freebsd-skq/contrib/libpam/doc/pam_appl.sgml

<!doctype linuxdoc system>

<!--

 $Id: pam_appl.sgml,v 1.16 1997/04/05 06:49:14 morgan Exp morgan $

    Copyright (C) Andrew G. Morgan 1996, 1997.  All rights reserved.

Redistribution and use in source (sgml) and binary (derived) forms,
with or without modification, are permitted provided that the
following conditions are met:

1. Redistributions of source code must retain the above copyright
   notice, and the entire permission notice in its entirety,
   including the disclaimer of warranties.

2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote
   products derived from this software without specific prior
   written permission.

ALTERNATIVELY, this product may be distributed under the terms of the
GNU General Public License, in which case the provisions of the GNU
GPL are required INSTEAD OF the above restrictions.  (This clause is
necessary due to a potential bad interaction between the GNU GPL and
the restrictions contained in a BSD-style copyright.)

THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.

 -->

<article>

<title>The Linux-PAM Application Developers' Guide
<author>Andrew G. Morgan, <tt>morgan@linux.kernel.org</tt>
<date>DRAFT v0.63 1998/1/18
<abstract>
This manual documents what an application developer needs to know
about the <bf>Linux-PAM</bf> library. It describes how an application
might use the <bf>Linux-PAM</bf> library to authenticate users. In
addition it contains a description of the funtions to be found in
<tt/libpam_misc/ library, that can be used in general applications.
Finally, it contains some comments on PAM related security issues for
the application developer.
</abstract>

<toc>

<sect>Introduction

<sect1>Synopsis

<p>
For general applications that wish to use the services provided by
<bf/Linux-PAM/ the following is a summary of the relevant linking
information:
<tscreen>
<verb>
#include <security/pam_appl.h>

cc -o application .... -lpam
</verb>
</tscreen>

<p>
In addition to <tt/libpam/, there is a library of miscellaneous
functions that make the job of writing <em/PAM-aware/ applications
easier (this library is not covered in the DCE-RFC for PAM and is
specific to the Linux-PAM distribution):
<tscreen>
<verb>
...
#include <security/pam_misc.h>

cc -o application .... -lpam -lpam_misc
</verb>
</tscreen>

<sect1> Description

<p>
<bf>Linux-PAM</bf> (Pluggable Authentication Modules for Linux) is a
library that enables the local system administrator to choose how
individual applications authenticate users.  For an overview of the
<bf>Linux-PAM</bf> library see the <bf/Linux-PAM/ System
Administrators' Guide.

<p>
It is the purpose of the <bf>Linux-PAM</bf> project to liberate the
development of privilege granting software from the development of
secure and appropriate authentication schemes.  This is accomplished
by providing a documented library of functions that an application may
use for all forms of user authentication management. This library
dynamically loads locally configured authentication modules that
actually perform the authentication tasks.

<p>
From the perspective of an application developer the information
contained in the local configuration of the PAM library should not be
important.  Indeed it is intended that an application treat the
functions documented here as a ``black box'' that will deal with all
aspects of user authentication. ``All aspects'' includes user
verification, account management, session initialization/termination
and also the resetting of passwords (<em/authentication tokens/).

<sect>Overview

<p>
Most service-giving applications are restricted.  In other words,
their service is not available to all and every prospective client.
Instead, the applying client must jump through a number of hoops to
convince the serving application that they are authorized to obtain
service.

The process of <em/authenticating/ a client is what PAM is designed to
manage.  In addition to authentication, PAM provides account
management, credential management, session management and
authentication-token (password changing) management services.  It is
important to realize when writing a PAM based application that these
services are provided in a manner that is <bf>transparent</bf> to the
the application.  That is to say, when the application is written, no
assumptions can be made about <em>how</em> the client will be
authenticated.

<p>
The process of authentication is performed by the PAM library via a
call to <tt>pam_authenticate()</tt>.  The return value of this
function will indicate whether a named client (the <em>user</em>) has
been authenticated.  If the PAM library needs to prompt the user for
any information, such as their <em>name</em> or a <em>password</em>
then it will do so.  If the PAM library is configured to authenticate
the user using some silent protocol, it will do this too.  (This
latter case might be via some hardware interface for example.)

<p>
It is important to note that the application must leave all decisions
about when to prompt the user at the discretion of the PAM library.

<p>
The PAM library, however, must work equally well for different styles
of application.  Some applications, like the familiar <tt>login</tt>
and <tt>passwd</tt> are terminal based applications, exchanges of
information with the client in these cases is as plain text messages.
Graphically based applications, however, have a more sophisticated
interface.  They generally interact with the user via specially
constructed dialogue boxes.  Additionally, network based services
require that text messages exchanged with the client are specially
formatted for automated processing: one such example is <tt>ftpd</tt>
which prefixes each exchanged message with a numeric identifier.

<p>
The presentation of simple requests to a client is thus something very
dependent on the protocol that the serving application will use.  In
spite of the fact that PAM demands that it drives the whole
authentication process, it is not possible to leave such protocol
subtleties up to the PAM library.  To overcome this potential problem,
the application provides the PAM library with a <em>conversation</em>
function.  This function is called from <bf>within</bf> the PAM
library and enables the PAM to directly interact with the client.  The
sorts of things that this conversation function must be able to do are
prompt the user with text and/or obtain textual input from the user
for processing by the PAM library.  The details of this function are
provided in a later section.

<p>
For example, the conversation function may be called by the PAM library
with a request to prompt the user for a password.  Its job is to
reformat the prompt request into a form that the client will
understand.  In the case of <tt>ftpd</tt>, this will involve prefixing
the string with the number <tt>331</tt> and sending the request over
the network to a connected client.  The conversation function will
then obtain any reply and, after extracting the typed password, will
return this string of text to the PAM library.  Similar concerns need
to be addressed in the case of an X-based graphical server.

<p>
There are a number of issues that need to be addressed when one is
porting an existing application to become PAM compliant.  A section
below has been devoted to this: Porting legacy applications.

<p>
Besides authentication, PAM provides other forms of management.
Session management is provided with calls to
<tt>pam_open_session()</tt> and <tt>pam_close_session()</tt>.  What
these functions actually do is up to the local administrator.  But
typically, they could be used to log entry and exit from the system or
for mounting and unmounting the user's home directory.  If an
application provides continuous service for a period of time, it
should probably call these functions, first open after the user is
authenticated and then close when the service is terminated.

<p>
Account management is another area that an application developer
should include with a call to <tt/pam_acct_mgmt()/.  This call will
perform checks on the good health of the user's account (has it
expired etc.). One of the things this function may check is whether
the user's authentication token has expired - in such a case the
application may choose to attempt to update it with a call to
<tt/pam_chauthtok()/, although some applications are not suited to
this task (<em>ftp</em> for example) and in this case the application
should deny access to the user.

<p>
PAM is also capable of setting and deleting the users credentials with
the call <tt>pam_setcred()</tt>.  This function should always be
called after the user is authenticated and before service is offered
to the user.  By convention, this should be the last call to the PAM
library before service is given to the user.  What exactly a
credential is, is not well defined.  However, some examples are given
in the glossary below.

<sect>The public interface to <bf>Linux-PAM</bf>
 
<p>
Firstly, the relevant include file for the <bf>Linux-PAM</bf> library
is <tt>&lt;security/pam_appl.h&gt;</tt>. It contains the definitions
for a number of functions. After listing these functions, we collect
some guiding remarks for programmers.

<sect1>What can be expected by the application

<p>
Here we document those functions in the <bf/Linux-PAM/ library that
may be called from an application.

<sect2>Initialization of Linux-PAM
<label id="pam-start-section">

<p>
<tscreen>
<verb>
extern int pam_start(const char *service_name, const char *user,
		     const struct pam_conv *pam_conversation,
		     pam_handle_t **pamh);
</verb>
</tscreen>

<p>
This is the first of the <bf>Linux-PAM</bf> functions that must be
called by an application. It initializes the interface and reads the
system configuration file, <tt>/etc/pam.conf</tt> (see the
<bf/Linux-PAM/ System Administrators' Guide).  Following a successful
return (<tt/PAM_SUCCESS/) the contents of <tt/*pamh/ is a handle that
provides continuity for successive calls to the <bf/Linux-PAM/
library.  The arguments expected by <tt/pam_start/ are as follows: the
<tt/service_name/ of the program, the <tt/user/name of the individual
to be authenticated, a pointer to an application-supplied
<tt/pam_conv/ structure and a pointer to a <tt/pam_handle_t/
<em/pointer/.

<p>
The <tt>pam_conv</tt> structure is discussed more fully in the section
<ref id="the-conversation-function" name="below">.  The
<tt>pam_handle_t</tt> is a <em>blind</em> structure and the
application should not attempt to probe it directly for information.
Instead the <bf>Linux-PAM</bf> library provides the functions
<tt>pam_set_item</tt> and <tt>pam_get_item</tt>.  These functions are
documented below.

<sect2>Termination of the library
<label id="pam-end-section">

<p>
<tscreen>
<verb>
extern int pam_end(pam_handle_t *pamh, int pam_status);
</verb>
</tscreen>

<p>
This function is the last function an application should call in the
<bf>Linux-PAM</bf> library.  Upon return the handle <tt/pamh/ is no
longer valid and all memory associated with it will be invalid (likely
to cause a segmentation fault if accessed).

<p>
Under normal conditions the argument <tt/pam_status/ has the value
PAM_SUCCESS, but in the event of an unsuccessful service application
the approprite <bf/Linux-PAM/ error-return value should be used
here.
attempt its purpose is to be passed as an argument to the
module specific function <tt/cleanup()/ (see the <bf/Linux-PAM/
<htmlurl url="pam_modules.html" name="Module Developers' Guide">).

<sect2>Setting PAM items
<label id="pam-set-item-section">

<p>
<tscreen>
<verb>
extern int pam_set_item(pam_handle_t *pamh, int item_type,
			const void *item);
</verb>
</tscreen>

<p>This function is used to (re)set the value of one of the following
<bf/item_type/s:

<p><descrip>
<tag><tt/PAM_SERVICE/</tag>
     	The service name

<tag><tt/PAM_USER/</tag>
	The user name

<tag><tt/PAM_TTY/</tag>
	The terminal name: prefixed by <tt>/dev/</tt> if it is a
device file; for graphical, X-based, applications the value for this
item should be the <tt/&dollar;DISPLAY/ variable.

<tag><tt/PAM_RHOST/</tag>
	The remote host name

<tag><tt/PAM_CONV/</tag>
	The conversation structure (see section <ref
id="the-conversation-function" name="below">)

<tag><tt/PAM_RUSER/</tag>
	The remote user name

<tag><tt/PAM_USER_PROMPT/</tag>
	The string used when prompting for a user's name. The default
value for this string is ``Please enter username: ''.

</descrip>

<p>
For all <tt/item_type/s, other than <tt/PAM_CONV/, <tt/item/ is a
pointer to a <tt>&lt;NUL&gt;</tt> terminated character string.  In the
case of <tt/PAM_CONV/, <tt/item/ points to an initialized
<tt/pam_conv/ structure (see section <ref
id="the-conversation-function" name="below">).

<p>
A successful call to this function returns <tt/PAM_SUCCESS/.  However,
the application should expect one of the following errors:

<p>
<descrip>
<tag><tt/PAM_PERM_DENIED/</tag>
	An attempt was made to replace the conversation structure with
a <tt/NULL/ value.
<tag><tt/PAM_BUF_ERR/</tag>
	The function ran out of memory making a copy of the item.
<tag><tt/PAM_BAD_ITEM/</tag>
	The application attempted to set an undefined item.
</descrip>

<sect2>Getting PAM items
<label id="pam-get-item-section">

<p>
<tscreen>
<verb>
extern int pam_get_item(const pam_handle_t *pamh, int item_type,
			const void **item);
</verb>
</tscreen>

<p>
This function is used to obtain the value of the indicated
<tt/item_type/.  Upon successful return, <tt/*item/ contains a pointer
to the value of the corresponding item.  Note, this is a pointer to
the <em/actual/ data and should <em/not/ be <tt/free()/'ed or
over-written!  A successful call is signaled by a return value of
<tt/PAM_SUCCESS/.  If an attempt is made to get an undefined item,
<tt/PAM_BAD_ITEM/ is returned.

<sect2>Understanding errors
<label id="pam-strerror-section">

<p>
<tscreen>
<verb>
extern const char *pam_strerror(pam_handle_t *pamh, int errnum);
</verb>
</tscreen>

<p>
This function returns some text describing the <bf>Linux-PAM</bf>
error associated with the argument <tt/errnum/.  If the error is not
recognized ``<tt/Unknown Linux-PAM error/'' is returned.

<sect2>Planning for delays

<p>
<tscreen>
<verb>
extern int pam_fail_delay(pam_handle_t *pamh, unsigned int micro_sec);
</verb>
</tscreen>

<p>
This function is offered by <bf/Linux-PAM/ to facilitate time delays
following a failed call to <tt/pam_authenticate()/ and before control
is returned to the application. When using this function the
application programmer should check if it is available with,
<tscreen>
<verb>
#ifdef HAVE_PAM_FAIL_DELAY
    ....
#endif /* HAVE_PAM_FAIL_DELAY */
</verb>
</tscreen>


<p>
Generally, an application requests that a user is authenticated by
<bf/Linux-PAM/ through a call to <tt/pam_authenticate()/ or
<tt/pam_chauthtok()/.  These functions calls each of the <em/stacked/
authentication modules listed in the <tt>/etc/pam.conf</tt> file.  As
directed by this file, one of more of the modules may fail causing the
<tt/pam_...()/ call to return an error.  It is desirable for there to
also be a pause before the application continues. The principal reason
for such a delay is security: a delay acts to discourage <em/brute
force/ dictionary attacks primarily, but also helps hinder
<em/timed/ (covert channel) attacks.

<p>
The <tt/pam_fail_delay()/ function provides the mechanism by which an
application or module can suggest a minimum delay (of <tt/micro_sec/
<em/micro-seconds/). <bf/Linux-PAM/ keeps a record of the longest time
requested with this function. Should <tt/pam_authenticate()/ fail,
the failing return to the application is delayed by an amount of time
randomly distributed (by up to 25%) about this longest value.

<p>
Independent of success, the delay time is reset to its zero default
value when <bf/Linux-PAM/ returns control to the application.

<sect2>Authenticating the user

<p>
<tscreen>
<verb>
extern int pam_authenticate(pam_handle_t *pamh, int flags);
</verb>
</tscreen>

<p>
This function serves as an interface to the authentication mechanisms
of the loaded modules.  The single <em/optional/ flag, which may be
logically OR'd with <tt/PAM_SILENT/, takes the following value,

<p><descrip>

<tag><tt/PAM_DISALLOW_NULL_AUTHTOK/</tag>
	Instruct the authentication modules to return
<tt/PAM_AUTH_ERR/ if the user does not have a registered
authorization token---it is set to <tt/NULL/ in the system database.
</descrip>

<p>
The value returned by this function is one of the following:

<p><descrip>

<tag><tt/PAM_AUTH_ERR/</tag>
	The user was not authenticated
<tag><tt/PAM_CRED_INSUFFICIENT/</tag>
	For some reason the application does not have sufficient
credentials to authenticate the user.
<tag><tt/PAM_AUTHINFO_UNAVAIL/</tag>
	The modules were not able to access the authentication
information. This might be due to a network or hardware failure etc.
<tag><tt/PAM_USER_UNKNOWN/</tag>
	The supplied username is not known to the authentication
service
<tag><tt/PAM_MAXTRIES/</tag>
	One or more of the authentication modules has reached its
limit of tries authenticating the user. Do not try again.

</descrip>

<p>
If one or more of the authentication modules fails to load, for
whatever reason, this function will return <tt/PAM_ABORT/.

<sect2>Setting user credentials
<label id="pam-setcred-section">

<p>
<tscreen>
<verb>
extern int pam_setcred(pam_handle_t *pamh, int flags);
</verb>
</tscreen>

<p>
This function is used to set the module-specific credentials of the
user.  It is usually called after the user has been authenticated,
after the account management function has been called and after a
session has been opened for the user.

<p>
A credential is something that the user possesses.  It is some
property, such as a <em>Kerberos</em> ticket, or a supplementary group
membership that make up the uniqueness of a given user.  On a Linux
(or UN*X system) the user's <tt>UID</tt> and <tt>GID</tt>'s are
credentials too.  However, it has been decided that these properties
(along with the default supplementary groups of which the user is a
member) are credentials that should be set directly by the application
and not by PAM.

<p>
This function simply calls the <tt/pam_sm_setcred/ functions of each
of the loaded modules.  Valid <tt/flags/, any one of which, may be
logically OR'd with <tt/PAM_SILENT/, are:

<p><descrip>
<tag><tt/PAM_ESTABLISH_CRED/</tag>
	Set the credentials for the authentication service,
<tag><tt/PAM_DELETE_CRED/</tag>
	Delete the credentials associated with the authentication service,
<tag><tt/PAM_REINITIALIZE_CRED/</tag>
	Reinitialize the user credentials, and
<tag><tt/PAM_REFRESH_CRED/</tag>
	Extend the lifetime of the user credentials.
</descrip>

<p>
A successful return is signalled with <tt/PAM_SUCCESS/. Errors that
are especially relevant to this function are the following:

<p><descrip>
<tag><tt/PAM_CRED_UNAVAIL/</tag>
	A module cannot retrieve the user's credentials.
<tag><tt/PAM_CRED_EXPIRED/</tag>
	The user's credentials have expired.
<tag><tt/PAM_USER_UNKNOWN/</tag>
	The user is not known to an authentication module.
<tag><tt/PAM_CRED_ERR/</tag>
	A module was unable to set the credentials of the user.
</descrip>

<sect2>Account management

<p>
<tscreen>
<verb>
extern int pam_acct_mgmt(pam_handle_t *pamh, int flags);
</verb>
</tscreen>

<p>
This function is typically called after the user has been
authenticated.  It establishes whether the user's account is healthy.
That is to say, whether the user's account is still active and whether
the user is permitted to gain access to the system at this time.
Valid flags, any one of which, may be logically OR'd with
<tt/PAM_SILENT/, and are the same as those applicable to the
<tt/flags/ argument of <tt/pam_authenticate/.

<p>
This function simply calls the corresponding functions of each of the
loaded modules, as instructed by the configuration file,
<tt>/etc/pam.conf</tt>.

<p>
The normal response from this function is <tt/PAM_SUCCESS/, however,
specific failures are indicated by the following error returns:

<descrip>
<tag><tt/PAM_AUTHTOKEN_REQD/</tag>
The user <bf/is/ valid but their authentication token has
<em/expired/.  The correct response to this return-value is to require
that the user satisfies the <tt/pam_chauthtok()/ function before
obtaining service.  It may not be possible for some applications to do
this.  In such cases, the user should be denied access until such time
as they can update their password.

<tag><tt/PAM_ACCT_EXPIRED/</tag>
	The user is no longer permitted access to the system.
<tag><tt/PAM_AUTH_ERR/</tag>
	There was an authentication error.

<tag><tt/PAM_PERM_DENIED/</tag>
	The user is not permitted to gain access at this time.
<tag><tt/PAM_USER_UNKNOWN/</tag>
	The user is not known to a module's account management
component.

</descrip>

<sect2>Updating authentication tokens
<label id="pam-chauthtok-section">

<p>
<tscreen>
<verb>
extern int pam_chauthtok(pam_handle_t *pamh, const int flags);
</verb>
</tscreen>

<p>
This function is used to change the authentication token for a given
user (as indicated by the state associated with the handle,
<tt/pamh/). The following is a valid but optional flag which may be
logically OR'd with <tt/PAM_SILENT/,

<descrip>
<tag><tt/PAM_CHANGE_EXPIRED_AUTHTOK/</tag>
	This argument indicates to the modules that the users
authentication token (password) should only be changed if it has
expired.
</descrip>

<p>
Note, if this argument is not passed, the application requires that
<em/all/ authentication tokens are to be changed.

<p>
<tt/PAM_SUCCESS/ is the only successful return value, valid
error-returns are:

<descrip>
<tag><tt/PAM_AUTHTOK_ERR/</tag>
	A module was unable to obtain the new authentication token.
	
<tag><tt/PAM_AUTHTOK_RECOVERY_ERR/</tag>
	A module was unable to obtain the old authentication token.

<tag><tt/PAM_AUTHTOK_LOCK_BUSY/</tag>
	One or more of the modules was unable to change the
authentication token since it is currently locked.
	
<tag><tt/PAM_AUTHTOK_DISABLE_AGING/</tag>
	Authentication token aging has been disabled for at least one
of the modules.

<tag><tt/PAM_PERM_DENIED/</tag>
	Permission denied.

<tag><tt/PAM_TRY_AGAIN/</tag>
	Not all of the modules were in a position to update the
authentication token(s). In such a case none of the user's
authentication tokens are updated.

<tag><tt/PAM_USER_UNKNOWN/</tag>
	The user is not known to the authentication token changing
service.

</descrip>

<sect2>Session initialization
<label id="pam-open-session-section">

<p>
<tscreen>
<verb>
extern int pam_open_session(pam_handle_t *pamh, int flags);
</verb>
</tscreen>

<p>
This function is used to indicate that an authenticated session has
begun.  It is used to inform the module that the user is currently in
a session.  It should be possible for the <bf>Linux-PAM</bf> library
to open a session and close the same session (see section <ref
id="pam-close-session-section" name="below">) from different
applications.

<p>
Currently, this function simply calls each of the corresponding
functions of the loaded modules. The only valid flag is
<tt/PAM_SILENT/ and this is, of course, <em/optional/.

<p>
If any of the <em/required/ loaded modules are unable to open a
session for the user, this function will return <tt/PAM_SESSION_ERR/.

<sect2>Terminating sessions
<label id="pam-close-session-section">

<p>
<tscreen>
<verb>
extern int pam_close_session(pam_handle_t *pamh, int flags);
</verb>
</tscreen>

<p>
This function is used to indicate that an authenticated session has
ended. It is used to inform the module that the user is exiting a
session. It should be possible for the <bf>Linux-PAM</bf> library to
open a session and close the same session from different applications.

<p>
Currently, this function simply calls each of the corresponding
functions of the loaded modules.  The only valid flag is
<tt/PAM_SILENT/ and this is, of course, <em/optional/.

<p>
If any of the <em/required/ loaded modules are unable to close a
session for the user, this function will return <tt/PAM_SESSION_ERR/.

<sect2>Setting PAM environment variables
<label id="pam-putenv-section">

<p>
<tscreen>
<verb>
extern int pam_putenv(pam_handle_t *pamh, const char *name_value);
</verb>
</tscreen>

<p>
<em>
Warning, the environment support in <bf/Linux-PAM/ is based solely
on a six line email from the developers at Sun. Its interface is
likely to be generally correct, however, the details are likely to be
changed as more information becomes available.
</em>

<p>
This function attempts to (re)set a <bf/Linux-PAM/ environment
variable. The <tt/name_value/ argument is a single <tt/NUL/ terminated
string of one of the following forms:
<descrip>
<tag>``<tt/NAME=value of variable/''</tag>

In this case the environment variable of the given <tt/NAME/ is set to
the indicated value: ``<tt/value of variable/''.  If this variable is
already known, it is overwritten. Otherwise it is added to the
<bf/Linux-PAM/ environment.

<tag>``<tt/NAME=/''</tag>

This function sets the variable to an empty value. It is listed
separately to indicate that this is the correct way to achieve such a
setting.

<tag>``<tt/NAME/''</tag>

Without an `<tt/=/' the <tt/pam_putenv()/ function will delete the
correspoding variable from the <bf/Linux-PAM/ environment.

</descrip>

<p>
Success is indicated with a return value of <tt/PAM_SUCCESS/. Failure
is indicated by one of the following returns:

<descrip>
<tag><tt/PAM_PERM_DENIED/</tag>
	name given is a <tt/NULL/ pointer

<tag><tt/PAM_BAD_ITEM/</tag>
	variable requested (for deletion) is not currently set

<tag><tt/PAM_ABORT/</tag>
	the <bf/Linux-PAM/ handle, <tt/pamh/, is corrupt

<tag><tt/PAM_BUF_ERR/</tag>
	failed to allocate memory when attempting update

</descrip>

<sect2>Getting a PAM environment variable
<label id="pam-getenv-section">

<p>
<tscreen>
<verb>
extern const char *pam_getenv(pam_handle_t *pamh, const char *name);
</verb>
</tscreen>

<p>
<em>
Warning, the environment support in <bf/Linux-PAM/ is based solely
on a six-line email from the developers at Sun. Its interface is
likely to be generally correct, however, the details are likely to be
changed as more information becomes available.
</em>

<p>
Obtain the value of the indicated <bf/Linux-PAM/ environment
variable. On error, internal failure or the unavailability of the
given variable (unspecified), this function simply returns <tt/NULL/.

<sect2>Getting the PAM environment
<label id="pam-getenvlist-section">

<p>
<tscreen>
<verb>
extern const char * const *pam_getenvlist(pam_handle_t *pamh);
</verb>
</tscreen>

<p>
<em>
Warning, the environment support in <bf/Linux-PAM/ is based solely
on a six line email from the developers at Sun. Its interface is
likely to be generally correct, however, the details are likely to be
changed as more information becomes available.
</em>

<p>
This function returns a pointer to the complete <tt/Linux-PAM/
environment.  It is a pointer to a <em/read-only/ list of
<em/read-only/ environment variables.  It should be noted that this
memory will become invalid after a call to <tt/pam_end()/ (see the
section <ref id="pam-end-section" name="above">).  If application
wishes to make use of this list after such a call, it should first
make a copy of all the set variables. (A function that performs such a
transcription is to be found in <tt/libpam_misc/.)

<sect1>What is expected of an application

<sect2>The conversation function
<label id="the-conversation-function">

<p>
An application must provide a ``conversation function''. It is used
for direct communication between a loaded module and the application
and will typically provide a means for the module to prompt the user
for a password etc. . The structure, <tt/pam_conv/, is defined by
including <tt>&lt;security/pam_appl.h&gt</tt>; to be,

<p>
<tscreen>
<verb>
struct pam_conv {
    int (*conv)(int num_msg,
        const struct pam_message **msg,
        struct pam_response **resp,
        void *appdata_ptr);
    void *appdata_ptr;
};
</verb>
</tscreen>

<p>
It is initialized by the application before it is passed to the
library.  The <em/contents/ of this structure are attached to the
<tt/*pamh/ handle.  The point of this argument is to provide a
mechanism for any loaded module to interact directly with the
application program. This is why it is called a <em/conversation/
structure.

<p>
When a module calls the referenced <tt/conv()/ function, the argument
<tt/*appdata_ptr/ is set to the second element of this structure.

<p>
The other arguments of a call to <tt/conv()/ concern the information
exchanged by module and application. That is to say, <tt/num_msg/
holds the length of the array of pointers, <tt/msg/. After a
successful return, the pointer <tt/*resp/ points to an array of
<tt/pam_response/ structures, holding the application supplied text.
Note, <tt/*resp/ is an <tt/struct pam_response/ array and <em/not/ an
array of pointers.

<p>
The message (from the module to the application) passing structure is
defined by <tt>&lt;security/pam_appl.h&gt;</tt> as:

<p>
<tscreen>
<verb>
struct pam_message {
    int msg_style;
    const char *msg;
};
</verb>
</tscreen>

<p>
Valid choices for <tt/msg_style/ are:

<p><descrip>
<tag><tt/PAM_PROMPT_ECHO_OFF/</tag>
	Obtain a string without echoing any text
<tag><tt/PAM_PROMPT_ECHO_ON/</tag>
	Obtain a string whilst echoing text
<tag><tt/PAM_ERROR_MSG/</tag>
	Display an error
<tag><tt/PAM_TEXT_INFO/</tag>
	Display some text.
</descrip>

<p>
The point of having an array of messages is that it becomes possible
to pass a number of things to the application in a single call from
the module. It can also be convenient for the application that related
things come at once: a windows based application can then present a
single form with many messages/prompts on at once.

<p>
The response (from the application to the module) passing structure is
defined by including <tt>&lt;security/pam_appl.h&gt;</tt> as:

<p><tscreen><verb>
struct pam_response {
    char *resp;
    int resp_retcode;
};
</verb></tscreen>

<p>
Currently, there are no definitions for <tt/resp_retcode/ values; the
normal value is <tt/0/.

<p>
Prior to the 0.59 release of Linux-PAM, the length of the returned
<tt/pam_response/ array was equal to the number of <em/prompts/ (types
<tt/PAM_PROMPT_ECHO_OFF/ and <tt/PAM_PROMPT_ECHO_ON/) in the
<tt/pam_message/ array with which the conversation function was
called.  This meant that it was not always necessary for the module to
<tt/free(3)/ the responses if the conversation function was only used
to display some text.

<p>
Post Linux-PAM-0.59 (and in the interests of compatibility with
Sunsoft).  The number of resposes is always equal to the <tt/num_msg/
conversation function argument.  This is slightly easier to program
but does require that the response array is <tt/free(3)/'d after every
call to the conversation function.  The index of the responses
corresponds directly to the prompt index in the <tt/pam_message/
array.

<p>
The maximum length of the <tt/pam_msg.msg/ and <tt/pam_response.resp/
character strings is <tt/PAM_MAX_MSG_SIZE/.  (This is not enforced by
Linux-PAM.)

<p>
<tt/PAM_SUCCESS/ is the expected return value of this
function.  However, should an error occur the application should not
set <tt/*resp/ but simply return <tt/PAM_CONV_ERR/.

<p>
Note, if an application wishes to use two conversation functions, it
should activate the second with a call to <tt/pam_set_item()/.

<p>
<bf>Notes:</bf> New item types are being added to the conversation
protocol.  Currently Linux-PAM supports: <tt>PAM_BINARY_PROMPT</tt>
and <tt>PAM_BINARY_MSG</tt>.  These two are intended for server-client
hidden information exchange and may be used as an interface for
maching-machine authentication.

<sect1>Programming notes

<p>
Note, all of the authentication service function calls accept the
token <tt/PAM_SILENT/, which instructs the modules to not send
messages to the application. This token can be logically OR'd with any
one of the permitted tokens specific to the individual function calls.
<tt/PAM_SILENT/ does not override the prompting of the user for
passwords etc., it only stops informative messages from being
generated.

<sect>Security issues of <bf>Linux-PAM</bf>

<p>
A poorly (or maliciously) written application can defeat any
<bf/Linux-PAM/ module's authentication mechanisms by simply ignoring
it's return values.  It is the applications task and responsibility to
grant privileges and access to services.  The <bf/Linux-PAM/ library
simply assumes the responsibility of <em/authenticating/ the user;
ascertaining that the user <em/is/ who they say they are.  Care should
be taken to anticipate all of the documented behavior of the
<bf/Linux-PAM/ library functions.  A failure to do this will most
certainly lead to a future security breach.

<sect1>Care about standard library calls

<p>
In general, writers of authorization-granting applications should
assume that each module is likely to call any or <em/all/ `libc'
functions.  For `libc' functions that return pointers to
static/dynamically allocated structures (ie. the library allocates the
memory and the user is not expected to `<tt/free()/' it) any module
call to this function is likely to corrupt a pointer previously
obtained by the application.  The application programmer should either
re-call such a `libc' function after a call to the <bf/Linux-PAM/
library, or copy the structure contents to some safe area of memory
before passing control to the <bf/Linux-PAM/ library.

<p>
Two function classes that fall into this category are
<tt>getpwnam(3)</tt> and <tt>syslog(3)</tt>.

<sect1>Choice of a service name

<p>
When picking the <em/service-name/ that corresponds to the first entry
in the <tt>/etc/pam.conf</tt> file, the application programmer should
<bf/avoid/ the temptation of choosing something related to
<tt/argv[0]/.  It is a trivial matter for any user to invoke any
application on a system under a different name -- this should not be
permitted to cause a security breach.

<p>
To invoke some <tt/target/ application by another name, the user may
symbolically link the target application with the desired name.  To be
precise all the user need do is,
<tscreen>
<verb>
ln -s /target/application ./preferred_name
</verb>
</tscreen>
and then <em/run/ <tt>./preferred_name</tt>

<p>
By studying the <bf/Linux-PAM/ configuration file,
<tt>/etc/pam.conf</tt>, an attacker can choose the <tt/preferred_name/
to be that of a service enjoying minimal protection; for example a
game which uses <bf/Linux-PAM/ to restrict access to certain hours of
the day.  If the service-name were to be linked to the filename under
which the service was invoked, it is clear that the user is
effectively in the position of dictating which authentication scheme
the service uses.  Needless to say, this is not a secure situation.

<p>
The conclusion is that the application developer should carefully
define the service-name of an application. The safest thing is to make
it a single hard-wired name.

<sect1>The conversation function

<p>
Care should be taken to ensure that the <tt/conv()/ function is
robust. Such a function is provided in the library <tt/libpam_misc/
(see <ref id="libpam-misc-section" name="below">).

<sect1>The identity of the user

<p>
The <bf/Linux-PAM/ modules will need to determine the identity of the
user who requests a service, and the identity of the user who grants
the service.  These two users will seldom be the same.  Indeed there
is generally a third user identity to be considered, the new (assumed)
identity of the user once the service is granted.

<p>
The need for keeping tabs on these identities is clearly an issue of
security.  Basically, the identity of the user requesting a service
should be the current <tt/uid/ (userid) of the running process; the
identity of the privilege granting user is the <tt/euid/ (effective
userid) of the running process; the identity of the user, under whose
name the service will be executed, is given by the contents of the
<tt/PAM_USER/ <tt/pam_get_item(2)/.

<p>
In addition the identity of a remote user, requesting the service from
a distant location, will be placed in the <tt/PAM_RUSER/ item.

<sect1>Sufficient resources

<p>
Care should be taken to ensure that the proper execution of an
application is not compromised by a lack of system resources.  If an
application is unable to open sufficient files to perform its service,
it should fail gracefully, or request additional resources.
Specifically, the quantities manipulated by the <tt/setrlimit(2)/
family of commands should be taken into consideration.

<sect>A library of miscellaneous helper functions
<label id="libpam-misc-section">

<p>
To aid the work of the application developer a library of
miscellaneous functions is provided.  It is called <tt/libpam_misc/,
and contains functions for allocating memory (securely), a text based
conversation function, and routines for enhancing the standard
PAM-environment variable support.

<sect1>Requirements

<p>
The functions, structures and macros, made available by this library
can be defined by including <tt>&lt;security/pam_misc.h&gt;</tt>.  It
should be noted that this library is specific to <bf/Linux-PAM/ and is
not referred to in the defining DCE-RFC (see <ref id="bibliography"
name="the bibliography">) below.

<sect1>Functions supplied

<sect2>Safe string duplication

<p>
<tscreen>
<verb>
extern char *xstrdup(const char *s)
</verb>
</tscreen>
Return a duplicate copy of the <tt/NUL/ terminated string,
<tt/s/. <tt/NULL/ is returned if there is insufficient memory
available for the duplicate or if <tt/s=NULL/.

<sect2>A text based conversation function

<p>
<tscreen>
<verb>
extern int misc_conv(int num_msg, const struct pam_message **msgm,
		     struct pam_response **response, void *appdata_ptr);
</verb>
</tscreen>

<p>
This is a function that will prompt the user with the appropriate
comments and obtain the appropriate inputs as directed by
authentication modules.

<p>
In addition to simply slotting into the appropriate <tt/struct
pam_conv/, this function provides some time-out facilities.  The
function exports five variables that can be used by an application
programmer to limit the amount of time this conversation function will
spend waiting for the user to type something.

<p>
The five variables are as follows:
<descrip>
<tag><tt>extern time_t pam_misc_conv_warn_time;</tt></tag>

This variable contains the <em/time/ (as returned by <tt/time()/) that
the user should be first warned that the clock is ticking. By default
it has the value <tt/0/, which indicates that no such warning will be
given. The application may set its value to sometime in the future,
but this should be done prior to passing control to the <bf/Linux-PAM/
library.

<tag><tt>extern const char *pam_misc_conv_warn_line;</tt></tag>

Used in conjuction with <tt/pam_misc_conv_warn_time/, this variable is
a pointer to the string that will be displayed when it becomes time to
warn the user that the timeout is approaching. Its default value is
``..&bsol;a.Time is running out...&bsol;n'', but this can be changed
by the application prior to passing control to <bf/Linux-PAM/.

<tag><tt>extern time_t pam_misc_conv_die_time;</tt></tag>

This variable contains the <em/time/ (as returned by <tt/time()/) that
the conversation will time out. By default it has the value <tt/0/,
which indicates that the conversation function will not timeout. The
application may set its value to sometime in the future, this should
be done prior to passing control to the <bf/Linux-PAM/ library.

<tag><tt>extern const char *pam_misc_conv_die_line;</tt></tag>

Used in conjuction with <tt/pam_misc_conv_die_time/, this variable is
a pointer to the string that will be displayed when the conversation
times out. Its default value is ``..&bsol;a.Sorry, your time is
up!&bsol;n'', but this can be changed by the application prior to
passing control to <bf/Linux-PAM/.

<tag><tt>extern int pam_misc_conv_died;</tt></tag>

Following a return from the <bf/Linux-PAM/ libraray, the value of this
variable indicates whether the conversation has timed out. A value of
<tt/1/ indicates the time-out occurred.

<tag><tt>extern int (*pam_binary_handler_fn)(const union pam_u_packet_p send,
                     union pam_u_packet_p *receive);</tt></tag>

This function pointer is initialized to <tt/NULL/ but can be filled
with a function that provides machine-machine (hidden) message
exchange.  It is intended for use with hidden authentication protocols
such as RSA or Diffie-Hellman key exchanges.  (This is still under
development.)

</descrip>

<sect2>Transcribing an environment to that of Linux-PAM
<p>
<tscreen>
<verb>
extern int pam_misc_paste_env(pam_handle_t *pamh,
			      const char * const * user_env);
</verb>
</tscreen>

This function takes the supplied list of environment pointers and
<em/uploads/ its contents to the <bf/Linux-PAM/ environment. Success
is indicated by <tt/PAM_SUCCESS/.

<sect2>Saving the Linux-PAM environment for later use
<p>
<tscreen>
<verb>
extern char **pam_misc_copy_env(pam_handle_t *pamh);
</verb>
</tscreen>

This function returns a pointer to a list of environment variables
that are a direct copy of the <bf/Linux-PAM/ environment.  The memory
associated with these variables are the responsibility of the
application and should be liberated with a call to
<tt/pam_misc_drop_env()/.

<sect2>Liberating a locally saved environment
<p>
<tscreen>
<verb>
extern char **pam_misc_drop_env(char **env);
</verb>
</tscreen>

This function is defined to complement the <tt/pam_misc_copy_env()/
function.  It liberates the memory associated with <tt/env/,
<em/overwriting/ with <tt/0/ all memory before <tt/free()/ing it.

<sect2>BSD like Linux-PAM environment variable setting
<p>
<tscreen>
<verb>
extern int pam_misc_setenv(pam_handle_t *pamh, const char *name,
			   const char *value, int readonly);
</verb>
</tscreen>

This function performs a task equivalent to <tt/pam_putenv()/, its
syntax is, however, more like the BSD style function; <tt/setenv()/.
The <tt/name/ and <tt/value/ are concatenated with an ``<tt/=/'' to
form a <tt/name_value/ and passed to <tt/pam_putenv()/. If, however,
the <bf/Linux-PAM/ variable is already set, the replacement will only
be applied if the last argument, <tt/readonly/, is zero.

<sect>Porting legacy applications

<p>
The following is extracted from an email.  I'll tidy it up later.

<p>
The point of PAM is that the application is not supposed to have any
idea how the attatched authentication modules will choose to
authenticate the user.  So all they can do is provide a conversation
function that will talk directly to the user(client) on the modules'
behalf.

<p>
Consider the case that you plug a retinal scanner into the login
program.  In this situation the user would be prompted: "please look
into the scanner".  No username or password would be needed - all this
information could be deduced from the scan and a database lookup.  The
point is that the retinal scanner is an ideal task for a "module".

<p>
While it is true that a pop-daemon program is designed with the POP
protocol in mind and no-one ever considered attatching a retinal
scanner to it, it is also the case that the "clean" PAM'ification of
such a daemon would allow for the possibility of a scanner module
being be attatched to it.  The point being that the "standard"
pop-authentication protocol(s) [which will be needed to satisfy
inflexible/legacy clients] would be supported by inserting an
appropriate pam_qpopper module(s).  However, having rewritten popd
once in this way any new protocols can be implemented in-situ.

<p>
One simple test of a ported application would be to insert the
<tt/pam_permit/ module and see if the application demands you type a
password...  In such a case, <tt/xlock/ would fail to lock the
terminal - or would at best be a screen-saver, ftp would give password
free access to all etc..  Neither of these is a very secure thing to
do, but they do illustrate how much flexibility PAM puts in the hands
of the local admin.

<p>
The key issue, in doing things correctly, is identifying what is part
of the authentication procedure (how many passwords etc..) the
exchange protocol (prefixes to prompts etc., numbers like 331 in the
case of ftpd) and what is part of the service that the application
delivers.  PAM really needs to have total control in the
authentication "proceedure", the conversation function should only
deal with reformatting user prompts and extracting responses from raw
input.

<sect>Glossary of PAM related terms

<p>
The following are a list of terms used within this document.

<p>
<descrip>

<tag>Authentication token</tag>
Generally, this is a password.  However, a user can authenticate
him/herself in a variety of ways.  Updating the user's authentication
token thus corresponds to <em>refreshing</em> the object they use to
authenticate themself with the system.  The word password is avoided
to keep open the possibility that the authentication involves a
retinal scan or other non-textual mode of challenge/response.

<tag>Credentials</tag>
Having successfully authenticated the user, PAM is able to establish
certain characteristics/attributes of the user.  These are termed
<em>credentials</em>.  Examples of which are group memberships to
perform privileged tasks with, and <em>tickets</em> in the form of
environment variables etc. .  Some user-credentials, such as the
user's UID and GID (plus default group memberships) are not deemed to
be PAM-credentials.  It is the responsibility of the application to
grant these directly.

</descrip>

<sect>An example application

<p>
To get a flavor of the way a <tt/Linux-PAM/ application is written we
include the following example. It prompts the user for their password
and indicates whether their account is valid on the standard output,
its return code also indicates the success (<tt/0/ for success; <tt/1/
for failure).

<p>
<tscreen>
<verb>
/*
  This program was contributed by Shane Watts
  [modifications by AGM]

  You need to add the following (or equivalent) to the /etc/pam.conf file.
  # check authorization
  check_user   auth       required     /usr/lib/security/pam_unix_auth.so
  check_user   account    required     /usr/lib/security/pam_unix_acct.so
 */

#include <security/pam_appl.h>
#include <security/pam_misc.h>
#include <stdio.h>

static struct pam_conv conv = {
    misc_conv,
    NULL
};

int main(int argc, char *argv[])
{
    pam_handle_t *pamh=NULL;
    int retval;
    const char *user="nobody";

    if(argc == 2) {
	user = argv[1];
    }

    if(argc > 2) {
	fprintf(stderr, "Usage: check_user [username]\n");
	exit(1);
    }

    retval = pam_start("check_user", user, &ero;conv, &ero;pamh);
	
    if (retval == PAM_SUCCESS)
        retval = pam_authenticate(pamh, 0);    /* is user really user? */

    if (retval == PAM_SUCCESS)
        retval = pam_acct_mgmt(pamh, 0);       /* permitted access? */

    /* This is where we have been authorized or not. */

    if (retval == PAM_SUCCESS) {
	fprintf(stdout, "Authenticated\n");
    } else {
	fprintf(stdout, "Not Authenticated\n");
    }

    if (pam_end(pamh,retval) != PAM_SUCCESS) {     /* close Linux-PAM */
	pamh = NULL;
	fprintf(stderr, "check_user: failed to release authenticator\n");
	exit(1);
    }

    return ( retval == PAM_SUCCESS ? 0:1 );       /* indicate success */
}
</verb>
</tscreen>

<sect>Files

<p><descrip>

<tag><tt>/usr/include/security/pam_appl.h</tt></tag>

header file for <bf/Linux-PAM/ applications interface

<tag><tt>/usr/include/security/pam_misc.h</tt></tag>

header file for useful library functions for making applications
easier to write

<tag><tt>/usr/lib/libpam.so.*</tt></tag>

the shared library providing applications with access to
<bf/Linux-PAM/.

<tag><tt>/etc/pam.conf</tt></tag>

the <bf/Linux-PAM/ configuration file.

<tag><tt>/usr/lib/security/pam_*.so</tt></tag>

the primary location for <bf/Linux-PAM/ dynamically loadable object
files; the modules.

</descrip>

<sect>See also
<label id="bibliography">

<p><itemize>

<item>The <bf/Linux-PAM/
<htmlurl url="pam.html" name="System Administrators' Guide">.

<item>The <bf/Linux-PAM/
<htmlurl url="pam_modules.html" name="Module Writers' Guide">.

<item>The V. Samar and R. Schemers (SunSoft), ``UNIFIED LOGIN WITH
PLUGGABLE AUTHENTICATION MODULES'', Open Software Foundation Request
For Comments 86.0, October 1995.

</itemize>

<sect>Notes

<p>
I intend to put development comments here... like ``at the moment
this isn't actually supported''. At release time what ever is in
this section will be placed in the Bugs section below! :)

<p>
<itemize>

<item> <tt/pam_strerror()/ should be internationalized....

<item>
Note, the <tt/resp_retcode/ of struct <tt/pam_message/, has no
purpose at the moment. Ideas/suggestions welcome!

<item> more security issues are required....

</itemize>

<sect>Author/acknowledgments

<p>
This document was written by Andrew G. Morgan
(morgan@transmeta.com) with many contributions from
<!-- insert credits here -->
<!--
 an sgml list of people to credit for their contributions to Linux-PAM
 $Id: CREDITS,v 1.4 1997/04/05 06:47:26 morgan Exp morgan $
  -->
Peter Allgeyer,
Tim Baverstock,
Craig S. Bell,
Derrick J. Brashear,
Ben Buxton,
Oliver Crow,
Chris Dent,
Marc Ewing,
Cristian Gafton,
Eric Hester,
Roger Hu,
Eric Jacksch,
Michael K. Johnson,
David Kinchlea,
Nicolai Langfeldt,
Elliot Lee,
Al Longyear,
Ingo Luetkebohle,
Marek Michalkiewicz,
Aleph One,
Martin Pool,
Sean Reifschneider,
Erik Troan,
Theodore Ts'o,
Jeff Uphoff,
Myles Uyema,
Savochkin Andrey Vladimirovich,
Ronald Wahl,
David Wood,
John Wilmes,
Joseph S. D. Yao
and
Alex O.  Yuriev.


<p>
Thanks are also due to Sun Microsystems, especially to Vipin Samar and
Charlie Lai for their advice. At an early stage in the development of
<bf/Linux-PAM/, Sun graciously made the documentation for their
implementation of PAM available. This act greatly accelerated the
development of <bf/Linux-PAM/.

<sect>Bugs/omissions

<p>
This manual is hopelessly unfinished. Only a partial list of people is
credited for all the good work they have done.

<sect>Copyright information for this document

<p>
Copyright (c) Andrew G. Morgan 1996, 1997.  All rights reserved.
<newline>
Email: <tt>&lt;morgan@transmeta.com&gt;</tt>

<p>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

<p>
<itemize>

<item>
1. Redistributions of source code must retain the above copyright
   notice, and the entire permission notice in its entirety,
   including the disclaimer of warranties.

<item>
2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.

<item>
3. The name of the author may not be used to endorse or promote
   products derived from this software without specific prior
   written permission.

</itemize>

<p>
<bf/Alternatively/, this product may be distributed under the terms of
the GNU General Public License (GPL), in which case the provisions of
the GNU GPL are required <bf/instead of/ the above restrictions.
(This clause is necessary due to a potential bad interaction between
the GNU GPL and the restrictions contained in a BSD-style copyright.)

<p>
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.

<p>
<tt>$Id: pam_appl.sgml,v 1.16 1997/04/05 06:49:14 morgan Exp morgan $</tt>

</article>