John Baldwin 058e24d34b Extend the ACPI power management support to wire a virtual power button up ...

to SIGTERM when ACPI is enabled.  Sending SIGTERM to the hypervisor when an
ACPI-aware OS is running will now trigger a soft-off allowing for a graceful
shutdown of the guest.
- Move constants for ACPI-related registers to acpi.h.
- Implement an SMI_CMD register with commands to enable and disable ACPI.
  Currently the only change when ACPI is enabled is to enable the virtual
  power button via SIGTERM.
- Implement a fixed-feature power button when ACPI is enabled by asserting
  PWRBTN_STS in PM1_EVT when SIGTERM is received.
- Add support for EVFILT_SIGNAL events to mevent.
- Implement support for the ACPI system command interrupt (SCI) and assert
  it when needed based on the values in PM1_EVT.  Mark the SCI as active-low
  and level triggered in the MADT and MP Table.
- Mark PCI interrupts in the MP Table as active-low in addition to level
  triggered.

Reviewed by:	neel

2013-12-28 04:01:05 +00:00

..

acpi.c

Extend the ACPI power management support to wire a virtual power button up

2013-12-28 04:01:05 +00:00

acpi.h

Extend the ACPI power management support to wire a virtual power button up

2013-12-28 04:01:05 +00:00

ahci.h

Import Zhixiang Yu's GSoC'13 AHCI emulation:

2013-10-04 18:31:38 +00:00

atpic.c

Allow 8259 registers to be read. This is a transient condition

2013-06-28 06:25:04 +00:00

bhyve.8

mdoc: nuke whitespace.

2013-12-23 15:00:15 +00:00

bhyverun.c

Support soft power-off via the ACPI S5 state for bhyve guests.

2013-12-24 16:14:19 +00:00

bhyverun.h

Changes required for OpenBSD/amd64:

2013-10-17 22:01:17 +00:00

block_if.c

Add the VM name to the process name with setproctitle().

2013-11-06 00:25:17 +00:00

block_if.h

Block-layer backend interface for bhyve block-io device emulations.

2013-10-04 16:52:03 +00:00

consport.c

Improve PCI BAR emulation:

2013-04-10 02:12:39 +00:00

dbgport.c

Improve PCI BAR emulation:

2013-04-10 02:12:39 +00:00

dbgport.h

Change the behavior of bhyve such that the gdb listening port is opt-in

2013-10-08 16:36:17 +00:00

elcr.c

…

inout.c

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached

2013-10-29 00:18:11 +00:00

inout.h

Support soft power-off via the ACPI S5 state for bhyve guests.

2013-12-24 16:14:19 +00:00

legacy_irq.c

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached

2013-10-29 00:18:11 +00:00

legacy_irq.h

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached

2013-10-29 00:18:11 +00:00

Makefile

Support soft power-off via the ACPI S5 state for bhyve guests.

2013-12-24 16:14:19 +00:00

mem.c

Remove obsolete comment about lack of locking for MMIO range lookup.

2013-04-10 18:53:14 +00:00

mem.h

Improve PCI BAR emulation:

2013-04-10 02:12:39 +00:00

mevent_test.c

Add simplistic periodic timer support to mevent using kqueue's

2013-09-19 04:48:26 +00:00

mevent.c

Extend the ACPI power management support to wire a virtual power button up

2013-12-28 04:01:05 +00:00

mevent.h

Extend the ACPI power management support to wire a virtual power button up

2013-12-28 04:01:05 +00:00

mptbl.c

Extend the ACPI power management support to wire a virtual power button up

2013-12-28 04:01:05 +00:00

mptbl.h

Make the virtual ioapic available unconditionally in a bhyve virtual machine.

2013-10-31 05:44:45 +00:00

pci_ahci.c

The Data Byte Count (DBC) field of a Physical Region Descriptor

2013-11-26 03:00:54 +00:00

pci_emul.c

Add an API to deliver message signalled interrupts to vcpus. This allows

2013-12-16 19:59:31 +00:00

pci_emul.h

Add an API to deliver message signalled interrupts to vcpus. This allows

2013-12-16 19:59:31 +00:00

pci_hostbridge.c

Changes required for OpenBSD/amd64:

2013-10-17 22:01:17 +00:00

pci_lpc.c

Add an ioctl to assert and deassert an ioapic pin atomically. This will be used

2013-11-23 03:56:03 +00:00

pci_lpc.h

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached

2013-10-29 00:18:11 +00:00

pci_passthru.c

Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to

2013-12-18 03:58:51 +00:00

pci_uart.c

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached

2013-10-29 00:18:11 +00:00

pci_virtio_block.c

Export the block size capability to guests.

2013-10-23 18:54:58 +00:00

pci_virtio_net.c

Add the VM name to the process name with setproctitle().

2013-11-06 00:25:17 +00:00

pit_8254.c

Add an ioctl to assert and deassert an ioapic pin atomically. This will be used

2013-11-23 03:56:03 +00:00

pit_8254.h

…

pm.c

Extend the ACPI power management support to wire a virtual power button up

2013-12-28 04:01:05 +00:00

pmtmr.c

Extend the ACPI power management support to wire a virtual power button up

2013-12-28 04:01:05 +00:00

post.c

…

rtc.c

Changes required for OpenBSD/amd64:

2013-10-17 22:01:17 +00:00

rtc.h

Implement RTC CMOS nvram. Init some fields that are used

2013-07-11 03:54:35 +00:00

spinup_ap.c

Add a new capability, VM_CAP_ENABLE_INVPCID, that can be enabled to expose

2013-10-16 18:20:27 +00:00

spinup_ap.h

…

uart_emul.c

Allow bhyve and bhyveload to attach to tty devices.

2013-11-27 00:21:37 +00:00

uart_emul.h

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached

2013-10-29 00:18:11 +00:00

virtio.c

Pass the number of supported vectors to pci_emul_add_msicap() and

2013-09-17 18:42:13 +00:00

virtio.h

Major rework of the virtio code. Split out common parts, and modify

2013-07-17 23:37:33 +00:00

xmsr.c

Add an option to ignore accesses by the guest to unimplemented MSRs.

2013-12-19 22:27:28 +00:00

xmsr.h

Add an option to ignore accesses by the guest to unimplemented MSRs.

2013-12-19 22:27:28 +00:00