/*- * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #define AN_TIMEOUT 65536 /* Default network name: */ #define AN_DEFAULT_NETNAME "" /* The nodename must be less than 16 bytes */ #define AN_DEFAULT_NODENAME "FreeBSD" #define AN_DEFAULT_IBSS "FreeBSD IBSS" /* * register space access macros */ #define CSR_WRITE_2(sc, reg, val) \ bus_space_write_2(sc->an_btag, sc->an_bhandle, reg, val) #define CSR_READ_2(sc, reg) \ bus_space_read_2(sc->an_btag, sc->an_bhandle, reg) #define CSR_WRITE_1(sc, reg, val) \ bus_space_write_1(sc->an_btag, sc->an_bhandle, reg, val) #define CSR_READ_1(sc, reg) \ bus_space_read_1(sc->an_btag, sc->an_bhandle, reg) /* * memory space access macros */ #define CSR_MEM_WRITE_2(sc, reg, val) \ bus_space_write_2(sc->an_mem_btag, sc->an_mem_bhandle, reg, val) #define CSR_MEM_READ_2(sc, reg) \ bus_space_read_2(sc->an_mem_btag, sc->an_mem_bhandle, reg) #define CSR_MEM_WRITE_1(sc, reg, val) \ bus_space_write_1(sc->an_mem_btag, sc->an_mem_bhandle, reg, val) #define CSR_MEM_READ_1(sc, reg) \ bus_space_read_1(sc->an_mem_btag, sc->an_mem_bhandle, reg) /* * aux. memory space access macros */ #define CSR_MEM_AUX_WRITE_4(sc, reg, val) \ bus_space_write_4(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg, val) #define CSR_MEM_AUX_READ_4(sc, reg) \ bus_space_read_4(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg) #define CSR_MEM_AUX_WRITE_1(sc, reg, val) \ bus_space_write_1(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg, val) #define CSR_MEM_AUX_READ_1(sc, reg) \ bus_space_read_1(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg) /* * Size of Aironet I/O space. */ #define AN_IOSIZ 0x40 /* * Size of aux. memory space ... probably not needed DJA */ #define AN_AUX_MEM_SIZE (256 * 1024) /* * Hermes register definitions and what little I know about them. */ /* Hermes command/status registers. */ #define AN_COMMAND(x) (x ? 0x00 : 0x00) #define AN_PARAM0(x) (x ? 0x04 : 0x02) #define AN_PARAM1(x) (x ? 0x08 : 0x04) #define AN_PARAM2(x) (x ? 0x0c : 0x06) #define AN_STATUS(x) (x ? 0x10 : 0x08) #define AN_RESP0(x) (x ? 0x14 : 0x0A) #define AN_RESP1(x) (x ? 0x18 : 0x0C) #define AN_RESP2(x) (x ? 0x1c : 0x0E) #define AN_LINKSTAT(x) (x ? 0x20 : 0x10) /* Command register */ #define AN_CMD_BUSY 0x8000 /* busy bit */ #define AN_CMD_NO_ACK 0x0080 /* don't acknowledge command */ #define AN_CMD_CODE_MASK 0x003F #define AN_CMD_QUAL_MASK 0x7F00 /* Command codes */ #define AN_CMD_NOOP 0x0000 /* no-op */ #define AN_CMD_ENABLE 0x0001 /* enable */ #define AN_CMD_DISABLE 0x0002 /* disable */ #define AN_CMD_FORCE_SYNCLOSS 0x0003 /* force loss of sync */ #define AN_CMD_FW_RESTART 0x0004 /* firmware restart */ #define AN_CMD_HOST_SLEEP 0x0005 #define AN_CMD_MAGIC_PKT 0x0006 #define AN_CMD_READCFG 0x0008 #define AN_CMD_SET_MODE 0x0009 #define AN_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ #define AN_CMD_TX 0x000B /* transmit */ #define AN_CMD_DEALLOC_MEM 0x000C #define AN_CMD_NOOP2 0x0010 #define AN_CMD_ALLOC_DESC 0x0020 #define AN_CMD_ACCESS 0x0021 #define AN_CMD_ALLOC_BUF 0x0028 #define AN_CMD_PSP_NODES 0x0030 #define AN_CMD_SET_PHYREG 0x003E #define AN_CMD_TX_TEST 0x003F #define AN_CMD_SLEEP 0x0085 #define AN_CMD_SAVECFG 0x0108 /* * MPI 350 DMA descriptor information */ #define AN_DESCRIPTOR_TX 0x01 #define AN_DESCRIPTOR_RX 0x02 #define AN_DESCRIPTOR_TXCMP 0x04 #define AN_DESCRIPTOR_HOSTWRITE 0x08 #define AN_DESCRIPTOR_HOSTREAD 0x10 #define AN_DESCRIPTOR_HOSTRW 0x20 #define AN_MAX_RX_DESC 1 #define AN_MAX_TX_DESC 1 #define AN_HOSTBUFSIZ 1840 struct an_card_rid_desc { unsigned an_rid:16; unsigned an_len:15; unsigned an_valid:1; u_int64_t an_phys; }; struct an_card_rx_desc { unsigned an_ctrl:15; unsigned an_done:1; unsigned an_len:15; unsigned an_valid:1; u_int64_t an_phys; }; struct an_card_tx_desc { unsigned an_offset:15; unsigned an_eoc:1; unsigned an_len:15; unsigned an_valid:1; u_int64_t an_phys; }; #define AN_RID_BUFFER_SIZE AN_MAX_DATALEN #define AN_RX_BUFFER_SIZE AN_HOSTBUFSIZ #define AN_TX_BUFFER_SIZE AN_HOSTBUFSIZ /*#define AN_HOST_DESC_OFFSET 0xC sort of works */ #define AN_HOST_DESC_OFFSET 0x800 #define AN_RX_DESC_OFFSET (AN_HOST_DESC_OFFSET + \ sizeof(struct an_card_rid_desc)) #define AN_TX_DESC_OFFSET (AN_RX_DESC_OFFSET + \ (AN_MAX_RX_DESC * sizeof(struct an_card_rx_desc))) struct an_command { u_int16_t an_cmd; u_int16_t an_parm0; u_int16_t an_parm1; u_int16_t an_parm2; }; struct an_reply { u_int16_t an_status; u_int16_t an_resp0; u_int16_t an_resp1; u_int16_t an_resp2; }; /* * Reclaim qualifier bit, applicable to the * TX command. */ #define AN_RECLAIM 0x0100 /* reclaim NIC memory */ /* * ACCESS command qualifier bits. */ #define AN_ACCESS_READ 0x0000 #define AN_ACCESS_WRITE 0x0100 /* * PROGRAM command qualifier bits. */ #define AN_PROGRAM_DISABLE 0x0000 #define AN_PROGRAM_ENABLE_RAM 0x0100 #define AN_PROGRAM_ENABLE_NVRAM 0x0200 #define AN_PROGRAM_NVRAM 0x0300 /* Status register values */ #define AN_STAT_CMD_CODE 0x003F #define AN_STAT_CMD_RESULT 0x7F00 /* Linkstat register */ #define AN_LINKSTAT_ASSOCIATED 0x0400 #define AN_LINKSTAT_AUTHFAIL 0x0300 #define AN_LINKSTAT_ASSOC_FAIL 0x8400 #define AN_LINKSTAT_DISASSOC 0x8200 #define AN_LINKSTAT_DEAUTH 0x8100 #define AN_LINKSTAT_SYNCLOST_TSF 0x8004 #define AN_LINKSTAT_SYNCLOST_HOSTREQ 0x8003 #define AN_LINKSTAT_SYNCLOST_AVGRETRY 0x8002 #define AN_LINKSTAT_SYNCLOST_MAXRETRY 0x8001 #define AN_LINKSTAT_SYNCLOST_MISSBEACON 0x8000 /* memory handle management registers */ #define AN_RX_FID 0x20 #define AN_ALLOC_FID 0x22 #define AN_TX_CMP_FID(x) (x ? 0x1a : 0x24) /* * Buffer Access Path (BAP) registers. * These are I/O channels. I believe you can use each one for * any desired purpose independently of the other. In general * though, we use BAP1 for reading and writing LTV records and * reading received data frames, and BAP0 for writing transmit * frames. This is a convention though, not a rule. */ #define AN_SEL0 0x18 #define AN_SEL1 0x1A #define AN_OFF0 0x1C #define AN_OFF1 0x1E #define AN_DATA0 0x36 #define AN_DATA1 0x38 #define AN_BAP0 AN_DATA0 #define AN_BAP1 AN_DATA1 #define AN_OFF_BUSY 0x8000 #define AN_OFF_ERR 0x4000 #define AN_OFF_DONE 0x2000 #define AN_OFF_DATAOFF 0x0FFF /* Event registers */ #define AN_EVENT_STAT(x) (x ? 0x60 : 0x30) /* Event status */ #define AN_INT_EN(x) (x ? 0x64 : 0x32) /* Interrupt enable/ disable */ #define AN_EVENT_ACK(x) (x ? 0x68 : 0x34) /* Ack event */ /* Events */ #define AN_EV_CLR_STUCK_BUSY 0x4000 /* clear stuck busy bit */ #define AN_EV_WAKEREQUEST 0x2000 /* awaken from PSP mode */ #define AN_EV_MIC 0x1000 /* Message Integrity Check*/ #define AN_EV_AWAKE 0x0100 /* station woke up from PSP mode*/ #define AN_EV_LINKSTAT 0x0080 /* link status available */ #define AN_EV_CMD 0x0010 /* command completed */ #define AN_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ #define AN_EV_TX_CPY 0x0400 #define AN_EV_TX_EXC 0x0004 /* async xmit completed with failure */ #define AN_EV_TX 0x0002 /* async xmit completed succesfully */ #define AN_EV_RX 0x0001 /* async rx completed */ #define AN_INTRS(x) \ ( x ? (AN_EV_RX|AN_EV_TX|AN_EV_TX_EXC|AN_EV_TX_CPY|AN_EV_ALLOC \ |AN_EV_LINKSTAT|AN_EV_MIC) \ : \ (AN_EV_RX|AN_EV_TX|AN_EV_TX_EXC|AN_EV_ALLOC \ |AN_EV_LINKSTAT|AN_EV_MIC) \ ) /* Host software registers */ #define AN_SW0(x) (x ? 0x50 : 0x28) #define AN_SW1(x) (x ? 0x54 : 0x2A) #define AN_SW2(x) (x ? 0x58 : 0x2C) #define AN_SW3(x) (x ? 0x5c : 0x2E) #define AN_CNTL 0x14 #define AN_CNTL_AUX_ENA 0xC000 #define AN_CNTL_AUX_ENA_STAT 0xC000 #define AN_CNTL_AUX_DIS_STAT 0x0000 #define AN_CNTL_AUX_ENA_CNTL 0x8000 #define AN_CNTL_AUX_DIS_CNTL 0x4000 #define AN_AUX_PAGE 0x3A #define AN_AUX_OFFSET 0x3C #define AN_AUX_DATA 0x3E /* * Length, Type, Value (LTV) record definitions and RID values. */ struct an_ltv_gen { u_int16_t an_len; u_int16_t an_type; u_int16_t an_val; }; #define AN_DEF_SSID_LEN 7 #define AN_DEF_SSID "tsunami" #define AN_RXGAP_MAX 8 /* * Transmit frame structure. */ struct an_txframe { u_int32_t an_tx_sw; /* 0x00 */ u_int16_t an_tx_status; /* 0x04 */ u_int16_t an_tx_payload_len; /* 0x06 */ u_int16_t an_tx_ctl; /* 0x08 */ u_int16_t an_tx_assoc_id; /* 0x0A */ u_int16_t an_tx_retry; /* 0x0C */ u_int8_t an_tx_assoc_cnt; /* 0x0E */ u_int8_t an_tx_rate; /* 0x0F */ u_int8_t an_tx_max_long_retries; /* 0x10 */ u_int8_t an_tx_max_short_retries; /*0x11 */ u_int8_t an_rsvd0[2]; /* 0x12 */ u_int16_t an_frame_ctl; /* 0x14 */ u_int16_t an_duration; /* 0x16 */ u_int8_t an_addr1[6]; /* 0x18 */ u_int8_t an_addr2[6]; /* 0x1E */ u_int8_t an_addr3[6]; /* 0x24 */ u_int16_t an_seq_ctl; /* 0x2A */ u_int8_t an_addr4[6]; /* 0x2C */ u_int8_t an_gaplen; /* 0x32 */ } __packed; struct an_rxframe_802_3 { u_int16_t an_rx_802_3_status; /* 0x34 */ u_int16_t an_rx_802_3_payload_len;/* 0x36 */ u_int8_t an_rx_dst_addr[6]; /* 0x38 */ u_int8_t an_rx_src_addr[6]; /* 0x3E */ }; #define AN_RXGAP_MAX 8 struct an_txframe_802_3 { /* * Transmit 802.3 header structure. */ u_int16_t an_tx_802_3_status; /* 0x34 */ u_int16_t an_tx_802_3_payload_len;/* 0x36 */ u_int8_t an_tx_dst_addr[6]; /* 0x38 */ u_int8_t an_tx_src_addr[6]; /* 0x3E */ }; #define AN_TXSTAT_EXCESS_RETRY 0x0002 #define AN_TXSTAT_LIFE_EXCEEDED 0x0004 #define AN_TXSTAT_AID_FAIL 0x0008 #define AN_TXSTAT_MAC_DISABLED 0x0010 #define AN_TXSTAT_ASSOC_LOST 0x0020 #define AN_TXCTL_RSVD 0x0001 #define AN_TXCTL_TXOK_INTR 0x0002 #define AN_TXCTL_TXERR_INTR 0x0004 #define AN_TXCTL_HEADER_TYPE 0x0008 #define AN_TXCTL_PAYLOAD_TYPE 0x0010 #define AN_TXCTL_NORELEASE 0x0020 #define AN_TXCTL_NORETRIES 0x0040 #define AN_TXCTL_CLEAR_AID 0x0080 #define AN_TXCTL_STRICT_ORDER 0x0100 #define AN_TXCTL_USE_RTS 0x0200 #define AN_HEADERTYPE_8023 0x0000 #define AN_HEADERTYPE_80211 0x0008 #define AN_PAYLOADTYPE_ETHER 0x0000 #define AN_PAYLOADTYPE_LLC 0x0010 #define AN_TXCTL_80211 \ (AN_TXCTL_TXOK_INTR|AN_TXCTL_TXERR_INTR|AN_HEADERTYPE_80211| \ AN_PAYLOADTYPE_LLC|AN_TXCTL_NORELEASE) #define AN_TXCTL_8023 \ (AN_TXCTL_TXOK_INTR|AN_TXCTL_TXERR_INTR|AN_HEADERTYPE_8023| \ AN_PAYLOADTYPE_ETHER|AN_TXCTL_NORELEASE) #define AN_TXGAP_80211 0 #define AN_TXGAP_8023 0 struct an_802_3_hdr { u_int16_t an_8023_status; u_int16_t an_8023_payload_len; u_int8_t an_8023_dst_addr[6]; u_int8_t an_8023_src_addr[6]; u_int16_t an_8023_dat[3]; /* SNAP header */ u_int16_t an_8023_type; }; struct an_snap_hdr { u_int16_t an_snap_dat[3]; /* SNAP header */ u_int16_t an_snap_type; }; struct an_dma_alloc { u_int32_t an_dma_paddr; caddr_t an_dma_vaddr; bus_dmamap_t an_dma_map; bus_dma_segment_t an_dma_seg; bus_size_t an_dma_size; int an_dma_nseg; }; #define AN_TX_RING_CNT 4 #define AN_INC(x, y) (x) = (x + 1) % y struct an_tx_ring_data { u_int16_t an_tx_fids[AN_TX_RING_CNT]; u_int16_t an_tx_ring[AN_TX_RING_CNT]; int an_tx_prod; int an_tx_cons; int an_tx_empty; }; struct an_softc { struct ifnet *an_ifp; int port_rid; /* resource id for port range */ struct resource* port_res; /* resource for port range */ int mem_rid; /* resource id for memory range */ int mem_used; /* nonzero if memory used */ struct resource* mem_res; /* resource for memory range */ int mem_aux_rid; /* resource id for memory range */ int mem_aux_used; /* nonzero if memory used */ struct resource* mem_aux_res; /* resource for memory range */ int irq_rid; /* resource id for irq */ void* irq_handle; /* handle for irq handler */ struct resource* irq_res; /* resource for irq */ bus_space_handle_t an_bhandle_p; bus_space_handle_t an_bhandle; bus_space_tag_t an_btag; bus_space_handle_t an_mem_bhandle; bus_space_tag_t an_mem_btag; bus_space_handle_t an_mem_aux_bhandle; bus_space_tag_t an_mem_aux_btag; bus_dma_tag_t an_dtag; struct an_ltv_genconfig an_config; struct an_ltv_caps an_caps; struct an_ltv_ssidlist_new an_ssidlist; struct an_ltv_aplist an_aplist; struct an_ltv_key an_temp_keys[4]; int an_tx_rate; int an_rxmode; int an_gone; int an_if_flags; u_int8_t an_txbuf[1536]; struct an_tx_ring_data an_rdata; struct an_ltv_stats an_stats; struct an_ltv_status an_status; u_int8_t an_associated; #ifdef ANCACHE int an_sigitems; struct an_sigcache an_sigcache[MAXANCACHE]; int an_nextitem; int an_have_rssimap; struct an_ltv_rssi_map an_rssimap; #endif struct callout an_stat_ch; struct mtx an_mtx; device_t an_dev; struct ifmedia an_ifmedia; int an_monitor; int an_was_monitor; u_char buf_802_11[MCLBYTES]; struct an_req areq; unsigned short* an_flash_buffer; int mpi350; struct an_dma_alloc an_rid_buffer; struct an_dma_alloc an_rx_buffer[AN_MAX_RX_DESC]; struct an_dma_alloc an_tx_buffer[AN_MAX_TX_DESC]; }; #define AN_LOCK(_sc) mtx_lock(&(_sc)->an_mtx) #define AN_UNLOCK(_sc) mtx_unlock(&(_sc)->an_mtx) #define AN_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->an_mtx, MA_OWNED) void an_release_resources (device_t); int an_alloc_port (device_t, int, int); int an_alloc_memory (device_t, int, int); int an_alloc_aux_memory (device_t, int, int); int an_alloc_irq (device_t, int, int); int an_pci_probe (device_t); int an_probe (device_t); int an_shutdown (device_t); void an_resume (device_t); int an_attach (struct an_softc *, int, int); int an_detach (device_t); void an_stop (struct an_softc *); driver_intr_t an_intr; #define AN_802_3_OFFSET 0x2E #define AN_802_11_OFFSET 0x44 #define AN_802_11_OFFSET_RAW 0x3C #define AN_STAT_BADCRC 0x0001 #define AN_STAT_UNDECRYPTABLE 0x0002 #define AN_STAT_ERRSTAT 0x0003 #define AN_STAT_MAC_PORT 0x0700 #define AN_STAT_1042 0x2000 /* RFC1042 encoded */ #define AN_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ #define AN_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ #define AN_RXSTAT_MSG_TYPE 0xE000 #define AN_ENC_TX_802_3 0x00 #define AN_ENC_TX_802_11 0x11 #define AN_ENC_TX_E_II 0x0E #define AN_ENC_TX_1042 0x00 #define AN_ENC_TX_TUNNEL 0xF8 #define AN_TXCNTL_MACPORT 0x00FF #define AN_TXCNTL_STRUCTTYPE 0xFF00 /* * SNAP (sub-network access protocol) constants for transmission * of IP datagrams over IEEE 802 networks, taken from RFC1042. * We need these for the LLC/SNAP header fields in the TX/RX frame * structure. */ #define AN_SNAP_K1 0xaa /* assigned global SAP for SNAP */ #define AN_SNAP_K2 0x00 #define AN_SNAP_CONTROL 0x03 /* unnumbered information format */ #define AN_SNAP_WORD0 (AN_SNAP_K1 | (AN_SNAP_K1 << 8)) #define AN_SNAP_WORD1 (AN_SNAP_K2 | (AN_SNAP_CONTROL << 8)) #define AN_SNAPHDR_LEN 0x6