/*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211__IEEE80211_H_ #define _NET80211__IEEE80211_H_ /* * 802.11 implementation definitions. * * NB: this file is used by applications. */ /* * PHY type; mostly used to identify FH phys. */ enum ieee80211_phytype { IEEE80211_T_DS, /* direct sequence spread spectrum */ IEEE80211_T_FH, /* frequency hopping */ IEEE80211_T_OFDM, /* frequency division multiplexing */ IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */ IEEE80211_T_HT, /* high throughput */ IEEE80211_T_OFDM_HALF, /* 1/2 rate OFDM */ IEEE80211_T_OFDM_QUARTER, /* 1/4 rate OFDM */ }; #define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */ /* * PHY mode; this is not really a mode as multi-mode devices * have multiple PHY's. Mode is mostly used as a shorthand * for constraining which channels to consider in setting up * operation. Modes used to be used more extensively when * channels were identified as IEEE channel numbers. */ enum ieee80211_phymode { IEEE80211_MODE_AUTO = 0, /* autoselect */ IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */ IEEE80211_MODE_11B = 2, /* 2GHz, CCK */ IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */ IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */ IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */ IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */ IEEE80211_MODE_STURBO_A = 7, /* 5GHz, OFDM, 2x clock, static */ IEEE80211_MODE_11NA = 8, /* 5GHz, w/ HT */ IEEE80211_MODE_11NG = 9, /* 2GHz, w/ HT */ }; #define IEEE80211_MODE_MAX (IEEE80211_MODE_11NG+1) /* * Operating mode. Devices do not necessarily support * all modes; they indicate which are supported in their * capabilities. */ enum ieee80211_opmode { IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ IEEE80211_M_STA = 1, /* infrastructure station */ IEEE80211_M_WDS = 2, /* WDS link */ IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ IEEE80211_M_HOSTAP = 4, /* Software Access Point */ IEEE80211_M_MONITOR = 5, /* Monitor mode */ }; #define IEEE80211_OPMODE_MAX (IEEE80211_M_MONITOR+1) /* * 802.11g/802.11n protection mode. */ enum ieee80211_protmode { IEEE80211_PROT_NONE = 0, /* no protection */ IEEE80211_PROT_CTSONLY = 1, /* CTS to self */ IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */ }; /* * Authentication mode. The open and shared key authentication * modes are implemented within the 802.11 layer. 802.1x and * WPA/802.11i are implemented in user mode by setting the * 802.11 layer into IEEE80211_AUTH_8021X and deferring * authentication to user space programs. */ enum ieee80211_authmode { IEEE80211_AUTH_NONE = 0, IEEE80211_AUTH_OPEN = 1, /* open */ IEEE80211_AUTH_SHARED = 2, /* shared-key */ IEEE80211_AUTH_8021X = 3, /* 802.1x */ IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ /* NB: these are used only for ioctls */ IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ }; /* * Roaming mode is effectively who controls the operation * of the 802.11 state machine when operating as a station. * State transitions are controlled either by the driver * (typically when management frames are processed by the * hardware/firmware), the host (auto/normal operation of * the 802.11 layer), or explicitly through ioctl requests * when applications like wpa_supplicant want control. */ enum ieee80211_roamingmode { IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */ IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */ IEEE80211_ROAMING_MANUAL= 2, /* application control */ }; /* * Channels are specified by frequency and attributes. */ struct ieee80211_channel { uint32_t ic_flags; /* see below */ uint16_t ic_freq; /* setting in Mhz */ uint8_t ic_ieee; /* IEEE channel number */ int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ int8_t ic_maxpower; /* maximum tx power in .5 dBm */ int8_t ic_minpower; /* minimum tx power in .5 dBm */ uint8_t ic_state; /* dynamic state */ uint8_t ic_extieee; /* HT40 extension channel number */ int8_t ic_maxantgain; /* maximum antenna gain in .5 dBm */ uint8_t ic_pad; uint16_t ic_devdata; /* opaque device/driver data */ }; #define IEEE80211_CHAN_MAX 256 #define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */ #define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */ #define IEEE80211_CHAN_ANYC \ ((struct ieee80211_channel *) IEEE80211_CHAN_ANY) /* channel attributes */ #define IEEE80211_CHAN_PRIV0 0x00000001 /* driver private bit 0 */ #define IEEE80211_CHAN_PRIV1 0x00000002 /* driver private bit 1 */ #define IEEE80211_CHAN_PRIV2 0x00000004 /* driver private bit 2 */ #define IEEE80211_CHAN_PRIV3 0x00000008 /* driver private bit 3 */ #define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */ #define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */ #define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */ #define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */ #define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */ #define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */ #define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */ #define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */ #define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */ #define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */ #define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */ #define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */ #define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */ #define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */ #define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */ #define IEEE80211_CHAN_DFS 0x00080000 /* DFS required */ #define IEEE80211_CHAN_4MSXMIT 0x00100000 /* 4ms limit on frame length */ #define IEEE80211_CHAN_NOADHOC 0x00200000 /* adhoc mode not allowed */ #define IEEE80211_CHAN_NOHOSTAP 0x00400000 /* hostap mode not allowed */ #define IEEE80211_CHAN_11D 0x00800000 /* 802.11d required */ #define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D) #define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40) #define IEEE80211_CHAN_BITS \ "\20\1PRIV0\2PRIV2\3PRIV3\4PRIV4\5TURBO\6CCK\7OFDM\0102GHZ\0115GHZ" \ "\12PASSIVE\13DYN\14GFSK\15GSM\16STURBO\17HALF\20QUARTER\21HT20" \ "\22HT40U\23HT40D\24DFS\0254MSXMIT\26NOADHOC\27NOHOSTAP\03011D" /* * Useful combinations of channel characteristics. */ #define IEEE80211_CHAN_FHSS \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) #define IEEE80211_CHAN_A \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_B \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) #define IEEE80211_CHAN_PUREG \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_G \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) #define IEEE80211_CHAN_108A \ (IEEE80211_CHAN_A | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_108G \ (IEEE80211_CHAN_PUREG | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_ST \ (IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO) #define IEEE80211_CHAN_ALL \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \ IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \ IEEE80211_CHAN_HT) #define IEEE80211_CHAN_ALLTURBO \ (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO) #define IEEE80211_IS_CHAN_FHSS(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) #define IEEE80211_IS_CHAN_A(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) #define IEEE80211_IS_CHAN_B(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) #define IEEE80211_IS_CHAN_PUREG(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) #define IEEE80211_IS_CHAN_G(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) #define IEEE80211_IS_CHAN_ANYG(_c) \ (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) #define IEEE80211_IS_CHAN_ST(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) #define IEEE80211_IS_CHAN_108A(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) #define IEEE80211_IS_CHAN_108G(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) #define IEEE80211_IS_CHAN_2GHZ(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0) #define IEEE80211_IS_CHAN_5GHZ(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0) #define IEEE80211_IS_CHAN_PASSIVE(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0) #define IEEE80211_IS_CHAN_OFDM(_c) \ (((_c)->ic_flags & (IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)) != 0) #define IEEE80211_IS_CHAN_CCK(_c) \ (((_c)->ic_flags & (IEEE80211_CHAN_CCK | IEEE80211_CHAN_DYN)) != 0) #define IEEE80211_IS_CHAN_GFSK(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0) #define IEEE80211_IS_CHAN_TURBO(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0) #define IEEE80211_IS_CHAN_STURBO(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0) #define IEEE80211_IS_CHAN_DTURBO(_c) \ (((_c)->ic_flags & \ (IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO) #define IEEE80211_IS_CHAN_HALF(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0) #define IEEE80211_IS_CHAN_QUARTER(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0) #define IEEE80211_IS_CHAN_FULL(_c) \ (((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0) #define IEEE80211_IS_CHAN_GSM(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0) #define IEEE80211_IS_CHAN_HT(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) #define IEEE80211_IS_CHAN_HT20(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT20) != 0) #define IEEE80211_IS_CHAN_HT40(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT40) != 0) #define IEEE80211_IS_CHAN_HT40U(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT40U) != 0) #define IEEE80211_IS_CHAN_HT40D(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_HT40D) != 0) #define IEEE80211_IS_CHAN_HTA(_c) \ (IEEE80211_IS_CHAN_5GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) #define IEEE80211_IS_CHAN_HTG(_c) \ (IEEE80211_IS_CHAN_2GHZ(_c) && \ ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) #define IEEE80211_IS_CHAN_DFS(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_DFS) != 0) #define IEEE80211_IS_CHAN_NOADHOC(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_NOADHOC) != 0) #define IEEE80211_IS_CHAN_NOHOSTAP(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_NOHOSTAP) != 0) #define IEEE80211_IS_CHAN_11D(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_11D) != 0) #define IEEE80211_CHAN2IEEE(_c) (_c)->ic_ieee /* dynamic state */ #define IEEE80211_CHANSTATE_RADAR 0x01 /* radar detected */ #define IEEE80211_CHANSTATE_CACDONE 0x02 /* CAC completed */ #define IEEE80211_CHANSTATE_CWINT 0x04 /* interference detected */ #define IEEE80211_CHANSTATE_NORADAR 0x10 /* post notify on radar clear */ #define IEEE80211_IS_CHAN_RADAR(_c) \ (((_c)->ic_state & IEEE80211_CHANSTATE_RADAR) != 0) #define IEEE80211_IS_CHAN_CACDONE(_c) \ (((_c)->ic_state & IEEE80211_CHANSTATE_CACDONE) != 0) #define IEEE80211_IS_CHAN_CWINT(_c) \ (((_c)->ic_state & IEEE80211_CHANSTATE_CWINT) != 0) /* ni_chan encoding for FH phy */ #define IEEE80211_FH_CHANMOD 80 #define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat)) #define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1) #define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD) #define IEEE80211_TID_SIZE (WME_NUM_TID+1) /* WME TID's +1 for non-QoS */ #define IEEE80211_NONQOS_TID WME_NUM_TID /* index for non-QoS sta */ /* * The 802.11 spec says at most 2007 stations may be * associated at once. For most AP's this is way more * than is feasible so we use a default of 128. This * number may be overridden by the driver and/or by * user configuration but may not be less than IEEE80211_AID_MIN. */ #define IEEE80211_AID_DEF 128 #define IEEE80211_AID_MIN 16 /* * 802.11 rate set. */ #define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ #define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ struct ieee80211_rateset { uint8_t rs_nrates; uint8_t rs_rates[IEEE80211_RATE_MAXSIZE]; }; /* * 802.11n variant of ieee80211_rateset. Instead of * legacy rates the entries are MCS rates. We define * the structure such that it can be used interchangeably * with an ieee80211_rateset (modulo structure size). */ #define IEEE80211_HTRATE_MAXSIZE 127 struct ieee80211_htrateset { uint8_t rs_nrates; uint8_t rs_rates[IEEE80211_HTRATE_MAXSIZE]; }; #define IEEE80211_RATE_MCS 0x80 /* * Per-mode transmit parameters/controls visible to user space. * These can be used to set fixed transmit rate for all operating * modes or on a per-client basis according to the capabilities * of the client (e.g. an 11b client associated to an 11g ap). * * MCS are distinguished from legacy rates by or'ing in 0x80. */ struct ieee80211_txparam { uint8_t ucastrate; /* ucast data rate (legacy/MCS|0x80) */ uint8_t mgmtrate; /* mgmt frame rate (legacy/MCS|0x80) */ uint8_t mcastrate; /* multicast rate (legacy/MCS|0x80) */ uint8_t maxretry; /* max unicast data retry count */ }; /* * Per-mode roaming state visible to user space. There are two * thresholds that control whether roaming is considered; when * either is exceeded the 802.11 layer will check the scan cache * for another AP. If the cache is stale then a scan may be * triggered. */ struct ieee80211_roamparam { int8_t rssi; /* rssi thresh (.5 dBm) */ uint8_t rate; /* tx rate thresh (.5 Mb/s or MCS) */ uint16_t pad; /* reserve */ }; /* * Regulatory Information. */ struct ieee80211_regdomain { uint16_t regdomain; /* SKU */ uint16_t country; /* ISO country code */ uint8_t location; /* I (indoor), O (outdoor), other */ uint8_t ecm; /* Extended Channel Mode */ char isocc[2]; /* country code string */ short pad[2]; }; /* * MIMO antenna/radio state. */ struct ieee80211_mimo_info { int8_t rssi[3]; /* per-antenna rssi */ int8_t noise[3]; /* per-antenna noise floor */ uint32_t evm[3]; /* EVM data */ }; #endif /* _NET80211__IEEE80211_H_ */