/************************************************************************** ** ** $Id: pci.c,v 1.43 1996/01/27 20:14:31 wollman Exp $ ** ** General subroutines for the PCI bus. ** pci_configure () ** ** FreeBSD ** **------------------------------------------------------------------------- ** ** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved. ** ** Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions ** are met: ** 1. Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** 2. Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in the ** documentation and/or other materials provided with the distribution. ** 3. The name of the author may not be used to endorse or promote products ** derived from this software without specific prior written permission. ** ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** *************************************************************************** */ #include "pci.h" #if NPCI > 0 /*======================================================== ** ** #includes and declarations ** **======================================================== */ #include #include #include #include #include #include #include /* declaration of wakeup(), used by vm.h */ #include #include /* bootverbose */ #include #include #include #include #include /* XXX inthand2_t */ #include #include #include #define PCI_MAX_IRQ (16) /*======================================================== ** ** Structs and Functions ** **======================================================== */ struct pci_devconf { struct kern_devconf pdc_kdc; struct pci_info pdc_pi; }; struct pcicb { struct pcicb *pcicb_next; struct pcicb *pcicb_up; struct pcicb *pcicb_down; pcici_t pcicb_bridge; u_long pcicb_seen; u_char pcicb_bus; u_char pcicb_subordinate; u_char pcicb_flags; #define PCICB_ISAMEM 0x01 u_int pcicb_mfrom; u_int pcicb_mupto; u_int pcicb_mamount; u_short pcicb_pfrom; u_short pcicb_pupto; u_short pcicb_pamount; u_char pcicb_bfrom; u_char pcicb_bupto; u_long pcicb_iobase; u_long pcicb_iolimit; u_long pcicb_membase; u_long pcicb_memlimit; u_long pcicb_p_membase; u_long pcicb_p_memlimit; }; static int pci_externalize (struct kern_devconf *, struct sysctl_req *); static int pci_internalize (struct kern_devconf *, struct sysctl_req *); static void not_supported (pcici_t tag, u_long type); static void pci_bus_config (void); static int pci_bridge_config (void); static int pci_mfdev (int bus, int device); /*======================================================== ** ** Variables ** **======================================================== */ /* ** log2 of safe burst len (in words) */ unsigned pci_max_burst_len = 3; /* 2=16Byte, 3=32Byte, 4=64Byte, ... */ unsigned pci_mechanism = 0; unsigned pci_maxdevice = 0; static struct pcibus* pcibus; /*-------------------------------------------------------- ** ** Local variables. ** **-------------------------------------------------------- */ static int pci_conf_count; static int pci_info_done; static struct pcicb pcibus0 = { NULL, NULL, NULL, { 0 }, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* real allocation */ 0, 0xFFFF, /* iobase/limit */ 0x2000000, 0xFFFFFFFFu, /* nonprefetch membase/limit */ 0x2000000, 0xFFFFFFFFu /* prefetch membase/limit */ }; static struct pcicb *pcicb; /*======================================================== ** ** pci_configure () ** ** Autoconfiguration of pci devices. ** ** May be called more than once. ** Any device is attached only once. ** ** Has to take care of mirrored devices, which are ** entailed by incomplete decoding of pci address lines. ** **======================================================== */ void pci_configure() { struct pcibus **pbp = (struct pcibus**) pcibus_set.ls_items; /* ** check pci bus present */ while (!pci_maxdevice && (pcibus = *pbp++)) { (*pcibus->pb_setup)(); } if (!pci_maxdevice) return; /* ** hello world .. */ for (pcicb = &pcibus0; pcicb != NULL;) { pci_bus_config (); if (pcicb->pcicb_down) { pcicb = pcicb->pcicb_down; continue; }; while (pcicb && !pcicb->pcicb_next) pcicb = pcicb->pcicb_up; if (pcicb) pcicb = pcicb->pcicb_next; } pci_conf_count++; } /*======================================================== ** ** Subroutines for configuration. ** **======================================================== */ static void pci_register_io (struct pcicb * cb, u_int base, u_int limit) { #ifdef PCI_BRIDGE_DEBUG if (bootverbose) printf ("register_io: bus=%d base=%x limit=%x\n", cb->pcicb_bus, base, limit); #endif if (!cb->pcicb_pfrom || base < cb->pcicb_pfrom) cb->pcicb_pfrom = base; if (limit > cb->pcicb_pupto) cb->pcicb_pupto = limit; /* ** XXX should set bridge io mapping here ** but it can be mapped in 4k blocks only, ** leading to conflicts with isa/eisa .. */ } static void pci_register_memory (struct pcicb * cb, u_int base, u_int limit) { #ifdef PCI_BRIDGE_DEBUG if (bootverbose) printf ("register_mem: bus=%d base=%x limit=%x\n", cb->pcicb_bus, base, limit); #endif if (!cb->pcicb_mfrom || base < cb->pcicb_mfrom) cb->pcicb_mfrom = base; if (limit > cb->pcicb_mupto) cb->pcicb_mupto = limit; /* ** set the bridges mapping ** ** XXX should handle the 1Mb granularity. */ if (cb->pcicb_bridge.tag) { pci_conf_write(cb->pcicb_bridge, PCI_PCI_BRIDGE_MEM_REG, (cb->pcicb_memlimit & 0xffff0000) | (cb->pcicb_membase >> 16)); if (bootverbose) printf ("\t[pci%d uses memory from %x to %x]\n", cb->pcicb_bus, (unsigned) cb->pcicb_membase, (unsigned) cb->pcicb_memlimit); } } /* ** XXX This function is neither complete nor tested. ** It's only used if the bios hasn't done it's job ** of mapping the pci devices in the physical memory. */ static u_int pci_memalloc (struct pcicb * cb, u_int addr, u_int size) { u_int result = 0, limit=0, newbase=0; #ifdef PCI_BRIDGE_DEBUG if (bootverbose) printf ("memalloc: bus=%d addr=%x size=%x ..\n", cb->pcicb_bus, addr, size); #endif if (!cb) goto done; if (!cb->pcicb_membase) { printf ("memalloc: bus%d: membase not set.\n", cb->pcicb_bus); goto done; } /* ** get upper allocation limit */ limit = cb->pcicb_memlimit; if (cb->pcicb_mfrom && cb->pcicb_mfrom <= limit) limit = cb->pcicb_mfrom-1; /* ** address fixed, and impossible to allocate ? */ if (addr && addr+size-1 > limit) goto done; /* ** get possible address */ result = addr; if (!result) result = ((limit + 1) / size - 1) * size; /* ** if not local available, request from parent. */ if (result < cb->pcicb_membase) { newbase = pci_memalloc (cb->pcicb_up, result, size); if (newbase) cb->pcicb_membase = result; else result=0; } done: if (result) pci_register_memory (cb, result, result+size-1); #ifdef PCI_BRIDGE_DEBUG printf ("memalloc: bus=%d addr=%x size=%x --> %x (limit=%x).\n", cb->pcicb_bus, addr, size, result, limit); #endif return (result); } /*======================================================== ** ** pci_bus_config() ** ** Autoconfiguration of one pci bus. ** **======================================================== */ static int pci_mfdev (int bus, int device) { pcici_t tag0,tag1; int pci_id0, pci_id1; /* ** Detect a multi-function device that complies to the PCI 2.0 spec */ tag0 = pcibus->pb_tag (bus, device, 0); if (pcibus->pb_read (tag0, PCI_HEADER_MISC) & PCI_HEADER_MULTIFUNCTION) return 1; /* ** Well, as always: Theory and implementation of PCI ... ** ** If there is a valid device ID returned for function 1 AND ** the device ID of function 0 and 1 is different OR ** the first mapping register of 0 and 1 differs, ** then assume a multi-function device anyway ... ** ** Example of such a broken device: ISA and IDE chip i83371FB (Triton) */ tag1 = pcibus->pb_tag (bus, device, 1); pci_id1 = pcibus->pb_read (tag1, PCI_ID_REG); if (pci_id1 != 0xffffffff) { pci_id0 = pcibus->pb_read (tag0, PCI_ID_REG); if (pci_id0 != pci_id1) return 1; if (pcibus->pb_read (tag0, PCI_MAP_REG_START) != pcibus->pb_read (tag1, PCI_MAP_REG_START)) return 1; } return 0; } static void pci_bus_config (void) { int bus_no; u_char device; u_char reg; pcici_t tag, mtag; pcidi_t type; u_long data; int unit; u_char pciint; u_char irq; struct pci_device *dvp; struct pci_devconf *pdcp; /* ** first initialize the bridge (bus controller chip) */ bus_no = pci_bridge_config (); printf ("Probing for devices on PCI bus %d:\n", bus_no); #ifndef PCI_QUIET if (bootverbose && !pci_info_done) { pci_info_done=1; printf ("\tconfiguration mode %d allows %d devices.\n", pci_mechanism, pci_maxdevice); }; #endif for (device=0; devicepcicb_seen >> device) & 1) continue; for (func=0; func <= maxfunc; func++) { tag = pcibus->pb_tag (bus_no, device, func); type = pcibus->pb_read (tag, PCI_ID_REG); if ((!type) || (type==0xfffffffful)) continue; /* ** lookup device in ioconfiguration: */ dvpp = (struct pci_device **)pcidevice_set.ls_items; while (dvp = *dvpp++) { if (dvp->pd_probe) { if (name=(*dvp->pd_probe)(tag, type)) break; } }; /* ** check for mirrored devices. */ if (func != 0) { goto real_device; } if (device & 0x10) { mtag=pcibus->pb_tag (bus_no, (u_char)(device & ~0x10), 0); } else if (device & 0x08) { mtag=pcibus->pb_tag (bus_no, (u_char)(device & ~0x08), 0); } else goto real_device; if (type!=pcibus->pb_read (mtag, PCI_ID_REG)) goto real_device; for (reg=PCI_MAP_REG_START;regpb_read(tag,reg)!=pcibus->pb_read(mtag,reg)) goto real_device; #ifndef PCI_QUIET if (dvp==NULL) continue; if (bootverbose) printf ("%s? <%s> mirrored on pci%d:%d\n", dvp->pd_name, name, bus_no, device); #endif continue; real_device: if (bootverbose) { printf ("\tconfig header: 0x%08x 0x%08x 0x%08x 0x%08x\n", pci_conf_read (tag, 0), pci_conf_read (tag, 4), pci_conf_read (tag, 8), pci_conf_read (tag, 12)); } if (func == 0 && pci_mfdev (bus_no, device)) { maxfunc = 7; } if (dvp==NULL) { #ifndef PCI_QUIET if (pci_conf_count) continue; printf("%s%d:%d: ", pcibus->pb_name, bus_no, device); not_supported (tag, type); #endif continue; }; pcicb->pcicb_seen |= (1ul << device); /* ** Get and increment the unit. */ unit = (*dvp->pd_count)++; /* ** ignore device ? */ if (!*name) continue; /* ** Announce this device */ printf ("%s%d <%s> rev %d", dvp->pd_name, unit, name, (unsigned) pci_conf_read (tag, PCI_CLASS_REG) & 0xff); /* ** Get the int pin number (pci interrupt number a-d) ** from the pci configuration space. */ data = pcibus->pb_read (tag, PCI_INTERRUPT_REG); pciint = PCI_INTERRUPT_PIN_EXTRACT(data); if (pciint) { printf (" int %c irq ", 0x60+pciint); irq = PCI_INTERRUPT_LINE_EXTRACT(data); /* ** If it's zero, the isa irq number is unknown, ** and we cannot bind the pci interrupt. */ if (irq && (irq != 0xff)) printf ("%d", irq); else printf ("??"); }; printf (" on pci%d:%d\n", bus_no, device); /* ** Read the current mapping, ** and update the pcicb fields. */ for (reg=PCI_MAP_REG_START;regpb_read (tag, reg); if (!(map & PCI_MAP_MEMORY_ADDRESS_MASK)) continue; pcibus->pb_write (tag, reg, 0xffffffff); data = pcibus->pb_read (tag, reg); pcibus->pb_write (tag, reg, map); switch (data & 7) { default: continue; case 1: case 5: size = -(data & PCI_MAP_IO_ADDRESS_MASK); addr = map & PCI_MAP_IO_ADDRESS_MASK; pci_register_io (pcicb, addr, addr+size-1); pcicb->pcicb_pamount += size; break; case 0: case 2: case 4: size = -(data & PCI_MAP_MEMORY_ADDRESS_MASK); addr = map & PCI_MAP_MEMORY_ADDRESS_MASK; if (addr >= 0x100000) { pci_register_memory (pcicb, addr, addr+size-1); pcicb->pcicb_mamount += size; } else { pcicb->pcicb_flags |= PCICB_ISAMEM; }; break; }; if (bootverbose) printf ("\tmapreg[%02x] type=%d addr=%08x size=%04x.\n", reg, map&7, addr, size); }; /* ** Allocate a devconf structure ** We should, and eventually will, set the ** parent pointer to a pci bus devconf structure, ** and arrange to set the state field dynamically. */ pdcp = (struct pci_devconf *) malloc (sizeof (struct pci_devconf),M_DEVBUF,M_WAITOK); bzero(pdcp, sizeof(struct pci_devconf)); pdcp -> pdc_pi.pi_bus = bus_no; pdcp -> pdc_pi.pi_device = device; pdcp -> pdc_pi.pi_func = func; pdcp -> pdc_kdc.kdc_name = dvp->pd_name; pdcp -> pdc_kdc.kdc_unit = unit; pdcp -> pdc_kdc.kdc_md.mddc_devtype = MDDT_PCI; pdcp -> pdc_kdc.kdc_externalize = pci_externalize; pdcp -> pdc_kdc.kdc_internalize = pci_internalize; pdcp -> pdc_kdc.kdc_datalen = PCI_EXTERNAL_LEN; pdcp -> pdc_kdc.kdc_parentdata = &pdcp->pdc_pi; pdcp -> pdc_kdc.kdc_state = DC_UNKNOWN; pdcp -> pdc_kdc.kdc_description = name; pdcp -> pdc_kdc.kdc_shutdown = dvp->pd_shutdown; /* ** And register this device */ dev_attach (&pdcp->pdc_kdc); /* ** attach device ** may produce additional log messages, ** i.e. when installing subdevices. */ (*dvp->pd_attach) (tag, unit); /* ** Special processing of certain classes */ data = pci_conf_read(tag, PCI_CLASS_REG); switch (data & (PCI_CLASS_MASK|PCI_SUBCLASS_MASK)) { struct pcicb *this, **link; unsigned char primary, secondary, subordinate; u_int command; case PCI_CLASS_BRIDGE|PCI_SUBCLASS_BRIDGE_PCI: /* ** get current configuration of the bridge. */ data = pci_conf_read (tag, PCI_PCI_BRIDGE_BUS_REG); primary = PCI_PRIMARY_BUS_EXTRACT (data); secondary = PCI_SECONDARY_BUS_EXTRACT(data); subordinate = PCI_SUBORDINATE_BUS_EXTRACT(data); #ifndef PCI_QUIET if (bootverbose) { printf ("\tbridge from pci%d to pci%d through %d.\n", primary, secondary, subordinate); printf ("\tmapping regs: io:%08lx mem:%08lx pmem:%08lx\n", pci_conf_read (tag, PCI_PCI_BRIDGE_IO_REG), pci_conf_read (tag, PCI_PCI_BRIDGE_MEM_REG), pci_conf_read (tag, PCI_PCI_BRIDGE_PMEM_REG)); } #endif /* ** check for uninitialized bridge. */ if (secondary == 0 || secondary < primary || bus_no != primary) { printf ("\tINCORRECTLY or NEVER CONFIGURED.\n"); /* ** disable this bridge */ pcibus->pb_write (tag, PCI_COMMAND_STATUS_REG, 0xffff0000); secondary = 0; subordinate = 0; }; /* ** allocate bus descriptor for bus behind the bridge */ link = &pcicb->pcicb_down; while (*link) link = &(*link)->pcicb_next; this = malloc (sizeof (*this), M_DEVBUF, M_WAITOK); /* ** Initialize this descriptor so far. ** (the initialization is completed just before ** scanning the bus behind the bridge. */ bzero (this, sizeof(*this)); this->pcicb_up = pcicb; this->pcicb_bridge = tag; this->pcicb_bus = secondary; this->pcicb_subordinate = subordinate; command = pci_conf_read(tag,PCI_COMMAND_STATUS_REG); if (command & PCI_COMMAND_IO_ENABLE){ /* ** Bridge was configured by the bios. ** Read out the mapped io region. */ u_int reg, data, mask; reg = pci_conf_read (tag, PCI_PCI_BRIDGE_IO_REG); pci_conf_write(tag, PCI_PCI_BRIDGE_IO_REG, 0xFFFF); data = pci_conf_read (tag, PCI_PCI_BRIDGE_IO_REG); pci_conf_write(tag, PCI_PCI_BRIDGE_IO_REG, reg & 0xffff); mask = (0xFF00 ^ (data & 0xFF00)) | 0xFF; this->pcicb_iobase = PCI_PPB_IOBASE_EXTRACT (reg); this->pcicb_iolimit = PCI_PPB_IOLIMIT_EXTRACT(reg) | mask; /* ** Note the used io space. */ pci_register_io (pcicb, this->pcicb_iobase, this->pcicb_iolimit); }; if (command & PCI_COMMAND_MEM_ENABLE) { /* ** Bridge was configured by the bios. ** Read out the mapped memory regions. */ u_int reg, data, mask; /* ** non prefetchable memory */ reg = pci_conf_read (tag, PCI_PCI_BRIDGE_MEM_REG); pci_conf_write(tag, PCI_PCI_BRIDGE_MEM_REG, 0xFFFFFFFF); data = pci_conf_read (tag, PCI_PCI_BRIDGE_MEM_REG); pci_conf_write(tag, PCI_PCI_BRIDGE_MEM_REG, reg); mask = 0xFFFFFFFF ^ (data & 0xFFFF0000); this->pcicb_membase = PCI_PPB_MEMBASE_EXTRACT (reg); this->pcicb_memlimit = PCI_PPB_MEMLIMIT_EXTRACT(reg) | mask; /* ** Register used memory space. */ pci_register_memory (pcicb, this->pcicb_membase, this->pcicb_memlimit); /* ** prefetchable memory */ reg = pci_conf_read (tag, PCI_PCI_BRIDGE_PMEM_REG); pci_conf_write(tag, PCI_PCI_BRIDGE_PMEM_REG, 0xFFFFFFFF); data = pci_conf_read (tag, PCI_PCI_BRIDGE_PMEM_REG); pci_conf_write(tag, PCI_PCI_BRIDGE_PMEM_REG, reg); mask = 0xFFFFFFFF ^ (data & 0xFFFF0000); this->pcicb_p_membase= PCI_PPB_MEMBASE_EXTRACT (reg); this->pcicb_p_memlimit= PCI_PPB_MEMLIMIT_EXTRACT(reg) | mask; /* ** Register used memory space. */ pci_register_memory (pcicb, this->pcicb_p_membase, this->pcicb_p_memlimit); } /* ** Link it in chain. */ *link=this; /* ** Update mapping info of parent bus. */ if (!pcicb->pcicb_bfrom||secondary< pcicb->pcicb_bfrom) pcicb->pcicb_bfrom = secondary; if (subordinate > pcicb->pcicb_bupto) pcicb->pcicb_bupto = subordinate; break; } } } #ifndef PCI_QUIET if (bootverbose) { if (pcicb->pcicb_mamount) printf ("%s%d: uses %d bytes of memory from %x upto %x.\n", pcibus->pb_name, bus_no, pcicb->pcicb_mamount, pcicb->pcicb_mfrom, pcicb->pcicb_mupto); if (pcicb->pcicb_pamount) printf ("%s%d: uses %d bytes of I/O space from %x upto %x.\n", pcibus->pb_name, bus_no, pcicb->pcicb_pamount, pcicb->pcicb_pfrom, pcicb->pcicb_pupto); if (pcicb->pcicb_bfrom) printf ("%s%d: subordinate busses from %x upto %x.\n", pcibus->pb_name, bus_no, pcicb->pcicb_bfrom, pcicb->pcicb_bupto); } #endif } /*======================================================== ** ** pci_bridge_config() ** ** Configuration of a pci bridge. ** **======================================================== */ static int pci_bridge_config (void) { pcici_t tag; struct pcicb* parent; tag = pcicb->pcicb_bridge; if (tag.tag) { if (!pcicb->pcicb_bus) { u_int data; /* ** Get the lowest available bus number. */ pcicb->pcicb_bus = ++pcibus0.pcicb_subordinate; /* ** and configure the bridge */ data = pci_conf_read (tag, PCI_PCI_BRIDGE_BUS_REG); data = PCI_PRIMARY_BUS_INSERT(data, pcicb->pcicb_up->pcicb_bus); data = PCI_SECONDARY_BUS_INSERT(data, pcicb->pcicb_bus); data = PCI_SUBORDINATE_BUS_INSERT(data, pcicb->pcicb_bus); pci_conf_write (tag, PCI_PCI_BRIDGE_BUS_REG, data); /* ** Propagate the new upper bus number limit. */ for (parent = pcicb->pcicb_up; parent != NULL; parent = parent->pcicb_up) { if (parent->pcicb_subordinate >= pcicb->pcicb_bus) continue; parent->pcicb_subordinate = pcicb->pcicb_bus; if (!parent->pcicb_bridge.tag) continue; data = pci_conf_read (parent->pcicb_bridge, PCI_PCI_BRIDGE_BUS_REG); data = PCI_SUBORDINATE_BUS_INSERT (data, pcicb->pcicb_bus); pci_conf_write (parent->pcicb_bridge, PCI_PCI_BRIDGE_BUS_REG, data); } } if (!pcicb->pcicb_membase) { u_int size = 0x100000; pcicb->pcicb_membase = pci_memalloc (pcicb->pcicb_up, 0, size); if (pcicb->pcicb_membase) pcicb->pcicb_memlimit = pcicb->pcicb_membase+size-1; } } return pcicb->pcicb_bus; } /*----------------------------------------------------------------- ** ** The following functions are provided for the device driver ** to read/write the configuration space. ** ** pci_conf_read(): ** Read a long word from the pci configuration space. ** Requires a tag (from pcitag) and the register ** number (should be a long word alligned one). ** ** pci_conf_write(): ** Writes a long word to the pci configuration space. ** Requires a tag (from pcitag), the register number ** (should be a long word alligned one), and a value. ** **----------------------------------------------------------------- */ u_long pci_conf_read (pcici_t tag, u_long reg) { return (pcibus->pb_read (tag, reg)); } void pci_conf_write (pcici_t tag, u_long reg, u_long data) { pcibus->pb_write (tag, reg, data); } /*----------------------------------------------------------------------- ** ** Map device into port space. ** ** Actually the device should have been mapped by the bios. ** This function only reads and verifies the value. ** ** PCI-Specification: 6.2.5.1: address maps ** **----------------------------------------------------------------------- */ int pci_map_port (pcici_t tag, u_long reg, u_short* pa) { unsigned data, ioaddr, iosize; struct pcicb *link = pcicb; /* ** sanity check */ if (reg < PCI_MAP_REG_START || reg >= PCI_MAP_REG_END || (reg & 3)) { printf ("pci_map_port failed: bad register=0x%x\n", (unsigned)reg); return (0); }; /*if (pcicb->pcicb_flags & PCICB_NOIOSET) { printf ("pci_map_port failed: pci%d has not been configured for I/O access\n", pcicb->pcicb_bus); return (0); }*/ /* ** get size and type of port ** ** type is in the lowest two bits. ** If device requires 2^n bytes, the next ** n-2 bits are hardwired as 0. */ ioaddr = pcibus->pb_read (tag, reg) & PCI_MAP_IO_ADDRESS_MASK; if (!ioaddr || ioaddr > 0xfffful) { printf ("pci_map_port failed: not configured by bios.\n"); return (0); }; pcibus->pb_write (tag, reg, 0xfffffffful); data = pcibus->pb_read (tag, reg); pcibus->pb_write (tag, reg, ioaddr); if ((data & 0x03) != PCI_MAP_IO) { printf ("pci_map_port failed: bad port type=0x%x\n", (unsigned) data); return (0); }; iosize = -(data & PCI_MAP_IO_ADDRESS_MASK); if (ioaddr < pcicb->pcicb_iobase || ioaddr + iosize -1 > pcicb->pcicb_iolimit) { printf ("pci_map_port failed: device's iorange 0x%x-0x%x " "is incompatible with its bridge's range 0x%x-0x%x\n", (unsigned) ioaddr, (unsigned) ioaddr + iosize - 1, (unsigned) pcicb->pcicb_iobase, (unsigned) pcicb->pcicb_iolimit); return (0); } #ifndef PCI_QUIET if (bootverbose) printf ("\treg%d: ioaddr=0x%x size=0x%x\n", (unsigned) reg, (unsigned) ioaddr, (unsigned) iosize); #endif /* ** set the configuration register of and ** return the address to the driver. ** Make sure to enable each upstream bridge ** so I/O and DMA can go all the way. */ for (;;) { data = pcibus->pb_read (tag, PCI_COMMAND_STATUS_REG) & 0xffff; data |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MASTER_ENABLE; (void) pcibus->pb_write(tag, PCI_COMMAND_STATUS_REG, data); if ((link = link->pcicb_up) == NULL) break; tag = link->pcicb_bridge; } *pa = ioaddr; return (1); } /*----------------------------------------------------------------------- ** ** Map device into virtual and physical space ** ** Actually the device should have been mapped by the bios. ** This function only reads and verifies the value. ** ** PCI-Specification: 6.2.5.1: address maps ** **----------------------------------------------------------------------- */ int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa) { struct pcicb *link = pcicb; unsigned data ,paddr; vm_size_t psize, poffs; vm_offset_t vaddr; /* ** sanity check */ if (reg < PCI_MAP_REG_START || reg >= PCI_MAP_REG_END || (reg & 3)) { printf ("pci_map_mem failed: bad register=0x%x\n", (unsigned)reg); return (0); }; /* ** save old mapping, get size and type of memory ** ** type is in the lowest four bits. ** If device requires 2^n bytes, the next ** n-4 bits are read as 0. */ paddr = pcibus->pb_read (tag, reg) & PCI_MAP_MEMORY_ADDRESS_MASK; pcibus->pb_write (tag, reg, 0xfffffffful); data = pcibus->pb_read (tag, reg); pcibus->pb_write (tag, reg, paddr); /* ** check the type */ if ((data & PCI_MAP_MEMORY_TYPE_MASK) != PCI_MAP_MEMORY_TYPE_32BIT) { printf ("pci_map_mem failed: bad memory type=0x%x\n", (unsigned) data); return (0); }; /* ** get the size. */ psize = -(data & PCI_MAP_MEMORY_ADDRESS_MASK); if (!paddr || paddr == PCI_MAP_MEMORY_ADDRESS_MASK) { paddr = pci_memalloc (pcicb, 0, psize); if (!paddr) { printf ("pci_map_mem: not configured by bios.\n"); return (0); }; pci_register_memory (pcicb, paddr, paddr+psize-1); }; if (paddr < pcicb->pcicb_membase || paddr + psize - 1 > pcicb->pcicb_memlimit) { printf ("pci_map_mem failed: device's memrange 0x%x-0x%x is " "incompatible with its bridge's memrange 0x%x-0x%x\n", (unsigned) paddr, (unsigned) (paddr + psize - 1), (unsigned) pcicb->pcicb_membase, (unsigned) pcicb->pcicb_memlimit); /* return (0);*/ /* ACHTUNG: Ist der Code richtig, wenn eine PCI-PCI-Bridge fuer * die PCI-Slots verwendet wird, aber die Onboard-Devices direkt * an der CPU-PCI-Bridge haengen (Siehe Compaq Prolinea Problem) ??? */ } pcibus->pb_write (tag, reg, paddr); /* ** Truncate paddr to page boundary. ** (Or does pmap_mapdev the job?) */ poffs = paddr - trunc_page (paddr); vaddr = (vm_offset_t) pmap_mapdev (paddr-poffs, psize+poffs); if (!vaddr) return (0); vaddr += poffs; #ifndef PCI_QUIET /* ** display values. */ if (bootverbose) printf ("\treg%d: virtual=0x%lx physical=0x%lx size=0x%lx\n", (unsigned) reg, (u_long)vaddr, (u_long)paddr, (u_long)psize); #endif /* ** set the configuration register and ** return the address to the driver ** Make sure to enable each upstream bridge ** so memory and DMA can go all the way. */ for (;;) { data = pcibus->pb_read (tag, PCI_COMMAND_STATUS_REG) & 0xffff; data |= PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE; (void) pcibus->pb_write(tag, PCI_COMMAND_STATUS_REG, data); if ((link = link->pcicb_up) == NULL) break; tag = link->pcicb_bridge; } *va = vaddr; *pa = paddr; return (1); } /*------------------------------------------------------------ ** ** Interface functions for the devconf module. ** **------------------------------------------------------------ */ static int pci_externalize (struct kern_devconf *kdcp, struct sysctl_req *req) { struct pci_externalize_buffer buffer; struct pci_info * pip = kdcp->kdc_parentdata; pcici_t tag; int i; tag = pcibus->pb_tag (pip->pi_bus, pip->pi_device, pip->pi_func); buffer.peb_pci_info = *pip; for (i=0; ipb_read (tag, i*4); }; return SYSCTL_OUT(req, &buffer, sizeof buffer); } static int pci_internalize (struct kern_devconf *kdcp, struct sysctl_req *re) { return EOPNOTSUPP; } /*----------------------------------------------------------------------- ** ** Pci meta interrupt handler ** ** This handler assumes level triggered interrupts. ** It's possible to build a kernel which handles shared ** edge triggered interrupts by the options "PCI_EDGE_INT". ** But there is a performance penalty. ** ** (Of course you can delete the #ifdef PCI_EDGE_INT bracketed ** code at all :-) :-) :-) ** **----------------------------------------------------------------------- */ static struct pci_int_desc* pci_int_desc [PCI_MAX_IRQ]; #ifndef NO_SHARED_IRQ static inline unsigned splq (unsigned mask) { unsigned temp=cpl; cpl |= mask; return temp; } static void pci_int (int irq) { struct pci_int_desc * p; int s; if (irq<0 || irq >= PCI_MAX_IRQ) { printf ("pci_int: irq %d out of range, ignored\n", irq); return; }; for (p = pci_int_desc[irq]; p!=NULL; p=p->pcid_next) { s = splq (*p->pcid_maskptr); (*p->pcid_handler) (p->pcid_argument); p-> pcid_tally++; splx (s); #if 0 if (p->pcid_tally<20) printf ("PCI_INT: irq=%d h=%p cpl o=%x n=%x val=%d\n", irq, p->pcid_handler, s, cpl, c); #endif }; } #endif /*----------------------------------------------------------------------- ** ** Auxiliary function for interrupt (un)mapping. ** **----------------------------------------------------------------------- */ static u_int getirq (pcici_t tag) { u_int irq; irq = PCI_INTERRUPT_LINE_EXTRACT( pcibus->pb_read (tag, PCI_INTERRUPT_REG)); if (irq <= 0) { printf ("\tint line register not set by bios\n"); return (0); } if (irq >= pcibus->pb_maxirq || irq >= PCI_MAX_IRQ) { printf ("\tirq %d invalid.\n", irq); return (0); } return (irq); } static struct pci_int_desc ** getintdescbytag (u_int irq, pcici_t tag) { struct pci_int_desc *p, **pp; pp=&pci_int_desc[irq]; while (((p=*pp)) && !sametag(p->pcid_tag,tag)) pp=&p->pcid_next; if (!p) return (NULL); return (pp); } static struct pci_int_desc * getintdescbymptr (u_int irq, unsigned * mptr) { struct pci_int_desc *p; for (p=pci_int_desc[irq];p;p=p->pcid_next) if (p->pcid_maskptr == mptr) break; return (p); } /*----------------------------------------------------------------------- ** ** Map pci interrupt. ** **----------------------------------------------------------------------- */ static unsigned pci_mask0 = 0; int pci_map_int (pcici_t tag, pci_inthand_t *func, void *arg, unsigned *maskptr) { u_int irq; int result, oldspl; unsigned mask; struct pci_int_desc *tail, *mdp=NULL, *new=NULL; /* ** Get irq line from configuration space, ** and check for consistency. */ irq = getirq (tag); if (irq >= PCI_MAX_IRQ) { printf ("\tillegal irq %d.\n", irq); return (0); }; mask= 1ul << irq; /* ** disable this interrupt. */ oldspl = splq (mask); /* ** If handler for this tag already installed, ** remove it first. */ if (getintdescbytag (irq, tag) != NULL) pci_unmap_int (tag); /* ** If this irq not yet included in the mask, include it. */ mdp = getintdescbymptr (irq, maskptr); if (!mdp) { result = pcibus->pb_imaskinc (irq, maskptr); if (result) goto conflict; }; /* ** Allocate descriptor and initialize it. */ tail = pci_int_desc[irq]; new = malloc (sizeof (*new), M_DEVBUF, M_WAITOK); bzero (new, sizeof (*new)); new->pcid_next = tail; new->pcid_tag = tag; new->pcid_handler = func; new->pcid_argument = arg; new->pcid_maskptr = maskptr; new->pcid_tally = 0; new->pcid_mask = mask; /* ** If first handler: install it. ** If second handler: install shared-int-handler. */ if (!tail) { /* ** first handler for this irq. */ result = pcibus->pb_iattach /* * XXX if we get here, then `func' must be pci_int * so the bogus casts are almost OK since they just * undo the bogus casts that were needed to pass * pci_int and its arg to pci_map_int(). */ (irq, (inthand2_t *) func, (int) arg, maskptr); if (result) goto conflict; #ifdef NO_SHARED_IRQ } else goto conflict; #else } else if (!tail->pcid_next) { /* ** Second handler for this irq. */ if (bootverbose) printf ("\tusing shared irq %d.\n", irq); /* ** replace old handler by shared-int-handler. */ result = pcibus->pb_idetach (irq, (inthand2_t *) tail->pcid_handler); if (result) printf ("\tCANNOT DETACH INT HANDLER.\n"); result = pcibus->pb_iattach (irq, pci_int, irq, &pci_mask0); if (result) { printf ("\tCANNOT ATTACH SHARED INT HANDLER.\n"); goto fail; }; } #endif /* ** Link new descriptor, reenable ints and done. */ pci_int_desc[irq] = new; splx (oldspl); return (1); /* ** Handle some problems. */ conflict: printf ("\tirq %d already in use.\n", irq); fail: /* ** If descriptor allocated, free it. ** If included in mask, remove it. */ if (new) free(new, M_DEVBUF); if (!mdp) (void) pcibus->pb_imaskexc (irq, maskptr); splx (oldspl); return (0); } /*----------------------------------------------------------------------- ** ** Unmap pci interrupt. ** **----------------------------------------------------------------------- */ int pci_unmap_int (pcici_t tag) { int result, oldspl; struct pci_int_desc *this, **hook, *tail; unsigned irq; /* ** Get irq line from configuration space, ** and check for consistency. */ irq = getirq (tag); if (irq >= PCI_MAX_IRQ) { printf ("\tillegal irq %d.\n", irq); return (0); }; /* ** Search and unlink interrupt descriptor. */ hook = getintdescbytag (irq, tag); if (hook == NULL) { printf ("\tno irq %d handler for pci %x\n", irq, tag.tag); return (0); }; this = *hook; *hook= this->pcid_next; /* ** Message */ printf ("\tirq %d handler %p(%p) unmapped for pci %x after %d ints.\n", irq, this->pcid_handler, this->pcid_argument, this->pcid_tag.tag, this->pcid_tally); /* ** If this irq no longer included in the mask, remove it. */ if (!getintdescbymptr (irq, this->pcid_maskptr)) (void) pcibus->pb_imaskexc (irq, this->pcid_maskptr); tail = pci_int_desc[irq]; if (tail == NULL) { /* ** Remove the old handler. */ result = pcibus->pb_idetach (irq, (inthand2_t *) this->pcid_handler); if (result) printf ("\tirq %d: cannot remove handler.\n", irq); } else if (tail->pcid_next == NULL) { /* ** Remove the shared int handler. ** Install the last remaining handler. */ oldspl = splq (1ul << irq); result = pcibus->pb_idetach (irq, pci_int); if (result) printf ("\tirq %d: cannot remove handler.\n", irq); result = pcibus->pb_iattach (irq, (inthand2_t *) tail->pcid_handler, (int) tail->pcid_argument, tail->pcid_maskptr); if (result) printf ("\tirq %d: cannot install handler.\n", irq); splx (oldspl); }; free (this, M_DEVBUF); return (1); } /*----------------------------------------------------------- ** ** Display of unknown devices. ** **----------------------------------------------------------- */ struct vt { u_short ident; char* name; }; static struct vt VendorTable[] = { {0x0e11, "Compaq"}, {0x1000, "NCR/Symbios"}, {0x1002, "ATI Technologies Inc."}, {0x1004, "VLSI"}, {0x100B, "National Semiconductor"}, {0x100E, "Weitek"}, {0x1011, "Digital Equipment Corporation"}, {0x1013, "Cirrus Logic"}, {0x101A, "NCR"}, {0x1022, "AMD"}, {0x102B, "Matrox"}, {0x102C, "Chips & Technologies"}, {0x1039, "Silicon Integrated Systems"}, {0x1042, "SMC"}, {0x1044, "DPT"}, {0x1045, "OPTI"}, {0x104B, "Bus Logic"}, {0x1060, "UMC"}, {0x1080, "Contaq"}, {0x1095, "CMD"}, {0x10b9, "ACER Labs"}, {0x1106, "VIA Technologies"}, {0x5333, "S3 Inc."}, {0x8086, "Intel Corporation"}, {0x9004, "Adaptec"}, {0,0} }; typedef struct { const char subclass; const char *name; } subclass_name; /* 0x00 prehistoric subclasses */ static const subclass_name old_subclasses[] = { { 0x00, "misc" }, { 0x01, "vga" }, { 0x00, NULL } }; /* 0x01 mass storage subclasses */ static const subclass_name storage_subclasses[] = { { 0x00, "scsi" }, { 0x01, "ide" }, { 0x02, "floppy"}, { 0x03, "ipi" }, { 0x80, "misc" }, { 0x00, NULL } }; /* 0x02 network subclasses */ static const subclass_name network_subclasses[] = { { 0x00, "ethernet" }, { 0x01, "tokenring" }, { 0x02, "fddi" }, { 0x80, "misc" }, { 0x00, NULL } }; /* 0x03 display subclasses */ static const subclass_name display_subclasses[] = { { 0x00, "vga" }, { 0x01, "xga" }, { 0x80, "misc" }, { 0x00, NULL } }; /* 0x04 multimedia subclasses */ static const subclass_name multimedia_subclasses[] = { { 0x00, "video" }, { 0x01, "audio" }, { 0x80, "misc" }, { 0x00, NULL } }; /* 0x05 memory subclasses */ static const subclass_name memory_subclasses[] = { { 0x00, "ram" }, { 0x01, "flash" }, { 0x80, "misc" }, { 0x00, NULL } }; /* 0x06 bridge subclasses */ static const subclass_name bridge_subclasses[] = { { 0x00, "host" }, { 0x01, "isa" }, { 0x02, "eisa" }, { 0x03, "mc" }, { 0x04, "pci" }, { 0x05, "pcmcia"}, { 0x80, "misc" }, { 0x00, NULL } }; static const subclass_name *const subclasses[] = { old_subclasses, storage_subclasses, network_subclasses, display_subclasses, multimedia_subclasses, memory_subclasses, bridge_subclasses, }; static const char *const majclasses[] = { "old", "storage", "network", "display", "multimedia", "memory", "bridge" }; void not_supported (pcici_t tag, u_long type) { u_char reg; u_long data; struct vt * vp; /* ** lookup the names. */ for (vp=VendorTable; vp->ident; vp++) if (vp->ident == (type & 0xffff)) break; /* ** and display them. */ if (vp->ident) printf (vp->name); else printf ("vendor=0x%04lx", type & 0xffff); printf (", device=0x%04lx", type >> 16); data = (pcibus->pb_read(tag, PCI_CLASS_REG) >> 24) & 0xff; if (data < sizeof(majclasses) / sizeof(majclasses[0])) printf(", class=%s", majclasses[data]); if (data < sizeof(subclasses) / sizeof(subclasses[0])) { const subclass_name *p = subclasses[data]; data = (pcibus->pb_read(tag, PCI_CLASS_REG) >> 16) & 0xff; while (p->name && (p->subclass != data)) p++; if (p->name) { printf(" (%s)", p->name); } else { printf(" (unknown subclass 0x%02lx)", data); } } printf (" [no driver assigned]\n"); if (bootverbose) { for (reg=PCI_MAP_REG_START; regpb_read (tag, reg); if ((data&~7)==0) continue; switch (data&7) { case 1: case 5: printf (" map(%x): io(%lx)\n", reg, data & ~3); break; case 0: printf (" map(%x): mem32(%lx)\n", reg, data & ~7); break; case 2: printf (" map(%x): mem20(%lx)\n", reg, data & ~7); break; case 4: printf (" map(%x): mem64(%lx)\n", reg, data & ~7); break; } } } } #endif /* NPCI */