/*- * Copyright (c) 1997, 1998 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * RealTek 8129/8139 PCI NIC driver * * Supports several extremely cheap PCI 10/100 adapters based on * the RealTek chipset. Datasheets can be obtained from * www.realtek.com.tw. * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is * probably the worst PCI ethernet controller ever made, with the possible * exception of the FEAST chip made by SMC. The 8139 supports bus-master * DMA, but it has a terrible interface that nullifies any performance * gains that bus-master DMA usually offers. * * For transmission, the chip offers a series of four TX descriptor * registers. Each transmit frame must be in a contiguous buffer, aligned * on a longword (32-bit) boundary. This means we almost always have to * do mbuf copies in order to transmit a frame, except in the unlikely * case where a) the packet fits into a single mbuf, and b) the packet * is 32-bit aligned within the mbuf's data area. The presence of only * four descriptor registers means that we can never have more than four * packets queued for transmission at any one time. * * Reception is not much better. The driver has to allocate a single large * buffer area (up to 64K in size) into which the chip will DMA received * frames. Because we don't know where within this region received packets * will begin or end, we have no choice but to copy data from the buffer * area into mbufs in order to pass the packets up to the higher protocol * levels. * * It's impossible given this rotten design to really achieve decent * performance at 100Mbps, unless you happen to have a 400Mhz PII or * some equally overmuscled CPU to drive it. * * On the bright side, the 8139 does have a built-in PHY, although * rather than using an MDIO serial interface like most other NICs, the * PHY registers are directly accessible through the 8139's register * space. The 8139 supports autonegotiation, as well as a 64-bit multicast * filter. * * The 8129 chip is an older version of the 8139 that uses an external PHY * chip. The 8129 has a serial MDIO interface for accessing the MII where * the 8139 lets you directly access the on-board PHY registers. We need * to select which interface to use depending on the chip type. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include MODULE_DEPEND(rl, pci, 1, 1, 1); MODULE_DEPEND(rl, ether, 1, 1, 1); MODULE_DEPEND(rl, miibus, 1, 1, 1); /* "controller miibus0" required. See GENERIC if you get errors here. */ #include "miibus_if.h" /* * Default to using PIO access for this driver. On SMP systems, * there appear to be problems with memory mapped mode: it looks like * doing too many memory mapped access back to back in rapid succession * can hang the bus. I'm inclined to blame this on crummy design/construction * on the part of RealTek. Memory mapped mode does appear to work on * uniprocessor systems though. */ #define RL_USEIOSPACE #include /* * Various supported device vendors/types and their names. */ static struct rl_type rl_devs[] = { { RT_VENDORID, RT_DEVICEID_8129, RL_8129, "RealTek 8129 10/100BaseTX" }, { RT_VENDORID, RT_DEVICEID_8139, RL_8139, "RealTek 8139 10/100BaseTX" }, { RT_VENDORID, RT_DEVICEID_8138, RL_8139, "RealTek 8139 10/100BaseTX CardBus" }, { RT_VENDORID, RT_DEVICEID_8100, RL_8139, "RealTek 8100 10/100BaseTX" }, { ACCTON_VENDORID, ACCTON_DEVICEID_5030, RL_8139, "Accton MPX 5030/5038 10/100BaseTX" }, { DELTA_VENDORID, DELTA_DEVICEID_8139, RL_8139, "Delta Electronics 8139 10/100BaseTX" }, { ADDTRON_VENDORID, ADDTRON_DEVICEID_8139, RL_8139, "Addtron Technolgy 8139 10/100BaseTX" }, { DLINK_VENDORID, DLINK_DEVICEID_530TXPLUS, RL_8139, "D-Link DFE-530TX+ 10/100BaseTX" }, { DLINK_VENDORID, DLINK_DEVICEID_690TXD, RL_8139, "D-Link DFE-690TXD 10/100BaseTX" }, { NORTEL_VENDORID, ACCTON_DEVICEID_5030, RL_8139, "Nortel Networks 10/100BaseTX" }, { COREGA_VENDORID, COREGA_DEVICEID_FETHERCBTXD, RL_8139, "Corega FEther CB-TXD" }, { COREGA_VENDORID, COREGA_DEVICEID_FETHERIICBTXD, RL_8139, "Corega FEtherII CB-TXD" }, { PEPPERCON_VENDORID, PEPPERCON_DEVICEID_ROLF, RL_8139, "Peppercon AG ROL-F" }, { PLANEX_VENDORID, PLANEX_DEVICEID_FNW3800TX, RL_8139, "Planex FNW-3800-TX" }, { CP_VENDORID, RT_DEVICEID_8139, RL_8139, "Compaq HNE-300" }, { LEVEL1_VENDORID, LEVEL1_DEVICEID_FPC0106TX, RL_8139, "LevelOne FPC-0106TX" }, { EDIMAX_VENDORID, EDIMAX_DEVICEID_EP4103DL, RL_8139, "Edimax EP-4103DL CardBus" }, { 0, 0, 0, NULL } }; static int rl_attach(device_t); static int rl_detach(device_t); static void rl_dma_map_rxbuf(void *, bus_dma_segment_t *, int, int); static void rl_dma_map_txbuf(void *, bus_dma_segment_t *, int, int); static void rl_eeprom_putbyte(struct rl_softc *, int); static void rl_eeprom_getword(struct rl_softc *, int, uint16_t *); static int rl_encap(struct rl_softc *, struct mbuf * ); static int rl_list_tx_init(struct rl_softc *); static int rl_ifmedia_upd(struct ifnet *); static void rl_ifmedia_sts(struct ifnet *, struct ifmediareq *); static int rl_ioctl(struct ifnet *, u_long, caddr_t); static void rl_intr(void *); static void rl_init(void *); static void rl_init_locked(struct rl_softc *sc); static void rl_mii_send(struct rl_softc *, uint32_t, int); static void rl_mii_sync(struct rl_softc *); static int rl_mii_readreg(struct rl_softc *, struct rl_mii_frame *); static int rl_mii_writereg(struct rl_softc *, struct rl_mii_frame *); static int rl_miibus_readreg(device_t, int, int); static void rl_miibus_statchg(device_t); static int rl_miibus_writereg(device_t, int, int, int); #ifdef DEVICE_POLLING static void rl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); static void rl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count); #endif static int rl_probe(device_t); static void rl_read_eeprom(struct rl_softc *, uint8_t *, int, int, int); static void rl_reset(struct rl_softc *); static int rl_resume(device_t); static void rl_rxeof(struct rl_softc *); static void rl_setmulti(struct rl_softc *); static void rl_shutdown(device_t); static void rl_start(struct ifnet *); static void rl_start_locked(struct ifnet *); static void rl_stop(struct rl_softc *); static int rl_suspend(device_t); static void rl_tick(void *); static void rl_txeof(struct rl_softc *); static void rl_watchdog(struct ifnet *); #ifdef RL_USEIOSPACE #define RL_RES SYS_RES_IOPORT #define RL_RID RL_PCI_LOIO #else #define RL_RES SYS_RES_MEMORY #define RL_RID RL_PCI_LOMEM #endif static device_method_t rl_methods[] = { /* Device interface */ DEVMETHOD(device_probe, rl_probe), DEVMETHOD(device_attach, rl_attach), DEVMETHOD(device_detach, rl_detach), DEVMETHOD(device_suspend, rl_suspend), DEVMETHOD(device_resume, rl_resume), DEVMETHOD(device_shutdown, rl_shutdown), /* bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), /* MII interface */ DEVMETHOD(miibus_readreg, rl_miibus_readreg), DEVMETHOD(miibus_writereg, rl_miibus_writereg), DEVMETHOD(miibus_statchg, rl_miibus_statchg), { 0, 0 } }; static driver_t rl_driver = { "rl", rl_methods, sizeof(struct rl_softc) }; static devclass_t rl_devclass; DRIVER_MODULE(rl, pci, rl_driver, rl_devclass, 0, 0); DRIVER_MODULE(rl, cardbus, rl_driver, rl_devclass, 0, 0); DRIVER_MODULE(miibus, rl, miibus_driver, miibus_devclass, 0, 0); #define EE_SET(x) \ CSR_WRITE_1(sc, RL_EECMD, \ CSR_READ_1(sc, RL_EECMD) | x) #define EE_CLR(x) \ CSR_WRITE_1(sc, RL_EECMD, \ CSR_READ_1(sc, RL_EECMD) & ~x) static void rl_dma_map_rxbuf(void *arg, bus_dma_segment_t *segs, int nseg, int error) { struct rl_softc *sc = arg; CSR_WRITE_4(sc, RL_RXADDR, segs->ds_addr & 0xFFFFFFFF); } static void rl_dma_map_txbuf(void *arg, bus_dma_segment_t *segs, int nseg, int error) { struct rl_softc *sc = arg; CSR_WRITE_4(sc, RL_CUR_TXADDR(sc), segs->ds_addr & 0xFFFFFFFF); } /* * Send a read command and address to the EEPROM, check for ACK. */ static void rl_eeprom_putbyte(struct rl_softc *sc, int addr) { register int d, i; d = addr | sc->rl_eecmd_read; /* * Feed in each bit and strobe the clock. */ for (i = 0x400; i; i >>= 1) { if (d & i) { EE_SET(RL_EE_DATAIN); } else { EE_CLR(RL_EE_DATAIN); } DELAY(100); EE_SET(RL_EE_CLK); DELAY(150); EE_CLR(RL_EE_CLK); DELAY(100); } } /* * Read a word of data stored in the EEPROM at address 'addr.' */ static void rl_eeprom_getword(struct rl_softc *sc, int addr, uint16_t *dest) { register int i; uint16_t word = 0; /* Enter EEPROM access mode. */ CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); /* * Send address of word we want to read. */ rl_eeprom_putbyte(sc, addr); CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); /* * Start reading bits from EEPROM. */ for (i = 0x8000; i; i >>= 1) { EE_SET(RL_EE_CLK); DELAY(100); if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT) word |= i; EE_CLR(RL_EE_CLK); DELAY(100); } /* Turn off EEPROM access mode. */ CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); *dest = word; } /* * Read a sequence of words from the EEPROM. */ static void rl_read_eeprom(struct rl_softc *sc, uint8_t *dest, int off, int cnt, int swap) { int i; uint16_t word = 0, *ptr; for (i = 0; i < cnt; i++) { rl_eeprom_getword(sc, off + i, &word); ptr = (uint16_t *)(dest + (i * 2)); if (swap) *ptr = ntohs(word); else *ptr = word; } } /* * MII access routines are provided for the 8129, which * doesn't have a built-in PHY. For the 8139, we fake things * up by diverting rl_phy_readreg()/rl_phy_writereg() to the * direct access PHY registers. */ #define MII_SET(x) \ CSR_WRITE_1(sc, RL_MII, \ CSR_READ_1(sc, RL_MII) | (x)) #define MII_CLR(x) \ CSR_WRITE_1(sc, RL_MII, \ CSR_READ_1(sc, RL_MII) & ~(x)) /* * Sync the PHYs by setting data bit and strobing the clock 32 times. */ static void rl_mii_sync(struct rl_softc *sc) { register int i; MII_SET(RL_MII_DIR|RL_MII_DATAOUT); for (i = 0; i < 32; i++) { MII_SET(RL_MII_CLK); DELAY(1); MII_CLR(RL_MII_CLK); DELAY(1); } } /* * Clock a series of bits through the MII. */ static void rl_mii_send(struct rl_softc *sc, uint32_t bits, int cnt) { int i; MII_CLR(RL_MII_CLK); for (i = (0x1 << (cnt - 1)); i; i >>= 1) { if (bits & i) { MII_SET(RL_MII_DATAOUT); } else { MII_CLR(RL_MII_DATAOUT); } DELAY(1); MII_CLR(RL_MII_CLK); DELAY(1); MII_SET(RL_MII_CLK); } } /* * Read an PHY register through the MII. */ static int rl_mii_readreg(struct rl_softc *sc, struct rl_mii_frame *frame) { int i, ack; RL_LOCK(sc); /* Set up frame for RX. */ frame->mii_stdelim = RL_MII_STARTDELIM; frame->mii_opcode = RL_MII_READOP; frame->mii_turnaround = 0; frame->mii_data = 0; CSR_WRITE_2(sc, RL_MII, 0); /* Turn on data xmit. */ MII_SET(RL_MII_DIR); rl_mii_sync(sc); /* Send command/address info. */ rl_mii_send(sc, frame->mii_stdelim, 2); rl_mii_send(sc, frame->mii_opcode, 2); rl_mii_send(sc, frame->mii_phyaddr, 5); rl_mii_send(sc, frame->mii_regaddr, 5); /* Idle bit */ MII_CLR((RL_MII_CLK|RL_MII_DATAOUT)); DELAY(1); MII_SET(RL_MII_CLK); DELAY(1); /* Turn off xmit. */ MII_CLR(RL_MII_DIR); /* Check for ack */ MII_CLR(RL_MII_CLK); DELAY(1); ack = CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN; MII_SET(RL_MII_CLK); DELAY(1); /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for(i = 0; i < 16; i++) { MII_CLR(RL_MII_CLK); DELAY(1); MII_SET(RL_MII_CLK); DELAY(1); } goto fail; } for (i = 0x8000; i; i >>= 1) { MII_CLR(RL_MII_CLK); DELAY(1); if (!ack) { if (CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN) frame->mii_data |= i; DELAY(1); } MII_SET(RL_MII_CLK); DELAY(1); } fail: MII_CLR(RL_MII_CLK); DELAY(1); MII_SET(RL_MII_CLK); DELAY(1); RL_UNLOCK(sc); return (ack ? 1 : 0); } /* * Write to a PHY register through the MII. */ static int rl_mii_writereg(struct rl_softc *sc, struct rl_mii_frame *frame) { RL_LOCK(sc); /* Set up frame for TX. */ frame->mii_stdelim = RL_MII_STARTDELIM; frame->mii_opcode = RL_MII_WRITEOP; frame->mii_turnaround = RL_MII_TURNAROUND; /* Turn on data output. */ MII_SET(RL_MII_DIR); rl_mii_sync(sc); rl_mii_send(sc, frame->mii_stdelim, 2); rl_mii_send(sc, frame->mii_opcode, 2); rl_mii_send(sc, frame->mii_phyaddr, 5); rl_mii_send(sc, frame->mii_regaddr, 5); rl_mii_send(sc, frame->mii_turnaround, 2); rl_mii_send(sc, frame->mii_data, 16); /* Idle bit. */ MII_SET(RL_MII_CLK); DELAY(1); MII_CLR(RL_MII_CLK); DELAY(1); /* Turn off xmit. */ MII_CLR(RL_MII_DIR); RL_UNLOCK(sc); return (0); } static int rl_miibus_readreg(device_t dev, int phy, int reg) { struct rl_softc *sc; struct rl_mii_frame frame; uint16_t rval = 0; uint16_t rl8139_reg = 0; sc = device_get_softc(dev); if (sc->rl_type == RL_8139) { /* Pretend the internal PHY is only at address 0 */ if (phy) { return (0); } switch (reg) { case MII_BMCR: rl8139_reg = RL_BMCR; break; case MII_BMSR: rl8139_reg = RL_BMSR; break; case MII_ANAR: rl8139_reg = RL_ANAR; break; case MII_ANER: rl8139_reg = RL_ANER; break; case MII_ANLPAR: rl8139_reg = RL_LPAR; break; case MII_PHYIDR1: case MII_PHYIDR2: return (0); /* * Allow the rlphy driver to read the media status * register. If we have a link partner which does not * support NWAY, this is the register which will tell * us the results of parallel detection. */ case RL_MEDIASTAT: rval = CSR_READ_1(sc, RL_MEDIASTAT); return (rval); default: if_printf(sc->rl_ifp, "bad phy register\n"); return (0); } rval = CSR_READ_2(sc, rl8139_reg); return (rval); } bzero((char *)&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; rl_mii_readreg(sc, &frame); return (frame.mii_data); } static int rl_miibus_writereg(device_t dev, int phy, int reg, int data) { struct rl_softc *sc; struct rl_mii_frame frame; uint16_t rl8139_reg = 0; sc = device_get_softc(dev); if (sc->rl_type == RL_8139) { /* Pretend the internal PHY is only at address 0 */ if (phy) { return (0); } switch (reg) { case MII_BMCR: rl8139_reg = RL_BMCR; break; case MII_BMSR: rl8139_reg = RL_BMSR; break; case MII_ANAR: rl8139_reg = RL_ANAR; break; case MII_ANER: rl8139_reg = RL_ANER; break; case MII_ANLPAR: rl8139_reg = RL_LPAR; break; case MII_PHYIDR1: case MII_PHYIDR2: return (0); break; default: if_printf(sc->rl_ifp, "bad phy register\n"); return (0); } CSR_WRITE_2(sc, rl8139_reg, data); return (0); } bzero((char *)&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; frame.mii_data = data; rl_mii_writereg(sc, &frame); return (0); } static void rl_miibus_statchg(device_t dev) { } /* * Program the 64-bit multicast hash filter. */ static void rl_setmulti(struct rl_softc *sc) { struct ifnet *ifp = sc->rl_ifp; int h = 0; uint32_t hashes[2] = { 0, 0 }; struct ifmultiaddr *ifma; uint32_t rxfilt; int mcnt = 0; RL_LOCK_ASSERT(sc); rxfilt = CSR_READ_4(sc, RL_RXCFG); if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { rxfilt |= RL_RXCFG_RX_MULTI; CSR_WRITE_4(sc, RL_RXCFG, rxfilt); CSR_WRITE_4(sc, RL_MAR0, 0xFFFFFFFF); CSR_WRITE_4(sc, RL_MAR4, 0xFFFFFFFF); return; } /* first, zot all the existing hash bits */ CSR_WRITE_4(sc, RL_MAR0, 0); CSR_WRITE_4(sc, RL_MAR4, 0); /* now program new ones */ IF_ADDR_LOCK(ifp); TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; h = ether_crc32_be(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; if (h < 32) hashes[0] |= (1 << h); else hashes[1] |= (1 << (h - 32)); mcnt++; } IF_ADDR_UNLOCK(ifp); if (mcnt) rxfilt |= RL_RXCFG_RX_MULTI; else rxfilt &= ~RL_RXCFG_RX_MULTI; CSR_WRITE_4(sc, RL_RXCFG, rxfilt); CSR_WRITE_4(sc, RL_MAR0, hashes[0]); CSR_WRITE_4(sc, RL_MAR4, hashes[1]); } static void rl_reset(struct rl_softc *sc) { register int i; RL_LOCK_ASSERT(sc); CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET); for (i = 0; i < RL_TIMEOUT; i++) { DELAY(10); if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET)) break; } if (i == RL_TIMEOUT) if_printf(sc->rl_ifp, "reset never completed!\n"); } /* * Probe for a RealTek 8129/8139 chip. Check the PCI vendor and device * IDs against our list and return a device name if we find a match. */ static int rl_probe(device_t dev) { struct rl_softc *sc; struct rl_type *t = rl_devs; int rid; uint32_t hwrev; sc = device_get_softc(dev); while (t->rl_name != NULL) { if ((pci_get_vendor(dev) == t->rl_vid) && (pci_get_device(dev) == t->rl_did)) { /* * Temporarily map the I/O space * so we can read the chip ID register. */ rid = RL_RID; sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, RF_ACTIVE); if (sc->rl_res == NULL) { device_printf(dev, "couldn't map ports/memory\n"); return (ENXIO); } sc->rl_btag = rman_get_bustag(sc->rl_res); sc->rl_bhandle = rman_get_bushandle(sc->rl_res); hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV; bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res); /* Don't attach to 8139C+ or 8169/8110 chips. */ if (hwrev == RL_HWREV_8139CPLUS || (hwrev == RL_HWREV_8169 && t->rl_did == RT_DEVICEID_8169) || hwrev == RL_HWREV_8169S || hwrev == RL_HWREV_8110S) { t++; continue; } device_set_desc(dev, t->rl_name); return (BUS_PROBE_DEFAULT); } t++; } return (ENXIO); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ static int rl_attach(device_t dev) { uint8_t eaddr[ETHER_ADDR_LEN]; uint16_t as[3]; struct ifnet *ifp; struct rl_softc *sc; struct rl_type *t; int error = 0, i, rid; int unit; uint16_t rl_did = 0; sc = device_get_softc(dev); unit = device_get_unit(dev); mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF); pci_enable_busmaster(dev); /* Map control/status registers. */ rid = RL_RID; sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, RF_ACTIVE); if (sc->rl_res == NULL) { device_printf(dev, "couldn't map ports/memory\n"); error = ENXIO; goto fail; } #ifdef notdef /* * Detect the Realtek 8139B. For some reason, this chip is very * unstable when left to autoselect the media * The best workaround is to set the device to the required * media type or to set it to the 10 Meg speed. */ if ((rman_get_end(sc->rl_res) - rman_get_start(sc->rl_res)) == 0xFF) device_printf(dev, "Realtek 8139B detected. Warning, this may be unstable in autoselect mode\n"); #endif sc->rl_btag = rman_get_bustag(sc->rl_res); sc->rl_bhandle = rman_get_bushandle(sc->rl_res); /* Allocate interrupt */ rid = 0; sc->rl_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); if (sc->rl_irq == NULL) { device_printf(dev, "couldn't map interrupt\n"); error = ENXIO; goto fail; } /* * Reset the adapter. Only take the lock here as it's needed in * order to call rl_reset(). */ RL_LOCK(sc); rl_reset(sc); RL_UNLOCK(sc); sc->rl_eecmd_read = RL_EECMD_READ_6BIT; rl_read_eeprom(sc, (uint8_t *)&rl_did, 0, 1, 0); if (rl_did != 0x8129) sc->rl_eecmd_read = RL_EECMD_READ_8BIT; /* * Get station address from the EEPROM. */ rl_read_eeprom(sc, (uint8_t *)as, RL_EE_EADDR, 3, 0); for (i = 0; i < 3; i++) { eaddr[(i * 2) + 0] = as[i] & 0xff; eaddr[(i * 2) + 1] = as[i] >> 8; } sc->rl_unit = unit; /* * Now read the exact device type from the EEPROM to find * out if it's an 8129 or 8139. */ rl_read_eeprom(sc, (uint8_t *)&rl_did, RL_EE_PCI_DID, 1, 0); t = rl_devs; sc->rl_type = 0; while(t->rl_name != NULL) { if (rl_did == t->rl_did) { sc->rl_type = t->rl_basetype; break; } t++; } if (sc->rl_type == 0) { device_printf(dev, "unknown device ID: %x\n", rl_did); error = ENXIO; goto fail; } /* * Allocate the parent bus DMA tag appropriate for PCI. */ #define RL_NSEG_NEW 32 error = bus_dma_tag_create(NULL, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MAXBSIZE, RL_NSEG_NEW, /* maxsize, nsegments */ BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ BUS_DMA_ALLOCNOW, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->rl_parent_tag); if (error) goto fail; /* * Now allocate a tag for the DMA descriptor lists. * All of our lists are allocated as a contiguous block * of memory. */ error = bus_dma_tag_create(sc->rl_parent_tag, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ RL_RXBUFLEN + 1518, 1, /* maxsize,nsegments */ BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ BUS_DMA_ALLOCNOW, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->rl_tag); if (error) goto fail; /* * Now allocate a chunk of DMA-able memory based on the * tag we just created. */ error = bus_dmamem_alloc(sc->rl_tag, (void **)&sc->rl_cdata.rl_rx_buf, BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->rl_cdata.rl_rx_dmamap); if (error) { device_printf(dev, "no memory for list buffers!\n"); bus_dma_tag_destroy(sc->rl_tag); sc->rl_tag = NULL; goto fail; } /* Leave a few bytes before the start of the RX ring buffer. */ sc->rl_cdata.rl_rx_buf_ptr = sc->rl_cdata.rl_rx_buf; sc->rl_cdata.rl_rx_buf += sizeof(uint64_t); ifp = sc->rl_ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { device_printf(dev, "can not if_alloc()\n"); error = ENOSPC; goto fail; } /* Do MII setup */ if (mii_phy_probe(dev, &sc->rl_miibus, rl_ifmedia_upd, rl_ifmedia_sts)) { device_printf(dev, "MII without any phy!\n"); error = ENXIO; goto fail; } ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = rl_ioctl; ifp->if_start = rl_start; ifp->if_watchdog = rl_watchdog; ifp->if_init = rl_init; ifp->if_baudrate = 10000000; ifp->if_capabilities = IFCAP_VLAN_MTU; #ifdef DEVICE_POLLING ifp->if_capabilities |= IFCAP_POLLING; #endif ifp->if_capenable = ifp->if_capabilities; IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN; IFQ_SET_READY(&ifp->if_snd); callout_handle_init(&sc->rl_stat_ch); /* * Call MI attach routine. */ ether_ifattach(ifp, eaddr); /* Hook interrupt last to avoid having to lock softc */ error = bus_setup_intr(dev, sc->rl_irq, INTR_TYPE_NET | INTR_MPSAFE, rl_intr, sc, &sc->rl_intrhand); if (error) { if_printf(ifp, "couldn't set up irq\n"); ether_ifdetach(ifp); } fail: if (error) rl_detach(dev); return (error); } /* * Shutdown hardware and free up resources. This can be called any * time after the mutex has been initialized. It is called in both * the error case in attach and the normal detach case so it needs * to be careful about only freeing resources that have actually been * allocated. */ static int rl_detach(device_t dev) { struct rl_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); ifp = sc->rl_ifp; KASSERT(mtx_initialized(&sc->rl_mtx), ("rl mutex not initialized")); /* These should only be active if attach succeeded */ if (device_is_attached(dev)) { RL_LOCK(sc); rl_stop(sc); RL_UNLOCK(sc); ether_ifdetach(ifp); } #if 0 sc->suspended = 1; #endif if (ifp) if_free(ifp); if (sc->rl_miibus) device_delete_child(dev, sc->rl_miibus); bus_generic_detach(dev); if (sc->rl_intrhand) bus_teardown_intr(dev, sc->rl_irq, sc->rl_intrhand); if (sc->rl_irq) bus_release_resource(dev, SYS_RES_IRQ, 0, sc->rl_irq); if (sc->rl_res) bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res); if (sc->rl_tag) { bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap); bus_dmamem_free(sc->rl_tag, sc->rl_cdata.rl_rx_buf, sc->rl_cdata.rl_rx_dmamap); bus_dma_tag_destroy(sc->rl_tag); } if (sc->rl_parent_tag) bus_dma_tag_destroy(sc->rl_parent_tag); mtx_destroy(&sc->rl_mtx); return (0); } /* * Initialize the transmit descriptors. */ static int rl_list_tx_init(struct rl_softc *sc) { struct rl_chain_data *cd; int i; RL_LOCK_ASSERT(sc); cd = &sc->rl_cdata; for (i = 0; i < RL_TX_LIST_CNT; i++) { cd->rl_tx_chain[i] = NULL; CSR_WRITE_4(sc, RL_TXADDR0 + (i * sizeof(uint32_t)), 0x0000000); } sc->rl_cdata.cur_tx = 0; sc->rl_cdata.last_tx = 0; return (0); } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. * * You know there's something wrong with a PCI bus-master chip design * when you have to use m_devget(). * * The receive operation is badly documented in the datasheet, so I'll * attempt to document it here. The driver provides a buffer area and * places its base address in the RX buffer start address register. * The chip then begins copying frames into the RX buffer. Each frame * is preceded by a 32-bit RX status word which specifies the length * of the frame and certain other status bits. Each frame (starting with * the status word) is also 32-bit aligned. The frame length is in the * first 16 bits of the status word; the lower 15 bits correspond with * the 'rx status register' mentioned in the datasheet. * * Note: to make the Alpha happy, the frame payload needs to be aligned * on a 32-bit boundary. To achieve this, we pass RL_ETHER_ALIGN (2 bytes) * as the offset argument to m_devget(). */ static void rl_rxeof(struct rl_softc *sc) { struct mbuf *m; struct ifnet *ifp = sc->rl_ifp; uint8_t *rxbufpos; int total_len = 0; int wrap = 0; uint32_t rxstat; uint16_t cur_rx; uint16_t limit; uint16_t max_bytes, rx_bytes = 0; RL_LOCK_ASSERT(sc); bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, BUS_DMASYNC_POSTREAD); cur_rx = (CSR_READ_2(sc, RL_CURRXADDR) + 16) % RL_RXBUFLEN; /* Do not try to read past this point. */ limit = CSR_READ_2(sc, RL_CURRXBUF) % RL_RXBUFLEN; if (limit < cur_rx) max_bytes = (RL_RXBUFLEN - cur_rx) + limit; else max_bytes = limit - cur_rx; while((CSR_READ_1(sc, RL_COMMAND) & RL_CMD_EMPTY_RXBUF) == 0) { #ifdef DEVICE_POLLING if (ifp->if_flags & IFF_POLLING) { if (sc->rxcycles <= 0) break; sc->rxcycles--; } #endif /* DEVICE_POLLING */ rxbufpos = sc->rl_cdata.rl_rx_buf + cur_rx; rxstat = le32toh(*(uint32_t *)rxbufpos); /* * Here's a totally undocumented fact for you. When the * RealTek chip is in the process of copying a packet into * RAM for you, the length will be 0xfff0. If you spot a * packet header with this value, you need to stop. The * datasheet makes absolutely no mention of this and * RealTek should be shot for this. */ if ((uint16_t)(rxstat >> 16) == RL_RXSTAT_UNFINISHED) break; if (!(rxstat & RL_RXSTAT_RXOK)) { ifp->if_ierrors++; rl_init_locked(sc); return; } /* No errors; receive the packet. */ total_len = rxstat >> 16; rx_bytes += total_len + 4; /* * XXX The RealTek chip includes the CRC with every * received frame, and there's no way to turn this * behavior off (at least, I can't find anything in * the manual that explains how to do it) so we have * to trim off the CRC manually. */ total_len -= ETHER_CRC_LEN; /* * Avoid trying to read more bytes than we know * the chip has prepared for us. */ if (rx_bytes > max_bytes) break; rxbufpos = sc->rl_cdata.rl_rx_buf + ((cur_rx + sizeof(uint32_t)) % RL_RXBUFLEN); if (rxbufpos == (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN)) rxbufpos = sc->rl_cdata.rl_rx_buf; wrap = (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN) - rxbufpos; if (total_len > wrap) { m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp, NULL); if (m == NULL) { ifp->if_ierrors++; } else { m_copyback(m, wrap, total_len - wrap, sc->rl_cdata.rl_rx_buf); } cur_rx = (total_len - wrap + ETHER_CRC_LEN); } else { m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp, NULL); if (m == NULL) ifp->if_ierrors++; cur_rx += total_len + 4 + ETHER_CRC_LEN; } /* Round up to 32-bit boundary. */ cur_rx = (cur_rx + 3) & ~3; CSR_WRITE_2(sc, RL_CURRXADDR, cur_rx - 16); if (m == NULL) continue; ifp->if_ipackets++; RL_UNLOCK(sc); (*ifp->if_input)(ifp, m); RL_LOCK(sc); } } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ static void rl_txeof(struct rl_softc *sc) { struct ifnet *ifp = sc->rl_ifp; uint32_t txstat; RL_LOCK_ASSERT(sc); /* * Go through our tx list and free mbufs for those * frames that have been uploaded. */ do { if (RL_LAST_TXMBUF(sc) == NULL) break; txstat = CSR_READ_4(sc, RL_LAST_TXSTAT(sc)); if (!(txstat & (RL_TXSTAT_TX_OK| RL_TXSTAT_TX_UNDERRUN|RL_TXSTAT_TXABRT))) break; ifp->if_collisions += (txstat & RL_TXSTAT_COLLCNT) >> 24; bus_dmamap_unload(sc->rl_tag, RL_LAST_DMAMAP(sc)); bus_dmamap_destroy(sc->rl_tag, RL_LAST_DMAMAP(sc)); m_freem(RL_LAST_TXMBUF(sc)); RL_LAST_TXMBUF(sc) = NULL; /* * If there was a transmit underrun, bump the TX threshold. * Make sure not to overflow the 63 * 32byte we can address * with the 6 available bit. */ if ((txstat & RL_TXSTAT_TX_UNDERRUN) && (sc->rl_txthresh < 2016)) sc->rl_txthresh += 32; if (txstat & RL_TXSTAT_TX_OK) ifp->if_opackets++; else { int oldthresh; ifp->if_oerrors++; if ((txstat & RL_TXSTAT_TXABRT) || (txstat & RL_TXSTAT_OUTOFWIN)) CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); oldthresh = sc->rl_txthresh; /* error recovery */ rl_reset(sc); rl_init_locked(sc); /* restore original threshold */ sc->rl_txthresh = oldthresh; return; } RL_INC(sc->rl_cdata.last_tx); ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; } while (sc->rl_cdata.last_tx != sc->rl_cdata.cur_tx); if (RL_LAST_TXMBUF(sc) == NULL) ifp->if_timer = 0; else if (ifp->if_timer == 0) ifp->if_timer = 5; } static void rl_tick(void *xsc) { struct rl_softc *sc = xsc; struct mii_data *mii; RL_LOCK(sc); mii = device_get_softc(sc->rl_miibus); mii_tick(mii); sc->rl_stat_ch = timeout(rl_tick, sc, hz); RL_UNLOCK(sc); } #ifdef DEVICE_POLLING static void rl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) { struct rl_softc *sc = ifp->if_softc; RL_LOCK(sc); rl_poll_locked(ifp, cmd, count); RL_UNLOCK(sc); } static void rl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) { struct rl_softc *sc = ifp->if_softc; RL_LOCK_ASSERT(sc); if (!(ifp->if_capenable & IFCAP_POLLING)) { ether_poll_deregister(ifp); cmd = POLL_DEREGISTER; } if (cmd == POLL_DEREGISTER) { /* Final call; enable interrupts. */ CSR_WRITE_2(sc, RL_IMR, RL_INTRS); return; } sc->rxcycles = count; rl_rxeof(sc); rl_txeof(sc); if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) rl_start_locked(ifp); if (cmd == POLL_AND_CHECK_STATUS) { uint16_t status; /* We should also check the status register. */ status = CSR_READ_2(sc, RL_ISR); if (status == 0xffff) return; if (status != 0) CSR_WRITE_2(sc, RL_ISR, status); /* XXX We should check behaviour on receiver stalls. */ if (status & RL_ISR_SYSTEM_ERR) { rl_reset(sc); rl_init_locked(sc); } } } #endif /* DEVICE_POLLING */ static void rl_intr(void *arg) { struct rl_softc *sc = arg; struct ifnet *ifp = sc->rl_ifp; uint16_t status; RL_LOCK(sc); if (sc->suspended) goto done_locked; #ifdef DEVICE_POLLING if (ifp->if_flags & IFF_POLLING) goto done_locked; if ((ifp->if_capenable & IFCAP_POLLING) && ether_poll_register(rl_poll, ifp)) { /* Disable interrupts. */ CSR_WRITE_2(sc, RL_IMR, 0x0000); rl_poll_locked(ifp, 0, 1); goto done_locked; } #endif /* DEVICE_POLLING */ for (;;) { status = CSR_READ_2(sc, RL_ISR); /* If the card has gone away, the read returns 0xffff. */ if (status == 0xffff) break; if (status != 0) CSR_WRITE_2(sc, RL_ISR, status); if ((status & RL_INTRS) == 0) break; if (status & RL_ISR_RX_OK) rl_rxeof(sc); if (status & RL_ISR_RX_ERR) rl_rxeof(sc); if ((status & RL_ISR_TX_OK) || (status & RL_ISR_TX_ERR)) rl_txeof(sc); if (status & RL_ISR_SYSTEM_ERR) { rl_reset(sc); rl_init_locked(sc); } } if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) rl_start_locked(ifp); done_locked: RL_UNLOCK(sc); } /* * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data * pointers to the fragment pointers. */ static int rl_encap(struct rl_softc *sc, struct mbuf *m_head) { struct mbuf *m_new = NULL; RL_LOCK_ASSERT(sc); /* * The RealTek is brain damaged and wants longword-aligned * TX buffers, plus we can only have one fragment buffer * per packet. We have to copy pretty much all the time. */ m_new = m_defrag(m_head, M_DONTWAIT); if (m_new == NULL) { m_freem(m_head); return (1); } m_head = m_new; /* Pad frames to at least 60 bytes. */ if (m_head->m_pkthdr.len < RL_MIN_FRAMELEN) { /* * Make security concious people happy: zero out the * bytes in the pad area, since we don't know what * this mbuf cluster buffer's previous user might * have left in it. */ bzero(mtod(m_head, char *) + m_head->m_pkthdr.len, RL_MIN_FRAMELEN - m_head->m_pkthdr.len); m_head->m_pkthdr.len += (RL_MIN_FRAMELEN - m_head->m_pkthdr.len); m_head->m_len = m_head->m_pkthdr.len; } RL_CUR_TXMBUF(sc) = m_head; return (0); } /* * Main transmit routine. */ static void rl_start(struct ifnet *ifp) { struct rl_softc *sc = ifp->if_softc; RL_LOCK(sc); rl_start_locked(ifp); RL_UNLOCK(sc); } static void rl_start_locked(struct ifnet *ifp) { struct rl_softc *sc = ifp->if_softc; struct mbuf *m_head = NULL; RL_LOCK_ASSERT(sc); while (RL_CUR_TXMBUF(sc) == NULL) { IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; if (rl_encap(sc, m_head)) break; /* Pass a copy of this mbuf chain to the bpf subsystem. */ BPF_MTAP(ifp, RL_CUR_TXMBUF(sc)); /* Transmit the frame. */ bus_dmamap_create(sc->rl_tag, 0, &RL_CUR_DMAMAP(sc)); bus_dmamap_load(sc->rl_tag, RL_CUR_DMAMAP(sc), mtod(RL_CUR_TXMBUF(sc), void *), RL_CUR_TXMBUF(sc)->m_pkthdr.len, rl_dma_map_txbuf, sc, 0); bus_dmamap_sync(sc->rl_tag, RL_CUR_DMAMAP(sc), BUS_DMASYNC_PREREAD); CSR_WRITE_4(sc, RL_CUR_TXSTAT(sc), RL_TXTHRESH(sc->rl_txthresh) | RL_CUR_TXMBUF(sc)->m_pkthdr.len); RL_INC(sc->rl_cdata.cur_tx); /* Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; } /* * We broke out of the loop because all our TX slots are * full. Mark the NIC as busy until it drains some of the * packets from the queue. */ if (RL_CUR_TXMBUF(sc) != NULL) ifp->if_drv_flags |= IFF_DRV_OACTIVE; } static void rl_init(void *xsc) { struct rl_softc *sc = xsc; RL_LOCK(sc); rl_init_locked(sc); RL_UNLOCK(sc); } static void rl_init_locked(struct rl_softc *sc) { struct ifnet *ifp = sc->rl_ifp; struct mii_data *mii; uint32_t rxcfg = 0; RL_LOCK_ASSERT(sc); mii = device_get_softc(sc->rl_miibus); /* * Cancel pending I/O and free all RX/TX buffers. */ rl_stop(sc); /* * Init our MAC address. Even though the chipset * documentation doesn't mention it, we need to enter "Config * register write enable" mode to modify the ID registers. */ CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); CSR_WRITE_STREAM_4(sc, RL_IDR0, *(uint32_t *)(&IFP2ENADDR(sc->rl_ifp)[0])); CSR_WRITE_STREAM_4(sc, RL_IDR4, *(uint32_t *)(&IFP2ENADDR(sc->rl_ifp)[4])); CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); /* Init the RX buffer pointer register. */ bus_dmamap_load(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, sc->rl_cdata.rl_rx_buf, RL_RXBUFLEN, rl_dma_map_rxbuf, sc, 0); bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, BUS_DMASYNC_PREWRITE); /* Init TX descriptors. */ rl_list_tx_init(sc); /* * Enable transmit and receive. */ CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); /* * Set the initial TX and RX configuration. */ CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); CSR_WRITE_4(sc, RL_RXCFG, RL_RXCFG_CONFIG); /* Set the individual bit to receive frames for this host only. */ rxcfg = CSR_READ_4(sc, RL_RXCFG); rxcfg |= RL_RXCFG_RX_INDIV; /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) { rxcfg |= RL_RXCFG_RX_ALLPHYS; CSR_WRITE_4(sc, RL_RXCFG, rxcfg); } else { rxcfg &= ~RL_RXCFG_RX_ALLPHYS; CSR_WRITE_4(sc, RL_RXCFG, rxcfg); } /* Set capture broadcast bit to capture broadcast frames. */ if (ifp->if_flags & IFF_BROADCAST) { rxcfg |= RL_RXCFG_RX_BROAD; CSR_WRITE_4(sc, RL_RXCFG, rxcfg); } else { rxcfg &= ~RL_RXCFG_RX_BROAD; CSR_WRITE_4(sc, RL_RXCFG, rxcfg); } /* Program the multicast filter, if necessary. */ rl_setmulti(sc); #ifdef DEVICE_POLLING /* Disable interrupts if we are polling. */ if (ifp->if_flags & IFF_POLLING) CSR_WRITE_2(sc, RL_IMR, 0); else #endif /* DEVICE_POLLING */ /* Enable interrupts. */ CSR_WRITE_2(sc, RL_IMR, RL_INTRS); /* Set initial TX threshold */ sc->rl_txthresh = RL_TX_THRESH_INIT; /* Start RX/TX process. */ CSR_WRITE_4(sc, RL_MISSEDPKT, 0); /* Enable receiver and transmitter. */ CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); mii_mediachg(mii); CSR_WRITE_1(sc, RL_CFG1, RL_CFG1_DRVLOAD|RL_CFG1_FULLDUPLEX); ifp->if_drv_flags |= IFF_DRV_RUNNING; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; sc->rl_stat_ch = timeout(rl_tick, sc, hz); } /* * Set media options. */ static int rl_ifmedia_upd(struct ifnet *ifp) { struct rl_softc *sc = ifp->if_softc; struct mii_data *mii; mii = device_get_softc(sc->rl_miibus); mii_mediachg(mii); return (0); } /* * Report current media status. */ static void rl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct rl_softc *sc = ifp->if_softc; struct mii_data *mii; mii = device_get_softc(sc->rl_miibus); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; } static int rl_ioctl(struct ifnet *ifp, u_long command, caddr_t data) { struct ifreq *ifr = (struct ifreq *)data; struct mii_data *mii; struct rl_softc *sc = ifp->if_softc; int error = 0; switch (command) { case SIOCSIFFLAGS: RL_LOCK(sc); if (ifp->if_flags & IFF_UP) { rl_init_locked(sc); } else { if (ifp->if_drv_flags & IFF_DRV_RUNNING) rl_stop(sc); } RL_UNLOCK(sc); error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: RL_LOCK(sc); rl_setmulti(sc); RL_UNLOCK(sc); error = 0; break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: mii = device_get_softc(sc->rl_miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); break; case SIOCSIFCAP: ifp->if_capenable &= ~IFCAP_POLLING; ifp->if_capenable |= ifr->ifr_reqcap & IFCAP_POLLING; break; default: error = ether_ioctl(ifp, command, data); break; } return (error); } static void rl_watchdog(struct ifnet *ifp) { struct rl_softc *sc = ifp->if_softc; RL_LOCK(sc); if_printf(ifp, "watchdog timeout\n"); ifp->if_oerrors++; rl_txeof(sc); rl_rxeof(sc); rl_init_locked(sc); RL_UNLOCK(sc); } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ static void rl_stop(struct rl_softc *sc) { register int i; struct ifnet *ifp = sc->rl_ifp; RL_LOCK_ASSERT(sc); ifp->if_timer = 0; untimeout(rl_tick, sc, sc->rl_stat_ch); ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); #ifdef DEVICE_POLLING ether_poll_deregister(ifp); #endif /* DEVICE_POLLING */ CSR_WRITE_1(sc, RL_COMMAND, 0x00); CSR_WRITE_2(sc, RL_IMR, 0x0000); bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap); /* * Free the TX list buffers. */ for (i = 0; i < RL_TX_LIST_CNT; i++) { if (sc->rl_cdata.rl_tx_chain[i] != NULL) { bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_tx_dmamap[i]); bus_dmamap_destroy(sc->rl_tag, sc->rl_cdata.rl_tx_dmamap[i]); m_freem(sc->rl_cdata.rl_tx_chain[i]); sc->rl_cdata.rl_tx_chain[i] = NULL; CSR_WRITE_4(sc, RL_TXADDR0 + (i * sizeof(uint32_t)), 0x0000000); } } } /* * Device suspend routine. Stop the interface and save some PCI * settings in case the BIOS doesn't restore them properly on * resume. */ static int rl_suspend(device_t dev) { struct rl_softc *sc; sc = device_get_softc(dev); RL_LOCK(sc); rl_stop(sc); sc->suspended = 1; RL_UNLOCK(sc); return (0); } /* * Device resume routine. Restore some PCI settings in case the BIOS * doesn't, re-enable busmastering, and restart the interface if * appropriate. */ static int rl_resume(device_t dev) { struct rl_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); ifp = sc->rl_ifp; RL_LOCK(sc); /* reinitialize interface if necessary */ if (ifp->if_flags & IFF_UP) rl_init_locked(sc); sc->suspended = 0; RL_UNLOCK(sc); return (0); } /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ static void rl_shutdown(device_t dev) { struct rl_softc *sc; sc = device_get_softc(dev); RL_LOCK(sc); rl_stop(sc); RL_UNLOCK(sc); }