/* * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Don Ahn. * * Libretto PCMCIA floppy support by David Horwitt (dhorwitt@ucsd.edu) * aided by the Linux floppy driver modifications from David Bateman * (dbateman@eng.uts.edu.au). * * Copyright (c) 1993, 1994 by * jc@irbs.UUCP (John Capo) * vak@zebub.msk.su (Serge Vakulenko) * ache@astral.msk.su (Andrew A. Chernov) * * Copyright (c) 1993, 1994, 1995 by * joerg_wunsch@uriah.sax.de (Joerg Wunsch) * dufault@hda.com (Peter Dufault) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)fd.c 7.4 (Berkeley) 5/25/91 * $Id: fd.c,v 1.53 1999/04/06 03:12:22 peter Exp $ * */ #include "fd.h" #include "opt_devfs.h" #include "opt_fdc.h" #if NFDC > 0 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DEVFS #include #endif /* DEVFS */ #include #ifdef PC98 #include #include #include #include #include #else #include #include #include #endif #include #include /* misuse a flag to identify format operation */ #define B_FORMAT B_XXX /* configuration flags */ #define FDC_PRETEND_D0 (1 << 0) /* pretend drive 0 to be there */ #ifdef FDC_YE #define FDC_IS_PCMCIA (1 << 1) /* if successful probe, then it's a PCMCIA device */ #endif /* internally used only, not really from CMOS: */ #define RTCFDT_144M_PRETENDED 0x1000 /* * this biotab field doubles as a field for the physical unit number * on the controller */ #define id_physid id_scsiid /* error returns for fd_cmd() */ #define FD_FAILED -1 #define FD_NOT_VALID -2 #define FDC_ERRMAX 100 /* do not log more */ #ifdef PC98 #define NUMTYPES 5 #define NUMDENS NUMTYPES #else #define NUMTYPES 14 #define NUMDENS (NUMTYPES - 6) #endif /* These defines (-1) must match index for fd_types */ #define F_TAPE_TYPE 0x020 /* bit for fd_types to indicate tape */ #define NO_TYPE 0 /* must match NO_TYPE in ft.c */ #ifdef PC98 #define FDT_NONE 0 /* none present */ #define FDT_12M 1 /* 1M/640K FDD */ #define FDT_144M 2 /* 1.44M/1M/640K FDD */ #define FD_1200 1 #define FD_1232 2 #define FD_720 3 #define FD_640 4 #define FD_1440 5 #else #define FD_1720 1 #define FD_1480 2 #define FD_1440 3 #define FD_1200 4 #define FD_820 5 #define FD_800 6 #define FD_720 7 #define FD_360 8 #define FD_1480in5_25 9 #define FD_1440in5_25 10 #define FD_820in5_25 11 #define FD_800in5_25 12 #define FD_720in5_25 13 #define FD_360in5_25 14 #endif static struct fd_type fd_types[NUMTYPES] = { #ifdef PC98 { 15,2,0xFF,0x1B,80,2400,1,0,2,0x54,1 }, /* 1.2 meg HD floppy */ { 8,3,0xFF,0x35,77,1232,1,0,2,0x74,1 }, /* 1.2 meg HD floppy 1024/sec */ { 9,2,0xFF,0x20,80,1440,1,1,2,0x50,1 }, /* 720k floppy in 1.2meg drive */ { 8,2,0xFF,0x2A,80,1280,1,1,2,0x50,1 }, /* 640k floppy in 1.2meg drive */ { 18,2,0xFF,0x1B,80,2880,1,2,2,0x54,1 }, /* 1.44 meg HD 3.5in floppy */ #else { 21,2,0xFF,0x04,82,3444,1,FDC_500KBPS,2,0x0C,2 }, /* 1.72M in HD 3.5in */ { 18,2,0xFF,0x1B,82,2952,1,FDC_500KBPS,2,0x6C,1 }, /* 1.48M in HD 3.5in */ { 18,2,0xFF,0x1B,80,2880,1,FDC_500KBPS,2,0x6C,1 }, /* 1.44M in HD 3.5in */ { 15,2,0xFF,0x1B,80,2400,1,FDC_500KBPS,2,0x54,1 }, /* 1.2M in HD 5.25/3.5 */ { 10,2,0xFF,0x10,82,1640,1,FDC_250KBPS,2,0x2E,1 }, /* 820K in HD 3.5in */ { 10,2,0xFF,0x10,80,1600,1,FDC_250KBPS,2,0x2E,1 }, /* 800K in HD 3.5in */ { 9,2,0xFF,0x20,80,1440,1,FDC_250KBPS,2,0x50,1 }, /* 720K in HD 3.5in */ { 9,2,0xFF,0x2A,40, 720,1,FDC_250KBPS,2,0x50,1 }, /* 360K in DD 5.25in */ { 18,2,0xFF,0x02,82,2952,1,FDC_500KBPS,2,0x02,2 }, /* 1.48M in HD 5.25in */ { 18,2,0xFF,0x02,80,2880,1,FDC_500KBPS,2,0x02,2 }, /* 1.44M in HD 5.25in */ { 10,2,0xFF,0x10,82,1640,1,FDC_300KBPS,2,0x2E,1 }, /* 820K in HD 5.25in */ { 10,2,0xFF,0x10,80,1600,1,FDC_300KBPS,2,0x2E,1 }, /* 800K in HD 5.25in */ { 9,2,0xFF,0x20,80,1440,1,FDC_300KBPS,2,0x50,1 }, /* 720K in HD 5.25in */ { 9,2,0xFF,0x23,40, 720,2,FDC_300KBPS,2,0x50,1 }, /* 360K in HD 5.25in */ #endif }; #ifdef PC98 #define DRVS_PER_CTLR 4 /* 4 floppies */ #else #define DRVS_PER_CTLR 2 /* 2 floppies */ #endif /***********************************************************************\ * Per controller structure. * \***********************************************************************/ static devclass_t fdc_devclass; /***********************************************************************\ * Per drive structure. * * N per controller (DRVS_PER_CTLR) * \***********************************************************************/ struct fd_data { struct fdc_data *fdc; /* pointer to controller structure */ int fdsu; /* this units number on this controller */ int type; /* Drive type (FD_1440...) */ struct fd_type *ft; /* pointer to the type descriptor */ int flags; #define FD_OPEN 0x01 /* it's open */ #define FD_ACTIVE 0x02 /* it's active */ #define FD_MOTOR 0x04 /* motor should be on */ #define FD_MOTOR_WAIT 0x08 /* motor coming up */ int skip; int hddrv; #define FD_NO_TRACK -2 int track; /* where we think the head is */ int options; /* user configurable options, see ioctl_fd.h */ struct callout_handle toffhandle; struct callout_handle tohandle; struct devstat device_stats; #ifdef DEVFS void *bdevs[1 + NUMDENS + MAXPARTITIONS]; void *cdevs[1 + NUMDENS + MAXPARTITIONS]; #endif #ifdef PC98 int pc98_trans; #endif device_t dev; fdu_t fdu; }; static devclass_t fd_devclass; #ifdef EPSON_NRDISK typedef unsigned int nrd_t; #define P_NRD_ADDRH 0xc24 #define P_NRD_ADDRM 0xc22 #define P_NRD_ADDRL 0xc20 #define P_NRD_CHECK 0xc20 #define P_NRD_DATA 0xc26 #define P_NRD_LED 0xc36 #define B_NRD_CHK 0x80 #define B_NRD_LED 0x40 #define A_NRD_INFO 0x2 #define A_NRD_BASE 0x400 #define NRD_STATUS 0x0 #define NRD_ST0_HD 0x04 static fdu_t nrdu=-1; static int nrdsec=0; static nrd_t nrdblkn=0; static nrd_t nrdaddr=0x0; #define nrd_check_ready() ({ \ (epson_inb(P_NRD_CHECK) & B_NRD_CHK) ? 0 : 1; \ }) #define nrd_LED_on() epson_outb(P_NRD_LED, B_NRD_LED) #define nrd_LED_off() epson_outb(P_NRD_LED, ~B_NRD_LED) #define nrd_trac() ((int)(nrd_info(nrdaddr) & 0xff)) #define nrd_head() ((int)((nrd_info(nrdaddr) >> 8) & 0xff)) #define nrd_sec() ((int)(nrd_info(nrdaddr + 2) & 0xff)) #define nrd_secsize() ((int)((nrd_info(A_NRD_INFO) >> 8) & 0xff)) #define nrd_addrset(p) nrd_addr((nrd_t)((nrd_t)p+A_NRD_BASE)) static inline void nrd_addr(addr) nrd_t addr; { epson_outb(P_NRD_ADDRH, (u_char)((addr >> 16) & 0x1f)); epson_outb(P_NRD_ADDRM, (u_char)((addr >> 8) & 0xff)); epson_outb(P_NRD_ADDRL, (u_char)(addr & 0xff)); } static inline u_short nrd_info(addr) nrd_t addr; { u_short tmp; nrd_addr(addr); outb(0x43f, 0x42); tmp = (short)inw(P_NRD_DATA); outb(0x43f, 0x40); return ((u_short)tmp); } #endif /* EPSON_NRDISK */ /***********************************************************************\ * Throughout this file the following conventions will be used: * * fd is a pointer to the fd_data struct for the drive in question * * fdc is a pointer to the fdc_data struct for the controller * * fdu is the floppy drive unit number * * fdcu is the floppy controller unit number * * fdsu is the floppy drive unit number on that controller. (sub-unit) * \***********************************************************************/ #ifdef FDC_YE #include "card.h" static int yeattach(struct isa_device *); #endif /* needed for ft driver, thus exported */ int in_fdc(struct fdc_data *); int out_fdc(struct fdc_data *, int); /* internal functions */ static void fdc_add_device(device_t, const char *, int); static void fdc_intr(void *); static void set_motor(struct fdc_data *, int, int); # define TURNON 1 # define TURNOFF 0 static timeout_t fd_turnoff; static timeout_t fd_motor_on; static void fd_turnon(struct fd_data *); static void fdc_reset(fdc_p); static int fd_in(struct fdc_data *, int *); static void fdstart(struct fdc_data *); static timeout_t fd_iotimeout; static timeout_t fd_pseudointr; static int fdstate(struct fdc_data *); static int retrier(struct fdc_data *); static int fdformat(dev_t, struct fd_formb *, struct proc *); static int enable_fifo(fdc_p fdc); static int fifo_threshold = 8; /* XXX: should be accessible via sysctl */ #define DEVIDLE 0 #define FINDWORK 1 #define DOSEEK 2 #define SEEKCOMPLETE 3 #define IOCOMPLETE 4 #define RECALCOMPLETE 5 #define STARTRECAL 6 #define RESETCTLR 7 #define SEEKWAIT 8 #define RECALWAIT 9 #define MOTORWAIT 10 #define IOTIMEDOUT 11 #define RESETCOMPLETE 12 #ifdef FDC_YE #define PIOREAD 13 #endif #ifdef FDC_DEBUG static char const * const fdstates[] = { "DEVIDLE", "FINDWORK", "DOSEEK", "SEEKCOMPLETE", "IOCOMPLETE", "RECALCOMPLETE", "STARTRECAL", "RESETCTLR", "SEEKWAIT", "RECALWAIT", "MOTORWAIT", "IOTIMEDOUT", "RESETCOMPLETE", #ifdef FDC_YE "PIOREAD", #endif }; /* CAUTION: fd_debug causes huge amounts of logging output */ static int volatile fd_debug = 0; #define TRACE0(arg) if(fd_debug) printf(arg) #define TRACE1(arg1, arg2) if(fd_debug) printf(arg1, arg2) #else /* FDC_DEBUG */ #define TRACE0(arg) #define TRACE1(arg1, arg2) #endif /* FDC_DEBUG */ #ifdef FDC_YE #if NCARD > 0 #include #include #include #include #include /* * PC-Card (PCMCIA) specific code. */ static int yeinit(struct pccard_devinfo *); /* init device */ static void yeunload(struct pccard_devinfo *); /* Disable driver */ static int yeintr(struct pccard_devinfo *); /* Interrupt handler */ PCCARD_MODULE(fdc, yeinit, yeunload, yeintr, 0, bio_imask); /* * this is the secret PIO data port (offset from base) */ #define FDC_YE_DATAPORT 6 /* * Initialize the device - called from Slot manager. */ static int yeinit(struct pccard_devinfo *devi) { fdc_p fdc = &fdc_data[devi->isahd.id_unit]; /* validate unit number. */ if (devi->isahd.id_unit >= NFDC) return(ENODEV); fdc->baseport = devi->isahd.id_iobase; /* * reset controller */ outb(fdc->baseport+FDOUT, 0); DELAY(100); outb(fdc->baseport+FDOUT, FDO_FRST); /* * wire into system */ if (yeattach(&devi->isahd) == 0) return(ENXIO); return(0); } /* * yeunload - unload the driver and clear the table. * XXX TODO: * This is usually called when the card is ejected, but * can be caused by a modunload of a controller driver. * The idea is to reset the driver's view of the device * and ensure that any driver entry points such as * read and write do not hang. */ static void yeunload(struct pccard_devinfo *devi) { if (fd_data[devi->isahd.id_unit].type == NO_TYPE) return; /* * this prevents Fdopen() and fdstrategy() from attempting * to access unloaded controller */ fd_data[devi->isahd.id_unit].type = NO_TYPE; printf("fdc%d: unload\n", devi->isahd.id_unit); } /* * yeintr - Shared interrupt called from * front end of PC-Card handler. */ static int yeintr(struct pccard_devinfo *devi) { fdintr((fdcu_t)devi->isahd.id_unit); return(1); } #endif /* NCARD > 0 */ #endif /* FDC_YE */ static d_open_t Fdopen; /* NOTE, not fdopen */ static d_read_t fdread; static d_write_t fdwrite; static d_close_t fdclose; static d_ioctl_t fdioctl; static d_strategy_t fdstrategy; /* even if SLICE defined, these are needed for the ft support. */ #define CDEV_MAJOR 9 #define BDEV_MAJOR 2 static int fdc_err(struct fdc_data *fdc, const char *s) { fdc->fdc_errs++; if (s) { if (fdc->fdc_errs < FDC_ERRMAX) { device_print_prettyname(fdc->fdc_dev); printf("%s", s); } else if (fdc->fdc_errs == FDC_ERRMAX) { device_print_prettyname(fdc->fdc_dev); printf("too many errors, not logging any more\n"); } } return FD_FAILED; } /* * fd_cmd: Send a command to the chip. Takes a varargs with this structure: * Unit number, * # of output bytes, output bytes as ints ..., * # of input bytes, input bytes as ints ... */ static int fd_cmd(struct fdc_data *fdc, int n_out, ...) { u_char cmd; int n_in; int n; va_list ap; va_start(ap, n_out); cmd = (u_char)(va_arg(ap, int)); va_end(ap); va_start(ap, n_out); for (n = 0; n < n_out; n++) { if (out_fdc(fdc, va_arg(ap, int)) < 0) { char msg[50]; snprintf(msg, sizeof(msg), "cmd %x failed at out byte %d of %d\n", cmd, n + 1, n_out); return fdc_err(fdc, msg); } } n_in = va_arg(ap, int); for (n = 0; n < n_in; n++) { int *ptr = va_arg(ap, int *); if (fd_in(fdc, ptr) < 0) { char msg[50]; snprintf(msg, sizeof(msg), "cmd %02x failed at in byte %d of %d\n", cmd, n + 1, n_in); return fdc_err(fdc, msg); } } return 0; } static int enable_fifo(fdc_p fdc) { int i, j; if ((fdc->flags & FDC_HAS_FIFO) == 0) { /* * XXX: * Cannot use fd_cmd the normal way here, since * this might be an invalid command. Thus we send the * first byte, and check for an early turn of data directon. */ if (out_fdc(fdc, I8207X_CONFIGURE) < 0) return fdc_err(fdc, "Enable FIFO failed\n"); /* If command is invalid, return */ j = 100000; while ((i = inb(fdc->baseport + FDSTS) & (NE7_DIO | NE7_RQM)) != NE7_RQM && j-- > 0) if (i == (NE7_DIO | NE7_RQM)) { fdc_reset(fdc); return FD_FAILED; } if (j<0 || fd_cmd(fdc, 3, 0, (fifo_threshold - 1) & 0xf, 0, 0) < 0) { fdc_reset(fdc); return fdc_err(fdc, "Enable FIFO failed\n"); } fdc->flags |= FDC_HAS_FIFO; return 0; } if (fd_cmd(fdc, 4, I8207X_CONFIGURE, 0, (fifo_threshold - 1) & 0xf, 0, 0) < 0) return fdc_err(fdc, "Re-enable FIFO failed\n"); return 0; } static int fd_sense_drive_status(fdc_p fdc, int *st3p) { int st3; if (fd_cmd(fdc, 2, NE7CMD_SENSED, fdc->fdu, 1, &st3)) { return fdc_err(fdc, "Sense Drive Status failed\n"); } if (st3p) *st3p = st3; return 0; } static int fd_sense_int(fdc_p fdc, int *st0p, int *cylp) { int cyl, st0, ret; #ifdef EPSON_NRDISK if (fdc->fdu == nrdu) { if (fdc->fd->track >= 0) nrdaddr = (fdc->fd->track + 1) * 8; else nrdaddr = 0x0; *st0p = nrd_head() ? NRD_ST0_HD : NRD_STATUS; *cylp = nrd_trac(); } else { #endif /* EPSON_NRDISK */ ret = fd_cmd(fdc, 1, NE7CMD_SENSEI, 1, &st0); if (ret) { (void)fdc_err(fdc, "sense intr err reading stat reg 0\n"); return ret; } if (st0p) *st0p = st0; if ((st0 & NE7_ST0_IC) == NE7_ST0_IC_IV) { /* * There doesn't seem to have been an interrupt. */ return FD_NOT_VALID; } if (fd_in(fdc, &cyl) < 0) { return fdc_err(fdc, "can't get cyl num\n"); } if (cylp) *cylp = cyl; #ifdef EPSON_NRDISK } #endif /* EPSON_NRDISK */ return 0; } static int fd_read_status(fdc_p fdc, int fdsu) { int i, ret; for (i = 0; i < 7; i++) { /* * XXX types are poorly chosen. Only bytes can by read * from the hardware, but fdc->status[] wants u_ints and * fd_in() gives ints. */ int status; #ifdef EPSON_NRDISK if (fdc->fdu == nrdu) { switch (i) { case 0: fdc->status[i] = nrd_head() ? NRD_ST0_HD : NRD_STATUS; break; case 1: fdc->status[i] = NRD_STATUS; break; case 2: fdc->status[i] = NRD_STATUS; break; case 3: fdc->status[i] = nrd_trac(); break; case 4: fdc->status[i] = nrd_head(); break; case 5: fdc->status[i] = nrdsec; break; case 6: fdc->status[i] = nrd_secsize(); break; } ret = 0; } else { #endif /* EPSON_NRDISK */ ret = fd_in(fdc, &status); fdc->status[i] = status; if (ret != 0) break; #ifdef EPSON_NRDISK } #endif /* EPSON_NRDISK */ } if (ret == 0) fdc->flags |= FDC_STAT_VALID; else fdc->flags &= ~FDC_STAT_VALID; return ret; } /****************************************************************************/ /* autoconfiguration stuff */ /****************************************************************************/ #ifdef PC98 static int pc98_trans = 0; /* 0 : HD , 1 : DD , 2 : 1.44 */ static int pc98_trans_prev = 0; static void set_density(fdc_p fdc) { /* always motor on */ outb(IO_FDPORT, (pc98_trans != 1 ? FDP_FDDEXC : 0) | FDP_PORTEXC); DELAY(100); outb(fdc->baseport + FDOUT, FDO_RST | FDO_DMAE); /* in the case of note W, always inhibit 100ms timer */ } static int pc98_fd_check_ready(fdu_t fdu) { fd_p fd = devclass_get_softc(fd_devclass, fdu); struct fdc_data *fdc = fd->fdc; int retry = 0; #ifdef EPSON_NRDISK if (fdu == nrdu) { if (nrd_check_ready()) return 0; else return -1; } #endif while (retry++ < 30000) { set_motor(fdc, fd->fdsu, TURNON); out_fdc(fdc, NE7CMD_SENSED); /* Sense Drive Status */ DELAY(100); out_fdc(fdc, fdu); /* Drive number */ DELAY(100); if ((in_fdc(fdc) & NE7_ST3_RD)){ outb(fdc->baseport + FDOUT, FDO_DMAE | FDO_MTON); DELAY(10); return 0; } } return -1; } #endif static int fdc_probe(device_t dev) { int error, i, ic_type; struct fdc_data *fdc; char myname[8]; /* better be long enough */ fdc = device_get_softc(dev); bzero(fdc, sizeof *fdc); fdc->fdc_dev = dev; fdc->rid_ioport = fdc->rid_irq = fdc->rid_drq = 0; fdc->res_ioport = fdc->res_irq = fdc->res_drq = 0; fdc->res_ioport = bus_alloc_resource(dev, SYS_RES_IOPORT, &fdc->rid_ioport, 0ul, ~0ul, IO_FDCSIZE, RF_ACTIVE); if (fdc->res_ioport == 0) { device_print_prettyname(dev); printf("cannot reserve I/O port range\n"); error = ENXIO; goto out; } fdc->baseport = fdc->res_ioport->r_start; fdc->res_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &fdc->rid_irq, 0ul, ~0ul, 1, RF_ACTIVE); if (fdc->res_irq == 0) { device_print_prettyname(dev); printf("cannot reserve interrupt line\n"); error = ENXIO; goto out; } fdc->res_drq = bus_alloc_resource(dev, SYS_RES_DRQ, &fdc->rid_drq, 0ul, ~0ul, 1, RF_ACTIVE); if (fdc->res_drq == 0) { device_print_prettyname(dev); printf("cannot reserve DMA request line\n"); error = ENXIO; goto out; } fdc->dmachan = fdc->res_drq->r_start; error = BUS_SETUP_INTR(device_get_parent(dev), dev, fdc->res_irq, fdc_intr, fdc, &fdc->fdc_intr); #ifndef PC98 /* First - lets reset the floppy controller */ outb(fdc->baseport + FDOUT, 0); DELAY(100); outb(fdc->baseport + FDOUT, FDO_FRST); #endif /* see if it can handle a command */ #ifdef PC98 if (fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(4, 240), NE7_SPEC_2(2, 0), 0)) { error = ENXIO; goto out; } #else if (fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0), 0)) { error = ENXIO; goto out; } #endif #ifndef PC98 if (fd_cmd(fdc, 1, NE7CMD_VERSION, 1, &ic_type) == 0) { ic_type = (u_char)ic_type; switch (ic_type) { case 0x80: device_set_desc(dev, "NEC 765 or clone"); fdc->fdct = FDC_NE765; break; case 0x81: device_set_desc(dev, "Intel 82077 or clone"); fdc->fdct = FDC_I82077; break; case 0x90: device_set_desc(dev, "NEC 72065B or clone"); fdc->fdct = FDC_NE72065; break; default: device_set_desc(dev, "generic floppy controller"); fdc->fdct = FDC_UNKNOWN; break; } } #endif snprintf(myname, sizeof(myname), "%s%d", device_get_name(dev), device_get_unit(dev)); for (i = resource_query_string(-1, "at", myname); i != -1; i = resource_query_string(i, "at", myname)) fdc_add_device(dev, resource_query_name(i), resource_query_unit(i)); #ifdef FDC_YE /* * don't succeed on probe; wait * for PCCARD subsystem to do it */ if (dev->id_flags & FDC_IS_PCMCIA) return(0); #endif return (0); out: if (fdc->fdc_intr) BUS_TEARDOWN_INTR(device_get_parent(dev), dev, fdc->res_irq, fdc->fdc_intr); if (fdc->res_irq != 0) { bus_deactivate_resource(dev, SYS_RES_IRQ, fdc->rid_irq, fdc->res_irq); bus_release_resource(dev, SYS_RES_IRQ, fdc->rid_irq, fdc->res_irq); } if (fdc->res_ioport != 0) { bus_deactivate_resource(dev, SYS_RES_IOPORT, fdc->rid_ioport, fdc->res_ioport); bus_release_resource(dev, SYS_RES_IOPORT, fdc->rid_ioport, fdc->res_ioport); } if (fdc->res_drq != 0) { bus_deactivate_resource(dev, SYS_RES_DRQ, fdc->rid_drq, fdc->res_drq); bus_release_resource(dev, SYS_RES_DRQ, fdc->rid_drq, fdc->res_drq); } return (error); } /* * Aped dfr@freebsd.org's isa_add_device(). */ static void fdc_add_device(device_t dev, const char *name, int unit) { int disabled, *ivar; device_t child; ivar = malloc(sizeof *ivar, M_DEVBUF /* XXX */, M_NOWAIT); if (ivar == 0) return; if (resource_int_value(name, unit, "drive", ivar) == 0) *ivar = 0; child = device_add_child(dev, name, unit, ivar); if (child == 0) return; if (resource_int_value(name, unit, "disabled", &disabled) == 0) device_disable(child); } static int fdc_attach(device_t dev) { struct fdc_data *fdc = device_get_softc(dev); fdcu_t fdcu = device_get_unit(dev); fdc->fdcu = fdcu; fdc->flags |= FDC_ATTACHED; /* Acquire the DMA channel forever, The driver will do the rest */ /* XXX should integrate with rman */ isa_dma_acquire(fdc->dmachan); isa_dmainit(fdc->dmachan, 128 << 3 /* XXX max secsize */); fdc->state = DEVIDLE; #ifdef PC98 /* reset controller, turn motor off, clear fdout mirror reg */ fdc_reset(fdc); #else /* reset controller, turn motor off, clear fdout mirror reg */ outb(fdc->baseport + FDOUT, ((fdc->fdout = 0))); #endif bufq_init(&fdc->head); #ifdef FIFO_BEFORE_MOTORON /* Hmm, this doesn't work here - is set_motor() magic? -Peter */ if (fdc->fdct != FDC_NE765 && fdc->fdct != FDC_UNKNOWN && enable_fifo(fdc) == 0) { device_print_prettyname(dev); printf("FIFO enabled, %d bytes threshold\n", fifo_threshold); } #endif /* * Probe and attach any children as were configured above. */ return (bus_generic_attach(dev)); } static void fdc_print_child(device_t me, device_t child) { printf(" at %s%d drive %d", device_get_name(me), device_get_unit(me), *(int *)device_get_ivars(child)); } static int fd_probe(device_t dev) { int i; u_int fdt, st0, st3; struct fd_data *fd; struct fdc_data *fdc; fdsu_t fdsu; #ifndef FIFO_BEFORE_MOTORON static int fd_fifo = 0; #endif fdsu = *(int *)device_get_ivars(dev); /* xxx cheat a bit... */ fd = device_get_softc(dev); fdc = device_get_softc(device_get_parent(dev)); bzero(fd, sizeof *fd); fd->dev = dev; fd->fdc = fdc; fd->fdsu = fdsu; fd->fdu = device_get_unit(dev); #ifdef PC98 /* look up what bios thinks we have */ switch (fd->fdu) { case 0: case 1: case 2: case 3: if ((PC98_SYSTEM_PARAMETER(0x5ae) >> fd->fdu) & 0x01) fdt = FDT_144M; #ifdef EPSON_NRDISK else if ((PC98_SYSTEM_PARAMETER(0x55c) >> fd->fdu) & 0x01) { fdt = FDT_12M; switch (epson_machine_id) { case 0x20: case 0x27: if ((PC98_SYSTEM_PARAMETER(0x488) >> fd->fdu) & 0x01) { if (nrd_check_ready()) { nrd_LED_on(); nrdu = fd->fdu; } else { fdt = FDT_NONE; } } } } #else /* !EPSON_NRDISK */ else if ((PC98_SYSTEM_PARAMETER(0x55c) >> fd->fdu) & 0x01) { fdt = FDT_12M; switch (epson_machine_id) { case 0x20: case 0x27: if ((PC98_SYSTEM_PARAMETER(0x488) >> fd->fdu) & 0x01) fdt = FDT_NONE; } } #endif /* EPSON_NRDISK */ else fdt = FDT_NONE; break; default: fdt = FDT_NONE; break; } #else /* look up what bios thinks we have */ switch (fd->fdu) { case 0: if (isa_get_flags(fdc->fdc_dev) & FDC_PRETEND_D0) fdt = RTCFDT_144M | RTCFDT_144M_PRETENDED; else fdt = (rtcin(RTC_FDISKETTE) & 0xf0); break; case 1: fdt = ((rtcin(RTC_FDISKETTE) << 4) & 0xf0); break; default: fdt = RTCFDT_NONE; break; } #endif /* is there a unit? */ #ifdef PC98 if (fdt == FDT_NONE) return (ENXIO); #else if (fdt == RTCFDT_NONE) return (ENXIO); #endif #ifndef PC98 /* select it */ set_motor(fdc, fdsu, TURNON); DELAY(1000000); /* 1 sec */ #ifndef FIFO_BEFORE_MOTORON if (fd_fifo == 0 && fdc->fdct != FDC_NE765 && fdc->fdct != FDC_UNKNOWN && enable_fifo(fdc) == 0) { device_print_prettyname(device_get_parent(dev)); printf("FIFO enabled, %d bytes threshold\n", fifo_threshold); } fd_fifo = 1; #endif if ((fd_cmd(fdc, 2, NE7CMD_SENSED, fdsu, 1, &st3) == 0) && (st3 & NE7_ST3_T0)) { /* if at track 0, first seek inwards */ /* seek some steps: */ fd_cmd(fdc, 3, NE7CMD_SEEK, fdsu, 10, 0); DELAY(300000); /* ...wait a moment... */ fd_sense_int(fdc, 0, 0); /* make ctrlr happy */ } /* If we're at track 0 first seek inwards. */ if ((fd_sense_drive_status(fdc, &st3) == 0) && (st3 & NE7_ST3_T0)) { /* Seek some steps... */ if (fd_cmd(fdc, 3, NE7CMD_SEEK, fdsu, 10, 0) == 0) { /* ...wait a moment... */ DELAY(300000); /* make ctrlr happy: */ fd_sense_int(fdc, 0, 0); } } for (i = 0; i < 2; i++) { /* * we must recalibrate twice, just in case the * heads have been beyond cylinder 76, since most * FDCs still barf when attempting to recalibrate * more than 77 steps */ /* go back to 0: */ if (fd_cmd(fdc, 2, NE7CMD_RECAL, fdsu, 0) == 0) { /* a second being enough for full stroke seek*/ DELAY(i == 0 ? 1000000 : 300000); /* anything responding? */ if (fd_sense_int(fdc, &st0, 0) == 0 && (st0 & NE7_ST0_EC) == 0) break; /* already probed succesfully */ } } set_motor(fdc, fdsu, TURNOFF); if (st0 & NE7_ST0_EC) /* no track 0 -> no drive present */ return (ENXIO); #endif /* PC98 */ fd->track = FD_NO_TRACK; fd->fdc = fdc; fd->fdsu = fdsu; fd->options = 0; callout_handle_init(&fd->toffhandle); callout_handle_init(&fd->tohandle); #ifdef PC98 switch (fdt) { case FDT_12M: #ifdef EPSON_NRDISK if (fdu == nrdu) { device_set_desc(dev, "EPSON RAM DRIVE"); nrd_LED_off(); } else device_set_desc(dev, "1M/640M FDD"); #else device_set_desc(dev, "1M/640M FDD"); #endif fd->type = FD_1200; fd->pc98_trans = 0; break; case FDT_144M: device_set_desc(dev, "1.44M FDD"); fd->type = FD_1200; fd->pc98_trans = 0; outb(0x4be, (fd->fdu << 5) | 0x10); break; default: return (ENXIO); } #else switch (fdt) { case RTCFDT_12M: device_set_desc(dev, "1200-KB 5.25\" drive"); fd->type = FD_1200; break; case RTCFDT_144M | RTCFDT_144M_PRETENDED: device_set_desc(dev, "config-pretended 1440-MB 3.5\" drive"); fdt = RTCFDT_144M; fd->type = FD_1440; case RTCFDT_144M: device_set_desc(dev, "1440-KB 3.5\" drive"); fd->type = FD_1440; break; case RTCFDT_288M: case RTCFDT_288M_1: device_set_desc(dev, "2880-KB 3.5\" drive (in 1440-KB mode)"); fd->type = FD_1440; break; case RTCFDT_360K: device_set_desc(dev, "360-KB 5.25\" drive"); fd->type = FD_360; break; case RTCFDT_720K: printf("720-KB 3.5\" drive"); fd->type = FD_720; break; default: return (ENXIO); } #endif return (0); } static int fd_attach(device_t dev) { struct fd_data *fd; fd = device_get_softc(dev); #ifdef DEVFS /* XXX bitrot */ mynor = fdu << 6; fd->bdevs[0] = devfs_add_devswf(&fd_cdevsw, mynor, DV_BLK, UID_ROOT, GID_OPERATOR, 0640, "fd%d", fdu); fd->cdevs[0] = devfs_add_devswf(&fd_cdevsw, mynor, DV_CHR, UID_ROOT, GID_OPERATOR, 0640, "rfd%d", fdu); for (i = 1; i < 1 + NUMDENS; i++) { /* * XXX this and the lookup in Fdopen() should be * data driven. */ #ifdef PC98 switch (fd->type) { case FDT_12M: if (i != FD_1200 && i != FD_1232 && i != FD_720 && i != FD_640) continue; break; case FDT_144M: if (i != FD_1200 && i != FD_1232 && i != FD_720 && i != FD_640 && i != FD_1440) continue; break; } #else switch (fd->type) { case FD_360: if (i != FD_360) continue; break; case FD_720: if (i != FD_720 && i != FD_800 && i != FD_820) continue; break; case FD_1200: if (i != FD_360 && i != FD_720 && i != FD_800 && i != FD_820 && i != FD_1200 && i != FD_1440 && i != FD_1480) continue; break; case FD_1440: if (i != FD_720 && i != FD_800 && i != FD_820 && i != FD_1200 && i != FD_1440 && i != FD_1480 && i != FD_1720) continue; break; } #endif #ifdef PC98 if (i == FD_1232) typesize = fd_types[i - 1].size; else typesize = fd_types[i - 1].size / 2; #else typesize = fd_types[i - 1].size / 2; /* * XXX all these conversions give bloated code and * confusing names. */ if (typesize == 1476) typesize = 1480; if (typesize == 1722) typesize = 1720; #endif typemynor = mynor | i; fd->bdevs[i] = devfs_add_devswf(&fd_cdevsw, typemynor, DV_BLK, UID_ROOT, GID_OPERATOR, 0640, "fd%d.%d", fdu, typesize); fd->cdevs[i] = devfs_add_devswf(&fd_cdevsw, typemynor, DV_CHR, UID_ROOT, GID_OPERATOR, 0640, "rfd%d.%d", fdu, typesize); } for (i = 0; i < MAXPARTITIONS; i++) { fd->bdevs[1 + NUMDENS + i] = devfs_makelink(fd->bdevs[0], "fd%d%c", fdu, 'a' + i); fd->cdevs[1 + NUMDENS + i] = devfs_makelink(fd->cdevs[0], "rfd%d%c", fdu, 'a' + i); } #endif /* DEVFS */ /* * Export the drive to the devstat interface. */ devstat_add_entry(&fd->device_stats, device_get_name(dev), device_get_unit(dev), 512, DEVSTAT_NO_ORDERED_TAGS, DEVSTAT_TYPE_FLOPPY | DEVSTAT_TYPE_IF_OTHER, DEVSTAT_PRIORITY_FD); return (0); } #ifdef FDC_YE /* * this is a subset of fdattach() optimized for the Y-E Data * PCMCIA floppy drive. */ static int yeattach(struct isa_device *dev) { fdcu_t fdcu = dev->id_unit; fdc_p fdc = fdc_data + fdcu; fdsu_t fdsu = 0; /* assume 1 drive per YE controller */ fdu_t fdu; fd_p fd; int st0, st3, i; #ifdef DEVFS int mynor; int typemynor; int typesize; #endif fdc->fdcu = fdcu; /* * the FDC_PCMCIA flag is used to to indicate special PIO is used * instead of DMA */ fdc->flags = FDC_ATTACHED|FDC_PCMCIA; fdc->state = DEVIDLE; /* reset controller, turn motor off, clear fdout mirror reg */ outb(fdc->baseport + FDOUT, ((fdc->fdout = 0))); bufq_init(&fdc->head); /* * assume 2 drives/ "normal" controller */ fdu = fdcu * 2; if (fdu >= NFD) { printf("fdu %d >= NFD\n",fdu); return(0); }; fd = &fd_data[fdu]; set_motor(fdcu, fdsu, TURNON); DELAY(1000000); /* 1 sec */ fdc->fdct = FDC_NE765; if ((fd_cmd(fdcu, 2, NE7CMD_SENSED, fdsu, 1, &st3) == 0) && (st3 & NE7_ST3_T0)) { /* if at track 0, first seek inwards */ /* seek some steps: */ (void)fd_cmd(fdcu, 3, NE7CMD_SEEK, fdsu, 10, 0); DELAY(300000); /* ...wait a moment... */ (void)fd_sense_int(fdc, 0, 0); /* make ctrlr happy */ } /* If we're at track 0 first seek inwards. */ if ((fd_sense_drive_status(fdc, &st3) == 0) && (st3 & NE7_ST3_T0)) { /* Seek some steps... */ if (fd_cmd(fdcu, 3, NE7CMD_SEEK, fdsu, 10, 0) == 0) { /* ...wait a moment... */ DELAY(300000); /* make ctrlr happy: */ (void)fd_sense_int(fdc, 0, 0); } } for(i = 0; i < 2; i++) { /* * we must recalibrate twice, just in case the * heads have been beyond cylinder 76, since most * FDCs still barf when attempting to recalibrate * more than 77 steps */ /* go back to 0: */ if (fd_cmd(fdcu, 2, NE7CMD_RECAL, fdsu, 0) == 0) { /* a second being enough for full stroke seek*/ DELAY(i == 0? 1000000: 300000); /* anything responding? */ if (fd_sense_int(fdc, &st0, 0) == 0 && (st0 & NE7_ST0_EC) == 0) break; /* already probed succesfully */ } } set_motor(fdcu, fdsu, TURNOFF); if (st0 & NE7_ST0_EC) /* no track 0 -> no drive present */ return(0); fd->track = FD_NO_TRACK; fd->fdc = fdc; fd->fdsu = fdsu; fd->options = 0; printf("fdc%d: 1.44MB 3.5in PCMCIA\n", fdcu); fd->type = FD_1440; #ifdef DEVFS mynor = fdcu << 6; fd->bdevs[0] = devfs_add_devswf(&fd_cdevsw, mynor, DV_BLK, UID_ROOT, GID_OPERATOR, 0640, "fd%d", fdu); fd->cdevs[0] = devfs_add_devswf(&fd_cdevsw, mynor, DV_CHR, UID_ROOT, GID_OPERATOR, 0640, "rfd%d", fdu); /* * XXX this and the lookup in Fdopen() should be * data driven. */ typemynor = mynor | FD_1440; typesize = fd_types[FD_1440 - 1].size / 2; /* * XXX all these conversions give bloated code and * confusing names. */ if (typesize == 1476) typesize = 1480; if (typesize == 1722) typesize = 1720; fd->bdevs[FD_1440] = devfs_add_devswf(&fd_cdevsw, typemynor, DV_BLK, UID_ROOT, GID_OPERATOR, 0640, "fd%d.%d", fdu, typesize); fd->cdevs[FD_1440] = devfs_add_devswf(&fd_cdevsw, typemynor, DV_CHR, UID_ROOT, GID_OPERATOR, 0640,"rfd%d.%d", fdu, typesize); for (i = 0; i < MAXPARTITIONS; i++) { fd->bdevs[1 + NUMDENS + i] = devfs_makelink(fd->bdevs[0], "fd%d%c", fdu, 'a' + i); fd->cdevs[1 + NUMDENS + i] = devfs_makelink(fd->cdevs[0], "rfd%d%c", fdu, 'a' + i); } #endif /* DEVFS */ return (1); } #endif /****************************************************************************/ /* motor control stuff */ /* remember to not deselect the drive we're working on */ /****************************************************************************/ static void set_motor(struct fdc_data *fdc, int fdsu, int turnon) { int fdout = fdc->fdout; int needspecify = 0; #ifdef PC98 outb(IO_FDPORT, (pc98_trans != 1 ? FDP_FDDEXC : 0)|FDP_PORTEXC); DELAY(10); fdout = FDO_DMAE|FDO_MTON; #else if(turnon) { fdout &= ~FDO_FDSEL; fdout |= (FDO_MOEN0 << fdsu) + fdsu; } else fdout &= ~(FDO_MOEN0 << fdsu); if(!turnon && (fdout & (FDO_MOEN0+FDO_MOEN1+FDO_MOEN2+FDO_MOEN3)) == 0) /* gonna turn off the last drive, put FDC to bed */ fdout &= ~ (FDO_FRST|FDO_FDMAEN); else { /* make sure controller is selected and specified */ if((fdout & (FDO_FRST|FDO_FDMAEN)) == 0) needspecify = 1; fdout |= (FDO_FRST|FDO_FDMAEN); } #endif outb(fdc->baseport+FDOUT, fdout); fdc->fdout = fdout; TRACE1("[0x%x->FDOUT]", fdout); if (needspecify) { /* * XXX * special case: since we have just woken up the FDC * from its sleep, we silently assume the command will * be accepted, and do not test for a timeout */ #ifdef PC98 (void)fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(4, 240), NE7_SPEC_2(2, 0), 0); #else (void)fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0), 0); #endif if (fdc->flags & FDC_HAS_FIFO) (void) enable_fifo(fdc); } } static void fd_turnoff(void *xfd) { int s; fd_p fd = xfd; TRACE1("[fd%d: turnoff]", fd->fdu); /* * Don't turn off the motor yet if the drive is active. * XXX shouldn't even schedule turnoff until drive is inactive * and nothing is queued on it. */ if (fd->fdc->state != DEVIDLE && fd->fdc->fdu == fd->fdu) { fd->toffhandle = timeout(fd_turnoff, fd, 4 * hz); return; } s = splbio(); fd->flags &= ~FD_MOTOR; set_motor(fd->fdc, fd->fdsu, TURNOFF); splx(s); } static void fd_motor_on(void *xfd) { int s; fd_p fd = xfd; s = splbio(); fd->flags &= ~FD_MOTOR_WAIT; if((fd->fdc->fd == fd) && (fd->fdc->state == MOTORWAIT)) { fdc_intr(fd->fdc); } splx(s); } static void fd_turnon(fd_p fd) { if(!(fd->flags & FD_MOTOR)) { fd->flags |= (FD_MOTOR + FD_MOTOR_WAIT); set_motor(fd->fdc, fd->fdsu, TURNON); timeout(fd_motor_on, fd, hz); /* in 1 sec its ok */ } } static void fdc_reset(fdc_p fdc) { /* Try a reset, keep motor on */ #ifdef PC98 set_density(fdc); if (pc98_machine_type & M_EPSON_PC98) outb(fdc->baseport + FDOUT, 0xe8); else outb(fdc->baseport + FDOUT, 0xd8); DELAY(200); outb(fdc->baseport + FDOUT, 0x18); DELAY(10); #else outb(fdc->baseport + FDOUT, fdc->fdout & ~(FDO_FRST|FDO_FDMAEN)); TRACE1("[0x%x->FDOUT]", fdc->fdout & ~(FDO_FRST|FDO_FDMAEN)); DELAY(100); /* enable FDC, but defer interrupts a moment */ outb(fdc->baseport + FDOUT, fdc->fdout & ~FDO_FDMAEN); TRACE1("[0x%x->FDOUT]", fdc->fdout & ~FDO_FDMAEN); DELAY(100); outb(fdc->baseport + FDOUT, fdc->fdout); TRACE1("[0x%x->FDOUT]", fdc->fdout); #endif /* XXX after a reset, silently believe the FDC will accept commands */ #ifdef PC98 (void)fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(4, 240), NE7_SPEC_2(2, 0), 0); #else (void)fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0), 0); #endif if (fdc->flags & FDC_HAS_FIFO) (void) enable_fifo(fdc); } /****************************************************************************/ /* fdc in/out */ /****************************************************************************/ int in_fdc(struct fdc_data *fdc) { int baseport = fdc->baseport; int i, j = 100000; while ((i = inb(baseport+FDSTS) & (NE7_DIO|NE7_RQM)) != (NE7_DIO|NE7_RQM) && j-- > 0) if (i == NE7_RQM) return fdc_err(fdc, "ready for output in input\n"); if (j <= 0) return fdc_err(fdc, bootverbose? "input ready timeout\n": 0); #ifdef FDC_DEBUG i = inb(baseport+FDDATA); TRACE1("[FDDATA->0x%x]", (unsigned char)i); return(i); #else /* !FDC_DEBUG */ return inb(baseport+FDDATA); #endif /* FDC_DEBUG */ } /* * fd_in: Like in_fdc, but allows you to see if it worked. */ static int fd_in(struct fdc_data *fdc, int *ptr) { int baseport = fdc->baseport; int i, j = 100000; while ((i = inb(baseport+FDSTS) & (NE7_DIO|NE7_RQM)) != (NE7_DIO|NE7_RQM) && j-- > 0) if (i == NE7_RQM) return fdc_err(fdc, "ready for output in input\n"); if (j <= 0) return fdc_err(fdc, bootverbose? "input ready timeout\n": 0); #ifdef FDC_DEBUG i = inb(baseport+FDDATA); TRACE1("[FDDATA->0x%x]", (unsigned char)i); *ptr = i; return 0; #else /* !FDC_DEBUG */ i = inb(baseport+FDDATA); if (ptr) *ptr = i; return 0; #endif /* FDC_DEBUG */ } int out_fdc(struct fdc_data *fdc, int x) { int baseport = fdc->baseport; int i; /* Check that the direction bit is set */ i = 100000; while ((inb(baseport+FDSTS) & NE7_DIO) && i-- > 0); if (i <= 0) return fdc_err(fdc, "direction bit not set\n"); /* Check that the floppy controller is ready for a command */ i = 100000; while ((inb(baseport+FDSTS) & NE7_RQM) == 0 && i-- > 0); if (i <= 0) return fdc_err(fdc, bootverbose? "output ready timeout\n": 0); /* Send the command and return */ outb(baseport+FDDATA, x); TRACE1("[0x%x->FDDATA]", x); return (0); } /****************************************************************************/ /* fdopen/fdclose */ /****************************************************************************/ int Fdopen(dev_t dev, int flags, int mode, struct proc *p) { fdu_t fdu = FDUNIT(minor(dev)); int type = FDTYPE(minor(dev)); fd_p fd; fdc_p fdc; /* check bounds */ if ((fd = devclass_get_softc(fd_devclass, fdu)) == 0) return (ENXIO); fdc = fd->fdc; if ((fdc == NULL) || (fd->type == NO_TYPE)) return (ENXIO); if (type > NUMDENS) return (ENXIO); #ifdef PC98 if (pc98_fd_check_ready(fdu) == -1) return(EIO); #endif if (type == 0) type = fd->type; #ifndef PC98 else { /* * For each type of basic drive, make sure we are trying * to open a type it can do, */ if (type != fd->type) { switch (fd->type) { case FD_360: return (ENXIO); case FD_720: if ( type != FD_820 && type != FD_800 ) return (ENXIO); break; case FD_1200: switch (type) { case FD_1480: type = FD_1480in5_25; break; case FD_1440: type = FD_1440in5_25; break; case FD_820: type = FD_820in5_25; break; case FD_800: type = FD_800in5_25; break; case FD_720: type = FD_720in5_25; break; case FD_360: type = FD_360in5_25; break; default: return(ENXIO); } break; case FD_1440: if ( type != FD_1720 && type != FD_1480 && type != FD_1200 && type != FD_820 && type != FD_800 && type != FD_720 ) return(ENXIO); break; } } } #endif fd->ft = fd_types + type - 1; fd->flags |= FD_OPEN; device_busy(fd->dev); device_busy(fd->fdc->fdc_dev); return 0; } int fdclose(dev_t dev, int flags, int mode, struct proc *p) { fdu_t fdu = FDUNIT(minor(dev)); struct fd_data *fd; fd = devclass_get_softc(fd_devclass, fdu); fd->flags &= ~FD_OPEN; fd->options &= ~FDOPT_NORETRY; return (0); } static int fdread(dev_t dev, struct uio *uio, int ioflag) { return (physio(fdstrategy, NULL, dev, 1, minphys, uio)); } static int fdwrite(dev_t dev, struct uio *uio, int ioflag) { return (physio(fdstrategy, NULL, dev, 0, minphys, uio)); } /****************************************************************************/ /* fdstrategy */ /****************************************************************************/ void fdstrategy(struct buf *bp) { unsigned nblocks, blknum, cando; int s; fdu_t fdu; fdc_p fdc; fd_p fd; size_t fdblk; fdu = FDUNIT(minor(bp->b_dev)); fd = devclass_get_softc(fd_devclass, fdu); if (fd == 0) panic("fdstrategy: buf for nonexistent device (%#lx, %#lx)", (u_long)major(bp->b_dev), (u_long)minor(bp->b_dev)); fdc = fd->fdc; #ifdef FDC_YE if (fd->type == NO_TYPE) { bp->b_error = ENXIO; bp->b_flags |= B_ERROR; /* * I _refuse_ to use a goto */ biodone(bp); return; }; #endif fdblk = 128 << (fd->ft->secsize); if (!(bp->b_flags & B_FORMAT)) { if (bp->b_blkno < 0) { printf( "fd%d: fdstrat: bad request blkno = %lu, bcount = %ld\n", fdu, (u_long)bp->b_blkno, bp->b_bcount); bp->b_error = EINVAL; bp->b_flags |= B_ERROR; goto bad; } if ((bp->b_bcount % fdblk) != 0) { bp->b_error = EINVAL; bp->b_flags |= B_ERROR; goto bad; } } /* * Set up block calculations. */ if (bp->b_blkno > 20000000) { /* * Reject unreasonably high block number, prevent the * multiplication below from overflowing. */ bp->b_error = EINVAL; bp->b_flags |= B_ERROR; goto bad; } blknum = (unsigned) bp->b_blkno * DEV_BSIZE/fdblk; nblocks = fd->ft->size; bp->b_resid = 0; if (blknum + (bp->b_bcount / fdblk) > nblocks) { if (blknum <= nblocks) { cando = (nblocks - blknum) * fdblk; bp->b_resid = bp->b_bcount - cando; if (cando == 0) goto bad; /* not actually bad but EOF */ } else { bp->b_error = EINVAL; bp->b_flags |= B_ERROR; goto bad; } } bp->b_pblkno = bp->b_blkno; s = splbio(); bufqdisksort(&fdc->head, bp); untimeout(fd_turnoff, fd, fd->toffhandle); /* a good idea */ /* Tell devstat we are starting on the transaction */ devstat_start_transaction(&fd->device_stats); fdstart(fdc); splx(s); return; bad: biodone(bp); } /***************************************************************\ * fdstart * * We have just queued something.. if the controller is not busy * * then simulate the case where it has just finished a command * * So that it (the interrupt routine) looks on the queue for more* * work to do and picks up what we just added. * * If the controller is already busy, we need do nothing, as it * * will pick up our work when the present work completes * \***************************************************************/ static void fdstart(struct fdc_data *fdc) { int s; s = splbio(); if(fdc->state == DEVIDLE) { fdc_intr(fdc); } splx(s); } static void fd_iotimeout(void *xfdc) { fdc_p fdc; int s; fdc = xfdc; TRACE1("fd%d[fd_iotimeout()]", fdc->fdu); /* * Due to IBM's brain-dead design, the FDC has a faked ready * signal, hardwired to ready == true. Thus, any command * issued if there's no diskette in the drive will _never_ * complete, and must be aborted by resetting the FDC. * Many thanks, Big Blue! * The FDC must not be reset directly, since that would * interfere with the state machine. Instead, pretend that * the command completed but was invalid. The state machine * will reset the FDC and retry once. */ s = splbio(); fdc->status[0] = NE7_ST0_IC_IV; fdc->flags &= ~FDC_STAT_VALID; fdc->state = IOTIMEDOUT; fdc_intr(fdc); splx(s); } /* just ensure it has the right spl */ static void fd_pseudointr(void *xfdc) { int s; s = splbio(); fdc_intr(xfdc); splx(s); } /***********************************************************************\ * fdintr * * keep calling the state machine until it returns a 0 * * ALWAYS called at SPLBIO * \***********************************************************************/ static void fdc_intr(void *xfdc) { fdc_p fdc = xfdc; while(fdstate(fdc)) ; } #ifdef FDC_YE /* * magic pseudo-DMA initialization for YE FDC. Sets count and * direction */ #define SET_BCDR(wr,cnt,port) outb(port,(((cnt)-1) & 0xff)); \ outb(port+1,((wr ? 0x80 : 0) | ((((cnt)-1) >> 8) & 0x7f))) /* * fdcpio(): perform programmed IO read/write for YE PCMCIA floppy */ static int fdcpio(fdcu_t fdcu, long flags, caddr_t addr, u_int count) { u_char *cptr = (u_char *)addr; fdc_p fdc = &fdc_data[fdcu]; int io = fdc->baseport; if (flags & B_READ) { if (fdc->state != PIOREAD) { fdc->state = PIOREAD; return(0); }; SET_BCDR(0,count,io); insb(io+FDC_YE_DATAPORT,cptr,count); } else { outsb(io+FDC_YE_DATAPORT,cptr,count); SET_BCDR(0,count,io); }; return(1); } #endif /* FDC_YE */ /***********************************************************************\ * The controller state machine. * * if it returns a non zero value, it should be called again immediatly * \***********************************************************************/ static int fdstate(fdc_p fdc) { int read, format, head, i, sec = 0, sectrac, st0, cyl, st3; unsigned blknum = 0, b_cylinder = 0; fdu_t fdu = fdc->fdu; fd_p fd; register struct buf *bp; struct fd_formb *finfo = NULL; size_t fdblk; bp = fdc->bp; if (bp == NULL) { bp = bufq_first(&fdc->head); if (bp != NULL) { bufq_remove(&fdc->head, bp); fdc->bp = bp; } } if (bp == NULL) { /***********************************************\ * nothing left for this controller to do * * Force into the IDLE state, * \***********************************************/ fdc->state = DEVIDLE; if (fdc->fd) { device_print_prettyname(fdc->fdc_dev); printf("unexpected valid fd pointer\n"); fdc->fd = (fd_p) 0; fdc->fdu = -1; } TRACE1("[fdc%d IDLE]", fdc->fdcu); return (0); } fdu = FDUNIT(minor(bp->b_dev)); fd = devclass_get_softc(fd_devclass, fdu); fdblk = 128 << fd->ft->secsize; if (fdc->fd && (fd != fdc->fd)) { device_print_prettyname(fd->dev); printf("confused fd pointers\n"); } read = bp->b_flags & B_READ; format = bp->b_flags & B_FORMAT; if (format) { finfo = (struct fd_formb *)bp->b_data; fd->skip = (char *)&(finfo->fd_formb_cylno(0)) - (char *)finfo; } if (fdc->state == DOSEEK || fdc->state == SEEKCOMPLETE) { blknum = (unsigned) bp->b_pblkno * DEV_BSIZE/fdblk + fd->skip/fdblk; b_cylinder = blknum / (fd->ft->sectrac * fd->ft->heads); } TRACE1("fd%d", fdu); TRACE1("[%s]", fdstates[fdc->state]); TRACE1("(0x%x)", fd->flags); untimeout(fd_turnoff, fd, fd->toffhandle); fd->toffhandle = timeout(fd_turnoff, fd, 4 * hz); switch (fdc->state) { case DEVIDLE: case FINDWORK: /* we have found new work */ fdc->retry = 0; fd->skip = 0; fdc->fd = fd; fdc->fdu = fdu; #ifdef PC98 pc98_trans = fd->ft->trans; if (pc98_trans_prev != pc98_trans) { int i; set_density(fdc); for (i = 0; i < 10; i++) { outb(0x5f, 0); outb(0x5f, 0); } pc98_trans_prev = pc98_trans; } if (pc98_trans != fd->pc98_trans) { if (pc98_trans != 1 && (PC98_SYSTEM_PARAMETER(0x5ae) >> fdu) & 0x01) { outb(0x4be, (fdu << 5) | 0x10 | (pc98_trans >> 1)); outb(0x5f, 0); outb(0x5f, 0); } fd->pc98_trans = pc98_trans; } #else outb(fdc->baseport+FDCTL, fd->ft->trans); #endif TRACE1("[0x%x->FDCTL]", fd->ft->trans); /*******************************************************\ * If the next drive has a motor startup pending, then * * it will start up in its own good time * \*******************************************************/ if(fd->flags & FD_MOTOR_WAIT) { fdc->state = MOTORWAIT; return (0); /* come back later */ } /*******************************************************\ * Maybe if it's not starting, it SHOULD be starting * \*******************************************************/ #ifdef EPSON_NRDISK if (fdu != nrdu) { if (!(fd->flags & FD_MOTOR)) { fdc->state = MOTORWAIT; fd_turnon(fdu); return(0); } else /* at least make sure we are selected */ { set_motor(fdcu, fd->fdsu, TURNON); } } #else /* !EPSON_NRDISK */ if (!(fd->flags & FD_MOTOR)) { fdc->state = MOTORWAIT; fd_turnon(fd); return (0); } else /* at least make sure we are selected */ { set_motor(fdc, fd->fdsu, TURNON); } #endif if (fdc->flags & FDC_NEEDS_RESET) { fdc->state = RESETCTLR; fdc->flags &= ~FDC_NEEDS_RESET; } else fdc->state = DOSEEK; break; case DOSEEK: if (b_cylinder == (unsigned)fd->track) { fdc->state = SEEKCOMPLETE; break; } #ifdef PC98 pc98_fd_check_ready(fdu); #endif if (fd_cmd(fdc, 3, NE7CMD_SEEK, fd->fdsu, b_cylinder * fd->ft->steptrac, 0)) { /* * seek command not accepted, looks like * the FDC went off to the Saints... */ fdc->retry = 6; /* try a reset */ return(retrier(fdc)); } fd->track = FD_NO_TRACK; fdc->state = SEEKWAIT; return(0); /* will return later */ case SEEKWAIT: /* allow heads to settle */ timeout(fd_pseudointr, fdc, hz / 16); fdc->state = SEEKCOMPLETE; return(0); /* will return later */ case SEEKCOMPLETE : /* SEEK DONE, START DMA */ /* Make sure seek really happened*/ if(fd->track == FD_NO_TRACK) { int descyl = b_cylinder * fd->ft->steptrac; do { /* * This might be a "ready changed" interrupt, * which cannot really happen since the * RDY pin is hardwired to + 5 volts. This * generally indicates a "bouncing" intr * line, so do one of the following: * * When running on an enhanced FDC that is * known to not go stuck after responding * with INVALID, fetch all interrupt states * until seeing either an INVALID or a * real interrupt condition. * * When running on a dumb old NE765, give * up immediately. The controller will * provide up to four dummy RC interrupt * conditions right after reset (for the * corresponding four drives), so this is * our only chance to get notice that it * was not the FDC that caused the interrupt. */ if (fd_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID) return 0; if(fdc->fdct == FDC_NE765 && (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC) return 0; /* hope for a real intr */ } while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC); if (0 == descyl) { int failed = 0; /* * seek to cyl 0 requested; make sure we are * really there */ if (fd_sense_drive_status(fdc, &st3)) failed = 1; #ifdef EPSON_NRDISK if (fdu == nrdu) st3 = NE7_ST3_T0; #endif /* EPSON_NRDISK */ if ((st3 & NE7_ST3_T0) == 0) { printf( "fd%d: Seek to cyl 0, but not really there (ST3 = %b)\n", fdu, st3, NE7_ST3BITS); failed = 1; } if (failed) { if(fdc->retry < 3) fdc->retry = 3; return (retrier(fdc)); } } #ifdef EPSON_NRDISK if (fdu == nrdu) cyl = descyl; #endif if (cyl != descyl) { printf( "fd%d: Seek to cyl %d failed; am at cyl %d (ST0 = 0x%x)\n", fdu, descyl, cyl, st0); if (fdc->retry < 3) fdc->retry = 3; return (retrier(fdc)); } } fd->track = b_cylinder; #ifdef EPSON_NRDISK if (fdu != nrdu) { #endif /* EPSON_NRDISK */ #ifdef FDC_YE if (!(fdc->flags & FDC_PCMCIA)) #endif isa_dmastart(bp->b_flags, bp->b_data+fd->skip, format ? bp->b_bcount : fdblk, fdc->dmachan); sectrac = fd->ft->sectrac; sec = blknum % (sectrac * fd->ft->heads); head = sec / sectrac; sec = sec % sectrac + 1; fd->hddrv = ((head&1)<<2)+fdu; if(format || !read) { /* make sure the drive is writable */ if(fd_sense_drive_status(fdc, &st3) != 0) { /* stuck controller? */ isa_dmadone(bp->b_flags, bp->b_data + fd->skip, format ? bp->b_bcount : fdblk, fdc->dmachan); fdc->retry = 6; /* reset the beast */ return (retrier(fdc)); } if(st3 & NE7_ST3_WP) { /* * XXX YES! this is ugly. * in order to force the current operation * to fail, we will have to fake an FDC * error - all error handling is done * by the retrier() */ fdc->status[0] = NE7_ST0_IC_AT; fdc->status[1] = NE7_ST1_NW; fdc->status[2] = 0; fdc->status[3] = fd->track; fdc->status[4] = head; fdc->status[5] = sec; fdc->retry = 8; /* break out immediately */ fdc->state = IOTIMEDOUT; /* not really... */ return (1); } } if (format) { #ifdef FDC_YE if (fdc->flags & FDC_PCMCIA) (void)fdcpio(fdcu,bp->b_flags, bp->b_data+fd->skip, bp->b_bcount); #endif /* formatting */ if(fd_cmd(fdc, 6, NE7CMD_FORMAT, head << 2 | fdu, finfo->fd_formb_secshift, finfo->fd_formb_nsecs, finfo->fd_formb_gaplen, finfo->fd_formb_fillbyte, 0)) { /* controller fell over */ isa_dmadone(bp->b_flags, bp->b_data + fd->skip, format ? bp->b_bcount : fdblk, fdc->dmachan); fdc->retry = 6; return (retrier(fdc)); } } else { #ifdef FDC_YE if (fdc->flags & FDC_PCMCIA) { /* * this seems to be necessary even when * reading data */ SET_BCDR(1,fdblk,fdc->baseport); /* * perform the write pseudo-DMA before * the WRITE command is sent */ if (!read) (void)fdcpio(fdcu,bp->b_flags, bp->b_data+fd->skip, fdblk); } #endif if (fd_cmd(fdc, 9, (read ? NE7CMD_READ : NE7CMD_WRITE), head << 2 | fdu, /* head & unit */ fd->track, /* track */ head, sec, /* sector + 1 */ fd->ft->secsize, /* sector size */ sectrac, /* sectors/track */ fd->ft->gap, /* gap size */ fd->ft->datalen, /* data length */ 0)) { /* the beast is sleeping again */ isa_dmadone(bp->b_flags, bp->b_data + fd->skip, format ? bp->b_bcount : fdblk, fdc->dmachan); fdc->retry = 6; return (retrier(fdc)); } } #ifdef FDC_YE if (fdc->flags & FDC_PCMCIA) /* * if this is a read, then simply await interrupt * before performing PIO */ if (read && !fdcpio(fdcu,bp->b_flags, bp->b_data+fd->skip,fdblk)) { fd->tohandle = timeout(fd_iotimeout, (caddr_t)fdcu, hz); return(0); /* will return later */ }; /* * write (or format) operation will fall through and * await completion interrupt */ #endif fdc->state = IOCOMPLETE; fd->tohandle = timeout(fd_iotimeout, fdc, hz); return (0); /* will return later */ #ifdef EPSON_NRDISK } else { nrdblkn = (nrd_t)((unsigned long)bp->b_blkno*DEV_BSIZE/fdblk + fd->skip/fdblk); nrd_LED_on(); nrd_addrset(fdblk * nrdblkn); while (!nrd_check_ready()) DELAY(1); if (read) epson_insw(P_NRD_DATA, bp->b_data + fd->skip, fdblk / sizeof(short)); else epson_outsw(P_NRD_DATA, bp->b_data + fd->skip, (format ? bp->b_bcount : fdblk) / sizeof(short)); blknum = (unsigned long)bp->b_blkno*DEV_BSIZE/fdblk + fd->skip/fdblk; sectrac = fd->ft->sectrac; sec = blknum % (sectrac * fd->ft->heads); head = sec / sectrac; sec = sec % sectrac + 1; fd->hddrv = ((head&1)<<2)+fdu; if (nrdsec++ >= nrd_sec()) nrdaddr = (nrd_t)(fd->track * 8 + head * 4); nrdsec = sec; fdc->state = IOCOMPLETE; } #endif #ifdef FDC_YE case PIOREAD: /* * actually perform the PIO read. The IOCOMPLETE case * removes the timeout for us. */ (void)fdcpio(fdcu,bp->b_flags,bp->b_data+fd->skip,fdblk); fdc->state = IOCOMPLETE; /* FALLTHROUGH */ #endif case IOCOMPLETE: /* IO DONE, post-analyze */ #ifdef EPSON_NRDISK if (fdu != nrdu) untimeout(fd_iotimeout, fdc, fd->tohandle); #else untimeout(fd_iotimeout, fdc, fd->tohandle); #endif if (fd_read_status(fdc, fd->fdsu)) { isa_dmadone(bp->b_flags, bp->b_data + fd->skip, format ? bp->b_bcount : fdblk, fdc->dmachan); if (fdc->retry < 6) fdc->retry = 6; /* force a reset */ return (retrier(fdc)); } fdc->state = IOTIMEDOUT; /* FALLTHROUGH */ case IOTIMEDOUT: #ifdef EPSON_NRDISK if (fdu != nrdu) { #endif /* EPSON_NRDISK */ #ifdef FDC_YE if (!(fdc->flags & FDC_PCMCIA)) #endif isa_dmadone(bp->b_flags, bp->b_data + fd->skip, format ? bp->b_bcount : fdblk, fdc->dmachan); #ifdef EPSON_NRDISK } else nrd_LED_off(); #endif /* EPSON_NRDISK */ if (fdc->status[0] & NE7_ST0_IC) { if ((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT && fdc->status[1] & NE7_ST1_OR) { /* * DMA overrun. Someone hogged the bus * and didn't release it in time for the * next FDC transfer. * Just restart it, don't increment retry * count. (vak) */ fdc->state = SEEKCOMPLETE; return (1); } else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_IV && fdc->retry < 6) fdc->retry = 6; /* force a reset */ else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT && fdc->status[2] & NE7_ST2_WC && fdc->retry < 3) fdc->retry = 3; /* force recalibrate */ return (retrier(fdc)); } /* All OK */ fd->skip += fdblk; if (!format && fd->skip < bp->b_bcount - bp->b_resid) { /* set up next transfer */ fdc->state = DOSEEK; } else { /* ALL DONE */ fd->skip = 0; fdc->bp = NULL; /* Tell devstat we have finished with the transaction */ devstat_end_transaction(&fd->device_stats, bp->b_bcount - bp->b_resid, DEVSTAT_TAG_NONE, (bp->b_flags & B_READ) ? DEVSTAT_READ : DEVSTAT_WRITE); biodone(bp); fdc->fd = (fd_p) 0; fdc->fdu = -1; fdc->state = FINDWORK; } return (1); case RESETCTLR: fdc_reset(fdc); fdc->retry++; fdc->state = RESETCOMPLETE; return (0); case RESETCOMPLETE: /* * Discard all the results from the reset so that they * can't cause an unexpected interrupt later. */ for (i = 0; i < 4; i++) (void)fd_sense_int(fdc, &st0, &cyl); fdc->state = STARTRECAL; /* Fall through. */ case STARTRECAL: #ifdef PC98 pc98_fd_check_ready(fdu); #endif if(fd_cmd(fdc, 2, NE7CMD_RECAL, fdu, 0)) { /* arrgl */ fdc->retry = 6; return (retrier(fdc)); } fdc->state = RECALWAIT; return (0); /* will return later */ case RECALWAIT: /* allow heads to settle */ timeout(fd_pseudointr, fdc, hz / 8); fdc->state = RECALCOMPLETE; return (0); /* will return later */ case RECALCOMPLETE: do { /* * See SEEKCOMPLETE for a comment on this: */ if (fd_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID) return 0; if(fdc->fdct == FDC_NE765 && (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC) return 0; /* hope for a real intr */ } while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC); #ifdef EPSON_NRDISK if (fdu == nrdu) { st0 = NE7_ST0_IC_NT; cyl = 0; } #endif if ((st0 & NE7_ST0_IC) != NE7_ST0_IC_NT || cyl != 0) { if(fdc->retry > 3) /* * a recalibrate from beyond cylinder 77 * will "fail" due to the FDC limitations; * since people used to complain much about * the failure message, try not logging * this one if it seems to be the first * time in a line */ printf("fd%d: recal failed ST0 %b cyl %d\n", fdu, st0, NE7_ST0BITS, cyl); if(fdc->retry < 3) fdc->retry = 3; return (retrier(fdc)); } fd->track = 0; /* Seek (probably) necessary */ fdc->state = DOSEEK; return (1); /* will return immediatly */ case MOTORWAIT: if(fd->flags & FD_MOTOR_WAIT) { return (0); /* time's not up yet */ } if (fdc->flags & FDC_NEEDS_RESET) { fdc->state = RESETCTLR; fdc->flags &= ~FDC_NEEDS_RESET; } else { /* * If all motors were off, then the controller was * reset, so it has lost track of the current * cylinder. Recalibrate to handle this case. */ fdc->state = STARTRECAL; } return (1); /* will return immediatly */ default: device_print_prettyname(fdc->fdc_dev); printf("unexpected FD int->"); if (fd_read_status(fdc, fd->fdsu) == 0) printf("FDC status :%x %x %x %x %x %x %x ", fdc->status[0], fdc->status[1], fdc->status[2], fdc->status[3], fdc->status[4], fdc->status[5], fdc->status[6] ); else printf("No status available "); if (fd_sense_int(fdc, &st0, &cyl) != 0) { printf("[controller is dead now]\n"); return (0); } printf("ST0 = %x, PCN = %x\n", st0, cyl); return (0); } /*XXX confusing: some branches return immediately, others end up here*/ return (1); /* Come back immediatly to new state */ } static int retrier(struct fdc_data *fdc) { register struct buf *bp; struct fd_data *fd; int fdu; bp = fdc->bp; /* XXX shouldn't this be cached somewhere? */ fdu = FDUNIT(minor(bp->b_dev)); fd = devclass_get_softc(fd_devclass, fdu); if (fd->options & FDOPT_NORETRY) goto fail; switch (fdc->retry) { case 0: case 1: case 2: fdc->state = SEEKCOMPLETE; break; case 3: case 4: case 5: fdc->state = STARTRECAL; break; case 6: fdc->state = RESETCTLR; break; case 7: break; default: fail: { dev_t sav_b_dev = bp->b_dev; /* Trick diskerr */ bp->b_dev = makedev(major(bp->b_dev), (FDUNIT(minor(bp->b_dev))<<3)|RAW_PART); diskerr(bp, "fd", "hard error", LOG_PRINTF, fdc->fd->skip / DEV_BSIZE, (struct disklabel *)NULL); bp->b_dev = sav_b_dev; if (fdc->flags & FDC_STAT_VALID) { printf( " (ST0 %b ST1 %b ST2 %b cyl %u hd %u sec %u)\n", fdc->status[0], NE7_ST0BITS, fdc->status[1], NE7_ST1BITS, fdc->status[2], NE7_ST2BITS, fdc->status[3], fdc->status[4], fdc->status[5]); } else printf(" (No status)\n"); } bp->b_flags |= B_ERROR; bp->b_error = EIO; bp->b_resid += bp->b_bcount - fdc->fd->skip; fdc->bp = NULL; /* Tell devstat we have finished with the transaction */ devstat_end_transaction(&fdc->fd->device_stats, bp->b_bcount - bp->b_resid, DEVSTAT_TAG_NONE, (bp->b_flags & B_READ) ? DEVSTAT_READ : DEVSTAT_WRITE); fdc->fd->skip = 0; biodone(bp); fdc->state = FINDWORK; fdc->flags |= FDC_NEEDS_RESET; fdc->fd = (fd_p) 0; fdc->fdu = -1; return (1); } fdc->retry++; return (1); } static int fdformat(dev, finfo, p) dev_t dev; struct fd_formb *finfo; struct proc *p; { fdu_t fdu; fd_p fd; struct buf *bp; int rv = 0, s; size_t fdblk; fdu = FDUNIT(minor(dev)); fd = devclass_get_softc(fd_devclass, fdu); fdblk = 128 << fd->ft->secsize; /* set up a buffer header for fdstrategy() */ bp = (struct buf *)malloc(sizeof(struct buf), M_TEMP, M_NOWAIT); if(bp == 0) return ENOBUFS; /* * keep the process from being swapped */ PHOLD(p); bzero((void *)bp, sizeof(struct buf)); bp->b_flags = B_BUSY | B_PHYS | B_FORMAT; bp->b_proc = p; /* * calculate a fake blkno, so fdstrategy() would initiate a * seek to the requested cylinder */ bp->b_blkno = (finfo->cyl * (fd->ft->sectrac * fd->ft->heads) + finfo->head * fd->ft->sectrac) * fdblk / DEV_BSIZE; bp->b_bcount = sizeof(struct fd_idfield_data) * finfo->fd_formb_nsecs; bp->b_data = (caddr_t)finfo; /* now do the format */ bp->b_dev = dev; fdstrategy(bp); /* ...and wait for it to complete */ s = splbio(); while(!(bp->b_flags & B_DONE)) { rv = tsleep((caddr_t)bp, PRIBIO, "fdform", 20 * hz); if (rv == EWOULDBLOCK) break; } splx(s); if (rv == EWOULDBLOCK) { /* timed out */ rv = EIO; biodone(bp); } if (bp->b_flags & B_ERROR) rv = bp->b_error; /* * allow the process to be swapped */ PRELE(p); free(bp, M_TEMP); return rv; } /* * TODO: don't allocate buffer on stack. */ static int fdioctl(dev, cmd, addr, flag, p) dev_t dev; u_long cmd; caddr_t addr; int flag; struct proc *p; { fdu_t fdu = FDUNIT(minor(dev)); fd_p fd = devclass_get_softc(fd_devclass, fdu); size_t fdblk; struct fd_type *fdt; struct disklabel *dl; char buffer[DEV_BSIZE]; int error = 0; fdblk = 128 << fd->ft->secsize; #ifdef PC98 pc98_fd_check_ready(fdu); #endif switch (cmd) { case DIOCGDINFO: bzero(buffer, sizeof (buffer)); dl = (struct disklabel *)buffer; dl->d_secsize = fdblk; fdt = fd->ft; dl->d_secpercyl = fdt->size / fdt->tracks; dl->d_type = DTYPE_FLOPPY; if (readdisklabel(dkmodpart(dev, RAW_PART), fdstrategy, dl) == NULL) error = 0; else error = EINVAL; *(struct disklabel *)addr = *dl; break; case DIOCSDINFO: if ((flag & FWRITE) == 0) error = EBADF; break; case DIOCWLABEL: if ((flag & FWRITE) == 0) error = EBADF; break; case DIOCWDINFO: if ((flag & FWRITE) == 0) { error = EBADF; break; } dl = (struct disklabel *)addr; if ((error = setdisklabel((struct disklabel *)buffer, dl, (u_long)0)) != 0) break; error = writedisklabel(dev, fdstrategy, (struct disklabel *)buffer); break; case FD_FORM: if ((flag & FWRITE) == 0) error = EBADF; /* must be opened for writing */ else if (((struct fd_formb *)addr)->format_version != FD_FORMAT_VERSION) error = EINVAL; /* wrong version of formatting prog */ else error = fdformat(dev, (struct fd_formb *)addr, p); break; case FD_GTYPE: /* get drive type */ *(struct fd_type *)addr = *fd->ft; break; case FD_STYPE: /* set drive type */ /* this is considered harmful; only allow for superuser */ if (suser(p->p_ucred, &p->p_acflag) != 0) return EPERM; *fd->ft = *(struct fd_type *)addr; break; case FD_GOPTS: /* get drive options */ *(int *)addr = fd->options; break; case FD_SOPTS: /* set drive options */ fd->options = *(int *)addr; break; default: error = ENOTTY; break; } return (error); } static device_method_t fdc_methods[] = { /* Device interface */ DEVMETHOD(device_probe, fdc_probe), DEVMETHOD(device_attach, fdc_attach), DEVMETHOD(device_detach, bus_generic_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), /* Bus interface */ DEVMETHOD(bus_print_child, fdc_print_child), /* Our children never use any other bus interface methods. */ { 0, 0 } }; static driver_t fdc_driver = { "fdc", fdc_methods, DRIVER_TYPE_BIO, sizeof(struct fdc_data) }; DRIVER_MODULE(fdc, isa, fdc_driver, fdc_devclass, 0, 0); static device_method_t fd_methods[] = { /* Device interface */ DEVMETHOD(device_probe, fd_probe), DEVMETHOD(device_attach, fd_attach), DEVMETHOD(device_detach, bus_generic_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), /* XXX */ DEVMETHOD(device_resume, bus_generic_resume), /* XXX */ { 0, 0 } }; static driver_t fd_driver = { "fd", fd_methods, DRIVER_TYPE_BIO, sizeof(struct fd_data) }; static struct cdevsw fd_cdevsw = { Fdopen, fdclose, fdread, fdwrite, fdioctl, nostop, nullreset, nodevtotty, seltrue, nommap, fdstrategy, "fd", NULL, -1, nodump, nopsize, D_DISK, 0, -1 }; BDEV_DRIVER_MODULE(fd, fdc, fd_driver, fd_devclass, BDEV_MAJOR, CDEV_MAJOR, fd_cdevsw, 0, 0); #endif /* NFDC > 0 */ /* * Hello emacs, these are the * Local Variables: * c-indent-level: 8 * c-continued-statement-offset: 8 * c-continued-brace-offset: 0 * c-brace-offset: -8 * c-brace-imaginary-offset: 0 * c-argdecl-indent: 8 * c-label-offset: -8 * c++-hanging-braces: 1 * c++-access-specifier-offset: -8 * c++-empty-arglist-indent: 8 * c++-friend-offset: 0 * End: */