# Default PCCARD configuration file # # Removing all IRQ conflicts from this file can't be done because of some # IRQ-selfish PC-cards. So if you want to use some of these cards in # your machine, you will be forced to modify their IRQ parameters from # the following list. # # IRQ == 0 means "allocate free IRQ from IRQ pool" # IRQ == 16 means "do not use IRQ (e.g. PIO mode)" # # $FreeBSD$ # # Send new entries for this file to imp@freebsd.org. He's volunteered # to act as coordinator for this file. # # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 3 5 10 11 15 # Available memory slots memory 0xd4000 96k # Include user configration file # This allow you to override or add configurations. include /etc/pccard.conf # # PLEASE KEEP THIS FILE IN ORDER # # In order is defined as follows. We sort first by driver type (an, ed, etc) # and then by CIS strings. Do not commit to this file entries out of # order. # ########## aic ########## # Adaptec SlimSCSI (also included with Sony CD-ROM players) card "Adaptec, Inc." "/APA-1460 .*/" config 0x9 "aic" ? insert camcontrol rescan $device # NewMedia Bustoaster SCSI card "New Media" "SCSI" config 0x22 "aic" ? insert camcontrol rescan $device ########## an ########## # Aironet PC4500 2Mbps 802.11 wireless NIC card "Aironet" "PC4500" config 0x5 "an" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Aironet PC4800 11Mbps 802.11 wireless NIC card "Aironet" "PC4800" config 0x5 "an" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Aironet 340/342 Series 11Mbps 802.11 wireless NIC card "Cisco Systems" "340 Series Wireless LAN Adapter" config auto "an" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop ########## ata ########## # Sony VAIO cdrom, Ninja-ATA CD-ROM Drive, MELCO CDN-D12EX card " " "NinjaATA-" config auto "ata" ? logstr "NinjaATA" # Non-brand Compact Flash Card(32MB) card " " "KCF 32M" config 0x1 "ata" ? iosize 16 logstr "Compact Flash Card 32M" # Caravelle PSC-IDE 6x ATAPI CD-ROM card "Caravelle" "PSC-IDE " config 0x2a "ata" ? # 0x1 (flags for wd, not sure for ata) # MCD-601p 6x CD-ROM drive. card "CDROM" "IDE" config auto "ata" ? logstr "MCD-601p" # Lexar Media compact flash card "CL ATA FLASH CARD LEXAR " "TIDALWV" # auto does not work config 0x1 "ata" ? # DATAFAB PCMMD2 card "DATAFAB" "PCMCIA-TO-IDE" config 0x1 "ata" ? # DHU Mobile Media CD-ROM # (no hotplug support) card "Digital Equipment Corporation." "Digital Mobile Media CD-ROM" config 0xb "ata" 15 # EXP DVD-780 DVD-ROM drive card "EXP " "PnPIDE" config auto "ata" ? # Toshiba mobile CD-ROM (Bundled with Portege 3110CT) card "FREECOM" "PCCARD-IDE" config auto "ata" ? iosize 16 # FUJITSU FlashDiskCard ZEBO-ATA40 card "FUJITSU" "ZEBO-ATA" config 0x03 "ata" ? # Greystone Diskdock card "GREYSTONE PERIPHERAL DISKDOCK" "/.*/" config default "ata" ? # HAGIWARA FLASH card "HAGIWARA" "FLASH" config default "ata" ? # Hitachi Flash ATA card "HITACHI" "/.*FLASH.*/" config 0x01 "ata" ? iosize 16 # IBM Flash ATA (Ricoh Flash ATA 10MB) card "IBM" "IBM17JSSFP10" config auto "ata" ? iosize 16 # XXX NOT SURE SUPPORTED # IBM Portable 4X Speed CD-ROM Drive CD-400 #card "IBM" "PCMCIA CD-ROM Drive CD-400" # config 0x1 "ata" ? iosize 0x20 # 0x10000 (flags for wd, not sure for ata) # IBM CD-20XSeries(IDE PC Card) card "IBM" "PCMCIA Portable CD-ROM Drive" config auto "ata" ? iosize 0x1 # IBM Microdrive (CF+ Type II) card "IBM" "microdrive" # config 0x03 "ata" ? config 0x01 "ata" ? iosize 16 # Integral Peripherals Viper HDD Series card "INTEGRAL PERIPHERALS" "ATA CARD" # config default "ata" ? config 0x01 "ata" ? iosize 16 # IO DATA PCMF144/20 (as Flash ATA only) card "IO DATA" "ATA&MODEM" config 0x7 "ata" ? # IO DATA CBIDE2 in 16 bit mode # (bundled with IO DATA CDP-AX24T, Panasonic DVD-ROM LK-RV8171D) card "IO DATA" "CBIDE2" config default "ata" ? # IO Data PCIDE-II (bundled with CDP-TX6, etc.) card "IO DATA" "PCIDEII" config auto "ata" ? # Iomega Zip Drive card "Iomega" "PCMCIA to 16 bit ATAPI Adapter" config 0x2 "ata" ? # KODAK Picture Card card "KODAK Picture Card" "KODAK" config default "ata" ? # TOSHIBA Portable 24X Speed CD-ROM Drive PA2673UJ card "LOOKMEET" "CBIDE2" config default "ata" ? # Maxtor ATA HDD card "Maxtor" "/MXL.*/" config 0x03 "ata" ? # Microtech XpressDock card "Microtech International Inc." "IDE PCCARD" config auto "ata" ? 0x20000 iosize 16 # Midori Elec. Flash ATA card "Midori Elec." "/.*FLASH.*/" config 0x03 "ata" ? # LK-RM120 card "Panasonic" "LMEK0406" config 0x22 "ata" ? 0x1 # Another boring, generic ata atapter card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter" config auto "ata" ? # pc-card from PSCD-740 cdrom card "PCMCIA" "CD-ROM" config 0x1 "ata" ? # Shining PMIDE-ASC CDROM / Road Warrior Bullet Disk card "Shining" "PMIDE-ASC" config auto "ata" ? 0x20000 # Microtech PortableDRIVE25/PCMCIA card "SHUTTLE TECHNOLOGY LTD." "PCCARD-IDE/ATAPI Adapter" config auto "ata" ? 0x20000 # XXX NOT SURE SUPPORTED # CitiDISK & Addonics PocketZIP #card "Shining" "PMIDE-ASC" # config default "ata" ? # 0x20000 (flags for wd, not sure for ata) # Sicon Peripheral PCMCIA ATA/ATAPI Adapter card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter" config default "ata" ? # SiliconTech,Inc. Compact PC Card card "SiliconTech,Inc." "/[0-9]*MB Compact PC Card/" config 0x1 "ata" ? # Simple Technology ata flash card "Simple Technology " "STI-ATA" config 0x2 "ata" ? # SONY Memory Stick PC Card Adaptor card "SONY" "/MEMORYSTICK.*/" config 0x01 "ata" ? iosize 16 # SunDisk Flash ATA # (OEM: Epson Flash Packer) card "SunDisk" "/.*/" config 0x1 "ata" ? # TDK Flash ATA card "TDK TC_H." "/.*/" config 0x1 "ata" ? # IO Data CBIDE (bundled with CDP-FX24, etc.) card "WIT" "IDE16" config auto "ata" ? # LIP-32B attached to Logitec LCW-PD648PI card "WORKBIT" "ATA-32Bi(16)" config default "ata" ? # Viking ATA Flash card card "VIKING ATA/CF FLASH CARD " "TOR/AM " config 0x2 "ata" ? ########## awi ########## # Generic AMD Am79c930 based card card "AMD" "Am79C930" config 0x1 "awi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop card "Bay Networks" "BayStack 650 Wireless LAN" config 0x1 "awi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop card "Farallon" "SkyLINE Wireless" config default "awi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop card "Icom" "SL-200" config 0x1 "awi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop ########## cnw ########## # XXX NOT SUPPORTED YET # NetWave AirSurfer # NOTE: For some machines, wait cycle for memory access is required. # you should change "0x40" on the last part of "cardmem" line to "0x44", # like: # cardmem 0xd4000 0x20000 0x9000 0x44 # IBM ThinkPads are known to require this change. #card "Xircom" "CreditCard Netwave" # config 0x01 "cnw" ? # cardmem 0xd4000 0x20000 0x9000 0x40 # config 0x01 "cnw" ? ## cardmem 0xdd000 0x20000 0x9000 0x40 # ether 0x126 00:80:c7 00:20:d8 # insert /etc/pccard_ether $device # remove /sbin/ifconfig $device delete ########## ed ########## # No-brand NE2000 compatible card (FCC ID: LXLC1LANTB) card " " "Ethernet Combo card" config auto "ed" ? 0x10 logstr "NE2000 compatible card" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Map Japan MPL-972 card "2408LAN" "Ethernet" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Accton EN2212 # Very slow! (PIO mode) card "ACCTON" "EN2212" config 0x1 "ed" ? 0x10 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop #Accton 2216 card "ACCTON" "EN2216-PCMCIA-ETHERNET" config 0x20 "ed" ? # config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Allied Telesis CentreCOM LA100-PCM-T V2 card "Allied Telesis, K.K" "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Allied Telesis Ethernet Card card "Allied Telesis,K.K" "Ethernet LAN Card" config 0x1 "ed" ? 0x10 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Allied Telesis CentreCOM LA-PCM_V2 ethernet card # NTT-DATA ASTROWINK-M/MMOIL(IrLAN) ethernet card card "Allied Telesis, K.K." "CentreCOM LA-PCM_V2" config 0x20 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Allied Telesis CentreCOM LA100-PCM-T V2 card "Allied Telesis, K.K." "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Allied Telesis CentreCOM LA-PCM V3 card "Allied Telesis K.K." "LA-PCM V3" config auto "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # AmbiCom 10BaseT card card "AmbiCom Inc" "AMB8002T" config 0x20 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Billionton LNT-10TB card "Billionton" "LNT-10TB" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # CNet BC40 adapter card "CNet" "CN40BC Ethernet" config 0x20 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # COREGA FEther PCC-TXF card "corega" "FEther PCC-TXF" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # COREGA Ether PCC-T card "corega K.K." "corega Ether PCC-T" config 0x20 "ed" ? # config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # COREGA EtherII PCC-T card "corega K.K." "corega EtherII PCC-T" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # COREGA FastEther PCC-TX card "corega K.K." "corega FastEther PCC-TX" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Corega PCM-T card "Corega,K.K." "Ethernet LAN Card" config auto "ed" ? ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # CyQ've ELA-010 card "CyQ've" "ELA-010" config 0x20 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # CyQ've ELA-110 card "CyQ've" "ELA-110 10/100M LAN Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # CyQ've ELA-110E card "CyQ've" "ELA-110E 10/100M LAN Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # D-Link DE-650 NE2000 clone card "D-Link" "DE-650" config 0x20 "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # D-Link DE-660 NE2000 clone card "D-Link" "DE-660" config 0x20 "ed" ? 0x10 ether 0x81 insert /etc/pccard_ether $device start # insert /etc/pccard_ether $device start link0 -link1 remove /etc/pccard_ether $device stop # D-Link DFE-650 NE2000 clone card "D-Link" "DFE-650" config 0x20 "ed" ? 0x10 insert /etc/pccard_ether $device start # insert /etc/pccard_ether $device start link0 -link1 remove /etc/pccard_ether $device stop # D-Link DME-560T LAN/FAX/MODEM Card (as Ethernet) card "D-Link" "DME560T" config default "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Danpex (Alloy, etc.) EN-6200P2 card "DANPEX" "EN-6200P2" config 0x22 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Dayna Communications CommuniCard E card "Dayna Communications, Inc." "CommuniCard E" config auto "ed" ? 0x10 # ether 0x110 00:80:19 ether 0x110 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Digital DEPCM-BA Ethernet card "DIGITAL" "DEPCM-XX" config auto "ed" ? 0x10 # ether 0xff0 00:00:e8 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Planex FNW-3600-T card "Dual Speed" "10/100 PC Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Planex FNW-3600-TX 16bit FastEthernet DirectDock card "Dual Speed" "10/100 Port Attached PC Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # LinkSys ethernet card card "E-CARD" "E-CARD" config 0x20 "ed" ? logstr "LinkSys card" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Eiger Labs Ethernet COMBO card "EIGER Labs Inc." "Ethernet COMBO Card" config auto "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # XXX Compex Net-A adapter, Telecom SuperSocket RE450T and # Apollo PCMCIA Ethernet Adapter have same manufacturer and # card version string. They should be distinguished by # other info. (such as additional information or OEM-ID/product-ID). # Compex Net-A adapter card "Ethernet" "Adapter" config 0x1 "ed" ? ether 0xff0 logstr "Compex Net-A adapter" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Telecom Device SuperSocket RE450T # Note: There are several revisions of the cardon the market. # Type A needs no "ether" line. # Type B needs "ether 0x110" line. # Type C needs "ether 0xff0" line. # Yet more revisions exist, reportedly. # If you see strange MAC address shown by ifconfig command, # try other config. card "Ethernet" "Adapter" config 0x2 "ed" ? # ether 0x110 00:e0:98 # ether 0xff0 00:e0:98 logstr "Telecom SuperSocket RE450T" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Apollo PCMCIA Ethernet Adapter card "Ethernet" "Adapter" config 0x0 "ed" ? logstr "Apollo PCMCIA Ethernet Adapter" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # pci Ethernet Adapter Card card "Ethernet" "CF Size PC Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # pci Ethernet Adapter Card card "Ethernet" "CF Size PC Card" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # "Ethernet Adapter" "E2000 PCMCIA Ethernet" card "Ethernet Adapter" "E2000 PCMCIA Ethernet" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ADDTRON EP-210A card "EP-210 PCMCIA LAN CARD." "/.*/" config auto "ed" ? 0x10 # ether 0x110 00:40:33 ether 0x110 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # PLANEX (PLANET) FNW-3700-T card "Fast Ethernet" "16-bit PC Card" config auto "ed" ? 0x30000 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Planex FNW-3600-T 16bit FastEthernet card "Fast Ethernet" "Adapter" config 0x7 "ed" ? iosize 32 logstr "Planex FNW-3600-T" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # TDK Grey Cell GCS2000 Ethernet Card card "Grey Cell" "GCS2000" config auto "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Grey Cell GCS2220 Ethernet Card card "Grey Cell" "GCS2220" config auto "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # GVC NIC-2000P Ethernet Card card "GVC" "NIC-2000p" config auto "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # IBM PCMCIA Ethernet I/II card "IBM Corp." "Ethernet" config 0x1 "ed" ? ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop #AR-P500 ethernet card, PLANET PCMCIA ethernet Adapter card ENW-3500 card "IC-CARD" "IC-CARD" config auto "ed" ? logstr "AR-P500 Ethernet card" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # IC-CARD+ Ethernet card card "IC-CARD+" "IC-CARD+" config auto "ed" ? logstr "IC-CARD+ Ethernet card" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # I/O DATA PCLA/T card "I-O DATA" "PCLA" config auto "ed" ? 0x10 # ether 0x1c0 00:a0:b0 # ether 0xff0 00:a0:b0 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # I-O DATA PCLATE card "IO DATA" "PCLATE" config 0x20 "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # I-O DATA PCETTX card "IO DATA" "PCETTX" config 0x20 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # KANSAI ELECTRIC KLA-PCM/T card "KANSAI ELECTRIC CO.,LTD" "KLA-PCM/T" config 0x1 "ed" 15 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Kingston KNE-PC2 card "Kingston" "KNE-PC2" config default "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Kingston KNE-PCM/x Ethernet card "Kingston Technology Corp." "/EtheRx PC Card Ethernet.*/" config auto "ed" ? ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ELECOM Laneed LD-10/100CD card "Laneed" "LD-10/100CD" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Elecom Laneed LD-CDF card "Laneed" "LD-CDF" config 0x20 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ELECOM Laneed LD-CDS card "Laneed" "LD-CDS" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Linksys Combo PCMCIA EthernetCard (model EC2T on box) card "Linksys" "Combo PCMCIA EthernetCard (EC2T)" config 0x1 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Linksys Combo PCMCIA Ethernet Card card "LINKSYS" "E-CARD" config auto "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Linksys EtherFast 10/100 Intergrated PC Card (PCM100) card "Linksys" "EtherFast 10/100 Integrated PC Card (PCM100)" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop #Linksys EtherFast 10/100 PC Card (PCMPC100) card "Linksys" "EtherFast 10/100 PC Card (PCMPC100)" config 0x3 "ed" ? # config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Logitec LPM-LN100TX 100BASE-TX Ethernet LAN CARD card "Logitec" "LPM-LN100TX" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Logitec LPM-LN20T card "Logitec" "LPM-LN20T" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Socket LP-E (WinCE Low Power Ethernet) card "Low Power Ethernet LAN Adapter" "Socket Communications, Inc" config 0x20 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ELECOM Laneed LD-CDWA (DP83902A) card "MACNICA" "ME1-JEIDA" config auto "ed" ? # ether 0xb8 08:00:42 ether 0xb8 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Matsushita Electric Industrial Co.,LTD. CF-VEL211P-B card "Matsushita Electric Industrial Co.,LTD." "CF-VEL211" config auto "ed" ? # ether 0xff0 00:80:45 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # MELCO LPC2-T card "MELCO" "LPC2-T" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # MELCO LPC2-TX card "MELCO" "LPC2-TX" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Melco LPC-T (PIO mode) card "MELCO" "LPC3-TX" config 0x1 "ed" ? 0x30000 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # National Semiconductor InfoMover 4100 card "National Semiconductor" "InfoMover 4100" config auto "ed" ? # ether 0xff0 08:00:17 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # National Semiconductor InfoMover NE4100 card "National Semiconductor" "InfoMover NE4100" config 0x1 "ed" ? ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # NDC Ethernet Instant-Link NE2000 clone card "NDC" "Ethernet" config 0x22 "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # NEC PC-9801N-J12 card "NEC" "PC-9801N-J12" config auto "ed" ? # ether 0xff0 00:00:4c ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # BayNetworks NETGEAR FA410TXC Fast Ethernet card "NETGEAR" "FA410TX" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Network Everywhere Ethernet 10BaseT PC Card card "Network Everywhere" "Ethernet 10BaseT PC Card" config 0x1 "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Network Everywhere Ethernet Fast Ethernet 10/100 PC Card card "Network Everywhere" "Fast Ethernet 10/100 PC Card" config 0x5 "ed" 10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # New Media Corporation LiveWire 10/100 card "New Media Corporation" "LiveWire 10/100" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # NextCom Next Hawk Etherneet Adapter card "NextCom K.K." "Next Hawk" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Nihon Unisys, Ltd. JPF0400-ETH card "Nihon Unisys, Ltd." "JPF0400-ETH" config auto "ed" ? # ether 0xff0 00:80:45 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Nihon Unisys, Ltd. JPF0400-LAN card "Nihon Unisys, Ltd." "JPF0400-LAN" config auto "ed" ? # ether 0xff0 00:80:45 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # No-brand NE-2000 compatible card card "PCMCIA" "ETHERNET V1.0" config auto "ed" ? 0x10 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Telecom Device SuperSocket HPC100 card "PCMCIA" "FastEthernet" config auto "ed" ? 0x30000 logstr "Telecom Device SuperSocket HPC100" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Billionton 10Base-TX ETHERNET PCCARD (aka UE2216) # Also Genuius "Ethernet ME3000II SE" card "PCMCIA" "PCMCIA-ETHERNET-CARD" config 0x20 "ed" ? 0x10 logstr "UE2216" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Melco LPC-T (PIO mode) card "PCMCIA" "UE2212" config auto "ed" ? 0x10 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # EXPsys PCMCIA Ethernet Combo, Relia PCMCIA Ethernet card "PCMCIA LAN" "Ethernet" config auto "ed" ? logstr "EXPsys Ethernet" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # LinkMates LM 336 LAN Fax/Modem PC Card card "PCMCIAs" "ComboCard" config 0x24 "ed" ? 0x10 logstr "LinkMates LM 336" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Telecom Device SuperSocket LM336 (as Ethernet only) card "PCMCIAs" "LanModem" config default "ed" ? logstr "SuperSocket LM336" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # PreMax PE-200 Ethernet Card card "PMX " "PE-200" config auto "ed" ? 0x10 # ether 0x7f0 00:20:e0 ether 0x7f0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Psion Dacom Gold Card V34 Ethernet GSM # as ethernet card "Psion Dacom" "Gold Card V34 Ethernet GSM" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # RIOS PC CARD3 ETHERNET card "RIOS Systems Co." "PC CARD3 ETHERNET" config auto "ed" ? # ether 0xff0 00:00:48 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # RPTI EP401 Ethernet card card "RPTI" "EP401 Ethernet NE2000 Compatible" config 0x22 "ed" 9 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # SCM Ethernet Combo (*Not SMC :-)*) card "SCM" "Ethernet Combo card" config auto "ed" ? 0x10 # ether 0xff0 00:20:cb ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Epson EEN10B Ethernet Card card "Seiko Epson Corp." "Ethernet" config auto "ed" ? 0x10 # ether 0xff0 00:00:48 ether 0xff0 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # 3way 3WL-847-TX card "SUN WAY" "3WL-847-TX 100BASE-TX" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Surecom EtherPerfect EP-427 card "TAMARACK" "Ethernet" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # TDK LAK-CD031 card "TDK" "/LAK-CD031.*/" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Telecom Device SuperSocket RE450T and RE550T card "Telecom Device K.K." "/SuperSocket RE[45]50T/" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Toshiba Joho System PTJ-LAN/T card "TJ" "Ethernet" config auto "ed" ? 0x10 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Xircom CompactCard Ethernet 10 (CFE-10) card "Xircom" "CompactCard Ethernet" config auto "ed" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop ########## ep ########## # 3Com Fast Etherlink 3C574TX card "3Com" "3C574-TX Fast EtherLink PC Card" config 0x1 "ep" ? 0x1 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # 3Com Megahertz 3CXEM556 (only lan side) doesn't work yet card "3Com" "Megahertz 3CXEM556" config 0x1 "ep" ? 0x1 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # 3Com Megahertz 3CCFEM556BI, 3CXEM556B # as ethernet card "3Com" "/Megahertz 3C.*EM556/" config default "ep" ? 0x1 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # 3Com Megahertz 574B card "3Com" "Megahertz 574B" config 0x1 "ep" ? 0x1 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # 3Com Etherlink III 3CXE589EC # 3Com Etherlink III 3CXE589ET card "3Com" "Megahertz 589E" config 0x1 "ep" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # 3Com OfficeConnect 3CXSH572BT card "3Com" "OfficeConnect 572B" config 0x1 "ep" ? 0x1 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # 3Com Etherlink III 3C562 (as Network) # Don't think this will work. #card "3Com Corporation" "3C562" # config 0x9 "ep" ? # insert /etc/pccard_ether $device -link0 link1 # remove /sbin/ifconfig $device delete # 3Com Etherlink III 3C589B, 3C589C card "3Com Corporation" "3C589" config 0x1 "ep" ? # config auto "ep" ? insert /etc/pccard_ether $device start -link0 link1 # insert /etc/pccard_ether $device start link0 -link1 remove /etc/pccard_ether $device stop # 3Com Etherlink III 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep" ? # config auto "ep" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Farallon EtherMac card "Farallon" "ENet" config 0x1 "ep" ? insert /etc/pccard_ether $device start # insert /etc/pccard_ether $device start link0 remove /etc/pccard_ether $device stop ########## ex ########## # Olicom OC2220 card "Olicom" "Ethernet" config 0x1 "ex" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop ########## fe ########## # CONTEC C-NET(PC)C Ethernet card "CONTEC Co.,Ltd." "/C-NET\(PC\)C.*/" config auto "fe" ? # ether 0x58 00:80:4c ether 0x58 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Fujitsu MBH10303 Ethernet PCMCIA card "EAGLE Technology" "NE200 ETHERNET LAN MBH10303 " config auto "fe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Eiger Labs EPX-10BT card "Eiger labs,Inc." "EPX-10BT PC Card Ethernet 10BT" config auto "fe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Fujitsu FMV-J182, FMV-J182A card "FUJITSU" "LAN Card(FMV-J182)" config auto "fe" ? # These cards have same ID strings, and different MAC address # locations. # ether 0xf2c 00:00:0e #FMV-J182 # ether 0xf2c #FMV-J182 # ether 0x1cc 00:00:0e #FMV-J182A ether 0x1cc #FMV-J182A insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Fujitsu Towa LA501 Ethernet card "FUJITSU TOWA" "LA501" config auto "fe" ? 0x10 # ether 0x332 00:00:0e ether 0x332 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # HITACHI HT-4840-11 card "HITACHI" "HT-4840-11" config auto "fe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # NextCom J Link NC5310 card "NextComK.K." "/NC5310 Ver1\.0.*/" config auto "fe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # RATOC REX-5588, REX-9822, REX-4886 card "PCMCIA LAN MBH10304 ES" " 01" config auto "fe" ? # ether 0x32c 00:c0:d0 # many minor revs.... # ether 0x328 00:c0:d0 # ether 0x200 00:c0:d0 ether 0x200 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Fujitsu MBH10302 card "PCMCIA MBH10302" "01" config auto "fe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # RATOC REX-R280 card "RATOC System Inc." "10BASE_T CARD R280" config auto "fe" ? # ether 0x1fc 00:c0:d0 ether 0x1fc insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # TDK LAK-CD021, LAK-CD021A, LAK-CD021BX card "TDK" "LAC-CD02x" config auto "fe" ? # These cards have same ID strings, and different MAC address # locations. #ether 0x92 00:80:98 # LAC-CD021, LAC-021A #ether 0x96 00:80:98 # LAC-CD021BX insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop ########## fdc ########## # Libretto Floppy disk card "Y-E DATA" "External FDD" config 0x4 "fdc" ? ########## gp ########## # XXX NOT SUPPORTED YET # National Instruments PCMCIA-GPIB Cards #card "National Instruments" "PCMCIA-GPIB" # config default "gp" pio ########## hss ########## # XXX NOT SUPPORTED YET # Hitachi microcomputer speech synthesizer card #card "/HITACHI MICROCOMPUTER SYSTEM LTD.*/" "MSSHVPC02" # config default "hss" pio ########## joy ########## # XXX NOT SUPPORTED YET # IO DATA PCJOY #card "IO DATA" "PCJOY" # config default "joy" pio ## config 0x1 "joy" pio ## config 0x2 "joy" pio ########## ncv ########## # New Media Corporation BASICS SCSI # (Do not put this entry under Bustoaster) card "BASICS by New Media Corporation" "SCSI Sym53C500" config auto "ncv" ? # Media Intelligent SCSI-2 PC Card MSC-200 card "EPSON" "SCSI-2 PC Card SC200" config auto "ncv" ? # KME (TAXAN ICD-400PN, etc.) card "KME" "KXLC002" config auto "ncv" ? 0xb4d00000 # KME KXLC004 card "KME" "KXLC004" config auto "ncv" ? 0xb4d00100 # IO DATA PCSC-DV # Macnica Miracle SCSI mPS100 card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0" config auto "ncv" ? 0xb6250000 # Macnica Miracle SCSI-II mPS110 card "MACNICA" "MIRACLE SCSI-II mPS110" config auto "ncv" ? 0 # NEC PC-9801N-J03R card "NEC" "PC-9801N-J03R" config auto "ncv" ? 0 # Qlogic Fast SCSI card "QLOGIC CORPORATION" "pc05" config auto "ncv" ? 0x84d00000 # RATOC REX-9530 card "RATOC System Inc." "/SCSI2 CARD.*/" config auto "ncv" ? 0x84d00000 # RATOC REX-5572 (as SCSI only) #card "RATOC System Inc." "/SOUND/SCSI2 CARD.*/" config auto "ncv" ? 0x84d00000 # cardio 0x640 0x10 iosize 16 ########## nsp ########## # WORKBIT Ninja SCSI series card "IO DATA" "CBSC16 " config auto "nsp" ? # WORKBIT Ninja SCSI series card "WBT" "NinjaSCSI-3" config auto "nsp" ? # WORKBIT Ninja SCSI series (PIO mode) # (If you want to use them in PIO mode comment out above and uncommnet below.) #card "WBT" "NinjaSCSI-3" # config auto "nsp" ? 0x100 ########## opl ########## # XXX NOT SUPPORTED YET # RATOC REX-5570 Sound Card #card "1195 RATOC System Inc." "REX5570 SOUND CARD" # config default "opl" ? ########## scc ########## # XXX NOT SUPPORTED YET # IBM Smart Capture Card #card "IBM Corp." "Video Capture" # config default "scc" pio # cardmem 0xd4000 0x0 0x8000 ########## sio ########## # 3Com/USR/MegaHertz 3CCM156 card "3COM" "3CCM156" config 0x23 "sio" ? # 3com/USR/Megahertz 3CCM556 card "3Com" "3CXM/3CCM556" config 0x23 "sio" ? # 3Com Etherlink III 3C562 (as Modem) card "3Com Corporation" "3C562" config 0x09 "sio" ? # ADVANTECH COMpad-32/85 (dual port, but only one works) card "ADVANTECH" "COMpad-32/85" config auto "sio" ? 0x330 # AIWA PV-JF288 card "AIWA CO.,LTD." "PV-JF288 " config 0x23 "sio" ? # Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem. card "AD PC_CARD" "RC288ACL" config 0x22 "sio" ? # config auto "sio" ? # AIWA PV-JF3356 card "AIWA CO.,LTD. MODEM" "PV-JF3356" config auto "sio" ? 0x40000 # APEX DATA MultiCard (as Modem only) card "APEX DATA" "MULTICARD" config 0xb "sio" ? # Eiger 33.6 modem card "AT&T" "V34+ Fax Modem" config 0x23 "sio" ? # AT&T Paradyne KeepInTouch 14.4 modem card "AT&T Paradyne" "KeepInTouch Card" config 0x23 "sio" ? reset 1000 # BUG Linkboy D64K (ISDN) card "BUG Inc." "Linkboy D64K" config 0x23 "sio" ? # NewMedia 14.4K FAX/Data Modem card "CIRRUS LOGIC" "FAX MODEM" config 0x23 "sio" ? # COM1 SA card "COM1 SA" "MC218 CARD" config 0x3 "sio" ? # COM1 SA card "COM1 SA" "MC220 CARD" config 0x3 "sio" ? # Digiteam Expresso 14.4 Modem card "Digiteam GmbH" "Expresso Modem" config 0x24 "sio" ? # Eicon DIVA T/A # at@menu Config menu # at>vc View current profile # at>vd View troubleshooting information card "Eicon Technology" "DIVA T/A" config 0x5 "sio" ? # Ericsson DC23 GSM modem card card "ERICSSON" "Modem, DC23" config 0x21 "sio" ? # GATEWAY 2000 FAX/Data Modem (14.4K) card "GATEWAY2000" "CC3144" config 0x22 "sio" ? # This one does work though card "HAYES" "OPT288" config 0x23 "sio" ? # Hayes OPTIMA 288 FAX/Data Modem # currently does not work on my machine card "Hayes" "OPTIMA 288 + FAX fo" config 0x24 "sio" ? reset 10000 # IBM Push/Pop Modem (14.4K) card "IBM" "Push/Pop Modem(14.4K)" config 0x22 "sio" ? # IBM 56k PCCCARD modem card "IBM" "56K PC Card Modem" config 0x22 "sio" ? # Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem) card "Intel" "EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter" config 0x1f "sio" ? # US Robotics Worldport 14400 card "Intel" "MODEM 2400+" config 0x2 "sio" ? # Intelligent SurfCard card "Intelligent" "PCMCIA FAX+MODEM" config 0x1f "sio" ? reset 1000 # Megahertz XJEM3288 (as modem) card "MEGAHERTZ" "CC/XJEM3288" config auto "sio" ? # Megahertz XJEM1336 (as modem) card "MEGAHERTZ" "CC/XJEM3336" config auto "sio" ? # Megahertz XJ1144 card "MEGAHERTZ" "XJ1144" config 0x23 "sio" ? # Megahertz XJ2144 (US) card "MEGAHERTZ" "XJ2144" config 0x23 "sio" ? # Megahertz XJ2144 (JP) card "MEGAHERTZ" "XJ2144-81" config 0x23 "sio" ? # Megahertz XJ2288 card "MEGAHERTZ" "XJ2288" config 0x23 "sio" ? # Megahertz XJ3288 card "MEGAHERTZ" "XJ3288" config 0x21 "sio" ? # Megahertz XJ-CC4288 card "Megahertz" "XJ-CC4288" config 0x23 "sio" ? # Megahertz XJ4336 card "Megahertz" "XJ4336-CC4336" config 0x22 "sio" ? # config auto "sio" ? # config 0x23 "sio" ? # XXX generic serial? # Megahertz X-Jack Ethernet/Modem 14.4K (as Modem only) card "Megahertz" "XJEM1144/CCEM1144" config 0x27 "sio" ? # Motorola Montana card "Motorola" "MONTANA 33.6 FAX/MODEM" config 0x21 "sio" ? # XXX generic serial? # Motorola Marine multifunction card (as modem) card "Motorola, Inc." "MARINER MODEM/FAX/LAN" config 0x35 "sio" ? # Nokia Card Phone 2.0 (gsm900/dcs1800 HSCSD terminal) card "Nokia Mobile Phones" "Nokia Card Phone" config 0x3 "sio" ? # NTT ThunderCard Modem card "NTT-IT CO., LTD" "ThunderCard AVF288, V.34" config 0x22 "sio" ? # NTT DoCoMo Mobile D Card 96P1 card "NTT DoCoMo" "Mobile D Card 96P1" # config 0x22 "sio" ? 0x82 config 0x23 "sio" ? 0x82 # config auto "sio" ? 0x82 # NTT DoCoMo (formerly NTT Personal) Paldio 611S card "NTT DoCoMo" "PALDIO 611S PC CARD" config auto "sio" ? 0x40000 # NTT DoCoMo DATA/FAX Adapter card "NTT DoCoMo" "PCMCIA DATA/FAX ADAPTER 9600 Mark2" config auto "sio" ? # NTT DoCoMo DATA/FAX Adapter card "NTT DoCoMo" "/PCMCIA DATA/FAX.*/" config auto "sio" ? 0x82 # NTT-IT ThunderCard card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128" config auto "sio" ? 0x80 reset 1000 # NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 321S card "NTT Personal" "32K Paldio 321S PC CARD" config 0x23 "sio" ? # NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 341S card "NTT Personal" "32K Paldio 341S PC CARD" config 0x23 "sio" ? # NTT Personal Paldio Data Card DC-1S card "NTT Personal" "/Paldio Data.*/" "DC-1S" config auto "sio" ? 0x40000 # Nokia Cellular Data Card card "Nokia Mobile Phones" "DTP-2" config 0x22 "sio" ? config 0x23 "sio" ? # This Nokia example allows either 1 or 2 Nokia cards to be fitted. # With 2 Mobile Phones and Multilink PPP you can get a 19200 data channel. # Nokia Cellular Data Card card "Nokia Mobile Phones" "DTP-2 ver II" config 0x23 "sio" ? config 0x24 "sio" ? # Novalink NovaModem 144 card "NovaLink Tech." "NovaModem 144 " config 0x23 "sio" ? # Novatel Merlin CDPD card (wireless modem) card "Novatel Wireless" "Merlin Type II Wireless IP Modem" config auto "sio" ? # Omron ME2814 FAX/DATA MODEM card "OMRON" "ME2814 FAX/DATA MOD" config 0x23 "sio" ? # Omron MD24XCA FAX/Data Modem card "OMRON Corp." "MD24XCA" config 0x23 "sio" ? reset 10000 # Option International PCMCIA55K06 card "Option International" "GSM Data/Fax/SMS Modem" config 0x22 "sio" ? # Banksia CardModem 56 card "PCCardModem" "CardModem 56" config 0x22 "sio" ? # Eiger PCCARD modem # Apparently this modem does not work unless the recommended # init string (AT&F&C1&D2) is supplied. card "PCMCIA " "33.6K Fax/Modem " config 23 "sio" ? # Actiontec Datalink with v.90 upgrade card "PCMCIA " "56K V.90 Fax Modem (LK) " config 0x1f "sio" ? # Billionton 56Kbps Fax Modem card "PCMCIA CARD 56KFaxModem" "FM56C-NFS" config 0x22 "sio" ? # PREMAX FM288 FAX/Data Modem card "PREMAX" "FM288 " config 0x23 "sio" ? # Panasonic FM-RADIO card card "Panasonic" "CF-JVR101" config 0x22 "sio" ? # Panasonic KX-PH402D card "Panasonic" "KX-PH402D" config 0x23 "sio" ? # Panasonic Modem Card TO-706C card "Panasonic" "TO-706C" config 0x23 "sio" ? # Panasonic Modem Card TO-706C card "Panasonic" "TO-CAF288" config 0x23 "sio" ? # Panasonic TO-CAF56K FAX/Data Modem card "Panasonic Co." "TO-CAF56K" # config auto "sio" pio config auto "sio" ? reset 10000 # Random modem bundled with Dell systems card "Psion Dacom" "Gold Card Global 56K+Fax" config 0x23 "sio" ? # RFI HotLine serial card card "RFI" "RS-232 ComCard Rev.II" config 0x23 "sio" ? # SII MC-6530 card "SII" "PHS DATA 32S" config auto "sio" ? 0x40000 # SII (DDI) MC-6550 card "SII" "PHS DATA 64" config auto "sio" ? 0x40000 # TDK 14.4 FAX/Data Modem card "TDK" "DF1414 DATA/FAX MOD" config 0x23 "sio" ? # TDK 14.4 FAX/Data Modem card "TDK" "DF1414EX DATA/FAX M" config 0x23 "sio" ? # TDK DN1280R card "TDK" "DN1280R" config auto "sio" ? reset 1000 # TDK DP9600 card "TDK" "DP9600" config auto "sio" ? 0x40000 # XXX NOT SURE SUPPORTED # TDK Multifunctioon Card (as Modem) #card "TDK" "GlobalNetworker 3410/3412" # config auto "sio" ? 0x40000 # Toshiba Modem/LAN card IPC5001B (as Modem) card "TOSHIBA" "Modem/LAN Card" config 0x25 "sio" ? # 3Com/USR/Toshiba SLIMV90 card "TOSHIBA" "SLIMV90" config 0x4 "sio" ? # 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks) card "Toshiba America" "3CXM056-BNW" config 0x20 "sio" ? # U.S. Robotics XJ1560J card "U.S. Robotics" "XJ/CC1560J" config 0x22 "sio" ? # Megahertz XJ1336 card "U.S. Robotics" "XJ/CC1336" config 0x21 "sio" ? # US Robotics Sportster PCMCIA V.34 # US Robotics COURIER PCMCIA V.34 card "USRobotics" "PCMCIA 28800 Data/F" config 0x3 "sio" ? # Viking V.90/K56Flex modem card "Viking" "V.90 K56flex" config 0x23 "sio" ? # Xircom CreditCard Ethernet+Modem (Modem only !!!) card "Xircom" "CreditCard Ethernet" config 0x23 "sio" ? # Xircom CreditCard Ethernet 10/100 + modem (modem part) card "Xircom" "CreditCard Ethernet+Modem 33.6" config 0x23 "sio" ? # Xircom GlobalACCESS modem card "Xircom" "CreditCard Modem 56 - GlobalACCESS" config 0x1f "sio" ? # Xircom CreditCard Modem card "Xircom" "CreditCard Modem CM-56T" config 0x17 "sio" ? reset 100 # Zoom 56K modem # Freezes your system entirely if you don't have the reset.. card "Zoom Telephonics, Inc." "PCMCIA 56K LT DataFax" config 0x1f "sio" ? reset 1000 ########## sn ########## # Megahertz X-Jack Ethernet card "Megahertz" "CC10BT/2" config 0x1 "sn" ? ether attr2 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Megahertz Ethernet Adapter card "Megahertz" "ETHERNET ADAPTOR" config auto "sn" ? # ether attr2hex 00:00:86 ether attr2 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Megahertz X-Jack Ethernet/Modem 14.4K #card "MEGAHERTZ" "XJEM1144/CCEM1144" # multifunc # config default "sn" ? # config 0x27 "sio" shared # MELCO LPC-TX card "MELCO/SMC" "LPC-TX" config auto "sn" ? # ether 0x4a 00:a0:dc ether 0x4a insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # SMC EtherEZ Combo(SMC8020BT) card "SMC" "EtherEZ Ethernet 8020" config default "sn" ? # ether 0x9a 00:00:c0 # ether 0x9a insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Victor M-MOIL CARD card "JVC" "MiniMoil Ethernet Card" config 0x01 "sn" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop ########## spc ########## # REX5535AC, REX5535X SCSI card "PCMCIA SCSI MBH1040" "01" config 0x3a "spc" ? ########## stg ########## # RATOC REX-5536, Melco IFC-SC card "1195 RATOC System Inc." "REX5536 SCSI2 CARD" config auto "stg" ? 0 # Future Domain SCSI2GO card "Future Domain Corporation" "SCSI PCMCIA Credit Card Controller" config auto "stg" ? # IBM SCSI PCMCIA Card card "IBM Corp." "SCSI PCMCIA Card" config auto "stg" ? # RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI # (Don't put this entry under REX5535 series!) # There's a buggy revision of this card which has broken CIS tupples. # if you can't use this card, please use the point enabler. (for example, # type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command prompt) card "PCMCIA SCSI MBH10404" "01" config 0x37 "stg" ? logstr "RATOC REX-5536AM SCSI" # RATOC REX-5536M card "PCMCIA SCSI2 CARD" "01" config auto "stg" ? 0 logstr "RATOC REX-5536M SCSI" ########## wlp ########## # XXX NOT SUPPORTED YET # AT&T GIS Wavelan PCMCIA # If you want to use Japanese version, uncomment the second config # line and comment-out the first line. #card "AT&T" "WaveLAN/PCMCIA" # config default "wlp" ? # US version (915MHz) ## config default "wlp" ? 0x01 # Japanese version (2.4GHz) ## ether wavelan # insert /etc/pccard_ether $device start # remove /etc/pccard_ether $device stop # XXX NOT SUPPORTED YET # Digital RoamAbout #card "Digital" "RoamAbout/DS" # config auto "wlp" ? ## ether wavelan # insert /usr/sbin/wlpconfig -i wlp0 -w 0xaaaa # insert /etc/pccard_ether $device start # remove /etc/pccard_ether $device stop # XXX NOT SUPPORTED YET # Lucent Wavelan #card "Lucent Technologies" "WaveLAN/PCMCIA" # config default "wlp" ? # ether wavelan # insert /etc/pccard_ether $device start # remove /etc/pccard_ether $device stop # XXX NOT SUPPORTED YET # NCR Wavelan PCMCIA # If you want to use Japanese version, uncomment the second config # line and comment-out the first line. #card "NCR" "WaveLAN/PCMCIA" # config default "wlp" ? # US version (915MHz) ## config default "wlp" ? 0x01 # Japanese version (2.4GHz) # ether wavelan # insert /etc/pccard_ether $device start # remove /etc/pccard_ether $device stop ########## wi ########## # Cabletron RoamAbout, WaveLAN/IEEE clone card "Cabletron" "RoamAbout 802.11 DS" config 0x1 "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Compaq WL100 card "Compaq" "WL100_11Mbps_Wireless_PC_Card" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Corega KK Wireless LAN PCC-11 card "corega K.K." "Wireless LAN PCC-11" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Laneed Wireless card config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ELECOM Air@Hawk/LD-WL11/PCC (0.7.5) card "ELECOM" "Air@Hark/LD-WL11/PCC" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ELECOM Air@Hawk/LD-WL11/PCC (0.7.6 and later) card "ELECOM" "Air@Hawk/LD-WL11/PCC" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ICOM SL-1100 card "ICOM" "SL-1100" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Farallon Skyline 11Mbps Wireless card "INTERSIL" "HFA384x/IEEE" config 0x1 "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Lucent WaveLAN/IEEE card "Lucent Technologies" "WaveLAN/IEEE" config 0x1 "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Melco Airconnect card "MELCO" "WLI-PCM-L11" config 0x1 "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # NCR WaveLAN/IEEE card "NCR" "WaveLAN/IEEE" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # NEC Wireless Card CMZ-RT-WP card "NEC" "Wireless Card CMZ-RT-WP" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # PLANEX GeoWave/GW-NS110 card "PLANEX" "GeoWave/GW-NS110" config 0x1 "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # TDK LAK-CD011WL card "TDK" "LAK-CD011WL for Wireless LAN" config auto "wi" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop ########## xe ########## # Accton EN2226/Fast EtherCard (16-bit verison) card "Accton" "Fast EtherCard-16" config auto "xe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Compaq Netelligent 10/100 PC Card card "Compaq" "Netelligent 10/100 PC Card" config 0x1 "xe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison) card "Intel" "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16" config 0x1 "xe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # XXX NOT SURE SUPPORTED # Toshiba 10/100 Ethernet PC Card IPC5008A #card "Toshiba" "10/100 Ethernet PC Card" # config auto "xe" ? ## cardio 0x300 0x10 # iosize 16 # insert /etc/pccard_ether $device start # remove /etc/pccard_ether $device stop # Xircom Realport card + modem card "Xircom" "16-bit Ethernet + Modem 56" config 0x27 "xe" 9 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Xircom CreditCard Ethernet 10/100 card "Xircom" "CreditCard 10/100" config 0x1 "xe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10) card "Xircom" "CreditCard 10Base-T" config auto "xe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # Xircom CreditCard Ethernet 10/100 + modem (Ethernet part) card "Xircom" "CreditCard Ethernet 10/100 + Modem 56" config 0x27 "xe" ? insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop # ------------------------------------------------------------------- # # "Wildcard" entries # # ------------------------------------------------------------------- # GENERIC PCMCIA modem generic serial config auto "sio" ? reset 10000 # for unstable cards logstr "GENERIC PCMCIA modem" # GENERIC Flash ATA / ATA HDD generic fixed_disk config auto "ata" ? logstr "GENERIC Flash ATA / ATA HDD"