freebsd-skq/sys/conf/ldscript.riscv
arichardson 97544b17be Set the LMA of the riscv kernel to the OpenSBI jump target by default
This allows us to boot FreeBSD RISCV on QEMU using the -kernel command line
options. When using that option, QEMU maps the kernel ELF file to the
addresses specified in the LMAs in the program headers.

Since version 4.2 QEMU ships with OpenSBI fw_jump by default so this allows
booting FreeBSD using the following command line:
qemu-system-riscv64 -bios default -kernel /.../boot/kernel/kernel -nographic -M virt

Without this change the -kernel option cannot be used since the LMAs start
at address zero and QEMU already maps a ROM to these low physical addresses.

For targets that require a different kernel LMA the make variable
KERNEL_LMA can be overwritten in the config file. For example, adding
`makeoptions	KERNEL_LMA=0xc0200000` will create an ELF file that will be
loaded at 0xc0200000.

Before:
There are 4 program headers, starting at offset 64

Program Headers:
  Type           Offset   VirtAddr           PhysAddr           FileSiz  MemSiz   Flg Align
  LOAD           0x001000 0xffffffc000000000 0x0000000000000000 0x75e598 0x8be318 RWE 0x1000
  DYNAMIC        0x71fb20 0xffffffc00071eb20 0x000000000071eb20 0x000100 0x000100 RW  0x8
  GNU_STACK      0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW  0x0
  NOTE           0x693400 0xffffffc000692400 0x0000000000692400 0x000024 0x000024 R   0x4

After:

There are 4 program headers, starting at offset 64

Program Headers:
  Type           Offset   VirtAddr           PhysAddr           FileSiz  MemSiz   Flg Align
  LOAD           0x001000 0xffffffc000000000 0x0000000080200000 0x734198 0x893e18 RWE 0x1000
  DYNAMIC        0x6f7810 0xffffffc0006f6810 0x00000000808f6810 0x000100 0x000100 RW  0x8
  GNU_STACK      0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW  0x0
  NOTE           0x66ca70 0xffffffc00066ba70 0x000000008086ba70 0x000024 0x000024 R   0x4

Reviewed By:	br, mhorne (earlier version)
Differential Revision: https://reviews.freebsd.org/D23436
2020-02-04 00:06:16 +00:00

150 lines
4.4 KiB
Plaintext

/* $FreeBSD$ */
OUTPUT_ARCH(riscv)
ENTRY(_start)
SEARCH_DIR(/usr/lib);
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = kernbase;
/* The load address kernel_lma is set using --defsym= on the command line. */
.text : AT(kernel_lma)
{
*(.text)
*(.stub)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
*(.gnu.linkonce.t*)
} =0x9090
_etext = .;
PROVIDE (etext = .);
.fini : { *(.fini) } =0x9090
.rodata : { *(.rodata) *(.gnu.linkonce.r*) }
.rodata1 : { *(.rodata1) }
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.gnu.version : { *(.gnu.version) }
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
.note.gnu.build-id : {
PROVIDE (__build_id_start = .);
*(.note.gnu.build-id)
PROVIDE (__build_id_end = .);
}
.rel.text :
{ *(.rel.text) *(.rel.gnu.linkonce.t*) }
.rela.text :
{ *(.rela.text) *(.rela.gnu.linkonce.t*) }
.rel.data :
{ *(.rel.data) *(.rel.gnu.linkonce.d*) }
.rela.data :
{ *(.rela.data) *(.rela.gnu.linkonce.d*) }
.rel.rodata :
{ *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
.rela.rodata :
{ *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.init : { *(.rel.init) }
.rela.init : { *(.rela.init) }
.rel.fini : { *(.rel.fini) }
.rela.fini : { *(.rela.fini) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) } =0x9090
.plt : { *(.plt) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
. = ALIGN(0x1000) + (. & (0x1000 - 1)) ;
.data :
{
*(.data)
*(.gnu.linkonce.d*)
}
.data1 : { *(.data1) }
. = ALIGN(32 / 8);
_start_ctors = .;
PROVIDE (start_ctors = .);
.ctors :
{
*(.ctors)
}
_stop_ctors = .;
PROVIDE (stop_ctors = .);
.dtors :
{
*(.dtors)
}
.got : { *(.got.plt) *(.got) }
.dynamic : { *(.dynamic) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
. = ALIGN(8);
.sdata :
{
__global_pointer$ = . + 0x800;
*(.sdata)
}
_edata = .;
PROVIDE (edata = .);
/* Ensure __bss_start is associated with the next section in case orphan
sections are placed directly after .sdata, as has been seen to happen with
LLD. */
. = ALIGN(8);
__bss_start = .;
.sbss : { *(.sbss) *(.scommon) }
.bss :
{
*(.dynbss)
*(.bss)
*(COMMON)
}
. = ALIGN(8);
_end = . ;
PROVIDE (end = .);
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/* These must appear regardless of . */
}