/*- * Copyright (c) 2006 Marcel Moolenaar * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * PCI "universal" communications card driver configuration data (used to * match/attach the cards). */ #include #include #include #include #include #include #include #include #include #include #include static puc_config_f puc_config_amc; static puc_config_f puc_config_cronyx; static puc_config_f puc_config_diva; static puc_config_f puc_config_icbook; static puc_config_f puc_config_quatech; static puc_config_f puc_config_syba; static puc_config_f puc_config_siig; static puc_config_f puc_config_timedia; static puc_config_f puc_config_titan; const struct puc_cfg puc_pci_devices[] = { { 0x0009, 0x7168, 0xffff, 0, "Sunix SUN1889", DEFAULT_RCLK * 8, PUC_PORT_2S, 0x10, 0, 8, }, { 0x103c, 0x1048, 0x103c, 0x1049, "HP Diva Serial [GSP] Multiport UART - Tosca Console", DEFAULT_RCLK, PUC_PORT_3S, 0x10, 0, -1, .config_function = puc_config_diva }, { 0x103c, 0x1048, 0x103c, 0x104a, "HP Diva Serial [GSP] Multiport UART - Tosca Secondary", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 0, -1, .config_function = puc_config_diva }, { 0x103c, 0x1048, 0x103c, 0x104b, "HP Diva Serial [GSP] Multiport UART - Maestro SP2", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 0, -1, .config_function = puc_config_diva }, { 0x103c, 0x1048, 0x103c, 0x1223, "HP Diva Serial [GSP] Multiport UART - Superdome Console", DEFAULT_RCLK, PUC_PORT_3S, 0x10, 0, -1, .config_function = puc_config_diva }, { 0x103c, 0x1048, 0x103c, 0x1226, "HP Diva Serial [GSP] Multiport UART - Keystone SP2", DEFAULT_RCLK, PUC_PORT_3S, 0x10, 0, -1, .config_function = puc_config_diva }, { 0x103c, 0x1048, 0x103c, 0x1282, "HP Diva Serial [GSP] Multiport UART - Everest SP2", DEFAULT_RCLK, PUC_PORT_3S, 0x10, 0, -1, .config_function = puc_config_diva }, { 0x10b5, 0x1076, 0x10b5, 0x1076, "VScom PCI-800", DEFAULT_RCLK * 8, PUC_PORT_8S, 0x18, 0, 8, }, { 0x10b5, 0x1077, 0x10b5, 0x1077, "VScom PCI-400", DEFAULT_RCLK * 8, PUC_PORT_4S, 0x18, 0, 8, }, { 0x10b5, 0x1103, 0x10b5, 0x1103, "VScom PCI-200", DEFAULT_RCLK * 8, PUC_PORT_2S, 0x18, 4, 0, }, /* * Boca Research Turbo Serial 658 (8 serial port) card. * Appears to be the same as Chase Research PLC PCI-FAST8 * and Perle PCI-FAST8 Multi-Port serial cards. */ { 0x10b5, 0x9050, 0x12e0, 0x0021, "Boca Research Turbo Serial 658", DEFAULT_RCLK * 4, PUC_PORT_8S, 0x18, 0, 8, }, { 0x10b5, 0x9050, 0x12e0, 0x0031, "Boca Research Turbo Serial 654", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x18, 0, 8, }, /* * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with * a seemingly-lame EEPROM setup that puts the Dolphin IDs * into the subsystem fields, and claims that it's a * network/misc (0x02/0x80) device. */ { 0x10b5, 0x9050, 0xd84d, 0x6808, "Dolphin Peripherals 4035", DEFAULT_RCLK, PUC_PORT_2S, 0x18, 4, 0, }, /* * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with * a seemingly-lame EEPROM setup that puts the Dolphin IDs * into the subsystem fields, and claims that it's a * network/misc (0x02/0x80) device. */ { 0x10b5, 0x9050, 0xd84d, 0x6810, "Dolphin Peripherals 4014", 0, PUC_PORT_2P, 0x20, 4, 0, }, { 0x10e8, 0x818e, 0xffff, 0, "Applied Micro Circuits 8 Port UART", DEFAULT_RCLK, PUC_PORT_8S, 0x14, -1, -1, .config_function = puc_config_amc }, { 0x11fe, 0x8010, 0xffff, 0, "Comtrol RocketPort 550/8 RJ11 part A", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8011, 0xffff, 0, "Comtrol RocketPort 550/8 RJ11 part B", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8012, 0xffff, 0, "Comtrol RocketPort 550/8 Octa part A", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8013, 0xffff, 0, "Comtrol RocketPort 550/8 Octa part B", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8014, 0xffff, 0, "Comtrol RocketPort 550/4 RJ45", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8015, 0xffff, 0, "Comtrol RocketPort 550/Quad", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8016, 0xffff, 0, "Comtrol RocketPort 550/16 part A", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8017, 0xffff, 0, "Comtrol RocketPort 550/16 part B", DEFAULT_RCLK * 4, PUC_PORT_12S, 0x10, 0, 8, }, { 0x11fe, 0x8018, 0xffff, 0, "Comtrol RocketPort 550/8 part A", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, { 0x11fe, 0x8019, 0xffff, 0, "Comtrol RocketPort 550/8 part B", DEFAULT_RCLK * 4, PUC_PORT_4S, 0x10, 0, 8, }, /* * IBM SurePOS 300 Series (481033H) serial ports * Details can be found on the IBM RSS websites */ { 0x1014, 0x0297, 0xffff, 0, "IBM SurePOS 300 Series (481033H) serial ports", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0 }, /* * SIIG Boards. * * SIIG provides documentation for their boards at: * */ { 0x131f, 0x1010, 0xffff, 0, "SIIG Cyber I/O PCI 16C550 (10x family)", DEFAULT_RCLK, PUC_PORT_1S1P, 0x18, 4, 0, }, { 0x131f, 0x1011, 0xffff, 0, "SIIG Cyber I/O PCI 16C650 (10x family)", DEFAULT_RCLK, PUC_PORT_1S1P, 0x18, 4, 0, }, { 0x131f, 0x1012, 0xffff, 0, "SIIG Cyber I/O PCI 16C850 (10x family)", DEFAULT_RCLK, PUC_PORT_1S1P, 0x18, 4, 0, }, { 0x131f, 0x1021, 0xffff, 0, "SIIG Cyber Parallel Dual PCI (10x family)", 0, PUC_PORT_2P, 0x18, 8, 0, }, { 0x131f, 0x1030, 0xffff, 0, "SIIG Cyber Serial Dual PCI 16C550 (10x family)", DEFAULT_RCLK, PUC_PORT_2S, 0x18, 4, 0, }, { 0x131f, 0x1031, 0xffff, 0, "SIIG Cyber Serial Dual PCI 16C650 (10x family)", DEFAULT_RCLK, PUC_PORT_2S, 0x18, 4, 0, }, { 0x131f, 0x1032, 0xffff, 0, "SIIG Cyber Serial Dual PCI 16C850 (10x family)", DEFAULT_RCLK, PUC_PORT_2S, 0x18, 4, 0, }, { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */ "SIIG Cyber 2S1P PCI 16C550 (10x family)", DEFAULT_RCLK, PUC_PORT_2S1P, 0x18, 4, 0, }, { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */ "SIIG Cyber 2S1P PCI 16C650 (10x family)", DEFAULT_RCLK, PUC_PORT_2S1P, 0x18, 4, 0, }, { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */ "SIIG Cyber 2S1P PCI 16C850 (10x family)", DEFAULT_RCLK, PUC_PORT_2S1P, 0x18, 4, 0, }, { 0x131f, 0x1050, 0xffff, 0, "SIIG Cyber 4S PCI 16C550 (10x family)", DEFAULT_RCLK, PUC_PORT_4S, 0x18, 4, 0, }, { 0x131f, 0x1051, 0xffff, 0, "SIIG Cyber 4S PCI 16C650 (10x family)", DEFAULT_RCLK, PUC_PORT_4S, 0x18, 4, 0, }, { 0x131f, 0x1052, 0xffff, 0, "SIIG Cyber 4S PCI 16C850 (10x family)", DEFAULT_RCLK, PUC_PORT_4S, 0x18, 4, 0, }, { 0x131f, 0x2010, 0xffff, 0, "SIIG Cyber I/O PCI 16C550 (20x family)", DEFAULT_RCLK, PUC_PORT_1S1P, 0x10, 4, 0, }, { 0x131f, 0x2011, 0xffff, 0, "SIIG Cyber I/O PCI 16C650 (20x family)", DEFAULT_RCLK, PUC_PORT_1S1P, 0x10, 4, 0, }, { 0x131f, 0x2012, 0xffff, 0, "SIIG Cyber I/O PCI 16C850 (20x family)", DEFAULT_RCLK, PUC_PORT_1S1P, 0x10, 4, 0, }, { 0x131f, 0x2021, 0xffff, 0, "SIIG Cyber Parallel Dual PCI (20x family)", 0, PUC_PORT_2P, 0x10, 8, 0, }, { 0x131f, 0x2030, 0xffff, 0, "SIIG Cyber Serial Dual PCI 16C550 (20x family)", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x131f, 0x2031, 0xffff, 0, "SIIG Cyber Serial Dual PCI 16C650 (20x family)", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x131f, 0x2032, 0xffff, 0, "SIIG Cyber Serial Dual PCI 16C850 (20x family)", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x131f, 0x2040, 0xffff, 0, "SIIG Cyber 2P1S PCI 16C550 (20x family)", DEFAULT_RCLK, PUC_PORT_1S2P, 0x10, -1, 0, .config_function = puc_config_siig }, { 0x131f, 0x2041, 0xffff, 0, "SIIG Cyber 2P1S PCI 16C650 (20x family)", DEFAULT_RCLK, PUC_PORT_1S2P, 0x10, -1, 0, .config_function = puc_config_siig }, { 0x131f, 0x2042, 0xffff, 0, "SIIG Cyber 2P1S PCI 16C850 (20x family)", DEFAULT_RCLK, PUC_PORT_1S2P, 0x10, -1, 0, .config_function = puc_config_siig }, { 0x131f, 0x2050, 0xffff, 0, "SIIG Cyber 4S PCI 16C550 (20x family)", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0, }, { 0x131f, 0x2051, 0xffff, 0, "SIIG Cyber 4S PCI 16C650 (20x family)", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0, }, { 0x131f, 0x2052, 0xffff, 0, "SIIG Cyber 4S PCI 16C850 (20x family)", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0, }, { 0x131f, 0x2060, 0xffff, 0, "SIIG Cyber 2S1P PCI 16C550 (20x family)", DEFAULT_RCLK, PUC_PORT_2S1P, 0x10, 4, 0, }, { 0x131f, 0x2061, 0xffff, 0, "SIIG Cyber 2S1P PCI 16C650 (20x family)", DEFAULT_RCLK, PUC_PORT_2S1P, 0x10, 4, 0, }, { 0x131f, 0x2062, 0xffff, 0, "SIIG Cyber 2S1P PCI 16C850 (20x family)", DEFAULT_RCLK, PUC_PORT_2S1P, 0x10, 4, 0, }, { 0x131f, 0x2081, 0xffff, 0, "SIIG PS8000 8S PCI 16C650 (20x family)", DEFAULT_RCLK, PUC_PORT_8S, 0x10, -1, -1, .config_function = puc_config_siig }, { 0x135c, 0x0010, 0xffff, 0, "Quatech QSC-100", -3, /* max 8x clock rate */ PUC_PORT_4S, 0x14, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x0020, 0xffff, 0, "Quatech DSC-100", -1, /* max 2x clock rate */ PUC_PORT_2S, 0x14, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x0030, 0xffff, 0, "Quatech DSC-200/300", -1, /* max 2x clock rate */ PUC_PORT_2S, 0x14, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x0040, 0xffff, 0, "Quatech QSC-200/300", -3, /* max 8x clock rate */ PUC_PORT_4S, 0x14, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x0050, 0xffff, 0, "Quatech ESC-100D", -3, /* max 8x clock rate */ PUC_PORT_8S, 0x14, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x0060, 0xffff, 0, "Quatech ESC-100M", -3, /* max 8x clock rate */ PUC_PORT_8S, 0x14, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x0170, 0xffff, 0, "Quatech QSCLP-100", -1, /* max 2x clock rate */ PUC_PORT_4S, 0x18, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x0180, 0xffff, 0, "Quatech DSCLP-100", -1, /* max 3x clock rate */ PUC_PORT_2S, 0x18, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x01b0, 0xffff, 0, "Quatech DSCLP-200/300", -1, /* max 2x clock rate */ PUC_PORT_2S, 0x18, 0, 8, .config_function = puc_config_quatech }, { 0x135c, 0x01e0, 0xffff, 0, "Quatech ESCLP-100", -3, /* max 8x clock rate */ PUC_PORT_8S, 0x10, 0, 8, .config_function = puc_config_quatech }, { 0x1393, 0x1040, 0xffff, 0, "Moxa Technologies, Smartio C104H/PCI", DEFAULT_RCLK * 8, PUC_PORT_4S, 0x18, 0, 8, }, { 0x1393, 0x1041, 0xffff, 0, "Moxa Technologies, Smartio CP-104UL/PCI", DEFAULT_RCLK * 8, PUC_PORT_4S, 0x18, 0, 8, }, { 0x1393, 0x1043, 0xffff, 0, "Moxa Technologies, Smartio CP-104EL/PCIe", DEFAULT_RCLK * 8, PUC_PORT_4S, 0x18, 0, 8, }, { 0x1393, 0x1141, 0xffff, 0, "Moxa Technologies, Industio CP-114", DEFAULT_RCLK * 8, PUC_PORT_4S, 0x18, 0, 8, }, { 0x1393, 0x1680, 0xffff, 0, "Moxa Technologies, C168H/PCI", DEFAULT_RCLK * 8, PUC_PORT_8S, 0x18, 0, 8, }, { 0x1393, 0x1681, 0xffff, 0, "Moxa Technologies, C168U/PCI", DEFAULT_RCLK * 8, PUC_PORT_8S, 0x18, 0, 8, }, { 0x1393, 0x1682, 0xffff, 0, "Moxa Technologies, CP-168EL/PCIe", DEFAULT_RCLK * 8, PUC_PORT_8S, 0x18, 0, 8, }, { 0x13a8, 0x0158, 0xffff, 0, "Cronyx Omega2-PCI", DEFAULT_RCLK * 8, PUC_PORT_8S, 0x10, 0, -1, .config_function = puc_config_cronyx }, { 0x1407, 0x0100, 0xffff, 0, "Lava Computers Dual Serial", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x1407, 0x0101, 0xffff, 0, "Lava Computers Quatro A", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x1407, 0x0102, 0xffff, 0, "Lava Computers Quatro B", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x1407, 0x0120, 0xffff, 0, "Lava Computers Quattro-PCI A", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x1407, 0x0121, 0xffff, 0, "Lava Computers Quattro-PCI B", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x1407, 0x0180, 0xffff, 0, "Lava Computers Octo A", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0, }, { 0x1407, 0x0181, 0xffff, 0, "Lava Computers Octo B", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0, }, { 0x1409, 0x7268, 0xffff, 0, "Sunix SUN1888", 0, PUC_PORT_2P, 0x10, 0, 8, }, { 0x1409, 0x7168, 0xffff, 0, NULL, DEFAULT_RCLK * 8, PUC_PORT_NONSTANDARD, 0x10, -1, -1, .config_function = puc_config_timedia }, /* * Boards with an Oxford Semiconductor chip. * * Oxford Semiconductor provides documentation for their chip at: * * * As sold by Kouwell . * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. */ { 0x1415, 0x9501, 0x131f, 0x2050, "SIIG Cyber 4 PCI 16550", DEFAULT_RCLK * 10, PUC_PORT_4S, 0x10, 0, 8, }, { 0x1415, 0x9501, 0x131f, 0x2051, "SIIG Cyber 4S PCI 16C650 (20x family)", DEFAULT_RCLK * 10, PUC_PORT_4S, 0x10, 0, 8, }, { 0x1415, 0x9501, 0xffff, 0, "Oxford Semiconductor OX16PCI954 UARTs", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 0, 8, }, { 0x1415, 0x950a, 0xffff, 0, "Oxford Semiconductor OX16PCI954 UARTs", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 0, 8, }, { 0x1415, 0x9511, 0xffff, 0, "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 0, 8, }, { 0x1415, 0x9521, 0xffff, 0, "Oxford Semiconductor OX16PCI952 UARTs", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x1415, 0x9538, 0xffff, 0, "Oxford Semiconductor OX16PCI958 UARTs", DEFAULT_RCLK * 10, PUC_PORT_8S, 0x18, 0, 8, }, { 0x14d2, 0x8010, 0xffff, 0, "VScom PCI-100L", DEFAULT_RCLK * 8, PUC_PORT_1S, 0x14, 0, 0, }, { 0x14d2, 0x8020, 0xffff, 0, "VScom PCI-200L", DEFAULT_RCLK * 8, PUC_PORT_2S, 0x14, 4, 0, }, { 0x14d2, 0x8028, 0xffff, 0, "VScom 200Li", DEFAULT_RCLK, PUC_PORT_2S, 0x20, 0, 8, }, /* * VScom (Titan?) PCI-800L. More modern variant of the * PCI-800. Uses 6 discrete 16550 UARTs, plus another * two of them obviously implemented as macro cells in * the ASIC. This causes the weird port access pattern * below, where two of the IO port ranges each access * one of the ASIC UARTs, and a block of IO addresses * access the external UARTs. */ { 0x14d2, 0x8080, 0xffff, 0, "Titan VScom PCI-800L", DEFAULT_RCLK * 8, PUC_PORT_8S, 0x14, -1, -1, .config_function = puc_config_titan }, /* * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has * device ID 3 and PCI device 1 device ID 4. */ { 0x14d2, 0xa003, 0xffff, 0, "Titan PCI-800H", DEFAULT_RCLK * 8, PUC_PORT_4S, 0x10, 0, 8, }, { 0x14d2, 0xa004, 0xffff, 0, "Titan PCI-800H", DEFAULT_RCLK * 8, PUC_PORT_4S, 0x10, 0, 8, }, { 0x14d2, 0xa005, 0xffff, 0, "Titan PCI-200H", DEFAULT_RCLK * 8, PUC_PORT_2S, 0x10, 0, 8, }, { 0x14d2, 0xe020, 0xffff, 0, "Titan VScom PCI-200HV2", DEFAULT_RCLK * 8, PUC_PORT_2S, 0x10, 4, 0, }, { 0x14db, 0x2130, 0xffff, 0, "Avlab Technology, PCI IO 2S", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x14db, 0x2150, 0xffff, 0, "Avlab Low Profile PCI 4 Serial", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0, }, { 0x14db, 0x2152, 0xffff, 0, "Avlab Low Profile PCI 4 Serial", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0, }, { 0x1592, 0x0781, 0xffff, 0, "Syba Tech Ltd. PCI-4S2P-550-ECP", DEFAULT_RCLK, PUC_PORT_4S1P, 0x10, 0, -1, .config_function = puc_config_syba }, { 0x6666, 0x0001, 0xffff, 0, "Decision Computer Inc, PCCOM 4-port serial", DEFAULT_RCLK, PUC_PORT_4S, 0x1c, 0, 8, }, { 0x6666, 0x0002, 0xffff, 0, "Decision Computer Inc, PCCOM 8-port serial", DEFAULT_RCLK, PUC_PORT_8S, 0x1c, 0, 8, }, { 0x6666, 0x0004, 0xffff, 0, "PCCOM dual port RS232/422/485", DEFAULT_RCLK, PUC_PORT_2S, 0x1c, 0, 8, }, { 0x9710, 0x9815, 0xffff, 0, "NetMos NM9815 Dual 1284 Printer port", 0, PUC_PORT_2P, 0x10, 8, 0, }, /* * This is more specific than the generic NM9835 entry that follows, and * is placed here to _prevent_ puc from claiming this single port card. * * uart(4) will claim this device. */ { 0x9710, 0x9835, 0x1000, 1, "NetMos NM9835 based 1-port serial", DEFAULT_RCLK, PUC_PORT_1S, 0x10, 4, 0, }, { 0x9710, 0x9835, 0x1000, 2, "NetMos NM9835 based 2-port serial", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x9710, 0x9835, 0xffff, 0, "NetMos NM9835 Dual UART and 1284 Printer port", DEFAULT_RCLK, PUC_PORT_2S1P, 0x10, 4, 0, }, { 0x9710, 0x9845, 0x1000, 0x0006, "NetMos NM9845 6 Port UART", DEFAULT_RCLK, PUC_PORT_6S, 0x10, 4, 0, }, { 0x9710, 0x9845, 0xffff, 0, "NetMos NM9845 Quad UART and 1284 Printer port", DEFAULT_RCLK, PUC_PORT_4S1P, 0x10, 4, 0, }, { 0x9710, 0x9865, 0xa000, 0x3002, "NetMos NM9865 Dual UART", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 4, 0, }, { 0x9710, 0x9865, 0xa000, 0x3003, "NetMos NM9865 Triple UART", DEFAULT_RCLK, PUC_PORT_3S, 0x10, 4, 0, }, { 0x9710, 0x9865, 0xa000, 0x3004, "NetMos NM9865 Quad UART", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 4, 0,0 }, { 0x9710, 0x9865, 0xa000, 0x3011, "NetMos NM9865 Single UART and 1284 Printer port", DEFAULT_RCLK, PUC_PORT_1S1P, 0x10, 4, 0, }, { 0x9710, 0x9865, 0xa000, 0x3012, "NetMos NM9865 Dual UART and 1284 Printer port", DEFAULT_RCLK, PUC_PORT_2S1P, 0x10, 4, 0, }, { 0x9710, 0x9865, 0xa000, 0x3020, "NetMos NM9865 Dual 1284 Printer port", DEFAULT_RCLK, PUC_PORT_2P, 0x10, 4, 0, }, { 0xb00c, 0x021c, 0xffff, 0, "IC Book Labs Gunboat x4 Lite", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 0, 8, .config_function = puc_config_icbook }, { 0xb00c, 0x031c, 0xffff, 0, "IC Book Labs Gunboat x4 Pro", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 0, 8, .config_function = puc_config_icbook }, { 0xb00c, 0x041c, 0xffff, 0, "IC Book Labs Ironclad x8 Lite", DEFAULT_RCLK, PUC_PORT_8S, 0x10, 0, 8, .config_function = puc_config_icbook }, { 0xb00c, 0x051c, 0xffff, 0, "IC Book Labs Ironclad x8 Pro", DEFAULT_RCLK, PUC_PORT_8S, 0x10, 0, 8, .config_function = puc_config_icbook }, { 0xb00c, 0x081c, 0xffff, 0, "IC Book Labs Dreadnought x16 Pro", DEFAULT_RCLK * 8, PUC_PORT_16S, 0x10, 0, 8, .config_function = puc_config_icbook }, { 0xb00c, 0x091c, 0xffff, 0, "IC Book Labs Dreadnought x16 Lite", DEFAULT_RCLK, PUC_PORT_16S, 0x10, 0, 8, .config_function = puc_config_icbook }, { 0xb00c, 0x0a1c, 0xffff, 0, "IC Book Labs Gunboat x2 Low Profile", DEFAULT_RCLK, PUC_PORT_2S, 0x10, 0, 8, }, { 0xb00c, 0x0b1c, 0xffff, 0, "IC Book Labs Gunboat x4 Low Profile", DEFAULT_RCLK, PUC_PORT_4S, 0x10, 0, 8, .config_function = puc_config_icbook }, { 0xffff, 0, 0xffff, 0, NULL, 0 } }; static int puc_config_amc(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { switch (cmd) { case PUC_CFG_GET_OFS: *res = 8 * (port & 1); return (0); case PUC_CFG_GET_RID: *res = 0x14 + (port >> 1) * 4; return (0); default: break; } return (ENXIO); } static int puc_config_cronyx(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { if (cmd == PUC_CFG_GET_OFS) { *res = port * 0x200; return (0); } return (ENXIO); } static int puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { const struct puc_cfg *cfg = sc->sc_cfg; if (cmd == PUC_CFG_GET_OFS) { if (cfg->subdevice == 0x1282) /* Everest SP */ port <<= 1; else if (cfg->subdevice == 0x104b) /* Maestro SP2 */ port = (port == 3) ? 4 : port; *res = port * 8 + ((port > 2) ? 0x18 : 0); return (0); } return (ENXIO); } static int puc_config_icbook(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { if (cmd == PUC_CFG_GET_ILR) { *res = PUC_ILR_DIGI; return (0); } return (ENXIO); } static int puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { const struct puc_cfg *cfg = sc->sc_cfg; struct puc_bar *bar; uint8_t v0, v1; switch (cmd) { case PUC_CFG_SETUP: /* * Check if the scratchpad register is enabled or if the * interrupt status and options registers are active. */ bar = puc_get_bar(sc, cfg->rid); if (bar == NULL) return (ENXIO); /* Set DLAB in the LCR register of UART 0. */ bus_write_1(bar->b_res, 3, 0x80); /* Write 0 to the SPR register of UART 0. */ bus_write_1(bar->b_res, 7, 0); /* Read back the contents of the SPR register of UART 0. */ v0 = bus_read_1(bar->b_res, 7); /* Write a specific value to the SPR register of UART 0. */ bus_write_1(bar->b_res, 7, 0x80 + -cfg->clock); /* Read back the contents of the SPR register of UART 0. */ v1 = bus_read_1(bar->b_res, 7); /* Clear DLAB in the LCR register of UART 0. */ bus_write_1(bar->b_res, 3, 0); /* Save the two values read-back from the SPR register. */ sc->sc_cfg_data = (v0 << 8) | v1; if (v0 == 0 && v1 == 0x80 + -cfg->clock) { /* * The SPR register echoed the two values written * by us. This means that the SPAD jumper is set. */ device_printf(sc->sc_dev, "warning: extra features " "not usable -- SPAD compatibility enabled\n"); return (0); } if (v0 != 0) { /* * The first value doesn't match. This can only mean * that the SPAD jumper is not set and that a non- * standard fixed clock multiplier jumper is set. */ if (bootverbose) device_printf(sc->sc_dev, "fixed clock rate " "multiplier of %d\n", 1 << v0); if (v0 < -cfg->clock) device_printf(sc->sc_dev, "warning: " "suboptimal fixed clock rate multiplier " "setting\n"); return (0); } /* * The first value matched, but the second didn't. We know * that the SPAD jumper is not set. We also know that the * clock rate multiplier is software controlled *and* that * we just programmed it to the maximum allowed. */ if (bootverbose) device_printf(sc->sc_dev, "clock rate multiplier of " "%d selected\n", 1 << -cfg->clock); return (0); case PUC_CFG_GET_CLOCK: v0 = (sc->sc_cfg_data >> 8) & 0xff; v1 = sc->sc_cfg_data & 0xff; if (v0 == 0 && v1 == 0x80 + -cfg->clock) { /* * XXX With the SPAD jumper applied, there's no * easy way of knowing if there's also a clock * rate multiplier jumper installed. Let's hope * not... */ *res = DEFAULT_RCLK; } else if (v0 == 0) { /* * No clock rate multiplier jumper installed, * so we programmed the board with the maximum * multiplier allowed as given to us in the * clock field of the config record (negated). */ *res = DEFAULT_RCLK << -cfg->clock; } else *res = DEFAULT_RCLK << v0; return (0); case PUC_CFG_GET_ILR: v0 = (sc->sc_cfg_data >> 8) & 0xff; v1 = sc->sc_cfg_data & 0xff; *res = (v0 == 0 && v1 == 0x80 + -cfg->clock) ? PUC_ILR_NONE : PUC_ILR_QUATECH; return (0); default: break; } return (ENXIO); } static int puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { static int base[] = { 0x251, 0x3f0, 0 }; const struct puc_cfg *cfg = sc->sc_cfg; struct puc_bar *bar; int efir, idx, ofs; uint8_t v; switch (cmd) { case PUC_CFG_SETUP: bar = puc_get_bar(sc, cfg->rid); if (bar == NULL) return (ENXIO); /* configure both W83877TFs */ bus_write_1(bar->b_res, 0x250, 0x89); bus_write_1(bar->b_res, 0x3f0, 0x87); bus_write_1(bar->b_res, 0x3f0, 0x87); idx = 0; while (base[idx] != 0) { efir = base[idx]; bus_write_1(bar->b_res, efir, 0x09); v = bus_read_1(bar->b_res, efir + 1); if ((v & 0x0f) != 0x0c) return (ENXIO); bus_write_1(bar->b_res, efir, 0x16); v = bus_read_1(bar->b_res, efir + 1); bus_write_1(bar->b_res, efir, 0x16); bus_write_1(bar->b_res, efir + 1, v | 0x04); bus_write_1(bar->b_res, efir, 0x16); bus_write_1(bar->b_res, efir + 1, v & ~0x04); ofs = base[idx] & 0x300; bus_write_1(bar->b_res, efir, 0x23); bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2); bus_write_1(bar->b_res, efir, 0x24); bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2); bus_write_1(bar->b_res, efir, 0x25); bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2); bus_write_1(bar->b_res, efir, 0x17); bus_write_1(bar->b_res, efir + 1, 0x03); bus_write_1(bar->b_res, efir, 0x28); bus_write_1(bar->b_res, efir + 1, 0x43); idx++; } bus_write_1(bar->b_res, 0x250, 0xaa); bus_write_1(bar->b_res, 0x3f0, 0xaa); return (0); case PUC_CFG_GET_OFS: switch (port) { case 0: *res = 0x2f8; return (0); case 1: *res = 0x2e8; return (0); case 2: *res = 0x3f8; return (0); case 3: *res = 0x3e8; return (0); case 4: *res = 0x278; return (0); } break; default: break; } return (ENXIO); } static int puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { const struct puc_cfg *cfg = sc->sc_cfg; switch (cmd) { case PUC_CFG_GET_OFS: if (cfg->ports == PUC_PORT_8S) { *res = (port > 4) ? 8 * (port - 4) : 0; return (0); } break; case PUC_CFG_GET_RID: if (cfg->ports == PUC_PORT_8S) { *res = 0x10 + ((port > 4) ? 0x10 : 4 * port); return (0); } if (cfg->ports == PUC_PORT_2S1P) { switch (port) { case 0: *res = 0x10; return (0); case 1: *res = 0x14; return (0); case 2: *res = 0x1c; return (0); } } break; default: break; } return (ENXIO); } static int puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { static uint16_t dual[] = { 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 0xD079, 0 }; static uint16_t quad[] = { 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 0xB157, 0 }; static uint16_t octa[] = { 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 }; static struct { int ports; uint16_t *ids; } subdevs[] = { { 2, dual }, { 4, quad }, { 8, octa }, { 0, NULL } }; static char desc[64]; int dev, id; uint16_t subdev; switch (cmd) { case PUC_CFG_GET_DESC: snprintf(desc, sizeof(desc), "Timedia technology %d Port Serial", (int)sc->sc_cfg_data); *res = (intptr_t)desc; return (0); case PUC_CFG_GET_NPORTS: subdev = pci_get_subdevice(sc->sc_dev); dev = 0; while (subdevs[dev].ports != 0) { id = 0; while (subdevs[dev].ids[id] != 0) { if (subdev == subdevs[dev].ids[id]) { sc->sc_cfg_data = subdevs[dev].ports; *res = sc->sc_cfg_data; return (0); } id++; } dev++; } return (ENXIO); case PUC_CFG_GET_OFS: *res = (port == 1 || port == 3) ? 8 : 0; return (0); case PUC_CFG_GET_RID: *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4; return (0); case PUC_CFG_GET_TYPE: *res = PUC_TYPE_SERIAL; return (0); default: break; } return (ENXIO); } static int puc_config_titan(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, intptr_t *res) { switch (cmd) { case PUC_CFG_GET_OFS: *res = (port < 3) ? 0 : (port - 2) << 3; return (0); case PUC_CFG_GET_RID: *res = 0x14 + ((port >= 2) ? 0x0c : port << 2); return (0); default: break; } return (ENXIO); }