/*- * Copyright (c) 1999 Michael Smith * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ /* * Debugging levels: * 0 - quiet, only emit warnings * 1 - noisy, emit major function points and things done * 2 - extremely noisy, emit trace items in loops, etc. */ #ifdef MLX_DEBUG #define debug(level, fmt, args...) do { if (level <= MLX_DEBUG) printf("%s: " fmt "\n", __FUNCTION__ , ##args); } while(0) #define debug_called(level) do { if (level <= MLX_DEBUG) printf(__FUNCTION__ ": called\n"); } while(0) #else #define debug(level, fmt, args...) #define debug_called(level) #endif /* * We could actually use all 17/33 segments, but using only 16/32 means that * each scatter/gather map is 128/256 bytes in size, and thus we don't have to worry about * maps crossing page boundaries. */ #define MLX_NSEG_OLD 16 /* max scatter/gather segments we use 3.x and earlier */ #define MLX_NSEG_NEW 32 /* max scatter/gather segments we use 4.x and later */ #define MLX_NSLOTS 256 /* max number of command slots */ #define MLX_MAXDRIVES 32 /* max number of system drives */ /* * Structure describing a System Drive as attached to the controller. */ struct mlx_sysdrive { /* from MLX_CMD_ENQSYSDRIVE */ u_int32_t ms_size; int ms_state; int ms_raidlevel; /* synthetic geometry */ int ms_cylinders; int ms_heads; int ms_sectors; /* handle for attached driver */ device_t ms_disk; }; /* * Per-command control structure. */ struct mlx_command { TAILQ_ENTRY(mlx_command) mc_link; /* list linkage */ struct mlx_softc *mc_sc; /* controller that owns us */ u_int8_t mc_slot; /* command slot we occupy */ u_int16_t mc_status; /* command completion status */ time_t mc_timeout; /* when this command expires */ u_int8_t mc_mailbox[16]; /* command mailbox */ u_int32_t mc_sgphys; /* physical address of s/g array in controller space */ int mc_nsgent; /* number of entries in s/g map */ int mc_flags; #define MLX_CMD_DATAIN (1<<0) #define MLX_CMD_DATAOUT (1<<1) #define MLX_CMD_PRIORITY (1<<2) /* high-priority command */ void *mc_data; /* data buffer */ size_t mc_length; bus_dmamap_t mc_dmamap; /* DMA map for data */ u_int32_t mc_dataphys; /* data buffer base address controller space */ void (* mc_complete)(struct mlx_command *mc); /* completion handler */ void *mc_private; /* submitter-private data or wait channel */ }; /* * Per-controller structure. */ struct mlx_softc { /* bus connections */ device_t mlx_dev; dev_t mlx_dev_t; struct resource *mlx_mem; /* mailbox interface window */ bus_space_handle_t mlx_bhandle; /* bus space handle */ bus_space_tag_t mlx_btag; /* bus space tag */ bus_dma_tag_t mlx_parent_dmat;/* parent DMA tag */ bus_dma_tag_t mlx_buffer_dmat;/* data buffer DMA tag */ struct resource *mlx_irq; /* interrupt */ void *mlx_intr; /* interrupt handle */ /* scatter/gather lists and their controller-visible mappings */ struct mlx_sgentry *mlx_sgtable; /* s/g lists */ u_int32_t mlx_sgbusaddr; /* s/g table base address in bus space */ bus_dma_tag_t mlx_sg_dmat; /* s/g buffer DMA tag */ bus_dmamap_t mlx_sg_dmamap; /* map for s/g buffers */ int mlx_sg_nseg; /* max number of s/g entries */ /* controller limits and features */ struct mlx_enquiry2 *mlx_enq2; int mlx_maxiop; /* hard maximum number of commands */ int mlx_feature; /* controller features/quirks */ #define MLX_FEAT_PAUSEWORKS (1<<0) /* channel pause works as expected */ /* controller queues and arrays */ TAILQ_HEAD(, mlx_command) mlx_freecmds; /* command structures available for reuse */ TAILQ_HEAD(, mlx_command) mlx_work; /* active commands */ struct mlx_command *mlx_busycmd[MLX_NSLOTS]; /* busy commands */ int mlx_busycmds; /* count of busy commands */ struct mlx_sysdrive mlx_sysdrive[MLX_MAXDRIVES]; /* system drives */ struct buf_queue_head mlx_bufq; /* outstanding I/O operations */ int mlx_waitbufs; /* number of bufs awaiting commands */ /* controller status */ int mlx_geom; #define MLX_GEOM_128_32 0 /* geoemetry translation modes */ #define MLX_GEOM_256_63 1 int mlx_state; #define MLX_STATE_INTEN (1<<0) /* interrupts have been enabled */ #define MLX_STATE_SHUTDOWN (1<<1) /* controller is shut down */ #define MLX_STATE_OPEN (1<<2) /* control device is open */ #define MLX_STATE_SUSPEND (1<<3) /* controller is suspended */ struct callout_handle mlx_timeout; /* periodic status monitor */ time_t mlx_lastpoll; /* last time_second we polled for status */ u_int16_t mlx_lastevent; /* sequence number of the last event we recorded */ int mlx_currevent; /* sequence number last time we looked */ int mlx_background; /* if != 0 rebuild or check is in progress */ #define MLX_BACKGROUND_CHECK 1 /* we started a check */ #define MLX_BACKGROUND_REBUILD 2 /* we started a rebuild */ #define MLX_BACKGROUND_SPONTANEOUS 3 /* it just happened somehow */ struct mlx_rebuild_status mlx_rebuildstat; /* last rebuild status */ struct mlx_pause mlx_pause; /* pending pause operation details */ int mlx_locks; /* reentrancy avoidance */ int mlx_flags; #define MLX_SPINUP_REPORTED (1<<0) /* "spinning up drives" message displayed */ /* interface-specific accessor functions */ int mlx_iftype; /* interface protocol */ #define MLX_IFTYPE_2 2 #define MLX_IFTYPE_3 3 #define MLX_IFTYPE_4 4 #define MLX_IFTYPE_5 5 int (* mlx_tryqueue)(struct mlx_softc *sc, struct mlx_command *mc); int (* mlx_findcomplete)(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); void (* mlx_intaction)(struct mlx_softc *sc, int action); int (* mlx_fw_handshake)(struct mlx_softc *sc, int *error, int *param1, int *param2); #define MLX_INTACTION_DISABLE 0 #define MLX_INTACTION_ENABLE 1 }; /* * Simple (stupid) locks. * * Note that these are designed to avoid reentrancy, not concurrency, and will * need to be replaced with something better. */ #define MLX_LOCK_COMPLETING (1<<0) #define MLX_LOCK_STARTING (1<<1) static __inline int mlx_lock_tas(struct mlx_softc *sc, int lock) { if ((sc)->mlx_locks & (lock)) return(1); atomic_set_int(&sc->mlx_locks, lock); return(0); } static __inline void mlx_lock_clr(struct mlx_softc *sc, int lock) { atomic_clear_int(&sc->mlx_locks, lock); } /* * Interface between bus connections and driver core. */ extern void mlx_free(struct mlx_softc *sc); extern int mlx_attach(struct mlx_softc *sc); extern void mlx_startup(struct mlx_softc *sc); extern void mlx_intr(void *data); extern int mlx_detach(device_t dev); extern int mlx_shutdown(device_t dev); extern int mlx_suspend(device_t dev); extern int mlx_resume(device_t dev); extern d_open_t mlx_open; extern d_close_t mlx_close; extern d_ioctl_t mlx_ioctl; extern devclass_t mlx_devclass; extern devclass_t mlxd_devclass; /* * Mylex System Disk driver */ struct mlxd_softc { device_t mlxd_dev; dev_t mlxd_dev_t; struct mlx_softc *mlxd_controller; struct mlx_sysdrive *mlxd_drive; struct disk mlxd_disk; struct devstat mlxd_stats; struct disklabel mlxd_label; int mlxd_unit; int mlxd_flags; #define MLXD_OPEN (1<<0) /* drive is open (can't shut down) */ }; /* * Interface between driver core and disk driver (should be using a bus?) */ extern int mlx_submit_buf(struct mlx_softc *sc, struct buf *bp); extern int mlx_submit_ioctl(struct mlx_softc *sc, struct mlx_sysdrive *drive, u_long cmd, caddr_t addr, int32_t flag, struct proc *p); extern void mlxd_intr(void *data);