cc31866200
(download microcode with offsets, save, and activate). SATI translation layer was incorrectly using allocation length instead of blocks, and was constructing the ATA command incorrectly. Also change #define to specify that the 512 block size here is specific for DOWNLOAD_MICROCODE, and does not relate to the device's logical block size. Submitted by: scottl (with small modifications) MFC after: 3 days
2009 lines
72 KiB
C
2009 lines
72 KiB
C
/*-
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/**
|
|
* @file
|
|
* @brief This file contains all of the method implementations that
|
|
* provide generic support for SATI. Some methods can be utilized
|
|
* by a user to construct ATA/ATAPI commands, copy ATA device
|
|
* structure data, fill in sense data, etc.
|
|
*/
|
|
|
|
#include <dev/isci/scil/sati_util.h>
|
|
#include <dev/isci/scil/sati_callbacks.h>
|
|
#include <dev/isci/scil/intel_scsi.h>
|
|
#include <dev/isci/scil/intel_ata.h>
|
|
#include <dev/isci/scil/intel_sat.h>
|
|
#include <dev/isci/scil/intel_sas.h>
|
|
|
|
/**
|
|
* @brief This method will set the data direction, protocol, and transfer
|
|
* kength for an ATA non-data command.
|
|
*
|
|
* @pre It is expected that the user will use this method for setting these
|
|
* values in a non-data ATA command constuct.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the IDENTIFY DEVICE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_non_data_command(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
sequence->data_direction = SATI_DATA_DIRECTION_NONE;
|
|
sequence->protocol = SAT_PROTOCOL_NON_DATA;
|
|
sequence->ata_transfer_length = 0;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA identify device command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the IDENTIFY DEVICE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_identify_device_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_IDENTIFY_DEVICE);
|
|
sequence->data_direction = SATI_DATA_DIRECTION_IN;
|
|
sequence->protocol = SAT_PROTOCOL_PIO_DATA_IN;
|
|
sequence->ata_transfer_length = sizeof(ATA_IDENTIFY_DEVICE_DATA_T);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA Execute Device Diagnostic command.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the IDENTIFY DEVICE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_execute_device_diagnostic_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_EXECUTE_DEVICE_DIAG);
|
|
|
|
sequence->data_direction = SATI_DATA_DIRECTION_IN;
|
|
sequence->protocol = SAT_PROTOCOL_DEVICE_DIAGNOSTIC;
|
|
sequence->ata_transfer_length = 16;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will set data bytes in the user data area. If the
|
|
* caller requests it, the data written will be forced to ascii
|
|
* printable characters if it isn't already a printable character.
|
|
* A printable character is considered to be >= 0x20 and <= 0x70.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to copy and swap the data.
|
|
* @param[out] destination_scsi_io This parameter specifies the SCSI IO
|
|
* request containing the destination buffer into which to copy.
|
|
* @param[in] destination_offset This parameter specifies the offset into
|
|
* the data buffer where the information will be copied to.
|
|
* @param[in] source_value This parameter specifies the value retrieved
|
|
* from the source buffer that is to be copied into the user
|
|
* buffer area.
|
|
* @param[in] use_printable_chars This parameter indicates if the copy should
|
|
* ensure that the value copied is considered an ASCII printable
|
|
* character (e.g. A, B, " ", etc.). These characters reside
|
|
* in the 0x20 - 0x7E ASCII range.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_set_ascii_data_byte(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * destination_scsi_io,
|
|
U32 destination_offset,
|
|
U8 source_value,
|
|
BOOL use_printable_chars
|
|
)
|
|
{
|
|
// if the user requests that the copied data be ascii printable, then
|
|
// default to " " (i.e. 0x20) for all non-ascii printable characters.
|
|
if((use_printable_chars == TRUE)
|
|
&& ((source_value < 0x20) || (source_value > 0x7E)))
|
|
{
|
|
source_value = 0x20;
|
|
}
|
|
|
|
sati_set_data_byte(
|
|
sequence, destination_scsi_io, destination_offset, source_value
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @brief This method performs a copy operation using an offset into the
|
|
* source buffer, an offset into the destination buffer, and a length.
|
|
* It will perform the byte swap from the 16-bit identify field
|
|
* into the network byte order SCSI location.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to copy and swap the data.
|
|
* @param[out] destination_scsi_io This parameter specifies the SCSI IO
|
|
* request containing the destination buffer into which to copy.
|
|
* @param[in] destination_offset This parameter specifies the offset into
|
|
* the data buffer where the information will be copied to.
|
|
* @param[in] source_buffer This parameter specifies the source buffer from
|
|
* which the data will be copied.
|
|
* @param[in] source_offset This parameter specifies the offset into the
|
|
* source buffer where the copy shall begin.
|
|
* @param[in] length This parameter specifies the number of bytes to copy
|
|
* during this operation.
|
|
* @param[in] use_printable_chars This parameter indicates if the copy should
|
|
* ensure that the value copied is considered an ASCII printable
|
|
* character (e.g. A, B, " ", etc.). These characters reside
|
|
* in the 0x20 - 0x7E ASCII range.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_ata_identify_device_copy_data(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * destination_scsi_io,
|
|
U32 destination_offset,
|
|
U8 * source_buffer,
|
|
U32 source_offset,
|
|
U32 length,
|
|
BOOL use_printable_chars
|
|
)
|
|
{
|
|
source_buffer += source_offset;
|
|
while (length > 0)
|
|
{
|
|
sati_set_ascii_data_byte(
|
|
sequence,
|
|
destination_scsi_io,
|
|
destination_offset,
|
|
*(source_buffer+1),
|
|
use_printable_chars
|
|
);
|
|
|
|
sati_set_ascii_data_byte(
|
|
sequence,
|
|
destination_scsi_io,
|
|
destination_offset+1,
|
|
*source_buffer,
|
|
use_printable_chars
|
|
);
|
|
|
|
destination_offset += 2;
|
|
source_buffer += 2;
|
|
length -= 2;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This method performs a copy operation using a source buffer,
|
|
* an offset into the destination buffer, and a length.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to copy and swap the data.
|
|
* @param[out] destination_scsi_io This parameter specifies the SCSI IO
|
|
* request containing the destination buffer into which to copy.
|
|
* @param[in] destination_offset This parameter specifies the offset into
|
|
* the data buffer where the information will be copied to.
|
|
* @param[in] source_buffer This parameter specifies the source buffer from
|
|
* which the data will be copied.
|
|
* @param[in] length This parameter specifies the number of bytes to copy
|
|
* during this operation.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_copy_data(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * destination_scsi_io,
|
|
U32 destination_offset,
|
|
U8 * source_buffer,
|
|
U32 length
|
|
)
|
|
{
|
|
while (length > 0)
|
|
{
|
|
sati_set_data_byte(
|
|
sequence, destination_scsi_io, destination_offset, *source_buffer
|
|
);
|
|
|
|
destination_offset++;
|
|
source_buffer++;
|
|
length--;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This method extracts the Logical Block Address high and low 32-bit
|
|
* values and the sector count 32-bit value from the ATA identify
|
|
* device data.
|
|
*
|
|
* @param[in] identify This parameter specifies the ATA_IDENTIFY_DEVICE_DATA
|
|
* from which to extract the sector information.
|
|
* @param[out] lba_high This parameter specifies the upper 32 bits for the
|
|
* number of logical block addresses for the device. The upper
|
|
* 16-bits should always be 0, since 48-bits of LBA is the most
|
|
* supported by an ATA device.
|
|
* @param[out] lba_low This parameter specifies the lower 32 bits for the
|
|
* number of logical block addresses for the device.
|
|
* @param[out] sector_size This parameter specifies the 32-bits of sector
|
|
* size. If the ATA device doesn't support reporting it's
|
|
* sector size, then 512 bytes is utilized as the default value.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_ata_identify_device_get_sector_info(
|
|
ATA_IDENTIFY_DEVICE_DATA_T * identify,
|
|
U32 * lba_high,
|
|
U32 * lba_low,
|
|
U32 * sector_size
|
|
)
|
|
{
|
|
// Calculate the values to be returned
|
|
// Calculation will be different if the SATA device supports
|
|
// 48-bit addressing. Bit 10 of Word 86 of ATA Identify
|
|
if (identify->command_set_enabled1
|
|
& ATA_IDENTIFY_COMMAND_SET_SUPPORTED1_48BIT_ENABLE)
|
|
{
|
|
// This drive supports 48-bit addressing
|
|
|
|
*lba_high = identify->max_48bit_lba[7] << 24;
|
|
*lba_high |= identify->max_48bit_lba[6] << 16;
|
|
*lba_high |= identify->max_48bit_lba[5] << 8;
|
|
*lba_high |= identify->max_48bit_lba[4];
|
|
|
|
*lba_low = identify->max_48bit_lba[3] << 24;
|
|
*lba_low |= identify->max_48bit_lba[2] << 16;
|
|
*lba_low |= identify->max_48bit_lba[1] << 8;
|
|
*lba_low |= identify->max_48bit_lba[0];
|
|
}
|
|
else
|
|
{
|
|
// This device doesn't support 48-bit addressing
|
|
// Pull out the largest LBA from words 60 and 61.
|
|
*lba_high = 0;
|
|
*lba_low = identify->total_num_sectors[3] << 24;
|
|
*lba_low |= identify->total_num_sectors[2] << 16;
|
|
*lba_low |= identify->total_num_sectors[1] << 8;
|
|
*lba_low |= identify->total_num_sectors[0];
|
|
}
|
|
|
|
// If the ATA device reports its sector size (bit 12 of Word 106),
|
|
// then use that instead.
|
|
if (identify->physical_logical_sector_info
|
|
& ATA_IDENTIFY_SECTOR_LARGER_THEN_512_ENABLE)
|
|
{
|
|
*sector_size = identify->words_per_logical_sector[3] << 24;
|
|
*sector_size |= identify->words_per_logical_sector[2] << 16;
|
|
*sector_size |= identify->words_per_logical_sector[1] << 8;
|
|
*sector_size |= identify->words_per_logical_sector[0];
|
|
}
|
|
else
|
|
{
|
|
// Default the sector size to 512 bytes
|
|
*sector_size = 512;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA check power mode command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the CHECK POWER MODE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_check_power_mode_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_CHECK_POWER_MODE);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method is utilized to set a specific byte in the sense
|
|
* data area. It will ensure that the supplied byte offset
|
|
* isn't larger then the length of the requested sense data.
|
|
*
|
|
* @param[in] scsi_io This parameter specifies the user SCSI IO request
|
|
* for which to set the sense data byte.
|
|
* @param[in] byte_offset This parameter specifies the byte offset into
|
|
* the sense data buffer where the data should be written.
|
|
* @param[in] value This parameter specifies the 8-bit value to be written
|
|
* into the sense data area.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_set_sense_data_byte(
|
|
U8 * sense_data,
|
|
U32 max_sense_data_len,
|
|
U32 byte_offset,
|
|
U8 value
|
|
)
|
|
{
|
|
// Ensure that we don't attempt to write past the end of the sense
|
|
// data buffer.
|
|
if (byte_offset < max_sense_data_len)
|
|
sense_data[byte_offset] = value;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the common response IU in the user
|
|
* request's response IU location.
|
|
*
|
|
* @param[out] rsp_iu This parameter specifies the user request's
|
|
* response IU to be constructed.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_data_length This parameter specifies the sense data
|
|
* length for response IU.
|
|
* @param[in] data_present The parameter specifies the specific
|
|
* data present value for response IU.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_scsi_common_response_iu_construct(
|
|
SCI_SSP_RESPONSE_IU_T * rsp_iu,
|
|
U8 scsi_status,
|
|
U8 sense_data_length,
|
|
U8 data_present
|
|
)
|
|
{
|
|
rsp_iu->sense_data_length[3] = sense_data_length;
|
|
rsp_iu->sense_data_length[2] = 0;
|
|
rsp_iu->sense_data_length[1] = 0;
|
|
rsp_iu->sense_data_length[0] = 0;
|
|
rsp_iu->status = scsi_status;
|
|
rsp_iu->data_present = data_present;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the buffer for sense data
|
|
* sense data buffer location. Additionally, it will set the user's
|
|
* SCSI status.
|
|
*
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the buffer for sense data.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[out] sense_data This paramater
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_get_sense_data_buffer(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U8 scsi_status,
|
|
U8 ** sense_data,
|
|
U32 * sense_len)
|
|
{
|
|
#ifdef SATI_TRANSPORT_SUPPORTS_SAS
|
|
SCI_SSP_RESPONSE_IU_T * rsp_iu = (SCI_SSP_RESPONSE_IU_T*)
|
|
sati_cb_get_response_iu_address(scsi_io);
|
|
|
|
sati_scsi_common_response_iu_construct(
|
|
rsp_iu,
|
|
scsi_status,
|
|
sati_scsi_get_sense_data_length(sequence, scsi_io),
|
|
SCSI_RESPONSE_DATA_PRES_SENSE_DATA
|
|
);
|
|
|
|
*sense_data = (U8*) rsp_iu->data;
|
|
*sense_len = SSP_RESPONSE_IU_MAX_DATA * 4; // dwords to bytes
|
|
#else
|
|
*sense_data = sati_cb_get_sense_data_address(scsi_io);
|
|
*sense_len = sati_cb_get_sense_data_length(scsi_io);
|
|
sati_cb_set_scsi_status(scsi_io, scsi_status);
|
|
#endif // SATI_TRANSPORT_SUPPORTS_SAS
|
|
}
|
|
|
|
/**
|
|
* @brief This method extract response code based on on device settings.
|
|
*
|
|
* @return response code
|
|
*/
|
|
static
|
|
U8 sati_scsi_get_sense_data_response_code(SATI_TRANSLATOR_SEQUENCE_T * sequence)
|
|
{
|
|
if (sequence->device->descriptor_sense_enable)
|
|
{
|
|
return SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE;
|
|
}
|
|
else
|
|
{
|
|
return SCSI_FIXED_CURRENT_RESPONSE_CODE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This method will return length of descriptor sense data for executed command.
|
|
*
|
|
* @return sense data length
|
|
*/
|
|
static
|
|
U8 sati_scsi_get_descriptor_sense_data_length(SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io)
|
|
{
|
|
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
|
|
//Initial value is descriptor header length
|
|
U8 length = 8;
|
|
|
|
switch (sati_get_cdb_byte(cdb, 0))
|
|
{
|
|
#if !defined(DISABLE_SATI_WRITE_LONG)
|
|
case SCSI_WRITE_LONG_10:
|
|
case SCSI_WRITE_LONG_16:
|
|
length += SCSI_BLOCK_DESCRIPTOR_LENGTH +
|
|
SCSI_INFORMATION_DESCRIPTOR_LENGTH;
|
|
break;
|
|
#endif // !defined(DISABLE_SATI_WRITE_LONG)
|
|
#if !defined(DISABLE_SATI_REASSIGN_BLOCKS)
|
|
case SCSI_REASSIGN_BLOCKS:
|
|
length += SCSI_CMD_SPECIFIC_DESCRIPTOR_LENGTH +
|
|
SCSI_INFORMATION_DESCRIPTOR_LENGTH;
|
|
break;
|
|
#endif // !defined(DISABLE_SATI_REASSIGN_BLOCKS)
|
|
case SCSI_READ_6:
|
|
case SCSI_READ_10:
|
|
case SCSI_READ_12:
|
|
case SCSI_READ_16:
|
|
case SCSI_WRITE_6:
|
|
case SCSI_WRITE_10:
|
|
case SCSI_WRITE_12:
|
|
case SCSI_WRITE_16:
|
|
#if !defined(DISABLE_SATI_VERIFY)
|
|
case SCSI_VERIFY_10:
|
|
case SCSI_VERIFY_12:
|
|
case SCSI_VERIFY_16:
|
|
#endif // !defined(DISABLE_SATI_VERIFY)
|
|
#if !defined(DISABLE_SATI_WRITE_AND_VERIFY) \
|
|
&& !defined(DISABLE_SATI_VERIFY) \
|
|
&& !defined(DISABLE_SATI_WRITE)
|
|
|
|
case SCSI_WRITE_AND_VERIFY_10:
|
|
case SCSI_WRITE_AND_VERIFY_12:
|
|
case SCSI_WRITE_AND_VERIFY_16:
|
|
#endif // !defined(DISABLE_SATI_WRITE_AND_VERIFY)
|
|
// && !defined(DISABLE_SATI_VERIFY)
|
|
// && !defined(DISABLE_SATI_WRITE)
|
|
length += SCSI_INFORMATION_DESCRIPTOR_LENGTH;
|
|
break;
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will return length of sense data.
|
|
*
|
|
* @return sense data length
|
|
*/
|
|
U8 sati_scsi_get_sense_data_length(SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io)
|
|
{
|
|
U8 response_code;
|
|
|
|
response_code = sati_scsi_get_sense_data_response_code(sequence);
|
|
|
|
switch (response_code)
|
|
{
|
|
case SCSI_FIXED_CURRENT_RESPONSE_CODE:
|
|
case SCSI_FIXED_DEFERRED_RESPONSE_CODE:
|
|
return SCSI_FIXED_SENSE_DATA_BASE_LENGTH;
|
|
break;
|
|
case SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE:
|
|
case SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE:
|
|
return sati_scsi_get_descriptor_sense_data_length(sequence, scsi_io);
|
|
break;
|
|
}
|
|
|
|
return SCSI_FIXED_SENSE_DATA_BASE_LENGTH;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the sense data buffer in the user's
|
|
* sense data buffer location. Additionally, it will set the user's
|
|
* SCSI status.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_scsi_sense_data_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U8 scsi_status,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 response_code;
|
|
|
|
response_code = sati_scsi_get_sense_data_response_code(sequence);
|
|
|
|
switch (response_code)
|
|
{
|
|
case SCSI_FIXED_CURRENT_RESPONSE_CODE:
|
|
case SCSI_FIXED_DEFERRED_RESPONSE_CODE:
|
|
sati_scsi_fixed_sense_data_construct(sequence, scsi_io, scsi_status, response_code,
|
|
sense_key, additional_sense_code, additional_sense_code_qualifier);
|
|
break;
|
|
case SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE:
|
|
case SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE:
|
|
sati_scsi_descriptor_sense_data_construct(sequence, scsi_io, scsi_status, response_code,
|
|
sense_key, additional_sense_code, additional_sense_code_qualifier);
|
|
break;
|
|
}
|
|
|
|
sequence->is_sense_response_set = TRUE;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the block descriptor in the user's descriptor
|
|
* sense data buffer location.
|
|
*
|
|
* @param[in] sense_data This parameter specifies the user SCSI IO request
|
|
* for which to set the sense data byte.
|
|
* @param[in] sense_len This parameter specifies length of the sense data
|
|
* to be returned by SATI.
|
|
* @param[out] descriptor_len This parameter returns the length of constructed
|
|
* descriptor.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_block_descriptor_construct(
|
|
U8 * sense_data,
|
|
U32 sense_len)
|
|
{
|
|
U8 ili = 1;
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 0, SCSI_BLOCK_DESCRIPTOR_TYPE);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 1, SCSI_BLOCK_DESCRIPTOR_ADDITIONAL_LENGTH);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 2, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, (ili << 5));
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the command-specific descriptor for
|
|
* the descriptor sense data buffer in the user's sense data buffer
|
|
* location.
|
|
*
|
|
* @param[in] sense_data This parameter specifies the user SCSI IO request
|
|
* for which to set the sense data byte.
|
|
* @param[in] sense_len This parameter specifies length of the sense data
|
|
* to be returned by SATI.
|
|
* @param[out] descriptor_len This parameter returns the length of constructed
|
|
* descriptor.
|
|
* @param[in] information_buff This parameter specifies the address for which
|
|
* to set the command-specific information buffer.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_command_specific_descriptor_construct(
|
|
U8 * sense_data,
|
|
U32 sense_len,
|
|
U8 * information_buff)
|
|
{
|
|
U8 i;
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 0, SCSI_CMD_SPECIFIC_DESCRIPTOR_TYPE);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 1, SCSI_CMD_SPECIFIC_DESCRIPTOR_ADDITIONAL_LENGTH);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 2, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, 0);
|
|
|
|
// fill information buffer
|
|
// SBC 5.20.1 REASSIGN BLOCKS command overview
|
|
// If information about the first LBA not reassigned is not available
|
|
// COMMAND-SPECIFIC INFORMATION field shall be set to FFFF_FFFF_FFFF_FFFFh
|
|
for (i=0; i<8; i++)
|
|
sati_set_sense_data_byte(sense_data, sense_len, 4 + i, information_buff==NULL?0xFF:information_buff[i]);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the information descriptor for
|
|
* the descriptor sense data buffer in the user's sense data buffer
|
|
* location.
|
|
*
|
|
* @param[in] sense_data This parameter specifies the user SCSI IO request
|
|
* for which to set the sense data byte.
|
|
* @param[in] sense_len This parameter specifies length of the sense data
|
|
* to be returned by SATI.
|
|
* @param[out] descriptor_len This parameter returns the length of constructed
|
|
* descriptor.
|
|
* @param[in] information_buff This parameter specifies the address for which
|
|
* to set the information buffer.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_information_descriptor_construct(
|
|
U8 * sense_data,
|
|
U32 sense_len,
|
|
U8 * information_buff)
|
|
{
|
|
U8 i;
|
|
U8 valid = 1;
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 0, SCSI_INFORMATION_DESCRIPTOR_TYPE);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 1, SCSI_INFORMATION_DESCRIPTOR_ADDITIONAL_LENGTH);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 2, (valid << 7));
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, 0);
|
|
|
|
// fill information buffer
|
|
for (i=0; i<8; i++)
|
|
sati_set_sense_data_byte(sense_data, sense_len, 4 + i, information_buff==NULL?0:information_buff[i]);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the descriptors in the user's descriptor
|
|
* sense data buffer location.
|
|
*
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] sense_data This parameter specifies the user SCSI IO request
|
|
* for which to set the sense data byte.
|
|
* @param[in] sense_len This parameter specifies length of the sense data
|
|
* to be returned by SATI.
|
|
* @param[out] descriptor_len This parameter returns the length of constructed
|
|
* descriptor.
|
|
* @param[in] information_buff This parameter specifies the address for which
|
|
* to set the information buffer.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_common_descriptors_construct(
|
|
void * scsi_io,
|
|
U8 * sense_data,
|
|
U32 sense_len,
|
|
U8 * information_buff)
|
|
{
|
|
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
|
|
U8 offset = 0;
|
|
|
|
switch (sati_get_cdb_byte(cdb, 0))
|
|
{
|
|
#if !defined(DISABLE_SATI_WRITE_LONG)
|
|
case SCSI_WRITE_LONG_10:
|
|
case SCSI_WRITE_LONG_16:
|
|
sati_scsi_block_descriptor_construct(
|
|
sense_data + offset,
|
|
sense_len - offset);
|
|
|
|
offset += SCSI_BLOCK_DESCRIPTOR_LENGTH;
|
|
sati_scsi_information_descriptor_construct(
|
|
sense_data + offset,
|
|
sense_len - offset,
|
|
information_buff);
|
|
|
|
offset += SCSI_INFORMATION_DESCRIPTOR_LENGTH;
|
|
break;
|
|
#endif // !defined(DISABLE_SATI_WRITE_LONG)
|
|
#if !defined(DISABLE_SATI_REASSIGN_BLOCKS)
|
|
case SCSI_REASSIGN_BLOCKS:
|
|
sati_scsi_command_specific_descriptor_construct(
|
|
sense_data + offset,
|
|
sense_len - offset,
|
|
NULL);
|
|
|
|
offset += SCSI_CMD_SPECIFIC_DESCRIPTOR_LENGTH;
|
|
sati_scsi_information_descriptor_construct(
|
|
sense_data + offset,
|
|
sense_len - offset,
|
|
information_buff);
|
|
|
|
offset += SCSI_INFORMATION_DESCRIPTOR_LENGTH;
|
|
break;
|
|
#endif // !defined(DISABLE_SATI_REASSIGN_BLOCKS)
|
|
case SCSI_READ_6:
|
|
case SCSI_READ_10:
|
|
case SCSI_READ_12:
|
|
case SCSI_READ_16:
|
|
case SCSI_WRITE_6:
|
|
case SCSI_WRITE_10:
|
|
case SCSI_WRITE_12:
|
|
case SCSI_WRITE_16:
|
|
#if !defined(DISABLE_SATI_VERIFY)
|
|
case SCSI_VERIFY_10:
|
|
case SCSI_VERIFY_12:
|
|
case SCSI_VERIFY_16:
|
|
#endif // !defined(DISABLE_SATI_VERIFY)
|
|
#if !defined(DISABLE_SATI_WRITE_AND_VERIFY) \
|
|
&& !defined(DISABLE_SATI_VERIFY) \
|
|
&& !defined(DISABLE_SATI_WRITE)
|
|
|
|
case SCSI_WRITE_AND_VERIFY_10:
|
|
case SCSI_WRITE_AND_VERIFY_12:
|
|
case SCSI_WRITE_AND_VERIFY_16:
|
|
#endif // !defined(DISABLE_SATI_WRITE_AND_VERIFY)
|
|
// && !defined(DISABLE_SATI_VERIFY)
|
|
// && !defined(DISABLE_SATI_WRITE)
|
|
sati_scsi_information_descriptor_construct(
|
|
sense_data + offset,
|
|
sense_len - offset,
|
|
information_buff);
|
|
|
|
offset += SCSI_INFORMATION_DESCRIPTOR_LENGTH;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the descriptor sense data buffer in
|
|
* the user's sense data buffer location. Additionally, it will set
|
|
* the user's SCSI status.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_scsi_descriptor_sense_data_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U8 scsi_status,
|
|
U8 response_code,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 * sense_data;
|
|
U32 sense_len;
|
|
|
|
sati_scsi_get_sense_data_buffer(sequence, scsi_io, scsi_status, &sense_data, &sense_len);
|
|
|
|
sati_set_sense_data_byte(
|
|
sense_data,
|
|
sense_len,
|
|
0,
|
|
response_code
|
|
);
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 1, sense_key);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 2, additional_sense_code);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, additional_sense_code_qualifier);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 4, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 5, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 6, 0);
|
|
|
|
sati_scsi_common_descriptors_construct(scsi_io, sense_data + 8, sense_len, NULL);
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 7, sati_scsi_get_descriptor_sense_data_length(sequence, scsi_io) - 8);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the fixed format sense data buffer
|
|
* in the user's sense data buffer location. Additionally, it will
|
|
* set the user's SCSI status.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_scsi_fixed_sense_data_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U8 scsi_status,
|
|
U8 response_code,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 * sense_data;
|
|
U32 sense_len;
|
|
|
|
sati_scsi_get_sense_data_buffer(sequence, scsi_io, scsi_status, &sense_data, &sense_len);
|
|
|
|
// Write out the sense data format per SPC-4.
|
|
// We utilize the fixed format sense data format.
|
|
|
|
sati_set_sense_data_byte(
|
|
sense_data,
|
|
sense_len,
|
|
0,
|
|
response_code | SCSI_FIXED_SENSE_DATA_VALID_BIT
|
|
);
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 1, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 2, sense_key);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 4, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 5, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 6, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 7, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 8, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 9, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 10, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 11, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 12, additional_sense_code);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 13, additional_sense_code_qualifier);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 14, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 15, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 16, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 17, 0);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct common sense data that will be identical in
|
|
* both read error sense construct functions.
|
|
* sati_scsi_read_ncq_error_sense_construct,
|
|
* sati_scsi_read_error_sense_construct
|
|
*
|
|
* @param[in] sense_data This parameter specifies the user SCSI IO request
|
|
* for which to set the sense data byte.
|
|
* @param[in] sense_len This parameter specifies length of the sense data
|
|
* to be returned by SATI.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_common_fixed_sense_construct(
|
|
U8 * sense_data,
|
|
U32 sense_len,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 1, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 2, sense_key);
|
|
|
|
//Bytes 3, 4, 5, 6 are set in read_error_sense_construct functions
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 7, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 8, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 9, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 10, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 11, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 12, additional_sense_code);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 13, additional_sense_code_qualifier);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 14, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 15, 0x80);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 16, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 17, 0);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the descriptor sense data buffer in
|
|
* the user's sense data buffer location. Additionally, it will set
|
|
* the user's SCSI status.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_common_descriptor_sense_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U8 * sense_data,
|
|
U32 sense_len,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier,
|
|
U8 * information_buff
|
|
)
|
|
{
|
|
sati_set_sense_data_byte(sense_data, sense_len, 1, sense_key);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 2, additional_sense_code);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, additional_sense_code_qualifier);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 4, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 5, 0);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 6, 0);
|
|
|
|
sati_scsi_common_descriptors_construct(scsi_io, sense_data + 8, sense_len, information_buff);
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 7, sati_scsi_get_descriptor_sense_data_length(sequence, scsi_io) - 8);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the sense data buffer in the user's
|
|
* descriptor sense data buffer location. Additionally, it will set
|
|
* the user's SCSI status. This is only used for NCQ uncorrectable
|
|
* read errors
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] ata_input_data This parameter specifies the user's ATA IO
|
|
* response from a Read Log Ext command.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_read_ncq_error_descriptor_sense_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
void * ata_input_data,
|
|
U8 scsi_status,
|
|
U8 response_code,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 * sense_data;
|
|
U32 sense_len;
|
|
|
|
U8 information_buff[8] = {0};
|
|
|
|
ATA_NCQ_COMMAND_ERROR_LOG_T * ncq_log = (ATA_NCQ_COMMAND_ERROR_LOG_T *) ata_input_data;
|
|
|
|
sati_scsi_get_sense_data_buffer(sequence, scsi_io, scsi_status, &sense_data, &sense_len);
|
|
|
|
sati_set_sense_data_byte(
|
|
sense_data,
|
|
sense_len,
|
|
0,
|
|
response_code
|
|
);
|
|
|
|
information_buff[2] = ncq_log->lba_47_40;
|
|
information_buff[3] = ncq_log->lba_39_32;
|
|
information_buff[4] = ncq_log->lba_31_24;
|
|
information_buff[5] = ncq_log->lba_23_16;
|
|
information_buff[6] = ncq_log->lba_15_8;
|
|
information_buff[7] = ncq_log->lba_7_0;
|
|
|
|
sati_scsi_common_descriptor_sense_construct(
|
|
sequence,
|
|
scsi_io,
|
|
sense_data,
|
|
sense_len,
|
|
sense_key,
|
|
additional_sense_code,
|
|
additional_sense_code_qualifier,
|
|
information_buff
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the sense data buffer in the user's
|
|
* sense data buffer location. Additionally, it will set the user's
|
|
* SCSI status. This is only used for NCQ uncorrectable read errors
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] ata_input_data This parameter specifies the user's ATA IO
|
|
* response from a Read Log Ext command.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_read_ncq_error_fixed_sense_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
void * ata_input_data,
|
|
U8 scsi_status,
|
|
U8 response_code,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 * sense_data;
|
|
U32 sense_len;
|
|
U8 valid = TRUE;
|
|
|
|
ATA_NCQ_COMMAND_ERROR_LOG_T * ncq_log = (ATA_NCQ_COMMAND_ERROR_LOG_T *) ata_input_data;
|
|
|
|
sati_scsi_get_sense_data_buffer(sequence, scsi_io, scsi_status, &sense_data, &sense_len);
|
|
|
|
if(ncq_log->lba_39_32 > 0)
|
|
{
|
|
valid = FALSE;
|
|
}
|
|
|
|
sati_set_sense_data_byte(
|
|
sense_data,
|
|
sense_len,
|
|
0,
|
|
(valid << 7) | response_code
|
|
);
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, ncq_log->lba_31_24);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 4, ncq_log->lba_23_16);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 5, ncq_log->lba_15_8);
|
|
sati_set_sense_data_byte(sense_data, sense_len, 6, ncq_log->lba_7_0);
|
|
|
|
sati_scsi_common_fixed_sense_construct(
|
|
sense_data,
|
|
sense_len,
|
|
sense_key,
|
|
additional_sense_code,
|
|
additional_sense_code_qualifier
|
|
);
|
|
}
|
|
|
|
void sati_scsi_read_ncq_error_sense_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
void * ata_input_data,
|
|
U8 scsi_status,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 response_code;
|
|
|
|
response_code = sati_scsi_get_sense_data_response_code(sequence);
|
|
|
|
switch (response_code)
|
|
{
|
|
case SCSI_FIXED_CURRENT_RESPONSE_CODE:
|
|
case SCSI_FIXED_DEFERRED_RESPONSE_CODE:
|
|
sati_scsi_read_ncq_error_fixed_sense_construct(sequence, scsi_io, ata_input_data, scsi_status,
|
|
response_code, sense_key, additional_sense_code, additional_sense_code_qualifier);
|
|
break;
|
|
case SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE:
|
|
case SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE:
|
|
sati_scsi_read_ncq_error_descriptor_sense_construct(sequence, scsi_io, ata_input_data, scsi_status,
|
|
response_code, sense_key, additional_sense_code, additional_sense_code_qualifier);
|
|
break;
|
|
}
|
|
|
|
sequence->is_sense_response_set = TRUE;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the sense data buffer in the user's
|
|
* sense data buffer location. Additionally, it will set the user's
|
|
* SCSI status. This is used for uncorrectable read errors.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] ata_io This parameter is a pointer to the ATA IO data used
|
|
* to get the ATA register fis.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_read_error_descriptor_sense_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
void * ata_io,
|
|
U8 scsi_status,
|
|
U8 response_code,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 * sense_data;
|
|
U32 sense_len;
|
|
U8 information_buff[8] = {0};
|
|
|
|
U8 * register_fis = sati_cb_get_d2h_register_fis_address(ata_io);
|
|
|
|
sati_scsi_get_sense_data_buffer(sequence, scsi_io, scsi_status, &sense_data, &sense_len);
|
|
|
|
information_buff[2] = sati_get_ata_lba_high_ext(register_fis);
|
|
information_buff[3] = sati_get_ata_lba_mid_ext(register_fis);
|
|
information_buff[4] = sati_get_ata_lba_low_ext(register_fis);
|
|
information_buff[5] = sati_get_ata_lba_high(register_fis);
|
|
information_buff[6] = sati_get_ata_lba_mid(register_fis);
|
|
information_buff[7] = sati_get_ata_lba_low(register_fis);
|
|
|
|
sati_set_sense_data_byte(
|
|
sense_data,
|
|
sense_len,
|
|
0,
|
|
SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE
|
|
);
|
|
|
|
sati_scsi_common_descriptor_sense_construct(
|
|
sequence,
|
|
scsi_io,
|
|
sense_data,
|
|
sense_len,
|
|
sense_key,
|
|
additional_sense_code,
|
|
additional_sense_code_qualifier,
|
|
information_buff
|
|
);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the sense data buffer in the user's
|
|
* sense data buffer location. Additionally, it will set the user's
|
|
* SCSI status. This is used for uncorrectable read errors.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] ata_io This parameter is a pointer to the ATA IO data used
|
|
* to get the ATA register fis.
|
|
* @param[in] scsi_status This parameter specifies the SCSI status
|
|
* value for the user's IO request.
|
|
* @param[in] sense_key This parameter specifies the sense key to
|
|
* be set for the user's IO request.
|
|
* @param[in] additional_sense_code This parameter specifies the
|
|
* additional sense code (ASC) key to be set for the user's
|
|
* IO request.
|
|
* @param[in] additional_sense_code_qualifier This parameter specifies
|
|
* the additional sense code qualifier (ASCQ) key to be set
|
|
* for the user's IO request.
|
|
*
|
|
* @return none
|
|
*/
|
|
static
|
|
void sati_scsi_read_error_fixed_sense_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
void * ata_io,
|
|
U8 scsi_status,
|
|
U8 response_code,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 * sense_data;
|
|
U32 sense_len;
|
|
U8 valid = TRUE;
|
|
|
|
U8 * register_fis = sati_cb_get_d2h_register_fis_address(ata_io);
|
|
|
|
sati_scsi_get_sense_data_buffer(sequence, scsi_io, scsi_status, &sense_data, &sense_len);
|
|
|
|
if(sati_get_ata_lba_mid_ext(register_fis) > 0)
|
|
{
|
|
valid = FALSE;
|
|
}
|
|
|
|
sati_set_sense_data_byte(sense_data, sense_len, 3, sati_get_ata_lba_low_ext(register_fis));
|
|
sati_set_sense_data_byte(sense_data, sense_len, 4, sati_get_ata_lba_high(register_fis));
|
|
sati_set_sense_data_byte(sense_data, sense_len, 5, sati_get_ata_lba_mid(register_fis));
|
|
sati_set_sense_data_byte(sense_data, sense_len, 6, sati_get_ata_lba_low(register_fis));
|
|
|
|
|
|
sati_set_sense_data_byte(
|
|
sense_data,
|
|
sense_len,
|
|
0,
|
|
(valid << 7) | SCSI_FIXED_CURRENT_RESPONSE_CODE
|
|
);
|
|
|
|
sati_scsi_common_fixed_sense_construct(
|
|
sense_data,
|
|
sense_len,
|
|
sense_key,
|
|
additional_sense_code,
|
|
additional_sense_code_qualifier
|
|
);
|
|
}
|
|
|
|
void sati_scsi_read_error_sense_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
void * ata_input_data,
|
|
U8 scsi_status,
|
|
U8 sense_key,
|
|
U8 additional_sense_code,
|
|
U8 additional_sense_code_qualifier
|
|
)
|
|
{
|
|
U8 response_code;
|
|
|
|
response_code = sati_scsi_get_sense_data_response_code(sequence);
|
|
|
|
switch (response_code)
|
|
{
|
|
case SCSI_FIXED_CURRENT_RESPONSE_CODE:
|
|
case SCSI_FIXED_DEFERRED_RESPONSE_CODE:
|
|
sati_scsi_read_error_fixed_sense_construct(sequence, scsi_io, ata_input_data, scsi_status,
|
|
response_code, sense_key, additional_sense_code, additional_sense_code_qualifier);
|
|
break;
|
|
case SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE:
|
|
case SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE:
|
|
sati_scsi_read_error_descriptor_sense_construct(sequence, scsi_io, ata_input_data, scsi_status,
|
|
response_code, sense_key, additional_sense_code, additional_sense_code_qualifier);
|
|
break;
|
|
}
|
|
|
|
sequence->is_sense_response_set = TRUE;
|
|
}
|
|
|
|
/*
|
|
* @brief This method builds the scsi response data for a sata task management
|
|
* request.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to construct the sense data.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to construct the sense data.
|
|
* @param[in] response_data The response status for the task management
|
|
* request.
|
|
*/
|
|
void sati_scsi_response_data_construct(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U8 response_data
|
|
)
|
|
{
|
|
#ifdef SATI_TRANSPORT_SUPPORTS_SAS
|
|
SCI_SSP_RESPONSE_IU_T * rsp_iu = (SCI_SSP_RESPONSE_IU_T*)
|
|
sati_cb_get_response_iu_address(scsi_io);
|
|
rsp_iu->data_present = 0x01;
|
|
rsp_iu->response_data_length[3] = sizeof(U32);
|
|
rsp_iu->status = 0;
|
|
((U8 *)rsp_iu->data)[3] = response_data;
|
|
#else
|
|
#endif // SATI_TRANSPORT_SUPPORTS_SAS
|
|
}
|
|
|
|
/**
|
|
* @brief This method checks to make sure that the translation isn't
|
|
* exceeding the allocation length specified in the CDB prior
|
|
* to retrieving the payload data byte from the user's buffer.
|
|
*
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to set the user payload data byte.
|
|
* @param[in] byte_offset This parameter specifies the offset into
|
|
* the user's payload buffer at which to write the supplied
|
|
* value.
|
|
* @param[in] value This parameter specifies the memory location into
|
|
* which to read the value from the user's payload buffer.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_get_data_byte(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U32 byte_offset,
|
|
U8 * value
|
|
)
|
|
{
|
|
if (byte_offset < sequence->allocation_length)
|
|
sati_cb_get_data_byte(scsi_io, byte_offset, value);
|
|
}
|
|
|
|
/**
|
|
* @brief This method checks to make sure that the translation isn't
|
|
* exceeding the allocation length specified in the CDB while
|
|
* translating payload data into the user's buffer.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to set the user payload data byte.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to set the user payload data byte.
|
|
* @param[in] byte_offset This parameter specifies the offset into
|
|
* the user's payload buffer at which to write the supplied
|
|
* value.
|
|
* @param[in] value This parameter specifies the new value to be
|
|
* written out into the user's payload buffer.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_set_data_byte(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U32 byte_offset,
|
|
U8 value
|
|
)
|
|
{
|
|
if (byte_offset < sequence->allocation_length)
|
|
{
|
|
sequence->number_data_bytes_set++;
|
|
sati_cb_set_data_byte(scsi_io, byte_offset, value);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This method checks to make sure that the translation isn't
|
|
* exceeding the allocation length specified in the CDB while
|
|
* translating payload data into the user's buffer.
|
|
*
|
|
* @param[in] sequence This parameter specifies the translation sequence
|
|
* for which to set the user payload data dword.
|
|
* @param[in,out] scsi_io This parameter specifies the user's IO request
|
|
* for which to set the user payload data dword.
|
|
* @param[in] byte_offset This parameter specifies the offset into
|
|
* the user's payload buffer at which to write the supplied
|
|
* value.
|
|
* @param[in] value This parameter specifies the new value to be
|
|
* written out into the user's payload buffer.
|
|
*
|
|
* @return none
|
|
*/
|
|
void sati_set_data_dword(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io,
|
|
U32 byte_offset,
|
|
U32 value
|
|
)
|
|
{
|
|
/// @todo Check to ensure that the bytes appear correctly (SAS Address).
|
|
|
|
sati_set_data_byte(sequence, scsi_io, byte_offset, (U8)value & 0xFF);
|
|
byte_offset++;
|
|
sati_set_data_byte(sequence, scsi_io, byte_offset, (U8)(value >> 8) & 0xFF);
|
|
byte_offset++;
|
|
sati_set_data_byte(sequence, scsi_io, byte_offset, (U8)(value >> 16) & 0xFF);
|
|
byte_offset++;
|
|
sati_set_data_byte(sequence, scsi_io, byte_offset, (U8)(value >> 24) & 0xFF);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA flush cache command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the FLUSH CACHE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_flush_cache_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_FLUSH_CACHE);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA standby immediate command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the STANDBY IMMEDIATE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @param[in] count This parameter specifies the time period programmed
|
|
* into the Standby Timer. See ATA8 spec for more details
|
|
* @return none.
|
|
*/
|
|
void sati_ata_standby_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
U16 count
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_STANDBY);
|
|
sati_set_ata_sector_count(register_fis, count);
|
|
|
|
sequence->device->ata_standby_timer = (U8) count;
|
|
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA standby immediate command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the STANDBY IMMEDIATE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_standby_immediate_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_STANDBY_IMMED);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA idle immediate command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the IDLE IMMEDIATE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_idle_immediate_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_IDLE_IMMED);
|
|
sati_set_ata_features(register_fis, 0x00);
|
|
sati_set_ata_sector_count(register_fis, 0x00);
|
|
sati_set_ata_lba_high(register_fis, 0x00);
|
|
sati_set_ata_lba_mid(register_fis, 0x00);
|
|
sati_set_ata_lba_low(register_fis, 0x00);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA idle immediate command
|
|
for Unload Features.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the IDLE IMMEDIATE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_idle_immediate_unload_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_IDLE_IMMED);
|
|
sati_set_ata_features(register_fis, 0x44);
|
|
sati_set_ata_sector_count(register_fis, 0x00);
|
|
sati_set_ata_lba_high(register_fis, 0x55);
|
|
sati_set_ata_lba_mid(register_fis, 0x4E);
|
|
sati_set_ata_lba_low(register_fis, 0x4C);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA IDLE command.\
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the ATA IDLE command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_idle_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_IDLE);
|
|
sati_set_ata_features(register_fis, 0x00);
|
|
sati_set_ata_sector_count(register_fis, 0x00);
|
|
|
|
sequence->device->ata_standby_timer = 0x00;
|
|
|
|
sati_set_ata_lba_high(register_fis, 0x00);
|
|
sati_set_ata_lba_mid(register_fis, 0x00);
|
|
sati_set_ata_lba_low(register_fis, 0x00);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct the ATA MEDIA EJECT command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the MEDIA EJCT command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_media_eject_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_MEDIA_EJECT);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This method will construct the ATA read verify sector(s) command.
|
|
*
|
|
* @pre It is expected that the user has properly set the current contents
|
|
* of the register FIS to 0.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the ATA READ VERIFY SECTOR(S) command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
*
|
|
* @return none.
|
|
*/
|
|
void sati_ata_read_verify_sectors_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_READ_VERIFY_SECTORS);
|
|
|
|
//According to SAT-2 (v7) 9.11.3
|
|
sati_set_ata_sector_count(register_fis, 1);
|
|
|
|
//According to SAT-2 (v7) 9.11.3, set LBA to a value between zero and the
|
|
//maximum LBA supported by the ATA device in its current configuration.
|
|
//From the unit test, it seems we have to set LBA to a non-zero value.
|
|
sati_set_ata_lba_low(register_fis, 1);
|
|
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct a ATA SMART Return Status command so the
|
|
* status of the ATA device can be returned. The status of the SMART
|
|
* threshold will be returned by this command.
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_smart_return_status_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
U8 feature_value
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_SMART);
|
|
|
|
sati_set_ata_features(register_fis, feature_value);
|
|
|
|
sati_set_ata_lba_high(register_fis, 0xC2);
|
|
sati_set_ata_lba_mid(register_fis, 0x4F);
|
|
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct a ATA SMART Return Status command so the
|
|
* status of the ATA device can be returned. The status of the SMART
|
|
* threshold will be returned by this command.
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_smart_read_log_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
U8 log_address,
|
|
U32 transfer_length
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_SMART);
|
|
sati_set_ata_features(register_fis, ATA_SMART_SUB_CMD_READ_LOG);
|
|
|
|
sati_set_ata_lba_high(register_fis, 0xC2);
|
|
sati_set_ata_lba_mid(register_fis, 0x4F);
|
|
sati_set_ata_lba_low(register_fis, log_address);
|
|
|
|
sequence->data_direction = SATI_DATA_DIRECTION_IN;
|
|
sequence->protocol = SAT_PROTOCOL_PIO_DATA_IN;
|
|
sequence->ata_transfer_length = transfer_length;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct a Write Uncorrectable ATA command that
|
|
* will write one sector with a psuedo or flagged error. The type of
|
|
* error is specified by the feature value.
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_write_uncorrectable_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
U8 feature_value
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_WRITE_UNCORRECTABLE);
|
|
sati_set_ata_features(register_fis, feature_value);
|
|
sati_set_ata_sector_count(register_fis, 0x0001);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct a Mode Select ATA SET FEATURES command
|
|
* For example, Enable/Disable Write Cache, Enable/Disable Read Ahead
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_set_features_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
U8 feature
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_SET_FEATURES);
|
|
sati_set_ata_features(register_fis, feature);
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* @brief This method will construct a Read Log ext ATA command that
|
|
* will request a log page based on the log_address.
|
|
*
|
|
* @param[in] log_address This parameter specifies the log page
|
|
* to be returned from Read Log Ext.
|
|
*
|
|
* @param[in] transfer_length This parameter specifies the size of the
|
|
* log page response returned by Read Log Ext.
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_read_log_ext_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
U8 log_address,
|
|
U32 transfer_length
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_READ_LOG_EXT);
|
|
|
|
sati_set_ata_lba_low(register_fis, log_address);
|
|
sati_set_ata_lba_mid(register_fis, 0x00);
|
|
sati_set_ata_lba_mid_exp(register_fis, 0x00);
|
|
|
|
sati_set_ata_sector_count(register_fis, 0x01);
|
|
|
|
sequence->data_direction = SATI_DATA_DIRECTION_IN;
|
|
sequence->protocol = SAT_PROTOCOL_PIO_DATA_IN;
|
|
sequence->ata_transfer_length = transfer_length;
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief This method will check if the ATA device is in the stopped power
|
|
* state. This is used for all medium access commands for SAT
|
|
* compliance. See SAT2r07 section 9.11.1
|
|
*
|
|
* @param[in] sequence - SATI sequence data with the device state.
|
|
*
|
|
* @return TRUE If device is stopped
|
|
*
|
|
*/
|
|
BOOL sati_device_state_stopped(
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
void * scsi_io
|
|
)
|
|
{
|
|
if(sequence->device->state == SATI_DEVICE_STATE_STOPPED)
|
|
{
|
|
sati_scsi_sense_data_construct(
|
|
sequence,
|
|
scsi_io,
|
|
SCSI_STATUS_CHECK_CONDITION,
|
|
SCSI_SENSE_NOT_READY ,
|
|
SCSI_ASC_INITIALIZING_COMMAND_REQUIRED,
|
|
SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED
|
|
);
|
|
return TRUE;
|
|
}
|
|
return FALSE;
|
|
}
|
|
|
|
/**
|
|
* @brief This method will construct a ATA Read Buffer command that
|
|
* will request PIO in data containing the target device's buffer.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the ATA READ VERIFY SECTOR(S) command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_read_buffer_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_READ_BUFFER);
|
|
sequence->data_direction = SATI_DATA_DIRECTION_IN;
|
|
sequence->protocol = SAT_PROTOCOL_PIO_DATA_IN;
|
|
sequence->ata_transfer_length = 512;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This method will construct a ATA Write Buffer command that
|
|
* will send PIO out data to the target device's buffer.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the ATA READ VERIFY SECTOR(S) command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_write_buffer_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
|
|
sati_set_ata_command(register_fis, ATA_WRITE_BUFFER);
|
|
|
|
sequence->data_direction = SATI_DATA_DIRECTION_OUT;
|
|
sequence->protocol = SAT_PROTOCOL_PIO_DATA_OUT;
|
|
sequence->ata_transfer_length = 512;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This method will construct a ATA Download Microcode command that
|
|
* will send PIO out data containing new firmware for the target drive.
|
|
*
|
|
* @param[out] ata_io This parameter specifies the ATA IO request structure
|
|
* for which to build the ATA READ VERIFY SECTOR(S) command.
|
|
* @param[in] sequence This parameter specifies the translator sequence
|
|
* for which the command is being constructed.
|
|
* @param[in] mode This parameter specifies the download microcode sub-command
|
|
* code.
|
|
* @param[in] allocation_length This parameter specifies the number of bytes
|
|
* being sent to the target device.
|
|
* @param[in] buffer_offset This parameter specifies the buffer offset for the
|
|
* data sent to the target device.
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
void sati_ata_download_microcode_construct(
|
|
void * ata_io,
|
|
SATI_TRANSLATOR_SEQUENCE_T * sequence,
|
|
U8 mode,
|
|
U32 allocation_length,
|
|
U32 buffer_offset
|
|
)
|
|
{
|
|
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
|
|
U32 allocation_blocks = allocation_length >> 9;
|
|
U32 buffer_blkoffset = buffer_offset >> 9;
|
|
|
|
sati_set_ata_command(register_fis, ATA_DOWNLOAD_MICROCODE);
|
|
sati_set_ata_features(register_fis, mode);
|
|
|
|
if(mode == ATA_MICROCODE_DOWNLOAD_SAVE)
|
|
{
|
|
sati_set_ata_sector_count(register_fis, (U8) (allocation_length >> 9));
|
|
sati_set_ata_lba_low(register_fis, (U8) (allocation_length >> 17));
|
|
}
|
|
else //mode == 0x03
|
|
{
|
|
sati_set_ata_sector_count(register_fis, (U8) (allocation_blocks & 0xff));
|
|
sati_set_ata_lba_low(register_fis, (U8) ((allocation_blocks >> 8) & 0xff));
|
|
sati_set_ata_lba_mid(register_fis, (U8) (buffer_blkoffset & 0xff));
|
|
sati_set_ata_lba_high(register_fis, (U8) ((buffer_blkoffset >> 8) & 0xff));
|
|
}
|
|
|
|
if((allocation_length == 0) && (buffer_offset == 0))
|
|
{
|
|
sati_ata_non_data_command(ata_io, sequence);
|
|
}
|
|
else
|
|
{
|
|
sequence->data_direction = SATI_DATA_DIRECTION_OUT;
|
|
sequence->protocol = SAT_PROTOCOL_PIO_DATA_OUT;
|
|
sequence->ata_transfer_length = allocation_length;
|
|
}
|
|
}
|