/*- * Copyright (c) 2001 Wind River Systems * Copyright (c) 1997, 1998, 1999, 2001 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * Broadcom BCM57xx(x)/BCM590x NetXtreme and NetLink family Ethernet driver * * The Broadcom BCM5700 is based on technology originally developed by * Alteon Networks as part of the Tigon I and Tigon II Gigabit Ethernet * MAC chips. The BCM5700, sometimes referred to as the Tigon III, has * two on-board MIPS R4000 CPUs and can have as much as 16MB of external * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo * frames, highly configurable RX filtering, and 16 RX and TX queues * (which, along with RX filter rules, can be used for QOS applications). * Other features, such as TCP segmentation, may be available as part * of value-added firmware updates. Unlike the Tigon I and Tigon II, * firmware images can be stored in hardware and need not be compiled * into the driver. * * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus. * * The BCM5701 is a single-chip solution incorporating both the BCM5700 * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701 * does not support external SSRAM. * * Broadcom also produces a variation of the BCM5700 under the "Altima" * brand name, which is functionally similar but lacks PCI-X support. * * Without external SSRAM, you can only have at most 4 TX rings, * and the use of the mini RX ring is disabled. This seems to imply * that these features are simply not available on the BCM5701. As a * result, this driver does not implement any support for the mini RX * ring. */ #ifdef HAVE_KERNEL_OPTION_HEADERS #include "opt_device_polling.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "miidevs.h" #include #ifdef __sparc64__ #include #include #include #include #endif #include #include #include #define BGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP) #define ETHER_MIN_NOPAD (ETHER_MIN_LEN - ETHER_CRC_LEN) /* i.e., 60 */ MODULE_DEPEND(bge, pci, 1, 1, 1); MODULE_DEPEND(bge, ether, 1, 1, 1); MODULE_DEPEND(bge, miibus, 1, 1, 1); /* "device miibus" required. See GENERIC if you get errors here. */ #include "miibus_if.h" /* * Various supported device vendors/types and their names. Note: the * spec seems to indicate that the hardware still has Alteon's vendor * ID burned into it, though it will always be overriden by the vendor * ID in the EEPROM. Just to be safe, we cover all possibilities. */ static const struct bge_type { uint16_t bge_vid; uint16_t bge_did; } bge_devs[] = { { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5700 }, { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5701 }, { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1000 }, { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1002 }, { ALTIMA_VENDORID, ALTIMA_DEVICE_AC9100 }, { APPLE_VENDORID, APPLE_DEVICE_BCM5701 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5700 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5701 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5702 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5702_ALT }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5702X }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5703 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5703_ALT }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5703X }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5704C }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S_ALT }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5705 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5705F }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5705K }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M_ALT }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5714C }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5714S }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5715 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5715S }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5717 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5718 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5719 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5720 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5721 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5722 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5723 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5750 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5750M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5751 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5751F }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5751M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5752 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5752M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5753 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5753F }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5753M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5754 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5754M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5755 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5755M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5756 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5761 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5761E }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5761S }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5761SE }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5764 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5780 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5780S }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5781 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5782 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5784 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5785F }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5785G }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5786 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5787 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5787F }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5787M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5788 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5789 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5901 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5901A2 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5903M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5906 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM5906M }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57760 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57761 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57762 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57765 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57766 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57780 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57781 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57785 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57788 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57790 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57791 }, { BCOM_VENDORID, BCOM_DEVICEID_BCM57795 }, { SK_VENDORID, SK_DEVICEID_ALTIMA }, { TC_VENDORID, TC_DEVICEID_3C996 }, { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE4 }, { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE5 }, { FJTSU_VENDORID, FJTSU_DEVICEID_PP250450 }, { 0, 0 } }; static const struct bge_vendor { uint16_t v_id; const char *v_name; } bge_vendors[] = { { ALTEON_VENDORID, "Alteon" }, { ALTIMA_VENDORID, "Altima" }, { APPLE_VENDORID, "Apple" }, { BCOM_VENDORID, "Broadcom" }, { SK_VENDORID, "SysKonnect" }, { TC_VENDORID, "3Com" }, { FJTSU_VENDORID, "Fujitsu" }, { 0, NULL } }; static const struct bge_revision { uint32_t br_chipid; const char *br_name; } bge_revisions[] = { { BGE_CHIPID_BCM5700_A0, "BCM5700 A0" }, { BGE_CHIPID_BCM5700_A1, "BCM5700 A1" }, { BGE_CHIPID_BCM5700_B0, "BCM5700 B0" }, { BGE_CHIPID_BCM5700_B1, "BCM5700 B1" }, { BGE_CHIPID_BCM5700_B2, "BCM5700 B2" }, { BGE_CHIPID_BCM5700_B3, "BCM5700 B3" }, { BGE_CHIPID_BCM5700_ALTIMA, "BCM5700 Altima" }, { BGE_CHIPID_BCM5700_C0, "BCM5700 C0" }, { BGE_CHIPID_BCM5701_A0, "BCM5701 A0" }, { BGE_CHIPID_BCM5701_B0, "BCM5701 B0" }, { BGE_CHIPID_BCM5701_B2, "BCM5701 B2" }, { BGE_CHIPID_BCM5701_B5, "BCM5701 B5" }, { BGE_CHIPID_BCM5703_A0, "BCM5703 A0" }, { BGE_CHIPID_BCM5703_A1, "BCM5703 A1" }, { BGE_CHIPID_BCM5703_A2, "BCM5703 A2" }, { BGE_CHIPID_BCM5703_A3, "BCM5703 A3" }, { BGE_CHIPID_BCM5703_B0, "BCM5703 B0" }, { BGE_CHIPID_BCM5704_A0, "BCM5704 A0" }, { BGE_CHIPID_BCM5704_A1, "BCM5704 A1" }, { BGE_CHIPID_BCM5704_A2, "BCM5704 A2" }, { BGE_CHIPID_BCM5704_A3, "BCM5704 A3" }, { BGE_CHIPID_BCM5704_B0, "BCM5704 B0" }, { BGE_CHIPID_BCM5705_A0, "BCM5705 A0" }, { BGE_CHIPID_BCM5705_A1, "BCM5705 A1" }, { BGE_CHIPID_BCM5705_A2, "BCM5705 A2" }, { BGE_CHIPID_BCM5705_A3, "BCM5705 A3" }, { BGE_CHIPID_BCM5750_A0, "BCM5750 A0" }, { BGE_CHIPID_BCM5750_A1, "BCM5750 A1" }, { BGE_CHIPID_BCM5750_A3, "BCM5750 A3" }, { BGE_CHIPID_BCM5750_B0, "BCM5750 B0" }, { BGE_CHIPID_BCM5750_B1, "BCM5750 B1" }, { BGE_CHIPID_BCM5750_C0, "BCM5750 C0" }, { BGE_CHIPID_BCM5750_C1, "BCM5750 C1" }, { BGE_CHIPID_BCM5750_C2, "BCM5750 C2" }, { BGE_CHIPID_BCM5714_A0, "BCM5714 A0" }, { BGE_CHIPID_BCM5752_A0, "BCM5752 A0" }, { BGE_CHIPID_BCM5752_A1, "BCM5752 A1" }, { BGE_CHIPID_BCM5752_A2, "BCM5752 A2" }, { BGE_CHIPID_BCM5714_B0, "BCM5714 B0" }, { BGE_CHIPID_BCM5714_B3, "BCM5714 B3" }, { BGE_CHIPID_BCM5715_A0, "BCM5715 A0" }, { BGE_CHIPID_BCM5715_A1, "BCM5715 A1" }, { BGE_CHIPID_BCM5715_A3, "BCM5715 A3" }, { BGE_CHIPID_BCM5717_A0, "BCM5717 A0" }, { BGE_CHIPID_BCM5717_B0, "BCM5717 B0" }, { BGE_CHIPID_BCM5719_A0, "BCM5719 A0" }, { BGE_CHIPID_BCM5720_A0, "BCM5720 A0" }, { BGE_CHIPID_BCM5755_A0, "BCM5755 A0" }, { BGE_CHIPID_BCM5755_A1, "BCM5755 A1" }, { BGE_CHIPID_BCM5755_A2, "BCM5755 A2" }, { BGE_CHIPID_BCM5722_A0, "BCM5722 A0" }, { BGE_CHIPID_BCM5761_A0, "BCM5761 A0" }, { BGE_CHIPID_BCM5761_A1, "BCM5761 A1" }, { BGE_CHIPID_BCM5784_A0, "BCM5784 A0" }, { BGE_CHIPID_BCM5784_A1, "BCM5784 A1" }, /* 5754 and 5787 share the same ASIC ID */ { BGE_CHIPID_BCM5787_A0, "BCM5754/5787 A0" }, { BGE_CHIPID_BCM5787_A1, "BCM5754/5787 A1" }, { BGE_CHIPID_BCM5787_A2, "BCM5754/5787 A2" }, { BGE_CHIPID_BCM5906_A1, "BCM5906 A1" }, { BGE_CHIPID_BCM5906_A2, "BCM5906 A2" }, { BGE_CHIPID_BCM57765_A0, "BCM57765 A0" }, { BGE_CHIPID_BCM57765_B0, "BCM57765 B0" }, { BGE_CHIPID_BCM57780_A0, "BCM57780 A0" }, { BGE_CHIPID_BCM57780_A1, "BCM57780 A1" }, { 0, NULL } }; /* * Some defaults for major revisions, so that newer steppings * that we don't know about have a shot at working. */ static const struct bge_revision bge_majorrevs[] = { { BGE_ASICREV_BCM5700, "unknown BCM5700" }, { BGE_ASICREV_BCM5701, "unknown BCM5701" }, { BGE_ASICREV_BCM5703, "unknown BCM5703" }, { BGE_ASICREV_BCM5704, "unknown BCM5704" }, { BGE_ASICREV_BCM5705, "unknown BCM5705" }, { BGE_ASICREV_BCM5750, "unknown BCM5750" }, { BGE_ASICREV_BCM5714_A0, "unknown BCM5714" }, { BGE_ASICREV_BCM5752, "unknown BCM5752" }, { BGE_ASICREV_BCM5780, "unknown BCM5780" }, { BGE_ASICREV_BCM5714, "unknown BCM5714" }, { BGE_ASICREV_BCM5755, "unknown BCM5755" }, { BGE_ASICREV_BCM5761, "unknown BCM5761" }, { BGE_ASICREV_BCM5784, "unknown BCM5784" }, { BGE_ASICREV_BCM5785, "unknown BCM5785" }, /* 5754 and 5787 share the same ASIC ID */ { BGE_ASICREV_BCM5787, "unknown BCM5754/5787" }, { BGE_ASICREV_BCM5906, "unknown BCM5906" }, { BGE_ASICREV_BCM57765, "unknown BCM57765" }, { BGE_ASICREV_BCM57766, "unknown BCM57766" }, { BGE_ASICREV_BCM57780, "unknown BCM57780" }, { BGE_ASICREV_BCM5717, "unknown BCM5717" }, { BGE_ASICREV_BCM5719, "unknown BCM5719" }, { BGE_ASICREV_BCM5720, "unknown BCM5720" }, { 0, NULL } }; #define BGE_IS_JUMBO_CAPABLE(sc) ((sc)->bge_flags & BGE_FLAG_JUMBO) #define BGE_IS_5700_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5700_FAMILY) #define BGE_IS_5705_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5705_PLUS) #define BGE_IS_5714_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5714_FAMILY) #define BGE_IS_575X_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_575X_PLUS) #define BGE_IS_5755_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5755_PLUS) #define BGE_IS_5717_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5717_PLUS) #define BGE_IS_57765_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_57765_PLUS) static uint32_t bge_chipid(device_t); static const struct bge_vendor * bge_lookup_vendor(uint16_t); static const struct bge_revision * bge_lookup_rev(uint32_t); typedef int (*bge_eaddr_fcn_t)(struct bge_softc *, uint8_t[]); static int bge_probe(device_t); static int bge_attach(device_t); static int bge_detach(device_t); static int bge_suspend(device_t); static int bge_resume(device_t); static void bge_release_resources(struct bge_softc *); static void bge_dma_map_addr(void *, bus_dma_segment_t *, int, int); static int bge_dma_alloc(struct bge_softc *); static void bge_dma_free(struct bge_softc *); static int bge_dma_ring_alloc(struct bge_softc *, bus_size_t, bus_size_t, bus_dma_tag_t *, uint8_t **, bus_dmamap_t *, bus_addr_t *, const char *); static void bge_devinfo(struct bge_softc *); static int bge_mbox_reorder(struct bge_softc *); static int bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]); static int bge_get_eaddr_mem(struct bge_softc *, uint8_t[]); static int bge_get_eaddr_nvram(struct bge_softc *, uint8_t[]); static int bge_get_eaddr_eeprom(struct bge_softc *, uint8_t[]); static int bge_get_eaddr(struct bge_softc *, uint8_t[]); static void bge_txeof(struct bge_softc *, uint16_t); static void bge_rxcsum(struct bge_softc *, struct bge_rx_bd *, struct mbuf *); static int bge_rxeof(struct bge_softc *, uint16_t, int); static void bge_asf_driver_up (struct bge_softc *); static void bge_tick(void *); static void bge_stats_clear_regs(struct bge_softc *); static void bge_stats_update(struct bge_softc *); static void bge_stats_update_regs(struct bge_softc *); static struct mbuf *bge_check_short_dma(struct mbuf *); static struct mbuf *bge_setup_tso(struct bge_softc *, struct mbuf *, uint16_t *, uint16_t *); static int bge_encap(struct bge_softc *, struct mbuf **, uint32_t *); static void bge_intr(void *); static int bge_msi_intr(void *); static void bge_intr_task(void *, int); static void bge_start_locked(struct ifnet *); static void bge_start(struct ifnet *); static int bge_ioctl(struct ifnet *, u_long, caddr_t); static void bge_init_locked(struct bge_softc *); static void bge_init(void *); static void bge_stop_block(struct bge_softc *, bus_size_t, uint32_t); static void bge_stop(struct bge_softc *); static void bge_watchdog(struct bge_softc *); static int bge_shutdown(device_t); static int bge_ifmedia_upd_locked(struct ifnet *); static int bge_ifmedia_upd(struct ifnet *); static void bge_ifmedia_sts(struct ifnet *, struct ifmediareq *); static uint8_t bge_nvram_getbyte(struct bge_softc *, int, uint8_t *); static int bge_read_nvram(struct bge_softc *, caddr_t, int, int); static uint8_t bge_eeprom_getbyte(struct bge_softc *, int, uint8_t *); static int bge_read_eeprom(struct bge_softc *, caddr_t, int, int); static void bge_setpromisc(struct bge_softc *); static void bge_setmulti(struct bge_softc *); static void bge_setvlan(struct bge_softc *); static __inline void bge_rxreuse_std(struct bge_softc *, int); static __inline void bge_rxreuse_jumbo(struct bge_softc *, int); static int bge_newbuf_std(struct bge_softc *, int); static int bge_newbuf_jumbo(struct bge_softc *, int); static int bge_init_rx_ring_std(struct bge_softc *); static void bge_free_rx_ring_std(struct bge_softc *); static int bge_init_rx_ring_jumbo(struct bge_softc *); static void bge_free_rx_ring_jumbo(struct bge_softc *); static void bge_free_tx_ring(struct bge_softc *); static int bge_init_tx_ring(struct bge_softc *); static int bge_chipinit(struct bge_softc *); static int bge_blockinit(struct bge_softc *); static uint32_t bge_dma_swap_options(struct bge_softc *); static int bge_has_eaddr(struct bge_softc *); static uint32_t bge_readmem_ind(struct bge_softc *, int); static void bge_writemem_ind(struct bge_softc *, int, int); static void bge_writembx(struct bge_softc *, int, int); #ifdef notdef static uint32_t bge_readreg_ind(struct bge_softc *, int); #endif static void bge_writemem_direct(struct bge_softc *, int, int); static void bge_writereg_ind(struct bge_softc *, int, int); static int bge_miibus_readreg(device_t, int, int); static int bge_miibus_writereg(device_t, int, int, int); static void bge_miibus_statchg(device_t); #ifdef DEVICE_POLLING static int bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); #endif #define BGE_RESET_SHUTDOWN 0 #define BGE_RESET_START 1 #define BGE_RESET_SUSPEND 2 static void bge_sig_post_reset(struct bge_softc *, int); static void bge_sig_legacy(struct bge_softc *, int); static void bge_sig_pre_reset(struct bge_softc *, int); static void bge_stop_fw(struct bge_softc *); static int bge_reset(struct bge_softc *); static void bge_link_upd(struct bge_softc *); static void bge_ape_lock_init(struct bge_softc *); static void bge_ape_read_fw_ver(struct bge_softc *); static int bge_ape_lock(struct bge_softc *, int); static void bge_ape_unlock(struct bge_softc *, int); static void bge_ape_send_event(struct bge_softc *, uint32_t); static void bge_ape_driver_state_change(struct bge_softc *, int); /* * The BGE_REGISTER_DEBUG option is only for low-level debugging. It may * leak information to untrusted users. It is also known to cause alignment * traps on certain architectures. */ #ifdef BGE_REGISTER_DEBUG static int bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS); static int bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS); static int bge_sysctl_ape_read(SYSCTL_HANDLER_ARGS); static int bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS); #endif static void bge_add_sysctls(struct bge_softc *); static void bge_add_sysctl_stats_regs(struct bge_softc *, struct sysctl_ctx_list *, struct sysctl_oid_list *); static void bge_add_sysctl_stats(struct bge_softc *, struct sysctl_ctx_list *, struct sysctl_oid_list *); static int bge_sysctl_stats(SYSCTL_HANDLER_ARGS); static device_method_t bge_methods[] = { /* Device interface */ DEVMETHOD(device_probe, bge_probe), DEVMETHOD(device_attach, bge_attach), DEVMETHOD(device_detach, bge_detach), DEVMETHOD(device_shutdown, bge_shutdown), DEVMETHOD(device_suspend, bge_suspend), DEVMETHOD(device_resume, bge_resume), /* MII interface */ DEVMETHOD(miibus_readreg, bge_miibus_readreg), DEVMETHOD(miibus_writereg, bge_miibus_writereg), DEVMETHOD(miibus_statchg, bge_miibus_statchg), DEVMETHOD_END }; static driver_t bge_driver = { "bge", bge_methods, sizeof(struct bge_softc) }; static devclass_t bge_devclass; DRIVER_MODULE(bge, pci, bge_driver, bge_devclass, 0, 0); DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0); static int bge_allow_asf = 1; TUNABLE_INT("hw.bge.allow_asf", &bge_allow_asf); static SYSCTL_NODE(_hw, OID_AUTO, bge, CTLFLAG_RD, 0, "BGE driver parameters"); SYSCTL_INT(_hw_bge, OID_AUTO, allow_asf, CTLFLAG_RD, &bge_allow_asf, 0, "Allow ASF mode if available"); #define SPARC64_BLADE_1500_MODEL "SUNW,Sun-Blade-1500" #define SPARC64_BLADE_1500_PATH_BGE "/pci@1f,700000/network@2" #define SPARC64_BLADE_2500_MODEL "SUNW,Sun-Blade-2500" #define SPARC64_BLADE_2500_PATH_BGE "/pci@1c,600000/network@3" #define SPARC64_OFW_SUBVENDOR "subsystem-vendor-id" static int bge_has_eaddr(struct bge_softc *sc) { #ifdef __sparc64__ char buf[sizeof(SPARC64_BLADE_1500_PATH_BGE)]; device_t dev; uint32_t subvendor; dev = sc->bge_dev; /* * The on-board BGEs found in sun4u machines aren't fitted with * an EEPROM which means that we have to obtain the MAC address * via OFW and that some tests will always fail. We distinguish * such BGEs by the subvendor ID, which also has to be obtained * from OFW instead of the PCI configuration space as the latter * indicates Broadcom as the subvendor of the netboot interface. * For early Blade 1500 and 2500 we even have to check the OFW * device path as the subvendor ID always defaults to Broadcom * there. */ if (OF_getprop(ofw_bus_get_node(dev), SPARC64_OFW_SUBVENDOR, &subvendor, sizeof(subvendor)) == sizeof(subvendor) && (subvendor == FJTSU_VENDORID || subvendor == SUN_VENDORID)) return (0); memset(buf, 0, sizeof(buf)); if (OF_package_to_path(ofw_bus_get_node(dev), buf, sizeof(buf)) > 0) { if (strcmp(sparc64_model, SPARC64_BLADE_1500_MODEL) == 0 && strcmp(buf, SPARC64_BLADE_1500_PATH_BGE) == 0) return (0); if (strcmp(sparc64_model, SPARC64_BLADE_2500_MODEL) == 0 && strcmp(buf, SPARC64_BLADE_2500_PATH_BGE) == 0) return (0); } #endif return (1); } static uint32_t bge_readmem_ind(struct bge_softc *sc, int off) { device_t dev; uint32_t val; if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4) return (0); dev = sc->bge_dev; pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4); pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); return (val); } static void bge_writemem_ind(struct bge_softc *sc, int off, int val) { device_t dev; if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4) return; dev = sc->bge_dev; pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4); pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); } #ifdef notdef static uint32_t bge_readreg_ind(struct bge_softc *sc, int off) { device_t dev; dev = sc->bge_dev; pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); return (pci_read_config(dev, BGE_PCI_REG_DATA, 4)); } #endif static void bge_writereg_ind(struct bge_softc *sc, int off, int val) { device_t dev; dev = sc->bge_dev; pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); pci_write_config(dev, BGE_PCI_REG_DATA, val, 4); } static void bge_writemem_direct(struct bge_softc *sc, int off, int val) { CSR_WRITE_4(sc, off, val); } static void bge_writembx(struct bge_softc *sc, int off, int val) { if (sc->bge_asicrev == BGE_ASICREV_BCM5906) off += BGE_LPMBX_IRQ0_HI - BGE_MBX_IRQ0_HI; CSR_WRITE_4(sc, off, val); if ((sc->bge_flags & BGE_FLAG_MBOX_REORDER) != 0) CSR_READ_4(sc, off); } /* * Clear all stale locks and select the lock for this driver instance. */ static void bge_ape_lock_init(struct bge_softc *sc) { uint32_t bit, regbase; int i; if (sc->bge_asicrev == BGE_ASICREV_BCM5761) regbase = BGE_APE_LOCK_GRANT; else regbase = BGE_APE_PER_LOCK_GRANT; /* Clear any stale locks. */ for (i = BGE_APE_LOCK_PHY0; i <= BGE_APE_LOCK_GPIO; i++) { switch (i) { case BGE_APE_LOCK_PHY0: case BGE_APE_LOCK_PHY1: case BGE_APE_LOCK_PHY2: case BGE_APE_LOCK_PHY3: bit = BGE_APE_LOCK_GRANT_DRIVER0; break; default: if (sc->bge_func_addr == 0) bit = BGE_APE_LOCK_GRANT_DRIVER0; else bit = (1 << sc->bge_func_addr); } APE_WRITE_4(sc, regbase + 4 * i, bit); } /* Select the PHY lock based on the device's function number. */ switch (sc->bge_func_addr) { case 0: sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY0; break; case 1: sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY1; break; case 2: sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY2; break; case 3: sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY3; break; default: device_printf(sc->bge_dev, "PHY lock not supported on this function\n"); } } /* * Check for APE firmware, set flags, and print version info. */ static void bge_ape_read_fw_ver(struct bge_softc *sc) { const char *fwtype; uint32_t apedata, features; /* Check for a valid APE signature in shared memory. */ apedata = APE_READ_4(sc, BGE_APE_SEG_SIG); if (apedata != BGE_APE_SEG_SIG_MAGIC) { sc->bge_mfw_flags &= ~ BGE_MFW_ON_APE; return; } /* Check if APE firmware is running. */ apedata = APE_READ_4(sc, BGE_APE_FW_STATUS); if ((apedata & BGE_APE_FW_STATUS_READY) == 0) { device_printf(sc->bge_dev, "APE signature found " "but FW status not ready! 0x%08x\n", apedata); return; } sc->bge_mfw_flags |= BGE_MFW_ON_APE; /* Fetch the APE firwmare type and version. */ apedata = APE_READ_4(sc, BGE_APE_FW_VERSION); features = APE_READ_4(sc, BGE_APE_FW_FEATURES); if ((features & BGE_APE_FW_FEATURE_NCSI) != 0) { sc->bge_mfw_flags |= BGE_MFW_TYPE_NCSI; fwtype = "NCSI"; } else if ((features & BGE_APE_FW_FEATURE_DASH) != 0) { sc->bge_mfw_flags |= BGE_MFW_TYPE_DASH; fwtype = "DASH"; } else fwtype = "UNKN"; /* Print the APE firmware version. */ device_printf(sc->bge_dev, "APE FW version: %s v%d.%d.%d.%d\n", fwtype, (apedata & BGE_APE_FW_VERSION_MAJMSK) >> BGE_APE_FW_VERSION_MAJSFT, (apedata & BGE_APE_FW_VERSION_MINMSK) >> BGE_APE_FW_VERSION_MINSFT, (apedata & BGE_APE_FW_VERSION_REVMSK) >> BGE_APE_FW_VERSION_REVSFT, (apedata & BGE_APE_FW_VERSION_BLDMSK)); } static int bge_ape_lock(struct bge_softc *sc, int locknum) { uint32_t bit, gnt, req, status; int i, off; if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) return (0); /* Lock request/grant registers have different bases. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5761) { req = BGE_APE_LOCK_REQ; gnt = BGE_APE_LOCK_GRANT; } else { req = BGE_APE_PER_LOCK_REQ; gnt = BGE_APE_PER_LOCK_GRANT; } off = 4 * locknum; switch (locknum) { case BGE_APE_LOCK_GPIO: /* Lock required when using GPIO. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5761) return (0); if (sc->bge_func_addr == 0) bit = BGE_APE_LOCK_REQ_DRIVER0; else bit = (1 << sc->bge_func_addr); break; case BGE_APE_LOCK_GRC: /* Lock required to reset the device. */ if (sc->bge_func_addr == 0) bit = BGE_APE_LOCK_REQ_DRIVER0; else bit = (1 << sc->bge_func_addr); break; case BGE_APE_LOCK_MEM: /* Lock required when accessing certain APE memory. */ if (sc->bge_func_addr == 0) bit = BGE_APE_LOCK_REQ_DRIVER0; else bit = (1 << sc->bge_func_addr); break; case BGE_APE_LOCK_PHY0: case BGE_APE_LOCK_PHY1: case BGE_APE_LOCK_PHY2: case BGE_APE_LOCK_PHY3: /* Lock required when accessing PHYs. */ bit = BGE_APE_LOCK_REQ_DRIVER0; break; default: return (EINVAL); } /* Request a lock. */ APE_WRITE_4(sc, req + off, bit); /* Wait up to 1 second to acquire lock. */ for (i = 0; i < 20000; i++) { status = APE_READ_4(sc, gnt + off); if (status == bit) break; DELAY(50); } /* Handle any errors. */ if (status != bit) { device_printf(sc->bge_dev, "APE lock %d request failed! " "request = 0x%04x[0x%04x], status = 0x%04x[0x%04x]\n", locknum, req + off, bit & 0xFFFF, gnt + off, status & 0xFFFF); /* Revoke the lock request. */ APE_WRITE_4(sc, gnt + off, bit); return (EBUSY); } return (0); } static void bge_ape_unlock(struct bge_softc *sc, int locknum) { uint32_t bit, gnt; int off; if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) return; if (sc->bge_asicrev == BGE_ASICREV_BCM5761) gnt = BGE_APE_LOCK_GRANT; else gnt = BGE_APE_PER_LOCK_GRANT; off = 4 * locknum; switch (locknum) { case BGE_APE_LOCK_GPIO: if (sc->bge_asicrev == BGE_ASICREV_BCM5761) return; if (sc->bge_func_addr == 0) bit = BGE_APE_LOCK_GRANT_DRIVER0; else bit = (1 << sc->bge_func_addr); break; case BGE_APE_LOCK_GRC: if (sc->bge_func_addr == 0) bit = BGE_APE_LOCK_GRANT_DRIVER0; else bit = (1 << sc->bge_func_addr); break; case BGE_APE_LOCK_MEM: if (sc->bge_func_addr == 0) bit = BGE_APE_LOCK_GRANT_DRIVER0; else bit = (1 << sc->bge_func_addr); break; case BGE_APE_LOCK_PHY0: case BGE_APE_LOCK_PHY1: case BGE_APE_LOCK_PHY2: case BGE_APE_LOCK_PHY3: bit = BGE_APE_LOCK_GRANT_DRIVER0; break; default: return; } APE_WRITE_4(sc, gnt + off, bit); } /* * Send an event to the APE firmware. */ static void bge_ape_send_event(struct bge_softc *sc, uint32_t event) { uint32_t apedata; int i; /* NCSI does not support APE events. */ if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) return; /* Wait up to 1ms for APE to service previous event. */ for (i = 10; i > 0; i--) { if (bge_ape_lock(sc, BGE_APE_LOCK_MEM) != 0) break; apedata = APE_READ_4(sc, BGE_APE_EVENT_STATUS); if ((apedata & BGE_APE_EVENT_STATUS_EVENT_PENDING) == 0) { APE_WRITE_4(sc, BGE_APE_EVENT_STATUS, event | BGE_APE_EVENT_STATUS_EVENT_PENDING); bge_ape_unlock(sc, BGE_APE_LOCK_MEM); APE_WRITE_4(sc, BGE_APE_EVENT, BGE_APE_EVENT_1); break; } bge_ape_unlock(sc, BGE_APE_LOCK_MEM); DELAY(100); } if (i == 0) device_printf(sc->bge_dev, "APE event 0x%08x send timed out\n", event); } static void bge_ape_driver_state_change(struct bge_softc *sc, int kind) { uint32_t apedata, event; if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) return; switch (kind) { case BGE_RESET_START: /* If this is the first load, clear the load counter. */ apedata = APE_READ_4(sc, BGE_APE_HOST_SEG_SIG); if (apedata != BGE_APE_HOST_SEG_SIG_MAGIC) APE_WRITE_4(sc, BGE_APE_HOST_INIT_COUNT, 0); else { apedata = APE_READ_4(sc, BGE_APE_HOST_INIT_COUNT); APE_WRITE_4(sc, BGE_APE_HOST_INIT_COUNT, ++apedata); } APE_WRITE_4(sc, BGE_APE_HOST_SEG_SIG, BGE_APE_HOST_SEG_SIG_MAGIC); APE_WRITE_4(sc, BGE_APE_HOST_SEG_LEN, BGE_APE_HOST_SEG_LEN_MAGIC); /* Add some version info if bge(4) supports it. */ APE_WRITE_4(sc, BGE_APE_HOST_DRIVER_ID, BGE_APE_HOST_DRIVER_ID_MAGIC(1, 0)); APE_WRITE_4(sc, BGE_APE_HOST_BEHAVIOR, BGE_APE_HOST_BEHAV_NO_PHYLOCK); APE_WRITE_4(sc, BGE_APE_HOST_HEARTBEAT_INT_MS, BGE_APE_HOST_HEARTBEAT_INT_DISABLE); APE_WRITE_4(sc, BGE_APE_HOST_DRVR_STATE, BGE_APE_HOST_DRVR_STATE_START); event = BGE_APE_EVENT_STATUS_STATE_START; break; case BGE_RESET_SHUTDOWN: APE_WRITE_4(sc, BGE_APE_HOST_DRVR_STATE, BGE_APE_HOST_DRVR_STATE_UNLOAD); event = BGE_APE_EVENT_STATUS_STATE_UNLOAD; break; case BGE_RESET_SUSPEND: event = BGE_APE_EVENT_STATUS_STATE_SUSPEND; break; default: return; } bge_ape_send_event(sc, event | BGE_APE_EVENT_STATUS_DRIVER_EVNT | BGE_APE_EVENT_STATUS_STATE_CHNGE); } /* * Map a single buffer address. */ static void bge_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) { struct bge_dmamap_arg *ctx; if (error) return; KASSERT(nseg == 1, ("%s: %d segments returned!", __func__, nseg)); ctx = arg; ctx->bge_busaddr = segs->ds_addr; } static uint8_t bge_nvram_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) { uint32_t access, byte = 0; int i; /* Lock. */ CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); for (i = 0; i < 8000; i++) { if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1) break; DELAY(20); } if (i == 8000) return (1); /* Enable access. */ access = CSR_READ_4(sc, BGE_NVRAM_ACCESS); CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access | BGE_NVRAMACC_ENABLE); CSR_WRITE_4(sc, BGE_NVRAM_ADDR, addr & 0xfffffffc); CSR_WRITE_4(sc, BGE_NVRAM_CMD, BGE_NVRAM_READCMD); for (i = 0; i < BGE_TIMEOUT * 10; i++) { DELAY(10); if (CSR_READ_4(sc, BGE_NVRAM_CMD) & BGE_NVRAMCMD_DONE) { DELAY(10); break; } } if (i == BGE_TIMEOUT * 10) { if_printf(sc->bge_ifp, "nvram read timed out\n"); return (1); } /* Get result. */ byte = CSR_READ_4(sc, BGE_NVRAM_RDDATA); *dest = (bswap32(byte) >> ((addr % 4) * 8)) & 0xFF; /* Disable access. */ CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access); /* Unlock. */ CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_CLR1); CSR_READ_4(sc, BGE_NVRAM_SWARB); return (0); } /* * Read a sequence of bytes from NVRAM. */ static int bge_read_nvram(struct bge_softc *sc, caddr_t dest, int off, int cnt) { int err = 0, i; uint8_t byte = 0; if (sc->bge_asicrev != BGE_ASICREV_BCM5906) return (1); for (i = 0; i < cnt; i++) { err = bge_nvram_getbyte(sc, off + i, &byte); if (err) break; *(dest + i) = byte; } return (err ? 1 : 0); } /* * Read a byte of data stored in the EEPROM at address 'addr.' The * BCM570x supports both the traditional bitbang interface and an * auto access interface for reading the EEPROM. We use the auto * access method. */ static uint8_t bge_eeprom_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) { int i; uint32_t byte = 0; /* * Enable use of auto EEPROM access so we can avoid * having to use the bitbang method. */ BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM); /* Reset the EEPROM, load the clock period. */ CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EEADDR_RESET | BGE_EEHALFCLK(BGE_HALFCLK_384SCL)); DELAY(20); /* Issue the read EEPROM command. */ CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr); /* Wait for completion */ for(i = 0; i < BGE_TIMEOUT * 10; i++) { DELAY(10); if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE) break; } if (i == BGE_TIMEOUT * 10) { device_printf(sc->bge_dev, "EEPROM read timed out\n"); return (1); } /* Get result. */ byte = CSR_READ_4(sc, BGE_EE_DATA); *dest = (byte >> ((addr % 4) * 8)) & 0xFF; return (0); } /* * Read a sequence of bytes from the EEPROM. */ static int bge_read_eeprom(struct bge_softc *sc, caddr_t dest, int off, int cnt) { int i, error = 0; uint8_t byte = 0; for (i = 0; i < cnt; i++) { error = bge_eeprom_getbyte(sc, off + i, &byte); if (error) break; *(dest + i) = byte; } return (error ? 1 : 0); } static int bge_miibus_readreg(device_t dev, int phy, int reg) { struct bge_softc *sc; uint32_t val; int i; sc = device_get_softc(dev); if (bge_ape_lock(sc, sc->bge_phy_ape_lock) != 0) return (0); /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */ if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL); DELAY(80); } CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ | BGE_MICOMM_BUSY | BGE_MIPHY(phy) | BGE_MIREG(reg)); /* Poll for the PHY register access to complete. */ for (i = 0; i < BGE_TIMEOUT; i++) { DELAY(10); val = CSR_READ_4(sc, BGE_MI_COMM); if ((val & BGE_MICOMM_BUSY) == 0) { DELAY(5); val = CSR_READ_4(sc, BGE_MI_COMM); break; } } if (i == BGE_TIMEOUT) { device_printf(sc->bge_dev, "PHY read timed out (phy %d, reg %d, val 0x%08x)\n", phy, reg, val); val = 0; } /* Restore the autopoll bit if necessary. */ if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); DELAY(80); } bge_ape_unlock(sc, sc->bge_phy_ape_lock); if (val & BGE_MICOMM_READFAIL) return (0); return (val & 0xFFFF); } static int bge_miibus_writereg(device_t dev, int phy, int reg, int val) { struct bge_softc *sc; int i; sc = device_get_softc(dev); if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && (reg == BRGPHY_MII_1000CTL || reg == BRGPHY_MII_AUXCTL)) return (0); if (bge_ape_lock(sc, sc->bge_phy_ape_lock) != 0) return (0); /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */ if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL); DELAY(80); } CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE | BGE_MICOMM_BUSY | BGE_MIPHY(phy) | BGE_MIREG(reg) | val); for (i = 0; i < BGE_TIMEOUT; i++) { DELAY(10); if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) { DELAY(5); CSR_READ_4(sc, BGE_MI_COMM); /* dummy read */ break; } } /* Restore the autopoll bit if necessary. */ if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); DELAY(80); } bge_ape_unlock(sc, sc->bge_phy_ape_lock); if (i == BGE_TIMEOUT) device_printf(sc->bge_dev, "PHY write timed out (phy %d, reg %d, val 0x%04x)\n", phy, reg, val); return (0); } static void bge_miibus_statchg(device_t dev) { struct bge_softc *sc; struct mii_data *mii; uint32_t mac_mode, rx_mode, tx_mode; sc = device_get_softc(dev); if ((sc->bge_ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) return; mii = device_get_softc(sc->bge_miibus); if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) == (IFM_ACTIVE | IFM_AVALID)) { switch (IFM_SUBTYPE(mii->mii_media_active)) { case IFM_10_T: case IFM_100_TX: sc->bge_link = 1; break; case IFM_1000_T: case IFM_1000_SX: case IFM_2500_SX: if (sc->bge_asicrev != BGE_ASICREV_BCM5906) sc->bge_link = 1; else sc->bge_link = 0; break; default: sc->bge_link = 0; break; } } else sc->bge_link = 0; if (sc->bge_link == 0) return; /* * APE firmware touches these registers to keep the MAC * connected to the outside world. Try to keep the * accesses atomic. */ /* Set the port mode (MII/GMII) to match the link speed. */ mac_mode = CSR_READ_4(sc, BGE_MAC_MODE) & ~(BGE_MACMODE_PORTMODE | BGE_MACMODE_HALF_DUPLEX); tx_mode = CSR_READ_4(sc, BGE_TX_MODE); rx_mode = CSR_READ_4(sc, BGE_RX_MODE); if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T || IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) mac_mode |= BGE_PORTMODE_GMII; else mac_mode |= BGE_PORTMODE_MII; /* Set MAC flow control behavior to match link flow control settings. */ tx_mode &= ~BGE_TXMODE_FLOWCTL_ENABLE; rx_mode &= ~BGE_RXMODE_FLOWCTL_ENABLE; if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) { if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE) != 0) tx_mode |= BGE_TXMODE_FLOWCTL_ENABLE; if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE) != 0) rx_mode |= BGE_RXMODE_FLOWCTL_ENABLE; } else mac_mode |= BGE_MACMODE_HALF_DUPLEX; CSR_WRITE_4(sc, BGE_MAC_MODE, mac_mode); DELAY(40); CSR_WRITE_4(sc, BGE_TX_MODE, tx_mode); CSR_WRITE_4(sc, BGE_RX_MODE, rx_mode); } /* * Intialize a standard receive ring descriptor. */ static int bge_newbuf_std(struct bge_softc *sc, int i) { struct mbuf *m; struct bge_rx_bd *r; bus_dma_segment_t segs[1]; bus_dmamap_t map; int error, nsegs; if (sc->bge_flags & BGE_FLAG_JUMBO_STD && (sc->bge_ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN))) { m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUM9BYTES); if (m == NULL) return (ENOBUFS); m->m_len = m->m_pkthdr.len = MJUM9BYTES; } else { m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (m == NULL) return (ENOBUFS); m->m_len = m->m_pkthdr.len = MCLBYTES; } if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) m_adj(m, ETHER_ALIGN); error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_sparemap, m, segs, &nsegs, 0); if (error != 0) { m_freem(m); return (error); } if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_dmamap[i]); } map = sc->bge_cdata.bge_rx_std_dmamap[i]; sc->bge_cdata.bge_rx_std_dmamap[i] = sc->bge_cdata.bge_rx_std_sparemap; sc->bge_cdata.bge_rx_std_sparemap = map; sc->bge_cdata.bge_rx_std_chain[i] = m; sc->bge_cdata.bge_rx_std_seglen[i] = segs[0].ds_len; r = &sc->bge_ldata.bge_rx_std_ring[sc->bge_std]; r->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); r->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); r->bge_flags = BGE_RXBDFLAG_END; r->bge_len = segs[0].ds_len; r->bge_idx = i; bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_PREREAD); return (0); } /* * Initialize a jumbo receive ring descriptor. This allocates * a jumbo buffer from the pool managed internally by the driver. */ static int bge_newbuf_jumbo(struct bge_softc *sc, int i) { bus_dma_segment_t segs[BGE_NSEG_JUMBO]; bus_dmamap_t map; struct bge_extrx_bd *r; struct mbuf *m; int error, nsegs; MGETHDR(m, M_NOWAIT, MT_DATA); if (m == NULL) return (ENOBUFS); m_cljget(m, M_NOWAIT, MJUM9BYTES); if (!(m->m_flags & M_EXT)) { m_freem(m); return (ENOBUFS); } m->m_len = m->m_pkthdr.len = MJUM9BYTES; if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) m_adj(m, ETHER_ALIGN); error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_sparemap, m, segs, &nsegs, 0); if (error != 0) { m_freem(m); return (error); } if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_dmamap[i]); } map = sc->bge_cdata.bge_rx_jumbo_dmamap[i]; sc->bge_cdata.bge_rx_jumbo_dmamap[i] = sc->bge_cdata.bge_rx_jumbo_sparemap; sc->bge_cdata.bge_rx_jumbo_sparemap = map; sc->bge_cdata.bge_rx_jumbo_chain[i] = m; sc->bge_cdata.bge_rx_jumbo_seglen[i][0] = 0; sc->bge_cdata.bge_rx_jumbo_seglen[i][1] = 0; sc->bge_cdata.bge_rx_jumbo_seglen[i][2] = 0; sc->bge_cdata.bge_rx_jumbo_seglen[i][3] = 0; /* * Fill in the extended RX buffer descriptor. */ r = &sc->bge_ldata.bge_rx_jumbo_ring[sc->bge_jumbo]; r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; r->bge_idx = i; r->bge_len3 = r->bge_len2 = r->bge_len1 = 0; switch (nsegs) { case 4: r->bge_addr3.bge_addr_lo = BGE_ADDR_LO(segs[3].ds_addr); r->bge_addr3.bge_addr_hi = BGE_ADDR_HI(segs[3].ds_addr); r->bge_len3 = segs[3].ds_len; sc->bge_cdata.bge_rx_jumbo_seglen[i][3] = segs[3].ds_len; case 3: r->bge_addr2.bge_addr_lo = BGE_ADDR_LO(segs[2].ds_addr); r->bge_addr2.bge_addr_hi = BGE_ADDR_HI(segs[2].ds_addr); r->bge_len2 = segs[2].ds_len; sc->bge_cdata.bge_rx_jumbo_seglen[i][2] = segs[2].ds_len; case 2: r->bge_addr1.bge_addr_lo = BGE_ADDR_LO(segs[1].ds_addr); r->bge_addr1.bge_addr_hi = BGE_ADDR_HI(segs[1].ds_addr); r->bge_len1 = segs[1].ds_len; sc->bge_cdata.bge_rx_jumbo_seglen[i][1] = segs[1].ds_len; case 1: r->bge_addr0.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); r->bge_addr0.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); r->bge_len0 = segs[0].ds_len; sc->bge_cdata.bge_rx_jumbo_seglen[i][0] = segs[0].ds_len; break; default: panic("%s: %d segments\n", __func__, nsegs); } bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_PREREAD); return (0); } static int bge_init_rx_ring_std(struct bge_softc *sc) { int error, i; bzero(sc->bge_ldata.bge_rx_std_ring, BGE_STD_RX_RING_SZ); sc->bge_std = 0; for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { if ((error = bge_newbuf_std(sc, i)) != 0) return (error); BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); } bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); sc->bge_std = 0; bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, BGE_STD_RX_RING_CNT - 1); return (0); } static void bge_free_rx_ring_std(struct bge_softc *sc) { int i; for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_dmamap[i]); m_freem(sc->bge_cdata.bge_rx_std_chain[i]); sc->bge_cdata.bge_rx_std_chain[i] = NULL; } bzero((char *)&sc->bge_ldata.bge_rx_std_ring[i], sizeof(struct bge_rx_bd)); } } static int bge_init_rx_ring_jumbo(struct bge_softc *sc) { struct bge_rcb *rcb; int error, i; bzero(sc->bge_ldata.bge_rx_jumbo_ring, BGE_JUMBO_RX_RING_SZ); sc->bge_jumbo = 0; for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { if ((error = bge_newbuf_jumbo(sc, i)) != 0) return (error); BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); } bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); sc->bge_jumbo = 0; /* Enable the jumbo receive producer ring. */ rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_USE_EXT_RX_BD); CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, BGE_JUMBO_RX_RING_CNT - 1); return (0); } static void bge_free_rx_ring_jumbo(struct bge_softc *sc) { int i; for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_dmamap[i]); m_freem(sc->bge_cdata.bge_rx_jumbo_chain[i]); sc->bge_cdata.bge_rx_jumbo_chain[i] = NULL; } bzero((char *)&sc->bge_ldata.bge_rx_jumbo_ring[i], sizeof(struct bge_extrx_bd)); } } static void bge_free_tx_ring(struct bge_softc *sc) { int i; if (sc->bge_ldata.bge_tx_ring == NULL) return; for (i = 0; i < BGE_TX_RING_CNT; i++) { if (sc->bge_cdata.bge_tx_chain[i] != NULL) { bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, sc->bge_cdata.bge_tx_dmamap[i], BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, sc->bge_cdata.bge_tx_dmamap[i]); m_freem(sc->bge_cdata.bge_tx_chain[i]); sc->bge_cdata.bge_tx_chain[i] = NULL; } bzero((char *)&sc->bge_ldata.bge_tx_ring[i], sizeof(struct bge_tx_bd)); } } static int bge_init_tx_ring(struct bge_softc *sc) { sc->bge_txcnt = 0; sc->bge_tx_saved_considx = 0; bzero(sc->bge_ldata.bge_tx_ring, BGE_TX_RING_SZ); bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); /* Initialize transmit producer index for host-memory send ring. */ sc->bge_tx_prodidx = 0; bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); /* 5700 b2 errata */ if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); /* NIC-memory send ring not used; initialize to zero. */ bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); /* 5700 b2 errata */ if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); return (0); } static void bge_setpromisc(struct bge_softc *sc) { struct ifnet *ifp; BGE_LOCK_ASSERT(sc); ifp = sc->bge_ifp; /* Enable or disable promiscuous mode as needed. */ if (ifp->if_flags & IFF_PROMISC) BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); else BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); } static void bge_setmulti(struct bge_softc *sc) { struct ifnet *ifp; struct ifmultiaddr *ifma; uint32_t hashes[4] = { 0, 0, 0, 0 }; int h, i; BGE_LOCK_ASSERT(sc); ifp = sc->bge_ifp; if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { for (i = 0; i < 4; i++) CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF); return; } /* First, zot all the existing filters. */ for (i = 0; i < 4; i++) CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0); /* Now program new ones. */ if_maddr_rlock(ifp); TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; h = ether_crc32_le(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), ETHER_ADDR_LEN) & 0x7F; hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F); } if_maddr_runlock(ifp); for (i = 0; i < 4; i++) CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]); } static void bge_setvlan(struct bge_softc *sc) { struct ifnet *ifp; BGE_LOCK_ASSERT(sc); ifp = sc->bge_ifp; /* Enable or disable VLAN tag stripping as needed. */ if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); else BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); } static void bge_sig_pre_reset(struct bge_softc *sc, int type) { /* * Some chips don't like this so only do this if ASF is enabled */ if (sc->bge_asf_mode) bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { switch (type) { case BGE_RESET_START: bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, BGE_FW_DRV_STATE_START); break; case BGE_RESET_SHUTDOWN: bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, BGE_FW_DRV_STATE_UNLOAD); break; case BGE_RESET_SUSPEND: bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, BGE_FW_DRV_STATE_SUSPEND); break; } } if (type == BGE_RESET_START || type == BGE_RESET_SUSPEND) bge_ape_driver_state_change(sc, type); } static void bge_sig_post_reset(struct bge_softc *sc, int type) { if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { switch (type) { case BGE_RESET_START: bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, BGE_FW_DRV_STATE_START_DONE); /* START DONE */ break; case BGE_RESET_SHUTDOWN: bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, BGE_FW_DRV_STATE_UNLOAD_DONE); break; } } if (type == BGE_RESET_SHUTDOWN) bge_ape_driver_state_change(sc, type); } static void bge_sig_legacy(struct bge_softc *sc, int type) { if (sc->bge_asf_mode) { switch (type) { case BGE_RESET_START: bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, BGE_FW_DRV_STATE_START); break; case BGE_RESET_SHUTDOWN: bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, BGE_FW_DRV_STATE_UNLOAD); break; } } } static void bge_stop_fw(struct bge_softc *sc) { int i; if (sc->bge_asf_mode) { bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, BGE_FW_CMD_PAUSE); CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, CSR_READ_4(sc, BGE_RX_CPU_EVENT) | BGE_RX_CPU_DRV_EVENT); for (i = 0; i < 100; i++ ) { if (!(CSR_READ_4(sc, BGE_RX_CPU_EVENT) & BGE_RX_CPU_DRV_EVENT)) break; DELAY(10); } } } static uint32_t bge_dma_swap_options(struct bge_softc *sc) { uint32_t dma_options; dma_options = BGE_MODECTL_WORDSWAP_NONFRAME | BGE_MODECTL_BYTESWAP_DATA | BGE_MODECTL_WORDSWAP_DATA; #if BYTE_ORDER == BIG_ENDIAN dma_options |= BGE_MODECTL_BYTESWAP_NONFRAME; #endif return (dma_options); } /* * Do endian, PCI and DMA initialization. */ static int bge_chipinit(struct bge_softc *sc) { uint32_t dma_rw_ctl, misc_ctl, mode_ctl; uint16_t val; int i; /* Set endianness before we access any non-PCI registers. */ misc_ctl = BGE_INIT; if (sc->bge_flags & BGE_FLAG_TAGGED_STATUS) misc_ctl |= BGE_PCIMISCCTL_TAGGED_STATUS; pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, misc_ctl, 4); /* * Clear the MAC statistics block in the NIC's * internal memory. */ for (i = BGE_STATS_BLOCK; i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t)) BGE_MEMWIN_WRITE(sc, i, 0); for (i = BGE_STATUS_BLOCK; i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t)) BGE_MEMWIN_WRITE(sc, i, 0); if (sc->bge_chiprev == BGE_CHIPREV_5704_BX) { /* * Fix data corruption caused by non-qword write with WB. * Fix master abort in PCI mode. * Fix PCI latency timer. */ val = pci_read_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, 2); val |= (1 << 10) | (1 << 12) | (1 << 13); pci_write_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, val, 2); } /* * Set up the PCI DMA control register. */ dma_rw_ctl = BGE_PCIDMARWCTL_RD_CMD_SHIFT(6) | BGE_PCIDMARWCTL_WR_CMD_SHIFT(7); if (sc->bge_flags & BGE_FLAG_PCIE) { if (sc->bge_mps >= 256) dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); else dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); } else if (sc->bge_flags & BGE_FLAG_PCIX) { if (BGE_IS_5714_FAMILY(sc)) { /* 256 bytes for read and write. */ dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(2) | BGE_PCIDMARWCTL_WR_WAT_SHIFT(2); dma_rw_ctl |= (sc->bge_asicrev == BGE_ASICREV_BCM5780) ? BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL : BGE_PCIDMARWCTL_ONEDMA_ATONCE_LOCAL; } else if (sc->bge_asicrev == BGE_ASICREV_BCM5703) { /* * In the BCM5703, the DMA read watermark should * be set to less than or equal to the maximum * memory read byte count of the PCI-X command * register. */ dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(4) | BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { /* 1536 bytes for read, 384 bytes for write. */ dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); } else { /* 384 bytes for read and write. */ dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(3) | BGE_PCIDMARWCTL_WR_WAT_SHIFT(3) | 0x0F; } if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || sc->bge_asicrev == BGE_ASICREV_BCM5704) { uint32_t tmp; /* Set ONE_DMA_AT_ONCE for hardware workaround. */ tmp = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; if (tmp == 6 || tmp == 7) dma_rw_ctl |= BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL; /* Set PCI-X DMA write workaround. */ dma_rw_ctl |= BGE_PCIDMARWCTL_ASRT_ALL_BE; } } else { /* Conventional PCI bus: 256 bytes for read and write. */ dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); if (sc->bge_asicrev != BGE_ASICREV_BCM5705 && sc->bge_asicrev != BGE_ASICREV_BCM5750) dma_rw_ctl |= 0x0F; } if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || sc->bge_asicrev == BGE_ASICREV_BCM5701) dma_rw_ctl |= BGE_PCIDMARWCTL_USE_MRM | BGE_PCIDMARWCTL_ASRT_ALL_BE; if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || sc->bge_asicrev == BGE_ASICREV_BCM5704) dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA; if (BGE_IS_5717_PLUS(sc)) { dma_rw_ctl &= ~BGE_PCIDMARWCTL_DIS_CACHE_ALIGNMENT; if (sc->bge_chipid == BGE_CHIPID_BCM57765_A0) dma_rw_ctl &= ~BGE_PCIDMARWCTL_CRDRDR_RDMA_MRRS_MSK; /* * Enable HW workaround for controllers that misinterpret * a status tag update and leave interrupts permanently * disabled. */ if (sc->bge_asicrev != BGE_ASICREV_BCM5717 && sc->bge_asicrev != BGE_ASICREV_BCM57765) dma_rw_ctl |= BGE_PCIDMARWCTL_TAGGED_STATUS_WA; } pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4); /* * Set up general mode register. */ mode_ctl = bge_dma_swap_options(sc); if (sc->bge_asicrev == BGE_ASICREV_BCM5720) { /* Retain Host-2-BMC settings written by APE firmware. */ mode_ctl |= CSR_READ_4(sc, BGE_MODE_CTL) & (BGE_MODECTL_BYTESWAP_B2HRX_DATA | BGE_MODECTL_WORDSWAP_B2HRX_DATA | BGE_MODECTL_B2HRX_ENABLE | BGE_MODECTL_HTX2B_ENABLE); } mode_ctl |= BGE_MODECTL_MAC_ATTN_INTR | BGE_MODECTL_HOST_SEND_BDS | BGE_MODECTL_TX_NO_PHDR_CSUM; /* * BCM5701 B5 have a bug causing data corruption when using * 64-bit DMA reads, which can be terminated early and then * completed later as 32-bit accesses, in combination with * certain bridges. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && sc->bge_chipid == BGE_CHIPID_BCM5701_B5) mode_ctl |= BGE_MODECTL_FORCE_PCI32; /* * Tell the firmware the driver is running */ if (sc->bge_asf_mode & ASF_STACKUP) mode_ctl |= BGE_MODECTL_STACKUP; CSR_WRITE_4(sc, BGE_MODE_CTL, mode_ctl); /* * Disable memory write invalidate. Apparently it is not supported * properly by these devices. Also ensure that INTx isn't disabled, * as these chips need it even when using MSI. */ PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_INTxDIS | PCIM_CMD_MWIEN, 4); /* Set the timer prescaler (always 66 MHz). */ CSR_WRITE_4(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); /* XXX: The Linux tg3 driver does this at the start of brgphy_reset. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { DELAY(40); /* XXX */ /* Put PHY into ready state */ BGE_CLRBIT(sc, BGE_MISC_CFG, BGE_MISCCFG_EPHY_IDDQ); CSR_READ_4(sc, BGE_MISC_CFG); /* Flush */ DELAY(40); } return (0); } static int bge_blockinit(struct bge_softc *sc) { struct bge_rcb *rcb; bus_size_t vrcb; bge_hostaddr taddr; uint32_t dmactl, val; int i, limit; /* * Initialize the memory window pointer register so that * we can access the first 32K of internal NIC RAM. This will * allow us to set up the TX send ring RCBs and the RX return * ring RCBs, plus other things which live in NIC memory. */ CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0); /* Note: the BCM5704 has a smaller mbuf space than other chips. */ if (!(BGE_IS_5705_PLUS(sc))) { /* Configure mbuf memory pool */ CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR, BGE_BUFFPOOL_1); if (sc->bge_asicrev == BGE_ASICREV_BCM5704) CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000); else CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000); /* Configure DMA resource pool */ CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR, BGE_DMA_DESCRIPTORS); CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000); } /* Configure mbuf pool watermarks */ if (BGE_IS_5717_PLUS(sc)) { CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); if (sc->bge_ifp->if_mtu > ETHERMTU) { CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x7e); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xea); } else { CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x2a); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xa0); } } else if (!BGE_IS_5705_PLUS(sc)) { CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); } else if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x04); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x10); } else { CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10); CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); } /* Configure DMA resource watermarks */ CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5); CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10); /* Enable buffer manager */ val = BGE_BMANMODE_ENABLE | BGE_BMANMODE_LOMBUF_ATTN; /* * Change the arbitration algorithm of TXMBUF read request to * round-robin instead of priority based for BCM5719. When * TXFIFO is almost empty, RDMA will hold its request until * TXFIFO is not almost empty. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5719) val |= BGE_BMANMODE_NO_TX_UNDERRUN; CSR_WRITE_4(sc, BGE_BMAN_MODE, val); /* Poll for buffer manager start indication */ for (i = 0; i < BGE_TIMEOUT; i++) { DELAY(10); if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE) break; } if (i == BGE_TIMEOUT) { device_printf(sc->bge_dev, "buffer manager failed to start\n"); return (ENXIO); } /* Enable flow-through queues */ CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); /* Wait until queue initialization is complete */ for (i = 0; i < BGE_TIMEOUT; i++) { DELAY(10); if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0) break; } if (i == BGE_TIMEOUT) { device_printf(sc->bge_dev, "flow-through queue init failed\n"); return (ENXIO); } /* * Summary of rings supported by the controller: * * Standard Receive Producer Ring * - This ring is used to feed receive buffers for "standard" * sized frames (typically 1536 bytes) to the controller. * * Jumbo Receive Producer Ring * - This ring is used to feed receive buffers for jumbo sized * frames (i.e. anything bigger than the "standard" frames) * to the controller. * * Mini Receive Producer Ring * - This ring is used to feed receive buffers for "mini" * sized frames to the controller. * - This feature required external memory for the controller * but was never used in a production system. Should always * be disabled. * * Receive Return Ring * - After the controller has placed an incoming frame into a * receive buffer that buffer is moved into a receive return * ring. The driver is then responsible to passing the * buffer up to the stack. Many versions of the controller * support multiple RR rings. * * Send Ring * - This ring is used for outgoing frames. Many versions of * the controller support multiple send rings. */ /* Initialize the standard receive producer ring control block. */ rcb = &sc->bge_ldata.bge_info.bge_std_rx_rcb; rcb->bge_hostaddr.bge_addr_lo = BGE_ADDR_LO(sc->bge_ldata.bge_rx_std_ring_paddr); rcb->bge_hostaddr.bge_addr_hi = BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr); bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREREAD); if (BGE_IS_5717_PLUS(sc)) { /* * Bits 31-16: Programmable ring size (2048, 1024, 512, .., 32) * Bits 15-2 : Maximum RX frame size * Bit 1 : 1 = Ring Disabled, 0 = Ring ENabled * Bit 0 : Reserved */ rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, BGE_MAX_FRAMELEN << 2); } else if (BGE_IS_5705_PLUS(sc)) { /* * Bits 31-16: Programmable ring size (512, 256, 128, 64, 32) * Bits 15-2 : Reserved (should be 0) * Bit 1 : 1 = Ring Disabled, 0 = Ring Enabled * Bit 0 : Reserved */ rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0); } else { /* * Ring size is always XXX entries * Bits 31-16: Maximum RX frame size * Bits 15-2 : Reserved (should be 0) * Bit 1 : 1 = Ring Disabled, 0 = Ring Enabled * Bit 0 : Reserved */ rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0); } if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || sc->bge_asicrev == BGE_ASICREV_BCM5719 || sc->bge_asicrev == BGE_ASICREV_BCM5720) rcb->bge_nicaddr = BGE_STD_RX_RINGS_5717; else rcb->bge_nicaddr = BGE_STD_RX_RINGS; /* Write the standard receive producer ring control block. */ CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi); CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo); CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr); /* Reset the standard receive producer ring producer index. */ bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, 0); /* * Initialize the jumbo RX producer ring control * block. We set the 'ring disabled' bit in the * flags field until we're actually ready to start * using this ring (i.e. once we set the MTU * high enough to require it). */ if (BGE_IS_JUMBO_CAPABLE(sc)) { rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; /* Get the jumbo receive producer ring RCB parameters. */ rcb->bge_hostaddr.bge_addr_lo = BGE_ADDR_LO(sc->bge_ldata.bge_rx_jumbo_ring_paddr); rcb->bge_hostaddr.bge_addr_hi = BGE_ADDR_HI(sc->bge_ldata.bge_rx_jumbo_ring_paddr); bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREREAD); rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_USE_EXT_RX_BD | BGE_RCB_FLAG_RING_DISABLED); if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || sc->bge_asicrev == BGE_ASICREV_BCM5719 || sc->bge_asicrev == BGE_ASICREV_BCM5720) rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS_5717; else rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS; CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi); CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo); /* Program the jumbo receive producer ring RCB parameters. */ CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr); /* Reset the jumbo receive producer ring producer index. */ bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0); } /* Disable the mini receive producer ring RCB. */ if (BGE_IS_5700_FAMILY(sc)) { rcb = &sc->bge_ldata.bge_info.bge_mini_rx_rcb; rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED); CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); /* Reset the mini receive producer ring producer index. */ bge_writembx(sc, BGE_MBX_RX_MINI_PROD_LO, 0); } /* Choose de-pipeline mode for BCM5906 A0, A1 and A2. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { if (sc->bge_chipid == BGE_CHIPID_BCM5906_A0 || sc->bge_chipid == BGE_CHIPID_BCM5906_A1 || sc->bge_chipid == BGE_CHIPID_BCM5906_A2) CSR_WRITE_4(sc, BGE_ISO_PKT_TX, (CSR_READ_4(sc, BGE_ISO_PKT_TX) & ~3) | 2); } /* * The BD ring replenish thresholds control how often the * hardware fetches new BD's from the producer rings in host * memory. Setting the value too low on a busy system can * starve the hardware and recue the throughpout. * * Set the BD ring replentish thresholds. The recommended * values are 1/8th the number of descriptors allocated to * each ring. * XXX The 5754 requires a lower threshold, so it might be a * requirement of all 575x family chips. The Linux driver sets * the lower threshold for all 5705 family chips as well, but there * are reports that it might not need to be so strict. * * XXX Linux does some extra fiddling here for the 5906 parts as * well. */ if (BGE_IS_5705_PLUS(sc)) val = 8; else val = BGE_STD_RX_RING_CNT / 8; CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val); if (BGE_IS_JUMBO_CAPABLE(sc)) CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH, BGE_JUMBO_RX_RING_CNT/8); if (BGE_IS_5717_PLUS(sc)) { CSR_WRITE_4(sc, BGE_STD_REPLENISH_LWM, 32); CSR_WRITE_4(sc, BGE_JMB_REPLENISH_LWM, 16); } /* * Disable all send rings by setting the 'ring disabled' bit * in the flags field of all the TX send ring control blocks, * located in NIC memory. */ if (!BGE_IS_5705_PLUS(sc)) /* 5700 to 5704 had 16 send rings. */ limit = BGE_TX_RINGS_EXTSSRAM_MAX; else limit = 1; vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; for (i = 0; i < limit; i++) { RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED)); RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); vrcb += sizeof(struct bge_rcb); } /* Configure send ring RCB 0 (we use only the first ring) */ vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr); RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || sc->bge_asicrev == BGE_ASICREV_BCM5719 || sc->bge_asicrev == BGE_ASICREV_BCM5720) RCB_WRITE_4(sc, vrcb, bge_nicaddr, BGE_SEND_RING_5717); else RCB_WRITE_4(sc, vrcb, bge_nicaddr, BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT)); RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0)); /* * Disable all receive return rings by setting the * 'ring diabled' bit in the flags field of all the receive * return ring control blocks, located in NIC memory. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || sc->bge_asicrev == BGE_ASICREV_BCM5719 || sc->bge_asicrev == BGE_ASICREV_BCM5720) { /* Should be 17, use 16 until we get an SRAM map. */ limit = 16; } else if (!BGE_IS_5705_PLUS(sc)) limit = BGE_RX_RINGS_MAX; else if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || BGE_IS_57765_PLUS(sc)) limit = 4; else limit = 1; /* Disable all receive return rings. */ vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; for (i = 0; i < limit; i++) { RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0); RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0); RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, BGE_RCB_FLAG_RING_DISABLED); RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); bge_writembx(sc, BGE_MBX_RX_CONS0_LO + (i * (sizeof(uint64_t))), 0); vrcb += sizeof(struct bge_rcb); } /* * Set up receive return ring 0. Note that the NIC address * for RX return rings is 0x0. The return rings live entirely * within the host, so the nicaddr field in the RCB isn't used. */ vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; BGE_HOSTADDR(taddr, sc->bge_ldata.bge_rx_return_ring_paddr); RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0)); /* Set random backoff seed for TX */ CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF, (IF_LLADDR(sc->bge_ifp)[0] + IF_LLADDR(sc->bge_ifp)[1] + IF_LLADDR(sc->bge_ifp)[2] + IF_LLADDR(sc->bge_ifp)[3] + IF_LLADDR(sc->bge_ifp)[4] + IF_LLADDR(sc->bge_ifp)[5]) & BGE_TX_BACKOFF_SEED_MASK); /* Set inter-packet gap */ val = 0x2620; if (sc->bge_asicrev == BGE_ASICREV_BCM5720) val |= CSR_READ_4(sc, BGE_TX_LENGTHS) & (BGE_TXLEN_JMB_FRM_LEN_MSK | BGE_TXLEN_CNT_DN_VAL_MSK); CSR_WRITE_4(sc, BGE_TX_LENGTHS, val); /* * Specify which ring to use for packets that don't match * any RX rules. */ CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08); /* * Configure number of RX lists. One interrupt distribution * list, sixteen active lists, one bad frames class. */ CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181); /* Inialize RX list placement stats mask. */ CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF); CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1); /* Disable host coalescing until we get it set up */ CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000); /* Poll to make sure it's shut down. */ for (i = 0; i < BGE_TIMEOUT; i++) { DELAY(10); if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE)) break; } if (i == BGE_TIMEOUT) { device_printf(sc->bge_dev, "host coalescing engine failed to idle\n"); return (ENXIO); } /* Set up host coalescing defaults */ CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks); CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks); CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_max_coal_bds); CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_max_coal_bds); if (!(BGE_IS_5705_PLUS(sc))) { CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT, 0); CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT, 0); } CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, 1); CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, 1); /* Set up address of statistics block */ if (!(BGE_IS_5705_PLUS(sc))) { CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI, BGE_ADDR_HI(sc->bge_ldata.bge_stats_paddr)); CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO, BGE_ADDR_LO(sc->bge_ldata.bge_stats_paddr)); CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK); CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK); CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks); } /* Set up address of status block */ CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI, BGE_ADDR_HI(sc->bge_ldata.bge_status_block_paddr)); CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO, BGE_ADDR_LO(sc->bge_ldata.bge_status_block_paddr)); /* Set up status block size. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && sc->bge_chipid != BGE_CHIPID_BCM5700_C0) { val = BGE_STATBLKSZ_FULL; bzero(sc->bge_ldata.bge_status_block, BGE_STATUS_BLK_SZ); } else { val = BGE_STATBLKSZ_32BYTE; bzero(sc->bge_ldata.bge_status_block, 32); } bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); /* Turn on host coalescing state machine */ CSR_WRITE_4(sc, BGE_HCC_MODE, val | BGE_HCCMODE_ENABLE); /* Turn on RX BD completion state machine and enable attentions */ CSR_WRITE_4(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE | BGE_RBDCMODE_ATTN); /* Turn on RX list placement state machine */ CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); /* Turn on RX list selector state machine. */ if (!(BGE_IS_5705_PLUS(sc))) CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); /* Turn on DMA, clear stats. */ val = BGE_MACMODE_TXDMA_ENB | BGE_MACMODE_RXDMA_ENB | BGE_MACMODE_RX_STATS_CLEAR | BGE_MACMODE_TX_STATS_CLEAR | BGE_MACMODE_RX_STATS_ENB | BGE_MACMODE_TX_STATS_ENB | BGE_MACMODE_FRMHDR_DMA_ENB; if (sc->bge_flags & BGE_FLAG_TBI) val |= BGE_PORTMODE_TBI; else if (sc->bge_flags & BGE_FLAG_MII_SERDES) val |= BGE_PORTMODE_GMII; else val |= BGE_PORTMODE_MII; /* Allow APE to send/receive frames. */ if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) val |= BGE_MACMODE_APE_RX_EN | BGE_MACMODE_APE_TX_EN; CSR_WRITE_4(sc, BGE_MAC_MODE, val); DELAY(40); /* Set misc. local control, enable interrupts on attentions */ BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN); #ifdef notdef /* Assert GPIO pins for PHY reset */ BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0 | BGE_MLC_MISCIO_OUT1 | BGE_MLC_MISCIO_OUT2); BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0 | BGE_MLC_MISCIO_OUTEN1 | BGE_MLC_MISCIO_OUTEN2); #endif /* Turn on DMA completion state machine */ if (!(BGE_IS_5705_PLUS(sc))) CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); val = BGE_WDMAMODE_ENABLE | BGE_WDMAMODE_ALL_ATTNS; /* Enable host coalescing bug fix. */ if (BGE_IS_5755_PLUS(sc)) val |= BGE_WDMAMODE_STATUS_TAG_FIX; /* Request larger DMA burst size to get better performance. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5785) val |= BGE_WDMAMODE_BURST_ALL_DATA; /* Turn on write DMA state machine */ CSR_WRITE_4(sc, BGE_WDMA_MODE, val); DELAY(40); /* Turn on read DMA state machine */ val = BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS; if (sc->bge_asicrev == BGE_ASICREV_BCM5717) val |= BGE_RDMAMODE_MULT_DMA_RD_DIS; if (sc->bge_asicrev == BGE_ASICREV_BCM5784 || sc->bge_asicrev == BGE_ASICREV_BCM5785 || sc->bge_asicrev == BGE_ASICREV_BCM57780) val |= BGE_RDMAMODE_BD_SBD_CRPT_ATTN | BGE_RDMAMODE_MBUF_RBD_CRPT_ATTN | BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN; if (sc->bge_flags & BGE_FLAG_PCIE) val |= BGE_RDMAMODE_FIFO_LONG_BURST; if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) { val |= BGE_RDMAMODE_TSO4_ENABLE; if (sc->bge_flags & BGE_FLAG_TSO3 || sc->bge_asicrev == BGE_ASICREV_BCM5785 || sc->bge_asicrev == BGE_ASICREV_BCM57780) val |= BGE_RDMAMODE_TSO6_ENABLE; } if (sc->bge_asicrev == BGE_ASICREV_BCM5720) { val |= CSR_READ_4(sc, BGE_RDMA_MODE) & BGE_RDMAMODE_H2BNC_VLAN_DET; /* * Allow multiple outstanding read requests from * non-LSO read DMA engine. */ val &= ~BGE_RDMAMODE_MULT_DMA_RD_DIS; } if (sc->bge_asicrev == BGE_ASICREV_BCM5761 || sc->bge_asicrev == BGE_ASICREV_BCM5784 || sc->bge_asicrev == BGE_ASICREV_BCM5785 || sc->bge_asicrev == BGE_ASICREV_BCM57780 || BGE_IS_5717_PLUS(sc)) { dmactl = CSR_READ_4(sc, BGE_RDMA_RSRVCTRL); /* * Adjust tx margin to prevent TX data corruption and * fix internal FIFO overflow. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5719 && sc->bge_chipid == BGE_CHIPID_BCM5719_A0) { dmactl &= ~(BGE_RDMA_RSRVCTRL_FIFO_LWM_MASK | BGE_RDMA_RSRVCTRL_FIFO_HWM_MASK | BGE_RDMA_RSRVCTRL_TXMRGN_MASK); dmactl |= BGE_RDMA_RSRVCTRL_FIFO_LWM_1_5K | BGE_RDMA_RSRVCTRL_FIFO_HWM_1_5K | BGE_RDMA_RSRVCTRL_TXMRGN_320B; } /* * Enable fix for read DMA FIFO overruns. * The fix is to limit the number of RX BDs * the hardware would fetch at a fime. */ CSR_WRITE_4(sc, BGE_RDMA_RSRVCTRL, dmactl | BGE_RDMA_RSRVCTRL_FIFO_OFLW_FIX); } if (sc->bge_asicrev == BGE_ASICREV_BCM5719) { CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) | BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_4K | BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); } else if (sc->bge_asicrev == BGE_ASICREV_BCM5720) { /* * Allow 4KB burst length reads for non-LSO frames. * Enable 512B burst length reads for buffer descriptors. */ CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) | BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_512 | BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); } CSR_WRITE_4(sc, BGE_RDMA_MODE, val); DELAY(40); /* Turn on RX data completion state machine */ CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); /* Turn on RX BD initiator state machine */ CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); /* Turn on RX data and RX BD initiator state machine */ CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE); /* Turn on Mbuf cluster free state machine */ if (!(BGE_IS_5705_PLUS(sc))) CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); /* Turn on send BD completion state machine */ CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); /* Turn on send data completion state machine */ val = BGE_SDCMODE_ENABLE; if (sc->bge_asicrev == BGE_ASICREV_BCM5761) val |= BGE_SDCMODE_CDELAY; CSR_WRITE_4(sc, BGE_SDC_MODE, val); /* Turn on send data initiator state machine */ if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE | BGE_SDIMODE_HW_LSO_PRE_DMA); else CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); /* Turn on send BD initiator state machine */ CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); /* Turn on send BD selector state machine */ CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF); CSR_WRITE_4(sc, BGE_SDI_STATS_CTL, BGE_SDISTATSCTL_ENABLE | BGE_SDISTATSCTL_FASTER); /* ack/clear link change events */ CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | BGE_MACSTAT_LINK_CHANGED); CSR_WRITE_4(sc, BGE_MI_STS, 0); /* * Enable attention when the link has changed state for * devices that use auto polling. */ if (sc->bge_flags & BGE_FLAG_TBI) { CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK); } else { if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) { CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); DELAY(80); } if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && sc->bge_chipid != BGE_CHIPID_BCM5700_B2) CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_MI_INTERRUPT); } /* * Clear any pending link state attention. * Otherwise some link state change events may be lost until attention * is cleared by bge_intr() -> bge_link_upd() sequence. * It's not necessary on newer BCM chips - perhaps enabling link * state change attentions implies clearing pending attention. */ CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | BGE_MACSTAT_LINK_CHANGED); /* Enable link state change attentions. */ BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED); return (0); } static const struct bge_revision * bge_lookup_rev(uint32_t chipid) { const struct bge_revision *br; for (br = bge_revisions; br->br_name != NULL; br++) { if (br->br_chipid == chipid) return (br); } for (br = bge_majorrevs; br->br_name != NULL; br++) { if (br->br_chipid == BGE_ASICREV(chipid)) return (br); } return (NULL); } static const struct bge_vendor * bge_lookup_vendor(uint16_t vid) { const struct bge_vendor *v; for (v = bge_vendors; v->v_name != NULL; v++) if (v->v_id == vid) return (v); return (NULL); } static uint32_t bge_chipid(device_t dev) { uint32_t id; id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> BGE_PCIMISCCTL_ASICREV_SHIFT; if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG) { /* * Find the ASCI revision. Different chips use different * registers. */ switch (pci_get_device(dev)) { case BCOM_DEVICEID_BCM5717: case BCOM_DEVICEID_BCM5718: case BCOM_DEVICEID_BCM5719: case BCOM_DEVICEID_BCM5720: id = pci_read_config(dev, BGE_PCI_GEN2_PRODID_ASICREV, 4); break; case BCOM_DEVICEID_BCM57761: case BCOM_DEVICEID_BCM57762: case BCOM_DEVICEID_BCM57765: case BCOM_DEVICEID_BCM57766: case BCOM_DEVICEID_BCM57781: case BCOM_DEVICEID_BCM57785: case BCOM_DEVICEID_BCM57791: case BCOM_DEVICEID_BCM57795: id = pci_read_config(dev, BGE_PCI_GEN15_PRODID_ASICREV, 4); break; default: id = pci_read_config(dev, BGE_PCI_PRODID_ASICREV, 4); } } return (id); } /* * Probe for a Broadcom chip. Check the PCI vendor and device IDs * against our list and return its name if we find a match. * * Note that since the Broadcom controller contains VPD support, we * try to get the device name string from the controller itself instead * of the compiled-in string. It guarantees we'll always announce the * right product name. We fall back to the compiled-in string when * VPD is unavailable or corrupt. */ static int bge_probe(device_t dev) { char buf[96]; char model[64]; const struct bge_revision *br; const char *pname; struct bge_softc *sc; const struct bge_type *t = bge_devs; const struct bge_vendor *v; uint32_t id; uint16_t did, vid; sc = device_get_softc(dev); sc->bge_dev = dev; vid = pci_get_vendor(dev); did = pci_get_device(dev); while(t->bge_vid != 0) { if ((vid == t->bge_vid) && (did == t->bge_did)) { id = bge_chipid(dev); br = bge_lookup_rev(id); if (bge_has_eaddr(sc) && pci_get_vpd_ident(dev, &pname) == 0) snprintf(model, sizeof(model), "%s", pname); else { v = bge_lookup_vendor(vid); snprintf(model, sizeof(model), "%s %s", v != NULL ? v->v_name : "Unknown", br != NULL ? br->br_name : "NetXtreme/NetLink Ethernet Controller"); } snprintf(buf, sizeof(buf), "%s, %sASIC rev. %#08x", model, br != NULL ? "" : "unknown ", id); device_set_desc_copy(dev, buf); return (BUS_PROBE_DEFAULT); } t++; } return (ENXIO); } static void bge_dma_free(struct bge_softc *sc) { int i; /* Destroy DMA maps for RX buffers. */ for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { if (sc->bge_cdata.bge_rx_std_dmamap[i]) bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_dmamap[i]); } if (sc->bge_cdata.bge_rx_std_sparemap) bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, sc->bge_cdata.bge_rx_std_sparemap); /* Destroy DMA maps for jumbo RX buffers. */ for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { if (sc->bge_cdata.bge_rx_jumbo_dmamap[i]) bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_dmamap[i]); } if (sc->bge_cdata.bge_rx_jumbo_sparemap) bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, sc->bge_cdata.bge_rx_jumbo_sparemap); /* Destroy DMA maps for TX buffers. */ for (i = 0; i < BGE_TX_RING_CNT; i++) { if (sc->bge_cdata.bge_tx_dmamap[i]) bus_dmamap_destroy(sc->bge_cdata.bge_tx_mtag, sc->bge_cdata.bge_tx_dmamap[i]); } if (sc->bge_cdata.bge_rx_mtag) bus_dma_tag_destroy(sc->bge_cdata.bge_rx_mtag); if (sc->bge_cdata.bge_mtag_jumbo) bus_dma_tag_destroy(sc->bge_cdata.bge_mtag_jumbo); if (sc->bge_cdata.bge_tx_mtag) bus_dma_tag_destroy(sc->bge_cdata.bge_tx_mtag); /* Destroy standard RX ring. */ if (sc->bge_cdata.bge_rx_std_ring_map) bus_dmamap_unload(sc->bge_cdata.bge_rx_std_ring_tag, sc->bge_cdata.bge_rx_std_ring_map); if (sc->bge_cdata.bge_rx_std_ring_map && sc->bge_ldata.bge_rx_std_ring) bus_dmamem_free(sc->bge_cdata.bge_rx_std_ring_tag, sc->bge_ldata.bge_rx_std_ring, sc->bge_cdata.bge_rx_std_ring_map); if (sc->bge_cdata.bge_rx_std_ring_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_rx_std_ring_tag); /* Destroy jumbo RX ring. */ if (sc->bge_cdata.bge_rx_jumbo_ring_map) bus_dmamap_unload(sc->bge_cdata.bge_rx_jumbo_ring_tag, sc->bge_cdata.bge_rx_jumbo_ring_map); if (sc->bge_cdata.bge_rx_jumbo_ring_map && sc->bge_ldata.bge_rx_jumbo_ring) bus_dmamem_free(sc->bge_cdata.bge_rx_jumbo_ring_tag, sc->bge_ldata.bge_rx_jumbo_ring, sc->bge_cdata.bge_rx_jumbo_ring_map); if (sc->bge_cdata.bge_rx_jumbo_ring_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_rx_jumbo_ring_tag); /* Destroy RX return ring. */ if (sc->bge_cdata.bge_rx_return_ring_map) bus_dmamap_unload(sc->bge_cdata.bge_rx_return_ring_tag, sc->bge_cdata.bge_rx_return_ring_map); if (sc->bge_cdata.bge_rx_return_ring_map && sc->bge_ldata.bge_rx_return_ring) bus_dmamem_free(sc->bge_cdata.bge_rx_return_ring_tag, sc->bge_ldata.bge_rx_return_ring, sc->bge_cdata.bge_rx_return_ring_map); if (sc->bge_cdata.bge_rx_return_ring_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_rx_return_ring_tag); /* Destroy TX ring. */ if (sc->bge_cdata.bge_tx_ring_map) bus_dmamap_unload(sc->bge_cdata.bge_tx_ring_tag, sc->bge_cdata.bge_tx_ring_map); if (sc->bge_cdata.bge_tx_ring_map && sc->bge_ldata.bge_tx_ring) bus_dmamem_free(sc->bge_cdata.bge_tx_ring_tag, sc->bge_ldata.bge_tx_ring, sc->bge_cdata.bge_tx_ring_map); if (sc->bge_cdata.bge_tx_ring_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_tx_ring_tag); /* Destroy status block. */ if (sc->bge_cdata.bge_status_map) bus_dmamap_unload(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map); if (sc->bge_cdata.bge_status_map && sc->bge_ldata.bge_status_block) bus_dmamem_free(sc->bge_cdata.bge_status_tag, sc->bge_ldata.bge_status_block, sc->bge_cdata.bge_status_map); if (sc->bge_cdata.bge_status_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_status_tag); /* Destroy statistics block. */ if (sc->bge_cdata.bge_stats_map) bus_dmamap_unload(sc->bge_cdata.bge_stats_tag, sc->bge_cdata.bge_stats_map); if (sc->bge_cdata.bge_stats_map && sc->bge_ldata.bge_stats) bus_dmamem_free(sc->bge_cdata.bge_stats_tag, sc->bge_ldata.bge_stats, sc->bge_cdata.bge_stats_map); if (sc->bge_cdata.bge_stats_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_stats_tag); if (sc->bge_cdata.bge_buffer_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_buffer_tag); /* Destroy the parent tag. */ if (sc->bge_cdata.bge_parent_tag) bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag); } static int bge_dma_ring_alloc(struct bge_softc *sc, bus_size_t alignment, bus_size_t maxsize, bus_dma_tag_t *tag, uint8_t **ring, bus_dmamap_t *map, bus_addr_t *paddr, const char *msg) { struct bge_dmamap_arg ctx; int error; error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, alignment, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, maxsize, 1, maxsize, 0, NULL, NULL, tag); if (error != 0) { device_printf(sc->bge_dev, "could not create %s dma tag\n", msg); return (ENOMEM); } /* Allocate DMA'able memory for ring. */ error = bus_dmamem_alloc(*tag, (void **)ring, BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, map); if (error != 0) { device_printf(sc->bge_dev, "could not allocate DMA'able memory for %s\n", msg); return (ENOMEM); } /* Load the address of the ring. */ ctx.bge_busaddr = 0; error = bus_dmamap_load(*tag, *map, *ring, maxsize, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); if (error != 0) { device_printf(sc->bge_dev, "could not load DMA'able memory for %s\n", msg); return (ENOMEM); } *paddr = ctx.bge_busaddr; return (0); } static int bge_dma_alloc(struct bge_softc *sc) { bus_addr_t lowaddr; bus_size_t rxmaxsegsz, sbsz, txsegsz, txmaxsegsz; int i, error; lowaddr = BUS_SPACE_MAXADDR; if ((sc->bge_flags & BGE_FLAG_40BIT_BUG) != 0) lowaddr = BGE_DMA_MAXADDR; /* * Allocate the parent bus DMA tag appropriate for PCI. */ error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 1, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL, &sc->bge_cdata.bge_parent_tag); if (error != 0) { device_printf(sc->bge_dev, "could not allocate parent dma tag\n"); return (ENOMEM); } /* Create tag for standard RX ring. */ error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STD_RX_RING_SZ, &sc->bge_cdata.bge_rx_std_ring_tag, (uint8_t **)&sc->bge_ldata.bge_rx_std_ring, &sc->bge_cdata.bge_rx_std_ring_map, &sc->bge_ldata.bge_rx_std_ring_paddr, "RX ring"); if (error) return (error); /* Create tag for RX return ring. */ error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_RX_RTN_RING_SZ(sc), &sc->bge_cdata.bge_rx_return_ring_tag, (uint8_t **)&sc->bge_ldata.bge_rx_return_ring, &sc->bge_cdata.bge_rx_return_ring_map, &sc->bge_ldata.bge_rx_return_ring_paddr, "RX return ring"); if (error) return (error); /* Create tag for TX ring. */ error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_TX_RING_SZ, &sc->bge_cdata.bge_tx_ring_tag, (uint8_t **)&sc->bge_ldata.bge_tx_ring, &sc->bge_cdata.bge_tx_ring_map, &sc->bge_ldata.bge_tx_ring_paddr, "TX ring"); if (error) return (error); /* * Create tag for status block. * Because we only use single Tx/Rx/Rx return ring, use * minimum status block size except BCM5700 AX/BX which * seems to want to see full status block size regardless * of configured number of ring. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && sc->bge_chipid != BGE_CHIPID_BCM5700_C0) sbsz = BGE_STATUS_BLK_SZ; else sbsz = 32; error = bge_dma_ring_alloc(sc, PAGE_SIZE, sbsz, &sc->bge_cdata.bge_status_tag, (uint8_t **)&sc->bge_ldata.bge_status_block, &sc->bge_cdata.bge_status_map, &sc->bge_ldata.bge_status_block_paddr, "status block"); if (error) return (error); /* Create tag for statistics block. */ error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STATS_SZ, &sc->bge_cdata.bge_stats_tag, (uint8_t **)&sc->bge_ldata.bge_stats, &sc->bge_cdata.bge_stats_map, &sc->bge_ldata.bge_stats_paddr, "statistics block"); if (error) return (error); /* Create tag for jumbo RX ring. */ if (BGE_IS_JUMBO_CAPABLE(sc)) { error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_JUMBO_RX_RING_SZ, &sc->bge_cdata.bge_rx_jumbo_ring_tag, (uint8_t **)&sc->bge_ldata.bge_rx_jumbo_ring, &sc->bge_cdata.bge_rx_jumbo_ring_map, &sc->bge_ldata.bge_rx_jumbo_ring_paddr, "jumbo RX ring"); if (error) return (error); } /* Create parent tag for buffers. */ if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0) { /* * XXX * watchdog timeout issue was observed on BCM5704 which * lives behind PCI-X bridge(e.g AMD 8131 PCI-X bridge). * Both limiting DMA address space to 32bits and flushing * mailbox write seem to address the issue. */ if (sc->bge_pcixcap != 0) lowaddr = BUS_SPACE_MAXADDR_32BIT; } error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 1, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL, &sc->bge_cdata.bge_buffer_tag); if (error != 0) { device_printf(sc->bge_dev, "could not allocate buffer dma tag\n"); return (ENOMEM); } /* Create tag for Tx mbufs. */ if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) { txsegsz = BGE_TSOSEG_SZ; txmaxsegsz = 65535 + sizeof(struct ether_vlan_header); } else { txsegsz = MCLBYTES; txmaxsegsz = MCLBYTES * BGE_NSEG_NEW; } error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, txmaxsegsz, BGE_NSEG_NEW, txsegsz, 0, NULL, NULL, &sc->bge_cdata.bge_tx_mtag); if (error) { device_printf(sc->bge_dev, "could not allocate TX dma tag\n"); return (ENOMEM); } /* Create tag for Rx mbufs. */ if (sc->bge_flags & BGE_FLAG_JUMBO_STD) rxmaxsegsz = MJUM9BYTES; else rxmaxsegsz = MCLBYTES; error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, rxmaxsegsz, 1, rxmaxsegsz, 0, NULL, NULL, &sc->bge_cdata.bge_rx_mtag); if (error) { device_printf(sc->bge_dev, "could not allocate RX dma tag\n"); return (ENOMEM); } /* Create DMA maps for RX buffers. */ error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, &sc->bge_cdata.bge_rx_std_sparemap); if (error) { device_printf(sc->bge_dev, "can't create spare DMA map for RX\n"); return (ENOMEM); } for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, &sc->bge_cdata.bge_rx_std_dmamap[i]); if (error) { device_printf(sc->bge_dev, "can't create DMA map for RX\n"); return (ENOMEM); } } /* Create DMA maps for TX buffers. */ for (i = 0; i < BGE_TX_RING_CNT; i++) { error = bus_dmamap_create(sc->bge_cdata.bge_tx_mtag, 0, &sc->bge_cdata.bge_tx_dmamap[i]); if (error) { device_printf(sc->bge_dev, "can't create DMA map for TX\n"); return (ENOMEM); } } /* Create tags for jumbo RX buffers. */ if (BGE_IS_JUMBO_CAPABLE(sc)) { error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MJUM9BYTES, BGE_NSEG_JUMBO, PAGE_SIZE, 0, NULL, NULL, &sc->bge_cdata.bge_mtag_jumbo); if (error) { device_printf(sc->bge_dev, "could not allocate jumbo dma tag\n"); return (ENOMEM); } /* Create DMA maps for jumbo RX buffers. */ error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 0, &sc->bge_cdata.bge_rx_jumbo_sparemap); if (error) { device_printf(sc->bge_dev, "can't create spare DMA map for jumbo RX\n"); return (ENOMEM); } for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 0, &sc->bge_cdata.bge_rx_jumbo_dmamap[i]); if (error) { device_printf(sc->bge_dev, "can't create DMA map for jumbo RX\n"); return (ENOMEM); } } } return (0); } /* * Return true if this device has more than one port. */ static int bge_has_multiple_ports(struct bge_softc *sc) { device_t dev = sc->bge_dev; u_int b, d, f, fscan, s; d = pci_get_domain(dev); b = pci_get_bus(dev); s = pci_get_slot(dev); f = pci_get_function(dev); for (fscan = 0; fscan <= PCI_FUNCMAX; fscan++) if (fscan != f && pci_find_dbsf(d, b, s, fscan) != NULL) return (1); return (0); } /* * Return true if MSI can be used with this device. */ static int bge_can_use_msi(struct bge_softc *sc) { int can_use_msi = 0; if (sc->bge_msi == 0) return (0); /* Disable MSI for polling(4). */ #ifdef DEVICE_POLLING return (0); #endif switch (sc->bge_asicrev) { case BGE_ASICREV_BCM5714_A0: case BGE_ASICREV_BCM5714: /* * Apparently, MSI doesn't work when these chips are * configured in single-port mode. */ if (bge_has_multiple_ports(sc)) can_use_msi = 1; break; case BGE_ASICREV_BCM5750: if (sc->bge_chiprev != BGE_CHIPREV_5750_AX && sc->bge_chiprev != BGE_CHIPREV_5750_BX) can_use_msi = 1; break; default: if (BGE_IS_575X_PLUS(sc)) can_use_msi = 1; } return (can_use_msi); } static int bge_mbox_reorder(struct bge_softc *sc) { /* Lists of PCI bridges that are known to reorder mailbox writes. */ static const struct mbox_reorder { const uint16_t vendor; const uint16_t device; const char *desc; } mbox_reorder_lists[] = { { 0x1022, 0x7450, "AMD-8131 PCI-X Bridge" }, }; devclass_t pci, pcib; device_t bus, dev; int i; pci = devclass_find("pci"); pcib = devclass_find("pcib"); dev = sc->bge_dev; bus = device_get_parent(dev); for (;;) { dev = device_get_parent(bus); bus = device_get_parent(dev); if (device_get_devclass(dev) != pcib) break; for (i = 0; i < nitems(mbox_reorder_lists); i++) { if (pci_get_vendor(dev) == mbox_reorder_lists[i].vendor && pci_get_device(dev) == mbox_reorder_lists[i].device) { device_printf(sc->bge_dev, "enabling MBOX workaround for %s\n", mbox_reorder_lists[i].desc); return (1); } } if (device_get_devclass(bus) != pci) break; } return (0); } static void bge_devinfo(struct bge_softc *sc) { uint32_t cfg, clk; device_printf(sc->bge_dev, "CHIP ID 0x%08x; ASIC REV 0x%02x; CHIP REV 0x%02x; ", sc->bge_chipid, sc->bge_asicrev, sc->bge_chiprev); if (sc->bge_flags & BGE_FLAG_PCIE) printf("PCI-E\n"); else if (sc->bge_flags & BGE_FLAG_PCIX) { printf("PCI-X "); cfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK; if (cfg == BGE_MISCCFG_BOARD_ID_5704CIOBE) clk = 133; else { clk = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; switch (clk) { case 0: clk = 33; break; case 2: clk = 50; break; case 4: clk = 66; break; case 6: clk = 100; break; case 7: clk = 133; break; } } printf("%u MHz\n", clk); } else { if (sc->bge_pcixcap != 0) printf("PCI on PCI-X "); else printf("PCI "); cfg = pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4); if (cfg & BGE_PCISTATE_PCI_BUSSPEED) clk = 66; else clk = 33; if (cfg & BGE_PCISTATE_32BIT_BUS) printf("%u MHz; 32bit\n", clk); else printf("%u MHz; 64bit\n", clk); } } static int bge_attach(device_t dev) { struct ifnet *ifp; struct bge_softc *sc; uint32_t hwcfg = 0, misccfg, pcistate; u_char eaddr[ETHER_ADDR_LEN]; int capmask, error, msicount, reg, rid, trys; sc = device_get_softc(dev); sc->bge_dev = dev; BGE_LOCK_INIT(sc, device_get_nameunit(dev)); TASK_INIT(&sc->bge_intr_task, 0, bge_intr_task, sc); callout_init_mtx(&sc->bge_stat_ch, &sc->bge_mtx, 0); /* * Map control/status registers. */ pci_enable_busmaster(dev); rid = PCIR_BAR(0); sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->bge_res == NULL) { device_printf (sc->bge_dev, "couldn't map BAR0 memory\n"); error = ENXIO; goto fail; } /* Save various chip information. */ sc->bge_func_addr = pci_get_function(dev); sc->bge_chipid = bge_chipid(dev); sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid); sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid); /* Set default PHY address. */ sc->bge_phy_addr = 1; /* * PHY address mapping for various devices. * * | F0 Cu | F0 Sr | F1 Cu | F1 Sr | * ---------+-------+-------+-------+-------+ * BCM57XX | 1 | X | X | X | * BCM5704 | 1 | X | 1 | X | * BCM5717 | 1 | 8 | 2 | 9 | * BCM5719 | 1 | 8 | 2 | 9 | * BCM5720 | 1 | 8 | 2 | 9 | * * | F2 Cu | F2 Sr | F3 Cu | F3 Sr | * ---------+-------+-------+-------+-------+ * BCM57XX | X | X | X | X | * BCM5704 | X | X | X | X | * BCM5717 | X | X | X | X | * BCM5719 | 3 | 10 | 4 | 11 | * BCM5720 | X | X | X | X | * * Other addresses may respond but they are not * IEEE compliant PHYs and should be ignored. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || sc->bge_asicrev == BGE_ASICREV_BCM5719 || sc->bge_asicrev == BGE_ASICREV_BCM5720) { if (sc->bge_chipid != BGE_CHIPID_BCM5717_A0) { if (CSR_READ_4(sc, BGE_SGDIG_STS) & BGE_SGDIGSTS_IS_SERDES) sc->bge_phy_addr = sc->bge_func_addr + 8; else sc->bge_phy_addr = sc->bge_func_addr + 1; } else { if (CSR_READ_4(sc, BGE_CPMU_PHY_STRAP) & BGE_CPMU_PHY_STRAP_IS_SERDES) sc->bge_phy_addr = sc->bge_func_addr + 8; else sc->bge_phy_addr = sc->bge_func_addr + 1; } } if (bge_has_eaddr(sc)) sc->bge_flags |= BGE_FLAG_EADDR; /* Save chipset family. */ switch (sc->bge_asicrev) { case BGE_ASICREV_BCM57765: case BGE_ASICREV_BCM57766: sc->bge_flags |= BGE_FLAG_57765_PLUS; /* FALLTHROUGH */ case BGE_ASICREV_BCM5717: case BGE_ASICREV_BCM5719: case BGE_ASICREV_BCM5720: sc->bge_flags |= BGE_FLAG_5717_PLUS | BGE_FLAG_5755_PLUS | BGE_FLAG_575X_PLUS | BGE_FLAG_5705_PLUS | BGE_FLAG_JUMBO | BGE_FLAG_JUMBO_FRAME; if (sc->bge_asicrev == BGE_ASICREV_BCM5719 && sc->bge_chipid == BGE_CHIPID_BCM5719_A0) { /* Jumbo frame on BCM5719 A0 does not work. */ sc->bge_flags &= ~BGE_FLAG_JUMBO; } break; case BGE_ASICREV_BCM5755: case BGE_ASICREV_BCM5761: case BGE_ASICREV_BCM5784: case BGE_ASICREV_BCM5785: case BGE_ASICREV_BCM5787: case BGE_ASICREV_BCM57780: sc->bge_flags |= BGE_FLAG_5755_PLUS | BGE_FLAG_575X_PLUS | BGE_FLAG_5705_PLUS; break; case BGE_ASICREV_BCM5700: case BGE_ASICREV_BCM5701: case BGE_ASICREV_BCM5703: case BGE_ASICREV_BCM5704: sc->bge_flags |= BGE_FLAG_5700_FAMILY | BGE_FLAG_JUMBO; break; case BGE_ASICREV_BCM5714_A0: case BGE_ASICREV_BCM5780: case BGE_ASICREV_BCM5714: sc->bge_flags |= BGE_FLAG_5714_FAMILY | BGE_FLAG_JUMBO_STD; /* FALLTHROUGH */ case BGE_ASICREV_BCM5750: case BGE_ASICREV_BCM5752: case BGE_ASICREV_BCM5906: sc->bge_flags |= BGE_FLAG_575X_PLUS; /* FALLTHROUGH */ case BGE_ASICREV_BCM5705: sc->bge_flags |= BGE_FLAG_5705_PLUS; break; } /* Identify chips with APE processor. */ switch (sc->bge_asicrev) { case BGE_ASICREV_BCM5717: case BGE_ASICREV_BCM5719: case BGE_ASICREV_BCM5720: case BGE_ASICREV_BCM5761: sc->bge_flags |= BGE_FLAG_APE; break; } /* Chips with APE need BAR2 access for APE registers/memory. */ if ((sc->bge_flags & BGE_FLAG_APE) != 0) { rid = PCIR_BAR(2); sc->bge_res2 = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->bge_res2 == NULL) { device_printf (sc->bge_dev, "couldn't map BAR2 memory\n"); error = ENXIO; goto fail; } /* Enable APE register/memory access by host driver. */ pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4); pcistate |= BGE_PCISTATE_ALLOW_APE_CTLSPC_WR | BGE_PCISTATE_ALLOW_APE_SHMEM_WR | BGE_PCISTATE_ALLOW_APE_PSPACE_WR; pci_write_config(dev, BGE_PCI_PCISTATE, pcistate, 4); bge_ape_lock_init(sc); bge_ape_read_fw_ver(sc); } /* Add SYSCTLs, requires the chipset family to be set. */ bge_add_sysctls(sc); /* Identify the chips that use an CPMU. */ if (BGE_IS_5717_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5784 || sc->bge_asicrev == BGE_ASICREV_BCM5761 || sc->bge_asicrev == BGE_ASICREV_BCM5785 || sc->bge_asicrev == BGE_ASICREV_BCM57780) sc->bge_flags |= BGE_FLAG_CPMU_PRESENT; if ((sc->bge_flags & BGE_FLAG_CPMU_PRESENT) != 0) sc->bge_mi_mode = BGE_MIMODE_500KHZ_CONST; else sc->bge_mi_mode = BGE_MIMODE_BASE; /* Enable auto polling for BCM570[0-5]. */ if (BGE_IS_5700_FAMILY(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5705) sc->bge_mi_mode |= BGE_MIMODE_AUTOPOLL; /* * All Broadcom controllers have 4GB boundary DMA bug. * Whenever an address crosses a multiple of the 4GB boundary * (including 4GB, 8Gb, 12Gb, etc.) and makes the transition * from 0xX_FFFF_FFFF to 0x(X+1)_0000_0000 an internal DMA * state machine will lockup and cause the device to hang. */ sc->bge_flags |= BGE_FLAG_4G_BNDRY_BUG; /* BCM5755 or higher and BCM5906 have short DMA bug. */ if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906) sc->bge_flags |= BGE_FLAG_SHORT_DMA_BUG; /* * BCM5719 cannot handle DMA requests for DMA segments that * have larger than 4KB in size. However the maximum DMA * segment size created in DMA tag is 4KB for TSO, so we * wouldn't encounter the issue here. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5719) sc->bge_flags |= BGE_FLAG_4K_RDMA_BUG; misccfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK; if (sc->bge_asicrev == BGE_ASICREV_BCM5705) { if (misccfg == BGE_MISCCFG_BOARD_ID_5788 || misccfg == BGE_MISCCFG_BOARD_ID_5788M) sc->bge_flags |= BGE_FLAG_5788; } capmask = BMSR_DEFCAPMASK; if ((sc->bge_asicrev == BGE_ASICREV_BCM5703 && (misccfg == 0x4000 || misccfg == 0x8000)) || (sc->bge_asicrev == BGE_ASICREV_BCM5705 && pci_get_vendor(dev) == BCOM_VENDORID && (pci_get_device(dev) == BCOM_DEVICEID_BCM5901 || pci_get_device(dev) == BCOM_DEVICEID_BCM5901A2 || pci_get_device(dev) == BCOM_DEVICEID_BCM5705F)) || (pci_get_vendor(dev) == BCOM_VENDORID && (pci_get_device(dev) == BCOM_DEVICEID_BCM5751F || pci_get_device(dev) == BCOM_DEVICEID_BCM5753F || pci_get_device(dev) == BCOM_DEVICEID_BCM5787F)) || pci_get_device(dev) == BCOM_DEVICEID_BCM57790 || pci_get_device(dev) == BCOM_DEVICEID_BCM57791 || pci_get_device(dev) == BCOM_DEVICEID_BCM57795 || sc->bge_asicrev == BGE_ASICREV_BCM5906) { /* These chips are 10/100 only. */ capmask &= ~BMSR_EXTSTAT; sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; } /* * Some controllers seem to require a special firmware to use * TSO. But the firmware is not available to FreeBSD and Linux * claims that the TSO performed by the firmware is slower than * hardware based TSO. Moreover the firmware based TSO has one * known bug which can't handle TSO if Ethernet header + IP/TCP * header is greater than 80 bytes. A workaround for the TSO * bug exist but it seems it's too expensive than not using * TSO at all. Some hardwares also have the TSO bug so limit * the TSO to the controllers that are not affected TSO issues * (e.g. 5755 or higher). */ if (BGE_IS_5717_PLUS(sc)) { /* BCM5717 requires different TSO configuration. */ sc->bge_flags |= BGE_FLAG_TSO3; if (sc->bge_asicrev == BGE_ASICREV_BCM5719 && sc->bge_chipid == BGE_CHIPID_BCM5719_A0) { /* TSO on BCM5719 A0 does not work. */ sc->bge_flags &= ~BGE_FLAG_TSO3; } } else if (BGE_IS_5755_PLUS(sc)) { /* * BCM5754 and BCM5787 shares the same ASIC id so * explicit device id check is required. * Due to unknown reason TSO does not work on BCM5755M. */ if (pci_get_device(dev) != BCOM_DEVICEID_BCM5754 && pci_get_device(dev) != BCOM_DEVICEID_BCM5754M && pci_get_device(dev) != BCOM_DEVICEID_BCM5755M) sc->bge_flags |= BGE_FLAG_TSO; } /* * Check if this is a PCI-X or PCI Express device. */ if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) { /* * Found a PCI Express capabilities register, this * must be a PCI Express device. */ sc->bge_flags |= BGE_FLAG_PCIE; sc->bge_expcap = reg; /* Extract supported maximum payload size. */ sc->bge_mps = pci_read_config(dev, sc->bge_expcap + PCIER_DEVICE_CAP, 2); sc->bge_mps = 128 << (sc->bge_mps & PCIEM_CAP_MAX_PAYLOAD); if (sc->bge_asicrev == BGE_ASICREV_BCM5719 || sc->bge_asicrev == BGE_ASICREV_BCM5720) sc->bge_expmrq = 2048; else sc->bge_expmrq = 4096; pci_set_max_read_req(dev, sc->bge_expmrq); } else { /* * Check if the device is in PCI-X Mode. * (This bit is not valid on PCI Express controllers.) */ if (pci_find_cap(dev, PCIY_PCIX, ®) == 0) sc->bge_pcixcap = reg; if ((pci_read_config(dev, BGE_PCI_PCISTATE, 4) & BGE_PCISTATE_PCI_BUSMODE) == 0) sc->bge_flags |= BGE_FLAG_PCIX; } /* * The 40bit DMA bug applies to the 5714/5715 controllers and is * not actually a MAC controller bug but an issue with the embedded * PCIe to PCI-X bridge in the device. Use 40bit DMA workaround. */ if (BGE_IS_5714_FAMILY(sc) && (sc->bge_flags & BGE_FLAG_PCIX)) sc->bge_flags |= BGE_FLAG_40BIT_BUG; /* * Some PCI-X bridges are known to trigger write reordering to * the mailbox registers. Typical phenomena is watchdog timeouts * caused by out-of-order TX completions. Enable workaround for * PCI-X devices that live behind these bridges. * Note, PCI-X controllers can run in PCI mode so we can't use * BGE_FLAG_PCIX flag to detect PCI-X controllers. */ if (sc->bge_pcixcap != 0 && bge_mbox_reorder(sc) != 0) sc->bge_flags |= BGE_FLAG_MBOX_REORDER; /* * Allocate the interrupt, using MSI if possible. These devices * support 8 MSI messages, but only the first one is used in * normal operation. */ rid = 0; if (pci_find_cap(sc->bge_dev, PCIY_MSI, ®) == 0) { sc->bge_msicap = reg; if (bge_can_use_msi(sc)) { msicount = pci_msi_count(dev); if (msicount > 1) msicount = 1; } else msicount = 0; if (msicount == 1 && pci_alloc_msi(dev, &msicount) == 0) { rid = 1; sc->bge_flags |= BGE_FLAG_MSI; } } /* * All controllers except BCM5700 supports tagged status but * we use tagged status only for MSI case on BCM5717. Otherwise * MSI on BCM5717 does not work. */ #ifndef DEVICE_POLLING if (sc->bge_flags & BGE_FLAG_MSI && BGE_IS_5717_PLUS(sc)) sc->bge_flags |= BGE_FLAG_TAGGED_STATUS; #endif sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); if (sc->bge_irq == NULL) { device_printf(sc->bge_dev, "couldn't map interrupt\n"); error = ENXIO; goto fail; } bge_devinfo(sc); sc->bge_asf_mode = 0; /* No ASF if APE present. */ if ((sc->bge_flags & BGE_FLAG_APE) == 0) { if (bge_allow_asf && (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == BGE_SRAM_DATA_SIG_MAGIC)) { if (bge_readmem_ind(sc, BGE_SRAM_DATA_CFG) & BGE_HWCFG_ASF) { sc->bge_asf_mode |= ASF_ENABLE; sc->bge_asf_mode |= ASF_STACKUP; if (BGE_IS_575X_PLUS(sc)) sc->bge_asf_mode |= ASF_NEW_HANDSHAKE; } } } bge_stop_fw(sc); bge_sig_pre_reset(sc, BGE_RESET_SHUTDOWN); if (bge_reset(sc)) { device_printf(sc->bge_dev, "chip reset failed\n"); error = ENXIO; goto fail; } bge_sig_legacy(sc, BGE_RESET_SHUTDOWN); bge_sig_post_reset(sc, BGE_RESET_SHUTDOWN); if (bge_chipinit(sc)) { device_printf(sc->bge_dev, "chip initialization failed\n"); error = ENXIO; goto fail; } error = bge_get_eaddr(sc, eaddr); if (error) { device_printf(sc->bge_dev, "failed to read station address\n"); error = ENXIO; goto fail; } /* 5705 limits RX return ring to 512 entries. */ if (BGE_IS_5717_PLUS(sc)) sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; else if (BGE_IS_5705_PLUS(sc)) sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705; else sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; if (bge_dma_alloc(sc)) { device_printf(sc->bge_dev, "failed to allocate DMA resources\n"); error = ENXIO; goto fail; } /* Set default tuneable values. */ sc->bge_stat_ticks = BGE_TICKS_PER_SEC; sc->bge_rx_coal_ticks = 150; sc->bge_tx_coal_ticks = 150; sc->bge_rx_max_coal_bds = 10; sc->bge_tx_max_coal_bds = 10; /* Initialize checksum features to use. */ sc->bge_csum_features = BGE_CSUM_FEATURES; if (sc->bge_forced_udpcsum != 0) sc->bge_csum_features |= CSUM_UDP; /* Set up ifnet structure */ ifp = sc->bge_ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { device_printf(sc->bge_dev, "failed to if_alloc()\n"); error = ENXIO; goto fail; } ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = bge_ioctl; ifp->if_start = bge_start; ifp->if_init = bge_init; ifp->if_snd.ifq_drv_maxlen = BGE_TX_RING_CNT - 1; IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen); IFQ_SET_READY(&ifp->if_snd); ifp->if_hwassist = sc->bge_csum_features; ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU; if ((sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) != 0) { ifp->if_hwassist |= CSUM_TSO; ifp->if_capabilities |= IFCAP_TSO4 | IFCAP_VLAN_HWTSO; } #ifdef IFCAP_VLAN_HWCSUM ifp->if_capabilities |= IFCAP_VLAN_HWCSUM; #endif ifp->if_capenable = ifp->if_capabilities; #ifdef DEVICE_POLLING ifp->if_capabilities |= IFCAP_POLLING; #endif /* * 5700 B0 chips do not support checksumming correctly due * to hardware bugs. */ if (sc->bge_chipid == BGE_CHIPID_BCM5700_B0) { ifp->if_capabilities &= ~IFCAP_HWCSUM; ifp->if_capenable &= ~IFCAP_HWCSUM; ifp->if_hwassist = 0; } /* * Figure out what sort of media we have by checking the * hardware config word in the first 32k of NIC internal memory, * or fall back to examining the EEPROM if necessary. * Note: on some BCM5700 cards, this value appears to be unset. * If that's the case, we have to rely on identifying the NIC * by its PCI subsystem ID, as we do below for the SysKonnect * SK-9D41. */ if (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == BGE_SRAM_DATA_SIG_MAGIC) hwcfg = bge_readmem_ind(sc, BGE_SRAM_DATA_CFG); else if ((sc->bge_flags & BGE_FLAG_EADDR) && (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, sizeof(hwcfg))) { device_printf(sc->bge_dev, "failed to read EEPROM\n"); error = ENXIO; goto fail; } hwcfg = ntohl(hwcfg); } /* The SysKonnect SK-9D41 is a 1000baseSX card. */ if ((pci_read_config(dev, BGE_PCI_SUBSYS, 4) >> 16) == SK_SUBSYSID_9D41 || (hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER) { if (BGE_IS_5705_PLUS(sc)) { sc->bge_flags |= BGE_FLAG_MII_SERDES; sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; } else sc->bge_flags |= BGE_FLAG_TBI; } /* Set various PHY bug flags. */ if (sc->bge_chipid == BGE_CHIPID_BCM5701_A0 || sc->bge_chipid == BGE_CHIPID_BCM5701_B0) sc->bge_phy_flags |= BGE_PHY_CRC_BUG; if (sc->bge_chiprev == BGE_CHIPREV_5703_AX || sc->bge_chiprev == BGE_CHIPREV_5704_AX) sc->bge_phy_flags |= BGE_PHY_ADC_BUG; if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0) sc->bge_phy_flags |= BGE_PHY_5704_A0_BUG; if (pci_get_subvendor(dev) == DELL_VENDORID) sc->bge_phy_flags |= BGE_PHY_NO_3LED; if ((BGE_IS_5705_PLUS(sc)) && sc->bge_asicrev != BGE_ASICREV_BCM5906 && sc->bge_asicrev != BGE_ASICREV_BCM5785 && sc->bge_asicrev != BGE_ASICREV_BCM57780 && !BGE_IS_5717_PLUS(sc)) { if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || sc->bge_asicrev == BGE_ASICREV_BCM5761 || sc->bge_asicrev == BGE_ASICREV_BCM5784 || sc->bge_asicrev == BGE_ASICREV_BCM5787) { if (pci_get_device(dev) != BCOM_DEVICEID_BCM5722 && pci_get_device(dev) != BCOM_DEVICEID_BCM5756) sc->bge_phy_flags |= BGE_PHY_JITTER_BUG; if (pci_get_device(dev) == BCOM_DEVICEID_BCM5755M) sc->bge_phy_flags |= BGE_PHY_ADJUST_TRIM; } else sc->bge_phy_flags |= BGE_PHY_BER_BUG; } /* * Don't enable Ethernet@WireSpeed for the 5700 or the * 5705 A0 and A1 chips. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || (sc->bge_asicrev == BGE_ASICREV_BCM5705 && (sc->bge_chipid != BGE_CHIPID_BCM5705_A0 && sc->bge_chipid != BGE_CHIPID_BCM5705_A1))) sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; if (sc->bge_flags & BGE_FLAG_TBI) { ifmedia_init(&sc->bge_ifmedia, IFM_IMASK, bge_ifmedia_upd, bge_ifmedia_sts); ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX, 0, NULL); ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX | IFM_FDX, 0, NULL); ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL); ifmedia_set(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO); sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media; } else { /* * Do transceiver setup and tell the firmware the * driver is down so we can try to get access the * probe if ASF is running. Retry a couple of times * if we get a conflict with the ASF firmware accessing * the PHY. */ trys = 0; BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); again: bge_asf_driver_up(sc); error = mii_attach(dev, &sc->bge_miibus, ifp, bge_ifmedia_upd, bge_ifmedia_sts, capmask, sc->bge_phy_addr, MII_OFFSET_ANY, MIIF_DOPAUSE); if (error != 0) { if (trys++ < 4) { device_printf(sc->bge_dev, "Try again\n"); bge_miibus_writereg(sc->bge_dev, sc->bge_phy_addr, MII_BMCR, BMCR_RESET); goto again; } device_printf(sc->bge_dev, "attaching PHYs failed\n"); goto fail; } /* * Now tell the firmware we are going up after probing the PHY */ if (sc->bge_asf_mode & ASF_STACKUP) BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); } /* * When using the BCM5701 in PCI-X mode, data corruption has * been observed in the first few bytes of some received packets. * Aligning the packet buffer in memory eliminates the corruption. * Unfortunately, this misaligns the packet payloads. On platforms * which do not support unaligned accesses, we will realign the * payloads by copying the received packets. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && sc->bge_flags & BGE_FLAG_PCIX) sc->bge_flags |= BGE_FLAG_RX_ALIGNBUG; /* * Call MI attach routine. */ ether_ifattach(ifp, eaddr); /* Tell upper layer we support long frames. */ ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); /* * Hookup IRQ last. */ if (BGE_IS_5755_PLUS(sc) && sc->bge_flags & BGE_FLAG_MSI) { /* Take advantage of single-shot MSI. */ CSR_WRITE_4(sc, BGE_MSI_MODE, CSR_READ_4(sc, BGE_MSI_MODE) & ~BGE_MSIMODE_ONE_SHOT_DISABLE); sc->bge_tq = taskqueue_create_fast("bge_taskq", M_WAITOK, taskqueue_thread_enqueue, &sc->bge_tq); if (sc->bge_tq == NULL) { device_printf(dev, "could not create taskqueue.\n"); ether_ifdetach(ifp); error = ENOMEM; goto fail; } error = taskqueue_start_threads(&sc->bge_tq, 1, PI_NET, "%s taskq", device_get_nameunit(sc->bge_dev)); if (error != 0) { device_printf(dev, "could not start threads.\n"); ether_ifdetach(ifp); goto fail; } error = bus_setup_intr(dev, sc->bge_irq, INTR_TYPE_NET | INTR_MPSAFE, bge_msi_intr, NULL, sc, &sc->bge_intrhand); } else error = bus_setup_intr(dev, sc->bge_irq, INTR_TYPE_NET | INTR_MPSAFE, NULL, bge_intr, sc, &sc->bge_intrhand); if (error) { ether_ifdetach(ifp); device_printf(sc->bge_dev, "couldn't set up irq\n"); } fail: if (error) bge_detach(dev); return (error); } static int bge_detach(device_t dev) { struct bge_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); ifp = sc->bge_ifp; #ifdef DEVICE_POLLING if (ifp->if_capenable & IFCAP_POLLING) ether_poll_deregister(ifp); #endif if (device_is_attached(dev)) { ether_ifdetach(ifp); BGE_LOCK(sc); bge_stop(sc); BGE_UNLOCK(sc); callout_drain(&sc->bge_stat_ch); } if (sc->bge_tq) taskqueue_drain(sc->bge_tq, &sc->bge_intr_task); if (sc->bge_flags & BGE_FLAG_TBI) ifmedia_removeall(&sc->bge_ifmedia); else if (sc->bge_miibus != NULL) { bus_generic_detach(dev); device_delete_child(dev, sc->bge_miibus); } bge_release_resources(sc); return (0); } static void bge_release_resources(struct bge_softc *sc) { device_t dev; dev = sc->bge_dev; if (sc->bge_tq != NULL) taskqueue_free(sc->bge_tq); if (sc->bge_intrhand != NULL) bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand); if (sc->bge_irq != NULL) bus_release_resource(dev, SYS_RES_IRQ, sc->bge_flags & BGE_FLAG_MSI ? 1 : 0, sc->bge_irq); if (sc->bge_flags & BGE_FLAG_MSI) pci_release_msi(dev); if (sc->bge_res != NULL) bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(0), sc->bge_res); if (sc->bge_res2 != NULL) bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(2), sc->bge_res2); if (sc->bge_ifp != NULL) if_free(sc->bge_ifp); bge_dma_free(sc); if (mtx_initialized(&sc->bge_mtx)) /* XXX */ BGE_LOCK_DESTROY(sc); } static int bge_reset(struct bge_softc *sc) { device_t dev; uint32_t cachesize, command, mac_mode, mac_mode_mask, reset, val; void (*write_op)(struct bge_softc *, int, int); uint16_t devctl; int i; dev = sc->bge_dev; mac_mode_mask = BGE_MACMODE_HALF_DUPLEX | BGE_MACMODE_PORTMODE; if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) mac_mode_mask |= BGE_MACMODE_APE_RX_EN | BGE_MACMODE_APE_TX_EN; mac_mode = CSR_READ_4(sc, BGE_MAC_MODE) & mac_mode_mask; if (BGE_IS_575X_PLUS(sc) && !BGE_IS_5714_FAMILY(sc) && (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { if (sc->bge_flags & BGE_FLAG_PCIE) write_op = bge_writemem_direct; else write_op = bge_writemem_ind; } else write_op = bge_writereg_ind; if (sc->bge_asicrev != BGE_ASICREV_BCM5700 && sc->bge_asicrev != BGE_ASICREV_BCM5701) { CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); for (i = 0; i < 8000; i++) { if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1) break; DELAY(20); } if (i == 8000) { if (bootverbose) device_printf(dev, "NVRAM lock timedout!\n"); } } /* Take APE lock when performing reset. */ bge_ape_lock(sc, BGE_APE_LOCK_GRC); /* Save some important PCI state. */ cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4); command = pci_read_config(dev, BGE_PCI_CMD, 4); pci_write_config(dev, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); /* Disable fastboot on controllers that support it. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5752 || BGE_IS_5755_PLUS(sc)) { if (bootverbose) device_printf(dev, "Disabling fastboot\n"); CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0); } /* * Write the magic number to SRAM at offset 0xB50. * When firmware finishes its initialization it will * write ~BGE_SRAM_FW_MB_MAGIC to the same location. */ bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); reset = BGE_MISCCFG_RESET_CORE_CLOCKS | BGE_32BITTIME_66MHZ; /* XXX: Broadcom Linux driver. */ if (sc->bge_flags & BGE_FLAG_PCIE) { if (sc->bge_asicrev != BGE_ASICREV_BCM5785 && (sc->bge_flags & BGE_FLAG_5717_PLUS) == 0) { if (CSR_READ_4(sc, 0x7E2C) == 0x60) /* PCIE 1.0 */ CSR_WRITE_4(sc, 0x7E2C, 0x20); } if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { /* Prevent PCIE link training during global reset */ CSR_WRITE_4(sc, BGE_MISC_CFG, 1 << 29); reset |= 1 << 29; } } if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { val = CSR_READ_4(sc, BGE_VCPU_STATUS); CSR_WRITE_4(sc, BGE_VCPU_STATUS, val | BGE_VCPU_STATUS_DRV_RESET); val = CSR_READ_4(sc, BGE_VCPU_EXT_CTRL); CSR_WRITE_4(sc, BGE_VCPU_EXT_CTRL, val & ~BGE_VCPU_EXT_CTRL_HALT_CPU); } /* * Set GPHY Power Down Override to leave GPHY * powered up in D0 uninitialized. */ if (BGE_IS_5705_PLUS(sc) && (sc->bge_flags & BGE_FLAG_CPMU_PRESENT) == 0) reset |= BGE_MISCCFG_GPHY_PD_OVERRIDE; /* Issue global reset */ write_op(sc, BGE_MISC_CFG, reset); if (sc->bge_flags & BGE_FLAG_PCIE) DELAY(100 * 1000); else DELAY(1000); /* XXX: Broadcom Linux driver. */ if (sc->bge_flags & BGE_FLAG_PCIE) { if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) { DELAY(500000); /* wait for link training to complete */ val = pci_read_config(dev, 0xC4, 4); pci_write_config(dev, 0xC4, val | (1 << 15), 4); } devctl = pci_read_config(dev, sc->bge_expcap + PCIER_DEVICE_CTL, 2); /* Clear enable no snoop and disable relaxed ordering. */ devctl &= ~(PCIEM_CTL_RELAXED_ORD_ENABLE | PCIEM_CTL_NOSNOOP_ENABLE); pci_write_config(dev, sc->bge_expcap + PCIER_DEVICE_CTL, devctl, 2); pci_set_max_read_req(dev, sc->bge_expmrq); /* Clear error status. */ pci_write_config(dev, sc->bge_expcap + PCIER_DEVICE_STA, PCIEM_STA_CORRECTABLE_ERROR | PCIEM_STA_NON_FATAL_ERROR | PCIEM_STA_FATAL_ERROR | PCIEM_STA_UNSUPPORTED_REQ, 2); } /* Reset some of the PCI state that got zapped by reset. */ pci_write_config(dev, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); val = BGE_PCISTATE_ROM_ENABLE | BGE_PCISTATE_ROM_RETRY_ENABLE; if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0 && (sc->bge_flags & BGE_FLAG_PCIX) != 0) val |= BGE_PCISTATE_RETRY_SAME_DMA; if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) val |= BGE_PCISTATE_ALLOW_APE_CTLSPC_WR | BGE_PCISTATE_ALLOW_APE_SHMEM_WR | BGE_PCISTATE_ALLOW_APE_PSPACE_WR; pci_write_config(dev, BGE_PCI_PCISTATE, val, 4); pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4); pci_write_config(dev, BGE_PCI_CMD, command, 4); /* * Disable PCI-X relaxed ordering to ensure status block update * comes first then packet buffer DMA. Otherwise driver may * read stale status block. */ if (sc->bge_flags & BGE_FLAG_PCIX) { devctl = pci_read_config(dev, sc->bge_pcixcap + PCIXR_COMMAND, 2); devctl &= ~PCIXM_COMMAND_ERO; if (sc->bge_asicrev == BGE_ASICREV_BCM5703) { devctl &= ~PCIXM_COMMAND_MAX_READ; devctl |= PCIXM_COMMAND_MAX_READ_2048; } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { devctl &= ~(PCIXM_COMMAND_MAX_SPLITS | PCIXM_COMMAND_MAX_READ); devctl |= PCIXM_COMMAND_MAX_READ_2048; } pci_write_config(dev, sc->bge_pcixcap + PCIXR_COMMAND, devctl, 2); } /* Re-enable MSI, if necessary, and enable the memory arbiter. */ if (BGE_IS_5714_FAMILY(sc)) { /* This chip disables MSI on reset. */ if (sc->bge_flags & BGE_FLAG_MSI) { val = pci_read_config(dev, sc->bge_msicap + PCIR_MSI_CTRL, 2); pci_write_config(dev, sc->bge_msicap + PCIR_MSI_CTRL, val | PCIM_MSICTRL_MSI_ENABLE, 2); val = CSR_READ_4(sc, BGE_MSI_MODE); CSR_WRITE_4(sc, BGE_MSI_MODE, val | BGE_MSIMODE_ENABLE); } val = CSR_READ_4(sc, BGE_MARB_MODE); CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | val); } else CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); /* Fix up byte swapping. */ CSR_WRITE_4(sc, BGE_MODE_CTL, bge_dma_swap_options(sc)); val = CSR_READ_4(sc, BGE_MAC_MODE); val = (val & ~mac_mode_mask) | mac_mode; CSR_WRITE_4(sc, BGE_MAC_MODE, val); DELAY(40); bge_ape_unlock(sc, BGE_APE_LOCK_GRC); if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { for (i = 0; i < BGE_TIMEOUT; i++) { val = CSR_READ_4(sc, BGE_VCPU_STATUS); if (val & BGE_VCPU_STATUS_INIT_DONE) break; DELAY(100); } if (i == BGE_TIMEOUT) { device_printf(dev, "reset timed out\n"); return (1); } } else { /* * Poll until we see the 1's complement of the magic number. * This indicates that the firmware initialization is complete. * We expect this to fail if no chip containing the Ethernet * address is fitted though. */ for (i = 0; i < BGE_TIMEOUT; i++) { DELAY(10); val = bge_readmem_ind(sc, BGE_SRAM_FW_MB); if (val == ~BGE_SRAM_FW_MB_MAGIC) break; } if ((sc->bge_flags & BGE_FLAG_EADDR) && i == BGE_TIMEOUT) device_printf(dev, "firmware handshake timed out, found 0x%08x\n", val); /* BCM57765 A0 needs additional time before accessing. */ if (sc->bge_chipid == BGE_CHIPID_BCM57765_A0) DELAY(10 * 1000); /* XXX */ } /* * The 5704 in TBI mode apparently needs some special * adjustment to insure the SERDES drive level is set * to 1.2V. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5704 && sc->bge_flags & BGE_FLAG_TBI) { val = CSR_READ_4(sc, BGE_SERDES_CFG); val = (val & ~0xFFF) | 0x880; CSR_WRITE_4(sc, BGE_SERDES_CFG, val); } /* XXX: Broadcom Linux driver. */ if (sc->bge_flags & BGE_FLAG_PCIE && !BGE_IS_5717_PLUS(sc) && sc->bge_chipid != BGE_CHIPID_BCM5750_A0 && sc->bge_asicrev != BGE_ASICREV_BCM5785) { /* Enable Data FIFO protection. */ val = CSR_READ_4(sc, 0x7C00); CSR_WRITE_4(sc, 0x7C00, val | (1 << 25)); } if (sc->bge_asicrev == BGE_ASICREV_BCM5720) BGE_CLRBIT(sc, BGE_CPMU_CLCK_ORIDE, CPMU_CLCK_ORIDE_MAC_ORIDE_EN); return (0); } static __inline void bge_rxreuse_std(struct bge_softc *sc, int i) { struct bge_rx_bd *r; r = &sc->bge_ldata.bge_rx_std_ring[sc->bge_std]; r->bge_flags = BGE_RXBDFLAG_END; r->bge_len = sc->bge_cdata.bge_rx_std_seglen[i]; r->bge_idx = i; BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); } static __inline void bge_rxreuse_jumbo(struct bge_softc *sc, int i) { struct bge_extrx_bd *r; r = &sc->bge_ldata.bge_rx_jumbo_ring[sc->bge_jumbo]; r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; r->bge_len0 = sc->bge_cdata.bge_rx_jumbo_seglen[i][0]; r->bge_len1 = sc->bge_cdata.bge_rx_jumbo_seglen[i][1]; r->bge_len2 = sc->bge_cdata.bge_rx_jumbo_seglen[i][2]; r->bge_len3 = sc->bge_cdata.bge_rx_jumbo_seglen[i][3]; r->bge_idx = i; BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); } /* * Frame reception handling. This is called if there's a frame * on the receive return list. * * Note: we have to be able to handle two possibilities here: * 1) the frame is from the jumbo receive ring * 2) the frame is from the standard receive ring */ static int bge_rxeof(struct bge_softc *sc, uint16_t rx_prod, int holdlck) { struct ifnet *ifp; int rx_npkts = 0, stdcnt = 0, jumbocnt = 0; uint16_t rx_cons; rx_cons = sc->bge_rx_saved_considx; /* Nothing to do. */ if (rx_cons == rx_prod) return (rx_npkts); ifp = sc->bge_ifp; bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_POSTREAD); bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_POSTWRITE); if (BGE_IS_JUMBO_CAPABLE(sc) && ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN)) bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_POSTWRITE); while (rx_cons != rx_prod) { struct bge_rx_bd *cur_rx; uint32_t rxidx; struct mbuf *m = NULL; uint16_t vlan_tag = 0; int have_tag = 0; #ifdef DEVICE_POLLING if (ifp->if_capenable & IFCAP_POLLING) { if (sc->rxcycles <= 0) break; sc->rxcycles--; } #endif cur_rx = &sc->bge_ldata.bge_rx_return_ring[rx_cons]; rxidx = cur_rx->bge_idx; BGE_INC(rx_cons, sc->bge_return_ring_cnt); if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING && cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) { have_tag = 1; vlan_tag = cur_rx->bge_vlan_tag; } if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) { jumbocnt++; m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx]; if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { bge_rxreuse_jumbo(sc, rxidx); continue; } if (bge_newbuf_jumbo(sc, rxidx) != 0) { bge_rxreuse_jumbo(sc, rxidx); ifp->if_iqdrops++; continue; } BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); } else { stdcnt++; m = sc->bge_cdata.bge_rx_std_chain[rxidx]; if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { bge_rxreuse_std(sc, rxidx); continue; } if (bge_newbuf_std(sc, rxidx) != 0) { bge_rxreuse_std(sc, rxidx); ifp->if_iqdrops++; continue; } BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); } ifp->if_ipackets++; #ifndef __NO_STRICT_ALIGNMENT /* * For architectures with strict alignment we must make sure * the payload is aligned. */ if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) { bcopy(m->m_data, m->m_data + ETHER_ALIGN, cur_rx->bge_len); m->m_data += ETHER_ALIGN; } #endif m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN; m->m_pkthdr.rcvif = ifp; if (ifp->if_capenable & IFCAP_RXCSUM) bge_rxcsum(sc, cur_rx, m); /* * If we received a packet with a vlan tag, * attach that information to the packet. */ if (have_tag) { m->m_pkthdr.ether_vtag = vlan_tag; m->m_flags |= M_VLANTAG; } if (holdlck != 0) { BGE_UNLOCK(sc); (*ifp->if_input)(ifp, m); BGE_LOCK(sc); } else (*ifp->if_input)(ifp, m); rx_npkts++; if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) return (rx_npkts); } bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_PREREAD); if (stdcnt > 0) bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); if (jumbocnt > 0) bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); sc->bge_rx_saved_considx = rx_cons; bge_writembx(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx); if (stdcnt) bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, (sc->bge_std + BGE_STD_RX_RING_CNT - 1) % BGE_STD_RX_RING_CNT); if (jumbocnt) bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, (sc->bge_jumbo + BGE_JUMBO_RX_RING_CNT - 1) % BGE_JUMBO_RX_RING_CNT); #ifdef notyet /* * This register wraps very quickly under heavy packet drops. * If you need correct statistics, you can enable this check. */ if (BGE_IS_5705_PLUS(sc)) ifp->if_ierrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); #endif return (rx_npkts); } static void bge_rxcsum(struct bge_softc *sc, struct bge_rx_bd *cur_rx, struct mbuf *m) { if (BGE_IS_5717_PLUS(sc)) { if ((cur_rx->bge_flags & BGE_RXBDFLAG_IPV6) == 0) { if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; if ((cur_rx->bge_error_flag & BGE_RXERRFLAG_IP_CSUM_NOK) == 0) m->m_pkthdr.csum_flags |= CSUM_IP_VALID; } if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) { m->m_pkthdr.csum_data = cur_rx->bge_tcp_udp_csum; m->m_pkthdr.csum_flags |= CSUM_DATA_VALID | CSUM_PSEUDO_HDR; } } } else { if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; if ((cur_rx->bge_ip_csum ^ 0xFFFF) == 0) m->m_pkthdr.csum_flags |= CSUM_IP_VALID; } if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM && m->m_pkthdr.len >= ETHER_MIN_NOPAD) { m->m_pkthdr.csum_data = cur_rx->bge_tcp_udp_csum; m->m_pkthdr.csum_flags |= CSUM_DATA_VALID | CSUM_PSEUDO_HDR; } } } static void bge_txeof(struct bge_softc *sc, uint16_t tx_cons) { struct bge_tx_bd *cur_tx; struct ifnet *ifp; BGE_LOCK_ASSERT(sc); /* Nothing to do. */ if (sc->bge_tx_saved_considx == tx_cons) return; ifp = sc->bge_ifp; bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_POSTWRITE); /* * Go through our tx ring and free mbufs for those * frames that have been sent. */ while (sc->bge_tx_saved_considx != tx_cons) { uint32_t idx; idx = sc->bge_tx_saved_considx; cur_tx = &sc->bge_ldata.bge_tx_ring[idx]; if (cur_tx->bge_flags & BGE_TXBDFLAG_END) ifp->if_opackets++; if (sc->bge_cdata.bge_tx_chain[idx] != NULL) { bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, sc->bge_cdata.bge_tx_dmamap[idx], BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, sc->bge_cdata.bge_tx_dmamap[idx]); m_freem(sc->bge_cdata.bge_tx_chain[idx]); sc->bge_cdata.bge_tx_chain[idx] = NULL; } sc->bge_txcnt--; BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT); } ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; if (sc->bge_txcnt == 0) sc->bge_timer = 0; } #ifdef DEVICE_POLLING static int bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) { struct bge_softc *sc = ifp->if_softc; uint16_t rx_prod, tx_cons; uint32_t statusword; int rx_npkts = 0; BGE_LOCK(sc); if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { BGE_UNLOCK(sc); return (rx_npkts); } bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); /* Fetch updates from the status block. */ rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; statusword = sc->bge_ldata.bge_status_block->bge_status; /* Clear the status so the next pass only sees the changes. */ sc->bge_ldata.bge_status_block->bge_status = 0; bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); /* Note link event. It will be processed by POLL_AND_CHECK_STATUS. */ if (statusword & BGE_STATFLAG_LINKSTATE_CHANGED) sc->bge_link_evt++; if (cmd == POLL_AND_CHECK_STATUS) if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || sc->bge_link_evt || (sc->bge_flags & BGE_FLAG_TBI)) bge_link_upd(sc); sc->rxcycles = count; rx_npkts = bge_rxeof(sc, rx_prod, 1); if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { BGE_UNLOCK(sc); return (rx_npkts); } bge_txeof(sc, tx_cons); if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) bge_start_locked(ifp); BGE_UNLOCK(sc); return (rx_npkts); } #endif /* DEVICE_POLLING */ static int bge_msi_intr(void *arg) { struct bge_softc *sc; sc = (struct bge_softc *)arg; /* * This interrupt is not shared and controller already * disabled further interrupt. */ taskqueue_enqueue(sc->bge_tq, &sc->bge_intr_task); return (FILTER_HANDLED); } static void bge_intr_task(void *arg, int pending) { struct bge_softc *sc; struct ifnet *ifp; uint32_t status, status_tag; uint16_t rx_prod, tx_cons; sc = (struct bge_softc *)arg; ifp = sc->bge_ifp; BGE_LOCK(sc); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { BGE_UNLOCK(sc); return; } /* Get updated status block. */ bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); /* Save producer/consumer indices. */ rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; status = sc->bge_ldata.bge_status_block->bge_status; status_tag = sc->bge_ldata.bge_status_block->bge_status_tag << 24; /* Dirty the status flag. */ sc->bge_ldata.bge_status_block->bge_status = 0; bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); if ((sc->bge_flags & BGE_FLAG_TAGGED_STATUS) == 0) status_tag = 0; if ((status & BGE_STATFLAG_LINKSTATE_CHANGED) != 0) bge_link_upd(sc); /* Let controller work. */ bge_writembx(sc, BGE_MBX_IRQ0_LO, status_tag); if (ifp->if_drv_flags & IFF_DRV_RUNNING && sc->bge_rx_saved_considx != rx_prod) { /* Check RX return ring producer/consumer. */ BGE_UNLOCK(sc); bge_rxeof(sc, rx_prod, 0); BGE_LOCK(sc); } if (ifp->if_drv_flags & IFF_DRV_RUNNING) { /* Check TX ring producer/consumer. */ bge_txeof(sc, tx_cons); if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) bge_start_locked(ifp); } BGE_UNLOCK(sc); } static void bge_intr(void *xsc) { struct bge_softc *sc; struct ifnet *ifp; uint32_t statusword; uint16_t rx_prod, tx_cons; sc = xsc; BGE_LOCK(sc); ifp = sc->bge_ifp; #ifdef DEVICE_POLLING if (ifp->if_capenable & IFCAP_POLLING) { BGE_UNLOCK(sc); return; } #endif /* * Ack the interrupt by writing something to BGE_MBX_IRQ0_LO. Don't * disable interrupts by writing nonzero like we used to, since with * our current organization this just gives complications and * pessimizations for re-enabling interrupts. We used to have races * instead of the necessary complications. Disabling interrupts * would just reduce the chance of a status update while we are * running (by switching to the interrupt-mode coalescence * parameters), but this chance is already very low so it is more * efficient to get another interrupt than prevent it. * * We do the ack first to ensure another interrupt if there is a * status update after the ack. We don't check for the status * changing later because it is more efficient to get another * interrupt than prevent it, not quite as above (not checking is * a smaller optimization than not toggling the interrupt enable, * since checking doesn't involve PCI accesses and toggling require * the status check). So toggling would probably be a pessimization * even with MSI. It would only be needed for using a task queue. */ bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); /* * Do the mandatory PCI flush as well as get the link status. */ statusword = CSR_READ_4(sc, BGE_MAC_STS) & BGE_MACSTAT_LINK_CHANGED; /* Make sure the descriptor ring indexes are coherent. */ bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; sc->bge_ldata.bge_status_block->bge_status = 0; bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || statusword || sc->bge_link_evt) bge_link_upd(sc); if (ifp->if_drv_flags & IFF_DRV_RUNNING) { /* Check RX return ring producer/consumer. */ bge_rxeof(sc, rx_prod, 1); } if (ifp->if_drv_flags & IFF_DRV_RUNNING) { /* Check TX ring producer/consumer. */ bge_txeof(sc, tx_cons); } if (ifp->if_drv_flags & IFF_DRV_RUNNING && !IFQ_DRV_IS_EMPTY(&ifp->if_snd)) bge_start_locked(ifp); BGE_UNLOCK(sc); } static void bge_asf_driver_up(struct bge_softc *sc) { if (sc->bge_asf_mode & ASF_STACKUP) { /* Send ASF heartbeat aprox. every 2s */ if (sc->bge_asf_count) sc->bge_asf_count --; else { sc->bge_asf_count = 2; bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, BGE_FW_CMD_DRV_ALIVE); bge_writemem_ind(sc, BGE_SRAM_FW_CMD_LEN_MB, 4); bge_writemem_ind(sc, BGE_SRAM_FW_CMD_DATA_MB, BGE_FW_HB_TIMEOUT_SEC); CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, CSR_READ_4(sc, BGE_RX_CPU_EVENT) | BGE_RX_CPU_DRV_EVENT); } } } static void bge_tick(void *xsc) { struct bge_softc *sc = xsc; struct mii_data *mii = NULL; BGE_LOCK_ASSERT(sc); /* Synchronize with possible callout reset/stop. */ if (callout_pending(&sc->bge_stat_ch) || !callout_active(&sc->bge_stat_ch)) return; if (BGE_IS_5705_PLUS(sc)) bge_stats_update_regs(sc); else bge_stats_update(sc); /* XXX Add APE heartbeat check here? */ if ((sc->bge_flags & BGE_FLAG_TBI) == 0) { mii = device_get_softc(sc->bge_miibus); /* * Do not touch PHY if we have link up. This could break * IPMI/ASF mode or produce extra input errors * (extra errors was reported for bcm5701 & bcm5704). */ if (!sc->bge_link) mii_tick(mii); } else { /* * Since in TBI mode auto-polling can't be used we should poll * link status manually. Here we register pending link event * and trigger interrupt. */ #ifdef DEVICE_POLLING /* In polling mode we poll link state in bge_poll(). */ if (!(sc->bge_ifp->if_capenable & IFCAP_POLLING)) #endif { sc->bge_link_evt++; if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || sc->bge_flags & BGE_FLAG_5788) BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); else BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); } } bge_asf_driver_up(sc); bge_watchdog(sc); callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); } static void bge_stats_update_regs(struct bge_softc *sc) { struct ifnet *ifp; struct bge_mac_stats *stats; ifp = sc->bge_ifp; stats = &sc->bge_mac_stats; stats->ifHCOutOctets += CSR_READ_4(sc, BGE_TX_MAC_STATS_OCTETS); stats->etherStatsCollisions += CSR_READ_4(sc, BGE_TX_MAC_STATS_COLLS); stats->outXonSent += CSR_READ_4(sc, BGE_TX_MAC_STATS_XON_SENT); stats->outXoffSent += CSR_READ_4(sc, BGE_TX_MAC_STATS_XOFF_SENT); stats->dot3StatsInternalMacTransmitErrors += CSR_READ_4(sc, BGE_TX_MAC_STATS_ERRORS); stats->dot3StatsSingleCollisionFrames += CSR_READ_4(sc, BGE_TX_MAC_STATS_SINGLE_COLL); stats->dot3StatsMultipleCollisionFrames += CSR_READ_4(sc, BGE_TX_MAC_STATS_MULTI_COLL); stats->dot3StatsDeferredTransmissions += CSR_READ_4(sc, BGE_TX_MAC_STATS_DEFERRED); stats->dot3StatsExcessiveCollisions += CSR_READ_4(sc, BGE_TX_MAC_STATS_EXCESS_COLL); stats->dot3StatsLateCollisions += CSR_READ_4(sc, BGE_TX_MAC_STATS_LATE_COLL); stats->ifHCOutUcastPkts += CSR_READ_4(sc, BGE_TX_MAC_STATS_UCAST); stats->ifHCOutMulticastPkts += CSR_READ_4(sc, BGE_TX_MAC_STATS_MCAST); stats->ifHCOutBroadcastPkts += CSR_READ_4(sc, BGE_TX_MAC_STATS_BCAST); stats->ifHCInOctets += CSR_READ_4(sc, BGE_RX_MAC_STATS_OCTESTS); stats->etherStatsFragments += CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAGMENTS); stats->ifHCInUcastPkts += CSR_READ_4(sc, BGE_RX_MAC_STATS_UCAST); stats->ifHCInMulticastPkts += CSR_READ_4(sc, BGE_RX_MAC_STATS_MCAST); stats->ifHCInBroadcastPkts += CSR_READ_4(sc, BGE_RX_MAC_STATS_BCAST); stats->dot3StatsFCSErrors += CSR_READ_4(sc, BGE_RX_MAC_STATS_FCS_ERRORS); stats->dot3StatsAlignmentErrors += CSR_READ_4(sc, BGE_RX_MAC_STATS_ALGIN_ERRORS); stats->xonPauseFramesReceived += CSR_READ_4(sc, BGE_RX_MAC_STATS_XON_RCVD); stats->xoffPauseFramesReceived += CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_RCVD); stats->macControlFramesReceived += CSR_READ_4(sc, BGE_RX_MAC_STATS_CTRL_RCVD); stats->xoffStateEntered += CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_ENTERED); stats->dot3StatsFramesTooLong += CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAME_TOO_LONG); stats->etherStatsJabbers += CSR_READ_4(sc, BGE_RX_MAC_STATS_JABBERS); stats->etherStatsUndersizePkts += CSR_READ_4(sc, BGE_RX_MAC_STATS_UNDERSIZE); stats->FramesDroppedDueToFilters += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_FILTDROP); stats->DmaWriteQueueFull += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_WRQ_FULL); stats->DmaWriteHighPriQueueFull += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_HPWRQ_FULL); stats->NoMoreRxBDs += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_OUT_OF_BDS); /* * XXX * Unlike other controllers, BGE_RXLP_LOCSTAT_IFIN_DROPS * counter of BCM5717, BCM5718, BCM5719 A0 and BCM5720 A0 * includes number of unwanted multicast frames. This comes * from silicon bug and known workaround to get rough(not * exact) counter is to enable interrupt on MBUF low water * attention. This can be accomplished by setting * BGE_HCCMODE_ATTN bit of BGE_HCC_MODE, * BGE_BMANMODE_LOMBUF_ATTN bit of BGE_BMAN_MODE and * BGE_MODECTL_FLOWCTL_ATTN_INTR bit of BGE_MODE_CTL. * However that change would generate more interrupts and * there are still possibilities of losing multiple frames * during BGE_MODECTL_FLOWCTL_ATTN_INTR interrupt handling. * Given that the workaround still would not get correct * counter I don't think it's worth to implement it. So * ignore reading the counter on controllers that have the * silicon bug. */ if (sc->bge_asicrev != BGE_ASICREV_BCM5717 && sc->bge_chipid != BGE_CHIPID_BCM5719_A0 && sc->bge_chipid != BGE_CHIPID_BCM5720_A0) stats->InputDiscards += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); stats->InputErrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_ERRORS); stats->RecvThresholdHit += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_RXTHRESH_HIT); ifp->if_collisions = (u_long)stats->etherStatsCollisions; ifp->if_ierrors = (u_long)(stats->NoMoreRxBDs + stats->InputDiscards + stats->InputErrors); } static void bge_stats_clear_regs(struct bge_softc *sc) { CSR_READ_4(sc, BGE_TX_MAC_STATS_OCTETS); CSR_READ_4(sc, BGE_TX_MAC_STATS_COLLS); CSR_READ_4(sc, BGE_TX_MAC_STATS_XON_SENT); CSR_READ_4(sc, BGE_TX_MAC_STATS_XOFF_SENT); CSR_READ_4(sc, BGE_TX_MAC_STATS_ERRORS); CSR_READ_4(sc, BGE_TX_MAC_STATS_SINGLE_COLL); CSR_READ_4(sc, BGE_TX_MAC_STATS_MULTI_COLL); CSR_READ_4(sc, BGE_TX_MAC_STATS_DEFERRED); CSR_READ_4(sc, BGE_TX_MAC_STATS_EXCESS_COLL); CSR_READ_4(sc, BGE_TX_MAC_STATS_LATE_COLL); CSR_READ_4(sc, BGE_TX_MAC_STATS_UCAST); CSR_READ_4(sc, BGE_TX_MAC_STATS_MCAST); CSR_READ_4(sc, BGE_TX_MAC_STATS_BCAST); CSR_READ_4(sc, BGE_RX_MAC_STATS_OCTESTS); CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAGMENTS); CSR_READ_4(sc, BGE_RX_MAC_STATS_UCAST); CSR_READ_4(sc, BGE_RX_MAC_STATS_MCAST); CSR_READ_4(sc, BGE_RX_MAC_STATS_BCAST); CSR_READ_4(sc, BGE_RX_MAC_STATS_FCS_ERRORS); CSR_READ_4(sc, BGE_RX_MAC_STATS_ALGIN_ERRORS); CSR_READ_4(sc, BGE_RX_MAC_STATS_XON_RCVD); CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_RCVD); CSR_READ_4(sc, BGE_RX_MAC_STATS_CTRL_RCVD); CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_ENTERED); CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAME_TOO_LONG); CSR_READ_4(sc, BGE_RX_MAC_STATS_JABBERS); CSR_READ_4(sc, BGE_RX_MAC_STATS_UNDERSIZE); CSR_READ_4(sc, BGE_RXLP_LOCSTAT_FILTDROP); CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_WRQ_FULL); CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_HPWRQ_FULL); CSR_READ_4(sc, BGE_RXLP_LOCSTAT_OUT_OF_BDS); CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_ERRORS); CSR_READ_4(sc, BGE_RXLP_LOCSTAT_RXTHRESH_HIT); } static void bge_stats_update(struct bge_softc *sc) { struct ifnet *ifp; bus_size_t stats; uint32_t cnt; /* current register value */ ifp = sc->bge_ifp; stats = BGE_MEMWIN_START + BGE_STATS_BLOCK; #define READ_STAT(sc, stats, stat) \ CSR_READ_4(sc, stats + offsetof(struct bge_stats, stat)) cnt = READ_STAT(sc, stats, txstats.etherStatsCollisions.bge_addr_lo); ifp->if_collisions += (uint32_t)(cnt - sc->bge_tx_collisions); sc->bge_tx_collisions = cnt; cnt = READ_STAT(sc, stats, nicNoMoreRxBDs.bge_addr_lo); ifp->if_ierrors += (uint32_t)(cnt - sc->bge_rx_nobds); sc->bge_rx_nobds = cnt; cnt = READ_STAT(sc, stats, ifInErrors.bge_addr_lo); ifp->if_ierrors += (uint32_t)(cnt - sc->bge_rx_inerrs); sc->bge_rx_inerrs = cnt; cnt = READ_STAT(sc, stats, ifInDiscards.bge_addr_lo); ifp->if_ierrors += (uint32_t)(cnt - sc->bge_rx_discards); sc->bge_rx_discards = cnt; cnt = READ_STAT(sc, stats, txstats.ifOutDiscards.bge_addr_lo); ifp->if_oerrors += (uint32_t)(cnt - sc->bge_tx_discards); sc->bge_tx_discards = cnt; #undef READ_STAT } /* * Pad outbound frame to ETHER_MIN_NOPAD for an unusual reason. * The bge hardware will pad out Tx runts to ETHER_MIN_NOPAD, * but when such padded frames employ the bge IP/TCP checksum offload, * the hardware checksum assist gives incorrect results (possibly * from incorporating its own padding into the UDP/TCP checksum; who knows). * If we pad such runts with zeros, the onboard checksum comes out correct. */ static __inline int bge_cksum_pad(struct mbuf *m) { int padlen = ETHER_MIN_NOPAD - m->m_pkthdr.len; struct mbuf *last; /* If there's only the packet-header and we can pad there, use it. */ if (m->m_pkthdr.len == m->m_len && M_WRITABLE(m) && M_TRAILINGSPACE(m) >= padlen) { last = m; } else { /* * Walk packet chain to find last mbuf. We will either * pad there, or append a new mbuf and pad it. */ for (last = m; last->m_next != NULL; last = last->m_next); if (!(M_WRITABLE(last) && M_TRAILINGSPACE(last) >= padlen)) { /* Allocate new empty mbuf, pad it. Compact later. */ struct mbuf *n; MGET(n, M_NOWAIT, MT_DATA); if (n == NULL) return (ENOBUFS); n->m_len = 0; last->m_next = n; last = n; } } /* Now zero the pad area, to avoid the bge cksum-assist bug. */ memset(mtod(last, caddr_t) + last->m_len, 0, padlen); last->m_len += padlen; m->m_pkthdr.len += padlen; return (0); } static struct mbuf * bge_check_short_dma(struct mbuf *m) { struct mbuf *n; int found; /* * If device receive two back-to-back send BDs with less than * or equal to 8 total bytes then the device may hang. The two * back-to-back send BDs must in the same frame for this failure * to occur. Scan mbuf chains and see whether two back-to-back * send BDs are there. If this is the case, allocate new mbuf * and copy the frame to workaround the silicon bug. */ for (n = m, found = 0; n != NULL; n = n->m_next) { if (n->m_len < 8) { found++; if (found > 1) break; continue; } found = 0; } if (found > 1) { n = m_defrag(m, M_NOWAIT); if (n == NULL) m_freem(m); } else n = m; return (n); } static struct mbuf * bge_setup_tso(struct bge_softc *sc, struct mbuf *m, uint16_t *mss, uint16_t *flags) { struct ip *ip; struct tcphdr *tcp; struct mbuf *n; uint16_t hlen; uint32_t poff; if (M_WRITABLE(m) == 0) { /* Get a writable copy. */ n = m_dup(m, M_NOWAIT); m_freem(m); if (n == NULL) return (NULL); m = n; } m = m_pullup(m, sizeof(struct ether_header) + sizeof(struct ip)); if (m == NULL) return (NULL); ip = (struct ip *)(mtod(m, char *) + sizeof(struct ether_header)); poff = sizeof(struct ether_header) + (ip->ip_hl << 2); m = m_pullup(m, poff + sizeof(struct tcphdr)); if (m == NULL) return (NULL); tcp = (struct tcphdr *)(mtod(m, char *) + poff); m = m_pullup(m, poff + (tcp->th_off << 2)); if (m == NULL) return (NULL); /* * It seems controller doesn't modify IP length and TCP pseudo * checksum. These checksum computed by upper stack should be 0. */ *mss = m->m_pkthdr.tso_segsz; ip = (struct ip *)(mtod(m, char *) + sizeof(struct ether_header)); ip->ip_sum = 0; ip->ip_len = htons(*mss + (ip->ip_hl << 2) + (tcp->th_off << 2)); /* Clear pseudo checksum computed by TCP stack. */ tcp = (struct tcphdr *)(mtod(m, char *) + poff); tcp->th_sum = 0; /* * Broadcom controllers uses different descriptor format for * TSO depending on ASIC revision. Due to TSO-capable firmware * license issue and lower performance of firmware based TSO * we only support hardware based TSO. */ /* Calculate header length, incl. TCP/IP options, in 32 bit units. */ hlen = ((ip->ip_hl << 2) + (tcp->th_off << 2)) >> 2; if (sc->bge_flags & BGE_FLAG_TSO3) { /* * For BCM5717 and newer controllers, hardware based TSO * uses the 14 lower bits of the bge_mss field to store the * MSS and the upper 2 bits to store the lowest 2 bits of * the IP/TCP header length. The upper 6 bits of the header * length are stored in the bge_flags[14:10,4] field. Jumbo * frames are supported. */ *mss |= ((hlen & 0x3) << 14); *flags |= ((hlen & 0xF8) << 7) | ((hlen & 0x4) << 2); } else { /* * For BCM5755 and newer controllers, hardware based TSO uses * the lower 11 bits to store the MSS and the upper 5 bits to * store the IP/TCP header length. Jumbo frames are not * supported. */ *mss |= (hlen << 11); } return (m); } /* * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data * pointers to descriptors. */ static int bge_encap(struct bge_softc *sc, struct mbuf **m_head, uint32_t *txidx) { bus_dma_segment_t segs[BGE_NSEG_NEW]; bus_dmamap_t map; struct bge_tx_bd *d; struct mbuf *m = *m_head; uint32_t idx = *txidx; uint16_t csum_flags, mss, vlan_tag; int nsegs, i, error; csum_flags = 0; mss = 0; vlan_tag = 0; if ((sc->bge_flags & BGE_FLAG_SHORT_DMA_BUG) != 0 && m->m_next != NULL) { *m_head = bge_check_short_dma(m); if (*m_head == NULL) return (ENOBUFS); m = *m_head; } if ((m->m_pkthdr.csum_flags & CSUM_TSO) != 0) { *m_head = m = bge_setup_tso(sc, m, &mss, &csum_flags); if (*m_head == NULL) return (ENOBUFS); csum_flags |= BGE_TXBDFLAG_CPU_PRE_DMA | BGE_TXBDFLAG_CPU_POST_DMA; } else if ((m->m_pkthdr.csum_flags & sc->bge_csum_features) != 0) { if (m->m_pkthdr.csum_flags & CSUM_IP) csum_flags |= BGE_TXBDFLAG_IP_CSUM; if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)) { csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM; if (m->m_pkthdr.len < ETHER_MIN_NOPAD && (error = bge_cksum_pad(m)) != 0) { m_freem(m); *m_head = NULL; return (error); } } } if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0) { if (sc->bge_flags & BGE_FLAG_JUMBO_FRAME && m->m_pkthdr.len > ETHER_MAX_LEN) csum_flags |= BGE_TXBDFLAG_JUMBO_FRAME; if (sc->bge_forced_collapse > 0 && (sc->bge_flags & BGE_FLAG_PCIE) != 0 && m->m_next != NULL) { /* * Forcedly collapse mbuf chains to overcome hardware * limitation which only support a single outstanding * DMA read operation. */ if (sc->bge_forced_collapse == 1) m = m_defrag(m, M_NOWAIT); else m = m_collapse(m, M_NOWAIT, sc->bge_forced_collapse); if (m == NULL) m = *m_head; *m_head = m; } } map = sc->bge_cdata.bge_tx_dmamap[idx]; error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, m, segs, &nsegs, BUS_DMA_NOWAIT); if (error == EFBIG) { m = m_collapse(m, M_NOWAIT, BGE_NSEG_NEW); if (m == NULL) { m_freem(*m_head); *m_head = NULL; return (ENOBUFS); } *m_head = m; error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, m, segs, &nsegs, BUS_DMA_NOWAIT); if (error) { m_freem(m); *m_head = NULL; return (error); } } else if (error != 0) return (error); /* Check if we have enough free send BDs. */ if (sc->bge_txcnt + nsegs >= BGE_TX_RING_CNT) { bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, map); return (ENOBUFS); } bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, map, BUS_DMASYNC_PREWRITE); if (m->m_flags & M_VLANTAG) { csum_flags |= BGE_TXBDFLAG_VLAN_TAG; vlan_tag = m->m_pkthdr.ether_vtag; } for (i = 0; ; i++) { d = &sc->bge_ldata.bge_tx_ring[idx]; d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr); d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr); d->bge_len = segs[i].ds_len; d->bge_flags = csum_flags; d->bge_vlan_tag = vlan_tag; d->bge_mss = mss; if (i == nsegs - 1) break; BGE_INC(idx, BGE_TX_RING_CNT); } /* Mark the last segment as end of packet... */ d->bge_flags |= BGE_TXBDFLAG_END; /* * Insure that the map for this transmission * is placed at the array index of the last descriptor * in this chain. */ sc->bge_cdata.bge_tx_dmamap[*txidx] = sc->bge_cdata.bge_tx_dmamap[idx]; sc->bge_cdata.bge_tx_dmamap[idx] = map; sc->bge_cdata.bge_tx_chain[idx] = m; sc->bge_txcnt += nsegs; BGE_INC(idx, BGE_TX_RING_CNT); *txidx = idx; return (0); } /* * Main transmit routine. To avoid having to do mbuf copies, we put pointers * to the mbuf data regions directly in the transmit descriptors. */ static void bge_start_locked(struct ifnet *ifp) { struct bge_softc *sc; struct mbuf *m_head; uint32_t prodidx; int count; sc = ifp->if_softc; BGE_LOCK_ASSERT(sc); if (!sc->bge_link || (ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != IFF_DRV_RUNNING) return; prodidx = sc->bge_tx_prodidx; for (count = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd);) { if (sc->bge_txcnt > BGE_TX_RING_CNT - 16) { ifp->if_drv_flags |= IFF_DRV_OACTIVE; break; } IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; /* * Pack the data into the transmit ring. If we * don't have room, set the OACTIVE flag and wait * for the NIC to drain the ring. */ if (bge_encap(sc, &m_head, &prodidx)) { if (m_head == NULL) break; IFQ_DRV_PREPEND(&ifp->if_snd, m_head); ifp->if_drv_flags |= IFF_DRV_OACTIVE; break; } ++count; /* * If there's a BPF listener, bounce a copy of this frame * to him. */ #ifdef ETHER_BPF_MTAP ETHER_BPF_MTAP(ifp, m_head); #else BPF_MTAP(ifp, m_head); #endif } if (count > 0) { bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); /* Transmit. */ bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); /* 5700 b2 errata */ if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); sc->bge_tx_prodidx = prodidx; /* * Set a timeout in case the chip goes out to lunch. */ sc->bge_timer = 5; } } /* * Main transmit routine. To avoid having to do mbuf copies, we put pointers * to the mbuf data regions directly in the transmit descriptors. */ static void bge_start(struct ifnet *ifp) { struct bge_softc *sc; sc = ifp->if_softc; BGE_LOCK(sc); bge_start_locked(ifp); BGE_UNLOCK(sc); } static void bge_init_locked(struct bge_softc *sc) { struct ifnet *ifp; uint16_t *m; uint32_t mode; BGE_LOCK_ASSERT(sc); ifp = sc->bge_ifp; if (ifp->if_drv_flags & IFF_DRV_RUNNING) return; /* Cancel pending I/O and flush buffers. */ bge_stop(sc); bge_stop_fw(sc); bge_sig_pre_reset(sc, BGE_RESET_START); bge_reset(sc); bge_sig_legacy(sc, BGE_RESET_START); bge_sig_post_reset(sc, BGE_RESET_START); bge_chipinit(sc); /* * Init the various state machines, ring * control blocks and firmware. */ if (bge_blockinit(sc)) { device_printf(sc->bge_dev, "initialization failure\n"); return; } ifp = sc->bge_ifp; /* Specify MTU. */ CSR_WRITE_4(sc, BGE_RX_MTU, ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + (ifp->if_capenable & IFCAP_VLAN_MTU ? ETHER_VLAN_ENCAP_LEN : 0)); /* Load our MAC address. */ m = (uint16_t *)IF_LLADDR(sc->bge_ifp); CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0])); CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2])); /* Program promiscuous mode. */ bge_setpromisc(sc); /* Program multicast filter. */ bge_setmulti(sc); /* Program VLAN tag stripping. */ bge_setvlan(sc); /* Override UDP checksum offloading. */ if (sc->bge_forced_udpcsum == 0) sc->bge_csum_features &= ~CSUM_UDP; else sc->bge_csum_features |= CSUM_UDP; if (ifp->if_capabilities & IFCAP_TXCSUM && ifp->if_capenable & IFCAP_TXCSUM) { ifp->if_hwassist &= ~(BGE_CSUM_FEATURES | CSUM_UDP); ifp->if_hwassist |= sc->bge_csum_features; } /* Init RX ring. */ if (bge_init_rx_ring_std(sc) != 0) { device_printf(sc->bge_dev, "no memory for std Rx buffers.\n"); bge_stop(sc); return; } /* * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's * memory to insure that the chip has in fact read the first * entry of the ring. */ if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) { uint32_t v, i; for (i = 0; i < 10; i++) { DELAY(20); v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8); if (v == (MCLBYTES - ETHER_ALIGN)) break; } if (i == 10) device_printf (sc->bge_dev, "5705 A0 chip failed to load RX ring\n"); } /* Init jumbo RX ring. */ if (BGE_IS_JUMBO_CAPABLE(sc) && ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN)) { if (bge_init_rx_ring_jumbo(sc) != 0) { device_printf(sc->bge_dev, "no memory for jumbo Rx buffers.\n"); bge_stop(sc); return; } } /* Init our RX return ring index. */ sc->bge_rx_saved_considx = 0; /* Init our RX/TX stat counters. */ sc->bge_rx_discards = sc->bge_tx_discards = sc->bge_tx_collisions = 0; /* Init TX ring. */ bge_init_tx_ring(sc); /* Enable TX MAC state machine lockup fix. */ mode = CSR_READ_4(sc, BGE_TX_MODE); if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906) mode |= BGE_TXMODE_MBUF_LOCKUP_FIX; if (sc->bge_asicrev == BGE_ASICREV_BCM5720) { mode &= ~(BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE); mode |= CSR_READ_4(sc, BGE_TX_MODE) & (BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE); } /* Turn on transmitter. */ CSR_WRITE_4(sc, BGE_TX_MODE, mode | BGE_TXMODE_ENABLE); DELAY(100); /* Turn on receiver. */ mode = CSR_READ_4(sc, BGE_RX_MODE); if (BGE_IS_5755_PLUS(sc)) mode |= BGE_RXMODE_IPV6_ENABLE; CSR_WRITE_4(sc,BGE_RX_MODE, mode | BGE_RXMODE_ENABLE); DELAY(10); /* * Set the number of good frames to receive after RX MBUF * Low Watermark has been reached. After the RX MAC receives * this number of frames, it will drop subsequent incoming * frames until the MBUF High Watermark is reached. */ if (BGE_IS_57765_PLUS(sc)) CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 1); else CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 2); /* Clear MAC statistics. */ if (BGE_IS_5705_PLUS(sc)) bge_stats_clear_regs(sc); /* Tell firmware we're alive. */ BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); #ifdef DEVICE_POLLING /* Disable interrupts if we are polling. */ if (ifp->if_capenable & IFCAP_POLLING) { BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); } else #endif /* Enable host interrupts. */ { BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA); BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); } ifp->if_drv_flags |= IFF_DRV_RUNNING; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; bge_ifmedia_upd_locked(ifp); callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); } static void bge_init(void *xsc) { struct bge_softc *sc = xsc; BGE_LOCK(sc); bge_init_locked(sc); BGE_UNLOCK(sc); } /* * Set media options. */ static int bge_ifmedia_upd(struct ifnet *ifp) { struct bge_softc *sc = ifp->if_softc; int res; BGE_LOCK(sc); res = bge_ifmedia_upd_locked(ifp); BGE_UNLOCK(sc); return (res); } static int bge_ifmedia_upd_locked(struct ifnet *ifp) { struct bge_softc *sc = ifp->if_softc; struct mii_data *mii; struct mii_softc *miisc; struct ifmedia *ifm; BGE_LOCK_ASSERT(sc); ifm = &sc->bge_ifmedia; /* If this is a 1000baseX NIC, enable the TBI port. */ if (sc->bge_flags & BGE_FLAG_TBI) { if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) return (EINVAL); switch(IFM_SUBTYPE(ifm->ifm_media)) { case IFM_AUTO: /* * The BCM5704 ASIC appears to have a special * mechanism for programming the autoneg * advertisement registers in TBI mode. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { uint32_t sgdig; sgdig = CSR_READ_4(sc, BGE_SGDIG_STS); if (sgdig & BGE_SGDIGSTS_DONE) { CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0); sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG); sgdig |= BGE_SGDIGCFG_AUTO | BGE_SGDIGCFG_PAUSE_CAP | BGE_SGDIGCFG_ASYM_PAUSE; CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig | BGE_SGDIGCFG_SEND); DELAY(5); CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig); } } break; case IFM_1000_SX: if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) { BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); } else { BGE_SETBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); } DELAY(40); break; default: return (EINVAL); } return (0); } sc->bge_link_evt++; mii = device_get_softc(sc->bge_miibus); LIST_FOREACH(miisc, &mii->mii_phys, mii_list) PHY_RESET(miisc); mii_mediachg(mii); /* * Force an interrupt so that we will call bge_link_upd * if needed and clear any pending link state attention. * Without this we are not getting any further interrupts * for link state changes and thus will not UP the link and * not be able to send in bge_start_locked. The only * way to get things working was to receive a packet and * get an RX intr. * bge_tick should help for fiber cards and we might not * need to do this here if BGE_FLAG_TBI is set but as * we poll for fiber anyway it should not harm. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || sc->bge_flags & BGE_FLAG_5788) BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); else BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); return (0); } /* * Report current media status. */ static void bge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct bge_softc *sc = ifp->if_softc; struct mii_data *mii; BGE_LOCK(sc); if ((ifp->if_flags & IFF_UP) == 0) { BGE_UNLOCK(sc); return; } if (sc->bge_flags & BGE_FLAG_TBI) { ifmr->ifm_status = IFM_AVALID; ifmr->ifm_active = IFM_ETHER; if (CSR_READ_4(sc, BGE_MAC_STS) & BGE_MACSTAT_TBI_PCS_SYNCHED) ifmr->ifm_status |= IFM_ACTIVE; else { ifmr->ifm_active |= IFM_NONE; BGE_UNLOCK(sc); return; } ifmr->ifm_active |= IFM_1000_SX; if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX) ifmr->ifm_active |= IFM_HDX; else ifmr->ifm_active |= IFM_FDX; BGE_UNLOCK(sc); return; } mii = device_get_softc(sc->bge_miibus); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; BGE_UNLOCK(sc); } static int bge_ioctl(struct ifnet *ifp, u_long command, caddr_t data) { struct bge_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; struct mii_data *mii; int flags, mask, error = 0; switch (command) { case SIOCSIFMTU: if (BGE_IS_JUMBO_CAPABLE(sc) || (sc->bge_flags & BGE_FLAG_JUMBO_STD)) { if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > BGE_JUMBO_MTU) { error = EINVAL; break; } } else if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU) { error = EINVAL; break; } BGE_LOCK(sc); if (ifp->if_mtu != ifr->ifr_mtu) { ifp->if_mtu = ifr->ifr_mtu; if (ifp->if_drv_flags & IFF_DRV_RUNNING) { ifp->if_drv_flags &= ~IFF_DRV_RUNNING; bge_init_locked(sc); } } BGE_UNLOCK(sc); break; case SIOCSIFFLAGS: BGE_LOCK(sc); if (ifp->if_flags & IFF_UP) { /* * If only the state of the PROMISC flag changed, * then just use the 'set promisc mode' command * instead of reinitializing the entire NIC. Doing * a full re-init means reloading the firmware and * waiting for it to start up, which may take a * second or two. Similarly for ALLMULTI. */ if (ifp->if_drv_flags & IFF_DRV_RUNNING) { flags = ifp->if_flags ^ sc->bge_if_flags; if (flags & IFF_PROMISC) bge_setpromisc(sc); if (flags & IFF_ALLMULTI) bge_setmulti(sc); } else bge_init_locked(sc); } else { if (ifp->if_drv_flags & IFF_DRV_RUNNING) { bge_stop(sc); } } sc->bge_if_flags = ifp->if_flags; BGE_UNLOCK(sc); error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: if (ifp->if_drv_flags & IFF_DRV_RUNNING) { BGE_LOCK(sc); bge_setmulti(sc); BGE_UNLOCK(sc); error = 0; } break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: if (sc->bge_flags & BGE_FLAG_TBI) { error = ifmedia_ioctl(ifp, ifr, &sc->bge_ifmedia, command); } else { mii = device_get_softc(sc->bge_miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); } break; case SIOCSIFCAP: mask = ifr->ifr_reqcap ^ ifp->if_capenable; #ifdef DEVICE_POLLING if (mask & IFCAP_POLLING) { if (ifr->ifr_reqcap & IFCAP_POLLING) { error = ether_poll_register(bge_poll, ifp); if (error) return (error); BGE_LOCK(sc); BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); ifp->if_capenable |= IFCAP_POLLING; BGE_UNLOCK(sc); } else { error = ether_poll_deregister(ifp); /* Enable interrupt even in error case */ BGE_LOCK(sc); BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); ifp->if_capenable &= ~IFCAP_POLLING; BGE_UNLOCK(sc); } } #endif if ((mask & IFCAP_TXCSUM) != 0 && (ifp->if_capabilities & IFCAP_TXCSUM) != 0) { ifp->if_capenable ^= IFCAP_TXCSUM; if ((ifp->if_capenable & IFCAP_TXCSUM) != 0) ifp->if_hwassist |= sc->bge_csum_features; else ifp->if_hwassist &= ~sc->bge_csum_features; } if ((mask & IFCAP_RXCSUM) != 0 && (ifp->if_capabilities & IFCAP_RXCSUM) != 0) ifp->if_capenable ^= IFCAP_RXCSUM; if ((mask & IFCAP_TSO4) != 0 && (ifp->if_capabilities & IFCAP_TSO4) != 0) { ifp->if_capenable ^= IFCAP_TSO4; if ((ifp->if_capenable & IFCAP_TSO4) != 0) ifp->if_hwassist |= CSUM_TSO; else ifp->if_hwassist &= ~CSUM_TSO; } if (mask & IFCAP_VLAN_MTU) { ifp->if_capenable ^= IFCAP_VLAN_MTU; ifp->if_drv_flags &= ~IFF_DRV_RUNNING; bge_init(sc); } if ((mask & IFCAP_VLAN_HWTSO) != 0 && (ifp->if_capabilities & IFCAP_VLAN_HWTSO) != 0) ifp->if_capenable ^= IFCAP_VLAN_HWTSO; if ((mask & IFCAP_VLAN_HWTAGGING) != 0 && (ifp->if_capabilities & IFCAP_VLAN_HWTAGGING) != 0) { ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) == 0) ifp->if_capenable &= ~IFCAP_VLAN_HWTSO; BGE_LOCK(sc); bge_setvlan(sc); BGE_UNLOCK(sc); } #ifdef VLAN_CAPABILITIES VLAN_CAPABILITIES(ifp); #endif break; default: error = ether_ioctl(ifp, command, data); break; } return (error); } static void bge_watchdog(struct bge_softc *sc) { struct ifnet *ifp; BGE_LOCK_ASSERT(sc); if (sc->bge_timer == 0 || --sc->bge_timer) return; ifp = sc->bge_ifp; if_printf(ifp, "watchdog timeout -- resetting\n"); ifp->if_drv_flags &= ~IFF_DRV_RUNNING; bge_init_locked(sc); ifp->if_oerrors++; } static void bge_stop_block(struct bge_softc *sc, bus_size_t reg, uint32_t bit) { int i; BGE_CLRBIT(sc, reg, bit); for (i = 0; i < BGE_TIMEOUT; i++) { if ((CSR_READ_4(sc, reg) & bit) == 0) return; DELAY(100); } } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ static void bge_stop(struct bge_softc *sc) { struct ifnet *ifp; BGE_LOCK_ASSERT(sc); ifp = sc->bge_ifp; callout_stop(&sc->bge_stat_ch); /* Disable host interrupts. */ BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); /* * Tell firmware we're shutting down. */ bge_stop_fw(sc); bge_sig_pre_reset(sc, BGE_RESET_SHUTDOWN); /* * Disable all of the receiver blocks. */ bge_stop_block(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); bge_stop_block(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); bge_stop_block(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); if (BGE_IS_5700_FAMILY(sc)) bge_stop_block(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); bge_stop_block(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE); bge_stop_block(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); bge_stop_block(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE); /* * Disable all of the transmit blocks. */ bge_stop_block(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); bge_stop_block(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); bge_stop_block(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); bge_stop_block(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE); bge_stop_block(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); if (BGE_IS_5700_FAMILY(sc)) bge_stop_block(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); bge_stop_block(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); /* * Shut down all of the memory managers and related * state machines. */ bge_stop_block(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); bge_stop_block(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE); if (BGE_IS_5700_FAMILY(sc)) bge_stop_block(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); if (!(BGE_IS_5705_PLUS(sc))) { BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE); BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); } /* Update MAC statistics. */ if (BGE_IS_5705_PLUS(sc)) bge_stats_update_regs(sc); bge_reset(sc); bge_sig_legacy(sc, BGE_RESET_SHUTDOWN); bge_sig_post_reset(sc, BGE_RESET_SHUTDOWN); /* * Keep the ASF firmware running if up. */ if (sc->bge_asf_mode & ASF_STACKUP) BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); else BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); /* Free the RX lists. */ bge_free_rx_ring_std(sc); /* Free jumbo RX list. */ if (BGE_IS_JUMBO_CAPABLE(sc)) bge_free_rx_ring_jumbo(sc); /* Free TX buffers. */ bge_free_tx_ring(sc); sc->bge_tx_saved_considx = BGE_TXCONS_UNSET; /* Clear MAC's link state (PHY may still have link UP). */ if (bootverbose && sc->bge_link) if_printf(sc->bge_ifp, "link DOWN\n"); sc->bge_link = 0; ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); } /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ static int bge_shutdown(device_t dev) { struct bge_softc *sc; sc = device_get_softc(dev); BGE_LOCK(sc); bge_stop(sc); BGE_UNLOCK(sc); return (0); } static int bge_suspend(device_t dev) { struct bge_softc *sc; sc = device_get_softc(dev); BGE_LOCK(sc); bge_stop(sc); BGE_UNLOCK(sc); return (0); } static int bge_resume(device_t dev) { struct bge_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); BGE_LOCK(sc); ifp = sc->bge_ifp; if (ifp->if_flags & IFF_UP) { bge_init_locked(sc); if (ifp->if_drv_flags & IFF_DRV_RUNNING) bge_start_locked(ifp); } BGE_UNLOCK(sc); return (0); } static void bge_link_upd(struct bge_softc *sc) { struct mii_data *mii; uint32_t link, status; BGE_LOCK_ASSERT(sc); /* Clear 'pending link event' flag. */ sc->bge_link_evt = 0; /* * Process link state changes. * Grrr. The link status word in the status block does * not work correctly on the BCM5700 rev AX and BX chips, * according to all available information. Hence, we have * to enable MII interrupts in order to properly obtain * async link changes. Unfortunately, this also means that * we have to read the MAC status register to detect link * changes, thereby adding an additional register access to * the interrupt handler. * * XXX: perhaps link state detection procedure used for * BGE_CHIPID_BCM5700_B2 can be used for others BCM5700 revisions. */ if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && sc->bge_chipid != BGE_CHIPID_BCM5700_B2) { status = CSR_READ_4(sc, BGE_MAC_STS); if (status & BGE_MACSTAT_MI_INTERRUPT) { mii = device_get_softc(sc->bge_miibus); mii_pollstat(mii); if (!sc->bge_link && mii->mii_media_status & IFM_ACTIVE && IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { sc->bge_link++; if (bootverbose) if_printf(sc->bge_ifp, "link UP\n"); } else if (sc->bge_link && (!(mii->mii_media_status & IFM_ACTIVE) || IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { sc->bge_link = 0; if (bootverbose) if_printf(sc->bge_ifp, "link DOWN\n"); } /* Clear the interrupt. */ CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_MI_INTERRUPT); bge_miibus_readreg(sc->bge_dev, sc->bge_phy_addr, BRGPHY_MII_ISR); bge_miibus_writereg(sc->bge_dev, sc->bge_phy_addr, BRGPHY_MII_IMR, BRGPHY_INTRS); } return; } if (sc->bge_flags & BGE_FLAG_TBI) { status = CSR_READ_4(sc, BGE_MAC_STS); if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) { if (!sc->bge_link) { sc->bge_link++; if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_TBI_SEND_CFGS); DELAY(40); } CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF); if (bootverbose) if_printf(sc->bge_ifp, "link UP\n"); if_link_state_change(sc->bge_ifp, LINK_STATE_UP); } } else if (sc->bge_link) { sc->bge_link = 0; if (bootverbose) if_printf(sc->bge_ifp, "link DOWN\n"); if_link_state_change(sc->bge_ifp, LINK_STATE_DOWN); } } else if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { /* * Some broken BCM chips have BGE_STATFLAG_LINKSTATE_CHANGED bit * in status word always set. Workaround this bug by reading * PHY link status directly. */ link = (CSR_READ_4(sc, BGE_MI_STS) & BGE_MISTS_LINK) ? 1 : 0; if (link != sc->bge_link || sc->bge_asicrev == BGE_ASICREV_BCM5700) { mii = device_get_softc(sc->bge_miibus); mii_pollstat(mii); if (!sc->bge_link && mii->mii_media_status & IFM_ACTIVE && IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { sc->bge_link++; if (bootverbose) if_printf(sc->bge_ifp, "link UP\n"); } else if (sc->bge_link && (!(mii->mii_media_status & IFM_ACTIVE) || IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { sc->bge_link = 0; if (bootverbose) if_printf(sc->bge_ifp, "link DOWN\n"); } } } else { /* * For controllers that call mii_tick, we have to poll * link status. */ mii = device_get_softc(sc->bge_miibus); mii_pollstat(mii); bge_miibus_statchg(sc->bge_dev); } /* Disable MAC attention when link is up. */ CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | BGE_MACSTAT_LINK_CHANGED); } static void bge_add_sysctls(struct bge_softc *sc) { struct sysctl_ctx_list *ctx; struct sysctl_oid_list *children; char tn[32]; int unit; ctx = device_get_sysctl_ctx(sc->bge_dev); children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bge_dev)); #ifdef BGE_REGISTER_DEBUG SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "debug_info", CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_debug_info, "I", "Debug Information"); SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "reg_read", CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_reg_read, "I", "MAC Register Read"); SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "ape_read", CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_ape_read, "I", "APE Register Read"); SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "mem_read", CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_mem_read, "I", "Memory Read"); #endif unit = device_get_unit(sc->bge_dev); /* * A common design characteristic for many Broadcom client controllers * is that they only support a single outstanding DMA read operation * on the PCIe bus. This means that it will take twice as long to fetch * a TX frame that is split into header and payload buffers as it does * to fetch a single, contiguous TX frame (2 reads vs. 1 read). For * these controllers, coalescing buffers to reduce the number of memory * reads is effective way to get maximum performance(about 940Mbps). * Without collapsing TX buffers the maximum TCP bulk transfer * performance is about 850Mbps. However forcing coalescing mbufs * consumes a lot of CPU cycles, so leave it off by default. */ sc->bge_forced_collapse = 0; snprintf(tn, sizeof(tn), "dev.bge.%d.forced_collapse", unit); TUNABLE_INT_FETCH(tn, &sc->bge_forced_collapse); SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_collapse", CTLFLAG_RW, &sc->bge_forced_collapse, 0, "Number of fragmented TX buffers of a frame allowed before " "forced collapsing"); sc->bge_msi = 1; snprintf(tn, sizeof(tn), "dev.bge.%d.msi", unit); TUNABLE_INT_FETCH(tn, &sc->bge_msi); SYSCTL_ADD_INT(ctx, children, OID_AUTO, "msi", CTLFLAG_RD, &sc->bge_msi, 0, "Enable MSI"); /* * It seems all Broadcom controllers have a bug that can generate UDP * datagrams with checksum value 0 when TX UDP checksum offloading is * enabled. Generating UDP checksum value 0 is RFC 768 violation. * Even though the probability of generating such UDP datagrams is * low, I don't want to see FreeBSD boxes to inject such datagrams * into network so disable UDP checksum offloading by default. Users * still override this behavior by setting a sysctl variable, * dev.bge.0.forced_udpcsum. */ sc->bge_forced_udpcsum = 0; snprintf(tn, sizeof(tn), "dev.bge.%d.bge_forced_udpcsum", unit); TUNABLE_INT_FETCH(tn, &sc->bge_forced_udpcsum); SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_udpcsum", CTLFLAG_RW, &sc->bge_forced_udpcsum, 0, "Enable UDP checksum offloading even if controller can " "generate UDP checksum value 0"); if (BGE_IS_5705_PLUS(sc)) bge_add_sysctl_stats_regs(sc, ctx, children); else bge_add_sysctl_stats(sc, ctx, children); } #define BGE_SYSCTL_STAT(sc, ctx, desc, parent, node, oid) \ SYSCTL_ADD_PROC(ctx, parent, OID_AUTO, oid, CTLTYPE_UINT|CTLFLAG_RD, \ sc, offsetof(struct bge_stats, node), bge_sysctl_stats, "IU", \ desc) static void bge_add_sysctl_stats(struct bge_softc *sc, struct sysctl_ctx_list *ctx, struct sysctl_oid_list *parent) { struct sysctl_oid *tree; struct sysctl_oid_list *children, *schildren; tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "stats", CTLFLAG_RD, NULL, "BGE Statistics"); schildren = children = SYSCTL_CHILDREN(tree); BGE_SYSCTL_STAT(sc, ctx, "Frames Dropped Due To Filters", children, COSFramesDroppedDueToFilters, "FramesDroppedDueToFilters"); BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write Queue Full", children, nicDmaWriteQueueFull, "DmaWriteQueueFull"); BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write High Priority Queue Full", children, nicDmaWriteHighPriQueueFull, "DmaWriteHighPriQueueFull"); BGE_SYSCTL_STAT(sc, ctx, "NIC No More RX Buffer Descriptors", children, nicNoMoreRxBDs, "NoMoreRxBDs"); BGE_SYSCTL_STAT(sc, ctx, "Discarded Input Frames", children, ifInDiscards, "InputDiscards"); BGE_SYSCTL_STAT(sc, ctx, "Input Errors", children, ifInErrors, "InputErrors"); BGE_SYSCTL_STAT(sc, ctx, "NIC Recv Threshold Hit", children, nicRecvThresholdHit, "RecvThresholdHit"); BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read Queue Full", children, nicDmaReadQueueFull, "DmaReadQueueFull"); BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read High Priority Queue Full", children, nicDmaReadHighPriQueueFull, "DmaReadHighPriQueueFull"); BGE_SYSCTL_STAT(sc, ctx, "NIC Send Data Complete Queue Full", children, nicSendDataCompQueueFull, "SendDataCompQueueFull"); BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Set Send Producer Index", children, nicRingSetSendProdIndex, "RingSetSendProdIndex"); BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Status Update", children, nicRingStatusUpdate, "RingStatusUpdate"); BGE_SYSCTL_STAT(sc, ctx, "NIC Interrupts", children, nicInterrupts, "Interrupts"); BGE_SYSCTL_STAT(sc, ctx, "NIC Avoided Interrupts", children, nicAvoidedInterrupts, "AvoidedInterrupts"); BGE_SYSCTL_STAT(sc, ctx, "NIC Send Threshold Hit", children, nicSendThresholdHit, "SendThresholdHit"); tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "rx", CTLFLAG_RD, NULL, "BGE RX Statistics"); children = SYSCTL_CHILDREN(tree); BGE_SYSCTL_STAT(sc, ctx, "Inbound Octets", children, rxstats.ifHCInOctets, "ifHCInOctets"); BGE_SYSCTL_STAT(sc, ctx, "Fragments", children, rxstats.etherStatsFragments, "Fragments"); BGE_SYSCTL_STAT(sc, ctx, "Inbound Unicast Packets", children, rxstats.ifHCInUcastPkts, "UnicastPkts"); BGE_SYSCTL_STAT(sc, ctx, "Inbound Multicast Packets", children, rxstats.ifHCInMulticastPkts, "MulticastPkts"); BGE_SYSCTL_STAT(sc, ctx, "FCS Errors", children, rxstats.dot3StatsFCSErrors, "FCSErrors"); BGE_SYSCTL_STAT(sc, ctx, "Alignment Errors", children, rxstats.dot3StatsAlignmentErrors, "AlignmentErrors"); BGE_SYSCTL_STAT(sc, ctx, "XON Pause Frames Received", children, rxstats.xonPauseFramesReceived, "xonPauseFramesReceived"); BGE_SYSCTL_STAT(sc, ctx, "XOFF Pause Frames Received", children, rxstats.xoffPauseFramesReceived, "xoffPauseFramesReceived"); BGE_SYSCTL_STAT(sc, ctx, "MAC Control Frames Received", children, rxstats.macControlFramesReceived, "ControlFramesReceived"); BGE_SYSCTL_STAT(sc, ctx, "XOFF State Entered", children, rxstats.xoffStateEntered, "xoffStateEntered"); BGE_SYSCTL_STAT(sc, ctx, "Frames Too Long", children, rxstats.dot3StatsFramesTooLong, "FramesTooLong"); BGE_SYSCTL_STAT(sc, ctx, "Jabbers", children, rxstats.etherStatsJabbers, "Jabbers"); BGE_SYSCTL_STAT(sc, ctx, "Undersized Packets", children, rxstats.etherStatsUndersizePkts, "UndersizePkts"); BGE_SYSCTL_STAT(sc, ctx, "Inbound Range Length Errors", children, rxstats.inRangeLengthError, "inRangeLengthError"); BGE_SYSCTL_STAT(sc, ctx, "Outbound Range Length Errors", children, rxstats.outRangeLengthError, "outRangeLengthError"); tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "tx", CTLFLAG_RD, NULL, "BGE TX Statistics"); children = SYSCTL_CHILDREN(tree); BGE_SYSCTL_STAT(sc, ctx, "Outbound Octets", children, txstats.ifHCOutOctets, "ifHCOutOctets"); BGE_SYSCTL_STAT(sc, ctx, "TX Collisions", children, txstats.etherStatsCollisions, "Collisions"); BGE_SYSCTL_STAT(sc, ctx, "XON Sent", children, txstats.outXonSent, "XonSent"); BGE_SYSCTL_STAT(sc, ctx, "XOFF Sent", children, txstats.outXoffSent, "XoffSent"); BGE_SYSCTL_STAT(sc, ctx, "Flow Control Done", children, txstats.flowControlDone, "flowControlDone"); BGE_SYSCTL_STAT(sc, ctx, "Internal MAC TX errors", children, txstats.dot3StatsInternalMacTransmitErrors, "InternalMacTransmitErrors"); BGE_SYSCTL_STAT(sc, ctx, "Single Collision Frames", children, txstats.dot3StatsSingleCollisionFrames, "SingleCollisionFrames"); BGE_SYSCTL_STAT(sc, ctx, "Multiple Collision Frames", children, txstats.dot3StatsMultipleCollisionFrames, "MultipleCollisionFrames"); BGE_SYSCTL_STAT(sc, ctx, "Deferred Transmissions", children, txstats.dot3StatsDeferredTransmissions, "DeferredTransmissions"); BGE_SYSCTL_STAT(sc, ctx, "Excessive Collisions", children, txstats.dot3StatsExcessiveCollisions, "ExcessiveCollisions"); BGE_SYSCTL_STAT(sc, ctx, "Late Collisions", children, txstats.dot3StatsLateCollisions, "LateCollisions"); BGE_SYSCTL_STAT(sc, ctx, "Outbound Unicast Packets", children, txstats.ifHCOutUcastPkts, "UnicastPkts"); BGE_SYSCTL_STAT(sc, ctx, "Outbound Multicast Packets", children, txstats.ifHCOutMulticastPkts, "MulticastPkts"); BGE_SYSCTL_STAT(sc, ctx, "Outbound Broadcast Packets", children, txstats.ifHCOutBroadcastPkts, "BroadcastPkts"); BGE_SYSCTL_STAT(sc, ctx, "Carrier Sense Errors", children, txstats.dot3StatsCarrierSenseErrors, "CarrierSenseErrors"); BGE_SYSCTL_STAT(sc, ctx, "Outbound Discards", children, txstats.ifOutDiscards, "Discards"); BGE_SYSCTL_STAT(sc, ctx, "Outbound Errors", children, txstats.ifOutErrors, "Errors"); } #undef BGE_SYSCTL_STAT #define BGE_SYSCTL_STAT_ADD64(c, h, n, p, d) \ SYSCTL_ADD_UQUAD(c, h, OID_AUTO, n, CTLFLAG_RD, p, d) static void bge_add_sysctl_stats_regs(struct bge_softc *sc, struct sysctl_ctx_list *ctx, struct sysctl_oid_list *parent) { struct sysctl_oid *tree; struct sysctl_oid_list *child, *schild; struct bge_mac_stats *stats; stats = &sc->bge_mac_stats; tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "stats", CTLFLAG_RD, NULL, "BGE Statistics"); schild = child = SYSCTL_CHILDREN(tree); BGE_SYSCTL_STAT_ADD64(ctx, child, "FramesDroppedDueToFilters", &stats->FramesDroppedDueToFilters, "Frames Dropped Due to Filters"); BGE_SYSCTL_STAT_ADD64(ctx, child, "DmaWriteQueueFull", &stats->DmaWriteQueueFull, "NIC DMA Write Queue Full"); BGE_SYSCTL_STAT_ADD64(ctx, child, "DmaWriteHighPriQueueFull", &stats->DmaWriteHighPriQueueFull, "NIC DMA Write High Priority Queue Full"); BGE_SYSCTL_STAT_ADD64(ctx, child, "NoMoreRxBDs", &stats->NoMoreRxBDs, "NIC No More RX Buffer Descriptors"); BGE_SYSCTL_STAT_ADD64(ctx, child, "InputDiscards", &stats->InputDiscards, "Discarded Input Frames"); BGE_SYSCTL_STAT_ADD64(ctx, child, "InputErrors", &stats->InputErrors, "Input Errors"); BGE_SYSCTL_STAT_ADD64(ctx, child, "RecvThresholdHit", &stats->RecvThresholdHit, "NIC Recv Threshold Hit"); tree = SYSCTL_ADD_NODE(ctx, schild, OID_AUTO, "rx", CTLFLAG_RD, NULL, "BGE RX Statistics"); child = SYSCTL_CHILDREN(tree); BGE_SYSCTL_STAT_ADD64(ctx, child, "ifHCInOctets", &stats->ifHCInOctets, "Inbound Octets"); BGE_SYSCTL_STAT_ADD64(ctx, child, "Fragments", &stats->etherStatsFragments, "Fragments"); BGE_SYSCTL_STAT_ADD64(ctx, child, "UnicastPkts", &stats->ifHCInUcastPkts, "Inbound Unicast Packets"); BGE_SYSCTL_STAT_ADD64(ctx, child, "MulticastPkts", &stats->ifHCInMulticastPkts, "Inbound Multicast Packets"); BGE_SYSCTL_STAT_ADD64(ctx, child, "BroadcastPkts", &stats->ifHCInBroadcastPkts, "Inbound Broadcast Packets"); BGE_SYSCTL_STAT_ADD64(ctx, child, "FCSErrors", &stats->dot3StatsFCSErrors, "FCS Errors"); BGE_SYSCTL_STAT_ADD64(ctx, child, "AlignmentErrors", &stats->dot3StatsAlignmentErrors, "Alignment Errors"); BGE_SYSCTL_STAT_ADD64(ctx, child, "xonPauseFramesReceived", &stats->xonPauseFramesReceived, "XON Pause Frames Received"); BGE_SYSCTL_STAT_ADD64(ctx, child, "xoffPauseFramesReceived", &stats->xoffPauseFramesReceived, "XOFF Pause Frames Received"); BGE_SYSCTL_STAT_ADD64(ctx, child, "ControlFramesReceived", &stats->macControlFramesReceived, "MAC Control Frames Received"); BGE_SYSCTL_STAT_ADD64(ctx, child, "xoffStateEntered", &stats->xoffStateEntered, "XOFF State Entered"); BGE_SYSCTL_STAT_ADD64(ctx, child, "FramesTooLong", &stats->dot3StatsFramesTooLong, "Frames Too Long"); BGE_SYSCTL_STAT_ADD64(ctx, child, "Jabbers", &stats->etherStatsJabbers, "Jabbers"); BGE_SYSCTL_STAT_ADD64(ctx, child, "UndersizePkts", &stats->etherStatsUndersizePkts, "Undersized Packets"); tree = SYSCTL_ADD_NODE(ctx, schild, OID_AUTO, "tx", CTLFLAG_RD, NULL, "BGE TX Statistics"); child = SYSCTL_CHILDREN(tree); BGE_SYSCTL_STAT_ADD64(ctx, child, "ifHCOutOctets", &stats->ifHCOutOctets, "Outbound Octets"); BGE_SYSCTL_STAT_ADD64(ctx, child, "Collisions", &stats->etherStatsCollisions, "TX Collisions"); BGE_SYSCTL_STAT_ADD64(ctx, child, "XonSent", &stats->outXonSent, "XON Sent"); BGE_SYSCTL_STAT_ADD64(ctx, child, "XoffSent", &stats->outXoffSent, "XOFF Sent"); BGE_SYSCTL_STAT_ADD64(ctx, child, "InternalMacTransmitErrors", &stats->dot3StatsInternalMacTransmitErrors, "Internal MAC TX Errors"); BGE_SYSCTL_STAT_ADD64(ctx, child, "SingleCollisionFrames", &stats->dot3StatsSingleCollisionFrames, "Single Collision Frames"); BGE_SYSCTL_STAT_ADD64(ctx, child, "MultipleCollisionFrames", &stats->dot3StatsMultipleCollisionFrames, "Multiple Collision Frames"); BGE_SYSCTL_STAT_ADD64(ctx, child, "DeferredTransmissions", &stats->dot3StatsDeferredTransmissions, "Deferred Transmissions"); BGE_SYSCTL_STAT_ADD64(ctx, child, "ExcessiveCollisions", &stats->dot3StatsExcessiveCollisions, "Excessive Collisions"); BGE_SYSCTL_STAT_ADD64(ctx, child, "LateCollisions", &stats->dot3StatsLateCollisions, "Late Collisions"); BGE_SYSCTL_STAT_ADD64(ctx, child, "UnicastPkts", &stats->ifHCOutUcastPkts, "Outbound Unicast Packets"); BGE_SYSCTL_STAT_ADD64(ctx, child, "MulticastPkts", &stats->ifHCOutMulticastPkts, "Outbound Multicast Packets"); BGE_SYSCTL_STAT_ADD64(ctx, child, "BroadcastPkts", &stats->ifHCOutBroadcastPkts, "Outbound Broadcast Packets"); } #undef BGE_SYSCTL_STAT_ADD64 static int bge_sysctl_stats(SYSCTL_HANDLER_ARGS) { struct bge_softc *sc; uint32_t result; int offset; sc = (struct bge_softc *)arg1; offset = arg2; result = CSR_READ_4(sc, BGE_MEMWIN_START + BGE_STATS_BLOCK + offset + offsetof(bge_hostaddr, bge_addr_lo)); return (sysctl_handle_int(oidp, &result, 0, req)); } #ifdef BGE_REGISTER_DEBUG static int bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS) { struct bge_softc *sc; uint16_t *sbdata; int error, result, sbsz; int i, j; result = -1; error = sysctl_handle_int(oidp, &result, 0, req); if (error || (req->newptr == NULL)) return (error); if (result == 1) { sc = (struct bge_softc *)arg1; if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && sc->bge_chipid != BGE_CHIPID_BCM5700_C0) sbsz = BGE_STATUS_BLK_SZ; else sbsz = 32; sbdata = (uint16_t *)sc->bge_ldata.bge_status_block; printf("Status Block:\n"); BGE_LOCK(sc); bus_dmamap_sync(sc->bge_cdata.bge_status_tag, sc->bge_cdata.bge_status_map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); for (i = 0x0; i < sbsz / sizeof(uint16_t); ) { printf("%06x:", i); for (j = 0; j < 8; j++) printf(" %04x", sbdata[i++]); printf("\n"); } printf("Registers:\n"); for (i = 0x800; i < 0xA00; ) { printf("%06x:", i); for (j = 0; j < 8; j++) { printf(" %08x", CSR_READ_4(sc, i)); i += 4; } printf("\n"); } BGE_UNLOCK(sc); printf("Hardware Flags:\n"); if (BGE_IS_5717_PLUS(sc)) printf(" - 5717 Plus\n"); if (BGE_IS_5755_PLUS(sc)) printf(" - 5755 Plus\n"); if (BGE_IS_575X_PLUS(sc)) printf(" - 575X Plus\n"); if (BGE_IS_5705_PLUS(sc)) printf(" - 5705 Plus\n"); if (BGE_IS_5714_FAMILY(sc)) printf(" - 5714 Family\n"); if (BGE_IS_5700_FAMILY(sc)) printf(" - 5700 Family\n"); if (sc->bge_flags & BGE_FLAG_JUMBO) printf(" - Supports Jumbo Frames\n"); if (sc->bge_flags & BGE_FLAG_PCIX) printf(" - PCI-X Bus\n"); if (sc->bge_flags & BGE_FLAG_PCIE) printf(" - PCI Express Bus\n"); if (sc->bge_phy_flags & BGE_PHY_NO_3LED) printf(" - No 3 LEDs\n"); if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) printf(" - RX Alignment Bug\n"); } return (error); } static int bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS) { struct bge_softc *sc; int error; uint16_t result; uint32_t val; result = -1; error = sysctl_handle_int(oidp, &result, 0, req); if (error || (req->newptr == NULL)) return (error); if (result < 0x8000) { sc = (struct bge_softc *)arg1; val = CSR_READ_4(sc, result); printf("reg 0x%06X = 0x%08X\n", result, val); } return (error); } static int bge_sysctl_ape_read(SYSCTL_HANDLER_ARGS) { struct bge_softc *sc; int error; uint16_t result; uint32_t val; result = -1; error = sysctl_handle_int(oidp, &result, 0, req); if (error || (req->newptr == NULL)) return (error); if (result < 0x8000) { sc = (struct bge_softc *)arg1; val = APE_READ_4(sc, result); printf("reg 0x%06X = 0x%08X\n", result, val); } return (error); } static int bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS) { struct bge_softc *sc; int error; uint16_t result; uint32_t val; result = -1; error = sysctl_handle_int(oidp, &result, 0, req); if (error || (req->newptr == NULL)) return (error); if (result < 0x8000) { sc = (struct bge_softc *)arg1; val = bge_readmem_ind(sc, result); printf("mem 0x%06X = 0x%08X\n", result, val); } return (error); } #endif static int bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]) { if (sc->bge_flags & BGE_FLAG_EADDR) return (1); #ifdef __sparc64__ OF_getetheraddr(sc->bge_dev, ether_addr); return (0); #endif return (1); } static int bge_get_eaddr_mem(struct bge_softc *sc, uint8_t ether_addr[]) { uint32_t mac_addr; mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_HIGH_MB); if ((mac_addr >> 16) == 0x484b) { ether_addr[0] = (uint8_t)(mac_addr >> 8); ether_addr[1] = (uint8_t)mac_addr; mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_LOW_MB); ether_addr[2] = (uint8_t)(mac_addr >> 24); ether_addr[3] = (uint8_t)(mac_addr >> 16); ether_addr[4] = (uint8_t)(mac_addr >> 8); ether_addr[5] = (uint8_t)mac_addr; return (0); } return (1); } static int bge_get_eaddr_nvram(struct bge_softc *sc, uint8_t ether_addr[]) { int mac_offset = BGE_EE_MAC_OFFSET; if (sc->bge_asicrev == BGE_ASICREV_BCM5906) mac_offset = BGE_EE_MAC_OFFSET_5906; return (bge_read_nvram(sc, ether_addr, mac_offset + 2, ETHER_ADDR_LEN)); } static int bge_get_eaddr_eeprom(struct bge_softc *sc, uint8_t ether_addr[]) { if (sc->bge_asicrev == BGE_ASICREV_BCM5906) return (1); return (bge_read_eeprom(sc, ether_addr, BGE_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)); } static int bge_get_eaddr(struct bge_softc *sc, uint8_t eaddr[]) { static const bge_eaddr_fcn_t bge_eaddr_funcs[] = { /* NOTE: Order is critical */ bge_get_eaddr_fw, bge_get_eaddr_mem, bge_get_eaddr_nvram, bge_get_eaddr_eeprom, NULL }; const bge_eaddr_fcn_t *func; for (func = bge_eaddr_funcs; *func != NULL; ++func) { if ((*func)(sc, eaddr) == 0) break; } return (*func == NULL ? ENXIO : 0); }