freebsd-skq/sys/netinet/ip_divert.c
Mark Johnston 652908599b Add required checks for unmapped mbufs in ipdivert and ipfw
Also add an M_ASSERTMAPPED() macro to verify that all mbufs in the chain
are mapped.  Use it in ipfw_nat, which operates on a chain returned by
m_megapullup().

PR:		255164
Reviewed by:	ae, gallatin
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D29838
2021-04-21 15:47:05 -04:00

851 lines
22 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_sctp.h"
#ifndef INET
#error "IPDIVERT requires INET"
#endif
#include <sys/param.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/kernel.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <net/vnet.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/netisr.h>
#include <netinet/in.h>
#include <netinet/in_pcb.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#ifdef INET6
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#endif
#if defined(SCTP) || defined(SCTP_SUPPORT)
#include <netinet/sctp_crc32.h>
#endif
#include <security/mac/mac_framework.h>
/*
* Divert sockets
*/
/*
* Allocate enough space to hold a full IP packet
*/
#define DIVSNDQ (65536 + 100)
#define DIVRCVQ (65536 + 100)
/*
* Divert sockets work in conjunction with ipfw or other packet filters,
* see the divert(4) manpage for features.
* Packets are selected by the packet filter and tagged with an
* MTAG_IPFW_RULE tag carrying the 'divert port' number (as set by
* the packet filter) and information on the matching filter rule for
* subsequent reinjection. The divert_port is used to put the packet
* on the corresponding divert socket, while the rule number is passed
* up (at least partially) as the sin_port in the struct sockaddr.
*
* Packets written to the divert socket carry in sin_addr a
* destination address, and in sin_port the number of the filter rule
* after which to continue processing.
* If the destination address is INADDR_ANY, the packet is treated as
* as outgoing and sent to ip_output(); otherwise it is treated as
* incoming and sent to ip_input().
* Further, sin_zero carries some information on the interface,
* which can be used in the reinject -- see comments in the code.
*
* On reinjection, processing in ip_input() and ip_output()
* will be exactly the same as for the original packet, except that
* packet filter processing will start at the rule number after the one
* written in the sin_port (ipfw does not allow a rule #0, so sin_port=0
* will apply the entire ruleset to the packet).
*/
/* Internal variables. */
VNET_DEFINE_STATIC(struct inpcbhead, divcb);
VNET_DEFINE_STATIC(struct inpcbinfo, divcbinfo);
#define V_divcb VNET(divcb)
#define V_divcbinfo VNET(divcbinfo)
static u_long div_sendspace = DIVSNDQ; /* XXX sysctl ? */
static u_long div_recvspace = DIVRCVQ; /* XXX sysctl ? */
static eventhandler_tag ip_divert_event_tag;
static int div_output_inbound(int fmaily, struct socket *so, struct mbuf *m,
struct sockaddr_in *sin);
static int div_output_outbound(int family, struct socket *so, struct mbuf *m);
/*
* Initialize divert connection block queue.
*/
static void
div_zone_change(void *tag)
{
uma_zone_set_max(V_divcbinfo.ipi_zone, maxsockets);
}
static int
div_inpcb_init(void *mem, int size, int flags)
{
struct inpcb *inp = mem;
INP_LOCK_INIT(inp, "inp", "divinp");
return (0);
}
static void
div_init(void)
{
/*
* XXX We don't use the hash list for divert IP, but it's easier to
* allocate one-entry hash lists than it is to check all over the
* place for hashbase == NULL.
*/
in_pcbinfo_init(&V_divcbinfo, "div", &V_divcb, 1, 1, "divcb",
div_inpcb_init, IPI_HASHFIELDS_NONE);
}
static void
div_destroy(void *unused __unused)
{
in_pcbinfo_destroy(&V_divcbinfo);
}
VNET_SYSUNINIT(divert, SI_SUB_PROTO_DOMAININIT, SI_ORDER_ANY,
div_destroy, NULL);
/*
* IPPROTO_DIVERT is not in the real IP protocol number space; this
* function should never be called. Just in case, drop any packets.
*/
static int
div_input(struct mbuf **mp, int *offp, int proto)
{
struct mbuf *m = *mp;
KMOD_IPSTAT_INC(ips_noproto);
m_freem(m);
return (IPPROTO_DONE);
}
/*
* Divert a packet by passing it up to the divert socket at port 'port'.
*
* Setup generic address and protocol structures for div_input routine,
* then pass them along with mbuf chain.
*/
static void
divert_packet(struct mbuf *m, bool incoming)
{
struct ip *ip;
struct inpcb *inp;
struct socket *sa;
u_int16_t nport;
struct sockaddr_in divsrc;
struct m_tag *mtag;
NET_EPOCH_ASSERT();
mtag = m_tag_locate(m, MTAG_IPFW_RULE, 0, NULL);
if (mtag == NULL) {
m_freem(m);
return;
}
/* Assure header */
if (m->m_len < sizeof(struct ip) &&
(m = m_pullup(m, sizeof(struct ip))) == NULL)
return;
ip = mtod(m, struct ip *);
/* Delayed checksums are currently not compatible with divert. */
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
m = mb_unmapped_to_ext(m);
if (m == NULL)
return;
in_delayed_cksum(m);
m->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
}
#if defined(SCTP) || defined(SCTP_SUPPORT)
if (m->m_pkthdr.csum_flags & CSUM_SCTP) {
m = mb_unmapped_to_ext(m);
if (m == NULL)
return;
sctp_delayed_cksum(m, (uint32_t)(ip->ip_hl << 2));
m->m_pkthdr.csum_flags &= ~CSUM_SCTP;
}
#endif
bzero(&divsrc, sizeof(divsrc));
divsrc.sin_len = sizeof(divsrc);
divsrc.sin_family = AF_INET;
/* record matching rule, in host format */
divsrc.sin_port = ((struct ipfw_rule_ref *)(mtag+1))->rulenum;
/*
* Record receive interface address, if any.
* But only for incoming packets.
*/
if (incoming) {
struct ifaddr *ifa;
struct ifnet *ifp;
/* Sanity check */
M_ASSERTPKTHDR(m);
/* Find IP address for receive interface */
ifp = m->m_pkthdr.rcvif;
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
divsrc.sin_addr =
((struct sockaddr_in *) ifa->ifa_addr)->sin_addr;
break;
}
}
/*
* Record the incoming interface name whenever we have one.
*/
if (m->m_pkthdr.rcvif) {
/*
* Hide the actual interface name in there in the
* sin_zero array. XXX This needs to be moved to a
* different sockaddr type for divert, e.g.
* sockaddr_div with multiple fields like
* sockaddr_dl. Presently we have only 7 bytes
* but that will do for now as most interfaces
* are 4 or less + 2 or less bytes for unit.
* There is probably a faster way of doing this,
* possibly taking it from the sockaddr_dl on the iface.
* This solves the problem of a P2P link and a LAN interface
* having the same address, which can result in the wrong
* interface being assigned to the packet when fed back
* into the divert socket. Theoretically if the daemon saves
* and re-uses the sockaddr_in as suggested in the man pages,
* this iface name will come along for the ride.
* (see div_output for the other half of this.)
*/
strlcpy(divsrc.sin_zero, m->m_pkthdr.rcvif->if_xname,
sizeof(divsrc.sin_zero));
}
/* Put packet on socket queue, if any */
sa = NULL;
nport = htons((u_int16_t)(((struct ipfw_rule_ref *)(mtag+1))->info));
CK_LIST_FOREACH(inp, &V_divcb, inp_list) {
/* XXX why does only one socket match? */
if (inp->inp_lport == nport) {
INP_RLOCK(inp);
if (__predict_false(inp->inp_flags2 & INP_FREED)) {
INP_RUNLOCK(inp);
continue;
}
sa = inp->inp_socket;
SOCKBUF_LOCK(&sa->so_rcv);
if (sbappendaddr_locked(&sa->so_rcv,
(struct sockaddr *)&divsrc, m,
(struct mbuf *)0) == 0) {
SOCKBUF_UNLOCK(&sa->so_rcv);
sa = NULL; /* force mbuf reclaim below */
} else
sorwakeup_locked(sa);
INP_RUNLOCK(inp);
break;
}
}
if (sa == NULL) {
m_freem(m);
KMOD_IPSTAT_INC(ips_noproto);
KMOD_IPSTAT_DEC(ips_delivered);
}
}
/*
* Deliver packet back into the IP processing machinery.
*
* If no address specified, or address is 0.0.0.0, send to ip_output();
* otherwise, send to ip_input() and mark as having been received on
* the interface with that address.
*/
static int
div_output(struct socket *so, struct mbuf *m, struct sockaddr_in *sin,
struct mbuf *control)
{
struct epoch_tracker et;
const struct ip *ip;
struct m_tag *mtag;
struct ipfw_rule_ref *dt;
int error, family;
/*
* An mbuf may hasn't come from userland, but we pretend
* that it has.
*/
m->m_pkthdr.rcvif = NULL;
m->m_nextpkt = NULL;
M_SETFIB(m, so->so_fibnum);
if (control)
m_freem(control); /* XXX */
mtag = m_tag_locate(m, MTAG_IPFW_RULE, 0, NULL);
if (mtag == NULL) {
/* this should be normal */
mtag = m_tag_alloc(MTAG_IPFW_RULE, 0,
sizeof(struct ipfw_rule_ref), M_NOWAIT | M_ZERO);
if (mtag == NULL) {
m_freem(m);
return (ENOBUFS);
}
m_tag_prepend(m, mtag);
}
dt = (struct ipfw_rule_ref *)(mtag+1);
/* Loopback avoidance and state recovery */
if (sin) {
int i;
/* set the starting point. We provide a non-zero slot,
* but a non_matching chain_id to skip that info and use
* the rulenum/rule_id.
*/
dt->slot = 1; /* dummy, chain_id is invalid */
dt->chain_id = 0;
dt->rulenum = sin->sin_port+1; /* host format ? */
dt->rule_id = 0;
/* XXX: broken for IPv6 */
/*
* Find receive interface with the given name, stuffed
* (if it exists) in the sin_zero[] field.
* The name is user supplied data so don't trust its size
* or that it is zero terminated.
*/
for (i = 0; i < sizeof(sin->sin_zero) && sin->sin_zero[i]; i++)
;
if ( i > 0 && i < sizeof(sin->sin_zero))
m->m_pkthdr.rcvif = ifunit(sin->sin_zero);
}
ip = mtod(m, struct ip *);
switch (ip->ip_v) {
case IPVERSION:
family = AF_INET;
break;
#ifdef INET6
case IPV6_VERSION >> 4:
family = AF_INET6;
break;
#endif
default:
m_freem(m);
return (EAFNOSUPPORT);
}
/* Reinject packet into the system as incoming or outgoing */
NET_EPOCH_ENTER(et);
if (!sin || sin->sin_addr.s_addr == 0) {
dt->info |= IPFW_IS_DIVERT | IPFW_INFO_OUT;
error = div_output_outbound(family, so, m);
} else {
dt->info |= IPFW_IS_DIVERT | IPFW_INFO_IN;
error = div_output_inbound(family, so, m, sin);
}
NET_EPOCH_EXIT(et);
if (error != 0)
m_freem(m);
return (error);
}
/*
* Sends mbuf @m to the wire via ip[6]_output().
*
* Returns 0 on success, @m is consumed.
* On failure, returns error code. It is caller responsibility to free @m.
*/
static int
div_output_outbound(int family, struct socket *so, struct mbuf *m)
{
struct ip *const ip = mtod(m, struct ip *);
struct mbuf *options;
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
INP_RLOCK(inp);
switch (family) {
case AF_INET:
/*
* Don't allow both user specified and setsockopt
* options, and don't allow packet length sizes that
* will crash.
*/
if ((((ip->ip_hl << 2) != sizeof(struct ip)) &&
inp->inp_options != NULL) ||
((u_short)ntohs(ip->ip_len) > m->m_pkthdr.len)) {
INP_RUNLOCK(inp);
return (EINVAL);
}
break;
#ifdef INET6
case AF_INET6:
{
struct ip6_hdr *const ip6 = mtod(m, struct ip6_hdr *);
/* Don't allow packet length sizes that will crash */
if (((u_short)ntohs(ip6->ip6_plen) > m->m_pkthdr.len)) {
INP_RUNLOCK(inp);
return (EINVAL);
}
break;
}
#endif
}
/* Send packet to output processing */
KMOD_IPSTAT_INC(ips_rawout); /* XXX */
#ifdef MAC
mac_inpcb_create_mbuf(inp, m);
#endif
/*
* Get ready to inject the packet into ip_output().
* Just in case socket options were specified on the
* divert socket, we duplicate them. This is done
* to avoid having to hold the PCB locks over the call
* to ip_output(), as doing this results in a number of
* lock ordering complexities.
*
* Note that we set the multicast options argument for
* ip_output() to NULL since it should be invariant that
* they are not present.
*/
KASSERT(inp->inp_moptions == NULL,
("multicast options set on a divert socket"));
/*
* XXXCSJP: It is unclear to me whether or not it makes
* sense for divert sockets to have options. However,
* for now we will duplicate them with the INP locks
* held so we can use them in ip_output() without
* requring a reference to the pcb.
*/
options = NULL;
if (inp->inp_options != NULL) {
options = m_dup(inp->inp_options, M_NOWAIT);
if (options == NULL) {
INP_RUNLOCK(inp);
return (ENOBUFS);
}
}
INP_RUNLOCK(inp);
error = 0;
switch (family) {
case AF_INET:
error = ip_output(m, options, NULL,
((so->so_options & SO_DONTROUTE) ? IP_ROUTETOIF : 0)
| IP_ALLOWBROADCAST | IP_RAWOUTPUT, NULL, NULL);
break;
#ifdef INET6
case AF_INET6:
error = ip6_output(m, NULL, NULL, 0, NULL, NULL, NULL);
break;
#endif
}
if (options != NULL)
m_freem(options);
return (error);
}
/*
* Schedules mbuf @m for local processing via IPv4/IPv6 netisr queue.
*
* Returns 0 on success, @m is consumed.
* Returns error code on failure. It is caller responsibility to free @m.
*/
static int
div_output_inbound(int family, struct socket *so, struct mbuf *m,
struct sockaddr_in *sin)
{
const struct ip *ip;
struct ifaddr *ifa;
if (m->m_pkthdr.rcvif == NULL) {
/*
* No luck with the name, check by IP address.
* Clear the port and the ifname to make sure
* there are no distractions for ifa_ifwithaddr.
*/
/* XXX: broken for IPv6 */
bzero(sin->sin_zero, sizeof(sin->sin_zero));
sin->sin_port = 0;
ifa = ifa_ifwithaddr((struct sockaddr *) sin);
if (ifa == NULL)
return (EADDRNOTAVAIL);
m->m_pkthdr.rcvif = ifa->ifa_ifp;
}
#ifdef MAC
mac_socket_create_mbuf(so, m);
#endif
/* Send packet to input processing via netisr */
switch (family) {
case AF_INET:
ip = mtod(m, struct ip *);
/*
* Restore M_BCAST flag when destination address is
* broadcast. It is expected by ip_tryforward().
*/
if (IN_MULTICAST(ntohl(ip->ip_dst.s_addr)))
m->m_flags |= M_MCAST;
else if (in_broadcast(ip->ip_dst, m->m_pkthdr.rcvif))
m->m_flags |= M_BCAST;
netisr_queue_src(NETISR_IP, (uintptr_t)so, m);
break;
#ifdef INET6
case AF_INET6:
netisr_queue_src(NETISR_IPV6, (uintptr_t)so, m);
break;
#endif
default:
return (EINVAL);
}
return (0);
}
static int
div_attach(struct socket *so, int proto, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp == NULL, ("div_attach: inp != NULL"));
if (td != NULL) {
error = priv_check(td, PRIV_NETINET_DIVERT);
if (error)
return (error);
}
error = soreserve(so, div_sendspace, div_recvspace);
if (error)
return error;
INP_INFO_WLOCK(&V_divcbinfo);
error = in_pcballoc(so, &V_divcbinfo);
if (error) {
INP_INFO_WUNLOCK(&V_divcbinfo);
return error;
}
inp = (struct inpcb *)so->so_pcb;
INP_INFO_WUNLOCK(&V_divcbinfo);
inp->inp_ip_p = proto;
inp->inp_vflag |= INP_IPV4;
inp->inp_flags |= INP_HDRINCL;
INP_WUNLOCK(inp);
return 0;
}
static void
div_detach(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_detach: inp == NULL"));
INP_INFO_WLOCK(&V_divcbinfo);
INP_WLOCK(inp);
in_pcbdetach(inp);
in_pcbfree(inp);
INP_INFO_WUNLOCK(&V_divcbinfo);
}
static int
div_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_bind: inp == NULL"));
/* in_pcbbind assumes that nam is a sockaddr_in
* and in_pcbbind requires a valid address. Since divert
* sockets don't we need to make sure the address is
* filled in properly.
* XXX -- divert should not be abusing in_pcbind
* and should probably have its own family.
*/
if (nam->sa_family != AF_INET)
return EAFNOSUPPORT;
((struct sockaddr_in *)nam)->sin_addr.s_addr = INADDR_ANY;
INP_INFO_WLOCK(&V_divcbinfo);
INP_WLOCK(inp);
INP_HASH_WLOCK(&V_divcbinfo);
error = in_pcbbind(inp, nam, td->td_ucred);
INP_HASH_WUNLOCK(&V_divcbinfo);
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_divcbinfo);
return error;
}
static int
div_shutdown(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_shutdown: inp == NULL"));
INP_WLOCK(inp);
socantsendmore(so);
INP_WUNLOCK(inp);
return 0;
}
static int
div_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *nam,
struct mbuf *control, struct thread *td)
{
/* Packet must have a header (but that's about it) */
if (m->m_len < sizeof (struct ip) &&
(m = m_pullup(m, sizeof (struct ip))) == NULL) {
KMOD_IPSTAT_INC(ips_toosmall);
m_freem(m);
return EINVAL;
}
/* Send packet */
return div_output(so, m, (struct sockaddr_in *)nam, control);
}
static void
div_ctlinput(int cmd, struct sockaddr *sa, void *vip)
{
struct in_addr faddr;
faddr = ((struct sockaddr_in *)sa)->sin_addr;
if (sa->sa_family != AF_INET || faddr.s_addr == INADDR_ANY)
return;
if (PRC_IS_REDIRECT(cmd))
return;
}
static int
div_pcblist(SYSCTL_HANDLER_ARGS)
{
struct xinpgen xig;
struct epoch_tracker et;
struct inpcb *inp;
int error;
if (req->newptr != 0)
return EPERM;
if (req->oldptr == 0) {
int n;
n = V_divcbinfo.ipi_count;
n += imax(n / 8, 10);
req->oldidx = 2 * (sizeof xig) + n * sizeof(struct xinpcb);
return 0;
}
if ((error = sysctl_wire_old_buffer(req, 0)) != 0)
return (error);
bzero(&xig, sizeof(xig));
xig.xig_len = sizeof xig;
xig.xig_count = V_divcbinfo.ipi_count;
xig.xig_gen = V_divcbinfo.ipi_gencnt;
xig.xig_sogen = so_gencnt;
error = SYSCTL_OUT(req, &xig, sizeof xig);
if (error)
return error;
NET_EPOCH_ENTER(et);
for (inp = CK_LIST_FIRST(V_divcbinfo.ipi_listhead);
inp != NULL;
inp = CK_LIST_NEXT(inp, inp_list)) {
INP_RLOCK(inp);
if (inp->inp_gencnt <= xig.xig_gen) {
struct xinpcb xi;
in_pcbtoxinpcb(inp, &xi);
INP_RUNLOCK(inp);
error = SYSCTL_OUT(req, &xi, sizeof xi);
} else
INP_RUNLOCK(inp);
}
NET_EPOCH_EXIT(et);
if (!error) {
/*
* Give the user an updated idea of our state.
* If the generation differs from what we told
* her before, she knows that something happened
* while we were processing this request, and it
* might be necessary to retry.
*/
xig.xig_gen = V_divcbinfo.ipi_gencnt;
xig.xig_sogen = so_gencnt;
xig.xig_count = V_divcbinfo.ipi_count;
error = SYSCTL_OUT(req, &xig, sizeof xig);
}
return (error);
}
#ifdef SYSCTL_NODE
static SYSCTL_NODE(_net_inet, IPPROTO_DIVERT, divert,
CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"IPDIVERT");
SYSCTL_PROC(_net_inet_divert, OID_AUTO, pcblist,
CTLTYPE_OPAQUE | CTLFLAG_RD | CTLFLAG_MPSAFE,
NULL, 0, div_pcblist, "S,xinpcb",
"List of active divert sockets");
#endif
struct pr_usrreqs div_usrreqs = {
.pru_attach = div_attach,
.pru_bind = div_bind,
.pru_control = in_control,
.pru_detach = div_detach,
.pru_peeraddr = in_getpeeraddr,
.pru_send = div_send,
.pru_shutdown = div_shutdown,
.pru_sockaddr = in_getsockaddr,
.pru_sosetlabel = in_pcbsosetlabel
};
struct protosw div_protosw = {
.pr_type = SOCK_RAW,
.pr_protocol = IPPROTO_DIVERT,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = div_input,
.pr_ctlinput = div_ctlinput,
.pr_ctloutput = ip_ctloutput,
.pr_init = div_init,
.pr_usrreqs = &div_usrreqs
};
static int
div_modevent(module_t mod, int type, void *unused)
{
int err = 0;
switch (type) {
case MOD_LOAD:
/*
* Protocol will be initialized by pf_proto_register().
* We don't have to register ip_protox because we are not
* a true IP protocol that goes over the wire.
*/
err = pf_proto_register(PF_INET, &div_protosw);
if (err != 0)
return (err);
ip_divert_ptr = divert_packet;
ip_divert_event_tag = EVENTHANDLER_REGISTER(maxsockets_change,
div_zone_change, NULL, EVENTHANDLER_PRI_ANY);
break;
case MOD_QUIESCE:
/*
* IPDIVERT may normally not be unloaded because of the
* potential race conditions. Tell kldunload we can't be
* unloaded unless the unload is forced.
*/
err = EPERM;
break;
case MOD_UNLOAD:
/*
* Forced unload.
*
* Module ipdivert can only be unloaded if no sockets are
* connected. Maybe this can be changed later to forcefully
* disconnect any open sockets.
*
* XXXRW: Note that there is a slight race here, as a new
* socket open request could be spinning on the lock and then
* we destroy the lock.
*/
INP_INFO_WLOCK(&V_divcbinfo);
if (V_divcbinfo.ipi_count != 0) {
err = EBUSY;
INP_INFO_WUNLOCK(&V_divcbinfo);
break;
}
ip_divert_ptr = NULL;
err = pf_proto_unregister(PF_INET, IPPROTO_DIVERT, SOCK_RAW);
INP_INFO_WUNLOCK(&V_divcbinfo);
#ifndef VIMAGE
div_destroy(NULL);
#endif
EVENTHANDLER_DEREGISTER(maxsockets_change, ip_divert_event_tag);
break;
default:
err = EOPNOTSUPP;
break;
}
return err;
}
static moduledata_t ipdivertmod = {
"ipdivert",
div_modevent,
0
};
DECLARE_MODULE(ipdivert, ipdivertmod, SI_SUB_PROTO_FIREWALL, SI_ORDER_ANY);
MODULE_DEPEND(ipdivert, ipfw, 3, 3, 3);
MODULE_VERSION(ipdivert, 1);