.\" DO NOT EDIT-- this file is @generated by tools/build/options/makeman.
.\" $FreeBSD$
.Dd November 26, 2018
.Dt SRC.CONF 5
.Os
.Sh NAME
.Nm src.conf
.Nd "source build options"
.Sh DESCRIPTION
The
.Nm
file contains settings that will apply to every build involving the
.Fx
source tree; see
.Xr build 7 .
.Pp
The
.Nm
file uses the standard makefile syntax.
However,
.Nm
should not specify any dependencies to
.Xr make 1 .
Instead,
.Nm
is to set
.Xr make 1
variables that control the aspects of how the system builds.
.Pp
The default location of
.Nm
is
.Pa /etc/src.conf ,
though an alternative location can be specified in the
.Xr make 1
variable
.Va SRCCONF .
Overriding the location of
.Nm
may be necessary if the system-wide settings are not suitable
for a particular build.
For instance, setting
.Va SRCCONF
to
.Pa /dev/null
effectively resets all build controls to their defaults.
.Pp
The only purpose of
.Nm
is to control the compilation of the
.Fx
source code, which is usually located in
.Pa /usr/src .
As a rule, the system administrator creates
.Nm
when the values of certain control variables need to be changed
from their defaults.
.Pp
In addition, control variables can be specified
for a particular build via the
.Fl D
option of
.Xr make 1
or in its environment; see
.Xr environ 7 .
.Pp
The environment of
.Xr make 1
for the build can be controlled via the
.Va SRC_ENV_CONF
variable, which defaults to
.Pa /etc/src-env.conf .
Some examples that may only be set in this file are
.Va WITH_DIRDEPS_BUILD ,
and
.Va WITH_META_MODE ,
and
.Va MAKEOBJDIRPREFIX
as they are environment-only variables.
.Pp
The values of variables are ignored regardless of their setting;
even if they would be set to
.Dq Li FALSE
or
.Dq Li NO .
The presence of an option causes
it to be honored by
.Xr make 1 .
.Pp
This list provides a name and short description for variables
that can be used for source builds.
.Bl -tag -width indent
.It Va WITHOUT_ACCT
Set to not build process accounting tools such as
.Xr accton 8
and
.Xr sa 8 .
.It Va WITHOUT_ACPI
Set to not build
.Xr acpiconf 8 ,
.Xr acpidump 8
and related programs.
.It Va WITHOUT_AMD
Set to not build
.Xr amd 8 ,
and related programs.
.It Va WITHOUT_APM
Set to not build
.Xr apm 8 ,
.Xr apmd 8
and related programs.
.It Va WITHOUT_ASSERT_DEBUG
Set to compile programs and libraries without the
.Xr assert 3
checks.
.It Va WITHOUT_AT
Set to not build
.Xr at 1
and related utilities.
.It Va WITHOUT_ATM
Set to not build
programs and libraries related to ATM networking.
.It Va WITHOUT_AUDIT
Set to not build audit support into system programs.
.It Va WITHOUT_AUTHPF
Set to not build
.Xr authpf 8 .
.It Va WITHOUT_AUTOFS
Set to not build
.Xr autofs 5
related programs, libraries, and kernel modules.
.It Va WITHOUT_AUTO_OBJ
Disable automatic creation of objdirs.
This is enabled by default if the wanted OBJDIR is writable by the current user.
.Pp
This must be set in the environment, make command line, or
.Pa /etc/src-env.conf ,
not
.Pa /etc/src.conf .
.It Va WITHOUT_BHYVE
Set to not build or install
.Xr bhyve 8 ,
associated utilities, and examples.
.Pp
This option only affects amd64/amd64.
.It Va WITH_BIND_NOW
Build all binaries with the
.Dv DF_BIND_NOW
flag set to indicate that the run-time loader should perform all relocation
processing at process startup rather than on demand.
.It Va WITHOUT_BINUTILS
Set to not build or install GNU
.Xr as 1 ,
.Xr objdump 1 ,
and for some CPU architectures
.Xr ld.bfd 1
as part
of the normal system build.
The resulting system cannot build programs from source.
.Pp
This is a default setting on
arm64/aarch64 and riscv/riscv64.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_GDB
.El
.It Va WITH_BINUTILS
Set to build and install GNU
.Xr as 1 ,
.Xr objdump 1 ,
and for some CPU architectures
.Xr ld.bfd 1
as part
of the normal system build.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITHOUT_BINUTILS_BOOTSTRAP
Set to not build binutils (as, ld, and objdump)
as part of the bootstrap process.
.Bf -symbolic
The option does not work for build targets unless some alternative
toolchain is provided.
.Ef
.Pp
This is a default setting on
arm64/aarch64 and riscv/riscv64.
.It Va WITH_BINUTILS_BOOTSTRAP
Set build binutils (as, ld, and objdump)
as part of the bootstrap process.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITHOUT_BLACKLIST
Set this if you do not want to build
.Xr blacklistd 8
and
.Xr blacklistctl 8 .
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_BLACKLIST_SUPPORT
(unless
.Va WITH_BLACKLIST_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_BLACKLIST_SUPPORT
Set to build some programs without
.Xr libblacklist 3
support, like
.Xr fingerd 8 ,
.Xr ftpd 8 ,
.Xr rlogind 8 ,
.Xr rshd 8 ,
and
.Xr sshd 8 .
.It Va WITHOUT_BLUETOOTH
Set to not build Bluetooth related kernel modules, programs and libraries.
.It Va WITHOUT_BOOT
Set to not build the boot blocks and loader.
.It Va WITHOUT_BOOTPARAMD
Set to not build or install
.Xr bootparamd 8 .
.It Va WITHOUT_BOOTPD
Set to not build or install
.Xr bootpd 8 .
.It Va WITHOUT_BSDINSTALL
Set to not build
.Xr bsdinstall 8 ,
.Xr sade 8 ,
and related programs.
.It Va WITHOUT_BSD_CPIO
Set to not build the BSD licensed version of cpio based on
.Xr libarchive 3 .
.It Va WITHOUT_BSD_CRTBEGIN
Disable the BSD licensed
.Pa crtbegin.o
and
.Pa crtend.o .
.It Va WITH_BSD_GREP
Install BSD-licensed grep as '[ef]grep' instead of GNU grep.
.It Va WITHOUT_BSNMP
Set to not build or install
.Xr bsnmpd 1
and related libraries and data files.
.It Va WITHOUT_BZIP2
Set to not build contributed bzip2 software as a part of the base system.
.Bf -symbolic
The option has no effect yet.
.Ef
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_BZIP2_SUPPORT
(unless
.Va WITH_BZIP2_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_BZIP2_SUPPORT
Set to build some programs without optional bzip2 support.
.It Va WITHOUT_CALENDAR
Set to not build
.Xr calendar 1 .
.It Va WITHOUT_CAPSICUM
Set to not build Capsicum support into system programs.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_CASPER
.El
.It Va WITHOUT_CASPER
Set to not build Casper program and related libraries.
.It Va WITH_CCACHE_BUILD
Set to use
.Xr ccache 1
for the build.
No configuration is required except to install the
.Sy devel/ccache
package.
When using with
.Xr distcc 1 ,
set
.Sy CCACHE_PREFIX=/usr/local/bin/distcc .
The default cache directory of
.Pa $HOME/.ccache
will be used, which can be overridden by setting
.Sy CCACHE_DIR .
The
.Sy CCACHE_COMPILERCHECK
option defaults to
.Sy content
when using the in-tree bootstrap compiler,
and
.Sy mtime
when using an external compiler.
The
.Sy CCACHE_CPP2
option is used for Clang but not GCC.
.Pp
Sharing a cache between multiple work directories requires using a layout
similar to
.Pa /some/prefix/src
.Pa /some/prefix/obj
and an environment such as:
.Bd -literal -offset indent
CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj'
.Ed
.Pp
See
.Xr ccache 1
for more configuration options.
.It Va WITHOUT_CCD
Set to not build
.Xr geom_ccd 4
and related utilities.
.It Va WITHOUT_CDDL
Set to not build code licensed under Sun's CDDL.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_CTF
.It
.Va WITHOUT_ZFS
.El
.It Va WITHOUT_CLANG
Set to not build the Clang C/C++ compiler during the regular phase of the build.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_CLANG_EXTRAS
.It
.Va WITHOUT_CLANG_FULL
.It
.Va WITHOUT_LLVM_COV
.El
.Pp
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_LLVM_TARGET_AARCH64
(unless
.Va WITH_LLVM_TARGET_AARCH64
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_ALL
(unless
.Va WITH_LLVM_TARGET_ALL
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_ARM
(unless
.Va WITH_LLVM_TARGET_ARM
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_MIPS
(unless
.Va WITH_LLVM_TARGET_MIPS
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_POWERPC
(unless
.Va WITH_LLVM_TARGET_POWERPC
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_SPARC
(unless
.Va WITH_LLVM_TARGET_SPARC
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_X86
(unless
.Va WITH_LLVM_TARGET_X86
is set explicitly)
.El
.It Va WITH_CLANG
Set to build the Clang C/C++ compiler during the normal phase of the build.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_CLANG_BOOTSTRAP
Set to not build the Clang C/C++ compiler during the bootstrap phase of
the build.
To be able to build the system, either gcc or clang bootstrap must be
enabled unless an alternate compiler is provided via XCC.
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_CLANG_BOOTSTRAP
Set to build the Clang C/C++ compiler during the bootstrap phase of the build.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64 and i386/i386.
.It Va WITH_CLANG_EXTRAS
Set to build additional clang and llvm tools, such as bugpoint.
.It Va WITHOUT_CLANG_FULL
Set to avoid building the ARCMigrate, Rewriter and StaticAnalyzer components of
the Clang C/C++ compiler.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_CLANG_FULL
Set to build the ARCMigrate, Rewriter and StaticAnalyzer components of the
Clang C/C++ compiler.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_CLANG_IS_CC
Set to install the GCC compiler as
.Pa /usr/bin/cc ,
.Pa /usr/bin/c++
and
.Pa /usr/bin/cpp .
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_CLANG_IS_CC
Set to install the Clang C/C++ compiler as
.Pa /usr/bin/cc ,
.Pa /usr/bin/c++
and
.Pa /usr/bin/cpp .
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64 and i386/i386.
.It Va WITHOUT_CPP
Set to not build
.Xr cpp 1 .
.It Va WITHOUT_CROSS_COMPILER
Set to not build any cross compiler in the cross-tools stage of buildworld.
When compiling a different version of
.Fx
than what is installed on the system, provide an alternate
compiler with XCC to ensure success.
When compiling with an identical version of
.Fx
to the host, this option may be safely used.
This option may also be safe when the host version of
.Fx
is close to the sources being built, but all bets are off if there have
been any changes to the toolchain between the versions.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_BINUTILS_BOOTSTRAP
.It
.Va WITHOUT_CLANG_BOOTSTRAP
.It
.Va WITHOUT_ELFTOOLCHAIN_BOOTSTRAP
.It
.Va WITHOUT_GCC_BOOTSTRAP
.It
.Va WITHOUT_LLD_BOOTSTRAP
.El
.It Va WITHOUT_CRYPT
Set to not build any crypto code.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_KERBEROS
.It
.Va WITHOUT_OPENSSH
.It
.Va WITHOUT_OPENSSL
.El
.Pp
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_GSSAPI
(unless
.Va WITH_GSSAPI
is set explicitly)
.El
.It Va WITH_CTF
Set to compile with CTF (Compact C Type Format) data.
CTF data encapsulates a reduced form of debugging information
similar to DWARF and the venerable stabs and is required for DTrace.
.It Va WITHOUT_CTM
Set to not build
.Xr ctm 1
and related utilities.
.It Va WITHOUT_CUSE
Set to not build CUSE-related programs and libraries.
.It Va WITHOUT_CXGBETOOL
Set to not build
.Xr cxgbetool 8
.Pp
This is a default setting on
arm/arm, arm/armv6, arm/armv7, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpcspe and riscv/riscv64.
.It Va WITH_CXGBETOOL
Set to build
.Xr cxgbetool 8
.Pp
This is a default setting on
amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc64 and sparc64/sparc64.
.It Va WITHOUT_CXX
Set to not build
.Xr c++ 1
and related libraries.
It will also prevent building of
.Xr gperf 1
and
.Xr devd 8 .
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_CLANG
.It
.Va WITHOUT_CLANG_EXTRAS
.It
.Va WITHOUT_CLANG_FULL
.It
.Va WITHOUT_DTRACE_TESTS
.It
.Va WITHOUT_GNUCXX
.It
.Va WITHOUT_LLVM_COV
.It
.Va WITHOUT_TESTS
.El
.It Va WITHOUT_DEBUG_FILES
Set to avoid building or installing standalone debug files for each
executable binary and shared library.
.It Va WITHOUT_DIALOG
Set to not build
.Xr dialog 1 ,
.Xr dialog 3 ,
.Xr dpv 1 ,
and
.Xr dpv 3 .
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_BSDINSTALL
.El
.It Va WITHOUT_DICT
Set to not build the Webster dictionary files.
.It Va WITH_DIRDEPS_BUILD
This is an experimental build system.
For details see
http://www.crufty.net/sjg/docs/freebsd-meta-mode.htm.
Build commands can be seen from the top-level with:
.Dl make show-valid-targets
The build is driven by dirdeps.mk using
.Va DIRDEPS
stored in
Makefile.depend files found in each directory.
.Pp
The build can be started from anywhere, and behaves the same.
The initial instance of
.Xr make 1
recursively reads
.Va DIRDEPS
from
.Pa Makefile.depend ,
computing a graph of tree dependencies from the current origin.
Setting
.Va NO_DIRDEPS
skips checking dirdep dependencies and will only build in the current
and child directories.
.Va NO_DIRDEPS_BELOW
skips building any dirdeps and only build the current directory.
.Pp
This also utilizes the
.Va WITH_META_MODE
logic for incremental builds.
.Pp
The build hides commands executed unless
.Va NO_SILENT
is defined.
.Pp
Note that there is currently no mass install feature for this.
.Pp
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITH_INSTALL_AS_USER
.El
.Pp
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITH_META_MODE
(unless
.Va WITHOUT_META_MODE
is set explicitly)
.It Va WITH_STAGING
(unless
.Va WITHOUT_STAGING
is set explicitly)
.It Va WITH_STAGING_MAN
(unless
.Va WITHOUT_STAGING_MAN
is set explicitly)
.It Va WITH_STAGING_PROG
(unless
.Va WITHOUT_STAGING_PROG
is set explicitly)
.It Va WITH_SYSROOT
(unless
.Va WITHOUT_SYSROOT
is set explicitly)
.El
.Pp
This must be set in the environment, make command line, or
.Pa /etc/src-env.conf ,
not
.Pa /etc/src.conf .
.It Va WITH_DIRDEPS_CACHE
Cache result of dirdeps.mk which can save significant time
for subsequent builds.
Depends on
.Va WITH_DIRDEPS_BUILD .
.Pp
This must be set in the environment, make command line, or
.Pa /etc/src-env.conf ,
not
.Pa /etc/src.conf .
.It Va WITHOUT_DMAGENT
Set to not build dma Mail Transport Agent.
.It Va WITHOUT_DOCCOMPRESS
Set to not install compressed system documentation.
Only the uncompressed version will be installed.
.It Va WITH_DTRACE_TESTS
Set to build and install the DTrace test suite in
.Pa /usr/tests/cddl/usr.sbin/dtrace .
This test suite is considered experimental on architectures other than
amd64/amd64 and running it may cause system instability.
.It Va WITHOUT_DYNAMICROOT
Set this if you do not want to link
.Pa /bin
and
.Pa /sbin
dynamically.
.It Va WITHOUT_EE
Set to not build and install
.Xr edit 1 ,
.Xr ee 1 ,
and related programs.
.It Va WITHOUT_EFI
Set not to build
.Xr efivar 3
and
.Xr efivar 8 .
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_EFI
Set to build
.Xr efivar 3
and
.Xr efivar 8 .
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64 and i386/i386.
.It Va WITHOUT_ELFTOOLCHAIN_BOOTSTRAP
Set to not build ELF Tool Chain tools
(addr2line, nm, size, strings and strip)
as part of the bootstrap process.
.Bf -symbolic
An alternate bootstrap tool chain must be provided.
.Ef
.It Va WITHOUT_EXAMPLES
Set to avoid installing examples to
.Pa /usr/share/examples/ .
.It Va WITH_EXPERIMENTAL
Set to include experimental features in the build.
.It Va WITH_EXTRA_TCP_STACKS
Set to build extra TCP stack modules.
.It Va WITHOUT_FDT
Set to not build Flattened Device Tree support as part of the base system.
This includes the device tree compiler (dtc) and libfdt support library.
.It Va WITHOUT_FILE
Set to not build
.Xr file 1
and related programs.
.It Va WITHOUT_FINGER
Set to not build or install
.Xr finger 1
and
.Xr fingerd 8 .
.It Va WITHOUT_FLOPPY
Set to not build or install programs
for operating floppy disk driver.
.It Va WITHOUT_FMTREE
Set to not build and install
.Pa /usr/sbin/fmtree .
.It Va WITHOUT_FORMAT_EXTENSIONS
Set to not enable
.Fl fformat-extensions
when compiling the kernel.
Also disables all format checking.
.It Va WITHOUT_FORTH
Set to build bootloaders without Forth support.
.It Va WITHOUT_FP_LIBC
Set to build
.Nm libc
without floating-point support.
.It Va WITHOUT_FREEBSD_UPDATE
Set to not build
.Xr freebsd-update 8 .
.It Va WITHOUT_FTP
Set to not build or install
.Xr ftp 1
and
.Xr ftpd 8 .
.It Va WITHOUT_GAMES
Set to not build games.
.It Va WITHOUT_GCC
Set to not build and install gcc and g++ as part of the normal build process.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386 and riscv/riscv64.
.It Va WITH_GCC
Set to build and install gcc and g++.
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITHOUT_GCC_BOOTSTRAP
Set to not build gcc and g++ as part of the bootstrap process.
You must enable either gcc or clang bootstrap to be able to build the system,
unless an alternative compiler is provided via
XCC.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386 and riscv/riscv64.
.It Va WITH_GCC_BOOTSTRAP
Set to build gcc and g++ as part of the bootstrap process.
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITHOUT_GCOV
Set to not build the
.Xr gcov 1
tool.
.It Va WITHOUT_GDB
Set to not build
.Xr gdb 1 .
.Pp
This is a default setting on
arm64/aarch64 and riscv/riscv64.
.It Va WITH_GDB
Set to build
.Xr gdb 1 .
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITHOUT_GDB_LIBEXEC
Set to install
.Xr gdb 1
into
.Pa /usr/bin .
.Pp
This is a default setting on
sparc64/sparc64.
.It Va WITH_GDB_LIBEXEC
Set to install
.Xr gdb 1
into
.Pa /usr/libexec .
This permits
.Xr gdb 1
to be used as a fallback for
.Xr crashinfo 8
if a newer version is not installed.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and riscv/riscv64.
.It Va WITHOUT_GNUCXX
Do not build the GNU C++ stack (g++, libstdc++).
This is the default on platforms where clang is the system compiler.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64 and i386/i386.
.It Va WITH_GNUCXX
Build the GNU C++ stack (g++, libstdc++).
This is the default on platforms where gcc is the system compiler.
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITHOUT_GNU_DIFF
Set to not build GNU
.Xr diff 1
and
.Xr diff3 1 .
.It Va WITHOUT_GNU_GREP
Set to not build GNU
.Xr grep 1 .
.It Va WITH_GNU_GREP_COMPAT
Set this option to include GNU extensions in
.Xr bsdgrep 1
by linking against libgnuregex.
.It Va WITHOUT_GPIO
Set to not build
.Xr gpioctl 8
as part of the base system.
.It Va WITHOUT_GPL_DTC
Set to build the BSD licensed version of the device tree compiler rather
than the GPLed one from elinux.org.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64 and i386/i386.
.It Va WITH_GPL_DTC
Set to build the GPL'd version of the device tree compiler from elinux.org,
instead of the BSD licensed one.
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITHOUT_GSSAPI
Set to not build libgssapi.
.It Va WITHOUT_HAST
Set to not build
.Xr hastd 8
and related utilities.
.It Va WITH_HESIOD
Set to build Hesiod support.
.It Va WITHOUT_HTML
Set to not build HTML docs.
.It Va WITHOUT_HYPERV
Set to not build or install HyperV utilities.
.Pp
This is a default setting on
arm/arm, arm/armv6, arm/armv7, arm64/aarch64, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_HYPERV
Set to build or install HyperV utilities.
.Pp
This is a default setting on
amd64/amd64 and i386/i386.
.It Va WITHOUT_ICONV
Set to not build iconv as part of libc.
.It Va WITHOUT_INCLUDES
Set to not install header files.
This option used to be spelled
.Va NO_INCS .
.Bf -symbolic
The option does not work for build targets.
.Ef
.It Va WITHOUT_INET
Set to not build programs and libraries related to IPv4 networking.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_INET_SUPPORT
.El
.It Va WITHOUT_INET6
Set to not build
programs and libraries related to IPv6 networking.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_INET6_SUPPORT
.El
.It Va WITHOUT_INET6_SUPPORT
Set to build libraries, programs, and kernel modules without IPv6 support.
.It Va WITHOUT_INETD
Set to not build
.Xr inetd 8 .
.It Va WITHOUT_INET_SUPPORT
Set to build libraries, programs, and kernel modules without IPv4 support.
.It Va WITHOUT_INSTALLLIB
Set this to not install optional libraries.
For example, when creating a
.Xr nanobsd 8
image.
.Bf -symbolic
The option does not work for build targets.
.Ef
.It Va WITH_INSTALL_AS_USER
Set to make install targets succeed for non-root users by installing
files with owner and group attributes set to that of the user running
the
.Xr make 1
command.
The user still must set the
.Va DESTDIR
variable to point to a directory where the user has write permissions.
.It Va WITHOUT_IPFILTER
Set to not build IP Filter package.
.It Va WITHOUT_IPFW
Set to not build IPFW tools.
.It Va WITHOUT_IPSEC_SUPPORT
Set to not build the kernel with
.Xr ipsec 4
support.
This option is needed for
.Xr ipsec 4
and
.Xr tcpmd5 4 .
.It Va WITHOUT_ISCSI
Set to not build
.Xr iscsid 8
and related utilities.
.It Va WITHOUT_JAIL
Set to not build tools for the support of jails; e.g.,
.Xr jail 8 .
.It Va WITHOUT_KDUMP
Set to not build
.Xr kdump 1
and
.Xr truss 1 .
.It Va WITHOUT_KERBEROS
Set this to not build Kerberos 5 (KTH Heimdal).
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_GSSAPI
(unless
.Va WITH_GSSAPI
is set explicitly)
.It Va WITHOUT_KERBEROS_SUPPORT
(unless
.Va WITH_KERBEROS_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_KERBEROS_SUPPORT
Set to build some programs without Kerberos support, like
.Xr ssh 1 ,
.Xr telnet 1 ,
.Xr sshd 8 ,
and
.Xr telnetd 8 .
.It Va WITH_KERNEL_RETPOLINE
Set to enable the "retpoline" mitigation for CVE-2017-5715 in the kernel
build.
.It Va WITHOUT_KERNEL_SYMBOLS
Set to not install kernel symbol files.
.Bf -symbolic
This option is recommended for those people who have small root partitions.
.Ef
.It Va WITHOUT_KVM
Set to not build the
.Nm libkvm
library as a part of the base system.
.Bf -symbolic
The option has no effect yet.
.Ef
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_KVM_SUPPORT
(unless
.Va WITH_KVM_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_KVM_SUPPORT
Set to build some programs without optional
.Nm libkvm
support.
.It Va WITHOUT_LDNS
Setting this variable will prevent the LDNS library from being built.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_LDNS_UTILS
.It
.Va WITHOUT_UNBOUND
.El
.It Va WITHOUT_LDNS_UTILS
Setting this variable will prevent building the LDNS utilities
.Xr drill 1
and
.Xr host 1 .
.It Va WITHOUT_LEGACY_CONSOLE
Set to not build programs that support a legacy PC console; e.g.,
.Xr kbdcontrol 1
and
.Xr vidcontrol 1 .
.It Va WITHOUT_LIB32
On 64-bit platforms, set to not build 32-bit library set and a
.Nm ld-elf32.so.1
runtime linker.
.It Va WITHOUT_LIBCPLUSPLUS
Set to avoid building libcxxrt and libc++.
.It Va WITHOUT_LIBPTHREAD
Set to not build the
.Nm libpthread
providing library,
.Nm libthr .
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_LIBTHR
.El
.It Va WITH_LIBSOFT
On armv6 only, set to enable soft float ABI compatibility libraries.
This option is for transitioning to the new hard float ABI.
.It Va WITHOUT_LIBTHR
Set to not build the
.Nm libthr
(1:1 threading)
library.
.It Va WITHOUT_LLD
Set to not build LLVM's lld linker.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLD
Set to build LLVM's lld linker.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LLDB
Set to not build the LLDB debugger.
.Pp
This is a default setting on
arm/arm, arm/armv6, arm/armv7, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLDB
Set to build the LLDB debugger.
.Pp
This is a default setting on
amd64/amd64, arm64/aarch64 and i386/i386.
.It Va WITHOUT_LLD_BOOTSTRAP
Set to not build the LLD linker during the bootstrap phase of
the build.
To be able to build the system, either Binutils or LLD bootstrap must be
enabled unless an alternate linker is provided via XLD.
.Pp
This is a default setting on
arm/arm, arm/armv6, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLD_BOOTSTRAP
Set to build the LLD linker during the bootstrap phase of the build,
and use it during buildworld and buildkernel.
.Pp
This is a default setting on
amd64/amd64, arm/armv7, arm64/aarch64 and i386/i386.
.It Va WITHOUT_LLD_IS_LD
Set to use GNU binutils ld as the system linker, instead of LLVM's LLD.
.Pp
This is a default setting on
arm/arm, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLD_IS_LD
Set to use LLVM's LLD as the system linker, instead of GNU binutils ld.
.Pp
This is a default setting on
amd64/amd64, arm/armv7 and arm64/aarch64.
.It Va WITHOUT_LLVM_COV
Set to not build the
.Xr llvm-cov 1
tool.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLVM_COV
Set to build the
.Xr llvm-cov 1
tool.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LLVM_LIBUNWIND
Set to use GCC's stack unwinder (instead of LLVM's libunwind).
.Pp
This is a default setting on
arm/arm, arm/armv6, arm/armv7, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITH_LLVM_LIBUNWIND
Set to use LLVM's libunwind stack unwinder (instead of GCC's unwinder).
.Pp
This is a default setting on
amd64/amd64, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf and riscv/riscv64.
.It Va WITHOUT_LLVM_TARGET_AARCH64
Set to not build LLVM target support for AArch64.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLVM_TARGET_AARCH64
Set to build LLVM target support for AArch64.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LLVM_TARGET_ALL
Set to only build the required LLVM target support.
This option is preferred to specific target support options.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_LLVM_TARGET_AARCH64
(unless
.Va WITH_LLVM_TARGET_AARCH64
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_ARM
(unless
.Va WITH_LLVM_TARGET_ARM
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_MIPS
(unless
.Va WITH_LLVM_TARGET_MIPS
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_POWERPC
(unless
.Va WITH_LLVM_TARGET_POWERPC
is set explicitly)
.It Va WITHOUT_LLVM_TARGET_SPARC
(unless
.Va WITH_LLVM_TARGET_SPARC
is set explicitly)
.El
.It Va WITH_LLVM_TARGET_ALL
Set to build support for all LLVM targets.
This option is always applied to the bootstrap compiler for buildworld when
LLVM is used.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LLVM_TARGET_ARM
Set to not build LLVM target support for ARM.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLVM_TARGET_ARM
Set to build LLVM target support for ARM.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITH_LLVM_TARGET_BPF
Set to build LLVM target support for BPF.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.It Va WITHOUT_LLVM_TARGET_MIPS
Set to not build LLVM target support for MIPS.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLVM_TARGET_MIPS
Set to build LLVM target support for MIPS.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LLVM_TARGET_POWERPC
Set to not build LLVM target support for PowerPC.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLVM_TARGET_POWERPC
Set to build LLVM target support for PowerPC.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LLVM_TARGET_SPARC
Set to not build LLVM target support for SPARC.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLVM_TARGET_SPARC
Set to build LLVM target support for SPARC.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LLVM_TARGET_X86
Set to not build LLVM target support for X86.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LLVM_TARGET_X86
Set to build LLVM target support for X86.
The
.Va LLVM_TARGET_ALL
option should be used rather than this in most cases.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITH_LOADER_FIREWIRE
Enable firewire support in /boot/loader on x86. This option is a nop
on all other platforms.
.It Va WITH_LOADER_FORCE_LE
Set to force the powerpc boot loader to launch the kernel in little
endian mode.
.It Va WITHOUT_LOADER_GELI
Disable inclusion of GELI crypto support in the boot chain binaries.
.Pp
This is a default setting on
powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITH_LOADER_GELI
Set to build GELI bootloader support.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf and riscv/riscv64.
.It Va WITHOUT_LOADER_LUA
Set to not build LUA bindings for the boot loader.
.Pp
This is a default setting on
powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITH_LOADER_LUA
Set to build LUA bindings for the boot loader.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf and riscv/riscv64.
.It Va WITHOUT_LOADER_OFW
Disable building of openfirmware bootloader components.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf and riscv/riscv64.
.It Va WITH_LOADER_OFW
Set to build openfirmware bootloader components.
.Pp
This is a default setting on
powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe and sparc64/sparc64.
.It Va WITHOUT_LOADER_UBOOT
Disable building of ubldr.
.Pp
This is a default setting on
amd64/amd64, arm64/aarch64, i386/i386, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_LOADER_UBOOT
Set to build ubldr.
.Pp
This is a default setting on
arm/arm, arm/armv6, arm/armv7, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpcspe.
.It Va WITHOUT_LOCALES
Set to not build localization files; see
.Xr locale 1 .
.It Va WITHOUT_LOCATE
Set to not build
.Xr locate 1
and related programs.
.It Va WITHOUT_LPR
Set to not build
.Xr lpr 1
and related programs.
.It Va WITHOUT_LS_COLORS
Set to build
.Xr ls 1
without support for colors to distinguish file types.
.It Va WITHOUT_LZMA_SUPPORT
Set to build some programs without optional lzma compression support.
.It Va WITHOUT_MAIL
Set to not build any mail support (MUA or MTA).
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_DMAGENT
.It
.Va WITHOUT_MAILWRAPPER
.It
.Va WITHOUT_SENDMAIL
.El
.It Va WITHOUT_MAILWRAPPER
Set to not build the
.Xr mailwrapper 8
MTA selector.
.It Va WITHOUT_MAKE
Set to not install
.Xr make 1
and related support files.
.It Va WITHOUT_MAKE_CHECK_USE_SANDBOX
Set to not execute
.Dq Li "make check"
in limited sandbox mode.
This option should be paired with
.Va WITH_INSTALL_AS_USER
if executed as an unprivileged user.
See
.Xr tests 7
for more details.
.It Va WITHOUT_MAN
Set to not build manual pages.
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_MAN_UTILS
(unless
.Va WITH_MAN_UTILS
is set explicitly)
.El
.It Va WITHOUT_MANCOMPRESS
Set to not to install compressed man pages.
Only the uncompressed versions will be installed.
.It Va WITHOUT_MAN_UTILS
Set to not build utilities for manual pages,
.Xr apropos 1 ,
.Xr makewhatis 1 ,
.Xr man 1 ,
.Xr whatis 1 ,
.Xr manctl 8 ,
and related support files.
.It Va WITH_META_MODE
Create
.Xr make 1
meta files when building, which can provide a reliable incremental build when
using
.Xr filemon 4 .
The meta file is created in OBJDIR as
.Pa target.meta .
These meta files track the command that was executed, its output, and the
current directory.
The
.Xr filemon 4
module is required unless
.Va NO_FILEMON
is defined.
When the module is loaded, any files used by the commands executed are
tracked as dependencies for the target in its meta file.
The target is considered out-of-date and rebuilt if any of these
conditions are true compared to the last build:
.Bl -bullet -compact
.It
The command to execute changes.
.It
The current working directory changes.
.It
The target's meta file is missing.
.It
The target's meta file is missing filemon data when filemon is loaded
and a previous run did not have it loaded.
.It
[requires
.Xr filemon 4 ]
Files read, executed or linked to are newer than the target.
.It
[requires
.Xr filemon 4 ]
Files read, written, executed or linked are missing.
.El
The meta files can also be useful for debugging.
.Pp
The build hides commands that are executed unless
.Va NO_SILENT
is defined.
Errors cause
.Xr make 1
to show some of its environment for further debugging.
.Pp
The build operates as it normally would otherwise.
This option originally invoked a different build system but that was renamed
to
.Va WITH_DIRDEPS_BUILD .
.Pp
This must be set in the environment, make command line, or
.Pa /etc/src-env.conf ,
not
.Pa /etc/src.conf .
.It Va WITHOUT_MLX5TOOL
Set to not build
.Xr mlx5tool 8
.Pp
This is a default setting on
arm/arm, arm/armv6, arm/armv7, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpcspe and riscv/riscv64.
.It Va WITH_MLX5TOOL
Set to build
.Xr mlx5tool 8
.Pp
This is a default setting on
amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc64 and sparc64/sparc64.
.It Va WITH_MODULE_DRM
Enable creation of old drm video modules.
.It Va WITH_MODULE_DRM2
Enable creation of old drm2 video modules.
.It Va WITH_NAND
Set to build the NAND Flash components.
.It Va WITHOUT_NDIS
Set to not build programs and libraries
related to NDIS emulation support.
.It Va WITHOUT_NETCAT
Set to not build
.Xr nc 1
utility.
.It Va WITHOUT_NETGRAPH
Set to not build applications to support
.Xr netgraph 4 .
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_ATM
.It
.Va WITHOUT_BLUETOOTH
.El
.Pp
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_NETGRAPH_SUPPORT
(unless
.Va WITH_NETGRAPH_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_NETGRAPH_SUPPORT
Set to build libraries, programs, and kernel modules without netgraph support.
.It Va WITHOUT_NIS
Set to not build
.Xr NIS 8
support and related programs.
If set, you might need to adopt your
.Xr nsswitch.conf 5
and remove
.Sq nis
entries.
.It Va WITHOUT_NLS
Set to not build NLS catalogs.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_NLS_CATALOGS
.El
.It Va WITHOUT_NLS_CATALOGS
Set to not build NLS catalog support for
.Xr csh 1 .
.It Va WITHOUT_NS_CACHING
Set to disable name caching in the
.Pa nsswitch
subsystem.
The generic caching daemon,
.Xr nscd 8 ,
will not be built either if this option is set.
.It Va WITHOUT_NTP
Set to not build
.Xr ntpd 8
and related programs.
.It Va WITHOUT_NVME
Set to not build nvme related tools and kernel modules.
.Pp
This is a default setting on
arm/arm, arm/armv6, arm/armv7, arm64/aarch64, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf, mips/mips64hf, powerpc/powerpc, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_NVME
Set to build nvme related tools and kernel modules.

.Pp
This is a default setting on
amd64/amd64, i386/i386 and powerpc/powerpc64.
.It Va WITH_OFED
Set to build the
.Dq "OpenFabrics Enterprise Distribution"
Infiniband software stack.
.It Va WITH_OFED_EXTRA
Set to build the non-essential components of the
.Dq "OpenFabrics Enterprise Distribution"
Infiniband software stack, mostly examples.
.It Va WITH_OPENLDAP
Enable building openldap support for kerberos.
.It Va WITHOUT_OPENSSH
Set to not build OpenSSH.
.It Va WITHOUT_OPENSSL
Set to not build OpenSSL.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_KERBEROS
.It
.Va WITHOUT_OPENSSH
.El
.Pp
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_GSSAPI
(unless
.Va WITH_GSSAPI
is set explicitly)
.El
.It Va WITHOUT_PAM
Set to not build PAM library and modules.
.Bf -symbolic
This option is deprecated and does nothing.
.Ef
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_PAM_SUPPORT
(unless
.Va WITH_PAM_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_PAM_SUPPORT
Set to build some programs without PAM support, particularly
.Xr ftpd 8
and
.Xr ppp 8 .
.It Va WITHOUT_PC_SYSINSTALL
Set to not build
.Xr pc-sysinstall 8
and related programs.
.It Va WITHOUT_PF
Set to not build PF firewall package.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_AUTHPF
.El
.It Va WITHOUT_PKGBOOTSTRAP
Set to not build
.Xr pkg 7
bootstrap tool.
.It Va WITHOUT_PMC
Set to not build
.Xr pmccontrol 8
and related programs.
.It Va WITHOUT_PORTSNAP
Set to not build or install
.Xr portsnap 8
and related files.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_FREEBSD_UPDATE
.El
.It Va WITHOUT_PPP
Set to not build
.Xr ppp 8
and related programs.
.It Va WITHOUT_PROFILE
Set to not build profiled libraries for use with
.Xr gprof 8 .
.Pp
This is a default setting on
mips/mips64el, mips/mips64, mips/mips64elhf and mips/mips64hf.
.It Va WITH_PROFILE
Set to build profiled libraries for use with
.Xr gprof 8 .
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mipsn32, mips/mipselhf, mips/mipshf, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITHOUT_QUOTAS
Set to not build
.Xr quota 1
and related programs.
.It Va WITHOUT_RADIUS_SUPPORT
Set to not build radius support into various applications, like
.Xr pam_radius 8
and
.Xr ppp 8 .
.It Va WITH_RATELIMIT
Set to build the system with rate limit support.
.Pp
This makes
.Dv SO_MAX_PACING_RATE
effective in
.Xr getsockopt 2 ,
and
.Ar txrlimit
support in
.Xr ifconfig 8 ,
by proxy.
.It Va WITHOUT_RBOOTD
Set to not build or install
.Xr rbootd 8 .
.It Va WITHOUT_REPRODUCIBLE_BUILD
Set to include build metadata (such as the build time, user, and host)
in the kernel, boot loaders, and uname output.
Successive builds will not be bit-for-bit identical.
.It Va WITHOUT_RESCUE
Set to not build
.Xr rescue 8 .
.It Va WITH_RETPOLINE
Set to build the base system with the retpoline speculative execution
vulnerability mitigation for CVE-2017-5715.
.It Va WITHOUT_ROUTED
Set to not build
.Xr routed 8
utility.
.It Va WITH_RPCBIND_WARMSTART_SUPPORT
Set to build
.Xr rpcbind 8
with warmstart support.
.It Va WITHOUT_SENDMAIL
Set to not build
.Xr sendmail 8
and related programs.
.It Va WITHOUT_SERVICESDB
Set to not install
.Pa /var/db/services.db .
.It Va WITHOUT_SETUID_LOGIN
Set this to disable the installation of
.Xr login 1
as a set-user-ID root program.
.It Va WITHOUT_SHAREDOCS
Set to not build the
.Bx 4.4
legacy docs.
.It Va WITH_SHARED_TOOLCHAIN
Set to build the toolchain binaries shared.
The set includes
.Xr cc 1 ,
.Xr make 1
and necessary utilities like assembler, linker and library archive manager.
.It Va WITH_SORT_THREADS
Set to enable threads in
.Xr sort 1 .
.It Va WITHOUT_SOURCELESS
Set to not build kernel modules that include sourceless code (either microcode or native code for host CPU).
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_SOURCELESS_HOST
.It
.Va WITHOUT_SOURCELESS_UCODE
.El
.It Va WITHOUT_SOURCELESS_HOST
Set to not build kernel modules that include sourceless native code for host CPU.
.It Va WITHOUT_SOURCELESS_UCODE
Set to not build kernel modules that include sourceless microcode.
.It Va WITHOUT_SSP
Set to not build world with propolice stack smashing protection.
.Pp
This is a default setting on
mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, mips/mipselhf, mips/mipshf, mips/mips64elhf and mips/mips64hf.
.It Va WITH_SSP
Set to build world with propolice stack smashing protection.
.Pp
This is a default setting on
amd64/amd64, arm/arm, arm/armv6, arm/armv7, arm64/aarch64, i386/i386, powerpc/powerpc, powerpc/powerpc64, powerpc/powerpcspe, riscv/riscv64 and sparc64/sparc64.
.It Va WITH_STAGING
Enable staging of files to a stage tree.
This can be best thought of as auto-install to
.Va DESTDIR
with some extra meta data to ensure dependencies can be tracked.
Depends on
.Va WITH_DIRDEPS_BUILD .
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITH_STAGING_MAN
(unless
.Va WITHOUT_STAGING_MAN
is set explicitly)
.It Va WITH_STAGING_PROG
(unless
.Va WITHOUT_STAGING_PROG
is set explicitly)
.El
.Pp
This must be set in the environment, make command line, or
.Pa /etc/src-env.conf ,
not
.Pa /etc/src.conf .
.It Va WITH_STAGING_MAN
Enable staging of man pages to stage tree.
.It Va WITH_STAGING_PROG
Enable staging of PROGs to stage tree.
.It Va WITH_STALE_STAGED
Check staged files are not stale.
.It Va WITH_SVN
Set to install
.Xr svnlite 1
as
.Xr svn 1 .
.It Va WITHOUT_SVNLITE
Set to not build
.Xr svnlite 1
and related programs.
.It Va WITHOUT_SYMVER
Set to disable symbol versioning when building shared libraries.
.It Va WITHOUT_SYSCONS
Set to not build
.Xr syscons 4
support files such as keyboard maps, fonts, and screen output maps.
.It Va WITH_SYSROOT
Enable use of sysroot during build.
Depends on
.Va WITH_DIRDEPS_BUILD .
.Pp
This must be set in the environment, make command line, or
.Pa /etc/src-env.conf ,
not
.Pa /etc/src.conf .
.It Va WITHOUT_SYSTEM_COMPILER
Set to not opportunistically skip building a cross-compiler during the
bootstrap phase of the build.
Normally, if the currently installed compiler matches the planned bootstrap
compiler type and revision, then it will not be built.
This does not prevent a compiler from being built for installation though,
only for building one for the build itself.
The
.Va WITHOUT_CLANG
and
.Va WITHOUT_GCC
options control those.
.It Va WITHOUT_SYSTEM_LINKER
Set to not opportunistically skip building a cross-linker during the
bootstrap phase of the build.
Normally, if the currently installed linker matches the planned bootstrap
linker type and revision, then it will not be built.
This does not prevent a linker from being built for installation though,
only for building one for the build itself.
The
.Va WITHOUT_LLD
and
.Va WITHOUT_BINUTILS
options control those.
.Pp
This option is only relevant when
.Va WITH_LLD_BOOTSTRAP
is set.
.It Va WITHOUT_TALK
Set to not build or install
.Xr talk 1
and
.Xr talkd 8 .
.It Va WITHOUT_TCP_WRAPPERS
Set to not build or install
.Xr tcpd 8 ,
and related utilities.
.It Va WITHOUT_TCSH
Set to not build and install
.Pa /bin/csh
(which is
.Xr tcsh 1 ) .
.It Va WITHOUT_TELNET
Set to not build
.Xr telnet 1
and related programs.
.It Va WITHOUT_TESTS
Set to not build nor install the
.Fx
Test Suite in
.Pa /usr/tests/ .
See
.Xr tests 7
for more details.
This also disables the build of all test-related dependencies, including ATF.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_DTRACE_TESTS
.El
.Pp
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_TESTS_SUPPORT
(unless
.Va WITH_TESTS_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_TESTS_SUPPORT
Set to disables the build of all test-related dependencies, including ATF.
.It Va WITHOUT_TEXTPROC
Set to not build
programs used for text processing.
.It Va WITHOUT_TFTP
Set to not build or install
.Xr tftp 1
and
.Xr tftpd 8 .
.It Va WITHOUT_TIMED
Set to not build or install
.Xr timed 8 .
.It Va WITHOUT_TOOLCHAIN
Set to not install header or
programs used for program development,
compilers, debuggers etc.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_BINUTILS
.It
.Va WITHOUT_CLANG
.It
.Va WITHOUT_CLANG_EXTRAS
.It
.Va WITHOUT_CLANG_FULL
.It
.Va WITHOUT_GCC
.It
.Va WITHOUT_GDB
.It
.Va WITHOUT_INCLUDES
.It
.Va WITHOUT_LLD
.It
.Va WITHOUT_LLDB
.It
.Va WITHOUT_LLVM_COV
.El
.It Va WITHOUT_UNBOUND
Set to not build
.Xr unbound 8
and related programs.
.It Va WITHOUT_UNIFIED_OBJDIR
Set to use the historical object directory format for
.Xr build 7
targets.
For native-builds and builds done directly in sub-directories the format of
.Pa ${MAKEOBJDIRPREFIX}/${.CURDIR}
is used,
while for cross-builds
.Pa ${MAKEOBJDIRPREFIX}/${TARGET}.${TARGET_ARCH}/${.CURDIR}
is used.
.Pp
This option is transitional and will be removed before the 12.0 release,
at which time
.va WITH_UNIFIED_OBJDIR
will be enabled permanently.
.Pp
This must be set in the environment, make command line, or
.Pa /etc/src-env.conf ,
not
.Pa /etc/src.conf .
.It Va WITHOUT_USB
Set to not build USB-related programs and libraries.
.It Va WITHOUT_USB_GADGET_EXAMPLES
Set to not build USB gadget kernel modules.
.It Va WITHOUT_UTMPX
Set to not build user accounting tools such as
.Xr last 1 ,
.Xr users 1 ,
.Xr who 1 ,
.Xr ac 8 ,
.Xr lastlogin 8
and
.Xr utx 8 .
.It Va WITHOUT_VI
Set to not build and install vi, view, ex and related programs.
.It Va WITHOUT_VT
Set to not build
.Xr vt 4
support files (fonts and keymaps).
.It Va WITHOUT_WARNS
Set this to not add warning flags to the compiler invocations.
Useful as a temporary workaround when code enters the tree
which triggers warnings in environments that differ from the
original developer.
.It Va WITHOUT_WIRELESS
Set to not build programs used for 802.11 wireless networks; especially
.Xr wpa_supplicant 8
and
.Xr hostapd 8 .
When set, these options are also in effect:
.Pp
.Bl -inset -compact
.It Va WITHOUT_WIRELESS_SUPPORT
(unless
.Va WITH_WIRELESS_SUPPORT
is set explicitly)
.El
.It Va WITHOUT_WIRELESS_SUPPORT
Set to build libraries, programs, and kernel modules without
802.11 wireless support.
.It Va WITHOUT_WPA_SUPPLICANT_EAPOL
Build
.Xr wpa_supplicant 8
without support for the IEEE 802.1X protocol and without
support for EAP-PEAP, EAP-TLS, EAP-LEAP, and EAP-TTLS
protocols (usable only via 802.1X).
.It Va WITHOUT_ZFS
Set to not build ZFS file system.
.It Va WITHOUT_ZONEINFO
Set to not build the timezone database.
When set, it enforces these options:
.Pp
.Bl -item -compact
.It
.Va WITHOUT_ZONEINFO_LEAPSECONDS_SUPPORT
.It
.Va WITHOUT_ZONEINFO_OLD_TIMEZONES_SUPPORT
.El
.It Va WITH_ZONEINFO_LEAPSECONDS_SUPPORT
Set to build leapsecond information in to the timezone database.
.It Va WITH_ZONEINFO_OLD_TIMEZONES_SUPPORT
Set to build backward compatibility timezone aliases in to the timezone
database.
.El
.Sh FILES
.Bl -tag -compact -width Pa
.It Pa /etc/src.conf
.It Pa /etc/src-env.conf
.It Pa /usr/share/mk/bsd.own.mk
.El
.Sh SEE ALSO
.Xr make 1 ,
.Xr make.conf 5 ,
.Xr build 7 ,
.Xr ports 7
.Sh HISTORY
The
.Nm
file appeared in
.Fx 7.0 .
.Sh AUTHORS
This manual page was autogenerated by
.An tools/build/options/makeman .