47 lines
1.7 KiB
Bash
47 lines
1.7 KiB
Bash
#!/bin/sh
|
|
# script to set up a frame relay link on the sr card.
|
|
# The dlci used is selected below. The default is 16
|
|
# $FreeBSD$
|
|
|
|
CARD=sr0
|
|
DLCI=16
|
|
|
|
# create a frame_relay type node and attach it to the sync port.
|
|
ngctl mkpeer ${CARD}: frame_relay rawdata downstream
|
|
|
|
# Attach the dlci output of the (de)multiplexor to a new
|
|
# Link management protocol node.
|
|
ngctl mkpeer ${CARD}:rawdata lmi dlci0 auto0
|
|
|
|
# Also attach dlci 1023, as it needs both to try auto-configuring.
|
|
# The Link management protocol is now alive and probing..
|
|
ngctl connect ${CARD}:rawdata ${CARD}:rawdata.dlci0 dlci1023 auto1023
|
|
|
|
# Attach the DLCI(channel) the Telco has assigned you to
|
|
# a node to handle whatever protocol encapsulation your peer
|
|
# is using. In this case RFC1490 encapsulation.
|
|
ngctl mkpeer ${CARD}:rawdata rfc1490 dlci${DLCI} downstream
|
|
|
|
|
|
# Attach the ip (inet) protocol output of the protocol mux to the ip (inet)
|
|
# input of a netgraph "interface" node (ifconfig should show it as "ng0").
|
|
#if interface ng0 needs to be created use a mkpeer command.. e.g.
|
|
ngctl mkpeer ${CARD}:rawdata.dlci${DLCI} iface inet inet
|
|
|
|
# if ng0 already exists, use a CONNECT command instead of a mkpeer. e.g.
|
|
# ngctl connect ${CARD}:rawdata.dlci${DLCI} ng0: inet inet
|
|
|
|
# Then use ifconfig on interface ng0 as usual
|
|
|
|
# A variant on this whole set might use the 'name' command to make it more
|
|
# readable. But it doesn't work if you have multiple lines or dlcis
|
|
# e.g.
|
|
# ngctl mkpeer ${CARD}: frame_relay rawdata downstream
|
|
# ngctl name ${CARD}:rawdata mux
|
|
# ngctl mkpeer mux: lmi dlci0 auto0
|
|
# ngctl name mux:dlci0 lmi
|
|
# ngctl connect mux: lmi: dlci1023 auto1023
|
|
# ngctl mkpeer mux: rfc1490 dlci${DLCI} downstream
|
|
# ngctl mux:dlci${DLCI} protomux
|
|
# ngctl mkpeer protomux: iface inet inet
|