/* * Copyright (c) 1995, David Greenman * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: if_fxp.c,v 1.18 1996/09/20 11:05:39 davidg Exp $ */ /* * Intel EtherExpress Pro/100B PCI Fast Ethernet driver */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #ifdef IPX #include #include #endif #ifdef NS #include #include #endif #if NBPFILTER > 0 #include #include #endif #include /* for vtophys */ #include /* for vtophys */ #include /* for vtophys */ #include /* for DELAY */ #include #include struct fxp_softc { struct arpcom arpcom; /* per-interface network data */ struct fxp_csr *csr; /* control/status registers */ struct fxp_cb_tx *cbl_base; /* base of TxCB list */ struct fxp_cb_tx *cbl_first; /* first active TxCB in list */ struct fxp_cb_tx *cbl_last; /* last active TxCB in list */ struct mbuf *rfa_headm; /* first mbuf in receive frame area */ struct mbuf *rfa_tailm; /* last mbuf in receive frame area */ struct fxp_stats *fxp_stats; /* Pointer to interface stats */ int tx_queued; /* # of active TxCB's */ int promisc_mode; /* promiscuous mode enabled */ }; static u_long fxp_count; /* * Template for default configuration parameters. * See struct fxp_cb_config for the bit definitions. */ static u_char fxp_cb_config_template[] = { 0x0, 0x0, /* cb_status */ 0x80, 0x2, /* cb_command */ 0xff, 0xff, 0xff, 0xff, /* link_addr */ 0x16, /* 0 */ 0x8, /* 1 */ 0x0, /* 2 */ 0x0, /* 3 */ 0x0, /* 4 */ 0x80, /* 5 */ 0xb2, /* 6 */ 0x3, /* 7 */ 0x1, /* 8 */ 0x0, /* 9 */ 0x26, /* 10 */ 0x0, /* 11 */ 0x60, /* 12 */ 0x0, /* 13 */ 0xf2, /* 14 */ 0x48, /* 15 */ 0x0, /* 16 */ 0x40, /* 17 */ 0xf3, /* 18 */ 0x0, /* 19 */ 0x3f, /* 20 */ 0x5, /* 21 */ 0x0, 0x0 }; static inline void fxp_scb_wait __P((struct fxp_csr *)); static char *fxp_probe __P((pcici_t, pcidi_t)); static void fxp_attach __P((pcici_t, int)); static void fxp_intr __P((void *)); static void fxp_start __P((struct ifnet *)); static int fxp_ioctl __P((struct ifnet *, int, caddr_t)); static void fxp_init __P((struct ifnet *)); static void fxp_stop __P((struct fxp_softc *)); static void fxp_watchdog __P((struct ifnet *)); static void fxp_get_macaddr __P((struct fxp_softc *)); static int fxp_add_rfabuf __P((struct fxp_softc *, struct mbuf *)); static void fxp_shutdown __P((int, void *)); timeout_t fxp_stats_update; static struct pci_device fxp_device = { "fxp", fxp_probe, fxp_attach, &fxp_count, NULL }; DATA_SET(pcidevice_set, fxp_device); /* * Set initial transmit threshold at 64 (512 bytes). This is * increased by 64 (512 bytes) at a time, to maximum of 192 * (1536 bytes), if an underrun occurs. */ static int tx_threshold = 64; /* * Number of transmit control blocks. This determines the number * of transmit buffers that can be chained in the CB list. * This must be a power of two. */ #define FXP_NTXCB 128 /* * TxCB list index mask. This is used to do list wrap-around. */ #define FXP_TXCB_MASK (FXP_NTXCB - 1) /* * Number of DMA segments in a TxCB. Note that this is carefully * chosen to make the total struct size an even power of two. It's * critical that no TxCB be split across a page boundry since * no attempt is made to allocate physically contiguous memory. * * XXX - don't forget to change the hard-coded constant in the * fxp_cb_tx struct (defined in if_fxpreg.h), too! */ #define FXP_NTXSEG 29 /* * Number of receive frame area buffers. These are large so chose * wisely. */ #define FXP_NRFABUFS 32 /* * Wait for the previous command to be accepted (but not necessarily * completed). */ static inline void fxp_scb_wait(csr) struct fxp_csr *csr; { int i = 10000; while ((csr->scb_command & FXP_SCB_COMMAND_MASK) && --i); } /* * Return identification string if this is device is ours. */ static char * fxp_probe(config_id, device_id) pcici_t config_id; pcidi_t device_id; { if (((device_id & 0xffff) == FXP_VENDORID_INTEL) && ((device_id >> 16) & 0xffff) == FXP_DEVICEID_i82557) return ("Intel EtherExpress Pro/100B Fast Ethernet"); return NULL; } /* * Allocate data structures and attach the device. */ static void fxp_attach(config_id, unit) pcici_t config_id; int unit; { struct fxp_softc *sc; struct ifnet *ifp; vm_offset_t pbase; int s, i; sc = malloc(sizeof(struct fxp_softc), M_DEVBUF, M_NOWAIT); if (sc == NULL) return; bzero(sc, sizeof(struct fxp_softc)); s = splimp(); /* * Map control/status registers. */ if (!pci_map_mem(config_id, FXP_PCI_MMBA, (vm_offset_t *)&sc->csr, &pbase)) { printf("fxp%d: couldn't map memory\n", unit); goto fail; } /* * Issue a software reset. */ sc->csr->port = 0; DELAY(10); /* * Allocate our interrupt. */ if (!pci_map_int(config_id, fxp_intr, sc, &net_imask)) { printf("fxp%d: couldn't map interrupt\n", unit); goto fail; } sc->cbl_base = malloc(sizeof(struct fxp_cb_tx) * FXP_NTXCB, M_DEVBUF, M_NOWAIT); if (sc->cbl_base == NULL) goto malloc_fail; sc->fxp_stats = malloc(sizeof(struct fxp_stats), M_DEVBUF, M_NOWAIT); if (sc->fxp_stats == NULL) goto malloc_fail; bzero(sc->fxp_stats, sizeof(struct fxp_stats)); /* * Pre-allocate our receive buffers. */ for (i = 0; i < FXP_NRFABUFS; i++) { if (fxp_add_rfabuf(sc, NULL) != 0) { goto malloc_fail; } } ifp = &sc->arpcom.ac_if; ifp->if_softc = sc; ifp->if_unit = unit; ifp->if_name = "fxp"; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = fxp_ioctl; ifp->if_output = ether_output; ifp->if_start = fxp_start; ifp->if_watchdog = fxp_watchdog; ifp->if_baudrate = 100000000; fxp_get_macaddr(sc); printf("fxp%d: Ethernet address %6D\n", unit, sc->arpcom.ac_enaddr, ":"); /* * Attach the interface. */ if_attach(ifp); ether_ifattach(ifp); #if NBPFILTER > 0 bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif /* * Add shutdown hook so that DMA is disabled prior to reboot. Not * doing do could allow DMA to corrupt kernel memory during the * reboot before the driver initializes. */ at_shutdown(fxp_shutdown, sc, SHUTDOWN_POST_SYNC); splx(s); return; malloc_fail: printf("fxp%d: Failed to malloc memory\n", unit); (void) pci_unmap_int(config_id); if (sc && sc->cbl_base) free(sc->cbl_base, M_DEVBUF); if (sc && sc->fxp_stats) free(sc->fxp_stats, M_DEVBUF); /* frees entire chain */ if (sc && sc->rfa_headm) m_freem(sc->rfa_headm); fail: if (sc) free(sc, M_DEVBUF); splx(s); } /* * Read station (MAC) address from serial EEPROM. Basically, you * manually shift in the read opcode (one bit at a time) and then * shift in the address, and then you shift out the data (all of * this one bit at a time). The word size is 16 bits, so you have * to provide the address for every 16 bits of data. The MAC address * is in the first 3 words (6 bytes total). */ static void fxp_get_macaddr(sc) struct fxp_softc *sc; { struct fxp_csr *csr; u_short reg, *data; int i, x; csr = sc->csr; data = (u_short *)sc->arpcom.ac_enaddr; for (i = 0; i < 3; i++) { csr->eeprom_control = FXP_EEPROM_EECS; /* * Shift in read opcode. */ for (x = 3; x > 0; x--) { if (FXP_EEPROM_OPC_READ & (1 << (x - 1))) { reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; } else { reg = FXP_EEPROM_EECS; } csr->eeprom_control = reg; csr->eeprom_control = reg | FXP_EEPROM_EESK; DELAY(1); csr->eeprom_control = reg; DELAY(1); } /* * Shift in address. */ for (x = 6; x > 0; x--) { if (i & (1 << (x - 1))) { reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; } else { reg = FXP_EEPROM_EECS; } csr->eeprom_control = reg; csr->eeprom_control = reg | FXP_EEPROM_EESK; DELAY(1); csr->eeprom_control = reg; DELAY(1); } reg = FXP_EEPROM_EECS; data[i] = 0; /* * Shift out data. */ for (x = 16; x > 0; x--) { csr->eeprom_control = reg | FXP_EEPROM_EESK; DELAY(1); if (csr->eeprom_control & FXP_EEPROM_EEDO) data[i] |= (1 << (x - 1)); csr->eeprom_control = reg; DELAY(1); } csr->eeprom_control = 0; DELAY(1); } } /* * Device shutdown routine. Called at system shutdown after sync. The * main purpose of this routine is to shut off receiver DMA so that * kernel memory doesn't get clobbered during warmboot. */ static void fxp_shutdown(howto, sc) int howto; void *sc; { fxp_stop((struct fxp_softc *) sc); } /* * Start packet transmission on the interface. */ static void fxp_start(ifp) struct ifnet *ifp; { struct fxp_softc *sc = ifp->if_softc; struct fxp_csr *csr = sc->csr; struct fxp_cb_tx *txp; struct mbuf *m, *mb_head; int segment; txloop: /* * See if we're all filled up with buffers to transmit. */ if (sc->tx_queued >= FXP_NTXCB) return; /* * Grab a packet to transmit. */ IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, mb_head); if (mb_head == NULL) { /* * No more packets to send. */ return; } /* * Get pointer to next available (unused) descriptor. */ txp = sc->cbl_last->next; /* * Go through each of the mbufs in the chain and initialize * the transmit buffers descriptors with the physical address * and size of the mbuf. */ tbdinit: for (m = mb_head, segment = 0; m != NULL; m = m->m_next) { if (m->m_len != 0) { if (segment == FXP_NTXSEG) break; txp->tbd[segment].tb_addr = vtophys(mtod(m, vm_offset_t)); txp->tbd[segment].tb_size = m->m_len; segment++; } } if (m != NULL && segment == FXP_NTXSEG) { struct mbuf *mn; /* * We ran out of segments. We have to recopy this mbuf * chain first. */ MGETHDR(mn, M_DONTWAIT, MT_DATA); if (mn == NULL) { m_freem(mb_head); return; } if (mb_head->m_pkthdr.len > MHLEN) { MCLGET(mn, M_DONTWAIT); if ((mn->m_flags & M_EXT) == 0) { m_freem(mn); m_freem(mb_head); return; } } m_copydata(mb_head, 0, mb_head->m_pkthdr.len, mtod(mn, caddr_t)); mn->m_pkthdr.len = mn->m_len = mb_head->m_pkthdr.len; m_freem(mb_head); mb_head = mn; goto tbdinit; } txp->tbd_number = segment; txp->mb_head = mb_head; /* * Finish the initialization of this TxCB. */ txp->cb_status = 0; txp->cb_command = FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF | FXP_CB_COMMAND_S; txp->tx_threshold = tx_threshold; /* * Advance the end-of-list forward. */ sc->cbl_last->cb_command &= ~FXP_CB_COMMAND_S; sc->cbl_last = txp; /* * Advance the beginning of the list forward if there are * no other packets queued (when nothing is queued, cbl_first * sits on the last TxCB that was sent out).. */ if (sc->tx_queued == 0) sc->cbl_first = txp; sc->tx_queued++; if (csr->scb_cus == FXP_SCB_CUS_SUSPENDED) { fxp_scb_wait(csr); /* * Resume transmission. */ csr->scb_command = FXP_SCB_COMMAND_CU_RESUME; } #if NBPFILTER > 0 /* * Pass packet to bpf if there is a listener. */ if (ifp->if_bpf != NULL) bpf_mtap(ifp, mb_head); #endif /* * Set a 5 second timer just in case we don't hear from the * card again. */ ifp->if_timer = 5; goto txloop; } /* * Process interface interrupts. Returns 1 if the interrupt * was handled, 0 if it wasn't. */ static void fxp_intr(arg) void *arg; { struct fxp_softc *sc = arg; struct fxp_csr *csr = sc->csr; struct ifnet *ifp = &sc->arpcom.ac_if; u_int8_t statack; while ((statack = csr->scb_statack) != 0) { /* * First ACK all the interrupts in this pass. */ csr->scb_statack = statack; /* * Free any finished transmit mbuf chains. */ if (statack & FXP_SCB_STATACK_CNA) { struct fxp_cb_tx *txp; for (txp = sc->cbl_first; (txp->cb_status & FXP_CB_STATUS_C) != 0; txp = txp->next) { if (txp->mb_head != NULL) { m_freem(txp->mb_head); txp->mb_head = NULL; sc->tx_queued--; } if (txp->cb_command & FXP_CB_COMMAND_S) break; } sc->cbl_first = txp; /* * Clear watchdog timer. It may or may not be set * again in fxp_start(). */ ifp->if_timer = 0; fxp_start(ifp); } /* * Process receiver interrupts. If a no-resource (RNR) * condition exists, get whatever packets we can and * re-start the receiver. */ if (statack & (FXP_SCB_STATACK_FR | FXP_SCB_STATACK_RNR)) { struct mbuf *m; struct fxp_rfa *rfa; rcvloop: m = sc->rfa_headm; rfa = (struct fxp_rfa *)m->m_ext.ext_buf; if (rfa->rfa_status & FXP_RFA_STATUS_C) { /* * Remove first packet from the chain. */ sc->rfa_headm = m->m_next; m->m_next = NULL; /* * Add a new buffer to the receive chain. If this * fails, the old buffer is recycled instead. */ if (fxp_add_rfabuf(sc, m) == 0) { struct ether_header *eh; u_short total_len; total_len = rfa->actual_size & (MCLBYTES - 1); m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = total_len - sizeof(struct ether_header); eh = mtod(m, struct ether_header *); #if NBPFILTER > 0 if (ifp->if_bpf != NULL) { bpf_tap(ifp, mtod(m, caddr_t), total_len); /* * Only pass this packet up if it is for us. */ if ((ifp->if_flags & IFF_PROMISC) && (rfa->rfa_status & FXP_RFA_STATUS_IAMATCH) && (eh->ether_dhost[0] & 1) == 0) { m_freem(m); goto rcvloop; } } #endif m->m_data += sizeof(struct ether_header); ether_input(ifp, eh, m); } goto rcvloop; } if (statack & FXP_SCB_STATACK_RNR) { struct fxp_csr *csr = sc->csr; fxp_scb_wait(csr); csr->scb_general = vtophys(sc->rfa_headm->m_ext.ext_buf); csr->scb_command = FXP_SCB_COMMAND_RU_START; } } } } /* * Update packet in/out/collision statistics. The i82557 doesn't * allow you to access these counters without doing a fairly * expensive DMA to get _all_ of the statistics it maintains, so * we do this operation here only once per second. The statistics * counters in the kernel are updated from the previous dump-stats * DMA and then a new dump-stats DMA is started. The on-chip * counters are zeroed when the DMA completes. If we can't start * the DMA immediately, we don't wait - we just prepare to read * them again next time. */ void fxp_stats_update(arg) void *arg; { struct fxp_softc *sc = arg; struct ifnet *ifp = &sc->arpcom.ac_if; struct fxp_stats *sp = sc->fxp_stats; ifp->if_opackets += sp->tx_good; ifp->if_collisions += sp->tx_total_collisions; ifp->if_ipackets += sp->rx_good; ifp->if_ierrors += sp->rx_crc_errors + sp->rx_alignment_errors + sp->rx_rnr_errors + sp->rx_overrun_errors + sp->rx_shortframes; /* * If any transmit underruns occured, bump up the transmit * threshold by another 512 bytes (64 * 8). */ if (sp->tx_underruns) { ifp->if_oerrors += sp->tx_underruns; if (tx_threshold < 192) tx_threshold += 64; } /* * If there is no pending command, start another stats * dump. Otherwise punt for now. */ if ((sc->csr->scb_command & FXP_SCB_COMMAND_MASK) == 0) { /* * Start another stats dump. By waiting for it to be * accepted, we avoid having to do splhigh locking when * writing scb_command in other parts of the driver. */ sc->csr->scb_command = FXP_SCB_COMMAND_CU_DUMPRESET; fxp_scb_wait(sc->csr); } else { /* * A previous command is still waiting to be accepted. * Just zero our copy of the stats and wait for the * next timer event to update them. */ sp->tx_good = 0; sp->tx_underruns = 0; sp->tx_total_collisions = 0; sp->rx_good = 0; sp->rx_crc_errors = 0; sp->rx_alignment_errors = 0; sp->rx_rnr_errors = 0; sp->rx_overrun_errors = 0; sp->rx_shortframes = 0;; } /* * Schedule another timeout one second from now. */ timeout(fxp_stats_update, sc, hz); } /* * Stop the interface. Cancels the statistics updater and resets * the interface. */ static void fxp_stop(sc) struct fxp_softc *sc; { struct ifnet *ifp = &sc->arpcom.ac_if; struct fxp_cb_tx *txp; int i; /* * Cancel stats updater. */ untimeout(fxp_stats_update, sc); /* * Issue software reset */ sc->csr->port = 0; DELAY(10); /* * Release any xmit buffers. */ for (txp = sc->cbl_first; txp != NULL && txp->mb_head != NULL; txp = txp->next) { m_freem(txp->mb_head); txp->mb_head = NULL; } sc->tx_queued = 0; /* * Free all the receive buffers then reallocate/reinitialize */ if (sc->rfa_headm != NULL) m_freem(sc->rfa_headm); sc->rfa_headm = NULL; sc->rfa_tailm = NULL; for (i = 0; i < FXP_NRFABUFS; i++) { if (fxp_add_rfabuf(sc, NULL) != 0) { /* * This "can't happen" - we're at splimp() * and we just freed all the buffers we need * above. */ panic("fxp_stop: no buffers!"); } } ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; } /* * Watchdog/transmission transmit timeout handler. Called when a * transmission is started on the interface, but no interrupt is * received before the timeout. This usually indicates that the * card has wedged for some reason. */ static void fxp_watchdog(ifp) struct ifnet *ifp; { log(LOG_ERR, "fxp%d: device timeout\n", ifp->if_unit); ifp->if_oerrors++; fxp_init(ifp); } static void fxp_init(ifp) struct ifnet *ifp; { struct fxp_softc *sc = ifp->if_softc; struct fxp_cb_config *cbp; struct fxp_cb_ias *cb_ias; struct fxp_cb_tx *txp; struct fxp_csr *csr = sc->csr; int i, s, mcast, prm; s = splimp(); /* * Cancel any pending I/O */ fxp_stop(sc); prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0; sc->promisc_mode = prm; /* * Sleeze out here and enable reception of all multicasts if * multicasts are enabled. Ideally, we'd program the multicast * address filter to only accept specific multicasts. */ mcast = (ifp->if_flags & (IFF_MULTICAST|IFF_ALLMULTI)) ? 1 : 0; /* * Initialize base of CBL and RFA memory. Loading with zero * sets it up for regular linear addressing. */ csr->scb_general = 0; csr->scb_command = FXP_SCB_COMMAND_CU_BASE; fxp_scb_wait(csr); csr->scb_command = FXP_SCB_COMMAND_RU_BASE; /* * Initialize base of dump-stats buffer. */ fxp_scb_wait(csr); csr->scb_general = vtophys(sc->fxp_stats); csr->scb_command = FXP_SCB_COMMAND_CU_DUMP_ADR; /* * We temporarily use memory that contains the TxCB list to * construct the config CB. The TxCB list memory is rebuilt * later. */ cbp = (struct fxp_cb_config *) sc->cbl_base; /* * This bcopy is kind of disgusting, but there are a bunch of must be * zero and must be one bits in this structure and this is the easiest * way to initialize them all to proper values. */ bcopy(fxp_cb_config_template, cbp, sizeof(struct fxp_cb_config)); cbp->cb_status = 0; cbp->cb_command = FXP_CB_COMMAND_CONFIG | FXP_CB_COMMAND_EL; cbp->link_addr = -1; /* (no) next command */ cbp->byte_count = 22; /* (22) bytes to config */ cbp->rx_fifo_limit = 8; /* rx fifo threshold */ cbp->tx_fifo_limit = 0; /* tx fifo threshold */ cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */ cbp->rx_dma_bytecount = 16; /* (no) rx DMA max */ cbp->tx_dma_bytecount = 16; /* (no) tx DMA max */ cbp->dma_bce = 1; /* (enable) dma max counters */ cbp->late_scb = 0; /* (don't) defer SCB update */ cbp->tno_int = 0; /* (disable) tx not okay interrupt */ cbp->ci_int = 0; /* (do) interrupt on CU not active */ cbp->save_bf = prm; /* save bad frames */ cbp->disc_short_rx = !prm; /* discard short packets */ cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */ cbp->mediatype = 1; /* (MII) interface mode */ cbp->nsai = 1; /* (don't) disable source addr insert */ cbp->preamble_length = 2; /* (7 byte) preamble */ cbp->loopback = 0; /* (don't) loopback */ cbp->linear_priority = 0; /* (normal CSMA/CD operation) */ cbp->linear_pri_mode = 0; /* (wait after xmit only) */ cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */ cbp->promiscuous = prm; /* promiscuous mode */ cbp->bcast_disable = 0; /* (don't) disable broadcasts */ cbp->crscdt = 0; /* (CRS only) */ cbp->stripping = !prm; /* truncate rx packet to byte count */ cbp->padding = 1; /* (do) pad short tx packets */ cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */ cbp->force_fdx = 0; /* (don't) force full duplex */ cbp->fdx_pin_en = 1; /* (enable) FDX# pin */ cbp->multi_ia = 0; /* (don't) accept multiple IAs */ cbp->mc_all = mcast; /* accept all multicasts */ /* * Start the config command/DMA. */ fxp_scb_wait(csr); csr->scb_general = vtophys(cbp); csr->scb_command = FXP_SCB_COMMAND_CU_START; /* ...and wait for it to complete. */ while (!(cbp->cb_status & FXP_CB_STATUS_C)); /* * Now initialize the station address. Temporarily use the TxCB * memory area like we did above for the config CB. */ cb_ias = (struct fxp_cb_ias *) sc->cbl_base; cb_ias->cb_status = 0; cb_ias->cb_command = FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL; cb_ias->link_addr = -1; bcopy(sc->arpcom.ac_enaddr, (void *)cb_ias->macaddr, sizeof(sc->arpcom.ac_enaddr)); /* * Start the IAS (Individual Address Setup) command/DMA. */ fxp_scb_wait(csr); csr->scb_command = FXP_SCB_COMMAND_CU_START; /* ...and wait for it to complete. */ while (!(cb_ias->cb_status & FXP_CB_STATUS_C)); /* * Initialize transmit control block (TxCB) list. */ txp = sc->cbl_base; bzero(txp, sizeof(struct fxp_cb_tx) * FXP_NTXCB); for (i = 0; i < FXP_NTXCB; i++) { txp[i].cb_status = FXP_CB_STATUS_C | FXP_CB_STATUS_OK; txp[i].cb_command = FXP_CB_COMMAND_NOP; txp[i].link_addr = vtophys(&txp[(i + 1) & FXP_TXCB_MASK]); txp[i].tbd_array_addr = vtophys(&txp[i].tbd[0]); txp[i].next = &txp[(i + 1) & FXP_TXCB_MASK]; } /* * Set the stop flag on the first TxCB and start the control * unit. It will execute the NOP and then suspend. */ txp->cb_command = FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S; sc->cbl_first = sc->cbl_last = txp; sc->tx_queued = 0; fxp_scb_wait(csr); csr->scb_command = FXP_SCB_COMMAND_CU_START; /* * Initialize receiver buffer area - RFA. */ fxp_scb_wait(csr); csr->scb_general = vtophys(sc->rfa_headm->m_ext.ext_buf); csr->scb_command = FXP_SCB_COMMAND_RU_START; ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; splx(s); /* * Start stats updater. */ timeout(fxp_stats_update, sc, hz); } /* * Add a buffer to the end of the RFA buffer list. * Return 0 if successful, 1 for failure. A failure results in * adding the 'oldm' (if non-NULL) on to the end of the list - * tossing out it's old contents and recycling it. * The RFA struct is stuck at the beginning of mbuf cluster and the * data pointer is fixed up to point just past it. */ static int fxp_add_rfabuf(sc, oldm) struct fxp_softc *sc; struct mbuf *oldm; { struct mbuf *m; struct fxp_rfa *rfa, *p_rfa; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m != NULL) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); if (oldm == NULL) return 1; m = oldm; m->m_data = m->m_ext.ext_buf; } } else { if (oldm == NULL) return 1; m = oldm; m->m_data = m->m_ext.ext_buf; } /* * Get a pointer to the base of the mbuf cluster and move * data start past it. */ rfa = mtod(m, struct fxp_rfa *); m->m_data += sizeof(struct fxp_rfa); rfa->size = MCLBYTES - sizeof(struct fxp_rfa); rfa->rfa_status = 0; rfa->rfa_control = FXP_RFA_CONTROL_EL; rfa->link_addr = -1; rfa->rbd_addr = -1; rfa->actual_size = 0; /* * If there are other buffers already on the list, attach this * one to the end by fixing up the tail to point to this one. */ if (sc->rfa_headm != NULL) { p_rfa = (struct fxp_rfa *) sc->rfa_tailm->m_ext.ext_buf; sc->rfa_tailm->m_next = m; p_rfa->link_addr = vtophys(rfa); p_rfa->rfa_control &= ~FXP_RFA_CONTROL_EL; } else { sc->rfa_headm = m; } sc->rfa_tailm = m; return (m == oldm); } static int fxp_ioctl(ifp, command, data) struct ifnet *ifp; int command; caddr_t data; { struct ifaddr *ifa = (struct ifaddr *) data; struct fxp_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; int s, error = 0; s = splimp(); switch (command) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: fxp_init(ifp); /* before arpwhohas */ arp_ifinit((struct arpcom *)ifp, ifa); break; #endif #ifdef IPX /* * XXX - This code is probably wrong */ case AF_IPX: { register struct ipx_addr *ina = &(IA_SIPX(ifa)->sipx_addr); if (ipx_nullhost(*ina)) ina->x_host = *(union ipx_host *) (sc->arpcom.ac_enaddr); else { bcopy((caddr_t) ina->x_host.c_host, (caddr_t) sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr)); } /* * Set new address */ fxp_init(ifp); break; } #endif #ifdef NS /* * XXX - This code is probably wrong */ case AF_NS: { register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr); if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *) (sc->arpcom.ac_enaddr); else { bcopy((caddr_t) ina->x_host.c_host, (caddr_t) sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr)); } /* * Set new address */ fxp_init(ifp); break; } #endif default: fxp_init(ifp); break; } break; case SIOCGIFADDR: { struct sockaddr *sa; sa = (struct sockaddr *) & ifr->ifr_data; bcopy((caddr_t) sc->arpcom.ac_enaddr, (caddr_t) sa->sa_data, sizeof(sc->arpcom.ac_enaddr)); } break; case SIOCSIFFLAGS: /* * If interface is marked up and not running, then start it. * If it is marked down and running, stop it. * XXX If it's up then re-initialize it. This is so flags * such as IFF_PROMISC are handled. */ if (ifp->if_flags & IFF_UP) { fxp_init(ifp); } else { if (ifp->if_flags & IFF_RUNNING) fxp_stop(sc); } break; case SIOCADDMULTI: case SIOCDELMULTI: /* * Update out multicast list. */ error = (command == SIOCADDMULTI) ? ether_addmulti(ifr, &sc->arpcom) : ether_delmulti(ifr, &sc->arpcom); if (error == ENETRESET) { /* * Multicast list has changed; set the hardware filter * accordingly. */ fxp_init(ifp); error = 0; } break; case SIOCSIFMTU: /* * Set the interface MTU. */ if (ifr->ifr_mtu > ETHERMTU) { error = EINVAL; } else { ifp->if_mtu = ifr->ifr_mtu; } break; default: error = EINVAL; } (void) splx(s); return (error); }