/*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_H_ #define _NET80211_IEEE80211_H_ /* * 802.11 protocol definitions. */ #define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ /* is 802.11 address multicast/broadcast? */ #define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01) /* IEEE 802.11 PLCP header */ struct ieee80211_plcp_hdr { uint16_t i_sfd; uint8_t i_signal; uint8_t i_service; uint16_t i_length; uint16_t i_crc; } __packed; #define IEEE80211_PLCP_SFD 0xF3A0 #define IEEE80211_PLCP_SERVICE 0x00 /* * generic definitions for IEEE 802.11 frames */ struct ieee80211_frame { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ /* see below */ } __packed; struct ieee80211_qosframe { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; uint8_t i_qos[2]; /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ /* see below */ } __packed; struct ieee80211_qoscntl { uint8_t i_qos[2]; }; struct ieee80211_frame_addr4 { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; uint8_t i_addr4[IEEE80211_ADDR_LEN]; } __packed; struct ieee80211_qosframe_addr4 { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; uint8_t i_addr4[IEEE80211_ADDR_LEN]; uint8_t i_qos[2]; } __packed; #define IEEE80211_FC0_VERSION_MASK 0x03 #define IEEE80211_FC0_VERSION_SHIFT 0 #define IEEE80211_FC0_VERSION_0 0x00 #define IEEE80211_FC0_TYPE_MASK 0x0c #define IEEE80211_FC0_TYPE_SHIFT 2 #define IEEE80211_FC0_TYPE_MGT 0x00 #define IEEE80211_FC0_TYPE_CTL 0x04 #define IEEE80211_FC0_TYPE_DATA 0x08 #define IEEE80211_FC0_SUBTYPE_MASK 0xf0 #define IEEE80211_FC0_SUBTYPE_SHIFT 4 /* for TYPE_MGT */ #define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00 #define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10 #define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20 #define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30 #define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40 #define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50 #define IEEE80211_FC0_SUBTYPE_BEACON 0x80 #define IEEE80211_FC0_SUBTYPE_ATIM 0x90 #define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0 #define IEEE80211_FC0_SUBTYPE_AUTH 0xb0 #define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0 #define IEEE80211_FC0_SUBTYPE_ACTION 0xd0 /* for TYPE_CTL */ #define IEEE80211_FC0_SUBTYPE_BAR 0x80 #define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0 #define IEEE80211_FC0_SUBTYPE_RTS 0xb0 #define IEEE80211_FC0_SUBTYPE_CTS 0xc0 #define IEEE80211_FC0_SUBTYPE_ACK 0xd0 #define IEEE80211_FC0_SUBTYPE_CF_END 0xe0 #define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0 /* for TYPE_DATA (bit combination) */ #define IEEE80211_FC0_SUBTYPE_DATA 0x00 #define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10 #define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20 #define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30 #define IEEE80211_FC0_SUBTYPE_NODATA 0x40 #define IEEE80211_FC0_SUBTYPE_CFACK 0x50 #define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60 #define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70 #define IEEE80211_FC0_SUBTYPE_QOS 0x80 #define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0 #define IEEE80211_FC1_DIR_MASK 0x03 #define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */ #define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */ #define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */ #define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */ #define IEEE80211_FC1_MORE_FRAG 0x04 #define IEEE80211_FC1_RETRY 0x08 #define IEEE80211_FC1_PWR_MGT 0x10 #define IEEE80211_FC1_MORE_DATA 0x20 #define IEEE80211_FC1_WEP 0x40 #define IEEE80211_FC1_ORDER 0x80 #define IEEE80211_SEQ_FRAG_MASK 0x000f #define IEEE80211_SEQ_FRAG_SHIFT 0 #define IEEE80211_SEQ_SEQ_MASK 0xfff0 #define IEEE80211_SEQ_SEQ_SHIFT 4 #define IEEE80211_SEQ_RANGE 4096 #define IEEE80211_SEQ_ADD(seq, incr) \ (((seq) + (incr)) & (IEEE80211_SEQ_RANGE-1)) #define IEEE80211_SEQ_INC(seq) IEEE80211_SEQ_ADD(seq,1) #define IEEE80211_SEQ_SUB(a, b) \ (((a) + IEEE80211_SEQ_RANGE - (b)) & (IEEE80211_SEQ_RANGE-1)) #define IEEE80211_SEQ_BA_RANGE 2048 /* 2^11 */ #define IEEE80211_SEQ_BA_BEFORE(a, b) \ (IEEE80211_SEQ_SUB(b, a+1) < IEEE80211_SEQ_BA_RANGE-1) #define IEEE80211_NWID_LEN 32 #define IEEE80211_QOS_TXOP 0x00ff /* bit 8 is reserved */ #define IEEE80211_QOS_AMSDU 0x80 #define IEEE80211_QOS_AMSDU_S 7 #define IEEE80211_QOS_ACKPOLICY 0x60 #define IEEE80211_QOS_ACKPOLICY_S 5 #define IEEE80211_QOS_ACKPOLICY_NOACK 0x20 /* No ACK required */ #define IEEE80211_QOS_ACKPOLICY_BA 0x60 /* Block ACK */ #define IEEE80211_QOS_ESOP 0x10 #define IEEE80211_QOS_ESOP_S 4 #define IEEE80211_QOS_TID 0x0f /* does frame have QoS sequence control data */ #define IEEE80211_QOS_HAS_SEQ(wh) \ (((wh)->i_fc[0] & \ (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_QOS)) == \ (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS)) /* * WME/802.11e information element. */ struct ieee80211_wme_info { uint8_t wme_id; /* IEEE80211_ELEMID_VENDOR */ uint8_t wme_len; /* length in bytes */ uint8_t wme_oui[3]; /* 0x00, 0x50, 0xf2 */ uint8_t wme_type; /* OUI type */ uint8_t wme_subtype; /* OUI subtype */ uint8_t wme_version; /* spec revision */ uint8_t wme_info; /* QoS info */ } __packed; /* * WME/802.11e Tspec Element */ struct ieee80211_wme_tspec { uint8_t ts_id; uint8_t ts_len; uint8_t ts_oui[3]; uint8_t ts_oui_type; uint8_t ts_oui_subtype; uint8_t ts_version; uint8_t ts_tsinfo[3]; uint8_t ts_nom_msdu[2]; uint8_t ts_max_msdu[2]; uint8_t ts_min_svc[4]; uint8_t ts_max_svc[4]; uint8_t ts_inactv_intv[4]; uint8_t ts_susp_intv[4]; uint8_t ts_start_svc[4]; uint8_t ts_min_rate[4]; uint8_t ts_mean_rate[4]; uint8_t ts_max_burst[4]; uint8_t ts_min_phy[4]; uint8_t ts_peak_rate[4]; uint8_t ts_delay[4]; uint8_t ts_surplus[2]; uint8_t ts_medium_time[2]; } __packed; /* * WME AC parameter field */ struct ieee80211_wme_acparams { uint8_t acp_aci_aifsn; uint8_t acp_logcwminmax; uint16_t acp_txop; } __packed; #define WME_NUM_AC 4 /* 4 AC categories */ #define WME_NUM_TID 16 /* 16 tids */ #define WME_PARAM_ACI 0x60 /* Mask for ACI field */ #define WME_PARAM_ACI_S 5 /* Shift for ACI field */ #define WME_PARAM_ACM 0x10 /* Mask for ACM bit */ #define WME_PARAM_ACM_S 4 /* Shift for ACM bit */ #define WME_PARAM_AIFSN 0x0f /* Mask for aifsn field */ #define WME_PARAM_AIFSN_S 0 /* Shift for aifsn field */ #define WME_PARAM_LOGCWMIN 0x0f /* Mask for CwMin field (in log) */ #define WME_PARAM_LOGCWMIN_S 0 /* Shift for CwMin field */ #define WME_PARAM_LOGCWMAX 0xf0 /* Mask for CwMax field (in log) */ #define WME_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */ #define WME_AC_TO_TID(_ac) ( \ ((_ac) == WME_AC_VO) ? 6 : \ ((_ac) == WME_AC_VI) ? 5 : \ ((_ac) == WME_AC_BK) ? 1 : \ 0) #define TID_TO_WME_AC(_tid) ( \ ((_tid) < 1) ? WME_AC_BE : \ ((_tid) < 3) ? WME_AC_BK : \ ((_tid) < 6) ? WME_AC_VI : \ WME_AC_VO) /* * WME Parameter Element */ struct ieee80211_wme_param { uint8_t param_id; uint8_t param_len; uint8_t param_oui[3]; uint8_t param_oui_type; uint8_t param_oui_subtype; uint8_t param_version; uint8_t param_qosInfo; #define WME_QOSINFO_COUNT 0x0f /* Mask for param count field */ uint8_t param_reserved; struct ieee80211_wme_acparams params_acParams[WME_NUM_AC]; } __packed; /* * Management Notification Frame */ struct ieee80211_mnf { uint8_t mnf_category; uint8_t mnf_action; uint8_t mnf_dialog; uint8_t mnf_status; } __packed; #define MNF_SETUP_REQ 0 #define MNF_SETUP_RESP 1 #define MNF_TEARDOWN 2 /* * 802.11n Management Action Frames */ /* generic frame format */ struct ieee80211_action { uint8_t ia_category; uint8_t ia_action; } __packed; #define IEEE80211_ACTION_CAT_QOS 0 /* QoS */ #define IEEE80211_ACTION_CAT_BA 3 /* BA */ #define IEEE80211_ACTION_CAT_HT 7 /* HT */ #define IEEE80211_ACTION_HT_TXCHWIDTH 0 /* recommended xmit chan width*/ #define IEEE80211_ACTION_HT_MIMOPWRSAVE 1 /* MIMO power save */ /* HT - recommended transmission channel width */ struct ieee80211_action_ht_txchwidth { struct ieee80211_action at_header; uint8_t at_chwidth; } __packed; #define IEEE80211_A_HT_TXCHWIDTH_20 0 #define IEEE80211_A_HT_TXCHWIDTH_2040 1 /* HT - MIMO Power Save (NB: D2.04) */ struct ieee80211_action_ht_mimopowersave { struct ieee80211_action am_header; uint8_t am_enable; uint8_t am_mode; } __packed; /* Block Ack actions */ #define IEEE80211_ACTION_BA_ADDBA_REQUEST 0 /* ADDBA request */ #define IEEE80211_ACTION_BA_ADDBA_RESPONSE 1 /* ADDBA response */ #define IEEE80211_ACTION_BA_DELBA 2 /* DELBA */ /* Block Ack Parameter Set */ #define IEEE80211_BAPS_BUFSIZ 0xffc0 /* buffer size */ #define IEEE80211_BAPS_BUFSIZ_S 6 #define IEEE80211_BAPS_TID 0x003c /* TID */ #define IEEE80211_BAPS_TID_S 2 #define IEEE80211_BAPS_POLICY 0x0002 /* block ack policy */ #define IEEE80211_BAPS_POLICY_S 1 #define IEEE80211_BAPS_POLICY_DELAYED (0< IEEE80211_MIN_LEN. The default * mtu is Ethernet-compatible; it's set by ether_ifattach. */ #define IEEE80211_MTU_MAX 2290 #define IEEE80211_MTU_MIN 32 #define IEEE80211_MAX_LEN (2300 + IEEE80211_CRC_LEN + \ (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN)) #define IEEE80211_ACK_LEN \ (sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN) #define IEEE80211_MIN_LEN \ (sizeof(struct ieee80211_frame_min) + IEEE80211_CRC_LEN) /* * The 802.11 spec says at most 2007 stations may be * associated at once. For most AP's this is way more * than is feasible so we use a default of 128. This * number may be overridden by the driver and/or by * user configuration. */ #define IEEE80211_AID_MAX 2007 #define IEEE80211_AID_DEF 128 #define IEEE80211_AID(b) ((b) &~ 0xc000) /* * RTS frame length parameters. The default is specified in * the 802.11 spec as 512; we treat it as implementation-dependent * so it's defined in ieee80211_var.h. The max may be wrong * for jumbo frames. */ #define IEEE80211_RTS_MIN 1 #define IEEE80211_RTS_MAX 2346 /* * TX fragmentation parameters. As above for RTS, we treat * default as implementation-dependent so define it elsewhere. */ #define IEEE80211_FRAG_MIN 256 #define IEEE80211_FRAG_MAX 2346 /* * Beacon interval (TU's). Min+max come from WiFi requirements. * As above, we treat default as implementation-dependent so * define it elsewhere. */ #define IEEE80211_BINTVAL_MAX 1000 /* max beacon interval (TU's) */ #define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TU's) */ /* * DTIM period (beacons). Min+max are not really defined * by the protocol but we want them publicly visible so * define them here. */ #define IEEE80211_DTIM_MAX 15 /* max DTIM period */ #define IEEE80211_DTIM_MIN 1 /* min DTIM period */ /* * Beacon miss threshold (beacons). As for DTIM, we define * them here to be publicly visible. Note the max may be * clamped depending on device capabilities. */ #define IEEE80211_HWBMISS_MIN 1 #define IEEE80211_HWBMISS_MAX 255 /* * 802.11 frame duration definitions. */ struct ieee80211_duration { uint16_t d_rts_dur; uint16_t d_data_dur; uint16_t d_plcp_len; uint8_t d_residue; /* unused octets in time slot */ }; /* One Time Unit (TU) is 1Kus = 1024 microseconds. */ #define IEEE80211_DUR_TU 1024 /* IEEE 802.11b durations for DSSS PHY in microseconds */ #define IEEE80211_DUR_DS_LONG_PREAMBLE 144 #define IEEE80211_DUR_DS_SHORT_PREAMBLE 72 #define IEEE80211_DUR_DS_SLOW_PLCPHDR 48 #define IEEE80211_DUR_DS_FAST_PLCPHDR 24 #define IEEE80211_DUR_DS_SLOW_ACK 112 #define IEEE80211_DUR_DS_FAST_ACK 56 #define IEEE80211_DUR_DS_SLOW_CTS 112 #define IEEE80211_DUR_DS_FAST_CTS 56 #define IEEE80211_DUR_DS_SLOT 20 #define IEEE80211_DUR_DS_SIFS 10 #define IEEE80211_DUR_DS_PIFS (IEEE80211_DUR_DS_SIFS + IEEE80211_DUR_DS_SLOT) #define IEEE80211_DUR_DS_DIFS (IEEE80211_DUR_DS_SIFS + \ 2 * IEEE80211_DUR_DS_SLOT) #define IEEE80211_DUR_DS_EIFS (IEEE80211_DUR_DS_SIFS + \ IEEE80211_DUR_DS_SLOW_ACK + \ IEEE80211_DUR_DS_LONG_PREAMBLE + \ IEEE80211_DUR_DS_SLOW_PLCPHDR + \ IEEE80211_DUR_DIFS) /* * Atheros fast-frame encapsulation format. * FF max payload: * 802.2 + FFHDR + HPAD + 802.3 + 802.2 + 1500 + SPAD + 802.3 + 802.2 + 1500: * 8 + 4 + 4 + 14 + 8 + 1500 + 6 + 14 + 8 + 1500 * = 3066 */ /* fast frame header is 32-bits */ #define ATH_FF_PROTO 0x0000003f /* protocol */ #define ATH_FF_PROTO_S 0 #define ATH_FF_FTYPE 0x000000c0 /* frame type */ #define ATH_FF_FTYPE_S 6 #define ATH_FF_HLEN32 0x00000300 /* optional hdr length */ #define ATH_FF_HLEN32_S 8 #define ATH_FF_SEQNUM 0x001ffc00 /* sequence number */ #define ATH_FF_SEQNUM_S 10 #define ATH_FF_OFFSET 0xffe00000 /* offset to 2nd payload */ #define ATH_FF_OFFSET_S 21 #define ATH_FF_MAX_HDR_PAD 4 #define ATH_FF_MAX_SEP_PAD 6 #define ATH_FF_MAX_HDR 30 #define ATH_FF_PROTO_L2TUNNEL 0 /* L2 tunnel protocol */ #define ATH_FF_ETH_TYPE 0x88bd /* Ether type for encapsulated frames */ #define ATH_FF_SNAP_ORGCODE_0 0x00 #define ATH_FF_SNAP_ORGCODE_1 0x03 #define ATH_FF_SNAP_ORGCODE_2 0x7f #endif /* _NET80211_IEEE80211_H_ */