#------------------------------------------------------------------------------ # # example of a configuration file for the isdn daemon # --------------------------------------------------- # # $Id: isdnd.rc,v 1.1 1999/01/10 14:30:47 hm Exp $ # # last edit-date: [Tue Jan 19 16:30:12 1999] # # NOTICE: # ======= # This configuration file is an EXAMPLE only and MUST be edited # carefully to get the desired results! # # Please read the "isdnd.rc" manual page (execute "man isdnd.rc") # for reference ! # #------------------------------------------------------------------------------ #============================================================================== # SYSTEM section: isdnd global configuration parameters #============================================================================== system # accounting # ---------- acctall = on # generate info for everything acctfile = /var/log/isdnd.acct # name & location of accounting file useacctfile = yes # generate accouting info to file # monitor # ------- monitor-allowed = no # global switch: monitor on/off monitor-port = 451 # default monitor TCP port # Monitor rights are granted due to the most specific host/net spec, i.e. in # the example below host 192.168.1.2 will have the rights specified on that # line, even so it belongs to net 192.168.1.0/24 as well. # # A monitor specification may either be: # # - the name of a local (UNIX-domain) socket; this MUST start with a "/" monitor = "/var/run/isdn-monitor" monitor-access = fullcmd monitor-access = channelstate, logevents monitor-access = callin, callout # # - a dotted-quad host spec monitor = "192.168.1.2" monitor-access = restrictedcmd, channelstate, callin, callout # # - a dotted-quad net spec with "/len" (CIDR-style) netmask spec monitor = "192.168.1.0/24" monitor-access = restrictedcmd, channelstate, callin, callout # # - a resolveable host name monitor = "rumolt" monitor-access = restrictedcmd, channelstate, callin, callout # # - a resolveable net name with "/len" netmask (s.a.) appended monitor = "up-vision-net/24" monitor-access = restrictedcmd, channelstate, callin, callout # ratesfile # --------- ratesfile = /etc/isdn/isdnd.rates # name & location of rates file # regular expression pattern matching # ----------------------------------- #regexpr = "connected.*XXX" # look for matches in log messages #regprog = connectXXX # execute program when match is found # realtime priority section # ------------------------- rtprio = 25 # modify isdnd's process priority #============================================================================== # entry section: IP over ISDN example - i call back the remote end #============================================================================== entry name = I4BIP # name for reference. This name will # be used in the logfile to identfy # this entry. # the network or telephone device # the data traffic should be routed to: usrdevicename = ipr # ipr, isp, tel, rbch usrdeviceunit = 0 # unit number # the ISDN controller number to be # used for this entry: isdncontroller = 0 # contoller to use or -1 to use any isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any # incoming only, outgoing only or both: direction = inout # in, out, inout # numbers used to verify a DIAL IN: local-phone-incoming = 321 # this is my number remote-phone-incoming = 0123456789 # this one can call in # numbers used at DIAL OUT time: local-phone-dialout = 321 # this is my number remote-phone-dialout = 00123456789 # i call this remote number # in case i have several remote # telephone numbers specified, this # is used to specify which one is # used next on dial fail or retry: remdial-handling = first # first, last or next # what happenes if someone dials in: dialin-reaction = callback # accept, reject, ignore, answer, callback # normal dialout or do i call back: dialout-type = normal # normal / calledback callbackwait = 1 # no of secs to wait before calling back # type of protocol on the B-channel: # hdlc must be specified for IP (the # ipr and isp drivers), raw must be # specified for telephone answering b1protocol = hdlc # hdlc, raw # shorthold mode and idle time # configuration: ratetype = 0 # ratesfile entry to use unitlength = 90 # unitlength to assume unitlengthsrc = rate # none, rate, cmdl, conf, aocd idletime-incoming = 120 # incoming call idle timeout idletime-outgoing = 60 # outgoing call idle timeout earlyhangup = 5 # time to hangup before an expected # next charging unit will occur # retry and recovery parameters dialretries = 3 # # of dial retries dialrandincr = off # random dial increment time recoverytime = 5 # time to wait between 2 dial tries usedown = off # set i/f down downtries = 5 # retry cycles before set down downtime = 30 # time to be in down before going up #connectprog = "ip-up" # run /etc/isdn/ip-up when an interface # has established its network connection. # example parameters are: # /etc/isdn/ip-up -d isp0 -f up -a 192.110.12.14 #disconnectprog = "ip-down" # like connectprog, but run after the connection # is closed (ISDN layer down). The actual # interface address might not be known # any more. example parameters are: # /etc/isdn/ip-up -d isp0 -f down -a 0.0.0.0 #============================================================================== # entry section: IP over ISDN example - i am called back by the remote end #============================================================================== entry name = I4BIP1 # name for reference usrdevicename = ipr # ipr, tel, rbch usrdeviceunit = 1 # unit number isdncontroller = 0 # contoller to use or -1 to use any isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any # numbers used to DIAL OUT remote-phone-dialout = 00401234567 # remote number to dial local-phone-dialout = 38 # our number to tell remote # numbers used to verify at DIAL IN local-phone-incoming = 38 # we take calls for this local number remote-phone-incoming = 00401234567 # we take calls from this remote machine b1protocol = hdlc # hdlc, raw ratetype = 0 # city unitlength = 90 # default unit length earlyhangup = 5 # safety zone unitlengthsrc = aocd # none, rate, cmdl, conf, aocd dialin-reaction = accept # accept, reject, ignore, anwer, callback dialout-type = calledback # normal or calledback dialretries = 3 recoverytime = 3 calledbackwait = 20 dialrandincr = off usedown = off downtries = 2 downtime = 30 idletime-incoming = 300 idletime-outgoing = 30 #============================================================================== # entry section: answering machine example #============================================================================== entry name = I4BTEL # name for reference usrdevicename = tel # ipr, tel, rbch usrdeviceunit = 0 # unit number isdncontroller = 0 # contoller to use or -1 to use any isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any # numbers used to verify at DIAL IN local-phone-incoming = 456 # this is my number remote-phone-incoming = * # anyone can call in dialin-reaction = answer # accept, reject, ignore, answer answerprog = answer # program to run b1protocol = raw # hdlc, raw idletime-incoming = 5 # 5 seconds idle timeout #======================================================================= # entry section: PPP example #====================================================================== entry name = I4BPPP usrdevicename = isp usrdeviceunit = 0 isdncontroller = 0 isdnchannel = -1 local-phone-incoming = 1234 remote-phone-incoming = 5678 local-phone-dialout = 1234 remote-phone-dialout = 5678 remdial-handling = first dialin-reaction = accept dialout-type = normal b1protocol = hdlc idletime-incoming = 240 idletime-outgoing = 30 ratetype = 0 unitlength = 90 unitlengthsrc = rate dialretries = 3 dialrandincr = on recoverytime = 25 usedown = off downtries = 2 downtime = 30 # EOF #########################################################################