/*- * Copyright (c) 1998 - 2008 Søren Schmidt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_ata.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* local prototypes */ static int ata_ahci_ctlr_reset(device_t dev); static int ata_ahci_suspend(device_t dev); static int ata_ahci_status(device_t dev); static int ata_ahci_begin_transaction(struct ata_request *request); static int ata_ahci_end_transaction(struct ata_request *request); static int ata_ahci_pm_read(device_t dev, int port, int reg, u_int32_t *result); static int ata_ahci_pm_write(device_t dev, int port, int reg, u_int32_t result); static u_int32_t ata_ahci_softreset(device_t dev, int port); static void ata_ahci_dmasetprd(void *xsc, bus_dma_segment_t *segs, int nsegs, int error); static int ata_ahci_setup_fis(struct ata_ahci_cmd_tab *ctp, struct ata_request *equest); /* * AHCI v1.x compliant SATA chipset support functions */ static int ata_ahci_probe(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(dev); char buffer[64]; /* is this a possible AHCI candidate ? */ if (pci_get_subclass(dev) != PCIS_STORAGE_SATA) return ENXIO; /* is this PCI device flagged as an AHCI compliant chip ? */ if (pci_read_config(dev, PCIR_PROGIF, 1) != PCIP_STORAGE_SATA_AHCI_1_0) return ENXIO; if (bootverbose) sprintf(buffer, "%s (ID=%08x) AHCI controller", ata_pcivendor2str(dev), pci_get_devid(dev)); else sprintf(buffer, "%s AHCI controller", ata_pcivendor2str(dev)); device_set_desc_copy(dev, buffer); ctlr->chipinit = ata_ahci_chipinit; return 0; } int ata_ahci_chipinit(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(dev); u_int32_t version; /* if we have a memory BAR(5) we are likely on an AHCI part */ ctlr->r_type2 = SYS_RES_MEMORY; ctlr->r_rid2 = PCIR_BAR(5); if (!(ctlr->r_res2 = bus_alloc_resource_any(dev, ctlr->r_type2, &ctlr->r_rid2, RF_ACTIVE))) return ENXIO; /* setup interrupt delivery if not done allready by a vendor driver */ if (!ctlr->r_irq) { if (ata_setup_interrupt(dev, ata_generic_intr)) return ENXIO; } else device_printf(dev, "AHCI called from vendor specific driver\n"); /* reset controller */ ata_ahci_ctlr_reset(dev); /* get the number of HW channels */ ctlr->channels = MAX(flsl(ATA_INL(ctlr->r_res2, ATA_AHCI_PI)), (ATA_INL(ctlr->r_res2, ATA_AHCI_CAP) & ATA_AHCI_NPMASK) + 1); ctlr->reset = ata_ahci_reset; ctlr->dmainit = ata_ahci_dmainit; ctlr->allocate = ata_ahci_allocate; ctlr->setmode = ata_sata_setmode; ctlr->suspend = ata_ahci_suspend; ctlr->resume = ata_ahci_ctlr_reset; /* enable PCI interrupt */ pci_write_config(dev, PCIR_COMMAND, pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400, 2); /* announce we support the HW */ version = ATA_INL(ctlr->r_res2, ATA_AHCI_VS); device_printf(dev, "AHCI Version %x%x.%x%x controller with %d ports PM %s\n", (version >> 24) & 0xff, (version >> 16) & 0xff, (version >> 8) & 0xff, version & 0xff, (ATA_INL(ctlr->r_res2, ATA_AHCI_CAP) & ATA_AHCI_NPMASK) + 1, (ATA_INL(ctlr->r_res2, ATA_AHCI_CAP) & ATA_AHCI_CAP_SPM) ? "supported" : "not supported"); return 0; } static int ata_ahci_ctlr_reset(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(dev); /* enable AHCI mode */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_GHC, ATA_AHCI_GHC_AE); /* reset AHCI controller */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_GHC, ATA_AHCI_GHC_HR); DELAY(1000000); if (ATA_INL(ctlr->r_res2, ATA_AHCI_GHC) & ATA_AHCI_GHC_HR) { bus_release_resource(dev, ctlr->r_type2, ctlr->r_rid2, ctlr->r_res2); device_printf(dev, "AHCI controller reset failure\n"); return ENXIO; } /* reenable AHCI mode */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_GHC, ATA_AHCI_GHC_AE); /* clear interrupts */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_IS, ATA_INL(ctlr->r_res2, ATA_AHCI_IS)); /* enable AHCI interrupts */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_GHC, ATA_INL(ctlr->r_res2, ATA_AHCI_GHC) | ATA_AHCI_GHC_IE); return 0; } static int ata_ahci_suspend(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(dev); /* disable interupts so the state change(s) doesn't trigger */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_GHC, ATA_INL(ctlr->r_res2, ATA_AHCI_GHC) & (~ATA_AHCI_GHC_IE)); return 0; } int ata_ahci_allocate(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); int offset = ch->unit << 7; /* set the SATA resources */ ch->r_io[ATA_SSTATUS].res = ctlr->r_res2; ch->r_io[ATA_SSTATUS].offset = ATA_AHCI_P_SSTS + offset; ch->r_io[ATA_SERROR].res = ctlr->r_res2; ch->r_io[ATA_SERROR].offset = ATA_AHCI_P_SERR + offset; ch->r_io[ATA_SCONTROL].res = ctlr->r_res2; ch->r_io[ATA_SCONTROL].offset = ATA_AHCI_P_SCTL + offset; ch->r_io[ATA_SACTIVE].res = ctlr->r_res2; ch->r_io[ATA_SACTIVE].offset = ATA_AHCI_P_SACT + offset; ch->hw.status = ata_ahci_status; ch->hw.begin_transaction = ata_ahci_begin_transaction; ch->hw.end_transaction = ata_ahci_end_transaction; ch->hw.command = NULL; /* not used here */ ch->hw.softreset = ata_ahci_softreset; ch->hw.pm_read = ata_ahci_pm_read; ch->hw.pm_write = ata_ahci_pm_write; return 0; } static int ata_ahci_status(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); u_int32_t action = ATA_INL(ctlr->r_res2, ATA_AHCI_IS); int offset = ch->unit << 7; #define ATA_AHCI_STATBITS \ (ATA_AHCI_P_IX_IF|ATA_AHCI_P_IX_HBD|ATA_AHCI_P_IX_HBF|ATA_AHCI_P_IX_TFE) if (action & (1 << ch->unit)) { u_int32_t istatus = ATA_INL(ctlr->r_res2, ATA_AHCI_P_IS + offset); u_int32_t cstatus = ATA_INL(ctlr->r_res2, ATA_AHCI_P_CI + offset); /* clear interrupt(s) */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_IS + offset, istatus); ATA_OUTL(ctlr->r_res2, ATA_AHCI_IS, action & (1 << ch->unit)); /* do we have any PHY events ? */ if (istatus & (ATA_AHCI_P_IX_PRC | ATA_AHCI_P_IX_PC)) ata_sata_phy_check_events(dev); /* do we have a potentially hanging engine to take care of? */ /* XXX SOS what todo on NCQ */ if ((istatus & ATA_AHCI_STATBITS) && (cstatus & 1)) { u_int32_t cmd = ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset); int timeout = 0; /* kill off all activity on this channel */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, cmd & ~(ATA_AHCI_P_CMD_FRE | ATA_AHCI_P_CMD_ST)); /* XXX SOS this is not entirely wrong */ do { DELAY(1000); if (timeout++ > 1000) { device_printf(dev, "stopping AHCI engine failed\n"); break; } } while (ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset) & ATA_AHCI_P_CMD_CR); /* start operations on this channel */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, cmd | (ATA_AHCI_P_CMD_FRE | ATA_AHCI_P_CMD_ST)); return 1; } else /* XXX SOS what todo on NCQ */ return (!(cstatus & 1)); } return 0; } /* must be called with ATA channel locked and state_mtx held */ static int ata_ahci_begin_transaction(struct ata_request *request) { struct ata_pci_controller *ctlr=device_get_softc(GRANDPARENT(request->dev)); struct ata_channel *ch = device_get_softc(request->parent); struct ata_device *atadev = device_get_softc(request->dev); struct ata_ahci_cmd_tab *ctp; struct ata_ahci_cmd_list *clp; int offset = ch->unit << 7; int port = atadev->unit & 0x0f; int entries = 0; int fis_size; /* get a piece of the workspace for this request */ ctp = (struct ata_ahci_cmd_tab *) (ch->dma.work + ATA_AHCI_CT_OFFSET + (ATA_AHCI_CT_SIZE*request->tag)); /* setup the FIS for this request */ if (!(fis_size = ata_ahci_setup_fis(ctp, request))) { device_printf(request->dev, "setting up SATA FIS failed\n"); request->result = EIO; return ATA_OP_FINISHED; } /* if request moves data setup and load SG list */ if (request->flags & (ATA_R_READ | ATA_R_WRITE)) { if (ch->dma.load(request, ctp->prd_tab, &entries)) { device_printf(request->dev, "setting up DMA failed\n"); request->result = EIO; return ATA_OP_FINISHED; } } /* setup the command list entry */ clp = (struct ata_ahci_cmd_list *) (ch->dma.work + ATA_AHCI_CL_OFFSET + (ATA_AHCI_CL_SIZE*request->tag)); clp->prd_length = entries; clp->cmd_flags = (request->flags & ATA_R_WRITE ? ATA_AHCI_CMD_WRITE : 0) | (request->flags & ATA_R_ATAPI ? (ATA_AHCI_CMD_ATAPI | ATA_AHCI_CMD_PREFETCH) : 0) | (fis_size / sizeof(u_int32_t)) | (port << 12); clp->bytecount = 0; clp->cmd_table_phys = htole64(ch->dma.work_bus + ATA_AHCI_CT_OFFSET + (ATA_AHCI_CT_SIZE * request->tag)); /* clear eventual ACTIVE bit */ ATA_IDX_OUTL(ch, ATA_SACTIVE, ATA_IDX_INL(ch, ATA_SACTIVE) & (1 << request->tag)); /* set command type bit */ if (request->flags & ATA_R_ATAPI) ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset) | ATA_AHCI_P_CMD_ATAPI); else ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset) & ~ATA_AHCI_P_CMD_ATAPI); /* set PM port to address */ //ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_FBS + offset, (port << 8) | 0x00000001); /* issue command to controller */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CI + offset, (1 << request->tag)); if (!(request->flags & ATA_R_ATAPI)) { /* device reset doesn't interrupt */ if (request->u.ata.command == ATA_DEVICE_RESET) { u_int32_t tf_data; int timeout = 1000000; do { DELAY(10); tf_data = ATA_INL(ctlr->r_res2, ATA_AHCI_P_TFD + (ch->unit<<7)); } while ((tf_data & ATA_S_BUSY) && timeout--); if (bootverbose) device_printf(ch->dev, "device_reset timeout=%dus\n", (1000000-timeout)*10); request->status = tf_data; if (request->status & ATA_S_ERROR) request->error = tf_data >> 8; return ATA_OP_FINISHED; } } /* start the timeout */ callout_reset(&request->callout, request->timeout * hz, (timeout_t*)ata_timeout, request); return ATA_OP_CONTINUES; } /* must be called with ATA channel locked and state_mtx held */ static int ata_ahci_end_transaction(struct ata_request *request) { struct ata_pci_controller *ctlr=device_get_softc(GRANDPARENT(request->dev)); struct ata_channel *ch = device_get_softc(request->parent); struct ata_ahci_cmd_list *clp; u_int32_t tf_data; int offset = ch->unit << 7; /* kill the timeout */ callout_stop(&request->callout); /* get status */ tf_data = ATA_INL(ctlr->r_res2, ATA_AHCI_P_TFD + offset); request->status = tf_data; /* if error status get details */ if (request->status & ATA_S_ERROR) request->error = tf_data >> 8; /* on control commands read back registers to the request struct */ if (request->flags & ATA_R_CONTROL) { struct ata_device *atadev = device_get_softc(request->dev); u_int8_t *fis = ch->dma.work + ATA_AHCI_FB_OFFSET + 0x40; request->u.ata.count = fis[12] | ((u_int16_t)fis[13] << 8); request->u.ata.lba = fis[4] | ((u_int64_t)fis[5] << 8) | ((u_int64_t)fis[6] << 16); if (atadev->flags & ATA_D_48BIT_ACTIVE) request->u.ata.lba |= ((u_int64_t)fis[8] << 24) | ((u_int64_t)fis[9] << 32) | ((u_int64_t)fis[10] << 40); else request->u.ata.lba |= ((u_int64_t)(fis[7] & 0x0f) << 24); } /* record how much data we actually moved */ clp = (struct ata_ahci_cmd_list *) (ch->dma.work + ATA_AHCI_CL_OFFSET + (ATA_AHCI_CL_SIZE*request->tag)); request->donecount = clp->bytecount; /* release SG list etc */ ch->dma.unload(request); return ATA_OP_FINISHED; } static int ata_ahci_issue_cmd(device_t dev, u_int16_t flags, int timeout) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); struct ata_ahci_cmd_list *clp = (struct ata_ahci_cmd_list *)(ch->dma.work + ATA_AHCI_CL_OFFSET); struct ata_ahci_cmd_tab *ctp = (struct ata_ahci_cmd_tab *)(ch->dma.work + ATA_AHCI_CT_OFFSET); u_int32_t status = 0; int offset = ch->unit << 7; int port = (ctp->cfis[1] & 0x0f); int count; clp->prd_length = 0; clp->cmd_flags = (20 / sizeof(u_int32_t)) | flags | (port << 12); clp->bytecount = 0; clp->cmd_table_phys = htole64(ch->dma.work_bus + ATA_AHCI_CT_OFFSET); /* set PM port */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_FBS + offset, (port << 8) | 0x00000001); /* issue command to controller */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CI + offset, 1); /* poll for command finished */ for (count = 0; count < timeout; count++) { DELAY(1000); if (!((status = ATA_INL(ctlr->r_res2, ATA_AHCI_P_CI + offset)) & 1)) break; } /* clear interrupts */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_IS + offset, ATA_INL(ctlr->r_res2, ATA_AHCI_P_IS + offset)); if (bootverbose) device_printf(dev, "ahci_issue_cmd time=%dms cnt=%dms status=%08x\n", timeout, count, status); if (timeout && (count >= timeout)) return EIO; return 0; } static int ata_ahci_pm_read(device_t dev, int port, int reg, u_int32_t *result) { struct ata_channel *ch = device_get_softc(dev); struct ata_ahci_cmd_tab *ctp = (struct ata_ahci_cmd_tab *)(ch->dma.work + ATA_AHCI_CT_OFFSET); u_int8_t *fis = ch->dma.work + ATA_AHCI_FB_OFFSET + 0x40; bzero(ctp->cfis, 64); ctp->cfis[0] = 0x27; /* host to device */ ctp->cfis[1] = 0x8f; /* command FIS to PM port */ ctp->cfis[2] = ATA_READ_PM; ctp->cfis[3] = reg; ctp->cfis[7] = port | ATA_D_LBA; ctp->cfis[15] = ATA_A_4BIT; if (ata_ahci_issue_cmd(dev, 0, 10)) { device_printf(dev, "error reading PM port\n"); return EIO; } *result = fis[12] | (fis[4] << 8) | (fis[5] << 16) | (fis[6] << 24); return 0; } static int ata_ahci_pm_write(device_t dev, int port, int reg, u_int32_t value) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); struct ata_ahci_cmd_tab *ctp = (struct ata_ahci_cmd_tab *)(ch->dma.work + ATA_AHCI_CT_OFFSET); int offset = ch->unit << 7; bzero(ctp->cfis, 64); ctp->cfis[0] = 0x27; /* host to device */ ctp->cfis[1] = 0x8f; /* command FIS to PM port */ ctp->cfis[2] = ATA_WRITE_PM; ctp->cfis[3] = reg; ctp->cfis[7] = port | ATA_D_LBA; ctp->cfis[12] = value & 0xff; ctp->cfis[4] = (value >> 8) & 0xff;; ctp->cfis[5] = (value >> 16) & 0xff;; ctp->cfis[6] = (value >> 24) & 0xff;; ctp->cfis[15] = ATA_A_4BIT; if (ata_ahci_issue_cmd(dev, 0, 100)) { device_printf(dev, "error writing PM port\n"); return ATA_E_ABORT; } return (ATA_INL(ctlr->r_res2, ATA_AHCI_P_TFD + offset) >> 8) & 0xff; } static void ata_ahci_restart(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); u_int32_t cmd; int offset = ch->unit << 7; int timeout; /* kill off all activity on this channel */ cmd = ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset); ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, cmd & ~(ATA_AHCI_P_CMD_FRE | ATA_AHCI_P_CMD_ST)); /* XXX SOS this is not entirely wrong */ timeout = 0; do { DELAY(1000); if (timeout++ > 1000) { device_printf(dev, "stopping AHCI engine failed\n"); break; } } while (ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset) & ATA_AHCI_P_CMD_CR); /* issue Command List Override if supported */ if (ATA_INL(ctlr->r_res2, ATA_AHCI_CAP) & ATA_AHCI_CAP_CLO) { cmd = ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset); cmd |= ATA_AHCI_P_CMD_CLO; ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, cmd); timeout = 0; do { DELAY(1000); if (timeout++ > 1000) { device_printf(dev, "executing CLO failed\n"); break; } } while (ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD+offset)&ATA_AHCI_P_CMD_CLO); } /* clear SATA error register */ ATA_IDX_OUTL(ch, ATA_SERROR, ATA_IDX_INL(ch, ATA_SERROR)); /* clear any interrupts pending on this channel */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_IS + offset, ATA_INL(ctlr->r_res2, ATA_AHCI_P_IS + offset)); /* start operations on this channel */ cmd = ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset); ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, cmd | (ATA_AHCI_P_CMD_FRE | ATA_AHCI_P_CMD_ST) | (ch->devices & ATA_PORTMULTIPLIER ? ATA_AHCI_P_CMD_PMA : 0)); } static u_int32_t ata_ahci_softreset(device_t dev, int port) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); int offset = ch->unit << 7; int timeout = 0; #ifdef AHCI_PM struct ata_ahci_cmd_tab *ctp = (struct ata_ahci_cmd_tab *)(ch->dma.work + ATA_AHCI_CT_OFFSET); /* kick controller into sane state if needed */ ata_ahci_restart(dev); /* pull reset active */ bzero(ctp->cfis, 64); ctp->cfis[0] = 0x27; ctp->cfis[1] = port & 0x0f; //ctp->cfis[7] = ATA_D_LBA | ATA_D_IBM; ctp->cfis[15] = (ATA_A_4BIT | ATA_A_RESET); if (ata_ahci_issue_cmd(dev, ATA_AHCI_CMD_RESET | ATA_AHCI_CMD_CLR_BUSY,100)) device_printf(dev, "setting SRST failed ??\n"); //return -1; ata_udelay(5000); /* pull reset inactive -> device softreset */ bzero(ctp->cfis, 64); ctp->cfis[0] = 0x27; ctp->cfis[1] = port & 0x0f; //ctp->cfis[7] = ATA_D_LBA | ATA_D_IBM; ctp->cfis[15] = ATA_A_4BIT; if (ata_ahci_issue_cmd(dev, 0, 0)) return -1; ata_udelay(150000); #endif do { DELAY(1000); if (timeout++ > 1000) { device_printf(dev, "still BUSY after softreset\n"); break; } } while (ATA_INL(ctlr->r_res2, ATA_AHCI_P_TFD + offset) & ATA_S_BUSY); if (bootverbose) device_printf(dev, "BUSY wait time=%dms\n", timeout); return ATA_INL(ctlr->r_res2, ATA_AHCI_P_SIG + offset); } void ata_ahci_reset(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); u_int64_t work; u_int32_t cmd, signature; int offset = ch->unit << 7; if (!(ATA_INL(ctlr->r_res2, ATA_AHCI_PI) & (1 << ch->unit))) { device_printf(dev, "port not implemented\n"); return; } /* setup work areas */ work = ch->dma.work_bus + ATA_AHCI_CL_OFFSET; ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CLB + offset, work & 0xffffffff); ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CLBU + offset, work >> 32); work = ch->dma.work_bus + ATA_AHCI_FB_OFFSET; ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_FB + offset, work & 0xffffffff); ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_FBU + offset, work >> 32); /* enable wanted port interrupts */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_IE + offset, (ATA_AHCI_P_IX_CPD | ATA_AHCI_P_IX_TFE | ATA_AHCI_P_IX_HBF | ATA_AHCI_P_IX_HBD | ATA_AHCI_P_IX_IF | ATA_AHCI_P_IX_OF | ATA_AHCI_P_IX_PRC | ATA_AHCI_P_IX_PC | ATA_AHCI_P_IX_DP | ATA_AHCI_P_IX_UF | ATA_AHCI_P_IX_SDB | ATA_AHCI_P_IX_DS | ATA_AHCI_P_IX_PS | ATA_AHCI_P_IX_DHR)); /* activate the channel and power/spin up device */ ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, (ATA_AHCI_P_CMD_ACTIVE | ATA_AHCI_P_CMD_POD | ATA_AHCI_P_CMD_SUD)); ata_ahci_restart(dev); /* enable FIS based switching */ //ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_FBS + offset, 0x00000003); if (!ata_sata_phy_reset(dev)) { if (bootverbose) device_printf(dev, "phy reset found no device\n"); ch->devices = 0; /* kill off all activity on this channel */ cmd = ATA_INL(ctlr->r_res2, ATA_AHCI_P_CMD + offset); ATA_OUTL(ctlr->r_res2, ATA_AHCI_P_CMD + offset, cmd & ~(ATA_AHCI_P_CMD_FRE | ATA_AHCI_P_CMD_ST)); return; } /* only probe for PortMultiplier if HW has support */ if (ATA_INL(ctlr->r_res2, ATA_AHCI_CAP) & ATA_AHCI_CAP_SPM) signature = ata_ahci_softreset(dev, ATA_PM); else { signature = ata_ahci_softreset(dev, 0); } if (bootverbose) device_printf(dev, "SIGNATURE: %08x\n", signature); switch (signature) { case 0x00000101: ch->devices = ATA_ATA_MASTER; break; case 0x96690101: ch->devices = ATA_PORTMULTIPLIER; ata_pm_identify(dev); break; case 0xeb140101: ch->devices = ATA_ATAPI_MASTER; break; default: /* SOS XXX */ if (bootverbose) device_printf(dev, "No signature, asuming disk device\n"); ch->devices = ATA_ATA_MASTER; } if (bootverbose) device_printf(dev, "ahci_reset devices=%08x\n", ch->devices); } static void ata_ahci_dmasetprd(void *xsc, bus_dma_segment_t *segs, int nsegs, int error) { struct ata_dmasetprd_args *args = xsc; struct ata_ahci_dma_prd *prd = args->dmatab; int i; if (!(args->error = error)) { for (i = 0; i < nsegs; i++) { prd[i].dba = htole64(segs[i].ds_addr); prd[i].dbc = htole32((segs[i].ds_len - 1) & ATA_AHCI_PRD_MASK); } } KASSERT(nsegs <= ATA_AHCI_DMA_ENTRIES, ("too many DMA segment entries\n")); args->nsegs = nsegs; } void ata_ahci_dmainit(device_t dev) { struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); struct ata_channel *ch = device_get_softc(dev); ata_dmainit(dev); /* note start and stop are not used here */ ch->dma.setprd = ata_ahci_dmasetprd; ch->dma.max_iosize = 8192 * DEV_BSIZE; if (ATA_INL(ctlr->r_res2, ATA_AHCI_CAP) & ATA_AHCI_CAP_64BIT) ch->dma.max_address = BUS_SPACE_MAXADDR; } static int ata_ahci_setup_fis(struct ata_ahci_cmd_tab *ctp, struct ata_request *request) { bzero(ctp->cfis, 64); if (request->flags & ATA_R_ATAPI) { bzero(ctp->acmd, 32); bcopy(request->u.atapi.ccb, ctp->acmd, 16); } return ata_request2fis_h2d(request, &ctp->cfis[0]); } ATA_DECLARE_DRIVER(ata_ahci);