155a72b58a
* extend the TX timestamp to 32 bits, as the AR5416 and later does a full 32 bit TX timestamp instead of 15 or 16 bits. * add RX descriptor fields for PHY uploaded information (coming soon) * add flags for RX/TX fast timestamp, hardware upload, etc * add a flag for TX to request ToD/ToA location information.
300 lines
12 KiB
C
300 lines
12 KiB
C
/*
|
|
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2002-2008 Atheros Communications, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _DEV_ATH_DESC_H
|
|
#define _DEV_ATH_DESC_H
|
|
|
|
#include "opt_ah.h" /* NB: required for AH_SUPPORT_AR5416 */
|
|
|
|
/*
|
|
* For now, define this for the structure definitions.
|
|
* Because of how the HAL / driver module currently builds,
|
|
* it's not very feasible to build the module without
|
|
* this defined. The rest of the code (eg in the driver
|
|
* body) can work fine with these fields being uninitialised;
|
|
* they'll be initialised to 0 anyway.
|
|
*/
|
|
|
|
#ifndef AH_SUPPORT_AR5416
|
|
#define AH_SUPPORT_AR5416 1
|
|
#endif
|
|
|
|
/*
|
|
* Transmit descriptor status. This structure is filled
|
|
* in only after the tx descriptor process method finds a
|
|
* ``done'' descriptor; at which point it returns something
|
|
* other than HAL_EINPROGRESS.
|
|
*
|
|
* Note that ts_antenna may not be valid for all h/w. It
|
|
* should be used only if non-zero.
|
|
*/
|
|
struct ath_tx_status {
|
|
uint16_t ts_seqnum; /* h/w assigned sequence number */
|
|
uint16_t ts_pad1[1];
|
|
uint32_t ts_tstamp; /* h/w assigned timestamp */
|
|
uint8_t ts_status; /* frame status, 0 => xmit ok */
|
|
uint8_t ts_rate; /* h/w transmit rate index */
|
|
int8_t ts_rssi; /* tx ack RSSI */
|
|
uint8_t ts_shortretry; /* # short retries */
|
|
uint8_t ts_longretry; /* # long retries */
|
|
uint8_t ts_virtcol; /* virtual collision count */
|
|
uint8_t ts_antenna; /* antenna information */
|
|
uint8_t ts_finaltsi; /* final transmit series index */
|
|
#ifdef AH_SUPPORT_AR5416
|
|
/* 802.11n status */
|
|
uint8_t ts_flags; /* misc flags */
|
|
uint8_t ts_queue_id; /* AR9300: TX queue id */
|
|
uint8_t ts_desc_id; /* AR9300: TX descriptor id */
|
|
uint8_t ts_tid; /* TID */
|
|
/* #define ts_rssi ts_rssi_combined */
|
|
uint32_t ts_ba_low; /* blockack bitmap low */
|
|
uint32_t ts_ba_high; /* blockack bitmap high */
|
|
uint32_t ts_evm0; /* evm bytes */
|
|
uint32_t ts_evm1;
|
|
uint32_t ts_evm2;
|
|
int8_t ts_rssi_ctl[3]; /* tx ack RSSI [ctl, chain 0-2] */
|
|
int8_t ts_rssi_ext[3]; /* tx ack RSSI [ext, chain 0-2] */
|
|
uint8_t ts_pad[2];
|
|
#endif /* AH_SUPPORT_AR5416 */
|
|
};
|
|
|
|
/* bits found in ts_status */
|
|
#define HAL_TXERR_XRETRY 0x01 /* excessive retries */
|
|
#define HAL_TXERR_FILT 0x02 /* blocked by tx filtering */
|
|
#define HAL_TXERR_FIFO 0x04 /* fifo underrun */
|
|
#define HAL_TXERR_XTXOP 0x08 /* txop exceeded */
|
|
#define HAL_TXERR_TIMER_EXPIRED 0x10 /* Tx timer expired */
|
|
|
|
/* bits found in ts_flags */
|
|
#define HAL_TX_BA 0x01 /* Block Ack seen */
|
|
#define HAL_TX_AGGR 0x02 /* Aggregate */
|
|
#define HAL_TX_DESC_CFG_ERR 0x10 /* Error in 20/40 desc config */
|
|
#define HAL_TX_DATA_UNDERRUN 0x20 /* Tx buffer underrun */
|
|
#define HAL_TX_DELIM_UNDERRUN 0x40 /* Tx delimiter underrun */
|
|
#define HAL_TX_FAST_TS 0x80 /* Tx locationing timestamp */
|
|
|
|
/*
|
|
* Receive descriptor status. This structure is filled
|
|
* in only after the rx descriptor process method finds a
|
|
* ``done'' descriptor; at which point it returns something
|
|
* other than HAL_EINPROGRESS.
|
|
*
|
|
* If rx_status is zero, then the frame was received ok;
|
|
* otherwise the error information is indicated and rs_phyerr
|
|
* contains a phy error code if HAL_RXERR_PHY is set. In general
|
|
* the frame contents is undefined when an error occurred thought
|
|
* for some errors (e.g. a decryption error), it may be meaningful.
|
|
*
|
|
* Note that the receive timestamp is expanded using the TSF to
|
|
* at least 15 bits (regardless of what the h/w provides directly).
|
|
* Newer hardware supports a full 32-bits; use HAL_CAP_32TSTAMP to
|
|
* find out if the hardware is capable.
|
|
*
|
|
* rx_rssi is in units of dbm above the noise floor. This value
|
|
* is measured during the preamble and PLCP; i.e. with the initial
|
|
* 4us of detection. The noise floor is typically a consistent
|
|
* -96dBm absolute power in a 20MHz channel.
|
|
*/
|
|
struct ath_rx_status {
|
|
uint16_t rs_datalen; /* rx frame length */
|
|
uint8_t rs_status; /* rx status, 0 => recv ok */
|
|
uint8_t rs_phyerr; /* phy error code */
|
|
int8_t rs_rssi; /* rx frame RSSI (combined for 11n) */
|
|
uint8_t rs_keyix; /* key cache index */
|
|
uint8_t rs_rate; /* h/w receive rate index */
|
|
uint8_t rs_more; /* more descriptors follow */
|
|
uint32_t rs_tstamp; /* h/w assigned timestamp */
|
|
uint32_t rs_antenna; /* antenna information */
|
|
#ifdef AH_SUPPORT_AR5416
|
|
/* 802.11n status */
|
|
int8_t rs_rssi_ctl[3]; /* rx frame RSSI [ctl, chain 0-2] */
|
|
int8_t rs_rssi_ext[3]; /* rx frame RSSI [ext, chain 0-2] */
|
|
uint8_t rs_isaggr; /* is part of the aggregate */
|
|
uint8_t rs_moreaggr; /* more frames in aggr to follow */
|
|
uint16_t rs_flags; /* misc flags */
|
|
uint8_t rs_num_delims; /* number of delims in aggr */
|
|
uint8_t rs_spare0; /* padding */
|
|
uint8_t rs_ness; /* number of extension spatial streams */
|
|
uint8_t rs_hw_upload_data_type; /* hw upload format */
|
|
uint16_t rs_spare1;
|
|
uint32_t rs_evm0; /* evm bytes */
|
|
uint32_t rs_evm1;
|
|
uint32_t rs_evm2;
|
|
uint32_t rs_evm3; /* needed for ar9300 and later */
|
|
uint32_t rs_evm4; /* needed for ar9300 and later */
|
|
#endif /* AH_SUPPORT_AR5416 */
|
|
};
|
|
|
|
/* bits found in rs_status */
|
|
#define HAL_RXERR_CRC 0x01 /* CRC error on frame */
|
|
#define HAL_RXERR_PHY 0x02 /* PHY error, rs_phyerr is valid */
|
|
#define HAL_RXERR_FIFO 0x04 /* fifo overrun */
|
|
#define HAL_RXERR_DECRYPT 0x08 /* non-Michael decrypt error */
|
|
#define HAL_RXERR_MIC 0x10 /* Michael MIC decrypt error */
|
|
#define HAL_RXERR_INCOMP 0x20 /* Rx Desc processing is incomplete */
|
|
#define HAL_RXERR_KEYMISS 0x40 /* Key not found in keycache */
|
|
|
|
/* bits found in rs_flags */
|
|
#define HAL_RX_MORE 0x0001 /* more descriptors follow */
|
|
#define HAL_RX_MORE_AGGR 0x0002 /* more frames in aggr */
|
|
#define HAL_RX_GI 0x0004 /* full gi */
|
|
#define HAL_RX_2040 0x0008 /* 40 Mhz */
|
|
#define HAL_RX_DELIM_CRC_PRE 0x0010 /* crc error in delimiter pre */
|
|
#define HAL_RX_DELIM_CRC_POST 0x0020 /* crc error in delim after */
|
|
#define HAL_RX_DECRYPT_BUSY 0x0040 /* decrypt was too slow */
|
|
#define HAL_RX_HI_RX_CHAIN 0x0080 /* SM power save: hi Rx chain control */
|
|
#define HAL_RX_IS_APSD 0x0100 /* Is ASPD trigger frame */
|
|
#define HAL_RX_STBC 0x0200 /* Is an STBC frame */
|
|
#define HAL_RX_LOC_INFO 0x0400 /* RX locationing information */
|
|
|
|
#define HAL_RX_HW_UPLOAD_DATA 0x1000 /* This is a hardware data frame */
|
|
#define HAL_RX_HW_SOUNDING 0x2000 /* Rx sounding frame (TxBF, positioning) */
|
|
#define HAL_RX_UPLOAD_VALID 0x4000 /* This hardware data frame is valid */
|
|
|
|
/*
|
|
* This is the format of RSSI[2] on the AR9285/AR9485.
|
|
* It encodes the LNA configuration information.
|
|
*
|
|
* For boards with an external diversity antenna switch,
|
|
* HAL_RX_LNA_EXTCFG encodes which configuration was
|
|
* used (antenna 1 or antenna 2.) This feeds into the
|
|
* switch table and ensures that the given antenna was
|
|
* connected to an LNA.
|
|
*/
|
|
#define HAL_RX_LNA_LNACFG 0x80 /* 1 = main LNA config used, 0 = ALT */
|
|
#define HAL_RX_LNA_EXTCFG 0x40 /* 0 = external diversity ant1, 1 = ant2 */
|
|
#define HAL_RX_LNA_CFG_USED 0x30 /* 2 bits; LNA config used on RX */
|
|
#define HAL_RX_LNA_CFG_USED_S 4
|
|
#define HAL_RX_LNA_CFG_MAIN 0x0c /* 2 bits; "Main" LNA config */
|
|
#define HAL_RX_LNA_CFG_ALT 0x02 /* 2 bits; "Alt" LNA config */
|
|
|
|
/*
|
|
* This is the format of RSSI_EXT[2] on the AR9285/AR9485.
|
|
* It encodes the switch table configuration and fast diversity
|
|
* value.
|
|
*/
|
|
#define HAL_RX_LNA_FASTDIV 0x40 /* 1 = fast diversity measurement done */
|
|
#define HAL_RX_LNA_SWITCH_0 0x30 /* 2 bits; sw_0[1:0] */
|
|
#define HAL_RX_LNA_SWITCH_COM 0x0f /* 4 bits, sw_com[3:0] */
|
|
|
|
enum {
|
|
HAL_PHYERR_UNDERRUN = 0, /* Transmit underrun */
|
|
HAL_PHYERR_TIMING = 1, /* Timing error */
|
|
HAL_PHYERR_PARITY = 2, /* Illegal parity */
|
|
HAL_PHYERR_RATE = 3, /* Illegal rate */
|
|
HAL_PHYERR_LENGTH = 4, /* Illegal length */
|
|
HAL_PHYERR_RADAR = 5, /* Radar detect */
|
|
HAL_PHYERR_SERVICE = 6, /* Illegal service */
|
|
HAL_PHYERR_TOR = 7, /* Transmit override receive */
|
|
/* NB: these are specific to the 5212 and later */
|
|
HAL_PHYERR_OFDM_TIMING = 17, /* */
|
|
HAL_PHYERR_OFDM_SIGNAL_PARITY = 18, /* */
|
|
HAL_PHYERR_OFDM_RATE_ILLEGAL = 19, /* */
|
|
HAL_PHYERR_OFDM_LENGTH_ILLEGAL = 20, /* */
|
|
HAL_PHYERR_OFDM_POWER_DROP = 21, /* */
|
|
HAL_PHYERR_OFDM_SERVICE = 22, /* */
|
|
HAL_PHYERR_OFDM_RESTART = 23, /* */
|
|
HAL_PHYERR_FALSE_RADAR_EXT = 24, /* */
|
|
HAL_PHYERR_CCK_TIMING = 25, /* */
|
|
HAL_PHYERR_CCK_HEADER_CRC = 26, /* */
|
|
HAL_PHYERR_CCK_RATE_ILLEGAL = 27, /* */
|
|
HAL_PHYERR_CCK_SERVICE = 30, /* */
|
|
HAL_PHYERR_CCK_RESTART = 31, /* */
|
|
HAL_PHYERR_CCK_LENGTH_ILLEGAL = 32, /* */
|
|
HAL_PHYERR_CCK_POWER_DROP = 33, /* */
|
|
/* AR5416 and later */
|
|
HAL_PHYERR_HT_CRC_ERROR = 34, /* */
|
|
HAL_PHYERR_HT_LENGTH_ILLEGAL = 35, /* */
|
|
HAL_PHYERR_HT_RATE_ILLEGAL = 36, /* */
|
|
|
|
HAL_PHYERR_SPECTRAL = 38,
|
|
};
|
|
|
|
/* value found in rs_keyix to mark invalid entries */
|
|
#define HAL_RXKEYIX_INVALID ((uint8_t) -1)
|
|
/* value used to specify no encryption key for xmit */
|
|
#define HAL_TXKEYIX_INVALID ((u_int) -1)
|
|
|
|
/* XXX rs_antenna definitions */
|
|
|
|
/*
|
|
* Definitions for the software frame/packet descriptors used by
|
|
* the Atheros HAL. This definition obscures hardware-specific
|
|
* details from the driver. Drivers are expected to fillin the
|
|
* portions of a descriptor that are not opaque then use HAL calls
|
|
* to complete the work. Status for completed frames is returned
|
|
* in a device-independent format.
|
|
*/
|
|
#ifdef AH_SUPPORT_AR5416
|
|
#define HAL_DESC_HW_SIZE 20
|
|
#else
|
|
#define HAL_DESC_HW_SIZE 4
|
|
#endif /* AH_SUPPORT_AR5416 */
|
|
|
|
struct ath_desc {
|
|
/*
|
|
* The following definitions are passed directly
|
|
* the hardware and managed by the HAL. Drivers
|
|
* should not touch those elements marked opaque.
|
|
*/
|
|
uint32_t ds_link; /* phys address of next descriptor */
|
|
uint32_t ds_data; /* phys address of data buffer */
|
|
uint32_t ds_ctl0; /* opaque DMA control 0 */
|
|
uint32_t ds_ctl1; /* opaque DMA control 1 */
|
|
uint32_t ds_hw[HAL_DESC_HW_SIZE]; /* opaque h/w region */
|
|
};
|
|
|
|
struct ath_desc_txedma {
|
|
uint32_t ds_info;
|
|
uint32_t ds_link;
|
|
uint32_t ds_hw[21]; /* includes buf/len */
|
|
};
|
|
|
|
struct ath_desc_status {
|
|
union {
|
|
struct ath_tx_status tx;/* xmit status */
|
|
struct ath_rx_status rx;/* recv status */
|
|
} ds_us;
|
|
};
|
|
|
|
#define ds_txstat ds_us.tx
|
|
#define ds_rxstat ds_us.rx
|
|
|
|
/* flags passed to tx descriptor setup methods */
|
|
/* This is a uint16_t field in ath_buf, just be warned! */
|
|
#define HAL_TXDESC_CLRDMASK 0x0001 /* clear destination filter mask */
|
|
#define HAL_TXDESC_NOACK 0x0002 /* don't wait for ACK */
|
|
#define HAL_TXDESC_RTSENA 0x0004 /* enable RTS */
|
|
#define HAL_TXDESC_CTSENA 0x0008 /* enable CTS */
|
|
#define HAL_TXDESC_INTREQ 0x0010 /* enable per-descriptor interrupt */
|
|
#define HAL_TXDESC_VEOL 0x0020 /* mark virtual EOL */
|
|
/* NB: this only affects frame, not any RTS/CTS */
|
|
#define HAL_TXDESC_DURENA 0x0040 /* enable h/w write of duration field */
|
|
#define HAL_TXDESC_EXT_ONLY 0x0080 /* send on ext channel only (11n) */
|
|
#define HAL_TXDESC_EXT_AND_CTL 0x0100 /* send on ext + ctl channels (11n) */
|
|
#define HAL_TXDESC_VMF 0x0200 /* virtual more frag */
|
|
#define HAL_TXDESC_LOWRXCHAIN 0x0400 /* switch to low RX chain */
|
|
#define HAL_TXDESC_LDPC 0x1000 /* Set LDPC TX for all rates */
|
|
#define HAL_TXDESC_HWTS 0x2000 /* Request Azimuth Timestamp in TX payload */
|
|
#define HAL_TXDESC_POS 0x4000 /* Request ToD/ToA locationing */
|
|
|
|
/* flags passed to rx descriptor setup methods */
|
|
#define HAL_RXDESC_INTREQ 0x0020 /* enable per-descriptor interrupt */
|
|
#endif /* _DEV_ATH_DESC_H */
|