b986d07861
into if_txreg.h. MFC after: 1 week
251 lines
8.8 KiB
C
251 lines
8.8 KiB
C
/* $OpenBSD: if_txvar.h,v 1.7 1999/11/17 05:21:19 jason Exp $ */
|
|
/* $FreeBSD$ */
|
|
|
|
/*-
|
|
* Copyright (c) 1997 Semen Ustimenko
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#define EPIC_MAX_MTU 1600 /* This is experiment-derived value */
|
|
|
|
/* PCI aux configuration registers */
|
|
#if defined(__FreeBSD__)
|
|
#define PCIR_BASEIO (PCIR_MAPS + 0x0) /* Base IO Address */
|
|
#define PCIR_BASEMEM (PCIR_MAPS + 0x4) /* Base Memory Address */
|
|
#else /* __OpenBSD__ */
|
|
#define PCI_BASEIO (PCI_MAPS + 0x0) /* Base IO Address */
|
|
#define PCI_BASEMEM (PCI_MAPS + 0x4) /* Base Memory Address */
|
|
#endif /* __FreeBSD__ */
|
|
|
|
/* PCI identification */
|
|
#define SMC_VENDORID 0x10B8
|
|
#define SMC_DEVICEID_83C170 0x0005
|
|
|
|
/* EPIC's registers */
|
|
#define COMMAND 0x0000
|
|
#define INTSTAT 0x0004 /* Interrupt status. See below */
|
|
#define INTMASK 0x0008 /* Interrupt mask. See below */
|
|
#define GENCTL 0x000C
|
|
#define NVCTL 0x0010
|
|
#define EECTL 0x0014 /* EEPROM control **/
|
|
#define TEST1 0x001C /* XXXXX */
|
|
#define CRCCNT 0x0020 /* CRC error counter */
|
|
#define ALICNT 0x0024 /* FrameTooLang error counter */
|
|
#define MPCNT 0x0028 /* MissedFrames error counters */
|
|
#define MIICTL 0x0030
|
|
#define MIIDATA 0x0034
|
|
#define MIICFG 0x0038
|
|
#define IPG 0x003C
|
|
#define LAN0 0x0040 /* MAC address */
|
|
#define LAN1 0x0044 /* MAC address */
|
|
#define LAN2 0x0048 /* MAC address */
|
|
#define ID_CHK 0x004C
|
|
#define MC0 0x0050 /* Multicast filter table */
|
|
#define MC1 0x0054 /* Multicast filter table */
|
|
#define MC2 0x0058 /* Multicast filter table */
|
|
#define MC3 0x005C /* Multicast filter table */
|
|
#define RXCON 0x0060 /* Rx control register */
|
|
#define TXCON 0x0070 /* Tx control register */
|
|
#define TXSTAT 0x0074
|
|
#define PRCDAR 0x0084 /* RxRing bus address */
|
|
#define PRSTAT 0x00A4
|
|
#define PRCPTHR 0x00B0
|
|
#define PTCDAR 0x00C4 /* TxRing bus address */
|
|
#define ETXTHR 0x00DC
|
|
|
|
#define COMMAND_STOP_RX 0x01
|
|
#define COMMAND_START_RX 0x02
|
|
#define COMMAND_TXQUEUED 0x04
|
|
#define COMMAND_RXQUEUED 0x08
|
|
#define COMMAND_NEXTFRAME 0x10
|
|
#define COMMAND_STOP_TDMA 0x20
|
|
#define COMMAND_STOP_RDMA 0x40
|
|
#define COMMAND_TXUGO 0x80
|
|
|
|
/* Interrupt register bits */
|
|
#define INTSTAT_RCC 0x00000001
|
|
#define INTSTAT_HCC 0x00000002
|
|
#define INTSTAT_RQE 0x00000004
|
|
#define INTSTAT_OVW 0x00000008
|
|
#define INTSTAT_RXE 0x00000010
|
|
#define INTSTAT_TXC 0x00000020
|
|
#define INTSTAT_TCC 0x00000040
|
|
#define INTSTAT_TQE 0x00000080
|
|
#define INTSTAT_TXU 0x00000100
|
|
#define INTSTAT_CNT 0x00000200
|
|
#define INTSTAT_PREI 0x00000400
|
|
#define INTSTAT_RCT 0x00000800
|
|
#define INTSTAT_FATAL 0x00001000 /* One of DPE,APE,PMA,PTA happend */
|
|
#define INTSTAT_UNUSED1 0x00002000
|
|
#define INTSTAT_UNUSED2 0x00004000
|
|
#define INTSTAT_GP2 0x00008000 /* PHY Event */
|
|
#define INTSTAT_INT_ACTV 0x00010000
|
|
#define INTSTAT_RXIDLE 0x00020000
|
|
#define INTSTAT_TXIDLE 0x00040000
|
|
#define INTSTAT_RCIP 0x00080000
|
|
#define INTSTAT_TCIP 0x00100000
|
|
#define INTSTAT_RBE 0x00200000
|
|
#define INTSTAT_RCTS 0x00400000
|
|
#define INTSTAT_RSV 0x00800000
|
|
#define INTSTAT_DPE 0x01000000 /* PCI Fatal error */
|
|
#define INTSTAT_APE 0x02000000 /* PCI Fatal error */
|
|
#define INTSTAT_PMA 0x04000000 /* PCI Fatal error */
|
|
#define INTSTAT_PTA 0x08000000 /* PCI Fatal error */
|
|
|
|
#define GENCTL_SOFT_RESET 0x00000001
|
|
#define GENCTL_ENABLE_INTERRUPT 0x00000002
|
|
#define GENCTL_SOFTWARE_INTERRUPT 0x00000004
|
|
#define GENCTL_POWER_DOWN 0x00000008
|
|
#define GENCTL_ONECOPY 0x00000010
|
|
#define GENCTL_BIG_ENDIAN 0x00000020
|
|
#define GENCTL_RECEIVE_DMA_PRIORITY 0x00000040
|
|
#define GENCTL_TRANSMIT_DMA_PRIORITY 0x00000080
|
|
#define GENCTL_RECEIVE_FIFO_THRESHOLD128 0x00000300
|
|
#define GENCTL_RECEIVE_FIFO_THRESHOLD96 0x00000200
|
|
#define GENCTL_RECEIVE_FIFO_THRESHOLD64 0x00000100
|
|
#define GENCTL_RECEIVE_FIFO_THRESHOLD32 0x00000000
|
|
#define GENCTL_MEMORY_READ_LINE 0x00000400
|
|
#define GENCTL_MEMORY_READ_MULTIPLE 0x00000800
|
|
#define GENCTL_SOFTWARE1 0x00001000
|
|
#define GENCTL_SOFTWARE2 0x00002000
|
|
#define GENCTL_RESET_PHY 0x00004000
|
|
|
|
#define NVCTL_ENABLE_MEMORY_MAP 0x00000001
|
|
#define NVCTL_CLOCK_RUN_SUPPORTED 0x00000002
|
|
#define NVCTL_GP1_OUTPUT_ENABLE 0x00000004
|
|
#define NVCTL_GP2_OUTPUT_ENABLE 0x00000008
|
|
#define NVCTL_GP1 0x00000010
|
|
#define NVCTL_GP2 0x00000020
|
|
#define NVCTL_CARDBUS_MODE 0x00000040
|
|
#define NVCTL_IPG_DELAY_MASK(x) ((x&0xF)<<7)
|
|
|
|
#define RXCON_SAVE_ERRORED_PACKETS 0x00000001
|
|
#define RXCON_RECEIVE_RUNT_FRAMES 0x00000002
|
|
#define RXCON_RECEIVE_BROADCAST_FRAMES 0x00000004
|
|
#define RXCON_RECEIVE_MULTICAST_FRAMES 0x00000008
|
|
#define RXCON_RECEIVE_INVERSE_INDIVIDUAL_ADDRESS_FRAMES 0x00000010
|
|
#define RXCON_PROMISCUOUS_MODE 0x00000020
|
|
#define RXCON_MONITOR_MODE 0x00000040
|
|
#define RXCON_EARLY_RECEIVE_ENABLE 0x00000080
|
|
#define RXCON_EXTERNAL_BUFFER_DISABLE 0x00000000
|
|
#define RXCON_EXTERNAL_BUFFER_16K 0x00000100
|
|
#define RXCON_EXTERNAL_BUFFER_32K 0x00000200
|
|
#define RXCON_EXTERNAL_BUFFER_128K 0x00000300
|
|
|
|
#define TXCON_EARLY_TRANSMIT_ENABLE 0x00000001
|
|
#define TXCON_LOOPBACK_DISABLE 0x00000000
|
|
#define TXCON_LOOPBACK_MODE_INT 0x00000002
|
|
#define TXCON_LOOPBACK_MODE_PHY 0x00000004
|
|
#define TXCON_LOOPBACK_MODE 0x00000006
|
|
#define TXCON_FULL_DUPLEX 0x00000006
|
|
#define TXCON_SLOT_TIME 0x00000078
|
|
|
|
#define MIICFG_SERIAL_ENABLE 0x00000001
|
|
#define MIICFG_694_ENABLE 0x00000002
|
|
#define MIICFG_694_STATUS 0x00000004
|
|
#define MIICFG_PHY_PRESENT 0x00000008
|
|
#define MIICFG_SMI_ENABLE 0x00000010
|
|
|
|
#define TEST1_CLOCK_TEST 0x00000008
|
|
|
|
/*
|
|
* Some default values
|
|
*/
|
|
#define TXCON_DEFAULT (TXCON_SLOT_TIME | TXCON_EARLY_TRANSMIT_ENABLE)
|
|
#define TRANSMIT_THRESHOLD 0x300
|
|
|
|
#define RXCON_DEFAULT (RXCON_RECEIVE_MULTICAST_FRAMES | \
|
|
RXCON_RECEIVE_BROADCAST_FRAMES)
|
|
|
|
#define RXCON_EARLY_RX (RXCON_EARLY_RECEIVE_ENABLE | \
|
|
RXCON_SAVE_ERRORED_PACKETS)
|
|
/*
|
|
* EEPROM structure
|
|
* SMC9432* eeprom is organized by words and only first 8 words
|
|
* have distinctive meaning (according to datasheet)
|
|
*/
|
|
#define EEPROM_MAC0 0x0000 /* Byte 0 / Byte 1 */
|
|
#define EEPROM_MAC1 0x0001 /* Byte 2 / Byte 3 */
|
|
#define EEPROM_MAC2 0x0002 /* Byte 4 / Byte 5 */
|
|
#define EEPROM_BID_CSUM 0x0003 /* Board Id / Check Sum */
|
|
#define EEPROM_NVCTL 0x0004 /* NVCTL (bits 0-5) / nothing */
|
|
#define EEPROM_PCI_MGD_MLD 0x0005 /* PCI MinGrant / MaxLatency. Desired */
|
|
#define EEPROM_SSVENDID 0x0006 /* Subsystem Vendor Id */
|
|
#define EEPROM_SSID 0x0006 /* Subsystem Id */
|
|
|
|
/*
|
|
* Hardware structures
|
|
*/
|
|
|
|
/* EPIC's hardware descriptors, must be aligned on dword in memory */
|
|
/* NB: to make driver happy, this two structures MUST have thier sizes */
|
|
/* be divisor of PAGE_SIZE */
|
|
struct epic_tx_desc {
|
|
volatile u_int16_t status;
|
|
volatile u_int16_t txlength;
|
|
volatile u_int32_t bufaddr;
|
|
volatile u_int16_t buflength;
|
|
volatile u_int16_t control;
|
|
volatile u_int32_t next;
|
|
};
|
|
struct epic_rx_desc {
|
|
volatile u_int16_t status;
|
|
volatile u_int16_t rxlength;
|
|
volatile u_int32_t bufaddr;
|
|
volatile u_int32_t buflength;
|
|
volatile u_int32_t next;
|
|
};
|
|
|
|
/* This structure defines EPIC's fragment list, maximum number of frags */
|
|
/* is 63. Let use maximum, becouse size of struct MUST be divisor of */
|
|
/* PAGE_SIZE, and sometimes come mbufs with more then 30 frags */
|
|
#define EPIC_MAX_FRAGS 63
|
|
struct epic_frag_list {
|
|
volatile u_int32_t numfrags;
|
|
struct {
|
|
volatile u_int32_t fragaddr;
|
|
volatile u_int32_t fraglen;
|
|
} frag[EPIC_MAX_FRAGS];
|
|
volatile u_int32_t pad; /* align on 256 bytes */
|
|
};
|
|
|
|
/*
|
|
* NB: ALIGN OF ABOVE STRUCTURES
|
|
* epic_rx_desc, epic_tx_desc, epic_frag_list - must be aligned on dword
|
|
*/
|
|
|
|
#define SMC9432DMT 0xA010
|
|
#define SMC9432TX 0xA011
|
|
#define SMC9032TXM 0xA012
|
|
#define SMC9032TX 0xA013
|
|
#define SMC9432TXPWR 0xA014
|
|
#define SMC9432BTX 0xA015
|
|
#define SMC9432FTX 0xA016
|
|
#define SMC9432FTX_SC 0xA017
|
|
#define SMC9432TX_XG_ADHOC 0xA020
|
|
#define SMC9434TX_XG_ADHOC 0xA021
|
|
#define SMC9432FTX_ADHOC 0xA022
|
|
#define SMC9432BTX1 0xA024
|
|
|