/* * Copyright (c) 1996 - 2001 John Hay. * Copyright (c) 1996 SDL Communications, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ /* * Programming assumptions and other issues. * * Only a 16K window will be used. * * The descriptors of a DMA channel will fit in a 16K memory window. * * The buffers of a transmit DMA channel will fit in a 16K memory window. * * When interface is going up, handshaking is set and it is only cleared * when the interface is down'ed. * * There should be a way to set/reset Raw HDLC/PPP, Loopback, DCE/DTE, * internal/external clock, etc..... * */ #include "opt_netgraph.h" #ifdef NETGRAPH #include #endif /* NETGRAPH */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef NETGRAPH #include #else /* NETGRAPH */ #include #include #endif /* NETGRAPH */ #include #include #include #ifdef NETGRAPH #include #include #endif /* NETGRAPH */ /* #define USE_MODEMCK */ #ifndef BUGGY #define BUGGY 0 #endif #ifndef NETGRAPH #define PPP_HEADER_LEN 4 #endif /* NETGRAPH */ static int next_sc_unit = 0; #ifndef NETGRAPH #ifdef USE_MODEMCK static int sr_watcher = 0; #endif #endif /* NETGRAPH */ /* * Define the software interface for the card... There is one for * every channel (port). */ struct sr_softc { #ifndef NETGRAPH struct sppp ifsppp; /* PPP service w/in system */ #endif /* NETGRAPH */ struct sr_hardc *hc; /* card-level information */ int unit; /* With regard to all sr devices */ int subunit; /* With regard to this card */ struct buf_block { u_int txdesc; /* DPRAM offset */ u_int txstart;/* DPRAM offset */ u_int txend; /* DPRAM offset */ u_int txtail; /* # of 1st free gran */ u_int txmax; /* # of free grans */ u_int txeda; /* err descr addr */ } block[SR_TX_BLOCKS]; char xmit_busy; /* Transmitter is busy */ char txb_inuse; /* # of tx grans in use */ u_int txb_new; /* ndx to new buffer */ u_int txb_next_tx; /* ndx to next gran rdy tx */ u_int rxdesc; /* DPRAM offset */ u_int rxstart; /* DPRAM offset */ u_int rxend; /* DPRAM offset */ u_int rxhind; /* ndx to the hd of rx bufrs */ u_int rxmax; /* # of avail grans */ u_int clk_cfg; /* Clock configuration */ int scachan; /* channel # on card */ #ifdef NETGRAPH int running; /* something is attached so we are running */ int dcd; /* do we have dcd? */ /* ---netgraph bits --- */ char nodename[NG_NODELEN + 1]; /* store our node name */ int datahooks; /* number of data hooks attached */ node_p node; /* netgraph node */ hook_p hook; /* data hook */ hook_p debug_hook; struct ifqueue xmitq_hipri; /* hi-priority transmit queue */ struct ifqueue xmitq; /* transmit queue */ int flags; /* state */ #define SCF_RUNNING 0x01 /* board is active */ #define SCF_OACTIVE 0x02 /* output is active */ int out_dog; /* watchdog cycles output count-down */ struct callout_handle handle; /* timeout(9) handle */ u_long inbytes, outbytes; /* stats */ u_long lastinbytes, lastoutbytes; /* a second ago */ u_long inrate, outrate; /* highest rate seen */ u_long inlast; /* last input N secs ago */ u_long out_deficit; /* output since last input */ u_long oerrors, ierrors[6]; u_long opackets, ipackets; #endif /* NETGRAPH */ }; #ifdef NETGRAPH #define DOG_HOLDOFF 6 /* dog holds off for 6 secs */ #define QUITE_A_WHILE 300 /* 5 MINUTES */ #define LOTS_OF_PACKETS 100 #endif /* NETGRAPH */ /* * Baud Rate table for Sync Mode. * Each entry consists of 3 elements: * Baud Rate (x100) , TMC, BR * * Baud Rate = FCLK / TMC / 2^BR * Baud table for Crystal freq. of 9.8304 Mhz */ #ifdef N2_TEST_SPEED struct rate_line { int target; /* target rate/100 */ int tmc_reg; /* TMC register value */ int br_reg; /* BR (BaudRateClk) selector */ } n2_rates[] = { /* Baudx100 TMC BR */ { 3, 128, 8 }, { 6, 128, 7 }, { 12, 128, 6 }, { 24, 128, 5 }, { 48, 128, 4 }, { 96, 128, 3 }, { 192, 128, 2 }, { 384, 128, 1 }, { 560, 88, 1 }, { 640, 77, 1 }, { 1280, 38, 1 }, { 2560, 19, 1 }, { 5120, 10, 1 }, { 10000, 5, 1 }, { 15000, 3, 1 }, { 25000, 2, 1 }, { 50000, 1, 1 }, { 0, 0, 0 } }; int sr_test_speed[] = { N2_TEST_SPEED, N2_TEST_SPEED }; int etc0vals[] = { SR_MCR_ETC0, /* ISA channel 0 */ SR_MCR_ETC1, /* ISA channel 1 */ SR_FECR_ETC0, /* PCI channel 0 */ SR_FECR_ETC1 /* PCI channel 1 */ }; #endif devclass_t sr_devclass; #ifndef NETGRAPH MODULE_DEPEND(if_sr, sppp, 1, 1, 1); #else MODULE_DEPEND(ng_sync_sr, netgraph, 1, 1, 1); #endif static void srintr(void *arg); static void sr_xmit(struct sr_softc *sc); #ifndef NETGRAPH static void srstart(struct ifnet *ifp); static int srioctl(struct ifnet *ifp, u_long cmd, caddr_t data); static void srwatchdog(struct ifnet *ifp); #else static void srstart(struct sr_softc *sc); static void srwatchdog(struct sr_softc *sc); #endif /* NETGRAPH */ static int sr_packet_avail(struct sr_softc *sc, int *len, u_char *rxstat); static void sr_copy_rxbuf(struct mbuf *m, struct sr_softc *sc, int len); static void sr_eat_packet(struct sr_softc *sc, int single); static void sr_get_packets(struct sr_softc *sc); static void sr_up(struct sr_softc *sc); static void sr_down(struct sr_softc *sc); static void src_init(struct sr_hardc *hc); static void sr_init_sca(struct sr_hardc *hc); static void sr_init_msci(struct sr_softc *sc); static void sr_init_rx_dmac(struct sr_softc *sc); static void sr_init_tx_dmac(struct sr_softc *sc); static void sr_dmac_intr(struct sr_hardc *hc, u_char isr); static void sr_msci_intr(struct sr_hardc *hc, u_char isr); static void sr_timer_intr(struct sr_hardc *hc, u_char isr); #ifndef NETGRAPH #ifdef USE_MODEMCK static void sr_modemck(void *x); #endif #else static void sr_modemck(struct sr_softc *x); #endif /* NETGRAPH */ #ifdef NETGRAPH static void ngsr_watchdog_frame(void * arg); static void ngsr_init(void* ignored); static ng_constructor_t ngsr_constructor; static ng_rcvmsg_t ngsr_rcvmsg; static ng_shutdown_t ngsr_shutdown; static ng_newhook_t ngsr_newhook; /*static ng_findhook_t ngsr_findhook; */ static ng_connect_t ngsr_connect; static ng_rcvdata_t ngsr_rcvdata; static ng_disconnect_t ngsr_disconnect; static struct ng_type typestruct = { NG_ABI_VERSION, NG_SR_NODE_TYPE, NULL, ngsr_constructor, ngsr_rcvmsg, ngsr_shutdown, ngsr_newhook, NULL, ngsr_connect, ngsr_rcvdata, ngsr_disconnect, NULL }; static int ngsr_done_init = 0; #endif /* NETGRAPH */ /* * Register the ports on the adapter. * Fill in the info for each port. #ifndef NETGRAPH * Attach each port to sppp and bpf. #endif */ int sr_attach(device_t device) { int intf_sw, pndx; u_int32_t flags; u_int fecr, *fecrp; struct sr_hardc *hc; struct sr_softc *sc; #ifndef NETGRAPH struct ifnet *ifp; #endif /* NETGRAPH */ int unit; /* index: channel w/in card */ hc = (struct sr_hardc *)device_get_softc(device); MALLOC(sc, struct sr_softc *, hc->numports * sizeof(struct sr_softc), M_DEVBUF, M_WAITOK | M_ZERO); if (sc == NULL) goto errexit; hc->sc = sc; /* * Get the TX clock direction and configuration. The default is a * single external clock which is used by RX and TX. */ switch(hc->cardtype) { case SR_CRD_N2: flags = device_get_flags(device); #ifdef N2_TEST_SPEED if (sr_test_speed[0] > 0) hc->sc[0].clk_cfg = SR_FLAGS_INT_CLK; else #endif if (flags & SR_FLAGS_0_CLK_MSK) hc->sc[0].clk_cfg = (flags & SR_FLAGS_0_CLK_MSK) >> SR_FLAGS_CLK_SHFT; if (hc->numports == 2) #ifdef N2_TEST_SPEED if (sr_test_speed[1] > 0) hc->sc[0].clk_cfg = SR_FLAGS_INT_CLK; else #endif if (flags & SR_FLAGS_1_CLK_MSK) hc->sc[1].clk_cfg = (flags & SR_FLAGS_1_CLK_MSK) >> (SR_FLAGS_CLK_SHFT + SR_FLAGS_CLK_CHAN_SHFT); break; case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); fecr = *fecrp; for (pndx = 0; pndx < hc->numports; pndx++, sc++) { switch (pndx) { case 1: intf_sw = fecr & SR_FECR_ID1 >> SR_FE_ID1_SHFT; break; case 0: default: intf_sw = fecr & SR_FECR_ID0 >> SR_FE_ID0_SHFT; } #ifdef N2_TEST_SPEED if (sr_test_speed[pndx] > 0) sc->clk_cfg = SR_FLAGS_INT_CLK; else #endif switch (intf_sw) { default: case SR_FE_ID_RS232: case SR_FE_ID_HSSI: case SR_FE_ID_RS422: case SR_FE_ID_TEST: break; case SR_FE_ID_V35: sc->clk_cfg = SR_FLAGS_EXT_SEP_CLK; break; case SR_FE_ID_X21: sc->clk_cfg = SR_FLAGS_EXT_CLK; break; } } sc = hc->sc; break; } /* * Report Card configuration information before we start configuring * each channel on the card... */ printf("src%d: %uK RAM (%d mempages) @ %p-%p, %u ports.\n", hc->cunit, hc->memsize / 1024, hc->mempages, hc->mem_start, hc->mem_end, hc->numports); src_init(hc); sr_init_sca(hc); if (BUS_SETUP_INTR(device_get_parent(device), device, hc->res_irq, INTR_TYPE_NET, srintr, hc, &hc->intr_cookie) != 0) goto errexit; /* * Now configure each port on the card. */ for (unit = 0; unit < hc->numports; sc++, unit++) { sc->hc = hc; sc->subunit = unit; sc->unit = next_sc_unit; next_sc_unit++; sc->scachan = unit % NCHAN; sr_init_rx_dmac(sc); sr_init_tx_dmac(sc); sr_init_msci(sc); printf("sr%d: Adapter %d, port %d.\n", sc->unit, hc->cunit, sc->subunit); #ifndef NETGRAPH ifp = &sc->ifsppp.pp_if; ifp->if_softc = sc; ifp->if_unit = sc->unit; ifp->if_name = "sr"; ifp->if_mtu = PP_MTU; ifp->if_flags = IFF_POINTOPOINT | IFF_MULTICAST; ifp->if_ioctl = srioctl; ifp->if_start = srstart; ifp->if_watchdog = srwatchdog; sc->ifsppp.pp_flags = PP_KEEPALIVE; sppp_attach((struct ifnet *)&sc->ifsppp); if_attach(ifp); bpfattach(ifp, DLT_PPP, PPP_HEADER_LEN); #else /* NETGRAPH */ /* * we have found a node, make sure our 'type' is availabe. */ if (ngsr_done_init == 0) ngsr_init(NULL); if (ng_make_node_common(&typestruct, &sc->node) != 0) goto errexit; sprintf(sc->nodename, "%s%d", NG_SR_NODE_TYPE, sc->unit); if (ng_name_node(sc->node, sc->nodename)) { NG_NODE_UNREF(sc->node); /* make it go away again */ goto errexit; } NG_NODE_SET_PRIVATE(sc->node, sc); callout_handle_init(&sc->handle); sc->xmitq.ifq_maxlen = IFQ_MAXLEN; sc->xmitq_hipri.ifq_maxlen = IFQ_MAXLEN; mtx_init(&sc->xmitq.ifq_mtx, "sr_xmitq", NULL, MTX_DEF); mtx_init(&sc->xmitq_hipri.ifq_mtx, "sr_xmitq_hipri", NULL, MTX_DEF); sc->running = 0; #endif /* NETGRAPH */ } if (hc->mempages) SRC_SET_OFF(hc->iobase); return (0); errexit: sr_deallocate_resources(device); return (ENXIO); } int sr_detach(device_t device) { device_t parent = device_get_parent(device); struct sr_hardc *hc = device_get_softc(device); if (hc->intr_cookie != NULL) { if (BUS_TEARDOWN_INTR(parent, device, hc->res_irq, hc->intr_cookie) != 0) { printf("intr teardown failed.. continuing\n"); } hc->intr_cookie = NULL; } /* XXX Stop the DMA. */ /* * deallocate any system resources we may have * allocated on behalf of this driver. */ FREE(hc->sc, M_DEVBUF); hc->sc = NULL; hc->mem_start = NULL; return (sr_deallocate_resources(device)); } int sr_allocate_ioport(device_t device, int rid, u_long size) { struct sr_hardc *hc = device_get_softc(device); hc->rid_ioport = rid; hc->res_ioport = bus_alloc_resource(device, SYS_RES_IOPORT, &hc->rid_ioport, 0ul, ~0ul, size, RF_ACTIVE); if (hc->res_ioport == NULL) { goto errexit; } return (0); errexit: sr_deallocate_resources(device); return (ENXIO); } int sr_allocate_irq(device_t device, int rid, u_long size) { struct sr_hardc *hc = device_get_softc(device); hc->rid_irq = rid; hc->res_irq = bus_alloc_resource(device, SYS_RES_IRQ, &hc->rid_irq, 0ul, ~0ul, 1, RF_SHAREABLE|RF_ACTIVE); if (hc->res_irq == NULL) { goto errexit; } return (0); errexit: sr_deallocate_resources(device); return (ENXIO); } int sr_allocate_memory(device_t device, int rid, u_long size) { struct sr_hardc *hc = device_get_softc(device); hc->rid_memory = rid; hc->res_memory = bus_alloc_resource(device, SYS_RES_MEMORY, &hc->rid_memory, 0ul, ~0ul, size, RF_ACTIVE); if (hc->res_memory == NULL) { goto errexit; } return (0); errexit: sr_deallocate_resources(device); return (ENXIO); } int sr_allocate_plx_memory(device_t device, int rid, u_long size) { struct sr_hardc *hc = device_get_softc(device); hc->rid_plx_memory = rid; hc->res_plx_memory = bus_alloc_resource(device, SYS_RES_MEMORY, &hc->rid_plx_memory, 0ul, ~0ul, size, RF_ACTIVE); if (hc->res_plx_memory == NULL) { goto errexit; } return (0); errexit: sr_deallocate_resources(device); return (ENXIO); } int sr_deallocate_resources(device_t device) { struct sr_hardc *hc = device_get_softc(device); if (hc->res_irq != 0) { bus_deactivate_resource(device, SYS_RES_IRQ, hc->rid_irq, hc->res_irq); bus_release_resource(device, SYS_RES_IRQ, hc->rid_irq, hc->res_irq); hc->res_irq = 0; } if (hc->res_ioport != 0) { bus_deactivate_resource(device, SYS_RES_IOPORT, hc->rid_ioport, hc->res_ioport); bus_release_resource(device, SYS_RES_IOPORT, hc->rid_ioport, hc->res_ioport); hc->res_ioport = 0; } if (hc->res_memory != 0) { bus_deactivate_resource(device, SYS_RES_MEMORY, hc->rid_memory, hc->res_memory); bus_release_resource(device, SYS_RES_MEMORY, hc->rid_memory, hc->res_memory); hc->res_memory = 0; } if (hc->res_plx_memory != 0) { bus_deactivate_resource(device, SYS_RES_MEMORY, hc->rid_plx_memory, hc->res_plx_memory); bus_release_resource(device, SYS_RES_MEMORY, hc->rid_plx_memory, hc->res_plx_memory); hc->res_plx_memory = 0; } return (0); } /* * N2 Interrupt Service Routine * * First figure out which SCA gave the interrupt. * Process it. * See if there is other interrupts pending. * Repeat until there no interrupts remain. */ static void srintr(void *arg) { struct sr_hardc *hc = (struct sr_hardc *)arg; sca_regs *sca = hc->sca; /* MSCI register tree */ u_char isr0, isr1, isr2; /* interrupt statii captured */ #if BUGGY > 1 printf("sr: srintr_hc(hc=%08x)\n", hc); #endif /* * Since multiple interfaces may share this interrupt, we must loop * until no interrupts are still pending service. */ while (1) { /* * Read all three interrupt status registers from the N2 * card... */ isr0 = SRC_GET8(hc->sca_base, sca->isr0); isr1 = SRC_GET8(hc->sca_base, sca->isr1); isr2 = SRC_GET8(hc->sca_base, sca->isr2); /* * If all three registers returned 0, we've finished * processing interrupts from this device, so we can quit * this loop... */ if ((isr0 | isr1 | isr2) == 0) break; #if BUGGY > 2 printf("src%d: srintr_hc isr0 %x, isr1 %x, isr2 %x\n", #ifndef NETGRAPH unit, isr0, isr1, isr2); #else hc->cunit, isr0, isr1, isr2); #endif /* NETGRAPH */ #endif /* * Now we can dispatch the interrupts. Since we don't expect * either MSCI or timer interrupts, we'll test for DMA * interrupts first... */ if (isr1) /* DMA-initiated interrupt */ sr_dmac_intr(hc, isr1); if (isr0) /* serial part IRQ? */ sr_msci_intr(hc, isr0); if (isr2) /* timer-initiated interrupt */ sr_timer_intr(hc, isr2); } } /* * This will only start the transmitter. It is assumed that the data * is already there. * It is normally called from srstart() or sr_dmac_intr(). */ static void sr_xmit(struct sr_softc *sc) { u_short cda_value; /* starting descriptor */ u_short eda_value; /* ending descriptor */ struct sr_hardc *hc; #ifndef NETGRAPH struct ifnet *ifp; /* O/S Network Services */ #endif /* NETGRAPH */ dmac_channel *dmac; /* DMA channel registers */ #if BUGGY > 0 printf("sr: sr_xmit( sc=%08x)\n", sc); #endif hc = sc->hc; #ifndef NETGRAPH ifp = &sc->ifsppp.pp_if; #endif /* NETGRAPH */ dmac = &hc->sca->dmac[DMAC_TXCH(sc->scachan)]; /* * Get the starting and ending addresses of the chain to be * transmitted and pass these on to the DMA engine on-chip. */ cda_value = sc->block[sc->txb_next_tx].txdesc + hc->mem_pstart; cda_value &= 0x00ffff; eda_value = sc->block[sc->txb_next_tx].txeda + hc->mem_pstart; eda_value &= 0x00ffff; SRC_PUT16(hc->sca_base, dmac->cda, cda_value); SRC_PUT16(hc->sca_base, dmac->eda, eda_value); /* * Now we'll let the DMA status register know about this change */ SRC_PUT8(hc->sca_base, dmac->dsr, SCA_DSR_DE); sc->xmit_busy = 1; /* mark transmitter busy */ #if BUGGY > 2 printf("sr%d: XMIT cda=%04x, eda=%4x, rcda=%08lx\n", sc->unit, cda_value, eda_value, sc->block[sc->txb_next_tx].txdesc + hc->mem_pstart); #endif sc->txb_next_tx++; /* update next transmit seq# */ if (sc->txb_next_tx == SR_TX_BLOCKS) /* handle wrap... */ sc->txb_next_tx = 0; #ifndef NETGRAPH /* * Finally, we'll set a timout (which will start srwatchdog()) * within the O/S network services layer... */ ifp->if_timer = 2; /* Value in seconds. */ #else /* * Don't time out for a while. */ sc->out_dog = DOG_HOLDOFF; /* give ourself some breathing space*/ #endif /* NETGRAPH */ } /* * This function will be called from the upper level when a user add a * packet to be send, and from the interrupt handler after a finished * transmit. * * NOTE: it should run at spl_imp(). * * This function only place the data in the oncard buffers. It does not * start the transmition. sr_xmit() does that. * * Transmitter idle state is indicated by the IFF_OACTIVE flag. * The function that clears that should ensure that the transmitter * and its DMA is in a "good" idle state. */ #ifndef NETGRAPH static void srstart(struct ifnet *ifp) { struct sr_softc *sc; /* channel control structure */ #else static void srstart(struct sr_softc *sc) { #endif /* NETGRAPH */ struct sr_hardc *hc; /* card control/config block */ int len; /* total length of a packet */ int pkts; /* packets placed in DPRAM */ int tlen; /* working length of pkt */ u_int i; struct mbuf *mtx; /* message buffer from O/S */ u_char *txdata; /* buffer address in DPRAM */ sca_descriptor *txdesc; /* working descriptor pointr */ struct buf_block *blkp; #ifndef NETGRAPH #if BUGGY > 0 printf("sr: srstart( ifp=%08x)\n", ifp); #endif sc = ifp->if_softc; if ((ifp->if_flags & IFF_RUNNING) == 0) return; #endif /* NETGRAPH */ hc = sc->hc; /* * It is OK to set the memory window outside the loop because all tx * buffers and descriptors are assumed to be in the same 16K window. */ if (hc->mempages) { SRC_SET_ON(hc->iobase); SRC_SET_MEM(hc->iobase, sc->block[0].txdesc); } /* * Loop to place packets into DPRAM. * * We stay in this loop until there is nothing in * the TX queue left or the tx buffers are full. */ top_srstart: /* * See if we have space for more packets. */ if (sc->txb_inuse == SR_TX_BLOCKS) { /* out of space? */ #ifndef NETGRAPH ifp->if_flags |= IFF_OACTIVE; /* yes, mark active */ #else /*ifp->if_flags |= IFF_OACTIVE;*/ /* yes, mark active */ #endif /* NETGRAPH */ if (hc->mempages) SRC_SET_OFF(hc->iobase); #if BUGGY > 9 printf("sr%d.srstart: sc->txb_inuse=%d; DPRAM full...\n", sc->unit, sc->txb_inuse); #endif return; } /* * OK, the card can take more traffic. Let's see if there's any * pending from the system... * * NOTE: * The architecture of the networking interface doesn't * actually call us like 'write()', providing an address. We get * started, a lot like a disk strategy routine, and we actually call * back out to the system to get traffic to send... * * NOTE: * If we were gonna run through another layer, we would use a * dispatch table to select the service we're getting a packet * from... */ #ifndef NETGRAPH mtx = sppp_dequeue(ifp); #else /* NETGRAPH */ IF_DEQUEUE(&sc->xmitq_hipri, mtx); if (mtx == NULL) { IF_DEQUEUE(&sc->xmitq, mtx); } #endif /* NETGRAPH */ if (!mtx) { if (hc->mempages) SRC_SET_OFF(hc->iobase); return; } /* * OK, we got a packet from the network services of the O/S. Now we * can move it into the DPRAM (under control of the descriptors) and * fire it off... */ pkts = 0; i = 0; /* counts # of granules used */ blkp = &sc->block[sc->txb_new]; /* address of free granule */ txdesc = (sca_descriptor *) (hc->mem_start + (blkp->txdesc & hc->winmsk)); txdata = (u_char *)(hc->mem_start + (blkp->txstart & hc->winmsk)); /* * Now we'll try to install as many packets as possible into the * card's DP RAM buffers. */ for (;;) { /* perform actual copy of packet */ len = mtx->m_pkthdr.len; /* length of message */ #if BUGGY > 1 printf("sr%d.srstart: mbuf @ %08lx, %d bytes\n", sc->unit, mtx, len); #endif #ifndef NETGRAPH if (ifp->if_bpf) bpf_mtap(ifp, mtx); #else /* NETGRAPH */ sc->outbytes += len; #endif /* NETGRAPH */ /* * We can perform a straight copy because the tranmit * buffers won't wrap. */ m_copydata(mtx, 0, len, txdata); /* * Now we know how big the message is gonna be. We must now * construct the descriptors to drive this message out... */ tlen = len; while (tlen > SR_BUF_SIZ) { /* loop for full granules */ txdesc->stat = 0; /* reset bits */ txdesc->len = SR_BUF_SIZ; /* size of granule */ tlen -= SR_BUF_SIZ; txdesc++; /* move to next dscr */ txdata += SR_BUF_SIZ; /* adjust data addr */ i++; } /* * This section handles the setting of the final piece of a * message. */ txdesc->stat = SCA_DESC_EOM; txdesc->len = tlen; pkts++; /* * prepare for subsequent packets (if any) */ txdesc++; txdata += SR_BUF_SIZ; /* next mem granule */ i++; /* count of granules */ /* * OK, we've now placed the message into the DPRAM where it * can be transmitted. We'll now release the message memory * and update the statistics... */ m_freem(mtx); #ifndef NETGRAPH ++sc->ifsppp.pp_if.if_opackets; #else /* NETGRAPH */ sc->opackets++; #endif /* NETGRAPH */ /* * Check if we have space for another packet. XXX This is * hardcoded. A packet can't be larger than 3 buffers (3 x * 512). */ if ((i + 3) >= blkp->txmax) { /* enough remains? */ #if BUGGY > 9 printf("sr%d.srstart: i=%d (%d pkts); card full.\n", sc->unit, i, pkts); #endif break; } /* * We'll pull the next message to be sent (if any) */ #ifndef NETGRAPH mtx = sppp_dequeue(ifp); #else /* NETGRAPH */ IF_DEQUEUE(&sc->xmitq_hipri, mtx); if (mtx == NULL) { IF_DEQUEUE(&sc->xmitq, mtx); } #endif /* NETGRAPH */ if (!mtx) { /* no message? We're done! */ #if BUGGY > 9 printf("sr%d.srstart: pending=0, pkts=%d\n", sc->unit, pkts); #endif break; } } blkp->txtail = i; /* record next free granule */ /* * Mark the last descriptor, so that the SCA know where to stop. */ txdesc--; /* back up to last descriptor in list */ txdesc->stat |= SCA_DESC_EOT; /* mark as end of list */ /* * Now we'll reset the transmit granule's descriptor address so we * can record this in the structure and fire it off w/ the DMA * processor of the serial chip... */ txdesc = (sca_descriptor *)(uintptr_t)blkp->txdesc; blkp->txeda = (u_short)((uintptr_t)&txdesc[i]); sc->txb_inuse++; /* update inuse status */ sc->txb_new++; /* new traffic wuz added */ if (sc->txb_new == SR_TX_BLOCKS) sc->txb_new = 0; /* * If the tranmitter wasn't marked as "busy" we will force it to be * started... */ if (sc->xmit_busy == 0) { sr_xmit(sc); #if BUGGY > 9 printf("sr%d.srstart: called sr_xmit()\n", sc->unit); #endif } goto top_srstart; } #ifndef NETGRAPH /* * Handle ioctl's at the device level, though we *will* call up * a layer... */ #if BUGGY > 2 static int bug_splats[] = {0, 0, 0, 0, 0, 0, 0, 0}; #endif static int srioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { int s, error, was_up, should_be_up; struct sr_softc *sc = ifp->if_softc; #if BUGGY > 0 if_printf(ifp, "srioctl(ifp=%08x, cmd=%08x, data=%08x)\n", ifp, cmd, data); #endif was_up = ifp->if_flags & IFF_RUNNING; error = sppp_ioctl(ifp, cmd, data); #if BUGGY > 1 if_printf(ifp, "ioctl: ifsppp.pp_flags = %08x, if_flags %08x.\n", ((struct sppp *)ifp)->pp_flags, ifp->if_flags); #endif if (error) return error; if ((cmd != SIOCSIFFLAGS) && (cmd != SIOCSIFADDR)) { #if BUGGY > 2 if (bug_splats[sc->unit]++ < 2) { printf("sr(%d).if_addrlist = %08x\n", sc->unit, ifp->if_addrlist); printf("sr(%d).if_bpf = %08x\n", sc->unit, ifp->if_bpf); printf("sr(%d).if_init = %08x\n", sc->unit, ifp->if_init); printf("sr(%d).if_output = %08x\n", sc->unit, ifp->if_output); printf("sr(%d).if_start = %08x\n", sc->unit, ifp->if_start); printf("sr(%d).if_done = %08x\n", sc->unit, ifp->if_done); printf("sr(%d).if_ioctl = %08x\n", sc->unit, ifp->if_ioctl); printf("sr(%d).if_reset = %08x\n", sc->unit, ifp->if_reset); printf("sr(%d).if_watchdog = %08x\n", sc->unit, ifp->if_watchdog); } #endif return 0; } s = splimp(); should_be_up = ifp->if_flags & IFF_RUNNING; if (!was_up && should_be_up) { /* * Interface should be up -- start it. */ sr_up(sc); srstart(ifp); /* * XXX Clear the IFF_UP flag so that the link will only go * up after sppp lcp and ipcp negotiation. */ /* ifp->if_flags &= ~IFF_UP; */ } else if (was_up && !should_be_up) { /* * Interface should be down -- stop it. */ sr_down(sc); sppp_flush(ifp); } splx(s); return 0; } #endif /* NETGRAPH */ /* * This is to catch lost tx interrupts. */ static void #ifndef NETGRAPH srwatchdog(struct ifnet *ifp) #else srwatchdog(struct sr_softc *sc) #endif /* NETGRAPH */ { int got_st0, got_st1, got_st3, got_dsr; #ifndef NETGRAPH struct sr_softc *sc = ifp->if_softc; #endif /* NETGRAPH */ struct sr_hardc *hc = sc->hc; msci_channel *msci = &hc->sca->msci[sc->scachan]; dmac_channel *dmac = &sc->hc->sca->dmac[sc->scachan]; #if BUGGY > 0 #ifndef NETGRAPH printf("srwatchdog(unit=%d)\n", unit); #else printf("srwatchdog(unit=%d)\n", sc->unit); #endif /* NETGRAPH */ #endif #ifndef NETGRAPH if (!(ifp->if_flags & IFF_RUNNING)) return; ifp->if_oerrors++; /* update output error count */ #else /* NETGRAPH */ sc->oerrors++; /* update output error count */ #endif /* NETGRAPH */ got_st0 = SRC_GET8(hc->sca_base, msci->st0); got_st1 = SRC_GET8(hc->sca_base, msci->st1); got_st3 = SRC_GET8(hc->sca_base, msci->st3); got_dsr = SRC_GET8(hc->sca_base, dmac->dsr); #ifndef NETGRAPH #if 0 if (ifp->if_flags & IFF_DEBUG) #endif printf("sr%d: transmit failed, " #else /* NETGRAPH */ printf("sr%d: transmit failed, " #endif /* NETGRAPH */ "ST0 %02x, ST1 %02x, ST3 %02x, DSR %02x.\n", sc->unit, got_st0, got_st1, got_st3, got_dsr); if (SRC_GET8(hc->sca_base, msci->st1) & SCA_ST1_UDRN) { SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXABORT); SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXENABLE); SRC_PUT8(hc->sca_base, msci->st1, SCA_ST1_UDRN); } sc->xmit_busy = 0; #ifndef NETGRAPH ifp->if_flags &= ~IFF_OACTIVE; #else /*ifp->if_flags &= ~IFF_OACTIVE; */ #endif /* NETGRAPH */ if (sc->txb_inuse && --sc->txb_inuse) sr_xmit(sc); #ifndef NETGRAPH srstart(ifp); /* restart transmitter */ #else srstart(sc); /* restart transmitter */ #endif /* NETGRAPH */ } static void sr_up(struct sr_softc *sc) { u_int *fecrp; struct sr_hardc *hc = sc->hc; sca_regs *sca = hc->sca; msci_channel *msci = &sca->msci[sc->scachan]; #if BUGGY > 0 printf("sr_up(sc=%08x)\n", sc); #endif /* * Enable transmitter and receiver. Raise DTR and RTS. Enable * interrupts. * * XXX What about using AUTO mode in msci->md0 ??? */ SRC_PUT8(hc->sca_base, msci->ctl, SRC_GET8(hc->sca_base, msci->ctl) & ~SCA_CTL_RTS); if (sc->scachan == 0) switch (hc->cardtype) { case SR_CRD_N2: outb(hc->iobase + SR_MCR, (inb(hc->iobase + SR_MCR) & ~SR_MCR_DTR0)); break; case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); *fecrp &= ~SR_FECR_DTR0; break; } else switch (hc->cardtype) { case SR_CRD_N2: outb(hc->iobase + SR_MCR, (inb(hc->iobase + SR_MCR) & ~SR_MCR_DTR1)); break; case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); *fecrp &= ~SR_FECR_DTR1; break; } if (sc->scachan == 0) { SRC_PUT8(hc->sca_base, sca->ier0, SRC_GET8(hc->sca_base, sca->ier0) | 0x000F); SRC_PUT8(hc->sca_base, sca->ier1, SRC_GET8(hc->sca_base, sca->ier1) | 0x000F); } else { SRC_PUT8(hc->sca_base, sca->ier0, SRC_GET8(hc->sca_base, sca->ier0) | 0x00F0); SRC_PUT8(hc->sca_base, sca->ier1, SRC_GET8(hc->sca_base, sca->ier1) | 0x00F0); } SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RXENABLE); inb(hc->iobase); /* XXX slow it down a bit. */ SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXENABLE); #ifndef NETGRAPH #ifdef USE_MODEMCK if (sr_watcher == 0) sr_modemck(NULL); #endif #else /* NETGRAPH */ untimeout(ngsr_watchdog_frame, sc, sc->handle); sc->handle = timeout(ngsr_watchdog_frame, sc, hz); sc->running = 1; #endif /* NETGRAPH */ } static void sr_down(struct sr_softc *sc) { u_int *fecrp; struct sr_hardc *hc = sc->hc; sca_regs *sca = hc->sca; msci_channel *msci = &sca->msci[sc->scachan]; #if BUGGY > 0 printf("sr_down(sc=%08x)\n", sc); #endif #ifdef NETGRAPH untimeout(ngsr_watchdog_frame, sc, sc->handle); sc->running = 0; #endif /* NETGRAPH */ /* * Disable transmitter and receiver. Lower DTR and RTS. Disable * interrupts. */ SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RXDISABLE); inb(hc->iobase); /* XXX slow it down a bit. */ SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXDISABLE); SRC_PUT8(hc->sca_base, msci->ctl, SRC_GET8(hc->sca_base, msci->ctl) | SCA_CTL_RTS); if (sc->scachan == 0) switch (hc->cardtype) { case SR_CRD_N2: outb(hc->iobase + SR_MCR, (inb(hc->iobase + SR_MCR) | SR_MCR_DTR0)); break; case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); *fecrp |= SR_FECR_DTR0; break; } else switch (hc->cardtype) { case SR_CRD_N2: outb(hc->iobase + SR_MCR, (inb(hc->iobase + SR_MCR) | SR_MCR_DTR1)); break; case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); *fecrp |= SR_FECR_DTR1; break; } if (sc->scachan == 0) { SRC_PUT8(hc->sca_base, sca->ier0, SRC_GET8(hc->sca_base, sca->ier0) & ~0x0F); SRC_PUT8(hc->sca_base, sca->ier1, SRC_GET8(hc->sca_base, sca->ier1) & ~0x0F); } else { SRC_PUT8(hc->sca_base, sca->ier0, SRC_GET8(hc->sca_base, sca->ier0) & ~0xF0); SRC_PUT8(hc->sca_base, sca->ier1, SRC_GET8(hc->sca_base, sca->ier1) & ~0xF0); } } /* * Initialize the card, allocate memory for the sr_softc structures * and fill in the pointers. */ static void src_init(struct sr_hardc *hc) { struct sr_softc *sc = hc->sc; int x; u_int chanmem; u_int bufmem; u_int next; u_int descneeded; #if BUGGY > 0 printf("src_init(hc=%08x)\n", hc); #endif chanmem = hc->memsize / hc->numports; next = 0; for (x = 0; x < hc->numports; x++, sc++) { int blk; for (blk = 0; blk < SR_TX_BLOCKS; blk++) { sc->block[blk].txdesc = next; bufmem = (16 * 1024) / SR_TX_BLOCKS; descneeded = bufmem / SR_BUF_SIZ; sc->block[blk].txstart = sc->block[blk].txdesc + ((((descneeded * sizeof(sca_descriptor)) / SR_BUF_SIZ) + 1) * SR_BUF_SIZ); sc->block[blk].txend = next + bufmem; sc->block[blk].txmax = (sc->block[blk].txend - sc->block[blk].txstart) / SR_BUF_SIZ; next += bufmem; #if BUGGY > 2 printf("sr%d: blk %d: txdesc %08x, txstart %08x\n", sc->unit, blk, sc->block[blk].txdesc, sc->block[blk].txstart); #endif } sc->rxdesc = next; bufmem = chanmem - (bufmem * SR_TX_BLOCKS); descneeded = bufmem / SR_BUF_SIZ; sc->rxstart = sc->rxdesc + ((((descneeded * sizeof(sca_descriptor)) / SR_BUF_SIZ) + 1) * SR_BUF_SIZ); sc->rxend = next + bufmem; sc->rxmax = (sc->rxend - sc->rxstart) / SR_BUF_SIZ; next += bufmem; } } /* * The things done here are channel independent. * * Configure the sca waitstates. * Configure the global interrupt registers. * Enable master dma enable. */ static void sr_init_sca(struct sr_hardc *hc) { sca_regs *sca = hc->sca; #if BUGGY > 0 printf("sr_init_sca(hc=%08x)\n", hc); #endif /* * Do the wait registers. Set everything to 0 wait states. */ SRC_PUT8(hc->sca_base, sca->pabr0, 0); SRC_PUT8(hc->sca_base, sca->pabr1, 0); SRC_PUT8(hc->sca_base, sca->wcrl, 0); SRC_PUT8(hc->sca_base, sca->wcrm, 0); SRC_PUT8(hc->sca_base, sca->wcrh, 0); /* * Configure the interrupt registers. Most are cleared until the * interface is configured. */ SRC_PUT8(hc->sca_base, sca->ier0, 0x00); /* MSCI interrupts. */ SRC_PUT8(hc->sca_base, sca->ier1, 0x00); /* DMAC interrupts */ SRC_PUT8(hc->sca_base, sca->ier2, 0x00); /* TIMER interrupts. */ SRC_PUT8(hc->sca_base, sca->itcr, 0x00); /* Use ivr and no intr * ack */ SRC_PUT8(hc->sca_base, sca->ivr, 0x40); /* Interrupt vector. */ SRC_PUT8(hc->sca_base, sca->imvr, 0x40); /* * Configure the timers. XXX Later */ /* * Set the DMA channel priority to rotate between all four channels. * * Enable all dma channels. */ SRC_PUT8(hc->sca_base, sca->pcr, SCA_PCR_PR2); SRC_PUT8(hc->sca_base, sca->dmer, SCA_DMER_EN); } /* * Configure the msci * * NOTE: The serial port configuration is hardcoded at the moment. */ static void sr_init_msci(struct sr_softc *sc) { int portndx; /* on-board port number */ u_int mcr_v; /* contents of modem control */ u_int *fecrp; /* pointer for PCI's MCR i/o */ struct sr_hardc *hc = sc->hc; msci_channel *msci = &hc->sca->msci[sc->scachan]; #ifdef N2_TEST_SPEED int br_v; /* contents for BR divisor */ int etcndx; /* index into ETC table */ int fifo_v, gotspeed; /* final tabled speed found */ int tmc_v; /* timer control register */ int wanted; /* speed (bitrate) wanted... */ struct rate_line *rtp; #endif portndx = sc->scachan; #if BUGGY > 0 printf("sr: sr_init_msci( sc=%08x)\n", sc); #endif SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RESET); SRC_PUT8(hc->sca_base, msci->md0, SCA_MD0_CRC_1 | SCA_MD0_CRC_CCITT | SCA_MD0_CRC_ENABLE | SCA_MD0_MODE_HDLC); SRC_PUT8(hc->sca_base, msci->md1, SCA_MD1_NOADDRCHK); SRC_PUT8(hc->sca_base, msci->md2, SCA_MD2_DUPLEX | SCA_MD2_NRZ); /* * According to the manual I should give a reset after changing the * mode registers. */ SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RXRESET); SRC_PUT8(hc->sca_base, msci->ctl, SCA_CTL_IDLPAT | SCA_CTL_UDRNC | SCA_CTL_RTS); /* * XXX Later we will have to support different clock settings. */ switch (sc->clk_cfg) { default: #if BUGGY > 0 printf("sr%: clk_cfg=%08x, selected default clock.\n", portndx, sc->clk_cfg); #endif /* FALLTHROUGH */ case SR_FLAGS_EXT_CLK: /* * For now all interfaces are programmed to use the RX clock * for the TX clock. */ #if BUGGY > 0 printf("sr%d: External Clock Selected.\n", portndx); #endif SRC_PUT8(hc->sca_base, msci->rxs, SCA_RXS_CLK_RXC0 | SCA_RXS_DIV1); SRC_PUT8(hc->sca_base, msci->txs, SCA_TXS_CLK_RX | SCA_TXS_DIV1); break; case SR_FLAGS_EXT_SEP_CLK: #if BUGGY > 0 printf("sr%d: Split Clocking Selected.\n", portndx); #endif SRC_PUT8(hc->sca_base, msci->rxs, SCA_RXS_CLK_RXC0 | SCA_RXS_DIV1); SRC_PUT8(hc->sca_base, msci->txs, SCA_TXS_CLK_TXC | SCA_TXS_DIV1); break; case SR_FLAGS_INT_CLK: #if BUGGY > 0 printf("sr%d: Internal Clocking selected.\n", portndx); #endif /* * XXX I do need some code to set the baud rate here! */ #ifdef N2_TEST_SPEED switch (hc->cardtype) { case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); mcr_v = *fecrp; etcndx = 2; break; case SR_CRD_N2: default: mcr_v = inb(hc->iobase + SR_MCR); etcndx = 0; } fifo_v = 0x10; /* stolen from Linux version */ /* * search for appropriate speed in table, don't calc it: */ wanted = sr_test_speed[portndx]; rtp = &n2_rates[0]; /* point to first table item */ while ((rtp->target > 0) /* search table for speed */ &&(rtp->target != wanted)) rtp++; /* * We've searched the table for a matching speed. If we've * found the correct rate line, we'll get the pre-calc'd * values for the TMC and baud rate divisor for subsequent * use... */ if (rtp->target > 0) { /* use table-provided values */ gotspeed = wanted; tmc_v = rtp->tmc_reg; br_v = rtp->br_reg; } else { /* otherwise assume 1MBit comm rate */ gotspeed = 10000; tmc_v = 5; br_v = 1; } /* * Now we mask in the enable clock output for the MCR: */ mcr_v |= etc0vals[etcndx + portndx]; /* * Now we'll program the registers with these speed- related * contents... */ SRC_PUT8(hc->sca_base, msci->tmc, tmc_v); SRC_PUT8(hc->sca_base, msci->trc0, fifo_v); SRC_PUT8(hc->sca_base, msci->rxs, SCA_RXS_CLK_INT + br_v); SRC_PUT8(hc->sca_base, msci->txs, SCA_TXS_CLK_INT + br_v); switch (hc->cardtype) { case SR_CRD_N2PCI: *fecrp = mcr_v; break; case SR_CRD_N2: default: outb(hc->iobase + SR_MCR, mcr_v); } #if BUGGY > 0 if (wanted != gotspeed) printf("sr%d: Speed wanted=%d, found=%d\n", wanted, gotspeed); printf("sr%d: Internal Clock %dx100 BPS, tmc=%d, div=%d\n", portndx, gotspeed, tmc_v, br_v); #endif #else SRC_PUT8(hc->sca_base, msci->rxs, SCA_RXS_CLK_INT | SCA_RXS_DIV1); SRC_PUT8(hc->sca_base, msci->txs, SCA_TXS_CLK_INT | SCA_TXS_DIV1); SRC_PUT8(hc->sca_base, msci->tmc, 5); if (portndx == 0) switch (hc->cardtype) { case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); *fecrp |= SR_FECR_ETC0; break; case SR_CRD_N2: default: mcr_v = inb(hc->iobase + SR_MCR); mcr_v |= SR_MCR_ETC0; outb(hc->iobase + SR_MCR, mcr_v); } else switch (hc->cardtype) { case SR_CRD_N2: mcr_v = inb(hc->iobase + SR_MCR); mcr_v |= SR_MCR_ETC1; outb(hc->iobase + SR_MCR, mcr_v); break; case SR_CRD_N2PCI: fecrp = (u_int *)(hc->sca_base + SR_FECR); *fecrp |= SR_FECR_ETC1; break; } #endif } /* * XXX Disable all interrupts for now. I think if you are using the * dmac you don't use these interrupts. */ SRC_PUT8(hc->sca_base, msci->ie0, 0); SRC_PUT8(hc->sca_base, msci->ie1, 0x0C); SRC_PUT8(hc->sca_base, msci->ie2, 0); SRC_PUT8(hc->sca_base, msci->fie, 0); SRC_PUT8(hc->sca_base, msci->sa0, 0); SRC_PUT8(hc->sca_base, msci->sa1, 0); SRC_PUT8(hc->sca_base, msci->idl, 0x7E); /* set flags value */ SRC_PUT8(hc->sca_base, msci->rrc, 0x0E); SRC_PUT8(hc->sca_base, msci->trc0, 0x10); SRC_PUT8(hc->sca_base, msci->trc1, 0x1F); } /* * Configure the rx dma controller. */ static void sr_init_rx_dmac(struct sr_softc *sc) { struct sr_hardc *hc; dmac_channel *dmac; sca_descriptor *rxd; u_int cda_v, sarb_v, rxbuf, rxda, rxda_d; #if BUGGY > 0 printf("sr_init_rx_dmac(sc=%08x)\n", sc); #endif hc = sc->hc; dmac = &hc->sca->dmac[DMAC_RXCH(sc->scachan)]; if (hc->mempages) SRC_SET_MEM(hc->iobase, sc->rxdesc); /* * This phase initializes the contents of the descriptor table * needed to construct a circular buffer... */ rxd = (sca_descriptor *)(hc->mem_start + (sc->rxdesc & hc->winmsk)); rxda_d = (uintptr_t) hc->mem_start - (sc->rxdesc & ~hc->winmsk); for (rxbuf = sc->rxstart; rxbuf < sc->rxend; rxbuf += SR_BUF_SIZ, rxd++) { /* * construct the circular chain... */ rxda = (uintptr_t) &rxd[1] - rxda_d + hc->mem_pstart; rxd->cp = (u_short)(rxda & 0xffff); /* * set the on-card buffer address... */ rxd->bp = (u_short)((rxbuf + hc->mem_pstart) & 0xffff); rxd->bpb = (u_char)(((rxbuf + hc->mem_pstart) >> 16) & 0xff); rxd->len = 0; /* bytes resident w/in granule */ rxd->stat = 0xff; /* The sca write here when finished */ } /* * heal the chain so that the last entry points to the first... */ rxd--; rxd->cp = (u_short)((sc->rxdesc + hc->mem_pstart) & 0xffff); /* * reset the reception handler's index... */ sc->rxhind = 0; /* * We'll now configure the receiver's DMA logic... */ SRC_PUT8(hc->sca_base, dmac->dsr, 0); /* Disable DMA transfer */ SRC_PUT8(hc->sca_base, dmac->dcr, SCA_DCR_ABRT); /* XXX maybe also SCA_DMR_CNTE */ SRC_PUT8(hc->sca_base, dmac->dmr, SCA_DMR_TMOD | SCA_DMR_NF); SRC_PUT16(hc->sca_base, dmac->bfl, SR_BUF_SIZ); cda_v = (u_short)((sc->rxdesc + hc->mem_pstart) & 0xffff); sarb_v = (u_char)(((sc->rxdesc + hc->mem_pstart) >> 16) & 0xff); SRC_PUT16(hc->sca_base, dmac->cda, cda_v); SRC_PUT8(hc->sca_base, dmac->sarb, sarb_v); rxd = (sca_descriptor *)(uintptr_t)sc->rxstart; SRC_PUT16(hc->sca_base, dmac->eda, (u_short)((uintptr_t) &rxd[sc->rxmax - 1] & 0xffff)); SRC_PUT8(hc->sca_base, dmac->dir, 0xF0); SRC_PUT8(hc->sca_base, dmac->dsr, SCA_DSR_DE); /* Enable DMA */ } /* * Configure the TX DMA descriptors. * Initialize the needed values and chain the descriptors. */ static void sr_init_tx_dmac(struct sr_softc *sc) { int blk; u_int txbuf, txda, txda_d; struct sr_hardc *hc; sca_descriptor *txd; dmac_channel *dmac; struct buf_block *blkp; u_int x; u_int sarb_v; #if BUGGY > 0 printf("sr_init_tx_dmac(sc=%08x)\n", sc); #endif hc = sc->hc; dmac = &hc->sca->dmac[DMAC_TXCH(sc->scachan)]; if (hc->mempages) SRC_SET_MEM(hc->iobase, sc->block[0].txdesc); /* * Initialize the array of descriptors for transmission */ for (blk = 0; blk < SR_TX_BLOCKS; blk++) { blkp = &sc->block[blk]; txd = (sca_descriptor *)(hc->mem_start + (blkp->txdesc & hc->winmsk)); txda_d = (uintptr_t) hc->mem_start - (blkp->txdesc & ~hc->winmsk); x = 0; txbuf = blkp->txstart; for (; txbuf < blkp->txend; txbuf += SR_BUF_SIZ, txd++) { txda = (uintptr_t) &txd[1] - txda_d + hc->mem_pstart; txd->cp = (u_short)(txda & 0xffff); txd->bp = (u_short)((txbuf + hc->mem_pstart) & 0xffff); txd->bpb = (u_char)(((txbuf + hc->mem_pstart) >> 16) & 0xff); txd->len = 0; txd->stat = 0; x++; } txd--; txd->cp = (u_short)((blkp->txdesc + hc->mem_pstart) & 0xffff); blkp->txtail = (uintptr_t)txd - (uintptr_t)hc->mem_start; } SRC_PUT8(hc->sca_base, dmac->dsr, 0); /* Disable DMA */ SRC_PUT8(hc->sca_base, dmac->dcr, SCA_DCR_ABRT); SRC_PUT8(hc->sca_base, dmac->dmr, SCA_DMR_TMOD | SCA_DMR_NF); SRC_PUT8(hc->sca_base, dmac->dir, SCA_DIR_EOT | SCA_DIR_BOF | SCA_DIR_COF); sarb_v = (sc->block[0].txdesc + hc->mem_pstart) >> 16; sarb_v &= 0x00ff; SRC_PUT8(hc->sca_base, dmac->sarb, (u_char) sarb_v); } /* * Look through the descriptors to see if there is a complete packet * available. Stop if we get to where the sca is busy. * * Return the length and status of the packet. * Return nonzero if there is a packet available. * * NOTE: * It seems that we get the interrupt a bit early. The updateing of * descriptor values is not always completed when this is called. */ static int sr_packet_avail(struct sr_softc *sc, int *len, u_char *rxstat) { int granules; /* count of granules in pkt */ int wki, wko; struct sr_hardc *hc; sca_descriptor *rxdesc; /* current descriptor */ sca_descriptor *endp; /* ending descriptor */ sca_descriptor *cda; /* starting descriptor */ hc = sc->hc; /* get card's information */ /* * set up starting descriptor by pulling that info from the DMA half * of the HD chip... */ wki = DMAC_RXCH(sc->scachan); wko = SRC_GET16(hc->sca_base, hc->sca->dmac[wki].cda); cda = (sca_descriptor *)(hc->mem_start + (wko & hc->winmsk)); #if BUGGY > 1 printf("sr_packet_avail(): wki=%d, wko=%04x, cda=%08x\n", wki, wko, cda); #endif /* * open the appropriate memory window and set our expectations... */ if (hc->mempages) { SRC_SET_MEM(hc->iobase, sc->rxdesc); SRC_SET_ON(hc->iobase); } rxdesc = (sca_descriptor *) (hc->mem_start + (sc->rxdesc & hc->winmsk)); endp = rxdesc; rxdesc = &rxdesc[sc->rxhind]; endp = &endp[sc->rxmax]; *len = 0; /* reset result total length */ granules = 0; /* reset count of granules */ /* * This loop will scan descriptors, but it *will* puke up if we wrap * around to our starting point... */ while (rxdesc != cda) { *len += rxdesc->len; /* increment result length */ granules++; /* * If we hit a valid packet's completion we'll know we've * got a live one, and that we can deliver the packet. * Since we're only allowed to report a packet available, * somebody else does that... */ if (rxdesc->stat & SCA_DESC_EOM) { /* End Of Message */ *rxstat = rxdesc->stat; /* return closing */ #if BUGGY > 0 printf("sr%d: PKT AVAIL len %d, %x, bufs %u.\n", sc->unit, *len, *rxstat, granules); #endif return 1; /* indicate success */ } /* * OK, this packet take up multiple granules. Move on to * the next descriptor so we can consider it... */ rxdesc++; if (rxdesc == endp) /* recognize & act on wrap point */ rxdesc = (sca_descriptor *) (hc->mem_start + (sc->rxdesc & hc->winmsk)); } /* * Nothing found in the DPRAM. Let the caller know... */ *len = 0; *rxstat = 0; return 0; } /* * Copy a packet from the on card memory into a provided mbuf. * Take into account that buffers wrap and that a packet may * be larger than a buffer. */ static void sr_copy_rxbuf(struct mbuf *m, struct sr_softc *sc, int len) { struct sr_hardc *hc; sca_descriptor *rxdesc; u_int rxdata; u_int rxmax; u_int off = 0; u_int tlen; #if BUGGY > 0 printf("sr_copy_rxbuf(m=%08x,sc=%08x,len=%d)\n", m, sc, len); #endif hc = sc->hc; rxdata = sc->rxstart + (sc->rxhind * SR_BUF_SIZ); rxmax = sc->rxstart + (sc->rxmax * SR_BUF_SIZ); rxdesc = (sca_descriptor *) (hc->mem_start + (sc->rxdesc & hc->winmsk)); rxdesc = &rxdesc[sc->rxhind]; /* * Using the count of bytes in the received packet, we decrement it * for each granule (controller by an SCA descriptor) to control the * looping... */ while (len) { /* * tlen gets the length of *this* granule... ...which is * then copied to the target buffer. */ tlen = (len < SR_BUF_SIZ) ? len : SR_BUF_SIZ; if (hc->mempages) SRC_SET_MEM(hc->iobase, rxdata); bcopy(hc->mem_start + (rxdata & hc->winmsk), mtod(m, caddr_t) +off, tlen); off += tlen; len -= tlen; /* * now, return to the descriptor's window in DPRAM and reset * the descriptor we've just suctioned... */ if (hc->mempages) SRC_SET_MEM(hc->iobase, sc->rxdesc); rxdesc->len = 0; rxdesc->stat = 0xff; /* * Move on to the next granule. If we've any remaining * bytes to process we'll just continue in our loop... */ rxdata += SR_BUF_SIZ; rxdesc++; if (rxdata == rxmax) { /* handle the wrap point */ rxdata = sc->rxstart; rxdesc = (sca_descriptor *) (hc->mem_start + (sc->rxdesc & hc->winmsk)); } } } /* * If single is set, just eat a packet. Otherwise eat everything up to * where cda points. Update pointers to point to the next packet. * * This handles "flushing" of a packet as received... * * If the "single" parameter is zero, all pending reeceive traffic will * be flushed out of existence. A non-zero value will only drop the * *next* (currently) pending packet... */ static void sr_eat_packet(struct sr_softc *sc, int single) { struct sr_hardc *hc; sca_descriptor *rxdesc; /* current descriptor being eval'd */ sca_descriptor *endp; /* last descriptor in chain */ sca_descriptor *cda; /* current start point */ u_int loopcnt = 0; /* count of packets flushed ??? */ u_char stat; /* captured status byte from descr */ hc = sc->hc; cda = (sca_descriptor *)(hc->mem_start + (SRC_GET16(hc->sca_base, hc->sca->dmac[DMAC_RXCH(sc->scachan)].cda) & hc->winmsk)); /* * loop until desc->stat == (0xff || EOM) Clear the status and * length in the descriptor. Increment the descriptor. */ if (hc->mempages) SRC_SET_MEM(hc->iobase, sc->rxdesc); rxdesc = (sca_descriptor *) (hc->mem_start + (sc->rxdesc & hc->winmsk)); endp = rxdesc; rxdesc = &rxdesc[sc->rxhind]; endp = &endp[sc->rxmax]; /* * allow loop, but abort it if we wrap completely... */ while (rxdesc != cda) { loopcnt++; if (loopcnt > sc->rxmax) { printf("sr%d: eat pkt %d loop, cda %p, " "rxdesc %p, stat %x.\n", sc->unit, loopcnt, cda, rxdesc, rxdesc->stat); break; } stat = rxdesc->stat; rxdesc->len = 0; rxdesc->stat = 0xff; rxdesc++; sc->rxhind++; if (rxdesc == endp) { rxdesc = (sca_descriptor *) (hc->mem_start + (sc->rxdesc & hc->winmsk)); sc->rxhind = 0; } if (single && (stat == SCA_DESC_EOM)) break; } /* * Update the eda to the previous descriptor. */ rxdesc = (sca_descriptor *)(uintptr_t)sc->rxdesc; rxdesc = &rxdesc[(sc->rxhind + sc->rxmax - 2) % sc->rxmax]; SRC_PUT16(hc->sca_base, hc->sca->dmac[DMAC_RXCH(sc->scachan)].eda, (u_short)(((uintptr_t)rxdesc + hc->mem_pstart) & 0xffff)); } /* * While there is packets available in the rx buffer, read them out * into mbufs and ship them off. */ static void sr_get_packets(struct sr_softc *sc) { u_char rxstat; /* acquired status byte */ int i; int pkts; /* count of packets found */ int rxndx; /* rcv buffer index */ int tries; /* settling time counter */ u_int len; /* length of pending packet */ struct sr_hardc *hc; /* card-level information */ sca_descriptor *rxdesc; /* descriptor in memory */ #ifndef NETGRAPH struct ifnet *ifp; /* network intf ctl table */ #else int error; #endif /* NETGRAPH */ struct mbuf *m = NULL; /* message buffer */ #if BUGGY > 0 printf("sr_get_packets(sc=%08x)\n", sc); #endif hc = sc->hc; #ifndef NETGRAPH ifp = &sc->ifsppp.pp_if; #endif /* NETGRAPH */ if (hc->mempages) { SRC_SET_MEM(hc->iobase, sc->rxdesc); SRC_SET_ON(hc->iobase); /* enable shared memory */ } pkts = 0; /* reset count of found packets */ /* * for each complete packet in the receiving pool, process each * packet... */ while (sr_packet_avail(sc, &len, &rxstat)) { /* packet pending? */ /* * I have seen situations where we got the interrupt but the * status value wasn't deposited. This code should allow * the status byte's value to settle... */ tries = 5; while ((rxstat == 0x00ff) && --tries) sr_packet_avail(sc, &len, &rxstat); #if BUGGY > 1 printf("sr_packet_avail() returned len=%d, rxstat=%02ux\n", len, rxstat); #endif pkts++; #ifdef NETGRAPH sc->inbytes += len; sc->inlast = 0; #endif /* NETGRAPH */ /* * OK, we've settled the incoming message status. We can now * process it... */ if (((rxstat & SCA_DESC_ERRORS) == 0) && (len < MCLBYTES)) { #if BUGGY > 1 printf("sr%d: sr_get_packet() rxstat=%02x, len=%d\n", sc->unit, rxstat, len); #endif MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { /* * eat (flush) packet if get mbuf fail!! */ sr_eat_packet(sc, 1); continue; } /* * construct control information for pass-off */ #ifndef NETGRAPH m->m_pkthdr.rcvif = ifp; #else m->m_pkthdr.rcvif = NULL; #endif /* NETGRAPH */ m->m_pkthdr.len = m->m_len = len; if (len > MHLEN) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { /* * We couldn't get a big enough * message packet, so we'll send the * packet to /dev/null... */ m_freem(m); sr_eat_packet(sc, 1); continue; } } /* * OK, we've got a good message buffer. Now we can * copy the received message into it */ sr_copy_rxbuf(m, sc, len); /* copy from DPRAM */ #ifndef NETGRAPH if (ifp->if_bpf) bpf_mtap(ifp, m); #if BUGGY > 3 { u_char *bp; bp = (u_char *)m; printf("sr%d: rcvd=%02x%02x%02x%02x%02x%02x\n", sc->unit, bp[0], bp[1], bp[2], bp[4], bp[5], bp[6]); } #endif sppp_input(ifp, m); ifp->if_ipackets++; #else /* NETGRAPH */ #if BUGGY > 3 { u_char *bp; bp = mtod(m,u_char *); printf("sr%d: rd=%02x:%02x:%02x:%02x:%02x:%02x", sc->unit, bp[0], bp[1], bp[2], bp[4], bp[5], bp[6]); printf(":%02x:%02x:%02x:%02x:%02x:%02x\n", bp[6], bp[7], bp[8], bp[9], bp[10], bp[11]); } #endif NG_SEND_DATA_ONLY(error, sc->hook, m); sc->ipackets++; #endif /* NETGRAPH */ /* * Update the eda to the previous descriptor. */ i = (len + SR_BUF_SIZ - 1) / SR_BUF_SIZ; sc->rxhind = (sc->rxhind + i) % sc->rxmax; rxdesc = (sca_descriptor *)(uintptr_t)sc->rxdesc; rxndx = (sc->rxhind + sc->rxmax - 2) % sc->rxmax; rxdesc = &rxdesc[rxndx]; SRC_PUT16(hc->sca_base, hc->sca->dmac[DMAC_RXCH(sc->scachan)].eda, (u_short)(((uintptr_t)rxdesc + hc->mem_pstart) & 0xffff)); } else { int got_st3, got_cda, got_eda; int tries = 5; while ((rxstat == 0xff) && --tries) sr_packet_avail(sc, &len, &rxstat); /* * It look like we get an interrupt early * sometimes and then the status is not * filled in yet. */ if (tries && (tries != 5)) continue; /* * This chunk of code handles the error packets. * We'll log them for posterity... */ sr_eat_packet(sc, 1); #ifndef NETGRAPH ifp->if_ierrors++; #else sc->ierrors[0]++; #endif /* NETGRAPH */ got_st3 = SRC_GET8(hc->sca_base, hc->sca->msci[sc->scachan].st3); got_cda = SRC_GET16(hc->sca_base, hc->sca->dmac[DMAC_RXCH(sc->scachan)].cda); got_eda = SRC_GET16(hc->sca_base, hc->sca->dmac[DMAC_RXCH(sc->scachan)].eda); #if BUGGY > 0 printf("sr%d: Receive error chan %d, " "stat %02x, msci st3 %02x," "rxhind %d, cda %04x, eda %04x.\n", sc->unit, sc->scachan, rxstat, got_st3, sc->rxhind, got_cda, got_eda); #endif } } #if BUGGY > 0 printf("sr%d: sr_get_packets() found %d packet(s)\n", sc->unit, pkts); #endif if (hc->mempages) SRC_SET_OFF(hc->iobase); } /* * All DMA interrupts come here. * * Each channel has two interrupts. * Interrupt A for errors and Interrupt B for normal stuff like end * of transmit or receive dmas. */ static void sr_dmac_intr(struct sr_hardc *hc, u_char isr1) { u_char dsr; /* contents of DMA Stat Reg */ u_char dotxstart; /* enables for tranmit part */ int mch; /* channel being processed */ struct sr_softc *sc; /* channel's softc structure */ sca_regs *sca = hc->sca; dmac_channel *dmac; /* dma structure of chip */ #if BUGGY > 0 printf("sr_dmac_intr(hc=%08x,isr1=%04x)\n", hc, isr1); #endif mch = 0; /* assume chan0 on card */ dotxstart = isr1; /* copy for xmitter starts */ /* * Shortcut if there is no interrupts for dma channel 0 or 1. * Skip processing for channel 0 if no incoming hit */ if ((isr1 & 0x0F) == 0) { mch = 1; isr1 >>= 4; } do { sc = &hc->sc[mch]; /* * Transmit channel - DMA Status Register Evaluation */ if (isr1 & 0x0C) { dmac = &sca->dmac[DMAC_TXCH(mch)]; /* * get the DMA Status Register contents and write * back to reset interrupt... */ dsr = SRC_GET8(hc->sca_base, dmac->dsr); SRC_PUT8(hc->sca_base, dmac->dsr, dsr); /* * Check for (& process) a Counter overflow */ if (dsr & SCA_DSR_COF) { printf("sr%d: TX DMA Counter overflow, " "txpacket no %lu.\n", #ifndef NETGRAPH sc->unit, sc->ifsppp.pp_if.if_opackets); sc->ifsppp.pp_if.if_oerrors++; #else sc->unit, sc->opackets); sc->oerrors++; #endif /* NETGRAPH */ } /* * Check for (& process) a Buffer overflow */ if (dsr & SCA_DSR_BOF) { printf("sr%d: TX DMA Buffer overflow, " "txpacket no %lu, dsr %02x, " "cda %04x, eda %04x.\n", #ifndef NETGRAPH sc->unit, sc->ifsppp.pp_if.if_opackets, #else sc->unit, sc->opackets, #endif /* NETGRAPH */ dsr, SRC_GET16(hc->sca_base, dmac->cda), SRC_GET16(hc->sca_base, dmac->eda)); #ifndef NETGRAPH sc->ifsppp.pp_if.if_oerrors++; #else sc->oerrors++; #endif /* NETGRAPH */ } /* * Check for (& process) an End of Transfer (OK) */ if (dsr & SCA_DSR_EOT) { /* * This should be the most common case. * * Clear the IFF_OACTIVE flag. * * Call srstart to start a new transmit if * there is data to transmit. */ #if BUGGY > 0 printf("sr%d: TX Completed OK\n", sc->unit); #endif sc->xmit_busy = 0; #ifndef NETGRAPH sc->ifsppp.pp_if.if_flags &= ~IFF_OACTIVE; sc->ifsppp.pp_if.if_timer = 0; #else /* XXX may need to mark tx inactive? */ sc->out_deficit++; sc->out_dog = DOG_HOLDOFF; #endif /* NETGRAPH */ if (sc->txb_inuse && --sc->txb_inuse) sr_xmit(sc); } } /* * Receive channel processing of DMA Status Register */ if (isr1 & 0x03) { dmac = &sca->dmac[DMAC_RXCH(mch)]; dsr = SRC_GET8(hc->sca_base, dmac->dsr); SRC_PUT8(hc->sca_base, dmac->dsr, dsr); /* * End of frame processing (MSG OK?) */ if (dsr & SCA_DSR_EOM) { #if BUGGY > 0 int tt, ind; #ifndef NETGRAPH tt = sc->ifsppp.pp_if.if_ipackets; #else /* NETGRAPH */ tt = sc->ipackets; #endif /* NETGRAPH */ ind = sc->rxhind; #endif sr_get_packets(sc); #if BUGGY > 0 #ifndef NETGRAPH if (tt == sc->ifsppp.pp_if.if_ipackets) #else /* NETGRAPH */ if (tt == sc->ipackets) #endif /* NETGRAPH */ { sca_descriptor *rxdesc; int i; printf("SR: RXINTR isr1 %x, dsr %x, " "no data %d pkts, orxind %d.\n", dotxstart, dsr, tt, ind); printf("SR: rxdesc %x, rxstart %x, " "rxend %x, rxhind %d, " "rxmax %d.\n", sc->rxdesc, sc->rxstart, sc->rxend, sc->rxhind, sc->rxmax); printf("SR: cda %x, eda %x.\n", SRC_GET16(hc->sca_base, dmac->cda), SRC_GET16(hc->sca_base, dmac->eda)); if (hc->mempages) { SRC_SET_ON(hc->iobase); SRC_SET_MEM(hc->iobase, sc->rxdesc); } rxdesc = (sca_descriptor *) (hc->mem_start + (sc->rxdesc & hc->winmsk)); rxdesc = &rxdesc[sc->rxhind]; for (i = 0; i < 3; i++, rxdesc++) printf("SR: rxdesc->stat %x, " "len %d.\n", rxdesc->stat, rxdesc->len); if (hc->mempages) SRC_SET_OFF(hc->iobase); } #endif /* BUGGY */ } /* * Check for Counter overflow */ if (dsr & SCA_DSR_COF) { printf("sr%d: RX DMA Counter overflow, " "rxpkts %lu.\n", #ifndef NETGRAPH sc->unit, sc->ifsppp.pp_if.if_ipackets); sc->ifsppp.pp_if.if_ierrors++; #else /* NETGRAPH */ sc->unit, sc->ipackets); sc->ierrors[1]++; #endif /* NETGRAPH */ } /* * Check for Buffer overflow */ if (dsr & SCA_DSR_BOF) { printf("sr%d: RX DMA Buffer overflow, " "rxpkts %lu, rxind %d, " "cda %x, eda %x, dsr %x.\n", #ifndef NETGRAPH sc->unit, sc->ifsppp.pp_if.if_ipackets, #else /* NETGRAPH */ sc->unit, sc->ipackets, #endif /* NETGRAPH */ sc->rxhind, SRC_GET16(hc->sca_base, dmac->cda), SRC_GET16(hc->sca_base, dmac->eda), dsr); /* * Make sure we eat as many as possible. * Then get the system running again. */ if (hc->mempages) SRC_SET_ON(hc->iobase); sr_eat_packet(sc, 0); #ifndef NETGRAPH sc->ifsppp.pp_if.if_ierrors++; #else /* NETGRAPH */ sc->ierrors[2]++; #endif /* NETGRAPH */ SRC_PUT8(hc->sca_base, sca->msci[mch].cmd, SCA_CMD_RXMSGREJ); SRC_PUT8(hc->sca_base, dmac->dsr, SCA_DSR_DE); #if BUGGY > 0 printf("sr%d: RX DMA Buffer overflow, " "rxpkts %lu, rxind %d, " "cda %x, eda %x, dsr %x. After\n", sc->unit, #ifndef NETGRAPH sc->ipackets, #else /* NETGRAPH */ sc->ifsppp.pp_if.if_ipackets, #endif /* NETGRAPH */ sc->rxhind, SRC_GET16(hc->sca_base, dmac->cda), SRC_GET16(hc->sca_base, dmac->eda), SRC_GET8(hc->sca_base, dmac->dsr)); #endif if (hc->mempages) SRC_SET_OFF(hc->iobase); } /* * End of Transfer */ if (dsr & SCA_DSR_EOT) { /* * If this happen, it means that we are * receiving faster than what the processor * can handle. * * XXX We should enable the dma again. */ printf("sr%d: RX End of xfer, rxpkts %lu.\n", sc->unit, #ifndef NETGRAPH sc->ifsppp.pp_if.if_ipackets); sc->ifsppp.pp_if.if_ierrors++; #else sc->ipackets); sc->ierrors[3]++; #endif /* NETGRAPH */ } } isr1 >>= 4; /* process next half of ISR */ mch++; /* and move to next channel */ } while ((mch < NCHAN) && isr1); /* loop for each chn */ /* * Now that we have done all the urgent things, see if we can fill * the transmit buffers. */ for (mch = 0; mch < NCHAN; mch++) { if (dotxstart & 0x0C) { /* TX initiation enabled? */ sc = &hc->sc[mch]; #ifndef NETGRAPH srstart(&sc->ifsppp.pp_if); #else srstart(sc); #endif /* NETGRAPH */ } dotxstart >>= 4;/* shift for next channel */ } } #ifndef NETGRAPH #ifdef USE_MODEMCK /* * Perform timeout on an FR channel * * Establish a periodic check of open N2 ports; If * a port is open/active, its DCD state is checked * and a loss of DCD is recognized (and eventually * processed). */ static void sr_modemck(void *arg) { u_int s; int card; /* card index in table */ int cards; /* card list index */ int mch; /* channel on card */ u_char dcd_v; /* Data Carrier Detect */ u_char got_st0; /* contents of ST0 */ u_char got_st1; /* contents of ST1 */ u_char got_st2; /* contents of ST2 */ u_char got_st3; /* contents of ST3 */ struct sr_hardc *hc; /* card's configuration */ struct sr_hardc *Card[16];/* up to 16 cards in system */ struct sr_softc *sc; /* channel's softc structure */ struct ifnet *ifp; /* interface control table */ msci_channel *msci; /* regs specific to channel */ s = splimp(); #if 0 if (sr_opens == 0) { /* count of "up" channels */ sr_watcher = 0; /* indicate no watcher */ splx(s); return; } #endif sr_watcher = 1; /* mark that we're online */ /* * Now we'll need a list of cards to process. Since we can handle * both ISA and PCI cards (and I didn't think of making this logic * global YET) we'll generate a single table of card table * addresses. */ cards = 0; for (card = 0; card < NSR; card++) { hc = &sr_hardc[card]; if (hc->sc == (void *)0) continue; Card[cards++] = hc; } hc = sr_hardc_pci; while (hc) { Card[cards++] = hc; hc = hc->next; } /* * OK, we've got work we can do. Let's do it... (Please note that * this code _only_ deals w/ ISA cards) */ for (card = 0; card < cards; card++) { hc = Card[card];/* get card table */ for (mch = 0; mch < hc->numports; mch++) { sc = &hc->sc[mch]; ifp = &sc->ifsppp.pp_if; /* * if this channel isn't "up", skip it */ if ((ifp->if_flags & IFF_UP) == 0) continue; /* * OK, now we can go looking at this channel's * actual register contents... */ msci = &hc->sca->msci[sc->scachan]; /* * OK, now we'll look into the actual status of this * channel... * * I suck in more registers than strictly needed */ got_st0 = SRC_GET8(hc->sca_base, msci->st0); got_st1 = SRC_GET8(hc->sca_base, msci->st1); got_st2 = SRC_GET8(hc->sca_base, msci->st2); got_st3 = SRC_GET8(hc->sca_base, msci->st3); /* * We want to see if the DCD signal is up (DCD is * true if zero) */ dcd_v = (got_st3 & SCA_ST3_DCD) == 0; if (dcd_v == 0) printf("sr%d: DCD lost\n", sc->unit); } } /* * OK, now set up for the next modem signal checking pass... */ timeout(sr_modemck, NULL, hz); splx(s); } #endif #else /* NETGRAPH */ /* * If a port is open/active, it's DCD state is checked * and a loss of DCD is recognized (and eventually processed?). */ static void sr_modemck(struct sr_softc *sc ) { u_int s; u_char got_st3; /* contents of ST3 */ struct sr_hardc *hc = sc->hc; /* card's configuration */ msci_channel *msci; /* regs specific to channel */ s = splimp(); if (sc->running == 0) return; /* * OK, now we can go looking at this channel's register contents... */ msci = &hc->sca->msci[sc->scachan]; got_st3 = SRC_GET8(hc->sca_base, msci->st3); /* * We want to see if the DCD signal is up (DCD is true if zero) */ sc->dcd = (got_st3 & SCA_ST3_DCD) == 0; splx(s); } #endif /* NETGRAPH */ static void sr_msci_intr(struct sr_hardc *hc, u_char isr0) { printf("src%d: SRINTR: MSCI\n", hc->cunit); } static void sr_timer_intr(struct sr_hardc *hc, u_char isr2) { printf("src%d: SRINTR: TIMER\n", hc->cunit); } #ifdef NETGRAPH /***************************************** * Device timeout/watchdog routine. * called once per second. * checks to see that if activity was expected, that it hapenned. * At present we only look to see if expected output was completed. */ static void ngsr_watchdog_frame(void * arg) { struct sr_softc * sc = arg; int s; int speed; if (sc->running == 0) return; /* if we are not running let timeouts die */ /* * calculate the apparent throughputs * XXX a real hack */ s = splimp(); speed = sc->inbytes - sc->lastinbytes; sc->lastinbytes = sc->inbytes; if ( sc->inrate < speed ) sc->inrate = speed; speed = sc->outbytes - sc->lastoutbytes; sc->lastoutbytes = sc->outbytes; if ( sc->outrate < speed ) sc->outrate = speed; sc->inlast++; splx(s); if ((sc->inlast > QUITE_A_WHILE) && (sc->out_deficit > LOTS_OF_PACKETS)) { log(LOG_ERR, "sr%d: No response from remote end\n", sc->unit); s = splimp(); sr_down(sc); sr_up(sc); sc->inlast = sc->out_deficit = 0; splx(s); } else if ( sc->xmit_busy ) { /* no TX -> no TX timeouts */ if (sc->out_dog == 0) { log(LOG_ERR, "sr%d: Transmit failure.. no clock?\n", sc->unit); s = splimp(); srwatchdog(sc); #if 0 sr_down(sc); sr_up(sc); #endif splx(s); sc->inlast = sc->out_deficit = 0; } else { sc->out_dog--; } } sr_modemck(sc); /* update the DCD status */ sc->handle = timeout(ngsr_watchdog_frame, sc, hz); } /*********************************************************************** * This section contains the methods for the Netgraph interface ***********************************************************************/ /* * It is not possible or allowable to create a node of this type. * If the hardware exists, it will already have created it. */ static int ngsr_constructor(node_p node) { return (EINVAL); } /* * give our ok for a hook to be added... * If we are not running this should kick the device into life. * The hook's private info points to our stash of info about that * channel. */ static int ngsr_newhook(node_p node, hook_p hook, const char *name) { struct sr_softc * sc = NG_NODE_PRIVATE(node); /* * check if it's our friend the debug hook */ if (strcmp(name, NG_SR_HOOK_DEBUG) == 0) { NG_HOOK_SET_PRIVATE(hook, NULL); /* paranoid */ sc->debug_hook = hook; return (0); } /* * Check for raw mode hook. */ if (strcmp(name, NG_SR_HOOK_RAW) != 0) { return (EINVAL); } NG_HOOK_SET_PRIVATE(hook, sc); sc->hook = hook; sc->datahooks++; sr_up(sc); return (0); } /* * incoming messages. * Just respond to the generic TEXT_STATUS message */ static int ngsr_rcvmsg(node_p node, item_p item, hook_p lasthook) { struct sr_softc * sc; struct ng_mesg *resp = NULL; int error = 0; struct ng_mesg *msg; NGI_GET_MSG(item,msg); sc = NG_NODE_PRIVATE(node); switch (msg->header.typecookie) { case NG_SR_COOKIE: error = EINVAL; break; case NGM_GENERIC_COOKIE: switch(msg->header.cmd) { case NGM_TEXT_STATUS: { char *arg; int pos = 0; int resplen = sizeof(struct ng_mesg) + 512; NG_MKRESPONSE(resp, msg, resplen, M_NOWAIT); if (resp == NULL) { error = ENOMEM; break; } arg = (resp)->data; pos = sprintf(arg, "%ld bytes in, %ld bytes out\n" "highest rate seen: %ld B/S in, %ld B/S out\n", sc->inbytes, sc->outbytes, sc->inrate, sc->outrate); pos += sprintf(arg + pos, "%ld output errors\n", sc->oerrors); pos += sprintf(arg + pos, "ierrors = %ld, %ld, %ld, %ld, %ld, %ld\n", sc->ierrors[0], sc->ierrors[1], sc->ierrors[2], sc->ierrors[3], sc->ierrors[4], sc->ierrors[5]); resp->header.arglen = pos + 1; break; } default: error = EINVAL; break; } break; default: error = EINVAL; break; } /* Take care of synchronous response, if any */ NG_RESPOND_MSG(error, node, item, resp); NG_FREE_MSG(msg); return (error); } /* * get data from another node and transmit it to the correct channel */ static int ngsr_rcvdata(hook_p hook, item_p item) { int s; int error = 0; struct sr_softc * sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook)); struct ifqueue *xmitq_p; struct mbuf *m; meta_p meta; NGI_GET_M(item, m); NGI_GET_META(item, meta); NG_FREE_ITEM(item); /* * data doesn't come in from just anywhere (e.g control hook) */ if ( NG_HOOK_PRIVATE(hook) == NULL) { error = ENETDOWN; goto bad; } /* * Now queue the data for when it can be sent */ if (meta && meta->priority > 0) { xmitq_p = (&sc->xmitq_hipri); } else { xmitq_p = (&sc->xmitq); } s = splimp(); IF_LOCK(xmitq_p); if (_IF_QFULL(xmitq_p)) { _IF_DROP(xmitq_p); IF_UNLOCK(xmitq_p); splx(s); error = ENOBUFS; goto bad; } _IF_ENQUEUE(xmitq_p, m); IF_UNLOCK(xmitq_p); srstart(sc); splx(s); return (0); bad: /* * It was an error case. * check if we need to free the mbuf, and then return the error */ NG_FREE_M(m); NG_FREE_META(meta); return (error); } /* * do local shutdown processing.. * this node will refuse to go away, unless the hardware says to.. * don't unref the node, or remove our name. just clear our links up. */ static int ngsr_shutdown(node_p node) { struct sr_softc * sc = NG_NODE_PRIVATE(node); sr_down(sc); NG_NODE_UNREF(node); /* XXX should drain queues! */ if (ng_make_node_common(&typestruct, &sc->node) != 0) return (0); sprintf(sc->nodename, "%s%d", NG_SR_NODE_TYPE, sc->unit); if (ng_name_node(sc->node, sc->nodename)) { printf("node naming failed\n"); sc->node = NULL; NG_NODE_UNREF(sc->node); /* drop it again */ return (0); } NG_NODE_SET_PRIVATE(sc->node, sc); callout_handle_init(&sc->handle); /* should kill timeout */ sc->running = 0; return (0); } /* already linked */ static int ngsr_connect(hook_p hook) { /* probably not at splnet, force outward queueing */ NG_HOOK_FORCE_QUEUE(NG_HOOK_PEER(hook)); /* be really amiable and just say "YUP that's OK by me! " */ return (0); } /* * notify on hook disconnection (destruction) * * Invalidate the private data associated with this dlci. * For this type, removal of the last link resets tries to destroy the node. * As the device still exists, the shutdown method will not actually * destroy the node, but reset the device and leave it 'fresh' :) * * The node removal code will remove all references except that owned by the * driver. */ static int ngsr_disconnect(hook_p hook) { struct sr_softc * sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook)); int s; /* * If it's the data hook, then free resources etc. */ if (NG_HOOK_PRIVATE(hook)) { s = splimp(); sc->datahooks--; if (sc->datahooks == 0) sr_down(sc); splx(s); } else { sc->debug_hook = NULL; } return (0); } /* * called during bootup * or LKM loading to put this type into the list of known modules */ static void ngsr_init(void *ignored) { if (ng_newtype(&typestruct)) printf("ngsr install failed\n"); ngsr_done_init = 1; } #endif /* NETGRAPH */ /* ********************************* END ************************************ */