88597370a0
1) _x=$((_x + 1)) does not work while x=$((x + 1)) does.
2) Parameter Expansion, esp. "${x%%bar}" does not work if quoted.
Correct typos and improve some details forwarding.sh already
had in initiator, esp. related to ipfw accepting if the default
is deny.
Add an extra stat call to the "delay" function in addition to the
touch which together is still a lot faster than sleep 1 but seems
to help a lot more to mitigate the unrelated kernel race seen.
Sponsored by: Cisco Systems, Inc.
65 lines
2.6 KiB
Plaintext
65 lines
2.6 KiB
Plaintext
# $FreeBSD$
|
|
|
|
This directory holds scripts and a support program for multiple test cases
|
|
exercising multi-IP FIBs. At this time only IPv6 test cases are provided.
|
|
|
|
Makefile
|
|
reflect.c
|
|
|
|
Makefile just builds reflect, a program to echo data on a TCP or UDP
|
|
socket in very simplistic ways. It has a couple of options to provide
|
|
an address or port, a FIB to bind to or a FIB to add to a reflected
|
|
message as well as some "magic" keyword handling to let the intiators
|
|
control it.
|
|
|
|
initiator.sh and reflector.sh
|
|
|
|
intiator.sh runs two local test cases, one which shows a documented
|
|
limitation.
|
|
|
|
All further tests are either exercising the sending or receiving of
|
|
ICMP6, TCP or UDP packets with multiple FIBs. initiator.sh and
|
|
reflector.sh must run on two different nodes both having a network
|
|
interface in the same broadcast domain (be it cross-over or on a
|
|
bridge/switch). The tests will use the IPv6 benchmarking working
|
|
group (BMWG) prefix. The prefix is hard coded into some tests.
|
|
Control messages will synchronize reflector with initiator. The
|
|
reflector needs the reflect binary. Apart from that the scripts
|
|
depend on ping6, netcat, awk, tr and ipfw. The interface to use can
|
|
be set from the environment. The commands can be run like:
|
|
|
|
env IFACE=ifname sh intiator.sh
|
|
env IFACE=ifname sh reflector.sh
|
|
|
|
Both scripts also support a DEBUG environment variable for additional
|
|
output. A special value of 42 will enable sh(1) xtrace printing.
|
|
|
|
The output format is modeled after Test::Harness Perl as used in
|
|
tools/regression/ but not always compliant following the test case name.
|
|
|
|
NOTE: at the time of writing reflector.sh can trigger kernel races
|
|
unrelated to multi-FIB test leading to a panic(9). "delay" calls
|
|
are used to mitigate the problem some but are not always good enough.
|
|
It is suggested to run one test case at a time manually disabling
|
|
the others in both scripts.
|
|
|
|
forwarding.sh
|
|
|
|
forwarding.sh tests FIBs in the forwarding path, making sure that
|
|
packets tagged on input are leaving on the correct FIB.
|
|
The script must be run on three nodes with both edge nodes (left
|
|
and right) being connected to the middle node on separate interfaces.
|
|
|
|
The script operates on the same principles and requirements as the
|
|
two afore described ones. Environment options equally apply, with
|
|
the middle node also taking an IFACEFAR variable to name the interface
|
|
to the right. See the ASCII art at the beginning of the script for
|
|
details. The script needs to be told which node it is running with
|
|
the first argument:
|
|
|
|
env IFACE=ifname sh forwarding.sh left
|
|
env IFACE=leftifname IFACEFAR=rightifname sh forwarding.sh middle
|
|
env IFACE=ifname sh forwarding.sh right
|
|
|
|
# end
|