/*- * Copyright (c) 2009, Oleksandr Tymoshenko * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * AR71XX gigabit ethernet driver */ #ifdef HAVE_KERNEL_OPTION_HEADERS #include "opt_device_polling.h" #endif #include "opt_arge.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "opt_arge.h" #if defined(ARGE_MDIO) #include #include #include "mdio_if.h" #endif MODULE_DEPEND(arge, ether, 1, 1, 1); MODULE_DEPEND(arge, miibus, 1, 1, 1); MODULE_VERSION(arge, 1); #include "miibus_if.h" #include #include #include /* XXX tsk! */ #include /* XXX tsk! */ #include #include #include #include typedef enum { ARGE_DBG_MII = 0x00000001, ARGE_DBG_INTR = 0x00000002, ARGE_DBG_TX = 0x00000004, ARGE_DBG_RX = 0x00000008, ARGE_DBG_ERR = 0x00000010, ARGE_DBG_RESET = 0x00000020, ARGE_DBG_PLL = 0x00000040, } arge_debug_flags; static const char * arge_miicfg_str[] = { "NONE", "GMII", "MII", "RGMII", "RMII", "SGMII" }; #ifdef ARGE_DEBUG #define ARGEDEBUG(_sc, _m, ...) \ do { \ if ((_m) & (_sc)->arge_debug) \ device_printf((_sc)->arge_dev, __VA_ARGS__); \ } while (0) #else #define ARGEDEBUG(_sc, _m, ...) #endif static int arge_attach(device_t); static int arge_detach(device_t); static void arge_flush_ddr(struct arge_softc *); static int arge_ifmedia_upd(struct ifnet *); static void arge_ifmedia_sts(struct ifnet *, struct ifmediareq *); static int arge_ioctl(struct ifnet *, u_long, caddr_t); static void arge_init(void *); static void arge_init_locked(struct arge_softc *); static void arge_link_task(void *, int); static void arge_update_link_locked(struct arge_softc *sc); static void arge_set_pll(struct arge_softc *, int, int); static int arge_miibus_readreg(device_t, int, int); static void arge_miibus_statchg(device_t); static int arge_miibus_writereg(device_t, int, int, int); static int arge_probe(device_t); static void arge_reset_dma(struct arge_softc *); static int arge_resume(device_t); static int arge_rx_ring_init(struct arge_softc *); static void arge_rx_ring_free(struct arge_softc *sc); static int arge_tx_ring_init(struct arge_softc *); static void arge_tx_ring_free(struct arge_softc *); #ifdef DEVICE_POLLING static int arge_poll(struct ifnet *, enum poll_cmd, int); #endif static int arge_shutdown(device_t); static void arge_start(struct ifnet *); static void arge_start_locked(struct ifnet *); static void arge_stop(struct arge_softc *); static int arge_suspend(device_t); static int arge_rx_locked(struct arge_softc *); static void arge_tx_locked(struct arge_softc *); static void arge_intr(void *); static int arge_intr_filter(void *); static void arge_tick(void *); static void arge_hinted_child(device_t bus, const char *dname, int dunit); /* * ifmedia callbacks for multiPHY MAC */ void arge_multiphy_mediastatus(struct ifnet *, struct ifmediareq *); int arge_multiphy_mediachange(struct ifnet *); static void arge_dmamap_cb(void *, bus_dma_segment_t *, int, int); static int arge_dma_alloc(struct arge_softc *); static void arge_dma_free(struct arge_softc *); static int arge_newbuf(struct arge_softc *, int); static __inline void arge_fixup_rx(struct mbuf *); static device_method_t arge_methods[] = { /* Device interface */ DEVMETHOD(device_probe, arge_probe), DEVMETHOD(device_attach, arge_attach), DEVMETHOD(device_detach, arge_detach), DEVMETHOD(device_suspend, arge_suspend), DEVMETHOD(device_resume, arge_resume), DEVMETHOD(device_shutdown, arge_shutdown), /* MII interface */ DEVMETHOD(miibus_readreg, arge_miibus_readreg), DEVMETHOD(miibus_writereg, arge_miibus_writereg), DEVMETHOD(miibus_statchg, arge_miibus_statchg), /* bus interface */ DEVMETHOD(bus_add_child, device_add_child_ordered), DEVMETHOD(bus_hinted_child, arge_hinted_child), DEVMETHOD_END }; static driver_t arge_driver = { "arge", arge_methods, sizeof(struct arge_softc) }; static devclass_t arge_devclass; DRIVER_MODULE(arge, nexus, arge_driver, arge_devclass, 0, 0); DRIVER_MODULE(miibus, arge, miibus_driver, miibus_devclass, 0, 0); #if defined(ARGE_MDIO) static int argemdio_probe(device_t); static int argemdio_attach(device_t); static int argemdio_detach(device_t); /* * Declare an additional, separate driver for accessing the MDIO bus. */ static device_method_t argemdio_methods[] = { /* Device interface */ DEVMETHOD(device_probe, argemdio_probe), DEVMETHOD(device_attach, argemdio_attach), DEVMETHOD(device_detach, argemdio_detach), /* bus interface */ DEVMETHOD(bus_add_child, device_add_child_ordered), /* MDIO access */ DEVMETHOD(mdio_readreg, arge_miibus_readreg), DEVMETHOD(mdio_writereg, arge_miibus_writereg), }; DEFINE_CLASS_0(argemdio, argemdio_driver, argemdio_methods, sizeof(struct arge_softc)); static devclass_t argemdio_devclass; DRIVER_MODULE(miiproxy, arge, miiproxy_driver, miiproxy_devclass, 0, 0); DRIVER_MODULE(argemdio, nexus, argemdio_driver, argemdio_devclass, 0, 0); DRIVER_MODULE(mdio, argemdio, mdio_driver, mdio_devclass, 0, 0); #endif static struct mtx miibus_mtx; MTX_SYSINIT(miibus_mtx, &miibus_mtx, "arge mii lock", MTX_DEF); /* * Flushes all * * XXX this needs to be done at interrupt time! Grr! */ static void arge_flush_ddr(struct arge_softc *sc) { switch (sc->arge_mac_unit) { case 0: ar71xx_device_flush_ddr(AR71XX_CPU_DDR_FLUSH_GE0); break; case 1: ar71xx_device_flush_ddr(AR71XX_CPU_DDR_FLUSH_GE1); break; default: device_printf(sc->arge_dev, "%s: unknown unit (%d)\n", __func__, sc->arge_mac_unit); break; } } static int arge_probe(device_t dev) { device_set_desc(dev, "Atheros AR71xx built-in ethernet interface"); return (BUS_PROBE_NOWILDCARD); } #ifdef ARGE_DEBUG static void arge_attach_intr_sysctl(device_t dev, struct sysctl_oid_list *parent) { struct arge_softc *sc = device_get_softc(dev); struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev); struct sysctl_oid *tree = device_get_sysctl_tree(dev); struct sysctl_oid_list *child = SYSCTL_CHILDREN(tree); char sn[8]; int i; tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "intr", CTLFLAG_RD, NULL, "Interrupt statistics"); child = SYSCTL_CHILDREN(tree); for (i = 0; i < 32; i++) { snprintf(sn, sizeof(sn), "%d", i); SYSCTL_ADD_UINT(ctx, child, OID_AUTO, sn, CTLFLAG_RD, &sc->intr_stats.count[i], 0, ""); } } #endif static void arge_attach_sysctl(device_t dev) { struct arge_softc *sc = device_get_softc(dev); struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev); struct sysctl_oid *tree = device_get_sysctl_tree(dev); #ifdef ARGE_DEBUG SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "debug", CTLFLAG_RW, &sc->arge_debug, 0, "arge interface debugging flags"); arge_attach_intr_sysctl(dev, SYSCTL_CHILDREN(tree)); #endif SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_pkts_aligned", CTLFLAG_RW, &sc->stats.tx_pkts_aligned, 0, "number of TX aligned packets"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_pkts_unaligned", CTLFLAG_RW, &sc->stats.tx_pkts_unaligned, 0, "number of TX unaligned packets"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_pkts_unaligned_start", CTLFLAG_RW, &sc->stats.tx_pkts_unaligned_start, 0, "number of TX unaligned packets (start)"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_pkts_unaligned_len", CTLFLAG_RW, &sc->stats.tx_pkts_unaligned_len, 0, "number of TX unaligned packets (len)"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_pkts_nosegs", CTLFLAG_RW, &sc->stats.tx_pkts_nosegs, 0, "number of TX packets fail with no ring slots avail"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "intr_stray_filter", CTLFLAG_RW, &sc->stats.intr_stray, 0, "number of stray interrupts (filter)"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "intr_stray_intr", CTLFLAG_RW, &sc->stats.intr_stray2, 0, "number of stray interrupts (intr)"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "intr_ok", CTLFLAG_RW, &sc->stats.intr_ok, 0, "number of OK interrupts"); #ifdef ARGE_DEBUG SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_prod", CTLFLAG_RW, &sc->arge_cdata.arge_tx_prod, 0, ""); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_cons", CTLFLAG_RW, &sc->arge_cdata.arge_tx_cons, 0, ""); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "tx_cnt", CTLFLAG_RW, &sc->arge_cdata.arge_tx_cnt, 0, ""); #endif } static void arge_reset_mac(struct arge_softc *sc) { uint32_t reg; uint32_t reset_reg; ARGEDEBUG(sc, ARGE_DBG_RESET, "%s called\n", __func__); /* Step 1. Soft-reset MAC */ ARGE_SET_BITS(sc, AR71XX_MAC_CFG1, MAC_CFG1_SOFT_RESET); DELAY(20); /* Step 2. Punt the MAC core from the central reset register */ /* * XXX TODO: migrate this (and other) chip specific stuff into * a chipdef method. */ if (sc->arge_mac_unit == 0) { reset_reg = RST_RESET_GE0_MAC; } else { reset_reg = RST_RESET_GE1_MAC; } /* * AR934x (and later) also needs the MDIO block reset. * XXX should methodize this! */ if (ar71xx_soc == AR71XX_SOC_AR9341 || ar71xx_soc == AR71XX_SOC_AR9342 || ar71xx_soc == AR71XX_SOC_AR9344) { if (sc->arge_mac_unit == 0) { reset_reg |= AR934X_RESET_GE0_MDIO; } else { reset_reg |= AR934X_RESET_GE1_MDIO; } } if (ar71xx_soc == AR71XX_SOC_QCA9556 || ar71xx_soc == AR71XX_SOC_QCA9558) { if (sc->arge_mac_unit == 0) { reset_reg |= QCA955X_RESET_GE0_MDIO; } else { reset_reg |= QCA955X_RESET_GE1_MDIO; } } ar71xx_device_stop(reset_reg); DELAY(100); ar71xx_device_start(reset_reg); /* Step 3. Reconfigure MAC block */ ARGE_WRITE(sc, AR71XX_MAC_CFG1, MAC_CFG1_SYNC_RX | MAC_CFG1_RX_ENABLE | MAC_CFG1_SYNC_TX | MAC_CFG1_TX_ENABLE); reg = ARGE_READ(sc, AR71XX_MAC_CFG2); reg |= MAC_CFG2_ENABLE_PADCRC | MAC_CFG2_LENGTH_FIELD ; ARGE_WRITE(sc, AR71XX_MAC_CFG2, reg); ARGE_WRITE(sc, AR71XX_MAC_MAX_FRAME_LEN, 1536); } /* * These values map to the divisor values programmed into * AR71XX_MAC_MII_CFG. * * The index of each value corresponds to the divisor section * value in AR71XX_MAC_MII_CFG (ie, table[0] means '0' in * AR71XX_MAC_MII_CFG, table[1] means '1', etc.) */ static const uint32_t ar71xx_mdio_div_table[] = { 4, 4, 6, 8, 10, 14, 20, 28, }; static const uint32_t ar7240_mdio_div_table[] = { 2, 2, 4, 6, 8, 12, 18, 26, 32, 40, 48, 56, 62, 70, 78, 96, }; static const uint32_t ar933x_mdio_div_table[] = { 4, 4, 6, 8, 10, 14, 20, 28, 34, 42, 50, 58, 66, 74, 82, 98, }; /* * Lookup the divisor to use based on the given frequency. * * Returns the divisor to use, or -ve on error. */ static int arge_mdio_get_divider(struct arge_softc *sc, unsigned long mdio_clock) { unsigned long ref_clock, t; const uint32_t *table; int ndivs; int i; /* * This is the base MDIO frequency on the SoC. * The dividers .. well, divide. Duh. */ ref_clock = ar71xx_mdio_freq(); /* * If either clock is undefined, just tell the * caller to fall through to the defaults. */ if (ref_clock == 0 || mdio_clock == 0) return (-EINVAL); /* * Pick the correct table! */ switch (ar71xx_soc) { case AR71XX_SOC_AR9330: case AR71XX_SOC_AR9331: case AR71XX_SOC_AR9341: case AR71XX_SOC_AR9342: case AR71XX_SOC_AR9344: case AR71XX_SOC_QCA9556: case AR71XX_SOC_QCA9558: table = ar933x_mdio_div_table; ndivs = nitems(ar933x_mdio_div_table); break; case AR71XX_SOC_AR7240: case AR71XX_SOC_AR7241: case AR71XX_SOC_AR7242: table = ar7240_mdio_div_table; ndivs = nitems(ar7240_mdio_div_table); break; default: table = ar71xx_mdio_div_table; ndivs = nitems(ar71xx_mdio_div_table); } /* * Now, walk through the list and find the first divisor * that falls under the target MDIO frequency. * * The divisors go up, but the corresponding frequencies * are actually decreasing. */ for (i = 0; i < ndivs; i++) { t = ref_clock / table[i]; if (t <= mdio_clock) { return (i); } } ARGEDEBUG(sc, ARGE_DBG_RESET, "No divider found; MDIO=%lu Hz; target=%lu Hz\n", ref_clock, mdio_clock); return (-ENOENT); } /* * Fetch the MDIO bus clock rate. * * For now, the default is DIV_28 for everything * bar AR934x, which will be DIV_58. * * It will definitely need updating to take into account * the MDIO bus core clock rate and the target clock * rate for the chip. */ static uint32_t arge_fetch_mdiobus_clock_rate(struct arge_softc *sc) { int mdio_freq, div; /* * Is the MDIO frequency defined? If so, find a divisor that * makes reasonable sense. Don't overshoot the frequency. */ if (resource_int_value(device_get_name(sc->arge_dev), device_get_unit(sc->arge_dev), "mdio_freq", &mdio_freq) == 0) { sc->arge_mdiofreq = mdio_freq; div = arge_mdio_get_divider(sc, sc->arge_mdiofreq); if (bootverbose) device_printf(sc->arge_dev, "%s: mdio ref freq=%llu Hz, target freq=%llu Hz," " divisor index=%d\n", __func__, (unsigned long long) ar71xx_mdio_freq(), (unsigned long long) mdio_freq, div); if (div >= 0) return (div); } /* * Default value(s). * * XXX obviously these need .. fixing. * * From Linux/OpenWRT: * * + 7240? DIV_6 * + Builtin-switch port and not 934x? DIV_10 * + Not built-in switch port and 934x? DIV_58 * + .. else DIV_28. */ switch (ar71xx_soc) { case AR71XX_SOC_AR9341: case AR71XX_SOC_AR9342: case AR71XX_SOC_AR9344: case AR71XX_SOC_QCA9556: case AR71XX_SOC_QCA9558: return (MAC_MII_CFG_CLOCK_DIV_58); break; default: return (MAC_MII_CFG_CLOCK_DIV_28); } } static void arge_reset_miibus(struct arge_softc *sc) { uint32_t mdio_div; mdio_div = arge_fetch_mdiobus_clock_rate(sc); /* * XXX AR934x and later; should we be also resetting the * MDIO block(s) using the reset register block? */ /* Reset MII bus; program in the default divisor */ ARGE_WRITE(sc, AR71XX_MAC_MII_CFG, MAC_MII_CFG_RESET | mdio_div); DELAY(100); ARGE_WRITE(sc, AR71XX_MAC_MII_CFG, mdio_div); DELAY(100); } static void arge_fetch_pll_config(struct arge_softc *sc) { long int val; if (resource_long_value(device_get_name(sc->arge_dev), device_get_unit(sc->arge_dev), "pll_10", &val) == 0) { sc->arge_pllcfg.pll_10 = val; device_printf(sc->arge_dev, "%s: pll_10 = 0x%x\n", __func__, (int) val); } if (resource_long_value(device_get_name(sc->arge_dev), device_get_unit(sc->arge_dev), "pll_100", &val) == 0) { sc->arge_pllcfg.pll_100 = val; device_printf(sc->arge_dev, "%s: pll_100 = 0x%x\n", __func__, (int) val); } if (resource_long_value(device_get_name(sc->arge_dev), device_get_unit(sc->arge_dev), "pll_1000", &val) == 0) { sc->arge_pllcfg.pll_1000 = val; device_printf(sc->arge_dev, "%s: pll_1000 = 0x%x\n", __func__, (int) val); } } static int arge_attach(device_t dev) { struct ifnet *ifp; struct arge_softc *sc; int error = 0, rid, i; uint32_t hint; long eeprom_mac_addr = 0; int miicfg = 0; int readascii = 0; int local_mac = 0; uint8_t local_macaddr[ETHER_ADDR_LEN]; char * local_macstr; char devid_str[32]; int count; sc = device_get_softc(dev); sc->arge_dev = dev; sc->arge_mac_unit = device_get_unit(dev); /* * See if there's a "board" MAC address hint available for * this particular device. * * This is in the environment - it'd be nice to use the resource_*() * routines, but at the moment the system is booting, the resource hints * are set to the 'static' map so they're not pulling from kenv. */ snprintf(devid_str, 32, "hint.%s.%d.macaddr", device_get_name(dev), device_get_unit(dev)); if ((local_macstr = kern_getenv(devid_str)) != NULL) { uint32_t tmpmac[ETHER_ADDR_LEN]; /* Have a MAC address; should use it */ device_printf(dev, "Overriding MAC address from environment: '%s'\n", local_macstr); /* Extract out the MAC address */ /* XXX this should all be a generic method */ count = sscanf(local_macstr, "%x%*c%x%*c%x%*c%x%*c%x%*c%x", &tmpmac[0], &tmpmac[1], &tmpmac[2], &tmpmac[3], &tmpmac[4], &tmpmac[5]); if (count == 6) { /* Valid! */ local_mac = 1; for (i = 0; i < ETHER_ADDR_LEN; i++) local_macaddr[i] = tmpmac[i]; } /* Done! */ freeenv(local_macstr); local_macstr = NULL; } /* * Hardware workarounds. */ switch (ar71xx_soc) { case AR71XX_SOC_AR9330: case AR71XX_SOC_AR9331: case AR71XX_SOC_AR9341: case AR71XX_SOC_AR9342: case AR71XX_SOC_AR9344: case AR71XX_SOC_QCA9556: case AR71XX_SOC_QCA9558: /* Arbitrary alignment */ sc->arge_hw_flags |= ARGE_HW_FLG_TX_DESC_ALIGN_1BYTE; sc->arge_hw_flags |= ARGE_HW_FLG_RX_DESC_ALIGN_1BYTE; break; default: sc->arge_hw_flags |= ARGE_HW_FLG_TX_DESC_ALIGN_4BYTE; sc->arge_hw_flags |= ARGE_HW_FLG_RX_DESC_ALIGN_4BYTE; break; } /* * Some units (eg the TP-Link WR-1043ND) do not have a convenient * EEPROM location to read the ethernet MAC address from. * OpenWRT simply snaffles it from a fixed location. * * Since multiple units seem to use this feature, include * a method of setting the MAC address based on an flash location * in CPU address space. * * Some vendors have decided to store the mac address as a literal * string of 18 characters in xx:xx:xx:xx:xx:xx format instead of * an array of numbers. Expose a hint to turn on this conversion * feature via strtol() */ if (local_mac == 0 && resource_long_value(device_get_name(dev), device_get_unit(dev), "eeprommac", &eeprom_mac_addr) == 0) { local_mac = 1; int i; const char *mac = (const char *) MIPS_PHYS_TO_KSEG1(eeprom_mac_addr); device_printf(dev, "Overriding MAC from EEPROM\n"); if (resource_int_value(device_get_name(dev), device_get_unit(dev), "readascii", &readascii) == 0) { device_printf(dev, "Vendor stores MAC in ASCII format\n"); for (i = 0; i < 6; i++) { local_macaddr[i] = strtol(&(mac[i*3]), NULL, 16); } } else { for (i = 0; i < 6; i++) { local_macaddr[i] = mac[i]; } } } KASSERT(((sc->arge_mac_unit == 0) || (sc->arge_mac_unit == 1)), ("if_arge: Only MAC0 and MAC1 supported")); /* * Fetch the PLL configuration. */ arge_fetch_pll_config(sc); /* * Get the MII configuration, if applicable. */ if (resource_int_value(device_get_name(dev), device_get_unit(dev), "miimode", &miicfg) == 0) { /* XXX bounds check? */ device_printf(dev, "%s: overriding MII mode to '%s'\n", __func__, arge_miicfg_str[miicfg]); sc->arge_miicfg = miicfg; } /* * Get which PHY of 5 available we should use for this unit */ if (resource_int_value(device_get_name(dev), device_get_unit(dev), "phymask", &sc->arge_phymask) != 0) { /* * Use port 4 (WAN) for GE0. For any other port use * its PHY the same as its unit number */ if (sc->arge_mac_unit == 0) sc->arge_phymask = (1 << 4); else /* Use all phys up to 4 */ sc->arge_phymask = (1 << 4) - 1; device_printf(dev, "No PHY specified, using mask %d\n", sc->arge_phymask); } /* * Get default/hard-coded media & duplex mode. */ if (resource_int_value(device_get_name(dev), device_get_unit(dev), "media", &hint) != 0) hint = 0; if (hint == 1000) sc->arge_media_type = IFM_1000_T; else if (hint == 100) sc->arge_media_type = IFM_100_TX; else if (hint == 10) sc->arge_media_type = IFM_10_T; else sc->arge_media_type = 0; if (resource_int_value(device_get_name(dev), device_get_unit(dev), "fduplex", &hint) != 0) hint = 1; if (hint) sc->arge_duplex_mode = IFM_FDX; else sc->arge_duplex_mode = 0; mtx_init(&sc->arge_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF); callout_init_mtx(&sc->arge_stat_callout, &sc->arge_mtx, 0); TASK_INIT(&sc->arge_link_task, 0, arge_link_task, sc); /* Map control/status registers. */ sc->arge_rid = 0; sc->arge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->arge_rid, RF_ACTIVE | RF_SHAREABLE); if (sc->arge_res == NULL) { device_printf(dev, "couldn't map memory\n"); error = ENXIO; goto fail; } /* Allocate interrupts */ rid = 0; sc->arge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); if (sc->arge_irq == NULL) { device_printf(dev, "couldn't map interrupt\n"); error = ENXIO; goto fail; } /* Allocate ifnet structure. */ ifp = sc->arge_ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { device_printf(dev, "couldn't allocate ifnet structure\n"); error = ENOSPC; goto fail; } ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = arge_ioctl; ifp->if_start = arge_start; ifp->if_init = arge_init; sc->arge_if_flags = ifp->if_flags; /* XXX: add real size */ IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); ifp->if_snd.ifq_maxlen = ifqmaxlen; IFQ_SET_READY(&ifp->if_snd); /* Tell the upper layer(s) we support long frames. */ ifp->if_capabilities |= IFCAP_VLAN_MTU; ifp->if_capenable = ifp->if_capabilities; #ifdef DEVICE_POLLING ifp->if_capabilities |= IFCAP_POLLING; #endif /* If there's a local mac defined, copy that in */ if (local_mac == 1) { (void) ar71xx_mac_addr_init(sc->arge_eaddr, local_macaddr, 0, 0); } else { /* * No MAC address configured. Generate the random one. */ if (bootverbose) device_printf(dev, "Generating random ethernet address.\n"); (void) ar71xx_mac_addr_random_init(sc->arge_eaddr); } if (arge_dma_alloc(sc) != 0) { error = ENXIO; goto fail; } /* * Don't do this for the MDIO bus case - it's already done * as part of the MDIO bus attachment. */ #if !defined(ARGE_MDIO) /* Initialize the MAC block */ arge_reset_mac(sc); arge_reset_miibus(sc); #endif /* Configure MII mode, just for convienence */ if (sc->arge_miicfg != 0) ar71xx_device_set_mii_if(sc->arge_mac_unit, sc->arge_miicfg); /* * Set all Ethernet address registers to the same initial values * set all four addresses to 66-88-aa-cc-dd-ee */ ARGE_WRITE(sc, AR71XX_MAC_STA_ADDR1, (sc->arge_eaddr[2] << 24) | (sc->arge_eaddr[3] << 16) | (sc->arge_eaddr[4] << 8) | sc->arge_eaddr[5]); ARGE_WRITE(sc, AR71XX_MAC_STA_ADDR2, (sc->arge_eaddr[0] << 8) | sc->arge_eaddr[1]); ARGE_WRITE(sc, AR71XX_MAC_FIFO_CFG0, FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT); /* * SoC specific bits. */ switch (ar71xx_soc) { case AR71XX_SOC_AR7240: case AR71XX_SOC_AR7241: case AR71XX_SOC_AR7242: case AR71XX_SOC_AR9330: case AR71XX_SOC_AR9331: case AR71XX_SOC_AR9341: case AR71XX_SOC_AR9342: case AR71XX_SOC_AR9344: case AR71XX_SOC_QCA9556: case AR71XX_SOC_QCA9558: ARGE_WRITE(sc, AR71XX_MAC_FIFO_CFG1, 0x0010ffff); ARGE_WRITE(sc, AR71XX_MAC_FIFO_CFG2, 0x015500aa); break; /* AR71xx, AR913x */ default: ARGE_WRITE(sc, AR71XX_MAC_FIFO_CFG1, 0x0fff0000); ARGE_WRITE(sc, AR71XX_MAC_FIFO_CFG2, 0x00001fff); } ARGE_WRITE(sc, AR71XX_MAC_FIFO_RX_FILTMATCH, FIFO_RX_FILTMATCH_DEFAULT); ARGE_WRITE(sc, AR71XX_MAC_FIFO_RX_FILTMASK, FIFO_RX_FILTMASK_DEFAULT); #if defined(ARGE_MDIO) sc->arge_miiproxy = mii_attach_proxy(sc->arge_dev); #endif device_printf(sc->arge_dev, "finishing attachment, phymask %04x" ", proxy %s \n", sc->arge_phymask, sc->arge_miiproxy == NULL ? "null" : "set"); for (i = 0; i < ARGE_NPHY; i++) { if (((1 << i) & sc->arge_phymask) != 0) { error = mii_attach(sc->arge_miiproxy != NULL ? sc->arge_miiproxy : sc->arge_dev, &sc->arge_miibus, sc->arge_ifp, arge_ifmedia_upd, arge_ifmedia_sts, BMSR_DEFCAPMASK, i, MII_OFFSET_ANY, 0); if (error != 0) { device_printf(sc->arge_dev, "unable to attach" " PHY %d: %d\n", i, error); goto fail; } } } if (sc->arge_miibus == NULL) { /* no PHY, so use hard-coded values */ ifmedia_init(&sc->arge_ifmedia, 0, arge_multiphy_mediachange, arge_multiphy_mediastatus); ifmedia_add(&sc->arge_ifmedia, IFM_ETHER | sc->arge_media_type | sc->arge_duplex_mode, 0, NULL); ifmedia_set(&sc->arge_ifmedia, IFM_ETHER | sc->arge_media_type | sc->arge_duplex_mode); arge_set_pll(sc, sc->arge_media_type, sc->arge_duplex_mode); } /* Call MI attach routine. */ ether_ifattach(sc->arge_ifp, sc->arge_eaddr); /* Hook interrupt last to avoid having to lock softc */ error = bus_setup_intr(sc->arge_dev, sc->arge_irq, INTR_TYPE_NET | INTR_MPSAFE, arge_intr_filter, arge_intr, sc, &sc->arge_intrhand); if (error) { device_printf(sc->arge_dev, "couldn't set up irq\n"); ether_ifdetach(sc->arge_ifp); goto fail; } /* setup sysctl variables */ arge_attach_sysctl(sc->arge_dev); fail: if (error) arge_detach(dev); return (error); } static int arge_detach(device_t dev) { struct arge_softc *sc = device_get_softc(dev); struct ifnet *ifp = sc->arge_ifp; KASSERT(mtx_initialized(&sc->arge_mtx), ("arge mutex not initialized")); /* These should only be active if attach succeeded */ if (device_is_attached(dev)) { ARGE_LOCK(sc); sc->arge_detach = 1; #ifdef DEVICE_POLLING if (ifp->if_capenable & IFCAP_POLLING) ether_poll_deregister(ifp); #endif arge_stop(sc); ARGE_UNLOCK(sc); taskqueue_drain(taskqueue_swi, &sc->arge_link_task); ether_ifdetach(ifp); } if (sc->arge_miibus) device_delete_child(dev, sc->arge_miibus); if (sc->arge_miiproxy) device_delete_child(dev, sc->arge_miiproxy); bus_generic_detach(dev); if (sc->arge_intrhand) bus_teardown_intr(dev, sc->arge_irq, sc->arge_intrhand); if (sc->arge_res) bus_release_resource(dev, SYS_RES_MEMORY, sc->arge_rid, sc->arge_res); if (ifp) if_free(ifp); arge_dma_free(sc); mtx_destroy(&sc->arge_mtx); return (0); } static int arge_suspend(device_t dev) { panic("%s", __func__); return 0; } static int arge_resume(device_t dev) { panic("%s", __func__); return 0; } static int arge_shutdown(device_t dev) { struct arge_softc *sc; sc = device_get_softc(dev); ARGE_LOCK(sc); arge_stop(sc); ARGE_UNLOCK(sc); return (0); } static void arge_hinted_child(device_t bus, const char *dname, int dunit) { BUS_ADD_CHILD(bus, 0, dname, dunit); device_printf(bus, "hinted child %s%d\n", dname, dunit); } static int arge_miibus_readreg(device_t dev, int phy, int reg) { struct arge_softc * sc = device_get_softc(dev); int i, result; uint32_t addr = (phy << MAC_MII_PHY_ADDR_SHIFT) | (reg & MAC_MII_REG_MASK); mtx_lock(&miibus_mtx); ARGE_MDIO_WRITE(sc, AR71XX_MAC_MII_CMD, MAC_MII_CMD_WRITE); ARGE_MDIO_WRITE(sc, AR71XX_MAC_MII_ADDR, addr); ARGE_MDIO_WRITE(sc, AR71XX_MAC_MII_CMD, MAC_MII_CMD_READ); i = ARGE_MII_TIMEOUT; while ((ARGE_MDIO_READ(sc, AR71XX_MAC_MII_INDICATOR) & MAC_MII_INDICATOR_BUSY) && (i--)) { ARGE_MDIO_BARRIER_READ(sc); DELAY(5); } if (i < 0) { mtx_unlock(&miibus_mtx); ARGEDEBUG(sc, ARGE_DBG_MII, "%s timedout\n", __func__); /* XXX: return ERRNO istead? */ return (-1); } result = ARGE_MDIO_READ(sc, AR71XX_MAC_MII_STATUS) & MAC_MII_STATUS_MASK; ARGE_MDIO_BARRIER_READ(sc); ARGE_MDIO_WRITE(sc, AR71XX_MAC_MII_CMD, MAC_MII_CMD_WRITE); mtx_unlock(&miibus_mtx); ARGEDEBUG(sc, ARGE_DBG_MII, "%s: phy=%d, reg=%02x, value[%08x]=%04x\n", __func__, phy, reg, addr, result); return (result); } static int arge_miibus_writereg(device_t dev, int phy, int reg, int data) { struct arge_softc * sc = device_get_softc(dev); int i; uint32_t addr = (phy << MAC_MII_PHY_ADDR_SHIFT) | (reg & MAC_MII_REG_MASK); ARGEDEBUG(sc, ARGE_DBG_MII, "%s: phy=%d, reg=%02x, value=%04x\n", __func__, phy, reg, data); mtx_lock(&miibus_mtx); ARGE_MDIO_WRITE(sc, AR71XX_MAC_MII_ADDR, addr); ARGE_MDIO_WRITE(sc, AR71XX_MAC_MII_CONTROL, data); i = ARGE_MII_TIMEOUT; while ((ARGE_MDIO_READ(sc, AR71XX_MAC_MII_INDICATOR) & MAC_MII_INDICATOR_BUSY) && (i--)) { ARGE_MDIO_BARRIER_READ(sc); DELAY(5); } mtx_unlock(&miibus_mtx); if (i < 0) { ARGEDEBUG(sc, ARGE_DBG_MII, "%s timedout\n", __func__); /* XXX: return ERRNO istead? */ return (-1); } return (0); } static void arge_miibus_statchg(device_t dev) { struct arge_softc *sc; sc = device_get_softc(dev); taskqueue_enqueue(taskqueue_swi, &sc->arge_link_task); } static void arge_link_task(void *arg, int pending) { struct arge_softc *sc; sc = (struct arge_softc *)arg; ARGE_LOCK(sc); arge_update_link_locked(sc); ARGE_UNLOCK(sc); } static void arge_update_link_locked(struct arge_softc *sc) { struct mii_data *mii; struct ifnet *ifp; uint32_t media, duplex; mii = device_get_softc(sc->arge_miibus); ifp = sc->arge_ifp; if (mii == NULL || ifp == NULL || (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { return; } /* * If we have a static media type configured, then * use that. Some PHY configurations (eg QCA955x -> AR8327) * use a static speed/duplex between the SoC and switch, * even though the front-facing PHY speed changes. */ if (sc->arge_media_type != 0) { ARGEDEBUG(sc, ARGE_DBG_MII, "%s: fixed; media=%d, duplex=%d\n", __func__, sc->arge_media_type, sc->arge_duplex_mode); if (mii->mii_media_status & IFM_ACTIVE) { sc->arge_link_status = 1; } else { sc->arge_link_status = 0; } arge_set_pll(sc, sc->arge_media_type, sc->arge_duplex_mode); } if (mii->mii_media_status & IFM_ACTIVE) { media = IFM_SUBTYPE(mii->mii_media_active); if (media != IFM_NONE) { sc->arge_link_status = 1; duplex = mii->mii_media_active & IFM_GMASK; ARGEDEBUG(sc, ARGE_DBG_MII, "%s: media=%d, duplex=%d\n", __func__, media, duplex); arge_set_pll(sc, media, duplex); } } else { sc->arge_link_status = 0; } } static void arge_set_pll(struct arge_softc *sc, int media, int duplex) { uint32_t cfg, ifcontrol, rx_filtmask; uint32_t fifo_tx, pll; int if_speed; /* * XXX Verify - is this valid for all chips? * QCA955x (and likely some of the earlier chips!) define * this as nibble mode and byte mode, and those have to do * with the interface type (MII/SMII versus GMII/RGMII.) */ ARGEDEBUG(sc, ARGE_DBG_PLL, "set_pll(%04x, %s)\n", media, duplex == IFM_FDX ? "full" : "half"); cfg = ARGE_READ(sc, AR71XX_MAC_CFG2); cfg &= ~(MAC_CFG2_IFACE_MODE_1000 | MAC_CFG2_IFACE_MODE_10_100 | MAC_CFG2_FULL_DUPLEX); if (duplex == IFM_FDX) cfg |= MAC_CFG2_FULL_DUPLEX; ifcontrol = ARGE_READ(sc, AR71XX_MAC_IFCONTROL); ifcontrol &= ~MAC_IFCONTROL_SPEED; rx_filtmask = ARGE_READ(sc, AR71XX_MAC_FIFO_RX_FILTMASK); rx_filtmask &= ~FIFO_RX_MASK_BYTE_MODE; switch(media) { case IFM_10_T: cfg |= MAC_CFG2_IFACE_MODE_10_100; if_speed = 10; break; case IFM_100_TX: cfg |= MAC_CFG2_IFACE_MODE_10_100; ifcontrol |= MAC_IFCONTROL_SPEED; if_speed = 100; break; case IFM_1000_T: case IFM_1000_SX: cfg |= MAC_CFG2_IFACE_MODE_1000; rx_filtmask |= FIFO_RX_MASK_BYTE_MODE; if_speed = 1000; break; default: if_speed = 100; device_printf(sc->arge_dev, "Unknown media %d\n", media); } ARGEDEBUG(sc, ARGE_DBG_PLL, "%s: if_speed=%d\n", __func__, if_speed); switch (ar71xx_soc) { case AR71XX_SOC_AR7240: case AR71XX_SOC_AR7241: case AR71XX_SOC_AR7242: case AR71XX_SOC_AR9330: case AR71XX_SOC_AR9331: case AR71XX_SOC_AR9341: case AR71XX_SOC_AR9342: case AR71XX_SOC_AR9344: case AR71XX_SOC_QCA9556: case AR71XX_SOC_QCA9558: fifo_tx = 0x01f00140; break; case AR71XX_SOC_AR9130: case AR71XX_SOC_AR9132: fifo_tx = 0x00780fff; break; /* AR71xx */ default: fifo_tx = 0x008001ff; } ARGE_WRITE(sc, AR71XX_MAC_CFG2, cfg); ARGE_WRITE(sc, AR71XX_MAC_IFCONTROL, ifcontrol); ARGE_WRITE(sc, AR71XX_MAC_FIFO_RX_FILTMASK, rx_filtmask); ARGE_WRITE(sc, AR71XX_MAC_FIFO_TX_THRESHOLD, fifo_tx); /* fetch PLL registers */ pll = ar71xx_device_get_eth_pll(sc->arge_mac_unit, if_speed); ARGEDEBUG(sc, ARGE_DBG_PLL, "%s: pll=0x%x\n", __func__, pll); /* Override if required by platform data */ if (if_speed == 10 && sc->arge_pllcfg.pll_10 != 0) pll = sc->arge_pllcfg.pll_10; else if (if_speed == 100 && sc->arge_pllcfg.pll_100 != 0) pll = sc->arge_pllcfg.pll_100; else if (if_speed == 1000 && sc->arge_pllcfg.pll_1000 != 0) pll = sc->arge_pllcfg.pll_1000; ARGEDEBUG(sc, ARGE_DBG_PLL, "%s: final pll=0x%x\n", __func__, pll); /* XXX ensure pll != 0 */ ar71xx_device_set_pll_ge(sc->arge_mac_unit, if_speed, pll); /* set MII registers */ /* * This was introduced to match what the Linux ag71xx ethernet * driver does. For the AR71xx case, it does set the port * MII speed. However, if this is done, non-gigabit speeds * are not at all reliable when speaking via RGMII through * 'bridge' PHY port that's pretending to be a local PHY. * * Until that gets root caused, and until an AR71xx + normal * PHY board is tested, leave this disabled. */ #if 0 ar71xx_device_set_mii_speed(sc->arge_mac_unit, if_speed); #endif } static void arge_reset_dma(struct arge_softc *sc) { ARGEDEBUG(sc, ARGE_DBG_RESET, "%s: called\n", __func__); ARGE_WRITE(sc, AR71XX_DMA_RX_CONTROL, 0); ARGE_WRITE(sc, AR71XX_DMA_TX_CONTROL, 0); ARGE_WRITE(sc, AR71XX_DMA_RX_DESC, 0); ARGE_WRITE(sc, AR71XX_DMA_TX_DESC, 0); /* Clear all possible RX interrupts */ while(ARGE_READ(sc, AR71XX_DMA_RX_STATUS) & DMA_RX_STATUS_PKT_RECVD) ARGE_WRITE(sc, AR71XX_DMA_RX_STATUS, DMA_RX_STATUS_PKT_RECVD); /* * Clear all possible TX interrupts */ while(ARGE_READ(sc, AR71XX_DMA_TX_STATUS) & DMA_TX_STATUS_PKT_SENT) ARGE_WRITE(sc, AR71XX_DMA_TX_STATUS, DMA_TX_STATUS_PKT_SENT); /* * Now Rx/Tx errors */ ARGE_WRITE(sc, AR71XX_DMA_RX_STATUS, DMA_RX_STATUS_BUS_ERROR | DMA_RX_STATUS_OVERFLOW); ARGE_WRITE(sc, AR71XX_DMA_TX_STATUS, DMA_TX_STATUS_BUS_ERROR | DMA_TX_STATUS_UNDERRUN); /* * Force a DDR flush so any pending data is properly * flushed to RAM before underlying buffers are freed. */ arge_flush_ddr(sc); } static void arge_init(void *xsc) { struct arge_softc *sc = xsc; ARGE_LOCK(sc); arge_init_locked(sc); ARGE_UNLOCK(sc); } static void arge_init_locked(struct arge_softc *sc) { struct ifnet *ifp = sc->arge_ifp; struct mii_data *mii; ARGE_LOCK_ASSERT(sc); if ((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING)) return; /* Init circular RX list. */ if (arge_rx_ring_init(sc) != 0) { device_printf(sc->arge_dev, "initialization failed: no memory for rx buffers\n"); arge_stop(sc); return; } /* Init tx descriptors. */ arge_tx_ring_init(sc); arge_reset_dma(sc); if (sc->arge_miibus) { mii = device_get_softc(sc->arge_miibus); mii_mediachg(mii); } else { /* * Sun always shines over multiPHY interface */ sc->arge_link_status = 1; } ifp->if_drv_flags |= IFF_DRV_RUNNING; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; if (sc->arge_miibus) { callout_reset(&sc->arge_stat_callout, hz, arge_tick, sc); arge_update_link_locked(sc); } ARGE_WRITE(sc, AR71XX_DMA_TX_DESC, ARGE_TX_RING_ADDR(sc, 0)); ARGE_WRITE(sc, AR71XX_DMA_RX_DESC, ARGE_RX_RING_ADDR(sc, 0)); /* Start listening */ ARGE_WRITE(sc, AR71XX_DMA_RX_CONTROL, DMA_RX_CONTROL_EN); /* Enable interrupts */ ARGE_WRITE(sc, AR71XX_DMA_INTR, DMA_INTR_ALL); } /* * Return whether the mbuf chain is correctly aligned * for the arge TX engine. * * All the MACs have a length requirement: any non-final * fragment (ie, descriptor with MORE bit set) needs to have * a length divisible by 4. * * The AR71xx, AR913x require the start address also be * DWORD aligned. The later MACs don't. */ static int arge_mbuf_chain_is_tx_aligned(struct arge_softc *sc, struct mbuf *m0) { struct mbuf *m; for (m = m0; m != NULL; m = m->m_next) { /* * Only do this for chips that require it. */ if ((sc->arge_hw_flags & ARGE_HW_FLG_TX_DESC_ALIGN_4BYTE) && (mtod(m, intptr_t) & 3) != 0) { sc->stats.tx_pkts_unaligned_start++; return 0; } /* * All chips have this requirement for length. */ if ((m->m_next != NULL) && ((m->m_len & 0x03) != 0)) { sc->stats.tx_pkts_unaligned_len++; return 0; } } return 1; } /* * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data * pointers to the fragment pointers. */ static int arge_encap(struct arge_softc *sc, struct mbuf **m_head) { struct arge_txdesc *txd; struct arge_desc *desc, *prev_desc; bus_dma_segment_t txsegs[ARGE_MAXFRAGS]; int error, i, nsegs, prod, prev_prod; struct mbuf *m; ARGE_LOCK_ASSERT(sc); /* * Fix mbuf chain based on hardware alignment constraints. */ m = *m_head; if (! arge_mbuf_chain_is_tx_aligned(sc, m)) { sc->stats.tx_pkts_unaligned++; m = m_defrag(*m_head, M_NOWAIT); if (m == NULL) { *m_head = NULL; return (ENOBUFS); } *m_head = m; } else sc->stats.tx_pkts_aligned++; prod = sc->arge_cdata.arge_tx_prod; txd = &sc->arge_cdata.arge_txdesc[prod]; error = bus_dmamap_load_mbuf_sg(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap, *m_head, txsegs, &nsegs, BUS_DMA_NOWAIT); if (error == EFBIG) { panic("EFBIG"); } else if (error != 0) return (error); if (nsegs == 0) { m_freem(*m_head); *m_head = NULL; return (EIO); } /* Check number of available descriptors. */ if (sc->arge_cdata.arge_tx_cnt + nsegs >= (ARGE_TX_RING_COUNT - 2)) { bus_dmamap_unload(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap); sc->stats.tx_pkts_nosegs++; return (ENOBUFS); } txd->tx_m = *m_head; bus_dmamap_sync(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap, BUS_DMASYNC_PREWRITE); /* * Make a list of descriptors for this packet. DMA controller will * walk through it while arge_link is not zero. * * Since we're in a endless circular buffer, ensure that * the first descriptor in a multi-descriptor ring is always * set to EMPTY, then un-do it when we're done populating. */ prev_prod = prod; desc = prev_desc = NULL; for (i = 0; i < nsegs; i++) { uint32_t tmp; desc = &sc->arge_rdata.arge_tx_ring[prod]; /* * Set DESC_EMPTY so the hardware (hopefully) stops at this * point. We don't want it to start transmitting descriptors * before we've finished fleshing this out. */ tmp = ARGE_DMASIZE(txsegs[i].ds_len); if (i == 0) tmp |= ARGE_DESC_EMPTY; desc->packet_ctrl = tmp; /* XXX Note: only relevant for older MACs; but check length! */ if ((sc->arge_hw_flags & ARGE_HW_FLG_TX_DESC_ALIGN_4BYTE) && (txsegs[i].ds_addr & 3)) panic("TX packet address unaligned\n"); desc->packet_addr = txsegs[i].ds_addr; /* link with previous descriptor */ if (prev_desc) prev_desc->packet_ctrl |= ARGE_DESC_MORE; sc->arge_cdata.arge_tx_cnt++; prev_desc = desc; ARGE_INC(prod, ARGE_TX_RING_COUNT); } /* Update producer index. */ sc->arge_cdata.arge_tx_prod = prod; /* * The descriptors are updated, so enable the first one. */ desc = &sc->arge_rdata.arge_tx_ring[prev_prod]; desc->packet_ctrl &= ~ ARGE_DESC_EMPTY; /* Sync descriptors. */ bus_dmamap_sync(sc->arge_cdata.arge_tx_ring_tag, sc->arge_cdata.arge_tx_ring_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); /* Flush writes */ ARGE_BARRIER_WRITE(sc); /* Start transmitting */ ARGEDEBUG(sc, ARGE_DBG_TX, "%s: setting DMA_TX_CONTROL_EN\n", __func__); ARGE_WRITE(sc, AR71XX_DMA_TX_CONTROL, DMA_TX_CONTROL_EN); return (0); } static void arge_start(struct ifnet *ifp) { struct arge_softc *sc; sc = ifp->if_softc; ARGE_LOCK(sc); arge_start_locked(ifp); ARGE_UNLOCK(sc); } static void arge_start_locked(struct ifnet *ifp) { struct arge_softc *sc; struct mbuf *m_head; int enq = 0; sc = ifp->if_softc; ARGE_LOCK_ASSERT(sc); ARGEDEBUG(sc, ARGE_DBG_TX, "%s: beginning\n", __func__); if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != IFF_DRV_RUNNING || sc->arge_link_status == 0 ) return; /* * Before we go any further, check whether we're already full. * The below check errors out immediately if the ring is full * and never gets a chance to set this flag. Although it's * likely never needed, this at least avoids an unexpected * situation. */ if (sc->arge_cdata.arge_tx_cnt >= ARGE_TX_RING_COUNT - 2) { ifp->if_drv_flags |= IFF_DRV_OACTIVE; ARGEDEBUG(sc, ARGE_DBG_ERR, "%s: tx_cnt %d >= max %d; setting IFF_DRV_OACTIVE\n", __func__, sc->arge_cdata.arge_tx_cnt, ARGE_TX_RING_COUNT - 2); return; } arge_flush_ddr(sc); for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) && sc->arge_cdata.arge_tx_cnt < ARGE_TX_RING_COUNT - 2; ) { IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; /* * Pack the data into the transmit ring. */ if (arge_encap(sc, &m_head)) { if (m_head == NULL) break; IFQ_DRV_PREPEND(&ifp->if_snd, m_head); ifp->if_drv_flags |= IFF_DRV_OACTIVE; break; } enq++; /* * If there's a BPF listener, bounce a copy of this frame * to him. */ ETHER_BPF_MTAP(ifp, m_head); } ARGEDEBUG(sc, ARGE_DBG_TX, "%s: finished; queued %d packets\n", __func__, enq); } static void arge_stop(struct arge_softc *sc) { struct ifnet *ifp; ARGE_LOCK_ASSERT(sc); ifp = sc->arge_ifp; ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); if (sc->arge_miibus) callout_stop(&sc->arge_stat_callout); /* mask out interrupts */ ARGE_WRITE(sc, AR71XX_DMA_INTR, 0); arge_reset_dma(sc); /* Flush FIFO and free any existing mbufs */ arge_flush_ddr(sc); arge_rx_ring_free(sc); arge_tx_ring_free(sc); } static int arge_ioctl(struct ifnet *ifp, u_long command, caddr_t data) { struct arge_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; struct mii_data *mii; int error; #ifdef DEVICE_POLLING int mask; #endif switch (command) { case SIOCSIFFLAGS: ARGE_LOCK(sc); if ((ifp->if_flags & IFF_UP) != 0) { if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { if (((ifp->if_flags ^ sc->arge_if_flags) & (IFF_PROMISC | IFF_ALLMULTI)) != 0) { /* XXX: handle promisc & multi flags */ } } else { if (!sc->arge_detach) arge_init_locked(sc); } } else if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { ifp->if_drv_flags &= ~IFF_DRV_RUNNING; arge_stop(sc); } sc->arge_if_flags = ifp->if_flags; ARGE_UNLOCK(sc); error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: /* XXX: implement SIOCDELMULTI */ error = 0; break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: if (sc->arge_miibus) { mii = device_get_softc(sc->arge_miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); } else error = ifmedia_ioctl(ifp, ifr, &sc->arge_ifmedia, command); break; case SIOCSIFCAP: /* XXX: Check other capabilities */ #ifdef DEVICE_POLLING mask = ifp->if_capenable ^ ifr->ifr_reqcap; if (mask & IFCAP_POLLING) { if (ifr->ifr_reqcap & IFCAP_POLLING) { ARGE_WRITE(sc, AR71XX_DMA_INTR, 0); error = ether_poll_register(arge_poll, ifp); if (error) return error; ARGE_LOCK(sc); ifp->if_capenable |= IFCAP_POLLING; ARGE_UNLOCK(sc); } else { ARGE_WRITE(sc, AR71XX_DMA_INTR, DMA_INTR_ALL); error = ether_poll_deregister(ifp); ARGE_LOCK(sc); ifp->if_capenable &= ~IFCAP_POLLING; ARGE_UNLOCK(sc); } } error = 0; break; #endif default: error = ether_ioctl(ifp, command, data); break; } return (error); } /* * Set media options. */ static int arge_ifmedia_upd(struct ifnet *ifp) { struct arge_softc *sc; struct mii_data *mii; struct mii_softc *miisc; int error; sc = ifp->if_softc; ARGE_LOCK(sc); mii = device_get_softc(sc->arge_miibus); LIST_FOREACH(miisc, &mii->mii_phys, mii_list) PHY_RESET(miisc); error = mii_mediachg(mii); ARGE_UNLOCK(sc); return (error); } /* * Report current media status. */ static void arge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct arge_softc *sc = ifp->if_softc; struct mii_data *mii; mii = device_get_softc(sc->arge_miibus); ARGE_LOCK(sc); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; ARGE_UNLOCK(sc); } struct arge_dmamap_arg { bus_addr_t arge_busaddr; }; static void arge_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) { struct arge_dmamap_arg *ctx; if (error != 0) return; ctx = arg; ctx->arge_busaddr = segs[0].ds_addr; } static int arge_dma_alloc(struct arge_softc *sc) { struct arge_dmamap_arg ctx; struct arge_txdesc *txd; struct arge_rxdesc *rxd; int error, i; int arge_tx_align, arge_rx_align; /* Assume 4 byte alignment by default */ arge_tx_align = 4; arge_rx_align = 4; if (sc->arge_hw_flags & ARGE_HW_FLG_TX_DESC_ALIGN_1BYTE) arge_tx_align = 1; if (sc->arge_hw_flags & ARGE_HW_FLG_RX_DESC_ALIGN_1BYTE) arge_rx_align = 1; /* Create parent DMA tag. */ error = bus_dma_tag_create( bus_get_dma_tag(sc->arge_dev), /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ BUS_SPACE_MAXSIZE_32BIT, /* maxsize */ 0, /* nsegments */ BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->arge_cdata.arge_parent_tag); if (error != 0) { device_printf(sc->arge_dev, "failed to create parent DMA tag\n"); goto fail; } /* Create tag for Tx ring. */ error = bus_dma_tag_create( sc->arge_cdata.arge_parent_tag, /* parent */ ARGE_RING_ALIGN, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ ARGE_TX_DMA_SIZE, /* maxsize */ 1, /* nsegments */ ARGE_TX_DMA_SIZE, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->arge_cdata.arge_tx_ring_tag); if (error != 0) { device_printf(sc->arge_dev, "failed to create Tx ring DMA tag\n"); goto fail; } /* Create tag for Rx ring. */ error = bus_dma_tag_create( sc->arge_cdata.arge_parent_tag, /* parent */ ARGE_RING_ALIGN, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ ARGE_RX_DMA_SIZE, /* maxsize */ 1, /* nsegments */ ARGE_RX_DMA_SIZE, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->arge_cdata.arge_rx_ring_tag); if (error != 0) { device_printf(sc->arge_dev, "failed to create Rx ring DMA tag\n"); goto fail; } /* Create tag for Tx buffers. */ error = bus_dma_tag_create( sc->arge_cdata.arge_parent_tag, /* parent */ arge_tx_align, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MCLBYTES * ARGE_MAXFRAGS, /* maxsize */ ARGE_MAXFRAGS, /* nsegments */ MCLBYTES, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->arge_cdata.arge_tx_tag); if (error != 0) { device_printf(sc->arge_dev, "failed to create Tx DMA tag\n"); goto fail; } /* Create tag for Rx buffers. */ error = bus_dma_tag_create( sc->arge_cdata.arge_parent_tag, /* parent */ arge_rx_align, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MCLBYTES, /* maxsize */ ARGE_MAXFRAGS, /* nsegments */ MCLBYTES, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->arge_cdata.arge_rx_tag); if (error != 0) { device_printf(sc->arge_dev, "failed to create Rx DMA tag\n"); goto fail; } /* Allocate DMA'able memory and load the DMA map for Tx ring. */ error = bus_dmamem_alloc(sc->arge_cdata.arge_tx_ring_tag, (void **)&sc->arge_rdata.arge_tx_ring, BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->arge_cdata.arge_tx_ring_map); if (error != 0) { device_printf(sc->arge_dev, "failed to allocate DMA'able memory for Tx ring\n"); goto fail; } ctx.arge_busaddr = 0; error = bus_dmamap_load(sc->arge_cdata.arge_tx_ring_tag, sc->arge_cdata.arge_tx_ring_map, sc->arge_rdata.arge_tx_ring, ARGE_TX_DMA_SIZE, arge_dmamap_cb, &ctx, 0); if (error != 0 || ctx.arge_busaddr == 0) { device_printf(sc->arge_dev, "failed to load DMA'able memory for Tx ring\n"); goto fail; } sc->arge_rdata.arge_tx_ring_paddr = ctx.arge_busaddr; /* Allocate DMA'able memory and load the DMA map for Rx ring. */ error = bus_dmamem_alloc(sc->arge_cdata.arge_rx_ring_tag, (void **)&sc->arge_rdata.arge_rx_ring, BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->arge_cdata.arge_rx_ring_map); if (error != 0) { device_printf(sc->arge_dev, "failed to allocate DMA'able memory for Rx ring\n"); goto fail; } ctx.arge_busaddr = 0; error = bus_dmamap_load(sc->arge_cdata.arge_rx_ring_tag, sc->arge_cdata.arge_rx_ring_map, sc->arge_rdata.arge_rx_ring, ARGE_RX_DMA_SIZE, arge_dmamap_cb, &ctx, 0); if (error != 0 || ctx.arge_busaddr == 0) { device_printf(sc->arge_dev, "failed to load DMA'able memory for Rx ring\n"); goto fail; } sc->arge_rdata.arge_rx_ring_paddr = ctx.arge_busaddr; /* Create DMA maps for Tx buffers. */ for (i = 0; i < ARGE_TX_RING_COUNT; i++) { txd = &sc->arge_cdata.arge_txdesc[i]; txd->tx_m = NULL; txd->tx_dmamap = NULL; error = bus_dmamap_create(sc->arge_cdata.arge_tx_tag, 0, &txd->tx_dmamap); if (error != 0) { device_printf(sc->arge_dev, "failed to create Tx dmamap\n"); goto fail; } } /* Create DMA maps for Rx buffers. */ if ((error = bus_dmamap_create(sc->arge_cdata.arge_rx_tag, 0, &sc->arge_cdata.arge_rx_sparemap)) != 0) { device_printf(sc->arge_dev, "failed to create spare Rx dmamap\n"); goto fail; } for (i = 0; i < ARGE_RX_RING_COUNT; i++) { rxd = &sc->arge_cdata.arge_rxdesc[i]; rxd->rx_m = NULL; rxd->rx_dmamap = NULL; error = bus_dmamap_create(sc->arge_cdata.arge_rx_tag, 0, &rxd->rx_dmamap); if (error != 0) { device_printf(sc->arge_dev, "failed to create Rx dmamap\n"); goto fail; } } fail: return (error); } static void arge_dma_free(struct arge_softc *sc) { struct arge_txdesc *txd; struct arge_rxdesc *rxd; int i; /* Tx ring. */ if (sc->arge_cdata.arge_tx_ring_tag) { if (sc->arge_rdata.arge_tx_ring_paddr) bus_dmamap_unload(sc->arge_cdata.arge_tx_ring_tag, sc->arge_cdata.arge_tx_ring_map); if (sc->arge_rdata.arge_tx_ring) bus_dmamem_free(sc->arge_cdata.arge_tx_ring_tag, sc->arge_rdata.arge_tx_ring, sc->arge_cdata.arge_tx_ring_map); sc->arge_rdata.arge_tx_ring = NULL; sc->arge_rdata.arge_tx_ring_paddr = 0; bus_dma_tag_destroy(sc->arge_cdata.arge_tx_ring_tag); sc->arge_cdata.arge_tx_ring_tag = NULL; } /* Rx ring. */ if (sc->arge_cdata.arge_rx_ring_tag) { if (sc->arge_rdata.arge_rx_ring_paddr) bus_dmamap_unload(sc->arge_cdata.arge_rx_ring_tag, sc->arge_cdata.arge_rx_ring_map); if (sc->arge_rdata.arge_rx_ring) bus_dmamem_free(sc->arge_cdata.arge_rx_ring_tag, sc->arge_rdata.arge_rx_ring, sc->arge_cdata.arge_rx_ring_map); sc->arge_rdata.arge_rx_ring = NULL; sc->arge_rdata.arge_rx_ring_paddr = 0; bus_dma_tag_destroy(sc->arge_cdata.arge_rx_ring_tag); sc->arge_cdata.arge_rx_ring_tag = NULL; } /* Tx buffers. */ if (sc->arge_cdata.arge_tx_tag) { for (i = 0; i < ARGE_TX_RING_COUNT; i++) { txd = &sc->arge_cdata.arge_txdesc[i]; if (txd->tx_dmamap) { bus_dmamap_destroy(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap); txd->tx_dmamap = NULL; } } bus_dma_tag_destroy(sc->arge_cdata.arge_tx_tag); sc->arge_cdata.arge_tx_tag = NULL; } /* Rx buffers. */ if (sc->arge_cdata.arge_rx_tag) { for (i = 0; i < ARGE_RX_RING_COUNT; i++) { rxd = &sc->arge_cdata.arge_rxdesc[i]; if (rxd->rx_dmamap) { bus_dmamap_destroy(sc->arge_cdata.arge_rx_tag, rxd->rx_dmamap); rxd->rx_dmamap = NULL; } } if (sc->arge_cdata.arge_rx_sparemap) { bus_dmamap_destroy(sc->arge_cdata.arge_rx_tag, sc->arge_cdata.arge_rx_sparemap); sc->arge_cdata.arge_rx_sparemap = 0; } bus_dma_tag_destroy(sc->arge_cdata.arge_rx_tag); sc->arge_cdata.arge_rx_tag = NULL; } if (sc->arge_cdata.arge_parent_tag) { bus_dma_tag_destroy(sc->arge_cdata.arge_parent_tag); sc->arge_cdata.arge_parent_tag = NULL; } } /* * Initialize the transmit descriptors. */ static int arge_tx_ring_init(struct arge_softc *sc) { struct arge_ring_data *rd; struct arge_txdesc *txd; bus_addr_t addr; int i; sc->arge_cdata.arge_tx_prod = 0; sc->arge_cdata.arge_tx_cons = 0; sc->arge_cdata.arge_tx_cnt = 0; rd = &sc->arge_rdata; bzero(rd->arge_tx_ring, sizeof(rd->arge_tx_ring)); for (i = 0; i < ARGE_TX_RING_COUNT; i++) { if (i == ARGE_TX_RING_COUNT - 1) addr = ARGE_TX_RING_ADDR(sc, 0); else addr = ARGE_TX_RING_ADDR(sc, i + 1); rd->arge_tx_ring[i].packet_ctrl = ARGE_DESC_EMPTY; rd->arge_tx_ring[i].next_desc = addr; txd = &sc->arge_cdata.arge_txdesc[i]; txd->tx_m = NULL; } bus_dmamap_sync(sc->arge_cdata.arge_tx_ring_tag, sc->arge_cdata.arge_tx_ring_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return (0); } /* * Free the Tx ring, unload any pending dma transaction and free the mbuf. */ static void arge_tx_ring_free(struct arge_softc *sc) { struct arge_txdesc *txd; int i; /* Free the Tx buffers. */ for (i = 0; i < ARGE_TX_RING_COUNT; i++) { txd = &sc->arge_cdata.arge_txdesc[i]; if (txd->tx_dmamap) { bus_dmamap_sync(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap); } if (txd->tx_m) m_freem(txd->tx_m); txd->tx_m = NULL; } } /* * Initialize the RX descriptors and allocate mbufs for them. Note that * we arrange the descriptors in a closed ring, so that the last descriptor * points back to the first. */ static int arge_rx_ring_init(struct arge_softc *sc) { struct arge_ring_data *rd; struct arge_rxdesc *rxd; bus_addr_t addr; int i; sc->arge_cdata.arge_rx_cons = 0; rd = &sc->arge_rdata; bzero(rd->arge_rx_ring, sizeof(rd->arge_rx_ring)); for (i = 0; i < ARGE_RX_RING_COUNT; i++) { rxd = &sc->arge_cdata.arge_rxdesc[i]; if (rxd->rx_m != NULL) { device_printf(sc->arge_dev, "%s: ring[%d] rx_m wasn't free?\n", __func__, i); } rxd->rx_m = NULL; rxd->desc = &rd->arge_rx_ring[i]; if (i == ARGE_RX_RING_COUNT - 1) addr = ARGE_RX_RING_ADDR(sc, 0); else addr = ARGE_RX_RING_ADDR(sc, i + 1); rd->arge_rx_ring[i].next_desc = addr; if (arge_newbuf(sc, i) != 0) { return (ENOBUFS); } } bus_dmamap_sync(sc->arge_cdata.arge_rx_ring_tag, sc->arge_cdata.arge_rx_ring_map, BUS_DMASYNC_PREWRITE); return (0); } /* * Free all the buffers in the RX ring. * * TODO: ensure that DMA is disabled and no pending DMA * is lurking in the FIFO. */ static void arge_rx_ring_free(struct arge_softc *sc) { int i; struct arge_rxdesc *rxd; ARGE_LOCK_ASSERT(sc); for (i = 0; i < ARGE_RX_RING_COUNT; i++) { rxd = &sc->arge_cdata.arge_rxdesc[i]; /* Unmap the mbuf */ if (rxd->rx_m != NULL) { bus_dmamap_unload(sc->arge_cdata.arge_rx_tag, rxd->rx_dmamap); m_free(rxd->rx_m); rxd->rx_m = NULL; } } } /* * Initialize an RX descriptor and attach an MBUF cluster. */ static int arge_newbuf(struct arge_softc *sc, int idx) { struct arge_desc *desc; struct arge_rxdesc *rxd; struct mbuf *m; bus_dma_segment_t segs[1]; bus_dmamap_t map; int nsegs; /* XXX TODO: should just allocate an explicit 2KiB buffer */ m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (m == NULL) return (ENOBUFS); m->m_len = m->m_pkthdr.len = MCLBYTES; /* * Add extra space to "adjust" (copy) the packet back to be aligned * for purposes of IPv4/IPv6 header contents. */ if (sc->arge_hw_flags & ARGE_HW_FLG_RX_DESC_ALIGN_4BYTE) m_adj(m, sizeof(uint64_t)); /* * If it's a 1-byte aligned buffer, then just offset it two bytes * and that will give us a hopefully correctly DWORD aligned * L3 payload - and we won't have to undo it afterwards. */ else if (sc->arge_hw_flags & ARGE_HW_FLG_RX_DESC_ALIGN_1BYTE) m_adj(m, sizeof(uint16_t)); if (bus_dmamap_load_mbuf_sg(sc->arge_cdata.arge_rx_tag, sc->arge_cdata.arge_rx_sparemap, m, segs, &nsegs, 0) != 0) { m_freem(m); return (ENOBUFS); } KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs)); rxd = &sc->arge_cdata.arge_rxdesc[idx]; if (rxd->rx_m != NULL) { bus_dmamap_unload(sc->arge_cdata.arge_rx_tag, rxd->rx_dmamap); } map = rxd->rx_dmamap; rxd->rx_dmamap = sc->arge_cdata.arge_rx_sparemap; sc->arge_cdata.arge_rx_sparemap = map; rxd->rx_m = m; desc = rxd->desc; if ((sc->arge_hw_flags & ARGE_HW_FLG_RX_DESC_ALIGN_4BYTE) && segs[0].ds_addr & 3) panic("RX packet address unaligned"); desc->packet_addr = segs[0].ds_addr; desc->packet_ctrl = ARGE_DESC_EMPTY | ARGE_DMASIZE(segs[0].ds_len); bus_dmamap_sync(sc->arge_cdata.arge_rx_ring_tag, sc->arge_cdata.arge_rx_ring_map, BUS_DMASYNC_PREWRITE); return (0); } /* * Move the data backwards 16 bits to (hopefully!) ensure the * IPv4/IPv6 payload is aligned. * * This is required for earlier hardware where the RX path * requires DWORD aligned buffers. */ static __inline void arge_fixup_rx(struct mbuf *m) { int i; uint16_t *src, *dst; src = mtod(m, uint16_t *); dst = src - 1; for (i = 0; i < m->m_len / sizeof(uint16_t); i++) { *dst++ = *src++; } if (m->m_len % sizeof(uint16_t)) *(uint8_t *)dst = *(uint8_t *)src; m->m_data -= ETHER_ALIGN; } #ifdef DEVICE_POLLING static int arge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) { struct arge_softc *sc = ifp->if_softc; int rx_npkts = 0; if (ifp->if_drv_flags & IFF_DRV_RUNNING) { ARGE_LOCK(sc); arge_tx_locked(sc); rx_npkts = arge_rx_locked(sc); ARGE_UNLOCK(sc); } return (rx_npkts); } #endif /* DEVICE_POLLING */ static void arge_tx_locked(struct arge_softc *sc) { struct arge_txdesc *txd; struct arge_desc *cur_tx; struct ifnet *ifp; uint32_t ctrl; int cons, prod; ARGE_LOCK_ASSERT(sc); cons = sc->arge_cdata.arge_tx_cons; prod = sc->arge_cdata.arge_tx_prod; ARGEDEBUG(sc, ARGE_DBG_TX, "%s: cons=%d, prod=%d\n", __func__, cons, prod); if (cons == prod) return; bus_dmamap_sync(sc->arge_cdata.arge_tx_ring_tag, sc->arge_cdata.arge_tx_ring_map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); ifp = sc->arge_ifp; /* * Go through our tx list and free mbufs for those * frames that have been transmitted. */ for (; cons != prod; ARGE_INC(cons, ARGE_TX_RING_COUNT)) { cur_tx = &sc->arge_rdata.arge_tx_ring[cons]; ctrl = cur_tx->packet_ctrl; /* Check if descriptor has "finished" flag */ if ((ctrl & ARGE_DESC_EMPTY) == 0) break; ARGE_WRITE(sc, AR71XX_DMA_TX_STATUS, DMA_TX_STATUS_PKT_SENT); sc->arge_cdata.arge_tx_cnt--; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; txd = &sc->arge_cdata.arge_txdesc[cons]; if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); bus_dmamap_sync(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->arge_cdata.arge_tx_tag, txd->tx_dmamap); /* Free only if it's first descriptor in list */ if (txd->tx_m) m_freem(txd->tx_m); txd->tx_m = NULL; /* reset descriptor */ cur_tx->packet_addr = 0; } sc->arge_cdata.arge_tx_cons = cons; bus_dmamap_sync(sc->arge_cdata.arge_tx_ring_tag, sc->arge_cdata.arge_tx_ring_map, BUS_DMASYNC_PREWRITE); } static int arge_rx_locked(struct arge_softc *sc) { struct arge_rxdesc *rxd; struct ifnet *ifp = sc->arge_ifp; int cons, prog, packet_len, i; struct arge_desc *cur_rx; struct mbuf *m; int rx_npkts = 0; ARGE_LOCK_ASSERT(sc); cons = sc->arge_cdata.arge_rx_cons; bus_dmamap_sync(sc->arge_cdata.arge_rx_ring_tag, sc->arge_cdata.arge_rx_ring_map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); for (prog = 0; prog < ARGE_RX_RING_COUNT; ARGE_INC(cons, ARGE_RX_RING_COUNT)) { cur_rx = &sc->arge_rdata.arge_rx_ring[cons]; rxd = &sc->arge_cdata.arge_rxdesc[cons]; m = rxd->rx_m; if ((cur_rx->packet_ctrl & ARGE_DESC_EMPTY) != 0) break; ARGE_WRITE(sc, AR71XX_DMA_RX_STATUS, DMA_RX_STATUS_PKT_RECVD); prog++; packet_len = ARGE_DMASIZE(cur_rx->packet_ctrl); bus_dmamap_sync(sc->arge_cdata.arge_rx_tag, rxd->rx_dmamap, BUS_DMASYNC_POSTREAD); m = rxd->rx_m; /* * If the MAC requires 4 byte alignment then the RX setup * routine will have pre-offset things; so un-offset it here. */ if (sc->arge_hw_flags & ARGE_HW_FLG_RX_DESC_ALIGN_4BYTE) arge_fixup_rx(m); m->m_pkthdr.rcvif = ifp; /* Skip 4 bytes of CRC */ m->m_pkthdr.len = m->m_len = packet_len - ETHER_CRC_LEN; if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1); rx_npkts++; ARGE_UNLOCK(sc); (*ifp->if_input)(ifp, m); ARGE_LOCK(sc); cur_rx->packet_addr = 0; } if (prog > 0) { i = sc->arge_cdata.arge_rx_cons; for (; prog > 0 ; prog--) { if (arge_newbuf(sc, i) != 0) { device_printf(sc->arge_dev, "Failed to allocate buffer\n"); break; } ARGE_INC(i, ARGE_RX_RING_COUNT); } bus_dmamap_sync(sc->arge_cdata.arge_rx_ring_tag, sc->arge_cdata.arge_rx_ring_map, BUS_DMASYNC_PREWRITE); sc->arge_cdata.arge_rx_cons = cons; } return (rx_npkts); } static int arge_intr_filter(void *arg) { struct arge_softc *sc = arg; uint32_t status, ints; status = ARGE_READ(sc, AR71XX_DMA_INTR_STATUS); ints = ARGE_READ(sc, AR71XX_DMA_INTR); ARGEDEBUG(sc, ARGE_DBG_INTR, "int mask(filter) = %b\n", ints, "\20\10RX_BUS_ERROR\7RX_OVERFLOW\5RX_PKT_RCVD" "\4TX_BUS_ERROR\2TX_UNDERRUN\1TX_PKT_SENT"); ARGEDEBUG(sc, ARGE_DBG_INTR, "status(filter) = %b\n", status, "\20\10RX_BUS_ERROR\7RX_OVERFLOW\5RX_PKT_RCVD" "\4TX_BUS_ERROR\2TX_UNDERRUN\1TX_PKT_SENT"); if (status & DMA_INTR_ALL) { sc->arge_intr_status |= status; ARGE_WRITE(sc, AR71XX_DMA_INTR, 0); sc->stats.intr_ok++; return (FILTER_SCHEDULE_THREAD); } sc->arge_intr_status = 0; sc->stats.intr_stray++; return (FILTER_STRAY); } static void arge_intr(void *arg) { struct arge_softc *sc = arg; uint32_t status; struct ifnet *ifp = sc->arge_ifp; #ifdef ARGE_DEBUG int i; #endif status = ARGE_READ(sc, AR71XX_DMA_INTR_STATUS); status |= sc->arge_intr_status; ARGEDEBUG(sc, ARGE_DBG_INTR, "int status(intr) = %b\n", status, "\20\10\7RX_OVERFLOW\5RX_PKT_RCVD" "\4TX_BUS_ERROR\2TX_UNDERRUN\1TX_PKT_SENT"); /* * Is it our interrupt at all? */ if (status == 0) { sc->stats.intr_stray2++; return; } #ifdef ARGE_DEBUG for (i = 0; i < 32; i++) { if (status & (1U << i)) { sc->intr_stats.count[i]++; } } #endif if (status & DMA_INTR_RX_BUS_ERROR) { ARGE_WRITE(sc, AR71XX_DMA_RX_STATUS, DMA_RX_STATUS_BUS_ERROR); device_printf(sc->arge_dev, "RX bus error"); return; } if (status & DMA_INTR_TX_BUS_ERROR) { ARGE_WRITE(sc, AR71XX_DMA_TX_STATUS, DMA_TX_STATUS_BUS_ERROR); device_printf(sc->arge_dev, "TX bus error"); return; } ARGE_LOCK(sc); arge_flush_ddr(sc); if (status & DMA_INTR_RX_PKT_RCVD) arge_rx_locked(sc); /* * RX overrun disables the receiver. * Clear indication and re-enable rx. */ if ( status & DMA_INTR_RX_OVERFLOW) { ARGE_WRITE(sc, AR71XX_DMA_RX_STATUS, DMA_RX_STATUS_OVERFLOW); ARGE_WRITE(sc, AR71XX_DMA_RX_CONTROL, DMA_RX_CONTROL_EN); sc->stats.rx_overflow++; } if (status & DMA_INTR_TX_PKT_SENT) arge_tx_locked(sc); /* * Underrun turns off TX. Clear underrun indication. * If there's anything left in the ring, reactivate the tx. */ if (status & DMA_INTR_TX_UNDERRUN) { ARGE_WRITE(sc, AR71XX_DMA_TX_STATUS, DMA_TX_STATUS_UNDERRUN); sc->stats.tx_underflow++; ARGEDEBUG(sc, ARGE_DBG_TX, "%s: TX underrun; tx_cnt=%d\n", __func__, sc->arge_cdata.arge_tx_cnt); if (sc->arge_cdata.arge_tx_cnt > 0 ) { ARGE_WRITE(sc, AR71XX_DMA_TX_CONTROL, DMA_TX_CONTROL_EN); } } /* * If we've finished TXing and there's space for more packets * to be queued for TX, do so. Otherwise we may end up in a * situation where the interface send queue was filled * whilst the hardware queue was full, then the hardware * queue was drained by the interface send queue wasn't, * and thus if_start() is never called to kick-start * the send process (and all subsequent packets are simply * discarded. * * XXX TODO: make sure that the hardware deals nicely * with the possibility of the queue being enabled above * after a TX underrun, then having the hardware queue added * to below. */ if (status & (DMA_INTR_TX_PKT_SENT | DMA_INTR_TX_UNDERRUN) && (ifp->if_drv_flags & IFF_DRV_OACTIVE) == 0) { if (!IFQ_IS_EMPTY(&ifp->if_snd)) arge_start_locked(ifp); } /* * We handled all bits, clear status */ sc->arge_intr_status = 0; ARGE_UNLOCK(sc); /* * re-enable all interrupts */ ARGE_WRITE(sc, AR71XX_DMA_INTR, DMA_INTR_ALL); } static void arge_tick(void *xsc) { struct arge_softc *sc = xsc; struct mii_data *mii; ARGE_LOCK_ASSERT(sc); if (sc->arge_miibus) { mii = device_get_softc(sc->arge_miibus); mii_tick(mii); callout_reset(&sc->arge_stat_callout, hz, arge_tick, sc); } } int arge_multiphy_mediachange(struct ifnet *ifp) { struct arge_softc *sc = ifp->if_softc; struct ifmedia *ifm = &sc->arge_ifmedia; struct ifmedia_entry *ife = ifm->ifm_cur; if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) return (EINVAL); if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) { device_printf(sc->arge_dev, "AUTO is not supported for multiphy MAC"); return (EINVAL); } /* * Ignore everything */ return (0); } void arge_multiphy_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) { struct arge_softc *sc = ifp->if_softc; ifmr->ifm_status = IFM_AVALID | IFM_ACTIVE; ifmr->ifm_active = IFM_ETHER | sc->arge_media_type | sc->arge_duplex_mode; } #if defined(ARGE_MDIO) static int argemdio_probe(device_t dev) { device_set_desc(dev, "Atheros AR71xx built-in ethernet interface, MDIO controller"); return (0); } static int argemdio_attach(device_t dev) { struct arge_softc *sc; int error = 0; sc = device_get_softc(dev); sc->arge_dev = dev; sc->arge_mac_unit = device_get_unit(dev); sc->arge_rid = 0; sc->arge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->arge_rid, RF_ACTIVE | RF_SHAREABLE); if (sc->arge_res == NULL) { device_printf(dev, "couldn't map memory\n"); error = ENXIO; goto fail; } /* Reset MAC - required for AR71xx MDIO to successfully occur */ arge_reset_mac(sc); /* Reset MII bus */ arge_reset_miibus(sc); bus_generic_probe(dev); bus_enumerate_hinted_children(dev); error = bus_generic_attach(dev); fail: return (error); } static int argemdio_detach(device_t dev) { return (0); } #endif