/* $NetBSD: if_stge.c,v 1.32 2005/12/11 12:22:49 christos Exp $ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Device driver for the Sundance Tech. TC9021 10/100/1000 * Ethernet controller. */ #include __FBSDID("$FreeBSD$"); #ifdef HAVE_KERNEL_OPTION_HEADERS #include "opt_device_polling.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define STGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) MODULE_DEPEND(stge, pci, 1, 1, 1); MODULE_DEPEND(stge, ether, 1, 1, 1); MODULE_DEPEND(stge, miibus, 1, 1, 1); /* "device miibus" required. See GENERIC if you get errors here. */ #include "miibus_if.h" /* * Devices supported by this driver. */ static struct stge_product { uint16_t stge_vendorid; uint16_t stge_deviceid; const char *stge_name; } stge_products[] = { { VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST1023, "Sundance ST-1023 Gigabit Ethernet" }, { VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST2021, "Sundance ST-2021 Gigabit Ethernet" }, { VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021, "Tamarack TC9021 Gigabit Ethernet" }, { VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021_ALT, "Tamarack TC9021 Gigabit Ethernet" }, /* * The Sundance sample boards use the Sundance vendor ID, * but the Tamarack product ID. */ { VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021, "Sundance TC9021 Gigabit Ethernet" }, { VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021_ALT, "Sundance TC9021 Gigabit Ethernet" }, { VENDOR_DLINK, DEVICEID_DLINK_DL4000, "D-Link DL-4000 Gigabit Ethernet" }, { VENDOR_ANTARES, DEVICEID_ANTARES_TC9021, "Antares Gigabit Ethernet" } }; static int stge_probe(device_t); static int stge_attach(device_t); static int stge_detach(device_t); static int stge_shutdown(device_t); static int stge_suspend(device_t); static int stge_resume(device_t); static int stge_encap(struct stge_softc *, struct mbuf **); static void stge_start(struct ifnet *); static void stge_start_locked(struct ifnet *); static void stge_watchdog(struct stge_softc *); static int stge_ioctl(struct ifnet *, u_long, caddr_t); static void stge_init(void *); static void stge_init_locked(struct stge_softc *); static void stge_vlan_setup(struct stge_softc *); static void stge_stop(struct stge_softc *); static void stge_start_tx(struct stge_softc *); static void stge_start_rx(struct stge_softc *); static void stge_stop_tx(struct stge_softc *); static void stge_stop_rx(struct stge_softc *); static void stge_reset(struct stge_softc *, uint32_t); static int stge_eeprom_wait(struct stge_softc *); static void stge_read_eeprom(struct stge_softc *, int, uint16_t *); static void stge_tick(void *); static void stge_stats_update(struct stge_softc *); static void stge_set_filter(struct stge_softc *); static void stge_set_multi(struct stge_softc *); static void stge_link_task(void *, int); static void stge_intr(void *); static __inline int stge_tx_error(struct stge_softc *); static void stge_txeof(struct stge_softc *); static int stge_rxeof(struct stge_softc *); static __inline void stge_discard_rxbuf(struct stge_softc *, int); static int stge_newbuf(struct stge_softc *, int); #ifndef __NO_STRICT_ALIGNMENT static __inline struct mbuf *stge_fixup_rx(struct stge_softc *, struct mbuf *); #endif static void stge_mii_sync(struct stge_softc *); static void stge_mii_send(struct stge_softc *, uint32_t, int); static int stge_mii_readreg(struct stge_softc *, struct stge_mii_frame *); static int stge_mii_writereg(struct stge_softc *, struct stge_mii_frame *); static int stge_miibus_readreg(device_t, int, int); static int stge_miibus_writereg(device_t, int, int, int); static void stge_miibus_statchg(device_t); static int stge_mediachange(struct ifnet *); static void stge_mediastatus(struct ifnet *, struct ifmediareq *); static void stge_dmamap_cb(void *, bus_dma_segment_t *, int, int); static int stge_dma_alloc(struct stge_softc *); static void stge_dma_free(struct stge_softc *); static void stge_dma_wait(struct stge_softc *); static void stge_init_tx_ring(struct stge_softc *); static int stge_init_rx_ring(struct stge_softc *); #ifdef DEVICE_POLLING static int stge_poll(struct ifnet *, enum poll_cmd, int); #endif static void stge_setwol(struct stge_softc *); static int sysctl_int_range(SYSCTL_HANDLER_ARGS, int, int); static int sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS); static int sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS); static device_method_t stge_methods[] = { /* Device interface */ DEVMETHOD(device_probe, stge_probe), DEVMETHOD(device_attach, stge_attach), DEVMETHOD(device_detach, stge_detach), DEVMETHOD(device_shutdown, stge_shutdown), DEVMETHOD(device_suspend, stge_suspend), DEVMETHOD(device_resume, stge_resume), /* MII interface */ DEVMETHOD(miibus_readreg, stge_miibus_readreg), DEVMETHOD(miibus_writereg, stge_miibus_writereg), DEVMETHOD(miibus_statchg, stge_miibus_statchg), { 0, 0 } }; static driver_t stge_driver = { "stge", stge_methods, sizeof(struct stge_softc) }; static devclass_t stge_devclass; DRIVER_MODULE(stge, pci, stge_driver, stge_devclass, 0, 0); DRIVER_MODULE(miibus, stge, miibus_driver, miibus_devclass, 0, 0); static struct resource_spec stge_res_spec_io[] = { { SYS_RES_IOPORT, PCIR_BAR(0), RF_ACTIVE }, { SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE }, { -1, 0, 0 } }; static struct resource_spec stge_res_spec_mem[] = { { SYS_RES_MEMORY, PCIR_BAR(1), RF_ACTIVE }, { SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE }, { -1, 0, 0 } }; #define MII_SET(x) \ CSR_WRITE_1(sc, STGE_PhyCtrl, CSR_READ_1(sc, STGE_PhyCtrl) | (x)) #define MII_CLR(x) \ CSR_WRITE_1(sc, STGE_PhyCtrl, CSR_READ_1(sc, STGE_PhyCtrl) & ~(x)) /* * Sync the PHYs by setting data bit and strobing the clock 32 times. */ static void stge_mii_sync(struct stge_softc *sc) { int i; MII_SET(PC_MgmtDir | PC_MgmtData); for (i = 0; i < 32; i++) { MII_SET(PC_MgmtClk); DELAY(1); MII_CLR(PC_MgmtClk); DELAY(1); } } /* * Clock a series of bits through the MII. */ static void stge_mii_send(struct stge_softc *sc, uint32_t bits, int cnt) { int i; MII_CLR(PC_MgmtClk); for (i = (0x1 << (cnt - 1)); i; i >>= 1) { if (bits & i) MII_SET(PC_MgmtData); else MII_CLR(PC_MgmtData); DELAY(1); MII_CLR(PC_MgmtClk); DELAY(1); MII_SET(PC_MgmtClk); } } /* * Read an PHY register through the MII. */ static int stge_mii_readreg(struct stge_softc *sc, struct stge_mii_frame *frame) { int i, ack; /* * Set up frame for RX. */ frame->mii_stdelim = STGE_MII_STARTDELIM; frame->mii_opcode = STGE_MII_READOP; frame->mii_turnaround = 0; frame->mii_data = 0; CSR_WRITE_1(sc, STGE_PhyCtrl, 0 | sc->sc_PhyCtrl); /* * Turn on data xmit. */ MII_SET(PC_MgmtDir); stge_mii_sync(sc); /* * Send command/address info. */ stge_mii_send(sc, frame->mii_stdelim, 2); stge_mii_send(sc, frame->mii_opcode, 2); stge_mii_send(sc, frame->mii_phyaddr, 5); stge_mii_send(sc, frame->mii_regaddr, 5); /* Turn off xmit. */ MII_CLR(PC_MgmtDir); /* Idle bit */ MII_CLR((PC_MgmtClk | PC_MgmtData)); DELAY(1); MII_SET(PC_MgmtClk); DELAY(1); /* Check for ack */ MII_CLR(PC_MgmtClk); DELAY(1); ack = CSR_READ_1(sc, STGE_PhyCtrl) & PC_MgmtData; MII_SET(PC_MgmtClk); DELAY(1); /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for(i = 0; i < 16; i++) { MII_CLR(PC_MgmtClk); DELAY(1); MII_SET(PC_MgmtClk); DELAY(1); } goto fail; } for (i = 0x8000; i; i >>= 1) { MII_CLR(PC_MgmtClk); DELAY(1); if (!ack) { if (CSR_READ_1(sc, STGE_PhyCtrl) & PC_MgmtData) frame->mii_data |= i; DELAY(1); } MII_SET(PC_MgmtClk); DELAY(1); } fail: MII_CLR(PC_MgmtClk); DELAY(1); MII_SET(PC_MgmtClk); DELAY(1); if (ack) return(1); return(0); } /* * Write to a PHY register through the MII. */ static int stge_mii_writereg(struct stge_softc *sc, struct stge_mii_frame *frame) { /* * Set up frame for TX. */ frame->mii_stdelim = STGE_MII_STARTDELIM; frame->mii_opcode = STGE_MII_WRITEOP; frame->mii_turnaround = STGE_MII_TURNAROUND; /* * Turn on data output. */ MII_SET(PC_MgmtDir); stge_mii_sync(sc); stge_mii_send(sc, frame->mii_stdelim, 2); stge_mii_send(sc, frame->mii_opcode, 2); stge_mii_send(sc, frame->mii_phyaddr, 5); stge_mii_send(sc, frame->mii_regaddr, 5); stge_mii_send(sc, frame->mii_turnaround, 2); stge_mii_send(sc, frame->mii_data, 16); /* Idle bit. */ MII_SET(PC_MgmtClk); DELAY(1); MII_CLR(PC_MgmtClk); DELAY(1); /* * Turn off xmit. */ MII_CLR(PC_MgmtDir); return(0); } /* * sc_miibus_readreg: [mii interface function] * * Read a PHY register on the MII of the TC9021. */ static int stge_miibus_readreg(device_t dev, int phy, int reg) { struct stge_softc *sc; struct stge_mii_frame frame; int error; sc = device_get_softc(dev); if (reg == STGE_PhyCtrl) { /* XXX allow ip1000phy read STGE_PhyCtrl register. */ STGE_MII_LOCK(sc); error = CSR_READ_1(sc, STGE_PhyCtrl); STGE_MII_UNLOCK(sc); return (error); } bzero(&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; STGE_MII_LOCK(sc); error = stge_mii_readreg(sc, &frame); STGE_MII_UNLOCK(sc); if (error != 0) { /* Don't show errors for PHY probe request */ if (reg != 1) device_printf(sc->sc_dev, "phy read fail\n"); return (0); } return (frame.mii_data); } /* * stge_miibus_writereg: [mii interface function] * * Write a PHY register on the MII of the TC9021. */ static int stge_miibus_writereg(device_t dev, int phy, int reg, int val) { struct stge_softc *sc; struct stge_mii_frame frame; int error; sc = device_get_softc(dev); bzero(&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; frame.mii_data = val; STGE_MII_LOCK(sc); error = stge_mii_writereg(sc, &frame); STGE_MII_UNLOCK(sc); if (error != 0) device_printf(sc->sc_dev, "phy write fail\n"); return (0); } /* * stge_miibus_statchg: [mii interface function] * * Callback from MII layer when media changes. */ static void stge_miibus_statchg(device_t dev) { struct stge_softc *sc; sc = device_get_softc(dev); taskqueue_enqueue(taskqueue_swi, &sc->sc_link_task); } /* * stge_mediastatus: [ifmedia interface function] * * Get the current interface media status. */ static void stge_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) { struct stge_softc *sc; struct mii_data *mii; sc = ifp->if_softc; mii = device_get_softc(sc->sc_miibus); mii_pollstat(mii); ifmr->ifm_status = mii->mii_media_status; ifmr->ifm_active = mii->mii_media_active; } /* * stge_mediachange: [ifmedia interface function] * * Set hardware to newly-selected media. */ static int stge_mediachange(struct ifnet *ifp) { struct stge_softc *sc; struct mii_data *mii; sc = ifp->if_softc; mii = device_get_softc(sc->sc_miibus); mii_mediachg(mii); return (0); } static int stge_eeprom_wait(struct stge_softc *sc) { int i; for (i = 0; i < STGE_TIMEOUT; i++) { DELAY(1000); if ((CSR_READ_2(sc, STGE_EepromCtrl) & EC_EepromBusy) == 0) return (0); } return (1); } /* * stge_read_eeprom: * * Read data from the serial EEPROM. */ static void stge_read_eeprom(struct stge_softc *sc, int offset, uint16_t *data) { if (stge_eeprom_wait(sc)) device_printf(sc->sc_dev, "EEPROM failed to come ready\n"); CSR_WRITE_2(sc, STGE_EepromCtrl, EC_EepromAddress(offset) | EC_EepromOpcode(EC_OP_RR)); if (stge_eeprom_wait(sc)) device_printf(sc->sc_dev, "EEPROM read timed out\n"); *data = CSR_READ_2(sc, STGE_EepromData); } static int stge_probe(device_t dev) { struct stge_product *sp; int i; uint16_t vendor, devid; vendor = pci_get_vendor(dev); devid = pci_get_device(dev); sp = stge_products; for (i = 0; i < sizeof(stge_products)/sizeof(stge_products[0]); i++, sp++) { if (vendor == sp->stge_vendorid && devid == sp->stge_deviceid) { device_set_desc(dev, sp->stge_name); return (BUS_PROBE_DEFAULT); } } return (ENXIO); } static int stge_attach(device_t dev) { struct stge_softc *sc; struct ifnet *ifp; uint8_t enaddr[ETHER_ADDR_LEN]; int error, flags, i; uint16_t cmd; uint32_t val; error = 0; sc = device_get_softc(dev); sc->sc_dev = dev; mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF); mtx_init(&sc->sc_mii_mtx, "stge_mii_mutex", NULL, MTX_DEF); callout_init_mtx(&sc->sc_tick_ch, &sc->sc_mtx, 0); TASK_INIT(&sc->sc_link_task, 0, stge_link_task, sc); /* * Map the device. */ pci_enable_busmaster(dev); cmd = pci_read_config(dev, PCIR_COMMAND, 2); val = pci_read_config(dev, PCIR_BAR(1), 4); if ((val & 0x01) != 0) sc->sc_spec = stge_res_spec_mem; else { val = pci_read_config(dev, PCIR_BAR(0), 4); if ((val & 0x01) == 0) { device_printf(sc->sc_dev, "couldn't locate IO BAR\n"); error = ENXIO; goto fail; } sc->sc_spec = stge_res_spec_io; } error = bus_alloc_resources(dev, sc->sc_spec, sc->sc_res); if (error != 0) { device_printf(dev, "couldn't allocate %s resources\n", sc->sc_spec == stge_res_spec_mem ? "memory" : "I/O"); goto fail; } sc->sc_rev = pci_get_revid(dev); SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "rxint_nframe", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_nframe, 0, sysctl_hw_stge_rxint_nframe, "I", "stge rx interrupt nframe"); SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "rxint_dmawait", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_dmawait, 0, sysctl_hw_stge_rxint_dmawait, "I", "stge rx interrupt dmawait"); /* Pull in device tunables. */ sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT; error = resource_int_value(device_get_name(dev), device_get_unit(dev), "rxint_nframe", &sc->sc_rxint_nframe); if (error == 0) { if (sc->sc_rxint_nframe < STGE_RXINT_NFRAME_MIN || sc->sc_rxint_nframe > STGE_RXINT_NFRAME_MAX) { device_printf(dev, "rxint_nframe value out of range; " "using default: %d\n", STGE_RXINT_NFRAME_DEFAULT); sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT; } } sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT; error = resource_int_value(device_get_name(dev), device_get_unit(dev), "rxint_dmawait", &sc->sc_rxint_dmawait); if (error == 0) { if (sc->sc_rxint_dmawait < STGE_RXINT_DMAWAIT_MIN || sc->sc_rxint_dmawait > STGE_RXINT_DMAWAIT_MAX) { device_printf(dev, "rxint_dmawait value out of range; " "using default: %d\n", STGE_RXINT_DMAWAIT_DEFAULT); sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT; } } if ((error = stge_dma_alloc(sc) != 0)) goto fail; /* * Determine if we're copper or fiber. It affects how we * reset the card. */ if (CSR_READ_4(sc, STGE_AsicCtrl) & AC_PhyMedia) sc->sc_usefiber = 1; else sc->sc_usefiber = 0; /* Load LED configuration from EEPROM. */ stge_read_eeprom(sc, STGE_EEPROM_LEDMode, &sc->sc_led); /* * Reset the chip to a known state. */ STGE_LOCK(sc); stge_reset(sc, STGE_RESET_FULL); STGE_UNLOCK(sc); /* * Reading the station address from the EEPROM doesn't seem * to work, at least on my sample boards. Instead, since * the reset sequence does AutoInit, read it from the station * address registers. For Sundance 1023 you can only read it * from EEPROM. */ if (pci_get_device(dev) != DEVICEID_SUNDANCETI_ST1023) { uint16_t v; v = CSR_READ_2(sc, STGE_StationAddress0); enaddr[0] = v & 0xff; enaddr[1] = v >> 8; v = CSR_READ_2(sc, STGE_StationAddress1); enaddr[2] = v & 0xff; enaddr[3] = v >> 8; v = CSR_READ_2(sc, STGE_StationAddress2); enaddr[4] = v & 0xff; enaddr[5] = v >> 8; sc->sc_stge1023 = 0; } else { uint16_t myaddr[ETHER_ADDR_LEN / 2]; for (i = 0; i sc_stge1023 = 1; } ifp = sc->sc_ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { device_printf(sc->sc_dev, "failed to if_alloc()\n"); error = ENXIO; goto fail; } ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = stge_ioctl; ifp->if_start = stge_start; ifp->if_init = stge_init; ifp->if_mtu = ETHERMTU; ifp->if_snd.ifq_drv_maxlen = STGE_TX_RING_CNT - 1; IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen); IFQ_SET_READY(&ifp->if_snd); /* Revision B3 and earlier chips have checksum bug. */ if (sc->sc_rev >= 0x0c) { ifp->if_hwassist = STGE_CSUM_FEATURES; ifp->if_capabilities = IFCAP_HWCSUM; } else { ifp->if_hwassist = 0; ifp->if_capabilities = 0; } ifp->if_capabilities |= IFCAP_WOL_MAGIC; ifp->if_capenable = ifp->if_capabilities; /* * Read some important bits from the PhyCtrl register. */ sc->sc_PhyCtrl = CSR_READ_1(sc, STGE_PhyCtrl) & (PC_PhyDuplexPolarity | PC_PhyLnkPolarity); /* Set up MII bus. */ flags = MIIF_DOPAUSE; if (sc->sc_rev >= 0x40 && sc->sc_rev <= 0x4e) flags |= MIIF_MACPRIV0; error = mii_attach(sc->sc_dev, &sc->sc_miibus, ifp, stge_mediachange, stge_mediastatus, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY, flags); if (error != 0) { device_printf(sc->sc_dev, "attaching PHYs failed\n"); goto fail; } ether_ifattach(ifp, enaddr); /* VLAN capability setup */ ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING; if (sc->sc_rev >= 0x0c) ifp->if_capabilities |= IFCAP_VLAN_HWCSUM; ifp->if_capenable = ifp->if_capabilities; #ifdef DEVICE_POLLING ifp->if_capabilities |= IFCAP_POLLING; #endif /* * Tell the upper layer(s) we support long frames. * Must appear after the call to ether_ifattach() because * ether_ifattach() sets ifi_hdrlen to the default value. */ ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); /* * The manual recommends disabling early transmit, so we * do. It's disabled anyway, if using IP checksumming, * since the entire packet must be in the FIFO in order * for the chip to perform the checksum. */ sc->sc_txthresh = 0x0fff; /* * Disable MWI if the PCI layer tells us to. */ sc->sc_DMACtrl = 0; if ((cmd & PCIM_CMD_MWRICEN) == 0) sc->sc_DMACtrl |= DMAC_MWIDisable; /* * Hookup IRQ */ error = bus_setup_intr(dev, sc->sc_res[1], INTR_TYPE_NET | INTR_MPSAFE, NULL, stge_intr, sc, &sc->sc_ih); if (error != 0) { ether_ifdetach(ifp); device_printf(sc->sc_dev, "couldn't set up IRQ\n"); sc->sc_ifp = NULL; goto fail; } fail: if (error != 0) stge_detach(dev); return (error); } static int stge_detach(device_t dev) { struct stge_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); ifp = sc->sc_ifp; #ifdef DEVICE_POLLING if (ifp && ifp->if_capenable & IFCAP_POLLING) ether_poll_deregister(ifp); #endif if (device_is_attached(dev)) { STGE_LOCK(sc); /* XXX */ sc->sc_detach = 1; stge_stop(sc); STGE_UNLOCK(sc); callout_drain(&sc->sc_tick_ch); taskqueue_drain(taskqueue_swi, &sc->sc_link_task); ether_ifdetach(ifp); } if (sc->sc_miibus != NULL) { device_delete_child(dev, sc->sc_miibus); sc->sc_miibus = NULL; } bus_generic_detach(dev); stge_dma_free(sc); if (ifp != NULL) { if_free(ifp); sc->sc_ifp = NULL; } if (sc->sc_ih) { bus_teardown_intr(dev, sc->sc_res[1], sc->sc_ih); sc->sc_ih = NULL; } bus_release_resources(dev, sc->sc_spec, sc->sc_res); mtx_destroy(&sc->sc_mii_mtx); mtx_destroy(&sc->sc_mtx); return (0); } struct stge_dmamap_arg { bus_addr_t stge_busaddr; }; static void stge_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) { struct stge_dmamap_arg *ctx; if (error != 0) return; ctx = (struct stge_dmamap_arg *)arg; ctx->stge_busaddr = segs[0].ds_addr; } static int stge_dma_alloc(struct stge_softc *sc) { struct stge_dmamap_arg ctx; struct stge_txdesc *txd; struct stge_rxdesc *rxd; int error, i; /* create parent tag. */ error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev),/* parent */ 1, 0, /* algnmnt, boundary */ STGE_DMA_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ BUS_SPACE_MAXSIZE_32BIT, /* maxsize */ 0, /* nsegments */ BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->sc_cdata.stge_parent_tag); if (error != 0) { device_printf(sc->sc_dev, "failed to create parent DMA tag\n"); goto fail; } /* create tag for Tx ring. */ error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */ STGE_RING_ALIGN, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ STGE_TX_RING_SZ, /* maxsize */ 1, /* nsegments */ STGE_TX_RING_SZ, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->sc_cdata.stge_tx_ring_tag); if (error != 0) { device_printf(sc->sc_dev, "failed to allocate Tx ring DMA tag\n"); goto fail; } /* create tag for Rx ring. */ error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */ STGE_RING_ALIGN, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ STGE_RX_RING_SZ, /* maxsize */ 1, /* nsegments */ STGE_RX_RING_SZ, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->sc_cdata.stge_rx_ring_tag); if (error != 0) { device_printf(sc->sc_dev, "failed to allocate Rx ring DMA tag\n"); goto fail; } /* create tag for Tx buffers. */ error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */ 1, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MCLBYTES * STGE_MAXTXSEGS, /* maxsize */ STGE_MAXTXSEGS, /* nsegments */ MCLBYTES, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->sc_cdata.stge_tx_tag); if (error != 0) { device_printf(sc->sc_dev, "failed to allocate Tx DMA tag\n"); goto fail; } /* create tag for Rx buffers. */ error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */ 1, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MCLBYTES, /* maxsize */ 1, /* nsegments */ MCLBYTES, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->sc_cdata.stge_rx_tag); if (error != 0) { device_printf(sc->sc_dev, "failed to allocate Rx DMA tag\n"); goto fail; } /* allocate DMA'able memory and load the DMA map for Tx ring. */ error = bus_dmamem_alloc(sc->sc_cdata.stge_tx_ring_tag, (void **)&sc->sc_rdata.stge_tx_ring, BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->sc_cdata.stge_tx_ring_map); if (error != 0) { device_printf(sc->sc_dev, "failed to allocate DMA'able memory for Tx ring\n"); goto fail; } ctx.stge_busaddr = 0; error = bus_dmamap_load(sc->sc_cdata.stge_tx_ring_tag, sc->sc_cdata.stge_tx_ring_map, sc->sc_rdata.stge_tx_ring, STGE_TX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT); if (error != 0 || ctx.stge_busaddr == 0) { device_printf(sc->sc_dev, "failed to load DMA'able memory for Tx ring\n"); goto fail; } sc->sc_rdata.stge_tx_ring_paddr = ctx.stge_busaddr; /* allocate DMA'able memory and load the DMA map for Rx ring. */ error = bus_dmamem_alloc(sc->sc_cdata.stge_rx_ring_tag, (void **)&sc->sc_rdata.stge_rx_ring, BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->sc_cdata.stge_rx_ring_map); if (error != 0) { device_printf(sc->sc_dev, "failed to allocate DMA'able memory for Rx ring\n"); goto fail; } ctx.stge_busaddr = 0; error = bus_dmamap_load(sc->sc_cdata.stge_rx_ring_tag, sc->sc_cdata.stge_rx_ring_map, sc->sc_rdata.stge_rx_ring, STGE_RX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT); if (error != 0 || ctx.stge_busaddr == 0) { device_printf(sc->sc_dev, "failed to load DMA'able memory for Rx ring\n"); goto fail; } sc->sc_rdata.stge_rx_ring_paddr = ctx.stge_busaddr; /* create DMA maps for Tx buffers. */ for (i = 0; i < STGE_TX_RING_CNT; i++) { txd = &sc->sc_cdata.stge_txdesc[i]; txd->tx_m = NULL; txd->tx_dmamap = 0; error = bus_dmamap_create(sc->sc_cdata.stge_tx_tag, 0, &txd->tx_dmamap); if (error != 0) { device_printf(sc->sc_dev, "failed to create Tx dmamap\n"); goto fail; } } /* create DMA maps for Rx buffers. */ if ((error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0, &sc->sc_cdata.stge_rx_sparemap)) != 0) { device_printf(sc->sc_dev, "failed to create spare Rx dmamap\n"); goto fail; } for (i = 0; i < STGE_RX_RING_CNT; i++) { rxd = &sc->sc_cdata.stge_rxdesc[i]; rxd->rx_m = NULL; rxd->rx_dmamap = 0; error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0, &rxd->rx_dmamap); if (error != 0) { device_printf(sc->sc_dev, "failed to create Rx dmamap\n"); goto fail; } } fail: return (error); } static void stge_dma_free(struct stge_softc *sc) { struct stge_txdesc *txd; struct stge_rxdesc *rxd; int i; /* Tx ring */ if (sc->sc_cdata.stge_tx_ring_tag) { if (sc->sc_cdata.stge_tx_ring_map) bus_dmamap_unload(sc->sc_cdata.stge_tx_ring_tag, sc->sc_cdata.stge_tx_ring_map); if (sc->sc_cdata.stge_tx_ring_map && sc->sc_rdata.stge_tx_ring) bus_dmamem_free(sc->sc_cdata.stge_tx_ring_tag, sc->sc_rdata.stge_tx_ring, sc->sc_cdata.stge_tx_ring_map); sc->sc_rdata.stge_tx_ring = NULL; sc->sc_cdata.stge_tx_ring_map = 0; bus_dma_tag_destroy(sc->sc_cdata.stge_tx_ring_tag); sc->sc_cdata.stge_tx_ring_tag = NULL; } /* Rx ring */ if (sc->sc_cdata.stge_rx_ring_tag) { if (sc->sc_cdata.stge_rx_ring_map) bus_dmamap_unload(sc->sc_cdata.stge_rx_ring_tag, sc->sc_cdata.stge_rx_ring_map); if (sc->sc_cdata.stge_rx_ring_map && sc->sc_rdata.stge_rx_ring) bus_dmamem_free(sc->sc_cdata.stge_rx_ring_tag, sc->sc_rdata.stge_rx_ring, sc->sc_cdata.stge_rx_ring_map); sc->sc_rdata.stge_rx_ring = NULL; sc->sc_cdata.stge_rx_ring_map = 0; bus_dma_tag_destroy(sc->sc_cdata.stge_rx_ring_tag); sc->sc_cdata.stge_rx_ring_tag = NULL; } /* Tx buffers */ if (sc->sc_cdata.stge_tx_tag) { for (i = 0; i < STGE_TX_RING_CNT; i++) { txd = &sc->sc_cdata.stge_txdesc[i]; if (txd->tx_dmamap) { bus_dmamap_destroy(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap); txd->tx_dmamap = 0; } } bus_dma_tag_destroy(sc->sc_cdata.stge_tx_tag); sc->sc_cdata.stge_tx_tag = NULL; } /* Rx buffers */ if (sc->sc_cdata.stge_rx_tag) { for (i = 0; i < STGE_RX_RING_CNT; i++) { rxd = &sc->sc_cdata.stge_rxdesc[i]; if (rxd->rx_dmamap) { bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap); rxd->rx_dmamap = 0; } } if (sc->sc_cdata.stge_rx_sparemap) { bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag, sc->sc_cdata.stge_rx_sparemap); sc->sc_cdata.stge_rx_sparemap = 0; } bus_dma_tag_destroy(sc->sc_cdata.stge_rx_tag); sc->sc_cdata.stge_rx_tag = NULL; } if (sc->sc_cdata.stge_parent_tag) { bus_dma_tag_destroy(sc->sc_cdata.stge_parent_tag); sc->sc_cdata.stge_parent_tag = NULL; } } /* * stge_shutdown: * * Make sure the interface is stopped at reboot time. */ static int stge_shutdown(device_t dev) { return (stge_suspend(dev)); } static void stge_setwol(struct stge_softc *sc) { struct ifnet *ifp; uint8_t v; STGE_LOCK_ASSERT(sc); ifp = sc->sc_ifp; v = CSR_READ_1(sc, STGE_WakeEvent); /* Disable all WOL bits. */ v &= ~(WE_WakePktEnable | WE_MagicPktEnable | WE_LinkEventEnable | WE_WakeOnLanEnable); if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) v |= WE_MagicPktEnable | WE_WakeOnLanEnable; CSR_WRITE_1(sc, STGE_WakeEvent, v); /* Reset Tx and prevent transmission. */ CSR_WRITE_4(sc, STGE_AsicCtrl, CSR_READ_4(sc, STGE_AsicCtrl) | AC_TxReset); /* * TC9021 automatically reset link speed to 100Mbps when it's put * into sleep so there is no need to try to resetting link speed. */ } static int stge_suspend(device_t dev) { struct stge_softc *sc; sc = device_get_softc(dev); STGE_LOCK(sc); stge_stop(sc); sc->sc_suspended = 1; stge_setwol(sc); STGE_UNLOCK(sc); return (0); } static int stge_resume(device_t dev) { struct stge_softc *sc; struct ifnet *ifp; uint8_t v; sc = device_get_softc(dev); STGE_LOCK(sc); /* * Clear WOL bits, so special frames wouldn't interfere * normal Rx operation anymore. */ v = CSR_READ_1(sc, STGE_WakeEvent); v &= ~(WE_WakePktEnable | WE_MagicPktEnable | WE_LinkEventEnable | WE_WakeOnLanEnable); CSR_WRITE_1(sc, STGE_WakeEvent, v); ifp = sc->sc_ifp; if (ifp->if_flags & IFF_UP) stge_init_locked(sc); sc->sc_suspended = 0; STGE_UNLOCK(sc); return (0); } static void stge_dma_wait(struct stge_softc *sc) { int i; for (i = 0; i < STGE_TIMEOUT; i++) { DELAY(2); if ((CSR_READ_4(sc, STGE_DMACtrl) & DMAC_TxDMAInProg) == 0) break; } if (i == STGE_TIMEOUT) device_printf(sc->sc_dev, "DMA wait timed out\n"); } static int stge_encap(struct stge_softc *sc, struct mbuf **m_head) { struct stge_txdesc *txd; struct stge_tfd *tfd; struct mbuf *m; bus_dma_segment_t txsegs[STGE_MAXTXSEGS]; int error, i, nsegs, si; uint64_t csum_flags, tfc; STGE_LOCK_ASSERT(sc); if ((txd = STAILQ_FIRST(&sc->sc_cdata.stge_txfreeq)) == NULL) return (ENOBUFS); error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap, *m_head, txsegs, &nsegs, 0); if (error == EFBIG) { m = m_collapse(*m_head, M_DONTWAIT, STGE_MAXTXSEGS); if (m == NULL) { m_freem(*m_head); *m_head = NULL; return (ENOMEM); } *m_head = m; error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap, *m_head, txsegs, &nsegs, 0); if (error != 0) { m_freem(*m_head); *m_head = NULL; return (error); } } else if (error != 0) return (error); if (nsegs == 0) { m_freem(*m_head); *m_head = NULL; return (EIO); } m = *m_head; csum_flags = 0; if ((m->m_pkthdr.csum_flags & STGE_CSUM_FEATURES) != 0) { if (m->m_pkthdr.csum_flags & CSUM_IP) csum_flags |= TFD_IPChecksumEnable; if (m->m_pkthdr.csum_flags & CSUM_TCP) csum_flags |= TFD_TCPChecksumEnable; else if (m->m_pkthdr.csum_flags & CSUM_UDP) csum_flags |= TFD_UDPChecksumEnable; } si = sc->sc_cdata.stge_tx_prod; tfd = &sc->sc_rdata.stge_tx_ring[si]; for (i = 0; i < nsegs; i++) tfd->tfd_frags[i].frag_word0 = htole64(FRAG_ADDR(txsegs[i].ds_addr) | FRAG_LEN(txsegs[i].ds_len)); sc->sc_cdata.stge_tx_cnt++; tfc = TFD_FrameId(si) | TFD_WordAlign(TFD_WordAlign_disable) | TFD_FragCount(nsegs) | csum_flags; if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT) tfc |= TFD_TxDMAIndicate; /* Update producer index. */ sc->sc_cdata.stge_tx_prod = (si + 1) % STGE_TX_RING_CNT; /* Check if we have a VLAN tag to insert. */ if (m->m_flags & M_VLANTAG) tfc |= (TFD_VLANTagInsert | TFD_VID(m->m_pkthdr.ether_vtag)); tfd->tfd_control = htole64(tfc); /* Update Tx Queue. */ STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txfreeq, tx_q); STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txbusyq, txd, tx_q); txd->tx_m = m; /* Sync descriptors. */ bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag, sc->sc_cdata.stge_tx_ring_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return (0); } /* * stge_start: [ifnet interface function] * * Start packet transmission on the interface. */ static void stge_start(struct ifnet *ifp) { struct stge_softc *sc; sc = ifp->if_softc; STGE_LOCK(sc); stge_start_locked(ifp); STGE_UNLOCK(sc); } static void stge_start_locked(struct ifnet *ifp) { struct stge_softc *sc; struct mbuf *m_head; int enq; sc = ifp->if_softc; STGE_LOCK_ASSERT(sc); if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) != IFF_DRV_RUNNING || sc->sc_link == 0) return; for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd); ) { if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT) { ifp->if_drv_flags |= IFF_DRV_OACTIVE; break; } IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; /* * Pack the data into the transmit ring. If we * don't have room, set the OACTIVE flag and wait * for the NIC to drain the ring. */ if (stge_encap(sc, &m_head)) { if (m_head == NULL) break; IFQ_DRV_PREPEND(&ifp->if_snd, m_head); ifp->if_drv_flags |= IFF_DRV_OACTIVE; break; } enq++; /* * If there's a BPF listener, bounce a copy of this frame * to him. */ ETHER_BPF_MTAP(ifp, m_head); } if (enq > 0) { /* Transmit */ CSR_WRITE_4(sc, STGE_DMACtrl, DMAC_TxDMAPollNow); /* Set a timeout in case the chip goes out to lunch. */ sc->sc_watchdog_timer = 5; } } /* * stge_watchdog: * * Watchdog timer handler. */ static void stge_watchdog(struct stge_softc *sc) { struct ifnet *ifp; STGE_LOCK_ASSERT(sc); if (sc->sc_watchdog_timer == 0 || --sc->sc_watchdog_timer) return; ifp = sc->sc_ifp; if_printf(sc->sc_ifp, "device timeout\n"); ifp->if_oerrors++; ifp->if_drv_flags &= ~IFF_DRV_RUNNING; stge_init_locked(sc); if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) stge_start_locked(ifp); } /* * stge_ioctl: [ifnet interface function] * * Handle control requests from the operator. */ static int stge_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct stge_softc *sc; struct ifreq *ifr; struct mii_data *mii; int error, mask; sc = ifp->if_softc; ifr = (struct ifreq *)data; error = 0; switch (cmd) { case SIOCSIFMTU: if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > STGE_JUMBO_MTU) error = EINVAL; else if (ifp->if_mtu != ifr->ifr_mtu) { ifp->if_mtu = ifr->ifr_mtu; STGE_LOCK(sc); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { ifp->if_drv_flags &= ~IFF_DRV_RUNNING; stge_init_locked(sc); } STGE_UNLOCK(sc); } break; case SIOCSIFFLAGS: STGE_LOCK(sc); if ((ifp->if_flags & IFF_UP) != 0) { if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { if (((ifp->if_flags ^ sc->sc_if_flags) & IFF_PROMISC) != 0) stge_set_filter(sc); } else { if (sc->sc_detach == 0) stge_init_locked(sc); } } else { if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) stge_stop(sc); } sc->sc_if_flags = ifp->if_flags; STGE_UNLOCK(sc); break; case SIOCADDMULTI: case SIOCDELMULTI: STGE_LOCK(sc); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) stge_set_multi(sc); STGE_UNLOCK(sc); break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: mii = device_get_softc(sc->sc_miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd); break; case SIOCSIFCAP: mask = ifr->ifr_reqcap ^ ifp->if_capenable; #ifdef DEVICE_POLLING if ((mask & IFCAP_POLLING) != 0) { if ((ifr->ifr_reqcap & IFCAP_POLLING) != 0) { error = ether_poll_register(stge_poll, ifp); if (error != 0) break; STGE_LOCK(sc); CSR_WRITE_2(sc, STGE_IntEnable, 0); ifp->if_capenable |= IFCAP_POLLING; STGE_UNLOCK(sc); } else { error = ether_poll_deregister(ifp); if (error != 0) break; STGE_LOCK(sc); CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable); ifp->if_capenable &= ~IFCAP_POLLING; STGE_UNLOCK(sc); } } #endif if ((mask & IFCAP_HWCSUM) != 0) { ifp->if_capenable ^= IFCAP_HWCSUM; if ((IFCAP_HWCSUM & ifp->if_capenable) != 0 && (IFCAP_HWCSUM & ifp->if_capabilities) != 0) ifp->if_hwassist = STGE_CSUM_FEATURES; else ifp->if_hwassist = 0; } if ((mask & IFCAP_WOL) != 0 && (ifp->if_capabilities & IFCAP_WOL) != 0) { if ((mask & IFCAP_WOL_MAGIC) != 0) ifp->if_capenable ^= IFCAP_WOL_MAGIC; } if ((mask & IFCAP_VLAN_HWTAGGING) != 0) { ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { STGE_LOCK(sc); stge_vlan_setup(sc); STGE_UNLOCK(sc); } } VLAN_CAPABILITIES(ifp); break; default: error = ether_ioctl(ifp, cmd, data); break; } return (error); } static void stge_link_task(void *arg, int pending) { struct stge_softc *sc; struct mii_data *mii; uint32_t v, ac; int i; sc = (struct stge_softc *)arg; STGE_LOCK(sc); mii = device_get_softc(sc->sc_miibus); if (mii->mii_media_status & IFM_ACTIVE) { if (IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) sc->sc_link = 1; } else sc->sc_link = 0; sc->sc_MACCtrl = 0; if (((mii->mii_media_active & IFM_GMASK) & IFM_FDX) != 0) sc->sc_MACCtrl |= MC_DuplexSelect; if (((mii->mii_media_active & IFM_GMASK) & IFM_ETH_RXPAUSE) != 0) sc->sc_MACCtrl |= MC_RxFlowControlEnable; if (((mii->mii_media_active & IFM_GMASK) & IFM_ETH_TXPAUSE) != 0) sc->sc_MACCtrl |= MC_TxFlowControlEnable; /* * Update STGE_MACCtrl register depending on link status. * (duplex, flow control etc) */ v = ac = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; v &= ~(MC_DuplexSelect|MC_RxFlowControlEnable|MC_TxFlowControlEnable); v |= sc->sc_MACCtrl; CSR_WRITE_4(sc, STGE_MACCtrl, v); if (((ac ^ sc->sc_MACCtrl) & MC_DuplexSelect) != 0) { /* Duplex setting changed, reset Tx/Rx functions. */ ac = CSR_READ_4(sc, STGE_AsicCtrl); ac |= AC_TxReset | AC_RxReset; CSR_WRITE_4(sc, STGE_AsicCtrl, ac); for (i = 0; i < STGE_TIMEOUT; i++) { DELAY(100); if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0) break; } if (i == STGE_TIMEOUT) device_printf(sc->sc_dev, "reset failed to complete\n"); } STGE_UNLOCK(sc); } static __inline int stge_tx_error(struct stge_softc *sc) { uint32_t txstat; int error; for (error = 0;;) { txstat = CSR_READ_4(sc, STGE_TxStatus); if ((txstat & TS_TxComplete) == 0) break; /* Tx underrun */ if ((txstat & TS_TxUnderrun) != 0) { /* * XXX * There should be a more better way to recover * from Tx underrun instead of a full reset. */ if (sc->sc_nerr++ < STGE_MAXERR) device_printf(sc->sc_dev, "Tx underrun, " "resetting...\n"); if (sc->sc_nerr == STGE_MAXERR) device_printf(sc->sc_dev, "too many errors; " "not reporting any more\n"); error = -1; break; } /* Maximum/Late collisions, Re-enable Tx MAC. */ if ((txstat & (TS_MaxCollisions|TS_LateCollision)) != 0) CSR_WRITE_4(sc, STGE_MACCtrl, (CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK) | MC_TxEnable); } return (error); } /* * stge_intr: * * Interrupt service routine. */ static void stge_intr(void *arg) { struct stge_softc *sc; struct ifnet *ifp; int reinit; uint16_t status; sc = (struct stge_softc *)arg; ifp = sc->sc_ifp; STGE_LOCK(sc); #ifdef DEVICE_POLLING if ((ifp->if_capenable & IFCAP_POLLING) != 0) goto done_locked; #endif status = CSR_READ_2(sc, STGE_IntStatus); if (sc->sc_suspended || (status & IS_InterruptStatus) == 0) goto done_locked; /* Disable interrupts. */ for (reinit = 0;;) { status = CSR_READ_2(sc, STGE_IntStatusAck); status &= sc->sc_IntEnable; if (status == 0) break; /* Host interface errors. */ if ((status & IS_HostError) != 0) { device_printf(sc->sc_dev, "Host interface error, resetting...\n"); reinit = 1; goto force_init; } /* Receive interrupts. */ if ((status & IS_RxDMAComplete) != 0) { stge_rxeof(sc); if ((status & IS_RFDListEnd) != 0) CSR_WRITE_4(sc, STGE_DMACtrl, DMAC_RxDMAPollNow); } /* Transmit interrupts. */ if ((status & (IS_TxDMAComplete | IS_TxComplete)) != 0) stge_txeof(sc); /* Transmission errors.*/ if ((status & IS_TxComplete) != 0) { if ((reinit = stge_tx_error(sc)) != 0) break; } } force_init: if (reinit != 0) { ifp->if_drv_flags &= ~IFF_DRV_RUNNING; stge_init_locked(sc); } /* Re-enable interrupts. */ CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable); /* Try to get more packets going. */ if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) stge_start_locked(ifp); done_locked: STGE_UNLOCK(sc); } /* * stge_txeof: * * Helper; handle transmit interrupts. */ static void stge_txeof(struct stge_softc *sc) { struct ifnet *ifp; struct stge_txdesc *txd; uint64_t control; int cons; STGE_LOCK_ASSERT(sc); ifp = sc->sc_ifp; txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq); if (txd == NULL) return; bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag, sc->sc_cdata.stge_tx_ring_map, BUS_DMASYNC_POSTREAD); /* * Go through our Tx list and free mbufs for those * frames which have been transmitted. */ for (cons = sc->sc_cdata.stge_tx_cons;; cons = (cons + 1) % STGE_TX_RING_CNT) { if (sc->sc_cdata.stge_tx_cnt <= 0) break; control = le64toh(sc->sc_rdata.stge_tx_ring[cons].tfd_control); if ((control & TFD_TFDDone) == 0) break; sc->sc_cdata.stge_tx_cnt--; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap); /* Output counter is updated with statistics register */ m_freem(txd->tx_m); txd->tx_m = NULL; STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txbusyq, tx_q); STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q); txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq); } sc->sc_cdata.stge_tx_cons = cons; if (sc->sc_cdata.stge_tx_cnt == 0) sc->sc_watchdog_timer = 0; bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag, sc->sc_cdata.stge_tx_ring_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); } static __inline void stge_discard_rxbuf(struct stge_softc *sc, int idx) { struct stge_rfd *rfd; rfd = &sc->sc_rdata.stge_rx_ring[idx]; rfd->rfd_status = 0; } #ifndef __NO_STRICT_ALIGNMENT /* * It seems that TC9021's DMA engine has alignment restrictions in * DMA scatter operations. The first DMA segment has no address * alignment restrictins but the rest should be aligned on 4(?) bytes * boundary. Otherwise it would corrupt random memory. Since we don't * know which one is used for the first segment in advance we simply * don't align at all. * To avoid copying over an entire frame to align, we allocate a new * mbuf and copy ethernet header to the new mbuf. The new mbuf is * prepended into the existing mbuf chain. */ static __inline struct mbuf * stge_fixup_rx(struct stge_softc *sc, struct mbuf *m) { struct mbuf *n; n = NULL; if (m->m_len <= (MCLBYTES - ETHER_HDR_LEN)) { bcopy(m->m_data, m->m_data + ETHER_HDR_LEN, m->m_len); m->m_data += ETHER_HDR_LEN; n = m; } else { MGETHDR(n, M_DONTWAIT, MT_DATA); if (n != NULL) { bcopy(m->m_data, n->m_data, ETHER_HDR_LEN); m->m_data += ETHER_HDR_LEN; m->m_len -= ETHER_HDR_LEN; n->m_len = ETHER_HDR_LEN; M_MOVE_PKTHDR(n, m); n->m_next = m; } else m_freem(m); } return (n); } #endif /* * stge_rxeof: * * Helper; handle receive interrupts. */ static int stge_rxeof(struct stge_softc *sc) { struct ifnet *ifp; struct stge_rxdesc *rxd; struct mbuf *mp, *m; uint64_t status64; uint32_t status; int cons, prog, rx_npkts; STGE_LOCK_ASSERT(sc); rx_npkts = 0; ifp = sc->sc_ifp; bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag, sc->sc_cdata.stge_rx_ring_map, BUS_DMASYNC_POSTREAD); prog = 0; for (cons = sc->sc_cdata.stge_rx_cons; prog < STGE_RX_RING_CNT; prog++, cons = (cons + 1) % STGE_RX_RING_CNT) { status64 = le64toh(sc->sc_rdata.stge_rx_ring[cons].rfd_status); status = RFD_RxStatus(status64); if ((status & RFD_RFDDone) == 0) break; #ifdef DEVICE_POLLING if (ifp->if_capenable & IFCAP_POLLING) { if (sc->sc_cdata.stge_rxcycles <= 0) break; sc->sc_cdata.stge_rxcycles--; } #endif prog++; rxd = &sc->sc_cdata.stge_rxdesc[cons]; mp = rxd->rx_m; /* * If the packet had an error, drop it. Note we count * the error later in the periodic stats update. */ if ((status & RFD_FrameEnd) != 0 && (status & (RFD_RxFIFOOverrun | RFD_RxRuntFrame | RFD_RxAlignmentError | RFD_RxFCSError | RFD_RxLengthError)) != 0) { stge_discard_rxbuf(sc, cons); if (sc->sc_cdata.stge_rxhead != NULL) { m_freem(sc->sc_cdata.stge_rxhead); STGE_RXCHAIN_RESET(sc); } continue; } /* * Add a new receive buffer to the ring. */ if (stge_newbuf(sc, cons) != 0) { ifp->if_iqdrops++; stge_discard_rxbuf(sc, cons); if (sc->sc_cdata.stge_rxhead != NULL) { m_freem(sc->sc_cdata.stge_rxhead); STGE_RXCHAIN_RESET(sc); } continue; } if ((status & RFD_FrameEnd) != 0) mp->m_len = RFD_RxDMAFrameLen(status) - sc->sc_cdata.stge_rxlen; sc->sc_cdata.stge_rxlen += mp->m_len; /* Chain mbufs. */ if (sc->sc_cdata.stge_rxhead == NULL) { sc->sc_cdata.stge_rxhead = mp; sc->sc_cdata.stge_rxtail = mp; } else { mp->m_flags &= ~M_PKTHDR; sc->sc_cdata.stge_rxtail->m_next = mp; sc->sc_cdata.stge_rxtail = mp; } if ((status & RFD_FrameEnd) != 0) { m = sc->sc_cdata.stge_rxhead; m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = sc->sc_cdata.stge_rxlen; if (m->m_pkthdr.len > sc->sc_if_framesize) { m_freem(m); STGE_RXCHAIN_RESET(sc); continue; } /* * Set the incoming checksum information for * the packet. */ if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) { if ((status & RFD_IPDetected) != 0) { m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; if ((status & RFD_IPError) == 0) m->m_pkthdr.csum_flags |= CSUM_IP_VALID; } if (((status & RFD_TCPDetected) != 0 && (status & RFD_TCPError) == 0) || ((status & RFD_UDPDetected) != 0 && (status & RFD_UDPError) == 0)) { m->m_pkthdr.csum_flags |= (CSUM_DATA_VALID | CSUM_PSEUDO_HDR); m->m_pkthdr.csum_data = 0xffff; } } #ifndef __NO_STRICT_ALIGNMENT if (sc->sc_if_framesize > (MCLBYTES - ETHER_ALIGN)) { if ((m = stge_fixup_rx(sc, m)) == NULL) { STGE_RXCHAIN_RESET(sc); continue; } } #endif /* Check for VLAN tagged packets. */ if ((status & RFD_VLANDetected) != 0 && (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) { m->m_pkthdr.ether_vtag = RFD_TCI(status64); m->m_flags |= M_VLANTAG; } STGE_UNLOCK(sc); /* Pass it on. */ (*ifp->if_input)(ifp, m); STGE_LOCK(sc); rx_npkts++; STGE_RXCHAIN_RESET(sc); } } if (prog > 0) { /* Update the consumer index. */ sc->sc_cdata.stge_rx_cons = cons; bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag, sc->sc_cdata.stge_rx_ring_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); } return (rx_npkts); } #ifdef DEVICE_POLLING static int stge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) { struct stge_softc *sc; uint16_t status; int rx_npkts; rx_npkts = 0; sc = ifp->if_softc; STGE_LOCK(sc); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { STGE_UNLOCK(sc); return (rx_npkts); } sc->sc_cdata.stge_rxcycles = count; rx_npkts = stge_rxeof(sc); stge_txeof(sc); if (cmd == POLL_AND_CHECK_STATUS) { status = CSR_READ_2(sc, STGE_IntStatus); status &= sc->sc_IntEnable; if (status != 0) { if ((status & IS_HostError) != 0) { device_printf(sc->sc_dev, "Host interface error, resetting...\n"); ifp->if_drv_flags &= ~IFF_DRV_RUNNING; stge_init_locked(sc); } if ((status & IS_TxComplete) != 0) { if (stge_tx_error(sc) != 0) { ifp->if_drv_flags &= ~IFF_DRV_RUNNING; stge_init_locked(sc); } } } } if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) stge_start_locked(ifp); STGE_UNLOCK(sc); return (rx_npkts); } #endif /* DEVICE_POLLING */ /* * stge_tick: * * One second timer, used to tick the MII. */ static void stge_tick(void *arg) { struct stge_softc *sc; struct mii_data *mii; sc = (struct stge_softc *)arg; STGE_LOCK_ASSERT(sc); mii = device_get_softc(sc->sc_miibus); mii_tick(mii); /* Update statistics counters. */ stge_stats_update(sc); /* * Relcaim any pending Tx descriptors to release mbufs in a * timely manner as we don't generate Tx completion interrupts * for every frame. This limits the delay to a maximum of one * second. */ if (sc->sc_cdata.stge_tx_cnt != 0) stge_txeof(sc); stge_watchdog(sc); callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc); } /* * stge_stats_update: * * Read the TC9021 statistics counters. */ static void stge_stats_update(struct stge_softc *sc) { struct ifnet *ifp; STGE_LOCK_ASSERT(sc); ifp = sc->sc_ifp; CSR_READ_4(sc,STGE_OctetRcvOk); ifp->if_ipackets += CSR_READ_4(sc, STGE_FramesRcvdOk); ifp->if_ierrors += CSR_READ_2(sc, STGE_FramesLostRxErrors); CSR_READ_4(sc, STGE_OctetXmtdOk); ifp->if_opackets += CSR_READ_4(sc, STGE_FramesXmtdOk); ifp->if_collisions += CSR_READ_4(sc, STGE_LateCollisions) + CSR_READ_4(sc, STGE_MultiColFrames) + CSR_READ_4(sc, STGE_SingleColFrames); ifp->if_oerrors += CSR_READ_2(sc, STGE_FramesAbortXSColls) + CSR_READ_2(sc, STGE_FramesWEXDeferal); } /* * stge_reset: * * Perform a soft reset on the TC9021. */ static void stge_reset(struct stge_softc *sc, uint32_t how) { uint32_t ac; uint8_t v; int i, dv; STGE_LOCK_ASSERT(sc); dv = 5000; ac = CSR_READ_4(sc, STGE_AsicCtrl); switch (how) { case STGE_RESET_TX: ac |= AC_TxReset | AC_FIFO; dv = 100; break; case STGE_RESET_RX: ac |= AC_RxReset | AC_FIFO; dv = 100; break; case STGE_RESET_FULL: default: /* * Only assert RstOut if we're fiber. We need GMII clocks * to be present in order for the reset to complete on fiber * cards. */ ac |= AC_GlobalReset | AC_RxReset | AC_TxReset | AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit | (sc->sc_usefiber ? AC_RstOut : 0); break; } CSR_WRITE_4(sc, STGE_AsicCtrl, ac); /* Account for reset problem at 10Mbps. */ DELAY(dv); for (i = 0; i < STGE_TIMEOUT; i++) { if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0) break; DELAY(dv); } if (i == STGE_TIMEOUT) device_printf(sc->sc_dev, "reset failed to complete\n"); /* Set LED, from Linux IPG driver. */ ac = CSR_READ_4(sc, STGE_AsicCtrl); ac &= ~(AC_LEDMode | AC_LEDSpeed | AC_LEDModeBit1); if ((sc->sc_led & 0x01) != 0) ac |= AC_LEDMode; if ((sc->sc_led & 0x03) != 0) ac |= AC_LEDModeBit1; if ((sc->sc_led & 0x08) != 0) ac |= AC_LEDSpeed; CSR_WRITE_4(sc, STGE_AsicCtrl, ac); /* Set PHY, from Linux IPG driver */ v = CSR_READ_1(sc, STGE_PhySet); v &= ~(PS_MemLenb9b | PS_MemLen | PS_NonCompdet); v |= ((sc->sc_led & 0x70) >> 4); CSR_WRITE_1(sc, STGE_PhySet, v); } /* * stge_init: [ ifnet interface function ] * * Initialize the interface. */ static void stge_init(void *xsc) { struct stge_softc *sc; sc = (struct stge_softc *)xsc; STGE_LOCK(sc); stge_init_locked(sc); STGE_UNLOCK(sc); } static void stge_init_locked(struct stge_softc *sc) { struct ifnet *ifp; struct mii_data *mii; uint16_t eaddr[3]; uint32_t v; int error; STGE_LOCK_ASSERT(sc); ifp = sc->sc_ifp; if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) return; mii = device_get_softc(sc->sc_miibus); /* * Cancel any pending I/O. */ stge_stop(sc); /* * Reset the chip to a known state. */ stge_reset(sc, STGE_RESET_FULL); /* Init descriptors. */ error = stge_init_rx_ring(sc); if (error != 0) { device_printf(sc->sc_dev, "initialization failed: no memory for rx buffers\n"); stge_stop(sc); goto out; } stge_init_tx_ring(sc); /* Set the station address. */ bcopy(IF_LLADDR(ifp), eaddr, ETHER_ADDR_LEN); CSR_WRITE_2(sc, STGE_StationAddress0, htole16(eaddr[0])); CSR_WRITE_2(sc, STGE_StationAddress1, htole16(eaddr[1])); CSR_WRITE_2(sc, STGE_StationAddress2, htole16(eaddr[2])); /* * Set the statistics masks. Disable all the RMON stats, * and disable selected stats in the non-RMON stats registers. */ CSR_WRITE_4(sc, STGE_RMONStatisticsMask, 0xffffffff); CSR_WRITE_4(sc, STGE_StatisticsMask, (1U << 1) | (1U << 2) | (1U << 3) | (1U << 4) | (1U << 5) | (1U << 6) | (1U << 7) | (1U << 8) | (1U << 9) | (1U << 10) | (1U << 13) | (1U << 14) | (1U << 15) | (1U << 19) | (1U << 20) | (1U << 21)); /* Set up the receive filter. */ stge_set_filter(sc); /* Program multicast filter. */ stge_set_multi(sc); /* * Give the transmit and receive ring to the chip. */ CSR_WRITE_4(sc, STGE_TFDListPtrHi, STGE_ADDR_HI(STGE_TX_RING_ADDR(sc, 0))); CSR_WRITE_4(sc, STGE_TFDListPtrLo, STGE_ADDR_LO(STGE_TX_RING_ADDR(sc, 0))); CSR_WRITE_4(sc, STGE_RFDListPtrHi, STGE_ADDR_HI(STGE_RX_RING_ADDR(sc, 0))); CSR_WRITE_4(sc, STGE_RFDListPtrLo, STGE_ADDR_LO(STGE_RX_RING_ADDR(sc, 0))); /* * Initialize the Tx auto-poll period. It's OK to make this number * large (255 is the max, but we use 127) -- we explicitly kick the * transmit engine when there's actually a packet. */ CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127); /* ..and the Rx auto-poll period. */ CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1); /* Initialize the Tx start threshold. */ CSR_WRITE_2(sc, STGE_TxStartThresh, sc->sc_txthresh); /* Rx DMA thresholds, from Linux */ CSR_WRITE_1(sc, STGE_RxDMABurstThresh, 0x30); CSR_WRITE_1(sc, STGE_RxDMAUrgentThresh, 0x30); /* Rx early threhold, from Linux */ CSR_WRITE_2(sc, STGE_RxEarlyThresh, 0x7ff); /* Tx DMA thresholds, from Linux */ CSR_WRITE_1(sc, STGE_TxDMABurstThresh, 0x30); CSR_WRITE_1(sc, STGE_TxDMAUrgentThresh, 0x04); /* * Initialize the Rx DMA interrupt control register. We * request an interrupt after every incoming packet, but * defer it for sc_rxint_dmawait us. When the number of * interrupts pending reaches STGE_RXINT_NFRAME, we stop * deferring the interrupt, and signal it immediately. */ CSR_WRITE_4(sc, STGE_RxDMAIntCtrl, RDIC_RxFrameCount(sc->sc_rxint_nframe) | RDIC_RxDMAWaitTime(STGE_RXINT_USECS2TICK(sc->sc_rxint_dmawait))); /* * Initialize the interrupt mask. */ sc->sc_IntEnable = IS_HostError | IS_TxComplete | IS_TxDMAComplete | IS_RxDMAComplete | IS_RFDListEnd; #ifdef DEVICE_POLLING /* Disable interrupts if we are polling. */ if ((ifp->if_capenable & IFCAP_POLLING) != 0) CSR_WRITE_2(sc, STGE_IntEnable, 0); else #endif CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable); /* * Configure the DMA engine. * XXX Should auto-tune TxBurstLimit. */ CSR_WRITE_4(sc, STGE_DMACtrl, sc->sc_DMACtrl | DMAC_TxBurstLimit(3)); /* * Send a PAUSE frame when we reach 29,696 bytes in the Rx * FIFO, and send an un-PAUSE frame when we reach 3056 bytes * in the Rx FIFO. */ CSR_WRITE_2(sc, STGE_FlowOnTresh, 29696 / 16); CSR_WRITE_2(sc, STGE_FlowOffThresh, 3056 / 16); /* * Set the maximum frame size. */ sc->sc_if_framesize = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN; CSR_WRITE_2(sc, STGE_MaxFrameSize, sc->sc_if_framesize); /* * Initialize MacCtrl -- do it before setting the media, * as setting the media will actually program the register. * * Note: We have to poke the IFS value before poking * anything else. */ /* Tx/Rx MAC should be disabled before programming IFS.*/ CSR_WRITE_4(sc, STGE_MACCtrl, MC_IFSSelect(MC_IFS96bit)); stge_vlan_setup(sc); if (sc->sc_rev >= 6) { /* >= B.2 */ /* Multi-frag frame bug work-around. */ CSR_WRITE_2(sc, STGE_DebugCtrl, CSR_READ_2(sc, STGE_DebugCtrl) | 0x0200); /* Tx Poll Now bug work-around. */ CSR_WRITE_2(sc, STGE_DebugCtrl, CSR_READ_2(sc, STGE_DebugCtrl) | 0x0010); /* Tx Poll Now bug work-around. */ CSR_WRITE_2(sc, STGE_DebugCtrl, CSR_READ_2(sc, STGE_DebugCtrl) | 0x0020); } v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; v |= MC_StatisticsEnable | MC_TxEnable | MC_RxEnable; CSR_WRITE_4(sc, STGE_MACCtrl, v); /* * It seems that transmitting frames without checking the state of * Rx/Tx MAC wedge the hardware. */ stge_start_tx(sc); stge_start_rx(sc); sc->sc_link = 0; /* * Set the current media. */ mii_mediachg(mii); /* * Start the one second MII clock. */ callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc); /* * ...all done! */ ifp->if_drv_flags |= IFF_DRV_RUNNING; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; out: if (error != 0) device_printf(sc->sc_dev, "interface not running\n"); } static void stge_vlan_setup(struct stge_softc *sc) { struct ifnet *ifp; uint32_t v; ifp = sc->sc_ifp; /* * The NIC always copy a VLAN tag regardless of STGE_MACCtrl * MC_AutoVLANuntagging bit. * MC_AutoVLANtagging bit selects which VLAN source to use * between STGE_VLANTag and TFC. However TFC TFD_VLANTagInsert * bit has priority over MC_AutoVLANtagging bit. So we always * use TFC instead of STGE_VLANTag register. */ v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) v |= MC_AutoVLANuntagging; else v &= ~MC_AutoVLANuntagging; CSR_WRITE_4(sc, STGE_MACCtrl, v); } /* * Stop transmission on the interface. */ static void stge_stop(struct stge_softc *sc) { struct ifnet *ifp; struct stge_txdesc *txd; struct stge_rxdesc *rxd; uint32_t v; int i; STGE_LOCK_ASSERT(sc); /* * Stop the one second clock. */ callout_stop(&sc->sc_tick_ch); sc->sc_watchdog_timer = 0; /* * Disable interrupts. */ CSR_WRITE_2(sc, STGE_IntEnable, 0); /* * Stop receiver, transmitter, and stats update. */ stge_stop_rx(sc); stge_stop_tx(sc); v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; v |= MC_StatisticsDisable; CSR_WRITE_4(sc, STGE_MACCtrl, v); /* * Stop the transmit and receive DMA. */ stge_dma_wait(sc); CSR_WRITE_4(sc, STGE_TFDListPtrHi, 0); CSR_WRITE_4(sc, STGE_TFDListPtrLo, 0); CSR_WRITE_4(sc, STGE_RFDListPtrHi, 0); CSR_WRITE_4(sc, STGE_RFDListPtrLo, 0); /* * Free RX and TX mbufs still in the queues. */ for (i = 0; i < STGE_RX_RING_CNT; i++) { rxd = &sc->sc_cdata.stge_rxdesc[i]; if (rxd->rx_m != NULL) { bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap); m_freem(rxd->rx_m); rxd->rx_m = NULL; } } for (i = 0; i < STGE_TX_RING_CNT; i++) { txd = &sc->sc_cdata.stge_txdesc[i]; if (txd->tx_m != NULL) { bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap); m_freem(txd->tx_m); txd->tx_m = NULL; } } /* * Mark the interface down and cancel the watchdog timer. */ ifp = sc->sc_ifp; ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); sc->sc_link = 0; } static void stge_start_tx(struct stge_softc *sc) { uint32_t v; int i; v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_TxEnabled) != 0) return; v |= MC_TxEnable; CSR_WRITE_4(sc, STGE_MACCtrl, v); CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127); for (i = STGE_TIMEOUT; i > 0; i--) { DELAY(10); v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_TxEnabled) != 0) break; } if (i == 0) device_printf(sc->sc_dev, "Starting Tx MAC timed out\n"); } static void stge_start_rx(struct stge_softc *sc) { uint32_t v; int i; v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_RxEnabled) != 0) return; v |= MC_RxEnable; CSR_WRITE_4(sc, STGE_MACCtrl, v); CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1); for (i = STGE_TIMEOUT; i > 0; i--) { DELAY(10); v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_RxEnabled) != 0) break; } if (i == 0) device_printf(sc->sc_dev, "Starting Rx MAC timed out\n"); } static void stge_stop_tx(struct stge_softc *sc) { uint32_t v; int i; v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_TxEnabled) == 0) return; v |= MC_TxDisable; CSR_WRITE_4(sc, STGE_MACCtrl, v); for (i = STGE_TIMEOUT; i > 0; i--) { DELAY(10); v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_TxEnabled) == 0) break; } if (i == 0) device_printf(sc->sc_dev, "Stopping Tx MAC timed out\n"); } static void stge_stop_rx(struct stge_softc *sc) { uint32_t v; int i; v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_RxEnabled) == 0) return; v |= MC_RxDisable; CSR_WRITE_4(sc, STGE_MACCtrl, v); for (i = STGE_TIMEOUT; i > 0; i--) { DELAY(10); v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK; if ((v & MC_RxEnabled) == 0) break; } if (i == 0) device_printf(sc->sc_dev, "Stopping Rx MAC timed out\n"); } static void stge_init_tx_ring(struct stge_softc *sc) { struct stge_ring_data *rd; struct stge_txdesc *txd; bus_addr_t addr; int i; STAILQ_INIT(&sc->sc_cdata.stge_txfreeq); STAILQ_INIT(&sc->sc_cdata.stge_txbusyq); sc->sc_cdata.stge_tx_prod = 0; sc->sc_cdata.stge_tx_cons = 0; sc->sc_cdata.stge_tx_cnt = 0; rd = &sc->sc_rdata; bzero(rd->stge_tx_ring, STGE_TX_RING_SZ); for (i = 0; i < STGE_TX_RING_CNT; i++) { if (i == (STGE_TX_RING_CNT - 1)) addr = STGE_TX_RING_ADDR(sc, 0); else addr = STGE_TX_RING_ADDR(sc, i + 1); rd->stge_tx_ring[i].tfd_next = htole64(addr); rd->stge_tx_ring[i].tfd_control = htole64(TFD_TFDDone); txd = &sc->sc_cdata.stge_txdesc[i]; STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q); } bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag, sc->sc_cdata.stge_tx_ring_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); } static int stge_init_rx_ring(struct stge_softc *sc) { struct stge_ring_data *rd; bus_addr_t addr; int i; sc->sc_cdata.stge_rx_cons = 0; STGE_RXCHAIN_RESET(sc); rd = &sc->sc_rdata; bzero(rd->stge_rx_ring, STGE_RX_RING_SZ); for (i = 0; i < STGE_RX_RING_CNT; i++) { if (stge_newbuf(sc, i) != 0) return (ENOBUFS); if (i == (STGE_RX_RING_CNT - 1)) addr = STGE_RX_RING_ADDR(sc, 0); else addr = STGE_RX_RING_ADDR(sc, i + 1); rd->stge_rx_ring[i].rfd_next = htole64(addr); rd->stge_rx_ring[i].rfd_status = 0; } bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag, sc->sc_cdata.stge_rx_ring_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return (0); } /* * stge_newbuf: * * Add a receive buffer to the indicated descriptor. */ static int stge_newbuf(struct stge_softc *sc, int idx) { struct stge_rxdesc *rxd; struct stge_rfd *rfd; struct mbuf *m; bus_dma_segment_t segs[1]; bus_dmamap_t map; int nsegs; m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); if (m == NULL) return (ENOBUFS); m->m_len = m->m_pkthdr.len = MCLBYTES; /* * The hardware requires 4bytes aligned DMA address when JUMBO * frame is used. */ if (sc->sc_if_framesize <= (MCLBYTES - ETHER_ALIGN)) m_adj(m, ETHER_ALIGN); if (bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_rx_tag, sc->sc_cdata.stge_rx_sparemap, m, segs, &nsegs, 0) != 0) { m_freem(m); return (ENOBUFS); } KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs)); rxd = &sc->sc_cdata.stge_rxdesc[idx]; if (rxd->rx_m != NULL) { bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap); } map = rxd->rx_dmamap; rxd->rx_dmamap = sc->sc_cdata.stge_rx_sparemap; sc->sc_cdata.stge_rx_sparemap = map; bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap, BUS_DMASYNC_PREREAD); rxd->rx_m = m; rfd = &sc->sc_rdata.stge_rx_ring[idx]; rfd->rfd_frag.frag_word0 = htole64(FRAG_ADDR(segs[0].ds_addr) | FRAG_LEN(segs[0].ds_len)); rfd->rfd_status = 0; return (0); } /* * stge_set_filter: * * Set up the receive filter. */ static void stge_set_filter(struct stge_softc *sc) { struct ifnet *ifp; uint16_t mode; STGE_LOCK_ASSERT(sc); ifp = sc->sc_ifp; mode = CSR_READ_2(sc, STGE_ReceiveMode); mode |= RM_ReceiveUnicast; if ((ifp->if_flags & IFF_BROADCAST) != 0) mode |= RM_ReceiveBroadcast; else mode &= ~RM_ReceiveBroadcast; if ((ifp->if_flags & IFF_PROMISC) != 0) mode |= RM_ReceiveAllFrames; else mode &= ~RM_ReceiveAllFrames; CSR_WRITE_2(sc, STGE_ReceiveMode, mode); } static void stge_set_multi(struct stge_softc *sc) { struct ifnet *ifp; struct ifmultiaddr *ifma; uint32_t crc; uint32_t mchash[2]; uint16_t mode; int count; STGE_LOCK_ASSERT(sc); ifp = sc->sc_ifp; mode = CSR_READ_2(sc, STGE_ReceiveMode); if ((ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0) { if ((ifp->if_flags & IFF_PROMISC) != 0) mode |= RM_ReceiveAllFrames; else if ((ifp->if_flags & IFF_ALLMULTI) != 0) mode |= RM_ReceiveMulticast; CSR_WRITE_2(sc, STGE_ReceiveMode, mode); return; } /* clear existing filters. */ CSR_WRITE_4(sc, STGE_HashTable0, 0); CSR_WRITE_4(sc, STGE_HashTable1, 0); /* * Set up the multicast address filter by passing all multicast * addresses through a CRC generator, and then using the low-order * 6 bits as an index into the 64 bit multicast hash table. The * high order bits select the register, while the rest of the bits * select the bit within the register. */ bzero(mchash, sizeof(mchash)); count = 0; if_maddr_rlock(sc->sc_ifp); TAILQ_FOREACH(ifma, &sc->sc_ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; crc = ether_crc32_be(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), ETHER_ADDR_LEN); /* Just want the 6 least significant bits. */ crc &= 0x3f; /* Set the corresponding bit in the hash table. */ mchash[crc >> 5] |= 1 << (crc & 0x1f); count++; } if_maddr_runlock(ifp); mode &= ~(RM_ReceiveMulticast | RM_ReceiveAllFrames); if (count > 0) mode |= RM_ReceiveMulticastHash; else mode &= ~RM_ReceiveMulticastHash; CSR_WRITE_4(sc, STGE_HashTable0, mchash[0]); CSR_WRITE_4(sc, STGE_HashTable1, mchash[1]); CSR_WRITE_2(sc, STGE_ReceiveMode, mode); } static int sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high) { int error, value; if (!arg1) return (EINVAL); value = *(int *)arg1; error = sysctl_handle_int(oidp, &value, 0, req); if (error || !req->newptr) return (error); if (value < low || value > high) return (EINVAL); *(int *)arg1 = value; return (0); } static int sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS) { return (sysctl_int_range(oidp, arg1, arg2, req, STGE_RXINT_NFRAME_MIN, STGE_RXINT_NFRAME_MAX)); } static int sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS) { return (sysctl_int_range(oidp, arg1, arg2, req, STGE_RXINT_DMAWAIT_MIN, STGE_RXINT_DMAWAIT_MAX)); }