/*- * Copyright (c) 2008,2010 Damien Bergamini * ported to FreeBSD by Akinori Furukoshi * USB Consulting, Hans Petter Selasky * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include __FBSDID("$FreeBSD$"); /*- * Ralink Technology RT2700U/RT2800U/RT3000U chipset driver. * http://www.ralinktech.com/ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "usbdevs.h" #define USB_DEBUG_VAR run_debug #include #include #include #define N(_a) ((int)(sizeof((_a)) / sizeof((_a)[0]))) #ifdef USB_DEBUG #define RUN_DEBUG #endif #ifdef RUN_DEBUG int run_debug = 0; static SYSCTL_NODE(_hw_usb, OID_AUTO, run, CTLFLAG_RW, 0, "USB run"); SYSCTL_INT(_hw_usb_run, OID_AUTO, debug, CTLFLAG_RW, &run_debug, 0, "run debug level"); #endif #define IEEE80211_HAS_ADDR4(wh) \ (((wh)->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS) /* * Because of LOR in run_key_delete(), use atomic instead. * '& RUN_CMDQ_MASQ' is to loop cmdq[]. */ #define RUN_CMDQ_GET(c) (atomic_fetchadd_32((c), 1) & RUN_CMDQ_MASQ) static const STRUCT_USB_HOST_ID run_devs[] = { #define RUN_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) } RUN_DEV(ABOCOM, RT2770), RUN_DEV(ABOCOM, RT2870), RUN_DEV(ABOCOM, RT3070), RUN_DEV(ABOCOM, RT3071), RUN_DEV(ABOCOM, RT3072), RUN_DEV(ABOCOM2, RT2870_1), RUN_DEV(ACCTON, RT2770), RUN_DEV(ACCTON, RT2870_1), RUN_DEV(ACCTON, RT2870_2), RUN_DEV(ACCTON, RT2870_3), RUN_DEV(ACCTON, RT2870_4), RUN_DEV(ACCTON, RT2870_5), RUN_DEV(ACCTON, RT3070), RUN_DEV(ACCTON, RT3070_1), RUN_DEV(ACCTON, RT3070_2), RUN_DEV(ACCTON, RT3070_3), RUN_DEV(ACCTON, RT3070_4), RUN_DEV(ACCTON, RT3070_5), RUN_DEV(AIRTIES, RT3070), RUN_DEV(ALLWIN, RT2070), RUN_DEV(ALLWIN, RT2770), RUN_DEV(ALLWIN, RT2870), RUN_DEV(ALLWIN, RT3070), RUN_DEV(ALLWIN, RT3071), RUN_DEV(ALLWIN, RT3072), RUN_DEV(ALLWIN, RT3572), RUN_DEV(AMIGO, RT2870_1), RUN_DEV(AMIGO, RT2870_2), RUN_DEV(AMIT, CGWLUSB2GNR), RUN_DEV(AMIT, RT2870_1), RUN_DEV(AMIT2, RT2870), RUN_DEV(ASUS, RT2870_1), RUN_DEV(ASUS, RT2870_2), RUN_DEV(ASUS, RT2870_3), RUN_DEV(ASUS, RT2870_4), RUN_DEV(ASUS, RT2870_5), RUN_DEV(ASUS, USBN13), RUN_DEV(ASUS, RT3070_1), RUN_DEV(ASUS, USB_N53), RUN_DEV(ASUS2, USBN11), RUN_DEV(AZUREWAVE, RT2870_1), RUN_DEV(AZUREWAVE, RT2870_2), RUN_DEV(AZUREWAVE, RT3070_1), RUN_DEV(AZUREWAVE, RT3070_2), RUN_DEV(AZUREWAVE, RT3070_3), RUN_DEV(BELKIN, F5D8053V3), RUN_DEV(BELKIN, F5D8055), RUN_DEV(BELKIN, F5D8055V2), RUN_DEV(BELKIN, F6D4050V1), RUN_DEV(BELKIN, RT2870_1), RUN_DEV(BELKIN, RT2870_2), RUN_DEV(CISCOLINKSYS, AE1000), RUN_DEV(CISCOLINKSYS2, RT3070), RUN_DEV(CISCOLINKSYS3, RT3070), RUN_DEV(CONCEPTRONIC2, RT2870_1), RUN_DEV(CONCEPTRONIC2, RT2870_2), RUN_DEV(CONCEPTRONIC2, RT2870_3), RUN_DEV(CONCEPTRONIC2, RT2870_4), RUN_DEV(CONCEPTRONIC2, RT2870_5), RUN_DEV(CONCEPTRONIC2, RT2870_6), RUN_DEV(CONCEPTRONIC2, RT2870_7), RUN_DEV(CONCEPTRONIC2, RT2870_8), RUN_DEV(CONCEPTRONIC2, RT3070_1), RUN_DEV(CONCEPTRONIC2, RT3070_2), RUN_DEV(CONCEPTRONIC2, VIGORN61), RUN_DEV(COREGA, CGWLUSB300GNM), RUN_DEV(COREGA, RT2870_1), RUN_DEV(COREGA, RT2870_2), RUN_DEV(COREGA, RT2870_3), RUN_DEV(COREGA, RT3070), RUN_DEV(CYBERTAN, RT2870), RUN_DEV(DLINK, RT2870), RUN_DEV(DLINK, RT3072), RUN_DEV(DLINK2, DWA130), RUN_DEV(DLINK2, RT2870_1), RUN_DEV(DLINK2, RT2870_2), RUN_DEV(DLINK2, RT3070_1), RUN_DEV(DLINK2, RT3070_2), RUN_DEV(DLINK2, RT3070_3), RUN_DEV(DLINK2, RT3070_4), RUN_DEV(DLINK2, RT3070_5), RUN_DEV(DLINK2, RT3072), RUN_DEV(DLINK2, RT3072_1), RUN_DEV(EDIMAX, EW7717), RUN_DEV(EDIMAX, EW7718), RUN_DEV(EDIMAX, RT2870_1), RUN_DEV(ENCORE, RT3070_1), RUN_DEV(ENCORE, RT3070_2), RUN_DEV(ENCORE, RT3070_3), RUN_DEV(GIGABYTE, GNWB31N), RUN_DEV(GIGABYTE, GNWB32L), RUN_DEV(GIGABYTE, RT2870_1), RUN_DEV(GIGASET, RT3070_1), RUN_DEV(GIGASET, RT3070_2), RUN_DEV(GUILLEMOT, HWNU300), RUN_DEV(HAWKING, HWUN2), RUN_DEV(HAWKING, RT2870_1), RUN_DEV(HAWKING, RT2870_2), RUN_DEV(HAWKING, RT3070), RUN_DEV(IODATA, RT3072_1), RUN_DEV(IODATA, RT3072_2), RUN_DEV(IODATA, RT3072_3), RUN_DEV(IODATA, RT3072_4), RUN_DEV(LINKSYS4, RT3070), RUN_DEV(LINKSYS4, WUSB100), RUN_DEV(LINKSYS4, WUSB54GCV3), RUN_DEV(LINKSYS4, WUSB600N), RUN_DEV(LINKSYS4, WUSB600NV2), RUN_DEV(LOGITEC, RT2870_1), RUN_DEV(LOGITEC, RT2870_2), RUN_DEV(LOGITEC, RT2870_3), RUN_DEV(LOGITEC, LANW300NU2), RUN_DEV(LOGITEC, LANW150NU2), RUN_DEV(MELCO, RT2870_1), RUN_DEV(MELCO, RT2870_2), RUN_DEV(MELCO, WLIUCAG300N), RUN_DEV(MELCO, WLIUCG300N), RUN_DEV(MELCO, WLIUCG301N), RUN_DEV(MELCO, WLIUCGN), RUN_DEV(MELCO, WLIUCGNM), RUN_DEV(MELCO, WLIUCGNM2), RUN_DEV(MOTOROLA4, RT2770), RUN_DEV(MOTOROLA4, RT3070), RUN_DEV(MSI, RT3070_1), RUN_DEV(MSI, RT3070_2), RUN_DEV(MSI, RT3070_3), RUN_DEV(MSI, RT3070_4), RUN_DEV(MSI, RT3070_5), RUN_DEV(MSI, RT3070_6), RUN_DEV(MSI, RT3070_7), RUN_DEV(MSI, RT3070_8), RUN_DEV(MSI, RT3070_9), RUN_DEV(MSI, RT3070_10), RUN_DEV(MSI, RT3070_11), RUN_DEV(OVISLINK, RT3072), RUN_DEV(PARA, RT3070), RUN_DEV(PEGATRON, RT2870), RUN_DEV(PEGATRON, RT3070), RUN_DEV(PEGATRON, RT3070_2), RUN_DEV(PEGATRON, RT3070_3), RUN_DEV(PHILIPS, RT2870), RUN_DEV(PLANEX2, GWUS300MINIS), RUN_DEV(PLANEX2, GWUSMICRON), RUN_DEV(PLANEX2, RT2870), RUN_DEV(PLANEX2, RT3070), RUN_DEV(QCOM, RT2870), RUN_DEV(QUANTA, RT3070), RUN_DEV(RALINK, RT2070), RUN_DEV(RALINK, RT2770), RUN_DEV(RALINK, RT2870), RUN_DEV(RALINK, RT3070), RUN_DEV(RALINK, RT3071), RUN_DEV(RALINK, RT3072), RUN_DEV(RALINK, RT3370), RUN_DEV(RALINK, RT3572), RUN_DEV(RALINK, RT8070), RUN_DEV(SAMSUNG, WIS09ABGN), RUN_DEV(SAMSUNG2, RT2870_1), RUN_DEV(SENAO, RT2870_1), RUN_DEV(SENAO, RT2870_2), RUN_DEV(SENAO, RT2870_3), RUN_DEV(SENAO, RT2870_4), RUN_DEV(SENAO, RT3070), RUN_DEV(SENAO, RT3071), RUN_DEV(SENAO, RT3072_1), RUN_DEV(SENAO, RT3072_2), RUN_DEV(SENAO, RT3072_3), RUN_DEV(SENAO, RT3072_4), RUN_DEV(SENAO, RT3072_5), RUN_DEV(SITECOMEU, RT2770), RUN_DEV(SITECOMEU, RT2870_1), RUN_DEV(SITECOMEU, RT2870_2), RUN_DEV(SITECOMEU, RT2870_3), RUN_DEV(SITECOMEU, RT2870_4), RUN_DEV(SITECOMEU, RT3070), RUN_DEV(SITECOMEU, RT3070_2), RUN_DEV(SITECOMEU, RT3070_3), RUN_DEV(SITECOMEU, RT3070_4), RUN_DEV(SITECOMEU, RT3071), RUN_DEV(SITECOMEU, RT3072_1), RUN_DEV(SITECOMEU, RT3072_2), RUN_DEV(SITECOMEU, RT3072_3), RUN_DEV(SITECOMEU, RT3072_4), RUN_DEV(SITECOMEU, RT3072_5), RUN_DEV(SITECOMEU, RT3072_6), RUN_DEV(SITECOMEU, WL608), RUN_DEV(SPARKLAN, RT2870_1), RUN_DEV(SPARKLAN, RT3070), RUN_DEV(SWEEX2, LW153), RUN_DEV(SWEEX2, LW303), RUN_DEV(SWEEX2, LW313), RUN_DEV(TOSHIBA, RT3070), RUN_DEV(UMEDIA, RT2870_1), RUN_DEV(ZCOM, RT2870_1), RUN_DEV(ZCOM, RT2870_2), RUN_DEV(ZINWELL, RT2870_1), RUN_DEV(ZINWELL, RT2870_2), RUN_DEV(ZINWELL, RT3070), RUN_DEV(ZINWELL, RT3072_1), RUN_DEV(ZINWELL, RT3072_2), RUN_DEV(ZYXEL, RT2870_1), RUN_DEV(ZYXEL, RT2870_2), #undef RUN_DEV }; static device_probe_t run_match; static device_attach_t run_attach; static device_detach_t run_detach; static usb_callback_t run_bulk_rx_callback; static usb_callback_t run_bulk_tx_callback0; static usb_callback_t run_bulk_tx_callback1; static usb_callback_t run_bulk_tx_callback2; static usb_callback_t run_bulk_tx_callback3; static usb_callback_t run_bulk_tx_callback4; static usb_callback_t run_bulk_tx_callback5; static void run_bulk_tx_callbackN(struct usb_xfer *xfer, usb_error_t error, unsigned int index); static struct ieee80211vap *run_vap_create(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); static void run_vap_delete(struct ieee80211vap *); static void run_cmdq_cb(void *, int); static void run_setup_tx_list(struct run_softc *, struct run_endpoint_queue *); static void run_unsetup_tx_list(struct run_softc *, struct run_endpoint_queue *); static int run_load_microcode(struct run_softc *); static int run_reset(struct run_softc *); static usb_error_t run_do_request(struct run_softc *, struct usb_device_request *, void *); static int run_read(struct run_softc *, uint16_t, uint32_t *); static int run_read_region_1(struct run_softc *, uint16_t, uint8_t *, int); static int run_write_2(struct run_softc *, uint16_t, uint16_t); static int run_write(struct run_softc *, uint16_t, uint32_t); static int run_write_region_1(struct run_softc *, uint16_t, const uint8_t *, int); static int run_set_region_4(struct run_softc *, uint16_t, uint32_t, int); static int run_efuse_read_2(struct run_softc *, uint16_t, uint16_t *); static int run_eeprom_read_2(struct run_softc *, uint16_t, uint16_t *); static int run_rt2870_rf_write(struct run_softc *, uint8_t, uint32_t); static int run_rt3070_rf_read(struct run_softc *, uint8_t, uint8_t *); static int run_rt3070_rf_write(struct run_softc *, uint8_t, uint8_t); static int run_bbp_read(struct run_softc *, uint8_t, uint8_t *); static int run_bbp_write(struct run_softc *, uint8_t, uint8_t); static int run_mcu_cmd(struct run_softc *, uint8_t, uint16_t); static const char *run_get_rf(int); static int run_read_eeprom(struct run_softc *); static struct ieee80211_node *run_node_alloc(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN]); static int run_media_change(struct ifnet *); static int run_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int run_wme_update(struct ieee80211com *); static void run_wme_update_cb(void *); static void run_key_update_begin(struct ieee80211vap *); static void run_key_update_end(struct ieee80211vap *); static void run_key_set_cb(void *); static int run_key_set(struct ieee80211vap *, struct ieee80211_key *, const uint8_t mac[IEEE80211_ADDR_LEN]); static void run_key_delete_cb(void *); static int run_key_delete(struct ieee80211vap *, struct ieee80211_key *); static void run_ratectl_to(void *); static void run_ratectl_cb(void *, int); static void run_drain_fifo(void *); static void run_iter_func(void *, struct ieee80211_node *); static void run_newassoc_cb(void *); static void run_newassoc(struct ieee80211_node *, int); static void run_rx_frame(struct run_softc *, struct mbuf *, uint32_t); static void run_tx_free(struct run_endpoint_queue *pq, struct run_tx_data *, int); static void run_set_tx_desc(struct run_softc *, struct run_tx_data *); static int run_tx(struct run_softc *, struct mbuf *, struct ieee80211_node *); static int run_tx_mgt(struct run_softc *, struct mbuf *, struct ieee80211_node *); static int run_sendprot(struct run_softc *, const struct mbuf *, struct ieee80211_node *, int, int); static int run_tx_param(struct run_softc *, struct mbuf *, struct ieee80211_node *, const struct ieee80211_bpf_params *); static int run_raw_xmit(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); static void run_start(struct ifnet *); static int run_ioctl(struct ifnet *, u_long, caddr_t); static void run_set_agc(struct run_softc *, uint8_t); static void run_select_chan_group(struct run_softc *, int); static void run_set_rx_antenna(struct run_softc *, int); static void run_rt2870_set_chan(struct run_softc *, u_int); static void run_rt3070_set_chan(struct run_softc *, u_int); static void run_rt3572_set_chan(struct run_softc *, u_int); static int run_set_chan(struct run_softc *, struct ieee80211_channel *); static void run_set_channel(struct ieee80211com *); static void run_scan_start(struct ieee80211com *); static void run_scan_end(struct ieee80211com *); static void run_update_beacon(struct ieee80211vap *, int); static void run_update_beacon_cb(void *); static void run_updateprot(struct ieee80211com *); static void run_updateprot_cb(void *); static void run_usb_timeout_cb(void *); static void run_reset_livelock(struct run_softc *); static void run_enable_tsf_sync(struct run_softc *); static void run_enable_mrr(struct run_softc *); static void run_set_txpreamble(struct run_softc *); static void run_set_basicrates(struct run_softc *); static void run_set_leds(struct run_softc *, uint16_t); static void run_set_bssid(struct run_softc *, const uint8_t *); static void run_set_macaddr(struct run_softc *, const uint8_t *); static void run_updateslot(struct ifnet *); static void run_updateslot_cb(void *); static void run_update_mcast(struct ifnet *); static int8_t run_rssi2dbm(struct run_softc *, uint8_t, uint8_t); static void run_update_promisc_locked(struct ifnet *); static void run_update_promisc(struct ifnet *); static int run_bbp_init(struct run_softc *); static int run_rt3070_rf_init(struct run_softc *); static int run_rt3070_filter_calib(struct run_softc *, uint8_t, uint8_t, uint8_t *); static void run_rt3070_rf_setup(struct run_softc *); static int run_txrx_enable(struct run_softc *); static void run_init(void *); static void run_init_locked(struct run_softc *); static void run_stop(void *); static void run_delay(struct run_softc *, unsigned int); static const struct { uint16_t reg; uint32_t val; } rt2870_def_mac[] = { RT2870_DEF_MAC }; static const struct { uint8_t reg; uint8_t val; } rt2860_def_bbp[] = { RT2860_DEF_BBP }; static const struct rfprog { uint8_t chan; uint32_t r1, r2, r3, r4; } rt2860_rf2850[] = { RT2860_RF2850 }; struct { uint8_t n, r, k; } rt3070_freqs[] = { RT3070_RF3052 }; static const struct { uint8_t reg; uint8_t val; } rt3070_def_rf[] = { RT3070_DEF_RF },rt3572_def_rf[] = { RT3572_DEF_RF }; static const struct usb_config run_config[RUN_N_XFER] = { [RUN_BULK_TX_BE] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .ep_index = 0, .direction = UE_DIR_OUT, .bufsize = RUN_MAX_TXSZ, .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = run_bulk_tx_callback0, .timeout = 5000, /* ms */ }, [RUN_BULK_TX_BK] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .ep_index = 1, .bufsize = RUN_MAX_TXSZ, .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = run_bulk_tx_callback1, .timeout = 5000, /* ms */ }, [RUN_BULK_TX_VI] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .ep_index = 2, .bufsize = RUN_MAX_TXSZ, .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = run_bulk_tx_callback2, .timeout = 5000, /* ms */ }, [RUN_BULK_TX_VO] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .ep_index = 3, .bufsize = RUN_MAX_TXSZ, .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = run_bulk_tx_callback3, .timeout = 5000, /* ms */ }, [RUN_BULK_TX_HCCA] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .ep_index = 4, .bufsize = RUN_MAX_TXSZ, .flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,}, .callback = run_bulk_tx_callback4, .timeout = 5000, /* ms */ }, [RUN_BULK_TX_PRIO] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .ep_index = 5, .bufsize = RUN_MAX_TXSZ, .flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,}, .callback = run_bulk_tx_callback5, .timeout = 5000, /* ms */ }, [RUN_BULK_RX] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .bufsize = RUN_MAX_RXSZ, .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, .callback = run_bulk_rx_callback, } }; static int run_match(device_t self) { struct usb_attach_arg *uaa = device_get_ivars(self); if (uaa->usb_mode != USB_MODE_HOST) return (ENXIO); if (uaa->info.bConfigIndex != 0) return (ENXIO); if (uaa->info.bIfaceIndex != RT2860_IFACE_INDEX) return (ENXIO); return (usbd_lookup_id_by_uaa(run_devs, sizeof(run_devs), uaa)); } static int run_attach(device_t self) { struct run_softc *sc = device_get_softc(self); struct usb_attach_arg *uaa = device_get_ivars(self); struct ieee80211com *ic; struct ifnet *ifp; uint32_t ver; int i, ntries, error; uint8_t iface_index, bands; device_set_usb_desc(self); sc->sc_udev = uaa->device; sc->sc_dev = self; mtx_init(&sc->sc_mtx, device_get_nameunit(sc->sc_dev), MTX_NETWORK_LOCK, MTX_DEF); iface_index = RT2860_IFACE_INDEX; error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer, run_config, RUN_N_XFER, sc, &sc->sc_mtx); if (error) { device_printf(self, "could not allocate USB transfers, " "err=%s\n", usbd_errstr(error)); goto detach; } RUN_LOCK(sc); /* wait for the chip to settle */ for (ntries = 0; ntries < 100; ntries++) { if (run_read(sc, RT2860_ASIC_VER_ID, &ver) != 0) { RUN_UNLOCK(sc); goto detach; } if (ver != 0 && ver != 0xffffffff) break; run_delay(sc, 10); } if (ntries == 100) { device_printf(sc->sc_dev, "timeout waiting for NIC to initialize\n"); RUN_UNLOCK(sc); goto detach; } sc->mac_ver = ver >> 16; sc->mac_rev = ver & 0xffff; /* retrieve RF rev. no and various other things from EEPROM */ run_read_eeprom(sc); device_printf(sc->sc_dev, "MAC/BBP RT%04X (rev 0x%04X), RF %s (MIMO %dT%dR), address %s\n", sc->mac_ver, sc->mac_rev, run_get_rf(sc->rf_rev), sc->ntxchains, sc->nrxchains, ether_sprintf(sc->sc_bssid)); RUN_UNLOCK(sc); ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); if (ifp == NULL) { device_printf(sc->sc_dev, "can not if_alloc()\n"); goto detach; } ic = ifp->if_l2com; ifp->if_softc = sc; if_initname(ifp, "run", device_get_unit(sc->sc_dev)); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_init = run_init; ifp->if_ioctl = run_ioctl; ifp->if_start = run_start; IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); ifp->if_snd.ifq_drv_maxlen = ifqmaxlen; IFQ_SET_READY(&ifp->if_snd); ic->ic_ifp = ifp; ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ /* set device capabilities */ ic->ic_caps = IEEE80211_C_STA | /* station mode supported */ IEEE80211_C_MONITOR | /* monitor mode supported */ IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | IEEE80211_C_WDS | /* 4-address traffic works */ IEEE80211_C_MBSS | IEEE80211_C_SHPREAMBLE | /* short preamble supported */ IEEE80211_C_SHSLOT | /* short slot time supported */ IEEE80211_C_WME | /* WME */ IEEE80211_C_WPA; /* WPA1|WPA2(RSN) */ ic->ic_cryptocaps = IEEE80211_CRYPTO_WEP | IEEE80211_CRYPTO_AES_CCM | IEEE80211_CRYPTO_TKIPMIC | IEEE80211_CRYPTO_TKIP; ic->ic_flags |= IEEE80211_F_DATAPAD; ic->ic_flags_ext |= IEEE80211_FEXT_SWBMISS; bands = 0; setbit(&bands, IEEE80211_MODE_11B); setbit(&bands, IEEE80211_MODE_11G); ieee80211_init_channels(ic, NULL, &bands); /* * Do this by own because h/w supports * more channels than ieee80211_init_channels() */ if (sc->rf_rev == RT2860_RF_2750 || sc->rf_rev == RT2860_RF_2850 || sc->rf_rev == RT3070_RF_3052) { /* set supported .11a rates */ for (i = 14; i < N(rt2860_rf2850); i++) { uint8_t chan = rt2860_rf2850[i].chan; ic->ic_channels[ic->ic_nchans].ic_freq = ieee80211_ieee2mhz(chan, IEEE80211_CHAN_A); ic->ic_channels[ic->ic_nchans].ic_ieee = chan; ic->ic_channels[ic->ic_nchans].ic_flags = IEEE80211_CHAN_A; ic->ic_channels[ic->ic_nchans].ic_extieee = 0; ic->ic_nchans++; } } ieee80211_ifattach(ic, sc->sc_bssid); ic->ic_scan_start = run_scan_start; ic->ic_scan_end = run_scan_end; ic->ic_set_channel = run_set_channel; ic->ic_node_alloc = run_node_alloc; ic->ic_newassoc = run_newassoc; ic->ic_updateslot = run_updateslot; ic->ic_update_mcast = run_update_mcast; ic->ic_wme.wme_update = run_wme_update; ic->ic_raw_xmit = run_raw_xmit; ic->ic_update_promisc = run_update_promisc; ic->ic_vap_create = run_vap_create; ic->ic_vap_delete = run_vap_delete; ieee80211_radiotap_attach(ic, &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), RUN_TX_RADIOTAP_PRESENT, &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), RUN_RX_RADIOTAP_PRESENT); TASK_INIT(&sc->cmdq_task, 0, run_cmdq_cb, sc); TASK_INIT(&sc->ratectl_task, 0, run_ratectl_cb, sc); callout_init((struct callout *)&sc->ratectl_ch, 1); if (bootverbose) ieee80211_announce(ic); return (0); detach: run_detach(self); return (ENXIO); } static int run_detach(device_t self) { struct run_softc *sc = device_get_softc(self); struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic; int i; /* stop all USB transfers */ usbd_transfer_unsetup(sc->sc_xfer, RUN_N_XFER); RUN_LOCK(sc); sc->ratectl_run = RUN_RATECTL_OFF; sc->cmdq_run = sc->cmdq_key_set = RUN_CMDQ_ABORT; /* free TX list, if any */ for (i = 0; i != RUN_EP_QUEUES; i++) run_unsetup_tx_list(sc, &sc->sc_epq[i]); RUN_UNLOCK(sc); if (ifp) { ic = ifp->if_l2com; /* drain tasks */ usb_callout_drain(&sc->ratectl_ch); ieee80211_draintask(ic, &sc->cmdq_task); ieee80211_draintask(ic, &sc->ratectl_task); ieee80211_ifdetach(ic); if_free(ifp); } mtx_destroy(&sc->sc_mtx); return (0); } static struct ieee80211vap * run_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t mac[IEEE80211_ADDR_LEN]) { struct ifnet *ifp = ic->ic_ifp; struct run_softc *sc = ifp->if_softc; struct run_vap *rvp; struct ieee80211vap *vap; int i; if (sc->rvp_cnt >= RUN_VAP_MAX) { if_printf(ifp, "number of VAPs maxed out\n"); return (NULL); } switch (opmode) { case IEEE80211_M_STA: /* enable s/w bmiss handling for sta mode */ flags |= IEEE80211_CLONE_NOBEACONS; /* fall though */ case IEEE80211_M_IBSS: case IEEE80211_M_MONITOR: case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: /* other than WDS vaps, only one at a time */ if (!TAILQ_EMPTY(&ic->ic_vaps)) return (NULL); break; case IEEE80211_M_WDS: TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next){ if(vap->iv_opmode != IEEE80211_M_HOSTAP) continue; /* WDS vap's always share the local mac address. */ flags &= ~IEEE80211_CLONE_BSSID; break; } if (vap == NULL) { if_printf(ifp, "wds only supported in ap mode\n"); return (NULL); } break; default: if_printf(ifp, "unknown opmode %d\n", opmode); return (NULL); } rvp = (struct run_vap *) malloc(sizeof(struct run_vap), M_80211_VAP, M_NOWAIT | M_ZERO); if (rvp == NULL) return (NULL); vap = &rvp->vap; ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac); vap->iv_key_update_begin = run_key_update_begin; vap->iv_key_update_end = run_key_update_end; vap->iv_update_beacon = run_update_beacon; vap->iv_max_aid = RT2870_WCID_MAX; /* * To delete the right key from h/w, we need wcid. * Luckily, there is unused space in ieee80211_key{}, wk_pad, * and matching wcid will be written into there. So, cast * some spells to remove 'const' from ieee80211_key{} */ vap->iv_key_delete = (void *)run_key_delete; vap->iv_key_set = (void *)run_key_set; /* override state transition machine */ rvp->newstate = vap->iv_newstate; vap->iv_newstate = run_newstate; ieee80211_ratectl_init(vap); ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */); /* complete setup */ ieee80211_vap_attach(vap, run_media_change, ieee80211_media_status); /* make sure id is always unique */ for (i = 0; i < RUN_VAP_MAX; i++) { if((sc->rvp_bmap & 1 << i) == 0){ sc->rvp_bmap |= 1 << i; rvp->rvp_id = i; break; } } if (sc->rvp_cnt++ == 0) ic->ic_opmode = opmode; if (opmode == IEEE80211_M_HOSTAP) sc->cmdq_run = RUN_CMDQ_GO; DPRINTF("rvp_id=%d bmap=%x rvp_cnt=%d\n", rvp->rvp_id, sc->rvp_bmap, sc->rvp_cnt); return (vap); } static void run_vap_delete(struct ieee80211vap *vap) { struct run_vap *rvp = RUN_VAP(vap); struct ifnet *ifp; struct ieee80211com *ic; struct run_softc *sc; uint8_t rvp_id; if (vap == NULL) return; ic = vap->iv_ic; ifp = ic->ic_ifp; sc = ifp->if_softc; RUN_LOCK(sc); m_freem(rvp->beacon_mbuf); rvp->beacon_mbuf = NULL; rvp_id = rvp->rvp_id; sc->ratectl_run &= ~(1 << rvp_id); sc->rvp_bmap &= ~(1 << rvp_id); run_set_region_4(sc, RT2860_SKEY(rvp_id, 0), 0, 128); run_set_region_4(sc, RT2860_BCN_BASE(rvp_id), 0, 512); --sc->rvp_cnt; DPRINTF("vap=%p rvp_id=%d bmap=%x rvp_cnt=%d\n", vap, rvp_id, sc->rvp_bmap, sc->rvp_cnt); RUN_UNLOCK(sc); ieee80211_ratectl_deinit(vap); ieee80211_vap_detach(vap); free(rvp, M_80211_VAP); } /* * There are numbers of functions need to be called in context thread. * Rather than creating taskqueue event for each of those functions, * here is all-for-one taskqueue callback function. This function * gurantees deferred functions are executed in the same order they * were enqueued. * '& RUN_CMDQ_MASQ' is to loop cmdq[]. */ static void run_cmdq_cb(void *arg, int pending) { struct run_softc *sc = arg; uint8_t i; /* call cmdq[].func locked */ RUN_LOCK(sc); for (i = sc->cmdq_exec; sc->cmdq[i].func && pending; i = sc->cmdq_exec, pending--) { DPRINTFN(6, "cmdq_exec=%d pending=%d\n", i, pending); if (sc->cmdq_run == RUN_CMDQ_GO) { /* * If arg0 is NULL, callback func needs more * than one arg. So, pass ptr to cmdq struct. */ if (sc->cmdq[i].arg0) sc->cmdq[i].func(sc->cmdq[i].arg0); else sc->cmdq[i].func(&sc->cmdq[i]); } sc->cmdq[i].arg0 = NULL; sc->cmdq[i].func = NULL; sc->cmdq_exec++; sc->cmdq_exec &= RUN_CMDQ_MASQ; } RUN_UNLOCK(sc); } static void run_setup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq) { struct run_tx_data *data; memset(pq, 0, sizeof(*pq)); STAILQ_INIT(&pq->tx_qh); STAILQ_INIT(&pq->tx_fh); for (data = &pq->tx_data[0]; data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) { data->sc = sc; STAILQ_INSERT_TAIL(&pq->tx_fh, data, next); } pq->tx_nfree = RUN_TX_RING_COUNT; } static void run_unsetup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq) { struct run_tx_data *data; /* make sure any subsequent use of the queues will fail */ pq->tx_nfree = 0; STAILQ_INIT(&pq->tx_fh); STAILQ_INIT(&pq->tx_qh); /* free up all node references and mbufs */ for (data = &pq->tx_data[0]; data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) { if (data->m != NULL) { m_freem(data->m); data->m = NULL; } if (data->ni != NULL) { ieee80211_free_node(data->ni); data->ni = NULL; } } } static int run_load_microcode(struct run_softc *sc) { usb_device_request_t req; const struct firmware *fw; const u_char *base; uint32_t tmp; int ntries, error; const uint64_t *temp; uint64_t bytes; RUN_UNLOCK(sc); fw = firmware_get("runfw"); RUN_LOCK(sc); if (fw == NULL) { device_printf(sc->sc_dev, "failed loadfirmware of file %s\n", "runfw"); return ENOENT; } if (fw->datasize != 8192) { device_printf(sc->sc_dev, "invalid firmware size (should be 8KB)\n"); error = EINVAL; goto fail; } /* * RT3071/RT3072 use a different firmware * run-rt2870 (8KB) contains both, * first half (4KB) is for rt2870, * last half is for rt3071. */ base = fw->data; if ((sc->mac_ver) != 0x2860 && (sc->mac_ver) != 0x2872 && (sc->mac_ver) != 0x3070) { base += 4096; } /* cheap sanity check */ temp = fw->data; bytes = *temp; if (bytes != be64toh(0xffffff0210280210)) { device_printf(sc->sc_dev, "firmware checksum failed\n"); error = EINVAL; goto fail; } run_read(sc, RT2860_ASIC_VER_ID, &tmp); /* write microcode image */ run_write_region_1(sc, RT2870_FW_BASE, base, 4096); run_write(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff); run_write(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff); req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = RT2870_RESET; USETW(req.wValue, 8); USETW(req.wIndex, 0); USETW(req.wLength, 0); if ((error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL)) != 0) { device_printf(sc->sc_dev, "firmware reset failed\n"); goto fail; } run_delay(sc, 10); run_write(sc, RT2860_H2M_MAILBOX, 0); if ((error = run_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0)) != 0) goto fail; /* wait until microcontroller is ready */ for (ntries = 0; ntries < 1000; ntries++) { if ((error = run_read(sc, RT2860_SYS_CTRL, &tmp)) != 0) { goto fail; } if (tmp & RT2860_MCU_READY) break; run_delay(sc, 10); } if (ntries == 1000) { device_printf(sc->sc_dev, "timeout waiting for MCU to initialize\n"); error = ETIMEDOUT; goto fail; } device_printf(sc->sc_dev, "firmware %s ver. %u.%u loaded\n", (base == fw->data) ? "RT2870" : "RT3071", *(base + 4092), *(base + 4093)); fail: firmware_put(fw, FIRMWARE_UNLOAD); return (error); } int run_reset(struct run_softc *sc) { usb_device_request_t req; req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = RT2870_RESET; USETW(req.wValue, 1); USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL)); } static usb_error_t run_do_request(struct run_softc *sc, struct usb_device_request *req, void *data) { usb_error_t err; int ntries = 10; RUN_LOCK_ASSERT(sc, MA_OWNED); while (ntries--) { err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx, req, data, 0, NULL, 250 /* ms */); if (err == 0) break; DPRINTFN(1, "Control request failed, %s (retrying)\n", usbd_errstr(err)); run_delay(sc, 10); } return (err); } static int run_read(struct run_softc *sc, uint16_t reg, uint32_t *val) { uint32_t tmp; int error; error = run_read_region_1(sc, reg, (uint8_t *)&tmp, sizeof tmp); if (error == 0) *val = le32toh(tmp); else *val = 0xffffffff; return (error); } static int run_read_region_1(struct run_softc *sc, uint16_t reg, uint8_t *buf, int len) { usb_device_request_t req; req.bmRequestType = UT_READ_VENDOR_DEVICE; req.bRequest = RT2870_READ_REGION_1; USETW(req.wValue, 0); USETW(req.wIndex, reg); USETW(req.wLength, len); return (run_do_request(sc, &req, buf)); } static int run_write_2(struct run_softc *sc, uint16_t reg, uint16_t val) { usb_device_request_t req; req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = RT2870_WRITE_2; USETW(req.wValue, val); USETW(req.wIndex, reg); USETW(req.wLength, 0); return (run_do_request(sc, &req, NULL)); } static int run_write(struct run_softc *sc, uint16_t reg, uint32_t val) { int error; if ((error = run_write_2(sc, reg, val & 0xffff)) == 0) error = run_write_2(sc, reg + 2, val >> 16); return (error); } static int run_write_region_1(struct run_softc *sc, uint16_t reg, const uint8_t *buf, int len) { #if 1 int i, error = 0; /* * NB: the WRITE_REGION_1 command is not stable on RT2860. * We thus issue multiple WRITE_2 commands instead. */ KASSERT((len & 1) == 0, ("run_write_region_1: Data too long.\n")); for (i = 0; i < len && error == 0; i += 2) error = run_write_2(sc, reg + i, buf[i] | buf[i + 1] << 8); return (error); #else usb_device_request_t req; req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = RT2870_WRITE_REGION_1; USETW(req.wValue, 0); USETW(req.wIndex, reg); USETW(req.wLength, len); return (run_do_request(sc, &req, buf)); #endif } static int run_set_region_4(struct run_softc *sc, uint16_t reg, uint32_t val, int len) { int i, error = 0; KASSERT((len & 3) == 0, ("run_set_region_4: Invalid data length.\n")); for (i = 0; i < len && error == 0; i += 4) error = run_write(sc, reg + i, val); return (error); } /* Read 16-bit from eFUSE ROM (RT3070 only.) */ static int run_efuse_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val) { uint32_t tmp; uint16_t reg; int error, ntries; if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0) return (error); addr *= 2; /*- * Read one 16-byte block into registers EFUSE_DATA[0-3]: * DATA0: F E D C * DATA1: B A 9 8 * DATA2: 7 6 5 4 * DATA3: 3 2 1 0 */ tmp &= ~(RT3070_EFSROM_MODE_MASK | RT3070_EFSROM_AIN_MASK); tmp |= (addr & ~0xf) << RT3070_EFSROM_AIN_SHIFT | RT3070_EFSROM_KICK; run_write(sc, RT3070_EFUSE_CTRL, tmp); for (ntries = 0; ntries < 100; ntries++) { if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0) return (error); if (!(tmp & RT3070_EFSROM_KICK)) break; run_delay(sc, 2); } if (ntries == 100) return (ETIMEDOUT); if ((tmp & RT3070_EFUSE_AOUT_MASK) == RT3070_EFUSE_AOUT_MASK) { *val = 0xffff; /* address not found */ return (0); } /* determine to which 32-bit register our 16-bit word belongs */ reg = RT3070_EFUSE_DATA3 - (addr & 0xc); if ((error = run_read(sc, reg, &tmp)) != 0) return (error); *val = (addr & 2) ? tmp >> 16 : tmp & 0xffff; return (0); } static int run_eeprom_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val) { usb_device_request_t req; uint16_t tmp; int error; addr *= 2; req.bmRequestType = UT_READ_VENDOR_DEVICE; req.bRequest = RT2870_EEPROM_READ; USETW(req.wValue, 0); USETW(req.wIndex, addr); USETW(req.wLength, sizeof tmp); error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, &tmp); if (error == 0) *val = le16toh(tmp); else *val = 0xffff; return (error); } static __inline int run_srom_read(struct run_softc *sc, uint16_t addr, uint16_t *val) { /* either eFUSE ROM or EEPROM */ return sc->sc_srom_read(sc, addr, val); } static int run_rt2870_rf_write(struct run_softc *sc, uint8_t reg, uint32_t val) { uint32_t tmp; int error, ntries; for (ntries = 0; ntries < 10; ntries++) { if ((error = run_read(sc, RT2860_RF_CSR_CFG0, &tmp)) != 0) return (error); if (!(tmp & RT2860_RF_REG_CTRL)) break; } if (ntries == 10) return (ETIMEDOUT); /* RF registers are 24-bit on the RT2860 */ tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT | (val & 0x3fffff) << 2 | (reg & 3); return (run_write(sc, RT2860_RF_CSR_CFG0, tmp)); } static int run_rt3070_rf_read(struct run_softc *sc, uint8_t reg, uint8_t *val) { uint32_t tmp; int error, ntries; for (ntries = 0; ntries < 100; ntries++) { if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) return (error); if (!(tmp & RT3070_RF_KICK)) break; } if (ntries == 100) return (ETIMEDOUT); tmp = RT3070_RF_KICK | reg << 8; if ((error = run_write(sc, RT3070_RF_CSR_CFG, tmp)) != 0) return (error); for (ntries = 0; ntries < 100; ntries++) { if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) return (error); if (!(tmp & RT3070_RF_KICK)) break; } if (ntries == 100) return (ETIMEDOUT); *val = tmp & 0xff; return (0); } static int run_rt3070_rf_write(struct run_softc *sc, uint8_t reg, uint8_t val) { uint32_t tmp; int error, ntries; for (ntries = 0; ntries < 10; ntries++) { if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) return (error); if (!(tmp & RT3070_RF_KICK)) break; } if (ntries == 10) return (ETIMEDOUT); tmp = RT3070_RF_WRITE | RT3070_RF_KICK | reg << 8 | val; return (run_write(sc, RT3070_RF_CSR_CFG, tmp)); } static int run_bbp_read(struct run_softc *sc, uint8_t reg, uint8_t *val) { uint32_t tmp; int ntries, error; for (ntries = 0; ntries < 10; ntries++) { if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) return (error); if (!(tmp & RT2860_BBP_CSR_KICK)) break; } if (ntries == 10) return (ETIMEDOUT); tmp = RT2860_BBP_CSR_READ | RT2860_BBP_CSR_KICK | reg << 8; if ((error = run_write(sc, RT2860_BBP_CSR_CFG, tmp)) != 0) return (error); for (ntries = 0; ntries < 10; ntries++) { if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) return (error); if (!(tmp & RT2860_BBP_CSR_KICK)) break; } if (ntries == 10) return (ETIMEDOUT); *val = tmp & 0xff; return (0); } static int run_bbp_write(struct run_softc *sc, uint8_t reg, uint8_t val) { uint32_t tmp; int ntries, error; for (ntries = 0; ntries < 10; ntries++) { if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) return (error); if (!(tmp & RT2860_BBP_CSR_KICK)) break; } if (ntries == 10) return (ETIMEDOUT); tmp = RT2860_BBP_CSR_KICK | reg << 8 | val; return (run_write(sc, RT2860_BBP_CSR_CFG, tmp)); } /* * Send a command to the 8051 microcontroller unit. */ static int run_mcu_cmd(struct run_softc *sc, uint8_t cmd, uint16_t arg) { uint32_t tmp; int error, ntries; for (ntries = 0; ntries < 100; ntries++) { if ((error = run_read(sc, RT2860_H2M_MAILBOX, &tmp)) != 0) return error; if (!(tmp & RT2860_H2M_BUSY)) break; } if (ntries == 100) return ETIMEDOUT; tmp = RT2860_H2M_BUSY | RT2860_TOKEN_NO_INTR << 16 | arg; if ((error = run_write(sc, RT2860_H2M_MAILBOX, tmp)) == 0) error = run_write(sc, RT2860_HOST_CMD, cmd); return (error); } /* * Add `delta' (signed) to each 4-bit sub-word of a 32-bit word. * Used to adjust per-rate Tx power registers. */ static __inline uint32_t b4inc(uint32_t b32, int8_t delta) { int8_t i, b4; for (i = 0; i < 8; i++) { b4 = b32 & 0xf; b4 += delta; if (b4 < 0) b4 = 0; else if (b4 > 0xf) b4 = 0xf; b32 = b32 >> 4 | b4 << 28; } return (b32); } static const char * run_get_rf(int rev) { switch (rev) { case RT2860_RF_2820: return "RT2820"; case RT2860_RF_2850: return "RT2850"; case RT2860_RF_2720: return "RT2720"; case RT2860_RF_2750: return "RT2750"; case RT3070_RF_3020: return "RT3020"; case RT3070_RF_2020: return "RT2020"; case RT3070_RF_3021: return "RT3021"; case RT3070_RF_3022: return "RT3022"; case RT3070_RF_3052: return "RT3052"; } return ("unknown"); } int run_read_eeprom(struct run_softc *sc) { int8_t delta_2ghz, delta_5ghz; uint32_t tmp; uint16_t val; int ridx, ant, i; /* check whether the ROM is eFUSE ROM or EEPROM */ sc->sc_srom_read = run_eeprom_read_2; if (sc->mac_ver >= 0x3070) { run_read(sc, RT3070_EFUSE_CTRL, &tmp); DPRINTF("EFUSE_CTRL=0x%08x\n", tmp); if (tmp & RT3070_SEL_EFUSE) sc->sc_srom_read = run_efuse_read_2; } /* read ROM version */ run_srom_read(sc, RT2860_EEPROM_VERSION, &val); DPRINTF("EEPROM rev=%d, FAE=%d\n", val & 0xff, val >> 8); /* read MAC address */ run_srom_read(sc, RT2860_EEPROM_MAC01, &val); sc->sc_bssid[0] = val & 0xff; sc->sc_bssid[1] = val >> 8; run_srom_read(sc, RT2860_EEPROM_MAC23, &val); sc->sc_bssid[2] = val & 0xff; sc->sc_bssid[3] = val >> 8; run_srom_read(sc, RT2860_EEPROM_MAC45, &val); sc->sc_bssid[4] = val & 0xff; sc->sc_bssid[5] = val >> 8; /* read vender BBP settings */ for (i = 0; i < 10; i++) { run_srom_read(sc, RT2860_EEPROM_BBP_BASE + i, &val); sc->bbp[i].val = val & 0xff; sc->bbp[i].reg = val >> 8; DPRINTF("BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val); } if (sc->mac_ver >= 0x3071) { /* read vendor RF settings */ for (i = 0; i < 10; i++) { run_srom_read(sc, RT3071_EEPROM_RF_BASE + i, &val); sc->rf[i].val = val & 0xff; sc->rf[i].reg = val >> 8; DPRINTF("RF%d=0x%02x\n", sc->rf[i].reg, sc->rf[i].val); } } /* read RF frequency offset from EEPROM */ run_srom_read(sc, RT2860_EEPROM_FREQ_LEDS, &val); sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0; DPRINTF("EEPROM freq offset %d\n", sc->freq & 0xff); if (val >> 8 != 0xff) { /* read LEDs operating mode */ sc->leds = val >> 8; run_srom_read(sc, RT2860_EEPROM_LED1, &sc->led[0]); run_srom_read(sc, RT2860_EEPROM_LED2, &sc->led[1]); run_srom_read(sc, RT2860_EEPROM_LED3, &sc->led[2]); } else { /* broken EEPROM, use default settings */ sc->leds = 0x01; sc->led[0] = 0x5555; sc->led[1] = 0x2221; sc->led[2] = 0x5627; /* differs from RT2860 */ } DPRINTF("EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n", sc->leds, sc->led[0], sc->led[1], sc->led[2]); /* read RF information */ run_srom_read(sc, RT2860_EEPROM_ANTENNA, &val); if (val == 0xffff) { DPRINTF("invalid EEPROM antenna info, using default\n"); if (sc->mac_ver == 0x3572) { /* default to RF3052 2T2R */ sc->rf_rev = RT3070_RF_3052; sc->ntxchains = 2; sc->nrxchains = 2; } else if (sc->mac_ver >= 0x3070) { /* default to RF3020 1T1R */ sc->rf_rev = RT3070_RF_3020; sc->ntxchains = 1; sc->nrxchains = 1; } else { /* default to RF2820 1T2R */ sc->rf_rev = RT2860_RF_2820; sc->ntxchains = 1; sc->nrxchains = 2; } } else { sc->rf_rev = (val >> 8) & 0xf; sc->ntxchains = (val >> 4) & 0xf; sc->nrxchains = val & 0xf; } DPRINTF("EEPROM RF rev=0x%02x chains=%dT%dR\n", sc->rf_rev, sc->ntxchains, sc->nrxchains); /* check if RF supports automatic Tx access gain control */ run_srom_read(sc, RT2860_EEPROM_CONFIG, &val); DPRINTF("EEPROM CFG 0x%04x\n", val); /* check if driver should patch the DAC issue */ if ((val >> 8) != 0xff) sc->patch_dac = (val >> 15) & 1; if ((val & 0xff) != 0xff) { sc->ext_5ghz_lna = (val >> 3) & 1; sc->ext_2ghz_lna = (val >> 2) & 1; /* check if RF supports automatic Tx access gain control */ sc->calib_2ghz = sc->calib_5ghz = (val >> 1) & 1; /* check if we have a hardware radio switch */ sc->rfswitch = val & 1; } /* read power settings for 2GHz channels */ for (i = 0; i < 14; i += 2) { run_srom_read(sc, RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2, &val); sc->txpow1[i + 0] = (int8_t)(val & 0xff); sc->txpow1[i + 1] = (int8_t)(val >> 8); run_srom_read(sc, RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2, &val); sc->txpow2[i + 0] = (int8_t)(val & 0xff); sc->txpow2[i + 1] = (int8_t)(val >> 8); } /* fix broken Tx power entries */ for (i = 0; i < 14; i++) { if (sc->txpow1[i] < 0 || sc->txpow1[i] > 31) sc->txpow1[i] = 5; if (sc->txpow2[i] < 0 || sc->txpow2[i] > 31) sc->txpow2[i] = 5; DPRINTF("chan %d: power1=%d, power2=%d\n", rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]); } /* read power settings for 5GHz channels */ for (i = 0; i < 40; i += 2) { run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2, &val); sc->txpow1[i + 14] = (int8_t)(val & 0xff); sc->txpow1[i + 15] = (int8_t)(val >> 8); run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2, &val); sc->txpow2[i + 14] = (int8_t)(val & 0xff); sc->txpow2[i + 15] = (int8_t)(val >> 8); } /* fix broken Tx power entries */ for (i = 0; i < 40; i++) { if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15) sc->txpow1[14 + i] = 5; if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15) sc->txpow2[14 + i] = 5; DPRINTF("chan %d: power1=%d, power2=%d\n", rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i], sc->txpow2[14 + i]); } /* read Tx power compensation for each Tx rate */ run_srom_read(sc, RT2860_EEPROM_DELTAPWR, &val); delta_2ghz = delta_5ghz = 0; if ((val & 0xff) != 0xff && (val & 0x80)) { delta_2ghz = val & 0xf; if (!(val & 0x40)) /* negative number */ delta_2ghz = -delta_2ghz; } val >>= 8; if ((val & 0xff) != 0xff && (val & 0x80)) { delta_5ghz = val & 0xf; if (!(val & 0x40)) /* negative number */ delta_5ghz = -delta_5ghz; } DPRINTF("power compensation=%d (2GHz), %d (5GHz)\n", delta_2ghz, delta_5ghz); for (ridx = 0; ridx < 5; ridx++) { uint32_t reg; run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2, &val); reg = val; run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2 + 1, &val); reg |= (uint32_t)val << 16; sc->txpow20mhz[ridx] = reg; sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz); sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz); DPRINTF("ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, " "40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx], sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]); } /* read RSSI offsets and LNA gains from EEPROM */ run_srom_read(sc, RT2860_EEPROM_RSSI1_2GHZ, &val); sc->rssi_2ghz[0] = val & 0xff; /* Ant A */ sc->rssi_2ghz[1] = val >> 8; /* Ant B */ run_srom_read(sc, RT2860_EEPROM_RSSI2_2GHZ, &val); if (sc->mac_ver >= 0x3070) { /* * On RT3070 chips (limited to 2 Rx chains), this ROM * field contains the Tx mixer gain for the 2GHz band. */ if ((val & 0xff) != 0xff) sc->txmixgain_2ghz = val & 0x7; DPRINTF("tx mixer gain=%u (2GHz)\n", sc->txmixgain_2ghz); } else sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ sc->lna[2] = val >> 8; /* channel group 2 */ run_srom_read(sc, RT2860_EEPROM_RSSI1_5GHZ, &val); sc->rssi_5ghz[0] = val & 0xff; /* Ant A */ sc->rssi_5ghz[1] = val >> 8; /* Ant B */ run_srom_read(sc, RT2860_EEPROM_RSSI2_5GHZ, &val); if (sc->mac_ver == 0x3572) { /* * On RT3572 chips (limited to 2 Rx chains), this ROM * field contains the Tx mixer gain for the 5GHz band. */ if ((val & 0xff) != 0xff) sc->txmixgain_5ghz = val & 0x7; DPRINTF("tx mixer gain=%u (5GHz)\n", sc->txmixgain_5ghz); } else sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ sc->lna[3] = val >> 8; /* channel group 3 */ run_srom_read(sc, RT2860_EEPROM_LNA, &val); sc->lna[0] = val & 0xff; /* channel group 0 */ sc->lna[1] = val >> 8; /* channel group 1 */ /* fix broken 5GHz LNA entries */ if (sc->lna[2] == 0 || sc->lna[2] == 0xff) { DPRINTF("invalid LNA for channel group %d\n", 2); sc->lna[2] = sc->lna[1]; } if (sc->lna[3] == 0 || sc->lna[3] == 0xff) { DPRINTF("invalid LNA for channel group %d\n", 3); sc->lna[3] = sc->lna[1]; } /* fix broken RSSI offset entries */ for (ant = 0; ant < 3; ant++) { if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) { DPRINTF("invalid RSSI%d offset: %d (2GHz)\n", ant + 1, sc->rssi_2ghz[ant]); sc->rssi_2ghz[ant] = 0; } if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) { DPRINTF("invalid RSSI%d offset: %d (5GHz)\n", ant + 1, sc->rssi_5ghz[ant]); sc->rssi_5ghz[ant] = 0; } } return (0); } static struct ieee80211_node * run_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) { return malloc(sizeof (struct run_node), M_DEVBUF, M_NOWAIT | M_ZERO); } static int run_media_change(struct ifnet *ifp) { struct ieee80211vap *vap = ifp->if_softc; struct ieee80211com *ic = vap->iv_ic; const struct ieee80211_txparam *tp; struct run_softc *sc = ic->ic_ifp->if_softc; uint8_t rate, ridx; int error; RUN_LOCK(sc); error = ieee80211_media_change(ifp); if (error != ENETRESET) { RUN_UNLOCK(sc); return (error); } tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { struct ieee80211_node *ni; struct run_node *rn; rate = ic->ic_sup_rates[ic->ic_curmode]. rs_rates[tp->ucastrate] & IEEE80211_RATE_VAL; for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) if (rt2860_rates[ridx].rate == rate) break; ni = ieee80211_ref_node(vap->iv_bss); rn = (struct run_node *)ni; rn->fix_ridx = ridx; DPRINTF("rate=%d, fix_ridx=%d\n", rate, rn->fix_ridx); ieee80211_free_node(ni); } #if 0 if ((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING)){ run_init_locked(sc); } #endif RUN_UNLOCK(sc); return (0); } static int run_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { const struct ieee80211_txparam *tp; struct ieee80211com *ic = vap->iv_ic; struct run_softc *sc = ic->ic_ifp->if_softc; struct run_vap *rvp = RUN_VAP(vap); enum ieee80211_state ostate; uint32_t sta[3]; uint32_t tmp; uint8_t ratectl; uint8_t restart_ratectl = 0; uint8_t bid = 1 << rvp->rvp_id; ostate = vap->iv_state; DPRINTF("%s -> %s\n", ieee80211_state_name[ostate], ieee80211_state_name[nstate]); IEEE80211_UNLOCK(ic); RUN_LOCK(sc); ratectl = sc->ratectl_run; /* remember current state */ sc->ratectl_run = RUN_RATECTL_OFF; usb_callout_stop(&sc->ratectl_ch); if (ostate == IEEE80211_S_RUN) { /* turn link LED off */ run_set_leds(sc, RT2860_LED_RADIO); } switch (nstate) { case IEEE80211_S_INIT: restart_ratectl = 1; if (ostate != IEEE80211_S_RUN) break; ratectl &= ~bid; sc->runbmap &= ~bid; /* abort TSF synchronization if there is no vap running */ if (--sc->running == 0) { run_read(sc, RT2860_BCN_TIME_CFG, &tmp); run_write(sc, RT2860_BCN_TIME_CFG, tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN)); } break; case IEEE80211_S_RUN: if (!(sc->runbmap & bid)) { if(sc->running++) restart_ratectl = 1; sc->runbmap |= bid; } m_freem(rvp->beacon_mbuf); rvp->beacon_mbuf = NULL; switch (vap->iv_opmode) { case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: sc->ap_running |= bid; ic->ic_opmode = vap->iv_opmode; run_update_beacon_cb(vap); break; case IEEE80211_M_IBSS: sc->adhoc_running |= bid; if (!sc->ap_running) ic->ic_opmode = vap->iv_opmode; run_update_beacon_cb(vap); break; case IEEE80211_M_STA: sc->sta_running |= bid; if (!sc->ap_running && !sc->adhoc_running) ic->ic_opmode = vap->iv_opmode; /* read statistic counters (clear on read) */ run_read_region_1(sc, RT2860_TX_STA_CNT0, (uint8_t *)sta, sizeof sta); break; default: ic->ic_opmode = vap->iv_opmode; break; } if (vap->iv_opmode != IEEE80211_M_MONITOR) { struct ieee80211_node *ni; if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) { RUN_UNLOCK(sc); IEEE80211_LOCK(ic); return (-1); } run_updateslot(ic->ic_ifp); run_enable_mrr(sc); run_set_txpreamble(sc); run_set_basicrates(sc); ni = ieee80211_ref_node(vap->iv_bss); IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid); run_set_bssid(sc, ni->ni_bssid); ieee80211_free_node(ni); run_enable_tsf_sync(sc); /* enable automatic rate adaptation */ tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) ratectl |= bid; } /* turn link LED on */ run_set_leds(sc, RT2860_LED_RADIO | (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan) ? RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ)); break; default: DPRINTFN(6, "undefined case\n"); break; } /* restart amrr for running VAPs */ if ((sc->ratectl_run = ratectl) && restart_ratectl) usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); RUN_UNLOCK(sc); IEEE80211_LOCK(ic); return(rvp->newstate(vap, nstate, arg)); } /* ARGSUSED */ static void run_wme_update_cb(void *arg) { struct ieee80211com *ic = arg; struct run_softc *sc = ic->ic_ifp->if_softc; struct ieee80211_wme_state *wmesp = &ic->ic_wme; int aci, error = 0; RUN_LOCK_ASSERT(sc, MA_OWNED); /* update MAC TX configuration registers */ for (aci = 0; aci < WME_NUM_AC; aci++) { error = run_write(sc, RT2860_EDCA_AC_CFG(aci), wmesp->wme_params[aci].wmep_logcwmax << 16 | wmesp->wme_params[aci].wmep_logcwmin << 12 | wmesp->wme_params[aci].wmep_aifsn << 8 | wmesp->wme_params[aci].wmep_txopLimit); if (error) goto err; } /* update SCH/DMA registers too */ error = run_write(sc, RT2860_WMM_AIFSN_CFG, wmesp->wme_params[WME_AC_VO].wmep_aifsn << 12 | wmesp->wme_params[WME_AC_VI].wmep_aifsn << 8 | wmesp->wme_params[WME_AC_BK].wmep_aifsn << 4 | wmesp->wme_params[WME_AC_BE].wmep_aifsn); if (error) goto err; error = run_write(sc, RT2860_WMM_CWMIN_CFG, wmesp->wme_params[WME_AC_VO].wmep_logcwmin << 12 | wmesp->wme_params[WME_AC_VI].wmep_logcwmin << 8 | wmesp->wme_params[WME_AC_BK].wmep_logcwmin << 4 | wmesp->wme_params[WME_AC_BE].wmep_logcwmin); if (error) goto err; error = run_write(sc, RT2860_WMM_CWMAX_CFG, wmesp->wme_params[WME_AC_VO].wmep_logcwmax << 12 | wmesp->wme_params[WME_AC_VI].wmep_logcwmax << 8 | wmesp->wme_params[WME_AC_BK].wmep_logcwmax << 4 | wmesp->wme_params[WME_AC_BE].wmep_logcwmax); if (error) goto err; error = run_write(sc, RT2860_WMM_TXOP0_CFG, wmesp->wme_params[WME_AC_BK].wmep_txopLimit << 16 | wmesp->wme_params[WME_AC_BE].wmep_txopLimit); if (error) goto err; error = run_write(sc, RT2860_WMM_TXOP1_CFG, wmesp->wme_params[WME_AC_VO].wmep_txopLimit << 16 | wmesp->wme_params[WME_AC_VI].wmep_txopLimit); err: if (error) DPRINTF("WME update failed\n"); return; } static int run_wme_update(struct ieee80211com *ic) { struct run_softc *sc = ic->ic_ifp->if_softc; /* sometime called wothout lock */ if (mtx_owned(&ic->ic_comlock.mtx)) { uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", i); sc->cmdq[i].func = run_wme_update_cb; sc->cmdq[i].arg0 = ic; ieee80211_runtask(ic, &sc->cmdq_task); return (0); } RUN_LOCK(sc); run_wme_update_cb(ic); RUN_UNLOCK(sc); /* return whatever, upper layer desn't care anyway */ return (0); } static void run_key_update_begin(struct ieee80211vap *vap) { /* * To avoid out-of-order events, both run_key_set() and * _delete() are deferred and handled by run_cmdq_cb(). * So, there is nothing we need to do here. */ } static void run_key_update_end(struct ieee80211vap *vap) { /* null */ } static void run_key_set_cb(void *arg) { struct run_cmdq *cmdq = arg; struct ieee80211vap *vap = cmdq->arg1; struct ieee80211_key *k = cmdq->k; struct ieee80211com *ic = vap->iv_ic; struct run_softc *sc = ic->ic_ifp->if_softc; struct ieee80211_node *ni; uint32_t attr; uint16_t base, associd; uint8_t mode, wcid, iv[8]; RUN_LOCK_ASSERT(sc, MA_OWNED); if (vap->iv_opmode == IEEE80211_M_HOSTAP) ni = ieee80211_find_vap_node(&ic->ic_sta, vap, cmdq->mac); else ni = vap->iv_bss; associd = (ni != NULL) ? ni->ni_associd : 0; /* map net80211 cipher to RT2860 security mode */ switch (k->wk_cipher->ic_cipher) { case IEEE80211_CIPHER_WEP: if(k->wk_keylen < 8) mode = RT2860_MODE_WEP40; else mode = RT2860_MODE_WEP104; break; case IEEE80211_CIPHER_TKIP: mode = RT2860_MODE_TKIP; break; case IEEE80211_CIPHER_AES_CCM: mode = RT2860_MODE_AES_CCMP; break; default: DPRINTF("undefined case\n"); return; } DPRINTFN(1, "associd=%x, keyix=%d, mode=%x, type=%s, tx=%s, rx=%s\n", associd, k->wk_keyix, mode, (k->wk_flags & IEEE80211_KEY_GROUP) ? "group" : "pairwise", (k->wk_flags & IEEE80211_KEY_XMIT) ? "on" : "off", (k->wk_flags & IEEE80211_KEY_RECV) ? "on" : "off"); if (k->wk_flags & IEEE80211_KEY_GROUP) { wcid = 0; /* NB: update WCID0 for group keys */ base = RT2860_SKEY(RUN_VAP(vap)->rvp_id, k->wk_keyix); } else { wcid = (vap->iv_opmode == IEEE80211_M_STA) ? 1 : RUN_AID2WCID(associd); base = RT2860_PKEY(wcid); } if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) { if(run_write_region_1(sc, base, k->wk_key, 16)) return; if(run_write_region_1(sc, base + 16, &k->wk_key[16], 8)) /* wk_txmic */ return; if(run_write_region_1(sc, base + 24, &k->wk_key[24], 8)) /* wk_rxmic */ return; } else { /* roundup len to 16-bit: XXX fix write_region_1() instead */ if(run_write_region_1(sc, base, k->wk_key, (k->wk_keylen + 1) & ~1)) return; } if (!(k->wk_flags & IEEE80211_KEY_GROUP) || (k->wk_flags & (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV))) { /* set initial packet number in IV+EIV */ if (k->wk_cipher == IEEE80211_CIPHER_WEP) { memset(iv, 0, sizeof iv); iv[3] = vap->iv_def_txkey << 6; } else { if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) { iv[0] = k->wk_keytsc >> 8; iv[1] = (iv[0] | 0x20) & 0x7f; iv[2] = k->wk_keytsc; } else /* CCMP */ { iv[0] = k->wk_keytsc; iv[1] = k->wk_keytsc >> 8; iv[2] = 0; } iv[3] = k->wk_keyix << 6 | IEEE80211_WEP_EXTIV; iv[4] = k->wk_keytsc >> 16; iv[5] = k->wk_keytsc >> 24; iv[6] = k->wk_keytsc >> 32; iv[7] = k->wk_keytsc >> 40; } if (run_write_region_1(sc, RT2860_IVEIV(wcid), iv, 8)) return; } if (k->wk_flags & IEEE80211_KEY_GROUP) { /* install group key */ if (run_read(sc, RT2860_SKEY_MODE_0_7, &attr)) return; attr &= ~(0xf << (k->wk_keyix * 4)); attr |= mode << (k->wk_keyix * 4); if (run_write(sc, RT2860_SKEY_MODE_0_7, attr)) return; } else { /* install pairwise key */ if (run_read(sc, RT2860_WCID_ATTR(wcid), &attr)) return; attr = (attr & ~0xf) | (mode << 1) | RT2860_RX_PKEY_EN; if (run_write(sc, RT2860_WCID_ATTR(wcid), attr)) return; } /* TODO create a pass-thru key entry? */ /* need wcid to delete the right key later */ k->wk_pad = wcid; } /* * Don't have to be deferred, but in order to keep order of * execution, i.e. with run_key_delete(), defer this and let * run_cmdq_cb() maintain the order. * * return 0 on error */ static int run_key_set(struct ieee80211vap *vap, struct ieee80211_key *k, const uint8_t mac[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct run_softc *sc = ic->ic_ifp->if_softc; uint32_t i; i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", i); sc->cmdq[i].func = run_key_set_cb; sc->cmdq[i].arg0 = NULL; sc->cmdq[i].arg1 = vap; sc->cmdq[i].k = k; IEEE80211_ADDR_COPY(sc->cmdq[i].mac, mac); ieee80211_runtask(ic, &sc->cmdq_task); /* * To make sure key will be set when hostapd * calls iv_key_set() before if_init(). */ if (vap->iv_opmode == IEEE80211_M_HOSTAP) { RUN_LOCK(sc); sc->cmdq_key_set = RUN_CMDQ_GO; RUN_UNLOCK(sc); } return (1); } /* * If wlan is destroyed without being brought down i.e. without * wlan down or wpa_cli terminate, this function is called after * vap is gone. Don't refer it. */ static void run_key_delete_cb(void *arg) { struct run_cmdq *cmdq = arg; struct run_softc *sc = cmdq->arg1; struct ieee80211_key *k = &cmdq->key; uint32_t attr; uint8_t wcid; RUN_LOCK_ASSERT(sc, MA_OWNED); if (k->wk_flags & IEEE80211_KEY_GROUP) { /* remove group key */ DPRINTF("removing group key\n"); run_read(sc, RT2860_SKEY_MODE_0_7, &attr); attr &= ~(0xf << (k->wk_keyix * 4)); run_write(sc, RT2860_SKEY_MODE_0_7, attr); } else { /* remove pairwise key */ DPRINTF("removing key for wcid %x\n", k->wk_pad); /* matching wcid was written to wk_pad in run_key_set() */ wcid = k->wk_pad; run_read(sc, RT2860_WCID_ATTR(wcid), &attr); attr &= ~0xf; run_write(sc, RT2860_WCID_ATTR(wcid), attr); run_set_region_4(sc, RT2860_WCID_ENTRY(wcid), 0, 8); } k->wk_pad = 0; } /* * return 0 on error */ static int run_key_delete(struct ieee80211vap *vap, struct ieee80211_key *k) { struct ieee80211com *ic = vap->iv_ic; struct run_softc *sc = ic->ic_ifp->if_softc; struct ieee80211_key *k0; uint32_t i; /* * When called back, key might be gone. So, make a copy * of some values need to delete keys before deferring. * But, because of LOR with node lock, cannot use lock here. * So, use atomic instead. */ i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", i); sc->cmdq[i].func = run_key_delete_cb; sc->cmdq[i].arg0 = NULL; sc->cmdq[i].arg1 = sc; k0 = &sc->cmdq[i].key; k0->wk_flags = k->wk_flags; k0->wk_keyix = k->wk_keyix; /* matching wcid was written to wk_pad in run_key_set() */ k0->wk_pad = k->wk_pad; ieee80211_runtask(ic, &sc->cmdq_task); return (1); /* return fake success */ } static void run_ratectl_to(void *arg) { struct run_softc *sc = arg; /* do it in a process context, so it can go sleep */ ieee80211_runtask(sc->sc_ifp->if_l2com, &sc->ratectl_task); /* next timeout will be rescheduled in the callback task */ } /* ARGSUSED */ static void run_ratectl_cb(void *arg, int pending) { struct run_softc *sc = arg; struct ieee80211com *ic = sc->sc_ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); if (vap == NULL) return; if (sc->rvp_cnt <= 1 && vap->iv_opmode == IEEE80211_M_STA) run_iter_func(sc, vap->iv_bss); else { /* * run_reset_livelock() doesn't do anything with AMRR, * but Ralink wants us to call it every 1 sec. So, we * piggyback here rather than creating another callout. * Livelock may occur only in HOSTAP or IBSS mode * (when h/w is sending beacons). */ RUN_LOCK(sc); run_reset_livelock(sc); /* just in case, there are some stats to drain */ run_drain_fifo(sc); RUN_UNLOCK(sc); ieee80211_iterate_nodes(&ic->ic_sta, run_iter_func, sc); } if(sc->ratectl_run != RUN_RATECTL_OFF) usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); } static void run_drain_fifo(void *arg) { struct run_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; uint32_t stat; uint16_t (*wstat)[3]; uint8_t wcid, mcs, pid; int8_t retry; RUN_LOCK_ASSERT(sc, MA_OWNED); for (;;) { /* drain Tx status FIFO (maxsize = 16) */ run_read(sc, RT2860_TX_STAT_FIFO, &stat); DPRINTFN(4, "tx stat 0x%08x\n", stat); if (!(stat & RT2860_TXQ_VLD)) break; wcid = (stat >> RT2860_TXQ_WCID_SHIFT) & 0xff; /* if no ACK was requested, no feedback is available */ if (!(stat & RT2860_TXQ_ACKREQ) || wcid > RT2870_WCID_MAX || wcid == 0) continue; /* * Even though each stat is Tx-complete-status like format, * the device can poll stats. Because there is no guarantee * that the referring node is still around when read the stats. * So that, if we use ieee80211_ratectl_tx_update(), we will * have hard time not to refer already freed node. * * To eliminate such page faults, we poll stats in softc. * Then, update the rates later with ieee80211_ratectl_tx_update(). */ wstat = &(sc->wcid_stats[wcid]); (*wstat)[RUN_TXCNT]++; if (stat & RT2860_TXQ_OK) (*wstat)[RUN_SUCCESS]++; else ifp->if_oerrors++; /* * Check if there were retries, ie if the Tx success rate is * different from the requested rate. Note that it works only * because we do not allow rate fallback from OFDM to CCK. */ mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f; pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf; if ((retry = pid -1 - mcs) > 0) { (*wstat)[RUN_TXCNT] += retry; (*wstat)[RUN_RETRY] += retry; } } DPRINTFN(3, "count=%d\n", sc->fifo_cnt); sc->fifo_cnt = 0; } static void run_iter_func(void *arg, struct ieee80211_node *ni) { struct run_softc *sc = arg; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = ic->ic_ifp; struct run_node *rn = (void *)ni; union run_stats sta[2]; uint16_t (*wstat)[3]; int txcnt, success, retrycnt, error; RUN_LOCK(sc); if (sc->rvp_cnt <= 1 && (vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_STA)) { /* read statistic counters (clear on read) and update AMRR state */ error = run_read_region_1(sc, RT2860_TX_STA_CNT0, (uint8_t *)sta, sizeof sta); if (error != 0) goto fail; /* count failed TX as errors */ ifp->if_oerrors += le16toh(sta[0].error.fail); retrycnt = le16toh(sta[1].tx.retry); success = le16toh(sta[1].tx.success); txcnt = retrycnt + success + le16toh(sta[0].error.fail); DPRINTFN(3, "retrycnt=%d success=%d failcnt=%d\n", retrycnt, success, le16toh(sta[0].error.fail)); } else { wstat = &(sc->wcid_stats[RUN_AID2WCID(ni->ni_associd)]); if (wstat == &(sc->wcid_stats[0]) || wstat > &(sc->wcid_stats[RT2870_WCID_MAX])) goto fail; txcnt = (*wstat)[RUN_TXCNT]; success = (*wstat)[RUN_SUCCESS]; retrycnt = (*wstat)[RUN_RETRY]; DPRINTFN(3, "retrycnt=%d txcnt=%d success=%d\n", retrycnt, txcnt, success); memset(wstat, 0, sizeof(*wstat)); } ieee80211_ratectl_tx_update(vap, ni, &txcnt, &success, &retrycnt); rn->amrr_ridx = ieee80211_ratectl_rate(ni, NULL, 0); fail: RUN_UNLOCK(sc); DPRINTFN(3, "ridx=%d\n", rn->amrr_ridx); } static void run_newassoc_cb(void *arg) { struct run_cmdq *cmdq = arg; struct ieee80211_node *ni = cmdq->arg1; struct run_softc *sc = ni->ni_vap->iv_ic->ic_ifp->if_softc; uint8_t wcid = cmdq->wcid; RUN_LOCK_ASSERT(sc, MA_OWNED); run_write_region_1(sc, RT2860_WCID_ENTRY(wcid), ni->ni_macaddr, IEEE80211_ADDR_LEN); memset(&(sc->wcid_stats[wcid]), 0, sizeof(sc->wcid_stats[wcid])); } static void run_newassoc(struct ieee80211_node *ni, int isnew) { struct run_node *rn = (void *)ni; struct ieee80211_rateset *rs = &ni->ni_rates; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = vap->iv_ic; struct run_softc *sc = ic->ic_ifp->if_softc; uint8_t rate; uint8_t ridx; uint8_t wcid; int i, j; wcid = (vap->iv_opmode == IEEE80211_M_STA) ? 1 : RUN_AID2WCID(ni->ni_associd); if (wcid > RT2870_WCID_MAX) { device_printf(sc->sc_dev, "wcid=%d out of range\n", wcid); return; } /* only interested in true associations */ if (isnew && ni->ni_associd != 0) { /* * This function could is called though timeout function. * Need to defer. */ uint32_t cnt = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", cnt); sc->cmdq[cnt].func = run_newassoc_cb; sc->cmdq[cnt].arg0 = NULL; sc->cmdq[cnt].arg1 = ni; sc->cmdq[cnt].wcid = wcid; ieee80211_runtask(ic, &sc->cmdq_task); } DPRINTF("new assoc isnew=%d associd=%x addr=%s\n", isnew, ni->ni_associd, ether_sprintf(ni->ni_macaddr)); for (i = 0; i < rs->rs_nrates; i++) { rate = rs->rs_rates[i] & IEEE80211_RATE_VAL; /* convert 802.11 rate to hardware rate index */ for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) if (rt2860_rates[ridx].rate == rate) break; rn->ridx[i] = ridx; /* determine rate of control response frames */ for (j = i; j >= 0; j--) { if ((rs->rs_rates[j] & IEEE80211_RATE_BASIC) && rt2860_rates[rn->ridx[i]].phy == rt2860_rates[rn->ridx[j]].phy) break; } if (j >= 0) { rn->ctl_ridx[i] = rn->ridx[j]; } else { /* no basic rate found, use mandatory one */ rn->ctl_ridx[i] = rt2860_rates[ridx].ctl_ridx; } DPRINTF("rate=0x%02x ridx=%d ctl_ridx=%d\n", rs->rs_rates[i], rn->ridx[i], rn->ctl_ridx[i]); } rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate; for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) if (rt2860_rates[ridx].rate == rate) break; rn->mgt_ridx = ridx; DPRINTF("rate=%d, mgmt_ridx=%d\n", rate, rn->mgt_ridx); usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); } /* * Return the Rx chain with the highest RSSI for a given frame. */ static __inline uint8_t run_maxrssi_chain(struct run_softc *sc, const struct rt2860_rxwi *rxwi) { uint8_t rxchain = 0; if (sc->nrxchains > 1) { if (rxwi->rssi[1] > rxwi->rssi[rxchain]) rxchain = 1; if (sc->nrxchains > 2) if (rxwi->rssi[2] > rxwi->rssi[rxchain]) rxchain = 2; } return (rxchain); } static void run_rx_frame(struct run_softc *sc, struct mbuf *m, uint32_t dmalen) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211_frame *wh; struct ieee80211_node *ni; struct rt2870_rxd *rxd; struct rt2860_rxwi *rxwi; uint32_t flags; uint16_t len, phy; uint8_t ant, rssi; int8_t nf; rxwi = mtod(m, struct rt2860_rxwi *); len = le16toh(rxwi->len) & 0xfff; if (__predict_false(len > dmalen)) { m_freem(m); ifp->if_ierrors++; DPRINTF("bad RXWI length %u > %u\n", len, dmalen); return; } /* Rx descriptor is located at the end */ rxd = (struct rt2870_rxd *)(mtod(m, caddr_t) + dmalen); flags = le32toh(rxd->flags); if (__predict_false(flags & (RT2860_RX_CRCERR | RT2860_RX_ICVERR))) { m_freem(m); ifp->if_ierrors++; DPRINTF("%s error.\n", (flags & RT2860_RX_CRCERR)?"CRC":"ICV"); return; } m->m_data += sizeof(struct rt2860_rxwi); m->m_pkthdr.len = m->m_len -= sizeof(struct rt2860_rxwi); wh = mtod(m, struct ieee80211_frame *); if (wh->i_fc[1] & IEEE80211_FC1_WEP) { wh->i_fc[1] &= ~IEEE80211_FC1_WEP; m->m_flags |= M_WEP; } if (flags & RT2860_RX_L2PAD) { DPRINTFN(8, "received RT2860_RX_L2PAD frame\n"); len += 2; } ni = ieee80211_find_rxnode(ic, mtod(m, struct ieee80211_frame_min *)); if (__predict_false(flags & RT2860_RX_MICERR)) { /* report MIC failures to net80211 for TKIP */ if (ni != NULL) ieee80211_notify_michael_failure(ni->ni_vap, wh, rxwi->keyidx); m_freem(m); ifp->if_ierrors++; DPRINTF("MIC error. Someone is lying.\n"); return; } ant = run_maxrssi_chain(sc, rxwi); rssi = rxwi->rssi[ant]; nf = run_rssi2dbm(sc, rssi, ant); m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = len; if (ni != NULL) { (void)ieee80211_input(ni, m, rssi, nf); ieee80211_free_node(ni); } else { (void)ieee80211_input_all(ic, m, rssi, nf); } if (__predict_false(ieee80211_radiotap_active(ic))) { struct run_rx_radiotap_header *tap = &sc->sc_rxtap; tap->wr_flags = 0; tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq); tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags); tap->wr_antsignal = rssi; tap->wr_antenna = ant; tap->wr_dbm_antsignal = run_rssi2dbm(sc, rssi, ant); tap->wr_rate = 2; /* in case it can't be found below */ phy = le16toh(rxwi->phy); switch (phy & RT2860_PHY_MODE) { case RT2860_PHY_CCK: switch ((phy & RT2860_PHY_MCS) & ~RT2860_PHY_SHPRE) { case 0: tap->wr_rate = 2; break; case 1: tap->wr_rate = 4; break; case 2: tap->wr_rate = 11; break; case 3: tap->wr_rate = 22; break; } if (phy & RT2860_PHY_SHPRE) tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; break; case RT2860_PHY_OFDM: switch (phy & RT2860_PHY_MCS) { case 0: tap->wr_rate = 12; break; case 1: tap->wr_rate = 18; break; case 2: tap->wr_rate = 24; break; case 3: tap->wr_rate = 36; break; case 4: tap->wr_rate = 48; break; case 5: tap->wr_rate = 72; break; case 6: tap->wr_rate = 96; break; case 7: tap->wr_rate = 108; break; } break; } } } static void run_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error) { struct run_softc *sc = usbd_xfer_softc(xfer); struct ifnet *ifp = sc->sc_ifp; struct mbuf *m = NULL; struct mbuf *m0; uint32_t dmalen; int xferlen; usbd_xfer_status(xfer, &xferlen, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: DPRINTFN(15, "rx done, actlen=%d\n", xferlen); if (xferlen < (int)(sizeof(uint32_t) + sizeof(struct rt2860_rxwi) + sizeof(struct rt2870_rxd))) { DPRINTF("xfer too short %d\n", xferlen); goto tr_setup; } m = sc->rx_m; sc->rx_m = NULL; /* FALLTHROUGH */ case USB_ST_SETUP: tr_setup: if (sc->rx_m == NULL) { sc->rx_m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE /* xfer can be bigger than MCLBYTES */); } if (sc->rx_m == NULL) { DPRINTF("could not allocate mbuf - idle with stall\n"); ifp->if_ierrors++; usbd_xfer_set_stall(xfer); usbd_xfer_set_frames(xfer, 0); } else { /* * Directly loading a mbuf cluster into DMA to * save some data copying. This works because * there is only one cluster. */ usbd_xfer_set_frame_data(xfer, 0, mtod(sc->rx_m, caddr_t), RUN_MAX_RXSZ); usbd_xfer_set_frames(xfer, 1); } usbd_transfer_submit(xfer); break; default: /* Error */ if (error != USB_ERR_CANCELLED) { /* try to clear stall first */ usbd_xfer_set_stall(xfer); if (error == USB_ERR_TIMEOUT) device_printf(sc->sc_dev, "device timeout\n"); ifp->if_ierrors++; goto tr_setup; } if (sc->rx_m != NULL) { m_freem(sc->rx_m); sc->rx_m = NULL; } break; } if (m == NULL) return; /* inputting all the frames must be last */ RUN_UNLOCK(sc); m->m_pkthdr.len = m->m_len = xferlen; /* HW can aggregate multiple 802.11 frames in a single USB xfer */ for(;;) { dmalen = le32toh(*mtod(m, uint32_t *)) & 0xffff; if ((dmalen >= (uint32_t)-8) || (dmalen == 0) || ((dmalen & 3) != 0)) { DPRINTF("bad DMA length %u\n", dmalen); break; } if ((dmalen + 8) > (uint32_t)xferlen) { DPRINTF("bad DMA length %u > %d\n", dmalen + 8, xferlen); break; } /* If it is the last one or a single frame, we won't copy. */ if ((xferlen -= dmalen + 8) <= 8) { /* trim 32-bit DMA-len header */ m->m_data += 4; m->m_pkthdr.len = m->m_len -= 4; run_rx_frame(sc, m, dmalen); break; } /* copy aggregated frames to another mbuf */ m0 = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (__predict_false(m0 == NULL)) { DPRINTF("could not allocate mbuf\n"); ifp->if_ierrors++; break; } m_copydata(m, 4 /* skip 32-bit DMA-len header */, dmalen + sizeof(struct rt2870_rxd), mtod(m0, caddr_t)); m0->m_pkthdr.len = m0->m_len = dmalen + sizeof(struct rt2870_rxd); run_rx_frame(sc, m0, dmalen); /* update data ptr */ m->m_data += dmalen + 8; m->m_pkthdr.len = m->m_len -= dmalen + 8; } RUN_LOCK(sc); } static void run_tx_free(struct run_endpoint_queue *pq, struct run_tx_data *data, int txerr) { if (data->m != NULL) { if (data->m->m_flags & M_TXCB) ieee80211_process_callback(data->ni, data->m, txerr ? ETIMEDOUT : 0); m_freem(data->m); data->m = NULL; if (data->ni == NULL) { DPRINTF("no node\n"); } else { ieee80211_free_node(data->ni); data->ni = NULL; } } STAILQ_INSERT_TAIL(&pq->tx_fh, data, next); pq->tx_nfree++; } static void run_bulk_tx_callbackN(struct usb_xfer *xfer, usb_error_t error, unsigned int index) { struct run_softc *sc = usbd_xfer_softc(xfer); struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct run_tx_data *data; struct ieee80211vap *vap = NULL; struct usb_page_cache *pc; struct run_endpoint_queue *pq = &sc->sc_epq[index]; struct mbuf *m; usb_frlength_t size; int actlen; int sumlen; usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: DPRINTFN(11, "transfer complete: %d " "bytes @ index %d\n", actlen, index); data = usbd_xfer_get_priv(xfer); run_tx_free(pq, data, 0); ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; usbd_xfer_set_priv(xfer, NULL); ifp->if_opackets++; /* FALLTHROUGH */ case USB_ST_SETUP: tr_setup: data = STAILQ_FIRST(&pq->tx_qh); if (data == NULL) break; STAILQ_REMOVE_HEAD(&pq->tx_qh, next); m = data->m; if ((m->m_pkthdr.len + sizeof(data->desc) + 3 + 8) > RUN_MAX_TXSZ) { DPRINTF("data overflow, %u bytes\n", m->m_pkthdr.len); ifp->if_oerrors++; run_tx_free(pq, data, 1); goto tr_setup; } pc = usbd_xfer_get_frame(xfer, 0); size = sizeof(data->desc); usbd_copy_in(pc, 0, &data->desc, size); usbd_m_copy_in(pc, size, m, 0, m->m_pkthdr.len); size += m->m_pkthdr.len; /* * Align end on a 4-byte boundary, pad 8 bytes (CRC + * 4-byte padding), and be sure to zero those trailing * bytes: */ usbd_frame_zero(pc, size, ((-size) & 3) + 8); size += ((-size) & 3) + 8; vap = data->ni->ni_vap; if (ieee80211_radiotap_active_vap(vap)) { struct run_tx_radiotap_header *tap = &sc->sc_txtap; struct rt2860_txwi *txwi = (struct rt2860_txwi *)(&data->desc + sizeof(struct rt2870_txd)); tap->wt_flags = 0; tap->wt_rate = rt2860_rates[data->ridx].rate; tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq); tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags); tap->wt_hwqueue = index; if (le16toh(txwi->phy) & RT2860_PHY_SHPRE) tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; ieee80211_radiotap_tx(vap, m); } DPRINTFN(11, "sending frame len=%u/%u @ index %d\n", m->m_pkthdr.len, size, index); usbd_xfer_set_frame_len(xfer, 0, size); usbd_xfer_set_priv(xfer, data); usbd_transfer_submit(xfer); RUN_UNLOCK(sc); run_start(ifp); RUN_LOCK(sc); break; default: DPRINTF("USB transfer error, %s\n", usbd_errstr(error)); data = usbd_xfer_get_priv(xfer); ifp->if_oerrors++; if (data != NULL) { if(data->ni != NULL) vap = data->ni->ni_vap; run_tx_free(pq, data, error); usbd_xfer_set_priv(xfer, NULL); } if (vap == NULL) vap = TAILQ_FIRST(&ic->ic_vaps); if (error != USB_ERR_CANCELLED) { if (error == USB_ERR_TIMEOUT) { device_printf(sc->sc_dev, "device timeout\n"); uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", i); sc->cmdq[i].func = run_usb_timeout_cb; sc->cmdq[i].arg0 = vap; ieee80211_runtask(ic, &sc->cmdq_task); } /* * Try to clear stall first, also if other * errors occur, hence clearing stall * introduces a 50 ms delay: */ usbd_xfer_set_stall(xfer); goto tr_setup; } break; } } static void run_bulk_tx_callback0(struct usb_xfer *xfer, usb_error_t error) { run_bulk_tx_callbackN(xfer, error, 0); } static void run_bulk_tx_callback1(struct usb_xfer *xfer, usb_error_t error) { run_bulk_tx_callbackN(xfer, error, 1); } static void run_bulk_tx_callback2(struct usb_xfer *xfer, usb_error_t error) { run_bulk_tx_callbackN(xfer, error, 2); } static void run_bulk_tx_callback3(struct usb_xfer *xfer, usb_error_t error) { run_bulk_tx_callbackN(xfer, error, 3); } static void run_bulk_tx_callback4(struct usb_xfer *xfer, usb_error_t error) { run_bulk_tx_callbackN(xfer, error, 4); } static void run_bulk_tx_callback5(struct usb_xfer *xfer, usb_error_t error) { run_bulk_tx_callbackN(xfer, error, 5); } static void run_set_tx_desc(struct run_softc *sc, struct run_tx_data *data) { struct mbuf *m = data->m; struct ieee80211com *ic = sc->sc_ifp->if_l2com; struct ieee80211vap *vap = data->ni->ni_vap; struct ieee80211_frame *wh; struct rt2870_txd *txd; struct rt2860_txwi *txwi; uint16_t xferlen; uint16_t mcs; uint8_t ridx = data->ridx; uint8_t pad; /* get MCS code from rate index */ mcs = rt2860_rates[ridx].mcs; xferlen = sizeof(*txwi) + m->m_pkthdr.len; /* roundup to 32-bit alignment */ xferlen = (xferlen + 3) & ~3; txd = (struct rt2870_txd *)&data->desc; txd->len = htole16(xferlen); wh = mtod(m, struct ieee80211_frame *); /* * Ether both are true or both are false, the header * are nicely aligned to 32-bit. So, no L2 padding. */ if(IEEE80211_HAS_ADDR4(wh) == IEEE80211_QOS_HAS_SEQ(wh)) pad = 0; else pad = 2; /* setup TX Wireless Information */ txwi = (struct rt2860_txwi *)(txd + 1); txwi->len = htole16(m->m_pkthdr.len - pad); if (rt2860_rates[ridx].phy == IEEE80211_T_DS) { txwi->phy = htole16(RT2860_PHY_CCK); if (ridx != RT2860_RIDX_CCK1 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) mcs |= RT2860_PHY_SHPRE; } else txwi->phy = htole16(RT2860_PHY_OFDM); txwi->phy |= htole16(mcs); /* check if RTS/CTS or CTS-to-self protection is required */ if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && (m->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold || ((ic->ic_flags & IEEE80211_F_USEPROT) && rt2860_rates[ridx].phy == IEEE80211_T_OFDM))) txwi->txop |= RT2860_TX_TXOP_HT; else txwi->txop |= RT2860_TX_TXOP_BACKOFF; if (vap->iv_opmode != IEEE80211_M_STA && !IEEE80211_QOS_HAS_SEQ(wh)) txwi->xflags |= RT2860_TX_NSEQ; } /* This function must be called locked */ static int run_tx(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_frame *wh; struct ieee80211_channel *chan; const struct ieee80211_txparam *tp; struct run_node *rn = (void *)ni; struct run_tx_data *data; struct rt2870_txd *txd; struct rt2860_txwi *txwi; uint16_t qos; uint16_t dur; uint16_t qid; uint8_t type; uint8_t tid; uint8_t ridx; uint8_t ctl_ridx; uint8_t qflags; uint8_t xflags = 0; int hasqos; RUN_LOCK_ASSERT(sc, MA_OWNED); wh = mtod(m, struct ieee80211_frame *); type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; /* * There are 7 bulk endpoints: 1 for RX * and 6 for TX (4 EDCAs + HCCA + Prio). * Update 03-14-2009: some devices like the Planex GW-US300MiniS * seem to have only 4 TX bulk endpoints (Fukaumi Naoki). */ if ((hasqos = IEEE80211_QOS_HAS_SEQ(wh))) { uint8_t *frm; if(IEEE80211_HAS_ADDR4(wh)) frm = ((struct ieee80211_qosframe_addr4 *)wh)->i_qos; else frm =((struct ieee80211_qosframe *)wh)->i_qos; qos = le16toh(*(const uint16_t *)frm); tid = qos & IEEE80211_QOS_TID; qid = TID_TO_WME_AC(tid); } else { qos = 0; tid = 0; qid = WME_AC_BE; } qflags = (qid < 4) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_HCCA; DPRINTFN(8, "qos %d\tqid %d\ttid %d\tqflags %x\n", qos, qid, tid, qflags); chan = (ni->ni_chan != IEEE80211_CHAN_ANYC)?ni->ni_chan:ic->ic_curchan; tp = &vap->iv_txparms[ieee80211_chan2mode(chan)]; /* pickup a rate index */ if (IEEE80211_IS_MULTICAST(wh->i_addr1) || type != IEEE80211_FC0_TYPE_DATA) { ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ? RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; ctl_ridx = rt2860_rates[ridx].ctl_ridx; } else { if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) ridx = rn->fix_ridx; else ridx = rn->amrr_ridx; ctl_ridx = rt2860_rates[ridx].ctl_ridx; } if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && (!hasqos || (qos & IEEE80211_QOS_ACKPOLICY) != IEEE80211_QOS_ACKPOLICY_NOACK)) { xflags |= RT2860_TX_ACK; if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) dur = rt2860_rates[ctl_ridx].sp_ack_dur; else dur = rt2860_rates[ctl_ridx].lp_ack_dur; *(uint16_t *)wh->i_dur = htole16(dur); } /* reserve slots for mgmt packets, just in case */ if (sc->sc_epq[qid].tx_nfree < 3) { DPRINTFN(10, "tx ring %d is full\n", qid); return (-1); } data = STAILQ_FIRST(&sc->sc_epq[qid].tx_fh); STAILQ_REMOVE_HEAD(&sc->sc_epq[qid].tx_fh, next); sc->sc_epq[qid].tx_nfree--; txd = (struct rt2870_txd *)&data->desc; txd->flags = qflags; txwi = (struct rt2860_txwi *)(txd + 1); txwi->xflags = xflags; if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { txwi->wcid = 0; } else { txwi->wcid = (vap->iv_opmode == IEEE80211_M_STA) ? 1 : RUN_AID2WCID(ni->ni_associd); } /* clear leftover garbage bits */ txwi->flags = 0; txwi->txop = 0; data->m = m; data->ni = ni; data->ridx = ridx; run_set_tx_desc(sc, data); /* * The chip keeps track of 2 kind of Tx stats, * * TX_STAT_FIFO, for per WCID stats, and * * TX_STA_CNT0 for all-TX-in-one stats. * * To use FIFO stats, we need to store MCS into the driver-private * PacketID field. So that, we can tell whose stats when we read them. * We add 1 to the MCS because setting the PacketID field to 0 means * that we don't want feedback in TX_STAT_FIFO. * And, that's what we want for STA mode, since TX_STA_CNT0 does the job. * * FIFO stats doesn't count Tx with WCID 0xff, so we do this in run_tx(). */ if (sc->rvp_cnt > 1 || vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_MBSS) { uint16_t pid = (rt2860_rates[ridx].mcs + 1) & 0xf; txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT); /* * Unlike PCI based devices, we don't get any interrupt from * USB devices, so we simulate FIFO-is-full interrupt here. * Ralink recomends to drain FIFO stats every 100 ms, but 16 slots * quickly get fulled. To prevent overflow, increment a counter on * every FIFO stat request, so we know how many slots are left. * We do this only in HOSTAP or multiple vap mode since FIFO stats * are used only in those modes. * We just drain stats. AMRR gets updated every 1 sec by * run_ratectl_cb() via callout. * Call it early. Otherwise overflow. */ if (sc->fifo_cnt++ == 10) { /* * With multiple vaps or if_bridge, if_start() is called * with a non-sleepable lock, tcpinp. So, need to defer. */ uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTFN(6, "cmdq_store=%d\n", i); sc->cmdq[i].func = run_drain_fifo; sc->cmdq[i].arg0 = sc; ieee80211_runtask(ic, &sc->cmdq_task); } } STAILQ_INSERT_TAIL(&sc->sc_epq[qid].tx_qh, data, next); usbd_transfer_start(sc->sc_xfer[qid]); DPRINTFN(8, "sending data frame len=%d rate=%d qid=%d\n", m->m_pkthdr.len + (int)(sizeof (struct rt2870_txd) + sizeof (struct rt2860_rxwi)), rt2860_rates[ridx].rate, qid); return (0); } static int run_tx_mgt(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct run_node *rn = (void *)ni; struct run_tx_data *data; struct ieee80211_frame *wh; struct rt2870_txd *txd; struct rt2860_txwi *txwi; uint16_t dur; uint8_t ridx = rn->mgt_ridx; uint8_t type; uint8_t xflags = 0; uint8_t wflags = 0; RUN_LOCK_ASSERT(sc, MA_OWNED); wh = mtod(m, struct ieee80211_frame *); type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; /* tell hardware to add timestamp for probe responses */ if ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) wflags |= RT2860_TX_TS; else if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { xflags |= RT2860_TX_ACK; dur = ieee80211_ack_duration(ic->ic_rt, rt2860_rates[ridx].rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); *(uint16_t *)wh->i_dur = htole16(dur); } if (sc->sc_epq[0].tx_nfree == 0) { /* let caller free mbuf */ ifp->if_drv_flags |= IFF_DRV_OACTIVE; return (EIO); } data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); sc->sc_epq[0].tx_nfree--; txd = (struct rt2870_txd *)&data->desc; txd->flags = RT2860_TX_QSEL_EDCA; txwi = (struct rt2860_txwi *)(txd + 1); txwi->wcid = 0xff; txwi->flags = wflags; txwi->xflags = xflags; txwi->txop = 0; /* clear leftover garbage bits */ data->m = m; data->ni = ni; data->ridx = ridx; run_set_tx_desc(sc, data); DPRINTFN(10, "sending mgt frame len=%d rate=%d\n", m->m_pkthdr.len + (int)(sizeof (struct rt2870_txd) + sizeof (struct rt2860_rxwi)), rt2860_rates[ridx].rate); STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); usbd_transfer_start(sc->sc_xfer[0]); return (0); } static int run_sendprot(struct run_softc *sc, const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; struct run_tx_data *data; struct rt2870_txd *txd; struct rt2860_txwi *txwi; struct mbuf *mprot; int ridx; int protrate; int ackrate; int pktlen; int isshort; uint16_t dur; uint8_t type; uint8_t wflags = 0; uint8_t xflags = 0; RUN_LOCK_ASSERT(sc, MA_OWNED); KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY, ("protection %d", prot)); wh = mtod(m, struct ieee80211_frame *); pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN; type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; protrate = ieee80211_ctl_rate(ic->ic_rt, rate); ackrate = ieee80211_ack_rate(ic->ic_rt, rate); isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0; dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort) + ieee80211_ack_duration(ic->ic_rt, rate, isshort); wflags = RT2860_TX_FRAG; /* check that there are free slots before allocating the mbuf */ if (sc->sc_epq[0].tx_nfree == 0) { /* let caller free mbuf */ sc->sc_ifp->if_drv_flags |= IFF_DRV_OACTIVE; return (ENOBUFS); } if (prot == IEEE80211_PROT_RTSCTS) { /* NB: CTS is the same size as an ACK */ dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort); xflags |= RT2860_TX_ACK; mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur); } else { mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur); } if (mprot == NULL) { sc->sc_ifp->if_oerrors++; DPRINTF("could not allocate mbuf\n"); return (ENOBUFS); } data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); sc->sc_epq[0].tx_nfree--; txd = (struct rt2870_txd *)&data->desc; txd->flags = RT2860_TX_QSEL_EDCA; txwi = (struct rt2860_txwi *)(txd + 1); txwi->wcid = 0xff; txwi->flags = wflags; txwi->xflags = xflags; txwi->txop = 0; /* clear leftover garbage bits */ data->m = mprot; data->ni = ieee80211_ref_node(ni); for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) if (rt2860_rates[ridx].rate == protrate) break; data->ridx = ridx; run_set_tx_desc(sc, data); DPRINTFN(1, "sending prot len=%u rate=%u\n", m->m_pkthdr.len, rate); STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); usbd_transfer_start(sc->sc_xfer[0]); return (0); } static int run_tx_param(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; struct run_tx_data *data; struct rt2870_txd *txd; struct rt2860_txwi *txwi; uint8_t type; uint8_t ridx; uint8_t rate; uint8_t opflags = 0; uint8_t xflags = 0; int error; RUN_LOCK_ASSERT(sc, MA_OWNED); KASSERT(params != NULL, ("no raw xmit params")); wh = mtod(m, struct ieee80211_frame *); type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; rate = params->ibp_rate0; if (!ieee80211_isratevalid(ic->ic_rt, rate)) { /* let caller free mbuf */ return (EINVAL); } if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) xflags |= RT2860_TX_ACK; if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) { error = run_sendprot(sc, m, ni, params->ibp_flags & IEEE80211_BPF_RTS ? IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY, rate); if (error) { /* let caller free mbuf */ return error; } opflags |= /*XXX RT2573_TX_LONG_RETRY |*/ RT2860_TX_TXOP_SIFS; } if (sc->sc_epq[0].tx_nfree == 0) { /* let caller free mbuf */ sc->sc_ifp->if_drv_flags |= IFF_DRV_OACTIVE; DPRINTF("sending raw frame, but tx ring is full\n"); return (EIO); } data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); sc->sc_epq[0].tx_nfree--; txd = (struct rt2870_txd *)&data->desc; txd->flags = RT2860_TX_QSEL_EDCA; txwi = (struct rt2860_txwi *)(txd + 1); txwi->wcid = 0xff; txwi->xflags = xflags; txwi->txop = opflags; txwi->flags = 0; /* clear leftover garbage bits */ data->m = m; data->ni = ni; for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) if (rt2860_rates[ridx].rate == rate) break; data->ridx = ridx; run_set_tx_desc(sc, data); DPRINTFN(10, "sending raw frame len=%u rate=%u\n", m->m_pkthdr.len, rate); STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); usbd_transfer_start(sc->sc_xfer[0]); return (0); } static int run_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { struct ifnet *ifp = ni->ni_ic->ic_ifp; struct run_softc *sc = ifp->if_softc; int error = 0; RUN_LOCK(sc); /* prevent management frames from being sent if we're not ready */ if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { error = ENETDOWN; goto done; } if (params == NULL) { /* tx mgt packet */ if ((error = run_tx_mgt(sc, m, ni)) != 0) { ifp->if_oerrors++; DPRINTF("mgt tx failed\n"); goto done; } } else { /* tx raw packet with param */ if ((error = run_tx_param(sc, m, ni, params)) != 0) { ifp->if_oerrors++; DPRINTF("tx with param failed\n"); goto done; } } ifp->if_opackets++; done: RUN_UNLOCK(sc); if (error != 0) { if(m != NULL) m_freem(m); ieee80211_free_node(ni); } return (error); } static void run_start(struct ifnet *ifp) { struct run_softc *sc = ifp->if_softc; struct ieee80211_node *ni; struct mbuf *m; RUN_LOCK(sc); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { RUN_UNLOCK(sc); return; } for (;;) { /* send data frames */ IFQ_DRV_DEQUEUE(&ifp->if_snd, m); if (m == NULL) break; ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; if (run_tx(sc, m, ni) != 0) { IFQ_DRV_PREPEND(&ifp->if_snd, m); ifp->if_drv_flags |= IFF_DRV_OACTIVE; break; } } RUN_UNLOCK(sc); } static int run_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct run_softc *sc = ifp->if_softc; struct ieee80211com *ic = sc->sc_ifp->if_l2com; struct ifreq *ifr = (struct ifreq *) data; int startall = 0; int error = 0; switch (cmd) { case SIOCSIFFLAGS: RUN_LOCK(sc); if (ifp->if_flags & IFF_UP) { if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)){ startall = 1; run_init_locked(sc); } else run_update_promisc_locked(ifp); } else { if (ifp->if_drv_flags & IFF_DRV_RUNNING && (ic->ic_nrunning == 0 || sc->rvp_cnt <= 1)) { run_stop(sc); } } RUN_UNLOCK(sc); if (startall) ieee80211_start_all(ic); break; case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); break; case SIOCGIFADDR: error = ether_ioctl(ifp, cmd, data); break; default: error = EINVAL; break; } return (error); } static void run_set_agc(struct run_softc *sc, uint8_t agc) { uint8_t bbp; if (sc->mac_ver == 0x3572) { run_bbp_read(sc, 27, &bbp); bbp &= ~(0x3 << 5); run_bbp_write(sc, 27, bbp | 0 << 5); /* select Rx0 */ run_bbp_write(sc, 66, agc); run_bbp_write(sc, 27, bbp | 1 << 5); /* select Rx1 */ run_bbp_write(sc, 66, agc); } else run_bbp_write(sc, 66, agc); } static void run_select_chan_group(struct run_softc *sc, int group) { uint32_t tmp; uint8_t agc; run_bbp_write(sc, 62, 0x37 - sc->lna[group]); run_bbp_write(sc, 63, 0x37 - sc->lna[group]); run_bbp_write(sc, 64, 0x37 - sc->lna[group]); run_bbp_write(sc, 86, 0x00); if (group == 0) { if (sc->ext_2ghz_lna) { run_bbp_write(sc, 82, 0x62); run_bbp_write(sc, 75, 0x46); } else { run_bbp_write(sc, 82, 0x84); run_bbp_write(sc, 75, 0x50); } } else { if (sc->mac_ver == 0x3572) run_bbp_write(sc, 82, 0x94); else run_bbp_write(sc, 82, 0xf2); if (sc->ext_5ghz_lna) run_bbp_write(sc, 75, 0x46); else run_bbp_write(sc, 75, 0x50); } run_read(sc, RT2860_TX_BAND_CFG, &tmp); tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P); tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P; run_write(sc, RT2860_TX_BAND_CFG, tmp); /* enable appropriate Power Amplifiers and Low Noise Amplifiers */ tmp = RT2860_RFTR_EN | RT2860_TRSW_EN | RT2860_LNA_PE0_EN; if (sc->nrxchains > 1) tmp |= RT2860_LNA_PE1_EN; if (group == 0) { /* 2GHz */ tmp |= RT2860_PA_PE_G0_EN; if (sc->ntxchains > 1) tmp |= RT2860_PA_PE_G1_EN; } else { /* 5GHz */ tmp |= RT2860_PA_PE_A0_EN; if (sc->ntxchains > 1) tmp |= RT2860_PA_PE_A1_EN; } if (sc->mac_ver == 0x3572) { run_rt3070_rf_write(sc, 8, 0x00); run_write(sc, RT2860_TX_PIN_CFG, tmp); run_rt3070_rf_write(sc, 8, 0x80); } else run_write(sc, RT2860_TX_PIN_CFG, tmp); /* set initial AGC value */ if (group == 0) { /* 2GHz band */ if (sc->mac_ver >= 0x3070) agc = 0x1c + sc->lna[0] * 2; else agc = 0x2e + sc->lna[0]; } else { /* 5GHz band */ if (sc->mac_ver == 0x3572) agc = 0x22 + (sc->lna[group] * 5) / 3; else agc = 0x32 + (sc->lna[group] * 5) / 3; } run_set_agc(sc, agc); } static void run_rt2870_set_chan(struct run_softc *sc, uint32_t chan) { const struct rfprog *rfprog = rt2860_rf2850; uint32_t r2, r3, r4; int8_t txpow1, txpow2; int i; /* find the settings for this channel (we know it exists) */ for (i = 0; rfprog[i].chan != chan; i++); r2 = rfprog[i].r2; if (sc->ntxchains == 1) r2 |= 1 << 12; /* 1T: disable Tx chain 2 */ if (sc->nrxchains == 1) r2 |= 1 << 15 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ else if (sc->nrxchains == 2) r2 |= 1 << 4; /* 2R: disable Rx chain 3 */ /* use Tx power values from EEPROM */ txpow1 = sc->txpow1[i]; txpow2 = sc->txpow2[i]; if (chan > 14) { if (txpow1 >= 0) txpow1 = txpow1 << 1 | 1; else txpow1 = (7 + txpow1) << 1; if (txpow2 >= 0) txpow2 = txpow2 << 1 | 1; else txpow2 = (7 + txpow2) << 1; } r3 = rfprog[i].r3 | txpow1 << 7; r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4; run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1); run_rt2870_rf_write(sc, RT2860_RF2, r2); run_rt2870_rf_write(sc, RT2860_RF3, r3); run_rt2870_rf_write(sc, RT2860_RF4, r4); run_delay(sc, 10); run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1); run_rt2870_rf_write(sc, RT2860_RF2, r2); run_rt2870_rf_write(sc, RT2860_RF3, r3 | 1); run_rt2870_rf_write(sc, RT2860_RF4, r4); run_delay(sc, 10); run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1); run_rt2870_rf_write(sc, RT2860_RF2, r2); run_rt2870_rf_write(sc, RT2860_RF3, r3); run_rt2870_rf_write(sc, RT2860_RF4, r4); } static void run_rt3070_set_chan(struct run_softc *sc, uint32_t chan) { int8_t txpow1, txpow2; uint8_t rf; int i; /* RT3070 is 2GHz only */ KASSERT(chan >= 1 && chan <= 14, ("wrong channel selected\n")); /* find the settings for this channel (we know it exists) */ for (i = 0; rt2860_rf2850[i].chan != chan; i++); /* use Tx power values from EEPROM */ txpow1 = sc->txpow1[i]; txpow2 = sc->txpow2[i]; run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k); run_rt3070_rf_read(sc, 6, &rf); rf = (rf & ~0x03) | rt3070_freqs[i].r; run_rt3070_rf_write(sc, 6, rf); /* set Tx0 power */ run_rt3070_rf_read(sc, 12, &rf); rf = (rf & ~0x1f) | txpow1; run_rt3070_rf_write(sc, 12, rf); /* set Tx1 power */ run_rt3070_rf_read(sc, 13, &rf); rf = (rf & ~0x1f) | txpow2; run_rt3070_rf_write(sc, 13, rf); run_rt3070_rf_read(sc, 1, &rf); rf &= ~0xfc; if (sc->ntxchains == 1) rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */ else if (sc->ntxchains == 2) rf |= 1 << 7; /* 2T: disable Tx chain 3 */ if (sc->nrxchains == 1) rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ else if (sc->nrxchains == 2) rf |= 1 << 6; /* 2R: disable Rx chain 3 */ run_rt3070_rf_write(sc, 1, rf); /* set RF offset */ run_rt3070_rf_read(sc, 23, &rf); rf = (rf & ~0x7f) | sc->freq; run_rt3070_rf_write(sc, 23, rf); /* program RF filter */ run_rt3070_rf_read(sc, 24, &rf); /* Tx */ rf = (rf & ~0x3f) | sc->rf24_20mhz; run_rt3070_rf_write(sc, 24, rf); run_rt3070_rf_read(sc, 31, &rf); /* Rx */ rf = (rf & ~0x3f) | sc->rf24_20mhz; run_rt3070_rf_write(sc, 31, rf); /* enable RF tuning */ run_rt3070_rf_read(sc, 7, &rf); run_rt3070_rf_write(sc, 7, rf | 0x01); } static void run_rt3572_set_chan(struct run_softc *sc, u_int chan) { int8_t txpow1, txpow2; uint32_t tmp; uint8_t rf; int i; /* find the settings for this channel (we know it exists) */ for (i = 0; rt2860_rf2850[i].chan != chan; i++); /* use Tx power values from EEPROM */ txpow1 = sc->txpow1[i]; txpow2 = sc->txpow2[i]; if (chan <= 14) { run_bbp_write(sc, 25, sc->bbp25); run_bbp_write(sc, 26, sc->bbp26); } else { /* enable IQ phase correction */ run_bbp_write(sc, 25, 0x09); run_bbp_write(sc, 26, 0xff); } run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k); run_rt3070_rf_read(sc, 6, &rf); rf = (rf & ~0x0f) | rt3070_freqs[i].r; rf |= (chan <= 14) ? 0x08 : 0x04; run_rt3070_rf_write(sc, 6, rf); /* set PLL mode */ run_rt3070_rf_read(sc, 5, &rf); rf &= ~(0x08 | 0x04); rf |= (chan <= 14) ? 0x04 : 0x08; run_rt3070_rf_write(sc, 5, rf); /* set Tx power for chain 0 */ if (chan <= 14) rf = 0x60 | txpow1; else rf = 0xe0 | (txpow1 & 0xc) << 1 | (txpow1 & 0x3); run_rt3070_rf_write(sc, 12, rf); /* set Tx power for chain 1 */ if (chan <= 14) rf = 0x60 | txpow2; else rf = 0xe0 | (txpow2 & 0xc) << 1 | (txpow2 & 0x3); run_rt3070_rf_write(sc, 13, rf); /* set Tx/Rx streams */ run_rt3070_rf_read(sc, 1, &rf); rf &= ~0xfc; if (sc->ntxchains == 1) rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */ else if (sc->ntxchains == 2) rf |= 1 << 7; /* 2T: disable Tx chain 3 */ if (sc->nrxchains == 1) rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ else if (sc->nrxchains == 2) rf |= 1 << 6; /* 2R: disable Rx chain 3 */ run_rt3070_rf_write(sc, 1, rf); /* set RF offset */ run_rt3070_rf_read(sc, 23, &rf); rf = (rf & ~0x7f) | sc->freq; run_rt3070_rf_write(sc, 23, rf); /* program RF filter */ rf = sc->rf24_20mhz; run_rt3070_rf_write(sc, 24, rf); /* Tx */ run_rt3070_rf_write(sc, 31, rf); /* Rx */ /* enable RF tuning */ run_rt3070_rf_read(sc, 7, &rf); rf = (chan <= 14) ? 0xd8 : ((rf & ~0xc8) | 0x14); run_rt3070_rf_write(sc, 7, rf); /* TSSI */ rf = (chan <= 14) ? 0xc3 : 0xc0; run_rt3070_rf_write(sc, 9, rf); /* set loop filter 1 */ run_rt3070_rf_write(sc, 10, 0xf1); /* set loop filter 2 */ run_rt3070_rf_write(sc, 11, (chan <= 14) ? 0xb9 : 0x00); /* set tx_mx2_ic */ run_rt3070_rf_write(sc, 15, (chan <= 14) ? 0x53 : 0x43); /* set tx_mx1_ic */ if (chan <= 14) rf = 0x48 | sc->txmixgain_2ghz; else rf = 0x78 | sc->txmixgain_5ghz; run_rt3070_rf_write(sc, 16, rf); /* set tx_lo1 */ run_rt3070_rf_write(sc, 17, 0x23); /* set tx_lo2 */ if (chan <= 14) rf = 0x93; else if (chan <= 64) rf = 0xb7; else if (chan <= 128) rf = 0x74; else rf = 0x72; run_rt3070_rf_write(sc, 19, rf); /* set rx_lo1 */ if (chan <= 14) rf = 0xb3; else if (chan <= 64) rf = 0xf6; else if (chan <= 128) rf = 0xf4; else rf = 0xf3; run_rt3070_rf_write(sc, 20, rf); /* set pfd_delay */ if (chan <= 14) rf = 0x15; else if (chan <= 64) rf = 0x3d; else rf = 0x01; run_rt3070_rf_write(sc, 25, rf); /* set rx_lo2 */ run_rt3070_rf_write(sc, 26, (chan <= 14) ? 0x85 : 0x87); /* set ldo_rf_vc */ run_rt3070_rf_write(sc, 27, (chan <= 14) ? 0x00 : 0x01); /* set drv_cc */ run_rt3070_rf_write(sc, 29, (chan <= 14) ? 0x9b : 0x9f); run_read(sc, RT2860_GPIO_CTRL, &tmp); tmp &= ~0x8080; if (chan <= 14) tmp |= 0x80; run_write(sc, RT2860_GPIO_CTRL, tmp); /* enable RF tuning */ run_rt3070_rf_read(sc, 7, &rf); run_rt3070_rf_write(sc, 7, rf | 0x01); run_delay(sc, 2); } static void run_set_rx_antenna(struct run_softc *sc, int aux) { uint32_t tmp; if (aux) { run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 0); run_read(sc, RT2860_GPIO_CTRL, &tmp); run_write(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08); } else { run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 1); run_read(sc, RT2860_GPIO_CTRL, &tmp); run_write(sc, RT2860_GPIO_CTRL, tmp & ~0x0808); } } static int run_set_chan(struct run_softc *sc, struct ieee80211_channel *c) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; uint32_t chan, group; chan = ieee80211_chan2ieee(ic, c); if (chan == 0 || chan == IEEE80211_CHAN_ANY) return (EINVAL); if (sc->mac_ver == 0x3572) run_rt3572_set_chan(sc, chan); else if (sc->mac_ver >= 0x3070) run_rt3070_set_chan(sc, chan); else run_rt2870_set_chan(sc, chan); /* determine channel group */ if (chan <= 14) group = 0; else if (chan <= 64) group = 1; else if (chan <= 128) group = 2; else group = 3; /* XXX necessary only when group has changed! */ run_select_chan_group(sc, group); run_delay(sc, 10); return (0); } static void run_set_channel(struct ieee80211com *ic) { struct run_softc *sc = ic->ic_ifp->if_softc; RUN_LOCK(sc); run_set_chan(sc, ic->ic_curchan); RUN_UNLOCK(sc); return; } static void run_scan_start(struct ieee80211com *ic) { struct run_softc *sc = ic->ic_ifp->if_softc; uint32_t tmp; RUN_LOCK(sc); /* abort TSF synchronization */ run_read(sc, RT2860_BCN_TIME_CFG, &tmp); run_write(sc, RT2860_BCN_TIME_CFG, tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN)); run_set_bssid(sc, sc->sc_ifp->if_broadcastaddr); RUN_UNLOCK(sc); return; } static void run_scan_end(struct ieee80211com *ic) { struct run_softc *sc = ic->ic_ifp->if_softc; RUN_LOCK(sc); run_enable_tsf_sync(sc); /* XXX keep local copy */ run_set_bssid(sc, sc->sc_bssid); RUN_UNLOCK(sc); return; } /* * Could be called from ieee80211_node_timeout() * (non-sleepable thread) */ static void run_update_beacon(struct ieee80211vap *vap, int item) { struct ieee80211com *ic = vap->iv_ic; struct run_softc *sc = ic->ic_ifp->if_softc; struct run_vap *rvp = RUN_VAP(vap); int mcast = 0; uint32_t i; KASSERT(vap != NULL, ("no beacon")); switch (item) { case IEEE80211_BEACON_ERP: run_updateslot(ic->ic_ifp); break; case IEEE80211_BEACON_HTINFO: run_updateprot(ic); break; case IEEE80211_BEACON_TIM: mcast = 1; /*TODO*/ break; default: break; } setbit(rvp->bo.bo_flags, item); ieee80211_beacon_update(vap->iv_bss, &rvp->bo, rvp->beacon_mbuf, mcast); i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", i); sc->cmdq[i].func = run_update_beacon_cb; sc->cmdq[i].arg0 = vap; ieee80211_runtask(ic, &sc->cmdq_task); return; } static void run_update_beacon_cb(void *arg) { struct ieee80211vap *vap = arg; struct run_vap *rvp = RUN_VAP(vap); struct ieee80211com *ic = vap->iv_ic; struct run_softc *sc = ic->ic_ifp->if_softc; struct rt2860_txwi txwi; struct mbuf *m; uint8_t ridx; if (vap->iv_bss->ni_chan == IEEE80211_CHAN_ANYC) return; if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) return; /* * No need to call ieee80211_beacon_update(), run_update_beacon() * is taking care of apropriate calls. */ if (rvp->beacon_mbuf == NULL) { rvp->beacon_mbuf = ieee80211_beacon_alloc(vap->iv_bss, &rvp->bo); if (rvp->beacon_mbuf == NULL) return; } m = rvp->beacon_mbuf; memset(&txwi, 0, sizeof txwi); txwi.wcid = 0xff; txwi.len = htole16(m->m_pkthdr.len); /* send beacons at the lowest available rate */ ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ? RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; txwi.phy = htole16(rt2860_rates[ridx].mcs); if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM) txwi.phy |= htole16(RT2860_PHY_OFDM); txwi.txop = RT2860_TX_TXOP_HT; txwi.flags = RT2860_TX_TS; txwi.xflags = RT2860_TX_NSEQ; run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id), (uint8_t *)&txwi, sizeof txwi); run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id) + sizeof txwi, mtod(m, uint8_t *), (m->m_pkthdr.len + 1) & ~1); /* roundup len */ return; } static void run_updateprot(struct ieee80211com *ic) { struct run_softc *sc = ic->ic_ifp->if_softc; uint32_t i; i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", i); sc->cmdq[i].func = run_updateprot_cb; sc->cmdq[i].arg0 = ic; ieee80211_runtask(ic, &sc->cmdq_task); } static void run_updateprot_cb(void *arg) { struct ieee80211com *ic = arg; struct run_softc *sc = ic->ic_ifp->if_softc; uint32_t tmp; tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL; /* setup protection frame rate (MCS code) */ tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ? rt2860_rates[RT2860_RIDX_OFDM6].mcs : rt2860_rates[RT2860_RIDX_CCK11].mcs; /* CCK frames don't require protection */ run_write(sc, RT2860_CCK_PROT_CFG, tmp); if (ic->ic_flags & IEEE80211_F_USEPROT) { if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) tmp |= RT2860_PROT_CTRL_RTS_CTS; else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) tmp |= RT2860_PROT_CTRL_CTS; } run_write(sc, RT2860_OFDM_PROT_CFG, tmp); } static void run_usb_timeout_cb(void *arg) { struct ieee80211vap *vap = arg; struct run_softc *sc = vap->iv_ic->ic_ifp->if_softc; RUN_LOCK_ASSERT(sc, MA_OWNED); if(vap->iv_state == IEEE80211_S_RUN && vap->iv_opmode != IEEE80211_M_STA) run_reset_livelock(sc); else if (vap->iv_state == IEEE80211_S_SCAN) { DPRINTF("timeout caused by scan\n"); /* cancel bgscan */ ieee80211_cancel_scan(vap); } else DPRINTF("timeout by unknown cause\n"); } static void run_reset_livelock(struct run_softc *sc) { uint32_t tmp; RUN_LOCK_ASSERT(sc, MA_OWNED); /* * In IBSS or HostAP modes (when the hardware sends beacons), the MAC * can run into a livelock and start sending CTS-to-self frames like * crazy if protection is enabled. Reset MAC/BBP for a while */ run_read(sc, RT2860_DEBUG, &tmp); DPRINTFN(3, "debug reg %08x\n", tmp); if ((tmp & (1 << 29)) && (tmp & (1 << 7 | 1 << 5))) { DPRINTF("CTS-to-self livelock detected\n"); run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_SRST); run_delay(sc, 1); run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); } } static void run_update_promisc_locked(struct ifnet *ifp) { struct run_softc *sc = ifp->if_softc; uint32_t tmp; run_read(sc, RT2860_RX_FILTR_CFG, &tmp); tmp |= RT2860_DROP_UC_NOME; if (ifp->if_flags & IFF_PROMISC) tmp &= ~RT2860_DROP_UC_NOME; run_write(sc, RT2860_RX_FILTR_CFG, tmp); DPRINTF("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ? "entering" : "leaving"); } static void run_update_promisc(struct ifnet *ifp) { struct run_softc *sc = ifp->if_softc; if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) return; RUN_LOCK(sc); run_update_promisc_locked(ifp); RUN_UNLOCK(sc); } static void run_enable_tsf_sync(struct run_softc *sc) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); uint32_t tmp; DPRINTF("rvp_id=%d ic_opmode=%d\n", RUN_VAP(vap)->rvp_id, ic->ic_opmode); run_read(sc, RT2860_BCN_TIME_CFG, &tmp); tmp &= ~0x1fffff; tmp |= vap->iv_bss->ni_intval * 16; tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN; if (ic->ic_opmode == IEEE80211_M_STA) { /* * Local TSF is always updated with remote TSF on beacon * reception. */ tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT; } else if (ic->ic_opmode == IEEE80211_M_IBSS) { tmp |= RT2860_BCN_TX_EN; /* * Local TSF is updated with remote TSF on beacon reception * only if the remote TSF is greater than local TSF. */ tmp |= 2 << RT2860_TSF_SYNC_MODE_SHIFT; } else if (ic->ic_opmode == IEEE80211_M_HOSTAP || ic->ic_opmode == IEEE80211_M_MBSS) { tmp |= RT2860_BCN_TX_EN; /* SYNC with nobody */ tmp |= 3 << RT2860_TSF_SYNC_MODE_SHIFT; } else { DPRINTF("Enabling TSF failed. undefined opmode\n"); return; } run_write(sc, RT2860_BCN_TIME_CFG, tmp); } static void run_enable_mrr(struct run_softc *sc) { #define CCK(mcs) (mcs) #define OFDM(mcs) (1 << 3 | (mcs)) run_write(sc, RT2860_LG_FBK_CFG0, OFDM(6) << 28 | /* 54->48 */ OFDM(5) << 24 | /* 48->36 */ OFDM(4) << 20 | /* 36->24 */ OFDM(3) << 16 | /* 24->18 */ OFDM(2) << 12 | /* 18->12 */ OFDM(1) << 8 | /* 12-> 9 */ OFDM(0) << 4 | /* 9-> 6 */ OFDM(0)); /* 6-> 6 */ run_write(sc, RT2860_LG_FBK_CFG1, CCK(2) << 12 | /* 11->5.5 */ CCK(1) << 8 | /* 5.5-> 2 */ CCK(0) << 4 | /* 2-> 1 */ CCK(0)); /* 1-> 1 */ #undef OFDM #undef CCK } static void run_set_txpreamble(struct run_softc *sc) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; uint32_t tmp; run_read(sc, RT2860_AUTO_RSP_CFG, &tmp); if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) tmp |= RT2860_CCK_SHORT_EN; else tmp &= ~RT2860_CCK_SHORT_EN; run_write(sc, RT2860_AUTO_RSP_CFG, tmp); } static void run_set_basicrates(struct run_softc *sc) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; /* set basic rates mask */ if (ic->ic_curmode == IEEE80211_MODE_11B) run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x003); else if (ic->ic_curmode == IEEE80211_MODE_11A) run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x150); else /* 11g */ run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x15f); } static void run_set_leds(struct run_softc *sc, uint16_t which) { (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LEDS, which | (sc->leds & 0x7f)); } static void run_set_bssid(struct run_softc *sc, const uint8_t *bssid) { run_write(sc, RT2860_MAC_BSSID_DW0, bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24); run_write(sc, RT2860_MAC_BSSID_DW1, bssid[4] | bssid[5] << 8); } static void run_set_macaddr(struct run_softc *sc, const uint8_t *addr) { run_write(sc, RT2860_MAC_ADDR_DW0, addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24); run_write(sc, RT2860_MAC_ADDR_DW1, addr[4] | addr[5] << 8 | 0xff << 16); } static void run_updateslot(struct ifnet *ifp) { struct run_softc *sc = ifp->if_softc; struct ieee80211com *ic = ifp->if_l2com; uint32_t i; i = RUN_CMDQ_GET(&sc->cmdq_store); DPRINTF("cmdq_store=%d\n", i); sc->cmdq[i].func = run_updateslot_cb; sc->cmdq[i].arg0 = ifp; ieee80211_runtask(ic, &sc->cmdq_task); return; } /* ARGSUSED */ static void run_updateslot_cb(void *arg) { struct ifnet *ifp = arg; struct run_softc *sc = ifp->if_softc; struct ieee80211com *ic = ifp->if_l2com; uint32_t tmp; run_read(sc, RT2860_BKOFF_SLOT_CFG, &tmp); tmp &= ~0xff; tmp |= (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; run_write(sc, RT2860_BKOFF_SLOT_CFG, tmp); } static void run_update_mcast(struct ifnet *ifp) { /* h/w filter supports getting everything or nothing */ ifp->if_flags |= IFF_ALLMULTI; } static int8_t run_rssi2dbm(struct run_softc *sc, uint8_t rssi, uint8_t rxchain) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; struct ieee80211_channel *c = ic->ic_curchan; int delta; if (IEEE80211_IS_CHAN_5GHZ(c)) { uint32_t chan = ieee80211_chan2ieee(ic, c); delta = sc->rssi_5ghz[rxchain]; /* determine channel group */ if (chan <= 64) delta -= sc->lna[1]; else if (chan <= 128) delta -= sc->lna[2]; else delta -= sc->lna[3]; } else delta = sc->rssi_2ghz[rxchain] - sc->lna[0]; return (-12 - delta - rssi); } static int run_bbp_init(struct run_softc *sc) { int i, error, ntries; uint8_t bbp0; /* wait for BBP to wake up */ for (ntries = 0; ntries < 20; ntries++) { if ((error = run_bbp_read(sc, 0, &bbp0)) != 0) return error; if (bbp0 != 0 && bbp0 != 0xff) break; } if (ntries == 20) return (ETIMEDOUT); /* initialize BBP registers to default values */ for (i = 0; i < N(rt2860_def_bbp); i++) { run_bbp_write(sc, rt2860_def_bbp[i].reg, rt2860_def_bbp[i].val); } /* fix BBP84 for RT2860E */ if (sc->mac_ver == 0x2860 && sc->mac_rev != 0x0101) run_bbp_write(sc, 84, 0x19); if (sc->mac_ver >= 0x3070) { run_bbp_write(sc, 79, 0x13); run_bbp_write(sc, 80, 0x05); run_bbp_write(sc, 81, 0x33); } else if (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) { run_bbp_write(sc, 69, 0x16); run_bbp_write(sc, 73, 0x12); } return (0); } static int run_rt3070_rf_init(struct run_softc *sc) { uint32_t tmp; uint8_t rf, target, bbp4; int i; run_rt3070_rf_read(sc, 30, &rf); /* toggle RF R30 bit 7 */ run_rt3070_rf_write(sc, 30, rf | 0x80); run_delay(sc, 10); run_rt3070_rf_write(sc, 30, rf & ~0x80); /* initialize RF registers to default value */ if (sc->mac_ver == 0x3572) { for (i = 0; i < N(rt3572_def_rf); i++) { run_rt3070_rf_write(sc, rt3572_def_rf[i].reg, rt3572_def_rf[i].val); } } else { for (i = 0; i < N(rt3070_def_rf); i++) { run_rt3070_rf_write(sc, rt3070_def_rf[i].reg, rt3070_def_rf[i].val); } } if (sc->mac_ver == 0x3070) { /* change voltage from 1.2V to 1.35V for RT3070 */ run_read(sc, RT3070_LDO_CFG0, &tmp); tmp = (tmp & ~0x0f000000) | 0x0d000000; run_write(sc, RT3070_LDO_CFG0, tmp); } else if (sc->mac_ver == 0x3071) { run_rt3070_rf_read(sc, 6, &rf); run_rt3070_rf_write(sc, 6, rf | 0x40); run_rt3070_rf_write(sc, 31, 0x14); run_read(sc, RT3070_LDO_CFG0, &tmp); tmp &= ~0x1f000000; if (sc->mac_rev < 0x0211) tmp |= 0x0d000000; /* 1.3V */ else tmp |= 0x01000000; /* 1.2V */ run_write(sc, RT3070_LDO_CFG0, tmp); /* patch LNA_PE_G1 */ run_read(sc, RT3070_GPIO_SWITCH, &tmp); run_write(sc, RT3070_GPIO_SWITCH, tmp & ~0x20); } else if (sc->mac_ver == 0x3572) { run_rt3070_rf_read(sc, 6, &rf); run_rt3070_rf_write(sc, 6, rf | 0x40); /* increase voltage from 1.2V to 1.35V */ run_read(sc, RT3070_LDO_CFG0, &tmp); tmp = (tmp & ~0x1f000000) | 0x0d000000; run_write(sc, RT3070_LDO_CFG0, tmp); if (sc->mac_rev < 0x0211 || !sc->patch_dac) { run_delay(sc, 1); /* wait for 1msec */ /* decrease voltage back to 1.2V */ tmp = (tmp & ~0x1f000000) | 0x01000000; run_write(sc, RT3070_LDO_CFG0, tmp); } } /* select 20MHz bandwidth */ run_rt3070_rf_read(sc, 31, &rf); run_rt3070_rf_write(sc, 31, rf & ~0x20); /* calibrate filter for 20MHz bandwidth */ sc->rf24_20mhz = 0x1f; /* default value */ target = (sc->mac_ver < 0x3071) ? 0x16 : 0x13; run_rt3070_filter_calib(sc, 0x07, target, &sc->rf24_20mhz); /* select 40MHz bandwidth */ run_bbp_read(sc, 4, &bbp4); run_bbp_write(sc, 4, (bbp4 & ~0x08) | 0x10); run_rt3070_rf_read(sc, 31, &rf); run_rt3070_rf_write(sc, 31, rf | 0x20); /* calibrate filter for 40MHz bandwidth */ sc->rf24_40mhz = 0x2f; /* default value */ target = (sc->mac_ver < 0x3071) ? 0x19 : 0x15; run_rt3070_filter_calib(sc, 0x27, target, &sc->rf24_40mhz); /* go back to 20MHz bandwidth */ run_bbp_read(sc, 4, &bbp4); run_bbp_write(sc, 4, bbp4 & ~0x18); if (sc->mac_ver == 0x3572) { /* save default BBP registers 25 and 26 values */ run_bbp_read(sc, 25, &sc->bbp25); run_bbp_read(sc, 26, &sc->bbp26); } else if (sc->mac_rev < 0x0211) run_rt3070_rf_write(sc, 27, 0x03); run_read(sc, RT3070_OPT_14, &tmp); run_write(sc, RT3070_OPT_14, tmp | 1); if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) { run_rt3070_rf_read(sc, 17, &rf); rf &= ~RT3070_TX_LO1; if ((sc->mac_ver == 0x3070 || (sc->mac_ver == 0x3071 && sc->mac_rev >= 0x0211)) && !sc->ext_2ghz_lna) rf |= 0x20; /* fix for long range Rx issue */ if (sc->txmixgain_2ghz >= 1) rf = (rf & ~0x7) | sc->txmixgain_2ghz; run_rt3070_rf_write(sc, 17, rf); } if (sc->mac_rev == 0x3071) { run_rt3070_rf_read(sc, 1, &rf); rf &= ~(RT3070_RX0_PD | RT3070_TX0_PD); rf |= RT3070_RF_BLOCK | RT3070_RX1_PD | RT3070_TX1_PD; run_rt3070_rf_write(sc, 1, rf); run_rt3070_rf_read(sc, 15, &rf); run_rt3070_rf_write(sc, 15, rf & ~RT3070_TX_LO2); run_rt3070_rf_read(sc, 20, &rf); run_rt3070_rf_write(sc, 20, rf & ~RT3070_RX_LO1); run_rt3070_rf_read(sc, 21, &rf); run_rt3070_rf_write(sc, 21, rf & ~RT3070_RX_LO2); } if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) { /* fix Tx to Rx IQ glitch by raising RF voltage */ run_rt3070_rf_read(sc, 27, &rf); rf &= ~0x77; if (sc->mac_rev < 0x0211) rf |= 0x03; run_rt3070_rf_write(sc, 27, rf); } return (0); } static int run_rt3070_filter_calib(struct run_softc *sc, uint8_t init, uint8_t target, uint8_t *val) { uint8_t rf22, rf24; uint8_t bbp55_pb, bbp55_sb, delta; int ntries; /* program filter */ run_rt3070_rf_read(sc, 24, &rf24); rf24 = (rf24 & 0xc0) | init; /* initial filter value */ run_rt3070_rf_write(sc, 24, rf24); /* enable baseband loopback mode */ run_rt3070_rf_read(sc, 22, &rf22); run_rt3070_rf_write(sc, 22, rf22 | 0x01); /* set power and frequency of passband test tone */ run_bbp_write(sc, 24, 0x00); for (ntries = 0; ntries < 100; ntries++) { /* transmit test tone */ run_bbp_write(sc, 25, 0x90); run_delay(sc, 10); /* read received power */ run_bbp_read(sc, 55, &bbp55_pb); if (bbp55_pb != 0) break; } if (ntries == 100) return ETIMEDOUT; /* set power and frequency of stopband test tone */ run_bbp_write(sc, 24, 0x06); for (ntries = 0; ntries < 100; ntries++) { /* transmit test tone */ run_bbp_write(sc, 25, 0x90); run_delay(sc, 10); /* read received power */ run_bbp_read(sc, 55, &bbp55_sb); delta = bbp55_pb - bbp55_sb; if (delta > target) break; /* reprogram filter */ rf24++; run_rt3070_rf_write(sc, 24, rf24); } if (ntries < 100) { if (rf24 != init) rf24--; /* backtrack */ *val = rf24; run_rt3070_rf_write(sc, 24, rf24); } /* restore initial state */ run_bbp_write(sc, 24, 0x00); /* disable baseband loopback mode */ run_rt3070_rf_read(sc, 22, &rf22); run_rt3070_rf_write(sc, 22, rf22 & ~0x01); return (0); } static void run_rt3070_rf_setup(struct run_softc *sc) { uint8_t bbp, rf; int i; if (sc->mac_ver == 0x3572) { /* enable DC filter */ if (sc->mac_rev >= 0x0201) run_bbp_write(sc, 103, 0xc0); run_bbp_read(sc, 138, &bbp); if (sc->ntxchains == 1) bbp |= 0x20; /* turn off DAC1 */ if (sc->nrxchains == 1) bbp &= ~0x02; /* turn off ADC1 */ run_bbp_write(sc, 138, bbp); if (sc->mac_rev >= 0x0211) { /* improve power consumption */ run_bbp_read(sc, 31, &bbp); run_bbp_write(sc, 31, bbp & ~0x03); } run_rt3070_rf_read(sc, 16, &rf); rf = (rf & ~0x07) | sc->txmixgain_2ghz; run_rt3070_rf_write(sc, 16, rf); } else if (sc->mac_ver == 0x3071) { /* enable DC filter */ if (sc->mac_rev >= 0x0201) run_bbp_write(sc, 103, 0xc0); run_bbp_read(sc, 138, &bbp); if (sc->ntxchains == 1) bbp |= 0x20; /* turn off DAC1 */ if (sc->nrxchains == 1) bbp &= ~0x02; /* turn off ADC1 */ run_bbp_write(sc, 138, bbp); if (sc->mac_rev >= 0x0211) { /* improve power consumption */ run_bbp_read(sc, 31, &bbp); run_bbp_write(sc, 31, bbp & ~0x03); } run_write(sc, RT2860_TX_SW_CFG1, 0); if (sc->mac_rev < 0x0211) { run_write(sc, RT2860_TX_SW_CFG2, sc->patch_dac ? 0x2c : 0x0f); } else run_write(sc, RT2860_TX_SW_CFG2, 0); } else if (sc->mac_ver == 0x3070) { if (sc->mac_rev >= 0x0201) { /* enable DC filter */ run_bbp_write(sc, 103, 0xc0); /* improve power consumption */ run_bbp_read(sc, 31, &bbp); run_bbp_write(sc, 31, bbp & ~0x03); } if (sc->mac_rev < 0x0211) { run_write(sc, RT2860_TX_SW_CFG1, 0); run_write(sc, RT2860_TX_SW_CFG2, 0x2c); } else run_write(sc, RT2860_TX_SW_CFG2, 0); } /* initialize RF registers from ROM for >=RT3071*/ if (sc->mac_ver >= 0x3071) { for (i = 0; i < 10; i++) { if (sc->rf[i].reg == 0 || sc->rf[i].reg == 0xff) continue; run_rt3070_rf_write(sc, sc->rf[i].reg, sc->rf[i].val); } } } static int run_txrx_enable(struct run_softc *sc) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; uint32_t tmp; int error, ntries; run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN); for (ntries = 0; ntries < 200; ntries++) { if ((error = run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp)) != 0) return error; if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) break; run_delay(sc, 50); } if (ntries == 200) return ETIMEDOUT; run_delay(sc, 50); tmp |= RT2860_RX_DMA_EN | RT2860_TX_DMA_EN | RT2860_TX_WB_DDONE; run_write(sc, RT2860_WPDMA_GLO_CFG, tmp); /* enable Rx bulk aggregation (set timeout and limit) */ tmp = RT2860_USB_TX_EN | RT2860_USB_RX_EN | RT2860_USB_RX_AGG_EN | RT2860_USB_RX_AGG_TO(128) | RT2860_USB_RX_AGG_LMT(2); run_write(sc, RT2860_USB_DMA_CFG, tmp); /* set Rx filter */ tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR; if (ic->ic_opmode != IEEE80211_M_MONITOR) { tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL | RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK | RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV | RT2860_DROP_CFACK | RT2860_DROP_CFEND; if (ic->ic_opmode == IEEE80211_M_STA) tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL; } run_write(sc, RT2860_RX_FILTR_CFG, tmp); run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); return (0); } static void run_init_locked(struct run_softc *sc) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; uint32_t tmp; uint8_t bbp1, bbp3; int i; int ridx; int ntries; if (ic->ic_nrunning > 1) return; run_stop(sc); if (run_load_microcode(sc) != 0) { device_printf(sc->sc_dev, "could not load 8051 microcode\n"); goto fail; } for (ntries = 0; ntries < 100; ntries++) { if (run_read(sc, RT2860_ASIC_VER_ID, &tmp) != 0) goto fail; if (tmp != 0 && tmp != 0xffffffff) break; run_delay(sc, 10); } if (ntries == 100) goto fail; for (i = 0; i != RUN_EP_QUEUES; i++) run_setup_tx_list(sc, &sc->sc_epq[i]); run_set_macaddr(sc, IF_LLADDR(ifp)); for (ntries = 0; ntries < 100; ntries++) { if (run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp) != 0) goto fail; if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) break; run_delay(sc, 10); } if (ntries == 100) { device_printf(sc->sc_dev, "timeout waiting for DMA engine\n"); goto fail; } tmp &= 0xff0; tmp |= RT2860_TX_WB_DDONE; run_write(sc, RT2860_WPDMA_GLO_CFG, tmp); /* turn off PME_OEN to solve high-current issue */ run_read(sc, RT2860_SYS_CTRL, &tmp); run_write(sc, RT2860_SYS_CTRL, tmp & ~RT2860_PME_OEN); run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST); run_write(sc, RT2860_USB_DMA_CFG, 0); if (run_reset(sc) != 0) { device_printf(sc->sc_dev, "could not reset chipset\n"); goto fail; } run_write(sc, RT2860_MAC_SYS_CTRL, 0); /* init Tx power for all Tx rates (from EEPROM) */ for (ridx = 0; ridx < 5; ridx++) { if (sc->txpow20mhz[ridx] == 0xffffffff) continue; run_write(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]); } for (i = 0; i < N(rt2870_def_mac); i++) run_write(sc, rt2870_def_mac[i].reg, rt2870_def_mac[i].val); run_write(sc, RT2860_WMM_AIFSN_CFG, 0x00002273); run_write(sc, RT2860_WMM_CWMIN_CFG, 0x00002344); run_write(sc, RT2860_WMM_CWMAX_CFG, 0x000034aa); if (sc->mac_ver >= 0x3070) { /* set delay of PA_PE assertion to 1us (unit of 0.25us) */ run_write(sc, RT2860_TX_SW_CFG0, 4 << RT2860_DLY_PAPE_EN_SHIFT); } /* wait while MAC is busy */ for (ntries = 0; ntries < 100; ntries++) { if (run_read(sc, RT2860_MAC_STATUS_REG, &tmp) != 0) goto fail; if (!(tmp & (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY))) break; run_delay(sc, 10); } if (ntries == 100) goto fail; /* clear Host to MCU mailbox */ run_write(sc, RT2860_H2M_BBPAGENT, 0); run_write(sc, RT2860_H2M_MAILBOX, 0); run_delay(sc, 10); if (run_bbp_init(sc) != 0) { device_printf(sc->sc_dev, "could not initialize BBP\n"); goto fail; } /* abort TSF synchronization */ run_read(sc, RT2860_BCN_TIME_CFG, &tmp); tmp &= ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN); run_write(sc, RT2860_BCN_TIME_CFG, tmp); /* clear RX WCID search table */ run_set_region_4(sc, RT2860_WCID_ENTRY(0), 0, 512); /* clear WCID attribute table */ run_set_region_4(sc, RT2860_WCID_ATTR(0), 0, 8 * 32); /* hostapd sets a key before init. So, don't clear it. */ if (sc->cmdq_key_set != RUN_CMDQ_GO) { /* clear shared key table */ run_set_region_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32); /* clear shared key mode */ run_set_region_4(sc, RT2860_SKEY_MODE_0_7, 0, 4); } run_read(sc, RT2860_US_CYC_CNT, &tmp); tmp = (tmp & ~0xff) | 0x1e; run_write(sc, RT2860_US_CYC_CNT, tmp); if (sc->mac_rev != 0x0101) run_write(sc, RT2860_TXOP_CTRL_CFG, 0x0000583f); run_write(sc, RT2860_WMM_TXOP0_CFG, 0); run_write(sc, RT2860_WMM_TXOP1_CFG, 48 << 16 | 96); /* write vendor-specific BBP values (from EEPROM) */ for (i = 0; i < 10; i++) { if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff) continue; run_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val); } /* select Main antenna for 1T1R devices */ if (sc->rf_rev == RT3070_RF_3020) run_set_rx_antenna(sc, 0); /* send LEDs operating mode to microcontroller */ (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0]); (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1]); (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2]); if (sc->mac_ver >= 0x3070) run_rt3070_rf_init(sc); /* disable non-existing Rx chains */ run_bbp_read(sc, 3, &bbp3); bbp3 &= ~(1 << 3 | 1 << 4); if (sc->nrxchains == 2) bbp3 |= 1 << 3; else if (sc->nrxchains == 3) bbp3 |= 1 << 4; run_bbp_write(sc, 3, bbp3); /* disable non-existing Tx chains */ run_bbp_read(sc, 1, &bbp1); if (sc->ntxchains == 1) bbp1 &= ~(1 << 3 | 1 << 4); run_bbp_write(sc, 1, bbp1); if (sc->mac_ver >= 0x3070) run_rt3070_rf_setup(sc); /* select default channel */ run_set_chan(sc, ic->ic_curchan); /* setup initial protection mode */ run_updateprot_cb(ic); /* turn radio LED on */ run_set_leds(sc, RT2860_LED_RADIO); ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; ifp->if_drv_flags |= IFF_DRV_RUNNING; sc->cmdq_run = RUN_CMDQ_GO; for (i = 0; i != RUN_N_XFER; i++) usbd_xfer_set_stall(sc->sc_xfer[i]); usbd_transfer_start(sc->sc_xfer[RUN_BULK_RX]); if (run_txrx_enable(sc) != 0) goto fail; return; fail: run_stop(sc); } static void run_init(void *arg) { struct run_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; RUN_LOCK(sc); run_init_locked(sc); RUN_UNLOCK(sc); if (ifp->if_drv_flags & IFF_DRV_RUNNING) ieee80211_start_all(ic); } static void run_stop(void *arg) { struct run_softc *sc = (struct run_softc *)arg; struct ifnet *ifp = sc->sc_ifp; uint32_t tmp; int i; int ntries; RUN_LOCK_ASSERT(sc, MA_OWNED); if (ifp->if_drv_flags & IFF_DRV_RUNNING) run_set_leds(sc, 0); /* turn all LEDs off */ ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); sc->ratectl_run = RUN_RATECTL_OFF; sc->cmdq_run = sc->cmdq_key_set; RUN_UNLOCK(sc); for(i = 0; i < RUN_N_XFER; i++) usbd_transfer_drain(sc->sc_xfer[i]); RUN_LOCK(sc); if (sc->rx_m != NULL) { m_free(sc->rx_m); sc->rx_m = NULL; } /* disable Tx/Rx */ run_read(sc, RT2860_MAC_SYS_CTRL, &tmp); tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); run_write(sc, RT2860_MAC_SYS_CTRL, tmp); /* wait for pending Tx to complete */ for (ntries = 0; ntries < 100; ntries++) { if (run_read(sc, RT2860_TXRXQ_PCNT, &tmp) != 0) { DPRINTF("Cannot read Tx queue count\n"); break; } if ((tmp & RT2860_TX2Q_PCNT_MASK) == 0) { DPRINTF("All Tx cleared\n"); break; } run_delay(sc, 10); } if (ntries >= 100) DPRINTF("There are still pending Tx\n"); run_delay(sc, 10); run_write(sc, RT2860_USB_DMA_CFG, 0); run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST); run_write(sc, RT2860_MAC_SYS_CTRL, 0); for (i = 0; i != RUN_EP_QUEUES; i++) run_unsetup_tx_list(sc, &sc->sc_epq[i]); return; } static void run_delay(struct run_softc *sc, unsigned int ms) { usb_pause_mtx(mtx_owned(&sc->sc_mtx) ? &sc->sc_mtx : NULL, USB_MS_TO_TICKS(ms)); } static device_method_t run_methods[] = { /* Device interface */ DEVMETHOD(device_probe, run_match), DEVMETHOD(device_attach, run_attach), DEVMETHOD(device_detach, run_detach), { 0, 0 } }; static driver_t run_driver = { .name = "run", .methods = run_methods, .size = sizeof(struct run_softc) }; static devclass_t run_devclass; DRIVER_MODULE(run, uhub, run_driver, run_devclass, NULL, 0); MODULE_DEPEND(run, wlan, 1, 1, 1); MODULE_DEPEND(run, usb, 1, 1, 1); MODULE_DEPEND(run, firmware, 1, 1, 1); MODULE_VERSION(run, 1);