freebsd-skq/usr.bin/tip/libacu/biz31.c

/*	$OpenBSD: biz31.c,v 1.10 2006/03/17 19:17:13 moritz Exp $	*/
/*	$NetBSD: biz31.c,v 1.5 1997/02/11 09:24:14 mrg Exp $	*/

/*-
 * SPDX-License-Identifier: BSD-3-Clause
 *
 * Copyright (c) 1983, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#ifndef lint
#if 0
static char sccsid[] = "@(#)biz31.c	8.1 (Berkeley) 6/6/93";
static char rcsid[] = "$OpenBSD: biz31.c,v 1.10 2006/03/17 19:17:13 moritz Exp $";
#endif
#endif /* not lint */

#include "tip.h"

#define MAXRETRY	3		/* sync up retry count */
#define DISCONNECT_CMD	"\21\25\11\24"	/* disconnection string */

static int	biz_dialer(char *, char *);
static int	bizsync(int);
static int	echo(char *);
static void	sigALRM(int);
static int	detect(char *);
static int	flush(char *);
static int	bizsync(int);

static	int timeout = 0;
static	jmp_buf timeoutbuf;

/*
 * Dial up on a BIZCOMP Model 1031 with either
 * 	tone dialing (mod = "f")
 *	pulse dialing (mod = "w")
 */
static int
biz_dialer(char *num, char *mod)
{
	int connected = 0;

	if (!bizsync(FD)) {
		logent(value(HOST), "", "biz", "out of sync");
		printf("bizcomp out of sync\n");
		delock(uucplock);
		exit(0);
	}
	if (boolean(value(VERBOSE)))
		printf("\nstarting call...");
	echo("#\rk$\r$\n");			/* disable auto-answer */
	echo("$>$.$ #\r");			/* tone/pulse dialing */
	echo(mod);
	echo("$\r$\n");
	echo("$>$.$ #\re$ ");			/* disconnection sequence */
	echo(DISCONNECT_CMD);
	echo("\r$\n$\r$\n");
	echo("$>$.$ #\rr$ ");			/* repeat dial */
	echo(num);
	echo("\r$\n");
	if (boolean(value(VERBOSE)))
		printf("ringing...");
	/*
	 * The reply from the BIZCOMP should be:
	 *	`^G NO CONNECTION\r\n^G\r\n'	failure
	 *	` CONNECTION\r\n^G'		success
	 */
	connected = detect(" ");
#ifdef ACULOG
	if (timeout) {
		char line[80];

		(void)snprintf(line, sizeof line, "%ld second dial timeout",
			number(value(DIALTIMEOUT)));
		logent(value(HOST), num, "biz", line);
	}
#endif
	if (!connected)
		flush(" NO CONNECTION\r\n\07\r\n");
	else
		flush("CONNECTION\r\n\07");
	if (timeout)
		biz31_disconnect();	/* insurance */
	return (connected);
}

int
biz31w_dialer(char *num, char *acu)
{
	return (biz_dialer(num, "w"));
}

int
biz31f_dialer(char *num, char *acu)
{
	return (biz_dialer(num, "f"));
}

void
biz31_disconnect(void)
{
	write(FD, DISCONNECT_CMD, sizeof(DISCONNECT_CMD)-1);
	sleep(2);
	tcflush(FD, TCIOFLUSH);
}

void
biz31_abort(void)
{
	write(FD, "\33", 1);
}

static int
echo(char *s)
{
	char c;

	while (c = *s++) switch (c) {

	case '$':
		read(FD, &c, 1);
		s++;
		break;

	case '#':
		c = *s++;
		write(FD, &c, 1);
		break;

	default:
		write(FD, &c, 1);
		read(FD, &c, 1);
	}
}

/*ARGSUSED*/
static void
sigALRM(int signo)
{
	timeout = 1;
	longjmp(timeoutbuf, 1);
}

static int
detect(char *s)
{
	sig_t f;
	char c;

	f = signal(SIGALRM, sigALRM);
	timeout = 0;
	while (*s) {
		if (setjmp(timeoutbuf)) {
			printf("\07timeout waiting for reply\n");
			biz31_abort();
			break;
		}
		alarm(number(value(DIALTIMEOUT)));
		read(FD, &c, 1);
		alarm(0);
		if (c != *s++)
			break;
	}
	signal(SIGALRM, f);
	return (timeout == 0);
}

static int
flush(char *s)
{
	sig_t f;
	char c;

	f = signal(SIGALRM, sigALRM);
	while (*s++) {
		if (setjmp(timeoutbuf))
			break;
		alarm(10);
		read(FD, &c, 1);
		alarm(0);
	}
	signal(SIGALRM, f);
	timeout = 0;			/* guard against disconnection */
}

/*
 * This convoluted piece of code attempts to get
 *  the bizcomp in sync.  If you don't have the capacity or nread
 *  call there are gory ways to simulate this.
 */
static int
bizsync(int fd)
{
#ifdef FIOCAPACITY
	struct capacity b;
#	define chars(b)	((b).cp_nbytes)
#	define IOCTL	FIOCAPACITY
#endif
#ifdef FIONREAD
	long b;
#	define chars(b)	(b)
#	define IOCTL	FIONREAD
#endif
	int already = 0;
	char buf[10];

retry:
	if (ioctl(fd, IOCTL, (caddr_t)&b) >= 0 && chars(b) > 0)
		tcflush(FD, TCIOFLUSH);
	write(fd, "\rp>\r", 4);
	sleep(1);
	if (ioctl(fd, IOCTL, (caddr_t)&b) >= 0) {
		if (chars(b) != 10) {
	nono:
			if (already > MAXRETRY)
				return (0);
			write(fd, DISCONNECT_CMD, 4);
			sleep(2);
			already++;
			goto retry;
		} else {
			read(fd, buf, 10);
			if (strncmp(buf, "p >\r\n\r\n>", 8))
				goto nono;
		}
	}
	return (1);
}