freebsd-skq/sys/arm/include/pl310.h
ian 9657c853ff Set the pl310 L2 cache driver to attach during the middle of BUS_PASS_CPU.
Because that's earlier than interrupts are available, set up deferred
configuration of interrupts (which are used only for debugging).
2014-08-05 17:39:58 +00:00

189 lines
6.5 KiB
C

/*-
* Copyright (c) 2012 Olivier Houchard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* $FreeBSD$
*/
#ifndef PL310_H_
#define PL310_H_
/**
* PL310 - L2 Cache Controller register offsets.
*
*/
#define PL310_CACHE_ID 0x000
#define CACHE_ID_RELEASE_SHIFT 0
#define CACHE_ID_RELEASE_MASK 0x3f
#define CACHE_ID_RELEASE_r0p0 0x00
#define CACHE_ID_RELEASE_r1p0 0x02
#define CACHE_ID_RELEASE_r2p0 0x04
#define CACHE_ID_RELEASE_r3p0 0x05
#define CACHE_ID_RELEASE_r3p1 0x06
#define CACHE_ID_RELEASE_r3p2 0x08
#define CACHE_ID_RELEASE_r3p3 0x09
#define CACHE_ID_PARTNUM_SHIFT 6
#define CACHE_ID_PARTNUM_MASK 0xf
#define CACHE_ID_PARTNUM_VALUE 0x3
#define PL310_CACHE_TYPE 0x004
#define PL310_CTRL 0x100
#define CTRL_ENABLED 0x01
#define CTRL_DISABLED 0x00
#define PL310_AUX_CTRL 0x104
#define AUX_CTRL_MASK 0xc0000fff
#define AUX_CTRL_ASSOCIATIVITY_SHIFT 16
#define AUX_CTRL_WAY_SIZE_SHIFT 17
#define AUX_CTRL_WAY_SIZE_MASK (0x7 << 17)
#define AUX_CTRL_SHARE_OVERRIDE (1 << 22)
#define AUX_CTRL_NS_LOCKDOWN (1 << 26)
#define AUX_CTRL_NS_INT_CTRL (1 << 27)
#define AUX_CTRL_DATA_PREFETCH (1 << 28)
#define AUX_CTRL_INSTR_PREFETCH (1 << 29)
#define AUX_CTRL_EARLY_BRESP (1 << 30)
#define PL310_TAG_RAM_CTRL 0x108
#define PL310_DATA_RAM_CTRL 0x10C
#define RAM_CTRL_WRITE_SHIFT 8
#define RAM_CTRL_WRITE_MASK (0x7 << 8)
#define RAM_CTRL_READ_SHIFT 4
#define RAM_CTRL_READ_MASK (0x7 << 4)
#define RAM_CTRL_SETUP_SHIFT 0
#define RAM_CTRL_SETUP_MASK (0x7 << 0)
#define PL310_EVENT_COUNTER_CTRL 0x200
#define EVENT_COUNTER_CTRL_ENABLED (1 << 0)
#define EVENT_COUNTER_CTRL_C0_RESET (1 << 1)
#define EVENT_COUNTER_CTRL_C1_RESET (1 << 2)
#define PL310_EVENT_COUNTER1_CONF 0x204
#define PL310_EVENT_COUNTER0_CONF 0x208
#define EVENT_COUNTER_CONF_NOINTR 0
#define EVENT_COUNTER_CONF_INCR 1
#define EVENT_COUNTER_CONF_OVFW 2
#define EVENT_COUNTER_CONF_NOEV (0 << 2)
#define EVENT_COUNTER_CONF_CO (1 << 2)
#define EVENT_COUNTER_CONF_DRHIT (2 << 2)
#define EVENT_COUNTER_CONF_DRREQ (3 << 2)
#define EVENT_COUNTER_CONF_DWHIT (4 << 2)
#define EVENT_COUNTER_CONF_DWREQ (5 << 2)
#define EVENT_COUNTER_CONF_DWTREQ (6 << 2)
#define EVENT_COUNTER_CONF_DIRHIT (7 << 2)
#define EVENT_COUNTER_CONF_DIRREQ (8 << 2)
#define EVENT_COUNTER_CONF_WA (9 << 2)
#define PL310_EVENT_COUNTER1_VAL 0x20C
#define PL310_EVENT_COUNTER0_VAL 0x210
#define PL310_INTR_MASK 0x214
#define PL310_MASKED_INTR_STAT 0x218
#define PL310_RAW_INTR_STAT 0x21C
#define PL310_INTR_CLEAR 0x220
#define INTR_MASK_ALL ((1 << 9) - 1)
#define INTR_MASK_ECNTR (1 << 0)
#define INTR_MASK_PARRT (1 << 1)
#define INTR_MASK_PARRD (1 << 2)
#define INTR_MASK_ERRWT (1 << 3)
#define INTR_MASK_ERRWD (1 << 4)
#define INTR_MASK_ERRRT (1 << 5)
#define INTR_MASK_ERRRD (1 << 6)
#define INTR_MASK_SLVERR (1 << 7)
#define INTR_MASK_DECERR (1 << 8)
#define PL310_CACHE_SYNC 0x730
#define PL310_INV_LINE_PA 0x770
#define PL310_INV_WAY 0x77C
#define PL310_CLEAN_LINE_PA 0x7B0
#define PL310_CLEAN_LINE_IDX 0x7B8
#define PL310_CLEAN_WAY 0x7BC
#define PL310_CLEAN_INV_LINE_PA 0x7F0
#define PL310_CLEAN_INV_LINE_IDX 0x7F8
#define PL310_CLEAN_INV_WAY 0x7FC
#define PL310_LOCKDOWN_D_WAY(x) (0x900 + ((x) * 8))
#define PL310_LOCKDOWN_I_WAY(x) (0x904 + ((x) * 8))
#define PL310_LOCKDOWN_LINE_ENABLE 0x950
#define PL310_UNLOCK_ALL_LINES_WAY 0x954
#define PL310_ADDR_FILTER_STAR 0xC00
#define PL310_ADDR_FILTER_END 0xC04
#define PL310_DEBUG_CTRL 0xF40
#define DEBUG_CTRL_DISABLE_LINEFILL (1 << 0)
#define DEBUG_CTRL_DISABLE_WRITEBACK (1 << 1)
#define DEBUG_CTRL_SPNIDEN (1 << 2)
#define PL310_PREFETCH_CTRL 0xF60
#define PREFETCH_CTRL_OFFSET_MASK (0x1f)
#define PREFETCH_CTRL_NOTSAMEID (1 << 21)
#define PREFETCH_CTRL_INCR_DL (1 << 23)
#define PREFETCH_CTRL_PREFETCH_DROP (1 << 24)
#define PREFETCH_CTRL_DL_ON_WRAP (1 << 27)
#define PREFETCH_CTRL_DATA_PREFETCH (1 << 28)
#define PREFETCH_CTRL_INSTR_PREFETCH (1 << 29)
#define PREFETCH_CTRL_DL (1 << 30)
#define PL310_POWER_CTRL 0xF60
#define POWER_CTRL_ENABLE_GATING (1 << 0)
#define POWER_CTRL_ENABLE_STANDBY (1 << 1)
struct intr_config_hook;
struct pl310_softc {
device_t sc_dev;
struct resource *sc_mem_res;
struct resource *sc_irq_res;
void* sc_irq_h;
int sc_enabled;
struct mtx sc_mtx;
u_int sc_rtl_revision;
struct intr_config_hook *sc_ich;
};
/**
* pl310_read4 - read a 32-bit value from the PL310 registers
* pl310_write4 - write a 32-bit value from the PL310 registers
* @off: byte offset within the register set to read from
* @val: the value to write into the register
*
*
* LOCKING:
* None
*
* RETURNS:
* nothing in case of write function, if read function returns the value read.
*/
static __inline uint32_t
pl310_read4(struct pl310_softc *sc, bus_size_t off)
{
return bus_read_4(sc->sc_mem_res, off);
}
static __inline void
pl310_write4(struct pl310_softc *sc, bus_size_t off, uint32_t val)
{
bus_write_4(sc->sc_mem_res, off, val);
}
void pl310_print_config(struct pl310_softc *sc);
void pl310_set_ram_latency(struct pl310_softc *sc, uint32_t which_reg,
uint32_t read, uint32_t write, uint32_t setup);
void platform_pl310_init(struct pl310_softc *);
void platform_pl310_write_ctrl(struct pl310_softc *, uint32_t);
void platform_pl310_write_debug(struct pl310_softc *, uint32_t);
#endif /* PL310_H_ */