. Just fall through. */ /* FALLTHROUGH */ case 0x80: /* Unknown or Not Reportable Status */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNKNOWN; ssc->ses_objmap[oid].encstat[3] = 0; ssc->ses_encstat |= SES_ENCSTAT_INFO; break; default: SES_LOG(ssc, "unknown power supply %d status (0x%x)\n", i, sdata[r] & 0xff); break; } ssc->ses_objmap[oid++].svalid = 1; r++; } /* * Skip over Slot SCSI IDs */ r += cc->Nslots; /* * We always have doorlock status, no matter what, * but we only save the status if we have one. */ SAFT_BAIL(r, hiwater, sdata, buflen); if (cc->DoorLock) { /* * 0 = Door Locked * 1 = Door Unlocked, or no Lock Installed * 0x80 = Unknown or Not Reportable Status */ ssc->ses_objmap[oid].encstat[1] = 0; ssc->ses_objmap[oid].encstat[2] = 0; switch ((uint8_t)sdata[r]) { case 0: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; ssc->ses_objmap[oid].encstat[3] = 0; break; case 1: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; ssc->ses_objmap[oid].encstat[3] = 1; break; case 0x80: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNKNOWN; ssc->ses_objmap[oid].encstat[3] = 0; ssc->ses_encstat |= SES_ENCSTAT_INFO; break; default: ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNSUPPORTED; SES_LOG(ssc, "unknown lock status 0x%x\n", sdata[r] & 0xff); break; } ssc->ses_objmap[oid++].svalid = 1; } r++; /* * We always have speaker status, no matter what, * but we only save the status if we have one. */ SAFT_BAIL(r, hiwater, sdata, buflen); if (cc->Nspkrs) { ssc->ses_objmap[oid].encstat[1] = 0; ssc->ses_objmap[oid].encstat[2] = 0; if (sdata[r] == 1) { /* * We need to cache tone urgency indicators. * Someday. */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_NONCRIT; ssc->ses_objmap[oid].encstat[3] = 0x8; ssc->ses_encstat |= SES_ENCSTAT_NONCRITICAL; } else if (sdata[r] == 0) { ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; ssc->ses_objmap[oid].encstat[3] = 0; } else { ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNSUPPORTED; ssc->ses_objmap[oid].encstat[3] = 0; SES_LOG(ssc, "unknown spkr status 0x%x\n", sdata[r] & 0xff); } ssc->ses_objmap[oid++].svalid = 1; } r++; for (i = 0; i < cc->Ntherm; i++) { SAFT_BAIL(r, hiwater, sdata, buflen); /* * Status is a range from -10 to 245 deg Celsius, * which we need to normalize to -20 to -245 according * to the latest SCSI spec, which makes little * sense since this would overflow an 8bit value. * Well, still, the base normalization is -20, * not -10, so we have to adjust. * * So what's over and under temperature? * Hmm- we'll state that 'normal' operating * is 10 to 40 deg Celsius. */ /* * Actually.... All of the units that people out in the world * seem to have do not come even close to setting a value that * complies with this spec. * * The closest explanation I could find was in an * LSI-Logic manual, which seemed to indicate that * this value would be set by whatever the I2C code * would interpolate from the output of an LM75 * temperature sensor. * * This means that it is impossible to use the actual * numeric value to predict anything. But we don't want * to lose the value. So, we'll propagate the *uncorrected* * value and set SES_OBJSTAT_NOTAVAIL. We'll depend on the * temperature flags for warnings. */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_NOTAVAIL; ssc->ses_objmap[oid].encstat[1] = 0; ssc->ses_objmap[oid].encstat[2] = sdata[r]; ssc->ses_objmap[oid].encstat[3] = 0;; ssc->ses_objmap[oid++].svalid = 1; r++; } /* * Now, for "pseudo" thermometers, we have two bytes * of information in enclosure status- 16 bits. Actually, * the MSB is a single TEMP ALERT flag indicating whether * any other bits are set, but, thanks to fuzzy thinking, * in the SAF-TE spec, this can also be set even if no * other bits are set, thus making this really another * binary temperature sensor. */ SAFT_BAIL(r, hiwater, sdata, buflen); tempflags = sdata[r++]; SAFT_BAIL(r, hiwater, sdata, buflen); tempflags |= (tempflags << 8) | sdata[r++]; for (i = 0; i < NPSEUDO_THERM; i++) { ssc->ses_objmap[oid].encstat[1] = 0; if (tempflags & (1 << (NPSEUDO_THERM - i - 1))) { ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_CRIT; ssc->ses_objmap[4].encstat[2] = 0xff; /* * Set 'over temperature' failure. */ ssc->ses_objmap[oid].encstat[3] = 8; ssc->ses_encstat |= SES_ENCSTAT_CRITICAL; } else { /* * We used to say 'not available' and synthesize a * nominal 30 deg (C)- that was wrong. Actually, * Just say 'OK', and use the reserved value of * zero. */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; ssc->ses_objmap[oid].encstat[2] = 0; ssc->ses_objmap[oid].encstat[3] = 0; } ssc->ses_objmap[oid++].svalid = 1; } /* * Get alarm status. */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; ssc->ses_objmap[oid].encstat[3] = ssc->ses_objmap[oid].priv; ssc->ses_objmap[oid++].svalid = 1; /* * Now get drive slot status */ cdb[2] = SAFTE_RD_RDDSTS; amt = buflen; err = ses_runcmd(ssc, cdb, 10, sdata, &amt); if (err) { SES_FREE(sdata, buflen); return (err); } hiwater = buflen - amt; for (r = i = 0; i < cc->Nslots; i++, r += 4) { SAFT_BAIL(r+3, hiwater, sdata, buflen); ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_UNSUPPORTED; ssc->ses_objmap[oid].encstat[1] = (uint8_t) i; ssc->ses_objmap[oid].encstat[2] = 0; ssc->ses_objmap[oid].encstat[3] = 0; status = sdata[r+3]; if ((status & 0x1) == 0) { /* no device */ ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_NOTINSTALLED; } else { ssc->ses_objmap[oid].encstat[0] = SES_OBJSTAT_OK; } if (status & 0x2) { ssc->ses_objmap[oid].encstat[2] = 0x8; } if ((status & 0x4) == 0) { ssc->ses_objmap[oid].encstat[3] = 0x10; } ssc->ses_objmap[oid++].svalid = 1; } /* see comment below about sticky enclosure status */ ssc->ses_encstat |= ENCI_SVALID | oencstat; SES_FREE(sdata, buflen); return (0); } static int set_objstat_sel(ses_softc_t *ssc, ses_objstat *obp, int slp) { int idx; encobj *ep; struct scfg *cc = ssc->ses_private; if (cc == NULL) return (0); idx = (int)obp->obj_id; ep = &ssc->ses_objmap[idx]; switch (ep->enctype) { case SESTYP_DEVICE: if (obp->cstat[0] & SESCTL_PRDFAIL) { ep->priv |= 0x40; } /* SESCTL_RSTSWAP has no correspondence in SAF-TE */ if (obp->cstat[0] & SESCTL_DISABLE) { ep->priv |= 0x80; /* * Hmm. Try to set the 'No Drive' flag. * Maybe that will count as a 'disable'. */ } if (ep->priv & 0xc6) { ep->priv &= ~0x1; } else { ep->priv |= 0x1; /* no errors */ } wrslot_stat(ssc, slp); break; case SESTYP_POWER: /* * Okay- the only one that makes sense here is to * do the 'disable' for a power supply. */ if (obp->cstat[0] & SESCTL_DISABLE) { (void) wrbuf16(ssc, SAFTE_WT_ACTPWS, idx - cc->pwroff, 0, 0, slp); } break; case SESTYP_FAN: /* * Okay- the only one that makes sense here is to * set fan speed to zero on disable. */ if (obp->cstat[0] & SESCTL_DISABLE) { /* remember- fans are the first items, so idx works */ (void) wrbuf16(ssc, SAFTE_WT_FANSPD, idx, 0, 0, slp); } break; case SESTYP_DOORLOCK: /* * Well, we can 'disable' the lock. */ if (obp->cstat[0] & SESCTL_DISABLE) { cc->flag2 &= ~SAFT_FLG2_LOCKDOOR; (void) wrbuf16(ssc, SAFTE_WT_GLOBAL, cc->flag1, cc->flag2, 0, slp); } break; case SESTYP_ALARM: /* * Well, we can 'disable' the alarm. */ if (obp->cstat[0] & SESCTL_DISABLE) { cc->flag2 &= ~SAFT_FLG1_ALARM; ep->priv |= 0x40; /* Muted */ (void) wrbuf16(ssc, SAFTE_WT_GLOBAL, cc->flag1, cc->flag2, 0, slp); } break; default: break; } ep->svalid = 0; return (0); } /* * This function handles all of the 16 byte WRITE BUFFER commands. */ static int wrbuf16(ses_softc_t *ssc, uint8_t op, uint8_t b1, uint8_t b2, uint8_t b3, int slp) { int err, amt; char *sdata; struct scfg *cc = ssc->ses_private; static char cdb[10] = { WRITE_BUFFER, 1, 0, 0, 0, 0, 0, 0, 16, 0 }; if (cc == NULL) return (0); sdata = SES_MALLOC(16); if (sdata == NULL) return (ENOMEM); SES_DLOG(ssc, "saf_wrbuf16 %x %x %x %x\n", op, b1, b2, b3); sdata[0] = op; sdata[1] = b1; sdata[2] = b2; sdata[3] = b3; MEMZERO(&sdata[4], 12); amt = -16; err = ses_runcmd(ssc, cdb, 10, sdata, &amt); SES_FREE(sdata, 16); return (err); } /* * This function updates the status byte for the device slot described. * * Since this is an optional SAF-TE command, there's no point in * returning an error. */ static void wrslot_stat(ses_softc_t *ssc, int slp) { int i, amt; encobj *ep; char cdb[10], *sdata; struct scfg *cc = ssc->ses_private; if (cc == NULL) return; SES_DLOG(ssc, "saf_wrslot\n"); cdb[0] = WRITE_BUFFER; cdb[1] = 1; cdb[2] = 0; cdb[3] = 0; cdb[4] = 0; cdb[5] = 0; cdb[6] = 0; cdb[7] = 0; cdb[8] = cc->Nslots * 3 + 1; cdb[9] = 0; sdata = SES_MALLOC(cc->Nslots * 3 + 1); if (sdata == NULL) return; MEMZERO(sdata, cc->Nslots * 3 + 1); sdata[0] = SAFTE_WT_DSTAT; for (i = 0; i < cc->Nslots; i++) { ep = &ssc->ses_objmap[cc->slotoff + i]; SES_DLOG(ssc, "saf_wrslot %d <- %x\n", i, ep->priv & 0xff); sdata[1 + (3 * i)] = ep->priv & 0xff; } amt = -(cc->Nslots * 3 + 1); (void) ses_runcmd(ssc, cdb, 10, sdata, &amt); SES_FREE(sdata, cc->Nslots * 3 + 1); } /* * This function issues the "PERFORM SLOT OPERATION" command. */ static int perf_slotop(ses_softc_t *ssc, uint8_t slot, uint8_t opflag, int slp) { int err, amt; char *sdata; struct scfg *cc = ssc->ses_private; static char cdb[10] = { WRITE_BUFFER, 1, 0, 0, 0, 0, 0, 0, SAFT_SCRATCH, 0 }; if (cc == NULL) return (0); sdata = SES_MALLOC(SAFT_SCRATCH); if (sdata == NULL) return (ENOMEM); MEMZERO(sdata, SAFT_SCRATCH); sdata[0] = SAFTE_WT_SLTOP; sdata[1] = slot; sdata[2] = opflag; SES_DLOG(ssc, "saf_slotop slot %d op %x\n", slot, opflag); amt = -SAFT_SCRATCH; err = ses_runcmd(ssc, cdb, 10, sdata, &amt); SES_FREE(sdata, SAFT_SCRATCH); return (err); }