freebsd-skq/sys/netinet6/scope6.c
Bjoern A. Zeeb 4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00

504 lines
12 KiB
C

/*-
* Copyright (C) 2000 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $KAME: scope6.c,v 1.10 2000/07/24 13:29:31 itojun Exp $
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/queue.h>
#include <sys/syslog.h>
#include <sys/vimage.h>
#include <net/route.h>
#include <net/if.h>
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/ip6.h>
#include <netinet6/in6_var.h>
#include <netinet6/scope6_var.h>
#include <netinet6/vinet6.h>
/*
* The scope6_lock protects the global sid default stored in
* sid_default below.
*/
static struct mtx scope6_lock;
#define SCOPE6_LOCK_INIT() mtx_init(&scope6_lock, "scope6_lock", NULL, MTX_DEF)
#define SCOPE6_LOCK() mtx_lock(&scope6_lock)
#define SCOPE6_UNLOCK() mtx_unlock(&scope6_lock)
#define SCOPE6_LOCK_ASSERT() mtx_assert(&scope6_lock, MA_OWNED)
#ifdef VIMAGE_GLOBALS
static struct scope6_id sid_default;
int ip6_use_defzone;
#endif
#define SID(ifp) \
(((struct in6_ifextra *)(ifp)->if_afdata[AF_INET6])->scope6_id)
void
scope6_init(void)
{
INIT_VNET_INET6(curvnet);
#ifdef ENABLE_DEFAULT_SCOPE
V_ip6_use_defzone = 1;
#else
V_ip6_use_defzone = 0;
#endif
SCOPE6_LOCK_INIT();
bzero(&V_sid_default, sizeof(V_sid_default));
}
struct scope6_id *
scope6_ifattach(struct ifnet *ifp)
{
struct scope6_id *sid;
sid = (struct scope6_id *)malloc(sizeof(*sid), M_IFADDR, M_WAITOK);
bzero(sid, sizeof(*sid));
/*
* XXX: IPV6_ADDR_SCOPE_xxx macros are not standard.
* Should we rather hardcode here?
*/
sid->s6id_list[IPV6_ADDR_SCOPE_INTFACELOCAL] = ifp->if_index;
sid->s6id_list[IPV6_ADDR_SCOPE_LINKLOCAL] = ifp->if_index;
#ifdef MULTI_SCOPE
/* by default, we don't care about scope boundary for these scopes. */
sid->s6id_list[IPV6_ADDR_SCOPE_SITELOCAL] = 1;
sid->s6id_list[IPV6_ADDR_SCOPE_ORGLOCAL] = 1;
#endif
return sid;
}
void
scope6_ifdetach(struct scope6_id *sid)
{
free(sid, M_IFADDR);
}
int
scope6_set(struct ifnet *ifp, struct scope6_id *idlist)
{
INIT_VNET_NET(ifp->if_vnet);
int i;
int error = 0;
struct scope6_id *sid = NULL;
IF_AFDATA_LOCK(ifp);
sid = SID(ifp);
if (!sid) { /* paranoid? */
IF_AFDATA_UNLOCK(ifp);
return (EINVAL);
}
/*
* XXX: We need more consistency checks of the relationship among
* scopes (e.g. an organization should be larger than a site).
*/
/*
* TODO(XXX): after setting, we should reflect the changes to
* interface addresses, routing table entries, PCB entries...
*/
SCOPE6_LOCK();
for (i = 0; i < 16; i++) {
if (idlist->s6id_list[i] &&
idlist->s6id_list[i] != sid->s6id_list[i]) {
/*
* An interface zone ID must be the corresponding
* interface index by definition.
*/
if (i == IPV6_ADDR_SCOPE_INTFACELOCAL &&
idlist->s6id_list[i] != ifp->if_index) {
IF_AFDATA_UNLOCK(ifp);
SCOPE6_UNLOCK();
return (EINVAL);
}
if (i == IPV6_ADDR_SCOPE_LINKLOCAL &&
idlist->s6id_list[i] > V_if_index) {
/*
* XXX: theoretically, there should be no
* relationship between link IDs and interface
* IDs, but we check the consistency for
* safety in later use.
*/
IF_AFDATA_UNLOCK(ifp);
SCOPE6_UNLOCK();
return (EINVAL);
}
/*
* XXX: we must need lots of work in this case,
* but we simply set the new value in this initial
* implementation.
*/
sid->s6id_list[i] = idlist->s6id_list[i];
}
}
SCOPE6_UNLOCK();
IF_AFDATA_UNLOCK(ifp);
return (error);
}
int
scope6_get(struct ifnet *ifp, struct scope6_id *idlist)
{
/* We only need to lock the interface's afdata for SID() to work. */
IF_AFDATA_LOCK(ifp);
struct scope6_id *sid = SID(ifp);
if (sid == NULL) { /* paranoid? */
IF_AFDATA_UNLOCK(ifp);
return (EINVAL);
}
SCOPE6_LOCK();
*idlist = *sid;
SCOPE6_UNLOCK();
IF_AFDATA_UNLOCK(ifp);
return (0);
}
/*
* Get a scope of the address. Node-local, link-local, site-local or global.
*/
int
in6_addrscope(struct in6_addr *addr)
{
int scope;
if (addr->s6_addr[0] == 0xfe) {
scope = addr->s6_addr[1] & 0xc0;
switch (scope) {
case 0x80:
return IPV6_ADDR_SCOPE_LINKLOCAL;
break;
case 0xc0:
return IPV6_ADDR_SCOPE_SITELOCAL;
break;
default:
return IPV6_ADDR_SCOPE_GLOBAL; /* just in case */
break;
}
}
if (addr->s6_addr[0] == 0xff) {
scope = addr->s6_addr[1] & 0x0f;
/*
* due to other scope such as reserved,
* return scope doesn't work.
*/
switch (scope) {
case IPV6_ADDR_SCOPE_INTFACELOCAL:
return IPV6_ADDR_SCOPE_INTFACELOCAL;
break;
case IPV6_ADDR_SCOPE_LINKLOCAL:
return IPV6_ADDR_SCOPE_LINKLOCAL;
break;
case IPV6_ADDR_SCOPE_SITELOCAL:
return IPV6_ADDR_SCOPE_SITELOCAL;
break;
default:
return IPV6_ADDR_SCOPE_GLOBAL;
break;
}
}
/*
* Regard loopback and unspecified addresses as global, since
* they have no ambiguity.
*/
if (bcmp(&in6addr_loopback, addr, sizeof(*addr) - 1) == 0) {
if (addr->s6_addr[15] == 1) /* loopback */
return IPV6_ADDR_SCOPE_LINKLOCAL;
if (addr->s6_addr[15] == 0) /* unspecified */
return IPV6_ADDR_SCOPE_GLOBAL; /* XXX: correct? */
}
return IPV6_ADDR_SCOPE_GLOBAL;
}
/*
* ifp - note that this might be NULL
*/
void
scope6_setdefault(struct ifnet *ifp)
{
INIT_VNET_INET6(ifp->if_vnet);
/*
* Currently, this function just sets the default "interfaces"
* and "links" according to the given interface.
* We might eventually have to separate the notion of "link" from
* "interface" and provide a user interface to set the default.
*/
SCOPE6_LOCK();
if (ifp) {
V_sid_default.s6id_list[IPV6_ADDR_SCOPE_INTFACELOCAL] =
ifp->if_index;
V_sid_default.s6id_list[IPV6_ADDR_SCOPE_LINKLOCAL] =
ifp->if_index;
} else {
V_sid_default.s6id_list[IPV6_ADDR_SCOPE_INTFACELOCAL] = 0;
V_sid_default.s6id_list[IPV6_ADDR_SCOPE_LINKLOCAL] = 0;
}
SCOPE6_UNLOCK();
}
int
scope6_get_default(struct scope6_id *idlist)
{
INIT_VNET_INET6(curvnet);
SCOPE6_LOCK();
*idlist = V_sid_default;
SCOPE6_UNLOCK();
return (0);
}
u_int32_t
scope6_addr2default(struct in6_addr *addr)
{
INIT_VNET_INET6(curvnet);
u_int32_t id;
/*
* special case: The loopback address should be considered as
* link-local, but there's no ambiguity in the syntax.
*/
if (IN6_IS_ADDR_LOOPBACK(addr))
return (0);
/*
* XXX: 32-bit read is atomic on all our platforms, is it OK
* not to lock here?
*/
SCOPE6_LOCK();
id = V_sid_default.s6id_list[in6_addrscope(addr)];
SCOPE6_UNLOCK();
return (id);
}
/*
* Validate the specified scope zone ID in the sin6_scope_id field. If the ID
* is unspecified (=0), needs to be specified, and the default zone ID can be
* used, the default value will be used.
* This routine then generates the kernel-internal form: if the address scope
* of is interface-local or link-local, embed the interface index in the
* address.
*/
int
sa6_embedscope(struct sockaddr_in6 *sin6, int defaultok)
{
INIT_VNET_NET(curvnet);
struct ifnet *ifp;
u_int32_t zoneid;
if ((zoneid = sin6->sin6_scope_id) == 0 && defaultok)
zoneid = scope6_addr2default(&sin6->sin6_addr);
if (zoneid != 0 &&
(IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr) ||
IN6_IS_ADDR_MC_INTFACELOCAL(&sin6->sin6_addr))) {
/*
* At this moment, we only check interface-local and
* link-local scope IDs, and use interface indices as the
* zone IDs assuming a one-to-one mapping between interfaces
* and links.
*/
if (V_if_index < zoneid)
return (ENXIO);
ifp = ifnet_byindex(zoneid);
if (ifp == NULL) /* XXX: this can happen for some OS */
return (ENXIO);
/* XXX assignment to 16bit from 32bit variable */
sin6->sin6_addr.s6_addr16[1] = htons(zoneid & 0xffff);
sin6->sin6_scope_id = 0;
}
return 0;
}
/*
* generate standard sockaddr_in6 from embedded form.
*/
int
sa6_recoverscope(struct sockaddr_in6 *sin6)
{
INIT_VNET_NET(curvnet);
char ip6buf[INET6_ADDRSTRLEN];
u_int32_t zoneid;
if (sin6->sin6_scope_id != 0) {
log(LOG_NOTICE,
"sa6_recoverscope: assumption failure (non 0 ID): %s%%%d\n",
ip6_sprintf(ip6buf, &sin6->sin6_addr), sin6->sin6_scope_id);
/* XXX: proceed anyway... */
}
if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr) ||
IN6_IS_ADDR_MC_INTFACELOCAL(&sin6->sin6_addr)) {
/*
* KAME assumption: link id == interface id
*/
zoneid = ntohs(sin6->sin6_addr.s6_addr16[1]);
if (zoneid) {
/* sanity check */
if (zoneid < 0 || V_if_index < zoneid)
return (ENXIO);
if (!ifnet_byindex(zoneid))
return (ENXIO);
sin6->sin6_addr.s6_addr16[1] = 0;
sin6->sin6_scope_id = zoneid;
}
}
return 0;
}
/*
* Determine the appropriate scope zone ID for in6 and ifp. If ret_id is
* non NULL, it is set to the zone ID. If the zone ID needs to be embedded
* in the in6_addr structure, in6 will be modified.
*
* ret_id - unnecessary?
*/
int
in6_setscope(struct in6_addr *in6, struct ifnet *ifp, u_int32_t *ret_id)
{
int scope;
u_int32_t zoneid = 0;
struct scope6_id *sid;
IF_AFDATA_LOCK(ifp);
sid = SID(ifp);
#ifdef DIAGNOSTIC
if (sid == NULL) { /* should not happen */
panic("in6_setscope: scope array is NULL");
/* NOTREACHED */
}
#endif
/*
* special case: the loopback address can only belong to a loopback
* interface.
*/
if (IN6_IS_ADDR_LOOPBACK(in6)) {
if (!(ifp->if_flags & IFF_LOOPBACK)) {
IF_AFDATA_UNLOCK(ifp);
return (EINVAL);
} else {
if (ret_id != NULL)
*ret_id = 0; /* there's no ambiguity */
IF_AFDATA_UNLOCK(ifp);
return (0);
}
}
scope = in6_addrscope(in6);
SCOPE6_LOCK();
switch (scope) {
case IPV6_ADDR_SCOPE_INTFACELOCAL: /* should be interface index */
zoneid = sid->s6id_list[IPV6_ADDR_SCOPE_INTFACELOCAL];
break;
case IPV6_ADDR_SCOPE_LINKLOCAL:
zoneid = sid->s6id_list[IPV6_ADDR_SCOPE_LINKLOCAL];
break;
case IPV6_ADDR_SCOPE_SITELOCAL:
zoneid = sid->s6id_list[IPV6_ADDR_SCOPE_SITELOCAL];
break;
case IPV6_ADDR_SCOPE_ORGLOCAL:
zoneid = sid->s6id_list[IPV6_ADDR_SCOPE_ORGLOCAL];
break;
default:
zoneid = 0; /* XXX: treat as global. */
break;
}
SCOPE6_UNLOCK();
IF_AFDATA_UNLOCK(ifp);
if (ret_id != NULL)
*ret_id = zoneid;
if (IN6_IS_SCOPE_LINKLOCAL(in6) || IN6_IS_ADDR_MC_INTFACELOCAL(in6))
in6->s6_addr16[1] = htons(zoneid & 0xffff); /* XXX */
return (0);
}
/*
* Just clear the embedded scope identifier. Return 0 if the original address
* is intact; return non 0 if the address is modified.
*/
int
in6_clearscope(struct in6_addr *in6)
{
int modified = 0;
if (IN6_IS_SCOPE_LINKLOCAL(in6) || IN6_IS_ADDR_MC_INTFACELOCAL(in6)) {
if (in6->s6_addr16[1] != 0)
modified = 1;
in6->s6_addr16[1] = 0;
}
return (modified);
}