88 lines
2.3 KiB
C
88 lines
2.3 KiB
C
/*
|
|
* Header file for ICOM radios
|
|
*/
|
|
#include "ntp_types.h"
|
|
|
|
/*
|
|
* Common definitions
|
|
*/
|
|
#define P_ERMSG 0x1 /* trace bus error messages */
|
|
#define P_TRACE 0x2 /* trace CI-V messges */
|
|
#define RETRY 3 /* max packet retries */
|
|
#define IBAUD B1200 /* autotune port speed */
|
|
|
|
/*
|
|
* Radio identifier codes
|
|
*/
|
|
#define IC1271 0x24
|
|
#define IC1275 0x18
|
|
#define IC271 0x20
|
|
#define IC275 0x10
|
|
#define IC375 0x12
|
|
#define IC471 0x22
|
|
#define IC475 0x14
|
|
#define IC575 0x16
|
|
#define IC725 0x28
|
|
#define IC726 0x30
|
|
#define IC735 0x04
|
|
#define IC751 0x1c
|
|
#define IC761 0x1e
|
|
#define IC765 0x2c
|
|
#define IC775 0x46
|
|
#define IC781 0x26
|
|
#define IC970 0x2e
|
|
#define R7000 0x08
|
|
#define R71 0x1a
|
|
#define R7100 0x34
|
|
#define R72 0x32
|
|
#define R8500 0x4a
|
|
#define R9000 0x2a
|
|
|
|
/*
|
|
* CI-V frame codes
|
|
*/
|
|
#define PR 0xfe /* preamble */
|
|
#define TX 0xe0 /* controller address */
|
|
#define FI 0xfd /* end of message */
|
|
#define ACK 0xfb /* controller normal reply */
|
|
#define NAK 0xfa /* controller error reply */
|
|
#define PAD 0xff /* transmit padding */
|
|
|
|
/*
|
|
* CI-V controller commands
|
|
*/
|
|
#define V_FREQT 0x00 /* freq set (transceive) */
|
|
#define V_MODET 0x01 /* set mode (transceive) */
|
|
#define V_RBAND 0x02 /* read band edge */
|
|
#define V_RFREQ 0x03 /* read frequency */
|
|
#define V_RMODE 0x04 /* read mode */
|
|
#define V_SFREQ 0x05 /* set frequency */
|
|
#define V_SMODE 0x06 /* set mode */
|
|
#define V_SVFO 0x07 /* select vfo */
|
|
#define V_SMEM 0x08 /* select channel/bank */
|
|
#define V_WRITE 0x09 /* write channel */
|
|
#define V_VFOM 0x0a /* memory -> vfo */
|
|
#define V_CLEAR 0x0b /* clear channel */
|
|
#define V_ROFFS 0x0c /* read tx offset */
|
|
#define V_SOFFS 0x0d /* write tx offset */
|
|
#define V_SCAN 0x0e /* scan control */
|
|
#define V_SPLIT 0x0f /* split control */
|
|
#define V_DIAL 0x10 /* set dial tuning step */
|
|
#define V_ATTEN 0x11 /* set attenuator */
|
|
#define V_SANT 0x12 /* select antenna */
|
|
#define V_ANNC 0x13 /* announce control */
|
|
#define V_WRCTL 0x14 /* write controls */
|
|
#define V_RDCTL 0x15 /* read controls */
|
|
#define V_TOGL 0x16 /* set switches */
|
|
#define V_ASCII 0x17 /* send CW message */
|
|
#define V_POWER 0x18 /* power control */
|
|
#define V_RDID 0x19 /* read model ID */
|
|
#define V_SETW 0x1a /* read/write channel/bank data */
|
|
#define V_CTRL 0x7f /* miscellaneous control */
|
|
|
|
/*
|
|
* Function prototypes
|
|
*/
|
|
int icom_init P((char *, int, int));
|
|
int icom_freq P((int, int, double));
|