56248d9da8
make use of it where possible. This primarily brings in support for newer hardware, and FreeBSD is not yet able to support the abundance of IRQs on new hardware and many features in the Ethernet driver. Because of the changes to IRQs in the Simple Executive, we have to maintain our own list of Octeon IRQs now, which probably can be pared-down and be specific to the CIU interrupt unit soon, and when other interrupt mechanisms are added they can maintain their own definitions. Remove unmasking of interrupts from within the UART device now that the function used is no longer present in the Simple Executive. The unmasking seems to have been gratuitous as this is more properly handled by the buses above the UART device, and seems to work on that basis.
198 lines
7.7 KiB
Plaintext
198 lines
7.7 KiB
Plaintext
/***********************license start***************
|
|
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
|
|
* * Neither the name of Cavium Inc. nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
|
|
* This Software, including technical data, may be subject to U.S. export control
|
|
* laws, including the U.S. Export Administration Act and its associated
|
|
* regulations, and may be subject to export or import regulations in other
|
|
* countries.
|
|
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
|
|
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
|
|
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
|
|
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
|
|
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
|
|
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
|
|
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
|
|
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
|
|
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
* File version info: $Id: cvmx-resources.config 70030 2012-02-16 04:23:43Z cchavva $
|
|
*
|
|
*/
|
|
#ifndef __CVMX_RESOURCES_CONFIG__
|
|
#define __CVMX_RESOURCES_CONFIG__
|
|
|
|
|
|
#if (CVMX_HELPER_FIRST_MBUFF_SKIP > 256)
|
|
#error CVMX_HELPER_FIRST_MBUFF_SKIP is greater than the maximum of 256
|
|
#endif
|
|
|
|
#if (CVMX_HELPER_NOT_FIRST_MBUFF_SKIP > 256)
|
|
#error CVMX_HELPER_NOT_FIRST_MBUFF_SKIP is greater than the maximum of 256
|
|
#endif
|
|
|
|
|
|
/* Content below this point is only used by the cvmx-config tool, and is
|
|
** not used by any C files as CAVIUM_COMPONENT_REQUIREMENT is never
|
|
defined.
|
|
*/
|
|
#ifdef CAVIUM_COMPONENT_REQUIREMENT
|
|
/* Define the number of LLM ports (interfaces), can be 1 or 2 */
|
|
cvmxconfig
|
|
{
|
|
#if CVMX_LLM_CONFIG_NUM_PORTS == 2
|
|
define CVMX_LLM_NUM_PORTS value = 2;
|
|
#else
|
|
define CVMX_LLM_NUM_PORTS value = 1;
|
|
#endif
|
|
}
|
|
/* Control the setting of Null pointer detection, default to enabled */
|
|
cvmxconfig {
|
|
#ifdef CVMX_CONFIG_NULL_POINTER_PROTECT
|
|
define CVMX_NULL_POINTER_PROTECT value = CVMX_CONFIG_NULL_POINTER_PROTECT;
|
|
#else
|
|
define CVMX_NULL_POINTER_PROTECT value = 1;
|
|
#endif
|
|
}
|
|
/* Control Debug prints, default to enabled */
|
|
cvmxconfig {
|
|
#ifdef CVMX_CONFIG_ENABLE_DEBUG_PRINTS
|
|
define CVMX_ENABLE_DEBUG_PRINTS value = CVMX_CONFIG_ENABLE_DEBUG_PRINTS;
|
|
#else
|
|
define CVMX_ENABLE_DEBUG_PRINTS value = 1;
|
|
#endif
|
|
}
|
|
|
|
/* Define CVMX_ENABLE_DFA_FUNCTIONS to allocate resources for the DFA functions */
|
|
#ifdef CVMX_ENABLE_DFA_FUNCTIONS
|
|
cvmxconfig
|
|
{
|
|
fpa CVMX_FPA_DFA_POOL
|
|
size = 2
|
|
protected = 1
|
|
description = "DFA command buffers";
|
|
fau CVMX_FAU_DFA_STATE
|
|
size = 8
|
|
count = 1
|
|
description = "FAU registers for the state of the DFA command queue";
|
|
}
|
|
#endif
|
|
|
|
/* Define CVMX_ENABLE_PKO_FUNCTIONS to allocate resources for the PKO functions */
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
cvmxconfig
|
|
{
|
|
define CVMX_PKO_QUEUES_PER_PORT_INTERFACE0
|
|
value = CVMX_HELPER_PKO_QUEUES_PER_PORT_INTERFACE0
|
|
description = "PKO queues per port for interface 0 (ports 0-15)";
|
|
define CVMX_PKO_QUEUES_PER_PORT_INTERFACE1
|
|
value = CVMX_HELPER_PKO_QUEUES_PER_PORT_INTERFACE1
|
|
description = "PKO queues per port for interface 1 (ports 16-31)";
|
|
define CVMX_PKO_QUEUES_PER_PORT_INTERFACE2
|
|
value = CVMX_HELPER_PKO_QUEUES_PER_PORT_INTERFACE2
|
|
description = "PKO queues per port for interface 2";
|
|
define CVMX_PKO_QUEUES_PER_PORT_INTERFACE3
|
|
value = CVMX_HELPER_PKO_QUEUES_PER_PORT_INTERFACE3
|
|
description = "PKO queues per port for interface 3";
|
|
define CVMX_PKO_QUEUES_PER_PORT_INTERFACE4
|
|
value = CVMX_HELPER_PKO_QUEUES_PER_PORT_INTERFACE4
|
|
description = "PKO queues per port for interface 4";
|
|
define CVMX_PKO_MAX_PORTS_INTERFACE0
|
|
value = CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0
|
|
description = "Limit on the number of PKO ports enabled for interface 0";
|
|
define CVMX_PKO_MAX_PORTS_INTERFACE1
|
|
value = CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1
|
|
description = "Limit on the number of PKO ports enabled for interface 1";
|
|
define CVMX_PKO_QUEUES_PER_PORT_PCI
|
|
value = 1
|
|
description = "PKO queues per port for PCI (ports 32-35)";
|
|
define CVMX_PKO_QUEUES_PER_PORT_LOOP
|
|
value = 1
|
|
description = "PKO queues per port for Loop devices (ports 36-39)";
|
|
/* We use two queues per port for SRIO0. Having two queues per
|
|
port with two ports gives us four queues, one for each mailbox */
|
|
define CVMX_PKO_QUEUES_PER_PORT_SRIO0
|
|
value = 2
|
|
description = "PKO queues per port for SRIO0 devices (ports 40-41)";
|
|
/* We use two queues per port for SRIO1. Having two queues per
|
|
port with two ports gives us four queues, one for each mailbox */
|
|
define CVMX_PKO_QUEUES_PER_PORT_SRIO1
|
|
value = 2
|
|
description = "PKO queues per port for SRIO1 devices (ports 42-43)";
|
|
/* Set the IPD cache mode, select from cvmx_ipd_mode_t. */
|
|
define CVMX_IPD_DRAM_MODE
|
|
value = CVMX_HELPER_IPD_DRAM_MODE
|
|
description = "set the IPD cache mode to CVMX_IPD_OPC_MODE_STT";
|
|
fpa CVMX_FPA_PACKET_POOL
|
|
pool = 0
|
|
size = 16
|
|
priority = 1
|
|
protected = 1
|
|
description = "Packet buffers";
|
|
fpa CVMX_FPA_OUTPUT_BUFFER_POOL
|
|
size = 8
|
|
protected = 1
|
|
description = "PKO queue command buffers";
|
|
scratch CVMX_SCR_SCRATCH
|
|
size = 8
|
|
iobdma = true
|
|
permanent = false
|
|
description = "Generic scratch iobdma area";
|
|
}
|
|
#endif
|
|
|
|
/* Define CVMX_ENABLE_HELPER_FUNCTIONS to allocate resources for the helper functions */
|
|
#ifdef CVMX_ENABLE_HELPER_FUNCTIONS
|
|
cvmxconfig
|
|
{
|
|
fpa CVMX_FPA_WQE_POOL
|
|
size = 1
|
|
priority = 1
|
|
protected = 1
|
|
description = "Work queue entrys";
|
|
}
|
|
#endif
|
|
|
|
/* Define CVMX_ENABLE_TIMER_FUNCTIONS to allocate resources for the timer functions */
|
|
#ifdef CVMX_ENABLE_TIMER_FUNCTIONS
|
|
cvmxconfig
|
|
{
|
|
fpa CVMX_FPA_TIMER_POOL
|
|
size = 8
|
|
protected = 1
|
|
description = "TIM command buffers";
|
|
}
|
|
#endif
|
|
|
|
#endif
|
|
|
|
|
|
#endif /* __CVMX_RESOURCES_CONFIG__ */
|