/*- * Device probe and attach routines for the following * Advanced Systems Inc. SCSI controllers: * * ABP[3]940UW - Bus-Master PCI Ultra-Wide (253 CDB) * ABP950UW - Dual Channel Bus-Master PCI Ultra-Wide (253 CDB/Channel) * ABP970UW - Bus-Master PCI Ultra-Wide (253 CDB) * ABP3940U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB) * ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB) * * Copyright (c) 1998, 1999, 2000 Justin Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define ADW_PCI_IOBASE PCIR_BAR(0) /* I/O Address */ #define ADW_PCI_MEMBASE PCIR_BAR(1) /* Mem I/O Address */ #define PCI_ID_ADVANSYS_3550 0x230010CD00000000ull #define PCI_ID_ADVANSYS_38C0800_REV1 0x250010CD00000000ull #define PCI_ID_ADVANSYS_38C1600_REV1 0x270010CD00000000ull #define PCI_ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull #define PCI_ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull struct adw_pci_identity; typedef int (adw_device_setup_t)(device_t, struct adw_pci_identity *, struct adw_softc *adw); struct adw_pci_identity { u_int64_t full_id; u_int64_t id_mask; char *name; adw_device_setup_t *setup; const struct adw_mcode *mcode_data; const struct adw_eeprom *default_eeprom; }; static adw_device_setup_t adw_asc3550_setup; static adw_device_setup_t adw_asc38C0800_setup; #ifdef NOTYET static adw_device_setup_t adw_asc38C1600_setup; #endif struct adw_pci_identity adw_pci_ident_table[] = { /* asc3550 based controllers */ { PCI_ID_ADVANSYS_3550, PCI_ID_DEV_VENDOR_MASK, "AdvanSys 3550 Ultra SCSI Adapter", adw_asc3550_setup, &adw_asc3550_mcode_data, &adw_asc3550_default_eeprom }, /* asc38C0800 based controllers */ { PCI_ID_ADVANSYS_38C0800_REV1, PCI_ID_DEV_VENDOR_MASK, "AdvanSys 38C0800 Ultra2 SCSI Adapter", adw_asc38C0800_setup, &adw_asc38C0800_mcode_data, &adw_asc38C0800_default_eeprom }, #if NOTYET /* XXX Disabled until I have hardware to test with */ /* asc38C1600 based controllers */ { PCI_ID_ADVANSYS_38C1600_REV1, PCI_ID_DEV_VENDOR_MASK, "AdvanSys 38C1600 Ultra160 SCSI Adapter", adw_asc38C1600_setup, NULL, /* None provided by vendor thus far */ NULL /* None provided by vendor thus far */ } #endif }; static const int adw_num_pci_devs = sizeof(adw_pci_ident_table) / sizeof(*adw_pci_ident_table); #define ADW_PCI_MAX_DMA_ADDR (0xFFFFFFFFUL) #define ADW_PCI_MAX_DMA_COUNT (0xFFFFFFFFUL) static int adw_pci_probe(device_t dev); static int adw_pci_attach(device_t dev); static device_method_t adw_pci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, adw_pci_probe), DEVMETHOD(device_attach, adw_pci_attach), { 0, 0 } }; static driver_t adw_pci_driver = { "adw", adw_pci_methods, sizeof(struct adw_softc) }; static devclass_t adw_devclass; DRIVER_MODULE(adw, pci, adw_pci_driver, adw_devclass, 0, 0); static __inline u_int64_t adw_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor) { u_int64_t id; id = subvendor | (subdevice << 16) | ((u_int64_t)vendor << 32) | ((u_int64_t)device << 48); return (id); } static struct adw_pci_identity * adw_find_pci_device(device_t dev) { u_int64_t full_id; struct adw_pci_identity *entry; u_int i; full_id = adw_compose_id(pci_get_device(dev), pci_get_vendor(dev), pci_get_subdevice(dev), pci_get_subvendor(dev)); for (i = 0; i < adw_num_pci_devs; i++) { entry = &adw_pci_ident_table[i]; if (entry->full_id == (full_id & entry->id_mask)) return (entry); } return (NULL); } static int adw_pci_probe(device_t dev) { struct adw_pci_identity *entry; entry = adw_find_pci_device(dev); if (entry != NULL) { device_set_desc(dev, entry->name); return (BUS_PROBE_DEFAULT); } return (ENXIO); } static int adw_pci_attach(device_t dev) { struct adw_softc *adw; struct adw_pci_identity *entry; u_int32_t command; struct resource *regs; int regs_type; int regs_id; int error; int zero; command = pci_read_config(dev, PCIR_COMMAND, /*bytes*/1); entry = adw_find_pci_device(dev); if (entry == NULL) return (ENXIO); regs = NULL; regs_type = 0; regs_id = 0; #ifdef ADW_ALLOW_MEMIO if ((command & PCIM_CMD_MEMEN) != 0) { regs_type = SYS_RES_MEMORY; regs_id = ADW_PCI_MEMBASE; regs = bus_alloc_resource_any(dev, regs_type, ®s_id, RF_ACTIVE); } #endif if (regs == NULL && (command & PCIM_CMD_PORTEN) != 0) { regs_type = SYS_RES_IOPORT; regs_id = ADW_PCI_IOBASE; regs = bus_alloc_resource_any(dev, regs_type, ®s_id, RF_ACTIVE); } if (regs == NULL) { device_printf(dev, "can't allocate register resources\n"); return (ENOMEM); } adw = adw_alloc(dev, regs, regs_type, regs_id); if (adw == NULL) return(ENOMEM); /* * Now that we have access to our registers, just verify that * this really is an AdvanSys device. */ if (adw_find_signature(adw) == 0) { adw_free(adw); return (ENXIO); } adw_reset_chip(adw); error = entry->setup(dev, entry, adw); if (error != 0) return (error); /* Ensure busmastering is enabled */ command |= PCIM_CMD_BUSMASTEREN; pci_write_config(dev, PCIR_COMMAND, command, /*bytes*/1); /* Allocate a dmatag for our transfer DMA maps */ /* XXX Should be a child of the PCI bus dma tag */ error = bus_dma_tag_create( /* parent */ NULL, /* alignment */ 1, /* boundary */ 0, /* lowaddr */ ADW_PCI_MAX_DMA_ADDR, /* highaddr */ BUS_SPACE_MAXADDR, /* filter */ NULL, /* filterarg */ NULL, /* maxsize */ BUS_SPACE_MAXSIZE_32BIT, /* nsegments */ ~0, /* maxsegsz */ ADW_PCI_MAX_DMA_COUNT, /* flags */ 0, /* lockfunc */ busdma_lock_mutex, /* lockarg */ &Giant, &adw->parent_dmat); adw->init_level++; if (error != 0) { printf("%s: Could not allocate DMA tag - error %d\n", adw_name(adw), error); adw_free(adw); return (error); } adw->init_level++; error = adw_init(adw); if (error != 0) { adw_free(adw); return (error); } /* * If the PCI Configuration Command Register "Parity Error Response * Control" Bit was clear (0), then set the microcode variable * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode * to ignore DMA parity errors. */ if ((command & PCIM_CMD_PERRESPEN) == 0) adw_lram_write_16(adw, ADW_MC_CONTROL_FLAG, adw_lram_read_16(adw, ADW_MC_CONTROL_FLAG) | ADW_MC_CONTROL_IGN_PERR); zero = 0; adw->irq_res_type = SYS_RES_IRQ; adw->irq = bus_alloc_resource_any(dev, adw->irq_res_type, &zero, RF_ACTIVE | RF_SHAREABLE); if (adw->irq == NULL) { adw_free(adw); return (ENOMEM); } error = adw_attach(adw); if (error != 0) adw_free(adw); return (error); } static int adw_generic_setup(device_t dev, struct adw_pci_identity *entry, struct adw_softc *adw) { adw->channel = pci_get_function(dev) == 1 ? 'B' : 'A'; adw->chip = ADW_CHIP_NONE; adw->features = ADW_FENONE; adw->flags = ADW_FNONE; adw->mcode_data = entry->mcode_data; adw->default_eeprom = entry->default_eeprom; return (0); } static int adw_asc3550_setup(device_t dev, struct adw_pci_identity *entry, struct adw_softc *adw) { int error; error = adw_generic_setup(dev, entry, adw); if (error != 0) return (error); adw->chip = ADW_CHIP_ASC3550; adw->features = ADW_ASC3550_FE; adw->memsize = ADW_3550_MEMSIZE; /* * For ASC-3550, setting the START_CTL_EMFU [3:2] bits * sets a FIFO threshold of 128 bytes. This register is * only accessible to the host. */ adw_outb(adw, ADW_DMA_CFG0, ADW_DMA_CFG0_START_CTL_EM_FU|ADW_DMA_CFG0_READ_CMD_MRM); adw_outb(adw, ADW_MEM_CFG, adw_inb(adw, ADW_MEM_CFG) | ADW_MEM_CFG_RAM_SZ_8KB); return (0); } static int adw_asc38C0800_setup(device_t dev, struct adw_pci_identity *entry, struct adw_softc *adw) { int error; error = adw_generic_setup(dev, entry, adw); if (error != 0) return (error); /* * For ASC-38C0800, set FIFO_THRESH_80B [6:4] bits and * START_CTL_TH [3:2] bits for the default FIFO threshold. * * Note: ASC-38C0800 FIFO threshold has been changed to 256 bytes. * * For DMA Errata #4 set the BC_THRESH_ENB bit. */ adw_outb(adw, ADW_DMA_CFG0, ADW_DMA_CFG0_BC_THRESH_ENB|ADW_DMA_CFG0_FIFO_THRESH_80B |ADW_DMA_CFG0_START_CTL_TH|ADW_DMA_CFG0_READ_CMD_MRM); adw_outb(adw, ADW_MEM_CFG, adw_inb(adw, ADW_MEM_CFG) | ADW_MEM_CFG_RAM_SZ_16KB); adw->chip = ADW_CHIP_ASC38C0800; adw->features = ADW_ASC38C0800_FE; adw->memsize = ADW_38C0800_MEMSIZE; return (error); } #ifdef NOTYET static int adw_asc38C1600_setup(device_t dev, struct adw_pci_identity *entry, struct adw_softc *adw) { int error; error = adw_generic_setup(dev, entry, adw); if (error != 0) return (error); adw->chip = ADW_CHIP_ASC38C1600; adw->features = ADW_ASC38C1600_FE; adw->memsize = ADW_38C1600_MEMSIZE; return (error); } #endif