f73c0ca9c8
It failed to recognize the PCI bus in a system that had only an old chip-set (class code 000000) and a Cyclom multiport serial card on PCI bus 0, but no VGA card or disk or network controller. PR: i386/5300 Submitted by: Nickolay N. Dudorov <nnd@itfs.nsk.su>
266 lines
5.9 KiB
C
266 lines
5.9 KiB
C
/*
|
|
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id: pcibus.c,v 1.40 1997/07/20 14:10:08 bde Exp $
|
|
*
|
|
*/
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <pci/pcivar.h>
|
|
#include <i386/isa/pcibus.h>
|
|
|
|
#ifdef PCI_COMPAT
|
|
/* XXX this is a terrible hack, which keeps the Tekram AMD SCSI driver happy */
|
|
#define cfgmech pci_mechanism
|
|
int cfgmech;
|
|
#else
|
|
static int cfgmech;
|
|
#endif /* PCI_COMPAT */
|
|
static int devmax;
|
|
|
|
/* enable configuration space accesses and return data port address */
|
|
|
|
static int
|
|
pci_cfgenable(unsigned bus, unsigned slot, unsigned func, int reg, int bytes)
|
|
{
|
|
int dataport = 0;
|
|
|
|
if (bus <= PCI_BUSMAX
|
|
&& slot < devmax
|
|
&& func <= PCI_FUNCMAX
|
|
&& reg <= PCI_REGMAX
|
|
&& bytes != 3
|
|
&& (unsigned) bytes <= 4
|
|
&& (reg & (bytes -1)) == 0) {
|
|
switch (cfgmech) {
|
|
case 1:
|
|
outl(CONF1_ADDR_PORT, (1 << 31)
|
|
| (bus << 16) | (slot << 11)
|
|
| (func << 8) | (reg & ~0x03));
|
|
dataport = CONF1_DATA_PORT + (reg & 0x03);
|
|
break;
|
|
case 2:
|
|
outb(CONF2_ENABLE_PORT, 0xf0 | (func << 1));
|
|
outb(CONF2_FORWARD_PORT, bus);
|
|
dataport = 0xc000 | (slot << 8) | reg;
|
|
break;
|
|
}
|
|
}
|
|
return (dataport);
|
|
}
|
|
|
|
/* disable configuration space accesses */
|
|
|
|
static void
|
|
pci_cfgdisable(void)
|
|
{
|
|
switch (cfgmech) {
|
|
case 1:
|
|
outl(CONF1_ADDR_PORT, 0);
|
|
break;
|
|
case 2:
|
|
outb(CONF2_ENABLE_PORT, 0);
|
|
outb(CONF2_FORWARD_PORT, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* read configuration space register */
|
|
|
|
int
|
|
pci_cfgread(pcicfgregs *cfg, int reg, int bytes)
|
|
{
|
|
int data = -1;
|
|
int port;
|
|
|
|
port = pci_cfgenable(cfg->bus, cfg->slot, cfg->func, reg, bytes);
|
|
|
|
if (port != 0) {
|
|
switch (bytes) {
|
|
case 1:
|
|
data = inb(port);
|
|
break;
|
|
case 2:
|
|
data = inw(port);
|
|
break;
|
|
case 4:
|
|
data = inl(port);
|
|
break;
|
|
}
|
|
pci_cfgdisable();
|
|
}
|
|
return (data);
|
|
}
|
|
|
|
/* write configuration space register */
|
|
|
|
void
|
|
pci_cfgwrite(pcicfgregs *cfg, int reg, int data, int bytes)
|
|
{
|
|
int port;
|
|
|
|
port = pci_cfgenable(cfg->bus, cfg->slot, cfg->func, reg, bytes);
|
|
if (port != 0) {
|
|
switch (bytes) {
|
|
case 1:
|
|
outb(port, data);
|
|
break;
|
|
case 2:
|
|
outw(port, data);
|
|
break;
|
|
case 4:
|
|
outl(port, data);
|
|
break;
|
|
}
|
|
pci_cfgdisable();
|
|
}
|
|
}
|
|
|
|
/* check whether the configuration mechanism has been correct identified */
|
|
|
|
static int
|
|
pci_cfgcheck(int maxdev)
|
|
{
|
|
u_char device;
|
|
|
|
if (bootverbose)
|
|
printf("pci_cfgcheck:\tdevice ");
|
|
|
|
for (device = 0; device < maxdev; device++) {
|
|
unsigned id, class, header;
|
|
if (bootverbose)
|
|
printf("%d ", device);
|
|
|
|
id = inl(pci_cfgenable(0, device, 0, 0, 4));
|
|
if (id == 0 || id == -1)
|
|
continue;
|
|
|
|
class = inl(pci_cfgenable(0, device, 0, 8, 4)) >> 8;
|
|
if (bootverbose)
|
|
printf("[class=%06x] ", class);
|
|
if (class == 0 || (class & 0xf870ff) != 0)
|
|
continue;
|
|
|
|
header = inb(pci_cfgenable(0, device, 0, 14, 1));
|
|
if (bootverbose)
|
|
printf("[hdr=%02x] ", header);
|
|
if ((header & 0x7e) != 0)
|
|
continue;
|
|
|
|
if (bootverbose)
|
|
printf("is there (id=%08x)\n", id);
|
|
|
|
pci_cfgdisable();
|
|
return (1);
|
|
}
|
|
if (bootverbose)
|
|
printf("-- nothing found\n");
|
|
|
|
pci_cfgdisable();
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
pci_cfgopen(void)
|
|
{
|
|
unsigned long mode1res,oldval1;
|
|
unsigned char mode2res,oldval2;
|
|
|
|
oldval1 = inl(CONF1_ADDR_PORT);
|
|
|
|
if (bootverbose) {
|
|
printf("pci_open(1):\tmode 1 addr port (0x0cf8) is 0x%08lx\n",
|
|
oldval1);
|
|
}
|
|
|
|
if ((oldval1 & CONF1_ENABLE_MSK) == 0) {
|
|
|
|
cfgmech = 1;
|
|
devmax = 32;
|
|
|
|
outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK);
|
|
outb(CONF1_ADDR_PORT +3, 0);
|
|
mode1res = inl(CONF1_ADDR_PORT);
|
|
outl(CONF1_ADDR_PORT, oldval1);
|
|
|
|
if (bootverbose)
|
|
printf("pci_open(1a):\tmode1res=0x%08lx (0x%08lx)\n",
|
|
mode1res, CONF1_ENABLE_CHK);
|
|
|
|
if (mode1res) {
|
|
if (pci_cfgcheck(32))
|
|
return (cfgmech);
|
|
}
|
|
|
|
outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK1);
|
|
mode1res = inl(CONF1_ADDR_PORT);
|
|
outl(CONF1_ADDR_PORT, oldval1);
|
|
|
|
if (bootverbose)
|
|
printf("pci_open(1b):\tmode1res=0x%08lx (0x%08lx)\n",
|
|
mode1res, CONF1_ENABLE_CHK1);
|
|
|
|
if ((mode1res & CONF1_ENABLE_MSK1) == CONF1_ENABLE_RES1) {
|
|
if (pci_cfgcheck(32))
|
|
return (cfgmech);
|
|
}
|
|
}
|
|
|
|
oldval2 = inb(CONF2_ENABLE_PORT);
|
|
|
|
if (bootverbose) {
|
|
printf("pci_open(2):\tmode 2 enable port (0x0cf8) is 0x%02x\n",
|
|
oldval2);
|
|
}
|
|
|
|
if ((oldval2 & 0xf0) == 0) {
|
|
|
|
cfgmech = 2;
|
|
devmax = 16;
|
|
|
|
outb(CONF2_ENABLE_PORT, CONF2_ENABLE_CHK);
|
|
mode2res = inb(CONF2_ENABLE_PORT);
|
|
outb(CONF2_ENABLE_PORT, oldval2);
|
|
|
|
if (bootverbose)
|
|
printf("pci_open(2a):\tmode2res=0x%02x (0x%02x)\n",
|
|
mode2res, CONF2_ENABLE_CHK);
|
|
|
|
if (mode2res == CONF2_ENABLE_RES) {
|
|
if (bootverbose)
|
|
printf("pci_open(2a):\tnow trying mechanism 2\n");
|
|
|
|
if (pci_cfgcheck(16))
|
|
return (cfgmech);
|
|
}
|
|
}
|
|
|
|
cfgmech = 0;
|
|
devmax = 0;
|
|
return (cfgmech);
|
|
}
|