freebsd-skq/sys/dev/sbsh/if_sbshreg.h
Max Khon 7d0de413cb Driver for Granch SBNI16 SHDSL modem
Submitted by:	Denis I. Timofeev <timofeev@granch.ru>
MFC after:	1 week
2003-04-13 06:27:13 +00:00

195 lines
6.0 KiB
C

/**
* Granch SBNI16 G.SHDSL Modem driver definitions
* Written by Denis I. Timofeev, 2002-2003.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/* SBNI16 controller chip definitions */
/* CR bits */
#define TXEN 0x01 /* transmitter enable */
#define RXEN 0x02 /* receiver enable */
#define NCRC 0x04 /* ignore received CRC */
#define DLBK 0x08 /* digital loopback */
#define CMOD 0x10 /* 0 - use CRC-32, 1 - CRC-16 */
#define FMOD 0x20 /* interframe fill: 0 - all ones, 1 - 0xfe */
#define PMOD 0x40 /* data polarity: 0 - normal, 1 - invert */
#define XRST 0x80 /* reset the transceiver */
/* CRB bits */
#define RDBE 0x01 /* read burst enable */
#define WTBE 0x02 /* write burst enable */
#define RODD 0x04 /* receive 2-byte alignment */
#define RXDE 0x08 /* receive data enable */
/* SR and IMR bits */
#define TXS 0x01 /* transmit success */
#define RXS 0x02 /* receive success */
/* SR only */
#define CRC 0x04 /* CRC error */
#define OFL 0x08 /* fifo overflow error */
#define UFL 0x10 /* fifo underflow error */
#define EXT 0x20 /* interrupt from sk70725 */
/* IMR only */
#define TSI 0x80 /* generate test interrupt */
#define LAST_FRAG 0x00008000
#define SBNI16_MAX_FRAME (1536 + 16)
/* We don't have official vendor id yet... */
#define SBNI16_VENDOR 0x55
#define SBNI16_DEVICE 0x9d
#define SBNI16_SUBDEV 3
/* transceiver chip set definitions */
enum CX28975_API_commands {
_DSL_RESET_SYSTEM = 0x00,
_DSL_SYSTEM_ENABLE = 0x01,
_DSL_AFE_CONFIG = 0x02,
_DSL_TRAINING_MODE = 0x03,
_DSL_CLOCK_CONFIG = 0x04,
_DSL_PCM_MF_LEN = 0x05,
_DSL_SYSTEM_CONFIG = 0x06,
_DSL_LOOPBACK = 0x09,
_DSL_ACTIVATION = 0x0b,
_DSL_FORCE_DEACTIVATE = 0x0c,
_DSL_TEST_MODE = 0x0d,
_DSL_DATA_RATE = 0x0e,
_DSL_PREACTIVATION_CFG = 0x0f,
_DSL_FR_PCM_CONFIG = 0x10,
_DSL_FR_HDSL_CONFIG = 0x11,
_DSL_PCM_CLK_CONF = 0x12,
_AFE_TX_GAIN = 0x13,
_DSL_PREACT_USER_INFO = 0x14,
_DSL_PREACT_RATE_LIST = 0x15,
_DSL_TX_ISO_PULSE = 0x16,
_BP_ERLE_TEST_MODE = 0x18,
_DSL_MULTI_PAIR_CONFIG = 0x19,
_DSL_NB_MULTI_RATE_CONFIG = 0x1a,
_DSL_MULTI_RATE_CONFIG = 0x1b,
_ATM_PHY_MODE = 0x1c,
_ATM_PHY_UTOPIA_CONFIG = 0x1d,
_ATM_PHY_IF_MODE = 0x1e,
_ATM_PHY_INJECT_HEC_ERROR = 0x1f,
_ATM_PHY_CONFIG = 0x20,
_DSL_TNB_BER_STATE = 0x21,
_DSL_RNB_BER_STATE = 0x22,
_DSL_TP_BER_STATE = 0x23,
_DSL_RP_BER_STATE = 0x24,
_DSL_PRBS_CONFIGURE = 0x25,
_DSL_CONST_FILL = 0x26,
_DSL_DBANK = 0x27,
_DSL_NB_CONFIG = 0x28,
_DSL_TNB_FRM_OFST = 0x29,
_DSL_RNB_FRM_OFST = 0x2a,
_DSL_TP_FRM_OFST = 0x2e,
_DSL_RP_FRM_OFST = 0x2f,
_DSL_TP_MAPPER_VALUE = 0x30,
_DSL_TP_MAPPER_WRITE = 0x31,
_DSL_RP_MAPPER_VALUE = 0x32,
_DSL_RP_MAPPER_WRITE = 0x33,
_DSL_TH_MAPPER_VALUE = 0x34,
_DSL_TH_MAPPER_WRITE = 0x35,
_DSL_RH_MAPPER_VALUE = 0x36,
_DSL_RH_MAPPER_WRITE = 0x37,
_DSL_TNB_MAPPER_VALUE = 0x38,
_DSL_TNB_MAPPER_WRITE = 0x39,
_DSL_RNB_MAPPER_VALUE = 0x3a,
_DSL_RNB_MAPPER_WRITE = 0x3b,
_DSL_CLEAR_ERROR_CTRS = 0x40,
_DSL_INJECT_CRC_ERROR = 0x41,
_DSL_THRESHOLDS = 0x43,
_DSL_FR_SET_STATE_MACHINE = 0x4a,
_DSL_FR_TNB_RESET = 0x4b,
_DSL_FR_RNB_RESET = 0x4c,
_EOC_RESET = 0x4d,
_DSL_FR_TX_RESET = 0x4e,
_DSL_FR_RX_RESET = 0x4f,
_DSL_INTR_HOST_MASK = 0x50,
_DSL_INTR_API_SUBMASK = 0x51,
_DSL_DOWNLOAD_START = 0x53,
_DSL_DOWNLOAD_DATA = 0x54,
_DSL_DOWNLOAD_END = 0x55,
_DSL_DPLL_CLOCK_GEN = 0x58,
_DSL_NB_DPLL_CLOCK_GEN = 0x59,
_DSL_WRITE_REG = 0x75,
_DSL_WRITE_AFE = 0x76
};
enum CX28975_status_commands {
_DSL_READ_CONTROL = 0x80,
_DSL_FAR_END_ATTEN = 0x82,
_DSL_NOISE_MARGIN = 0x83,
_DSL_STATUS = 0x85,
_DSL_PREACT_GET_FE_CAPS = 0x88,
_DSL_PREACT_GET_OPT_DATA_RATE = 0x89,
_DSL_VERSIONS = 0x8a,
_DSL_TP_BER_RESULTS = 0x8c,
_DSL_RP_BER_RESULTS = 0x8d,
_DSL_STAGE_NUMBER = 0x8f,
_DSL_AFE_SETTING = 0x90,
_DSL_TNB_BER_RESULTS = 0x91,
_DSL_RNB_BER_RESULTS = 0x92,
_BP_ERLE_RESULTS = 0x93,
_DSL_POWER_BACK_OFF_RESULT = 0x94,
_DSL_OPER_ERR_CTRS = 0x9c,
_DSL_TIME = 0x9d,
_DSL_HDSL_PERF_ERR_CTRS = 0x9e,
_DSL_READ_REG = 0xa0,
_DSL_READ_AFE = 0xa1,
_DSL_SYSTEM_PERF_ERR_CTRS = 0xa2,
_DSL_TP_MAPPER_READ = 0xa3,
_DSL_RP_MAPPER_READ = 0xa4,
_DSL_TH_MAPPER_READ = 0xa5,
_DSL_RH_MAPPER_READ = 0xa6,
_DSL_TNB_MAPPER_READ = 0xa7,
_DSL_RNB_MAPPER_READ = 0xa8,
_EOC_RX_GET_STATS = 0xae,
_EOC_TX_SEND_COMMAND = 0xb0,
_EOC_RX_GET_MSG = 0xb1,
_EOC_TX_GET_MSG_STATUS = 0xb2,
_EOC_TX_DELETE_MSG = 0xb3,
_ATM_PHY_OPER_ERR_CTRS = 0xb8,
_ATM_PHY_PERF_ERR_CTRS = 0xb9,
_ATM_PHY_CELL_CTRS = 0xba
};
enum CX28975_acknoledge_status_codes {
_ACK_NOT_COMPLETE = 0x00,
_ACK_PASS = 0x01,
_ACK_BUSY = 0x02,
_ACK_NOT_APPLICABLE = 0x03,
_ACK_INVALID_DEST = 0x04,
_ACK_INVALID_OPCODE = 0x05,
_ACK_INVALID_LENGTH = 0x06,
_ACK_INVALID_DATA = 0x07,
_ACK_INVALID_CHKSUM = 0x08,
_ACK_NO_RESULT = 0x09,
_ACK_NOT_AVAILABLE = 0x0a,
_ACK_BOOT_WAKE_UP = 0x0d,
_ACK_OPER_WAKE_UP = 0x0e
};