cc816837b4
This is due to a bug that has been in there since Warneer did the PCCARD stuff, the altioaddr is not offset 8 its offset 14 from the base address. Also only probe the master device, no known PCCARD ATA thingies has a slave AFAIK..
364 lines
14 KiB
C
364 lines
14 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* ATA register defines */
|
|
#define ATA_DATA 0x00 /* data register */
|
|
#define ATA_ERROR 0x01 /* (R) error register */
|
|
#define ATA_E_NM 0x02 /* no media */
|
|
#define ATA_E_ABORT 0x04 /* command aborted */
|
|
#define ATA_E_MCR 0x08 /* media change request */
|
|
#define ATA_E_IDNF 0x10 /* ID not found */
|
|
#define ATA_E_MC 0x20 /* media changed */
|
|
#define ATA_E_UNC 0x40 /* uncorrectable data */
|
|
#define ATA_E_ICRC 0x80 /* UDMA crc error */
|
|
|
|
#define ATA_FEATURE 0x01 /* (W) feature register */
|
|
#define ATA_F_DMA 0x01 /* enable DMA */
|
|
#define ATA_F_OVL 0x02 /* enable overlap */
|
|
|
|
#define ATA_COUNT 0x02 /* (W) sector count */
|
|
#define ATA_IREASON 0x02 /* (R) interrupt reason */
|
|
#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */
|
|
#define ATA_I_IN 0x02 /* read (1) | write (0) */
|
|
#define ATA_I_RELEASE 0x04 /* released bus (1) */
|
|
#define ATA_I_TAGMASK 0xf8 /* tag mask */
|
|
|
|
#define ATA_SECTOR 0x03 /* sector # */
|
|
#define ATA_CYL_LSB 0x04 /* cylinder# LSB */
|
|
#define ATA_CYL_MSB 0x05 /* cylinder# MSB */
|
|
#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */
|
|
#define ATA_D_LBA 0x40 /* use LBA adressing */
|
|
#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */
|
|
|
|
#define ATA_CMD 0x07 /* command register */
|
|
#define ATA_C_NOP 0x00 /* NOP command */
|
|
#define ATA_C_F_FLUSHQUEUE 0x00 /* flush queued cmd's */
|
|
#define ATA_C_F_AUTOPOLL 0x01 /* start autopoll function */
|
|
#define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */
|
|
#define ATA_C_READ 0x20 /* read command */
|
|
#define ATA_C_WRITE 0x30 /* write command */
|
|
#define ATA_C_PACKET_CMD 0xa0 /* packet command */
|
|
#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/
|
|
#define ATA_C_SERVICE 0xa2 /* service command */
|
|
#define ATA_C_READ_MUL 0xc4 /* read multi command */
|
|
#define ATA_C_WRITE_MUL 0xc5 /* write multi command */
|
|
#define ATA_C_SET_MULTI 0xc6 /* set multi size command */
|
|
#define ATA_C_READ_DMA_QUEUED 0xc7 /* read w/DMA QUEUED command */
|
|
#define ATA_C_READ_DMA 0xc8 /* read w/DMA command */
|
|
#define ATA_C_WRITE_DMA 0xca /* write w/DMA command */
|
|
#define ATA_C_WRITE_DMA_QUEUED 0xcc /* write w/DMA QUEUED command */
|
|
#define ATA_C_FLUSHCACHE 0xe7 /* flush cache to disk */
|
|
#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */
|
|
#define ATA_C_SETFEATURES 0xef /* features command */
|
|
#define ATA_C_F_SETXFER 0x03 /* set transfer mode */
|
|
#define ATA_C_F_ENAB_WCACHE 0x02 /* enable write cache */
|
|
#define ATA_C_F_DIS_WCACHE 0x82 /* disable write cache */
|
|
#define ATA_C_F_ENAB_RCACHE 0xaa /* enable readahead cache */
|
|
#define ATA_C_F_DIS_RCACHE 0x55 /* disable readahead cache */
|
|
#define ATA_C_F_ENAB_RELIRQ 0x5d /* enable release interrupt */
|
|
#define ATA_C_F_DIS_RELIRQ 0xdd /* disable release interrupt */
|
|
#define ATA_C_F_ENAB_SRVIRQ 0x5e /* enable service interrupt */
|
|
#define ATA_C_F_DIS_SRVIRQ 0xde /* disable service interrupt */
|
|
|
|
#define ATA_STATUS 0x07 /* status register */
|
|
#define ATA_S_ERROR 0x01 /* error */
|
|
#define ATA_S_INDEX 0x02 /* index */
|
|
#define ATA_S_CORR 0x04 /* data corrected */
|
|
#define ATA_S_DRQ 0x08 /* data request */
|
|
#define ATA_S_DSC 0x10 /* drive seek completed */
|
|
#define ATA_S_SERVICE 0x10 /* drive needs service */
|
|
#define ATA_S_DWF 0x20 /* drive write fault */
|
|
#define ATA_S_DMA 0x20 /* DMA ready */
|
|
#define ATA_S_READY 0x40 /* drive ready */
|
|
#define ATA_S_BUSY 0x80 /* busy */
|
|
|
|
#define ATA_ALTOFFSET 0x206 /* alternate registers offset */
|
|
#define ATA_PCCARD_ALTOFFSET 0x0e /* do for PCCARD devices */
|
|
#define ATA_ALTIOSIZE 0x01 /* alternate registers size */
|
|
#define ATA_A_IDS 0x02 /* disable interrupts */
|
|
#define ATA_A_RESET 0x04 /* RESET controller */
|
|
#define ATA_A_4BIT 0x08 /* 4 head bits */
|
|
|
|
/* misc defines */
|
|
#define ATA_MASTER 0x00
|
|
#define ATA_SLAVE 0x10
|
|
#define ATA_IOSIZE 0x08
|
|
#define ATA_OP_FINISHED 0x00
|
|
#define ATA_OP_CONTINUES 0x01
|
|
#define ATA_DEV(device) ((device == ATA_MASTER) ? 0 : 1)
|
|
#define ATA_PARAM(scp, device) (scp->dev_param[ATA_DEV(device)])
|
|
|
|
/* busmaster DMA related defines */
|
|
#define ATA_BM_OFFSET1 0x08
|
|
#define ATA_DMA_ENTRIES 256
|
|
#define ATA_DMA_EOT 0x80000000
|
|
|
|
#define ATA_BMCMD_PORT 0x00
|
|
#define ATA_BMCMD_START_STOP 0x01
|
|
#define ATA_BMCMD_WRITE_READ 0x08
|
|
|
|
#define ATA_BMSTAT_PORT 0x02
|
|
#define ATA_BMSTAT_ACTIVE 0x01
|
|
#define ATA_BMSTAT_ERROR 0x02
|
|
#define ATA_BMSTAT_INTERRUPT 0x04
|
|
#define ATA_BMSTAT_MASK 0x07
|
|
#define ATA_BMSTAT_DMA_MASTER 0x20
|
|
#define ATA_BMSTAT_DMA_SLAVE 0x40
|
|
#define ATA_BMSTAT_DMA_SIMPLEX 0x80
|
|
|
|
#define ATA_BMDTP_PORT 0x04
|
|
|
|
#define ATA_BMIOSIZE 0x20
|
|
|
|
/* structure for holding DMA address data */
|
|
struct ata_dmaentry {
|
|
u_int32_t base;
|
|
u_int32_t count;
|
|
};
|
|
|
|
/* ATA/ATAPI device parameter information */
|
|
struct ata_params {
|
|
u_int8_t cmdsize :2; /* packet command size */
|
|
#define ATAPI_PSIZE_12 0 /* 12 bytes */
|
|
#define ATAPI_PSIZE_16 1 /* 16 bytes */
|
|
|
|
u_int8_t :3;
|
|
u_int8_t drqtype :2; /* DRQ type */
|
|
#define ATAPI_DRQT_MPROC 0 /* cpu 3 ms delay */
|
|
#define ATAPI_DRQT_INTR 1 /* intr 10 ms delay */
|
|
#define ATAPI_DRQT_ACCEL 2 /* accel 50 us delay */
|
|
|
|
u_int8_t removable :1; /* device is removable */
|
|
u_int8_t device_type :5; /* device type */
|
|
#define ATAPI_TYPE_DIRECT 0 /* disk/floppy */
|
|
#define ATAPI_TYPE_TAPE 1 /* streaming tape */
|
|
#define ATAPI_TYPE_CDROM 5 /* CD-ROM device */
|
|
#define ATAPI_TYPE_OPTICAL 7 /* optical disk */
|
|
|
|
u_int8_t :1;
|
|
u_int8_t proto :2; /* command protocol */
|
|
#define ATAPI_PROTO_ATAPI 2
|
|
|
|
u_int16_t cylinders; /* number of cylinders */
|
|
u_int16_t reserved2;
|
|
u_int16_t heads; /* # heads */
|
|
u_int16_t unfbytespertrk; /* # unformatted bytes/track */
|
|
u_int16_t unfbytes; /* # unformatted bytes/sector */
|
|
u_int16_t sectors; /* # sectors/track */
|
|
u_int16_t vendorunique0[3];
|
|
u_int8_t serial[20]; /* serial number */
|
|
u_int16_t buffertype; /* buffer type */
|
|
#define ATA_BT_SINGLEPORTSECTOR 1 /* 1 port, 1 sector buffer */
|
|
#define ATA_BT_DUALPORTMULTI 2 /* 2 port, mult sector buffer */
|
|
#define ATA_BT_DUALPORTMULTICACHE 3 /* above plus track cache */
|
|
|
|
u_int16_t buffersize; /* buf size, 512-byte units */
|
|
u_int16_t necc; /* ecc bytes appended */
|
|
u_int8_t revision[8]; /* firmware revision */
|
|
u_int8_t model[40]; /* model name */
|
|
u_int8_t nsecperint; /* sectors per interrupt */
|
|
u_int8_t vendorunique1;
|
|
u_int16_t usedmovsd; /* double word read/write? */
|
|
|
|
u_int8_t vendorcap; /* vendor capabilities */
|
|
u_int8_t dmaflag :1; /* DMA supported - always 1 */
|
|
u_int8_t lbaflag :1; /* LBA supported - always 1 */
|
|
u_int8_t iordydis :1; /* IORDY may be disabled */
|
|
u_int8_t iordyflag :1; /* IORDY supported */
|
|
u_int8_t softreset :1; /* needs softreset when busy */
|
|
u_int8_t stdby_ovlap :1; /* standby/overlap supported */
|
|
u_int8_t queueing :1; /* supports queuing overlap */
|
|
u_int8_t idmaflag :1; /* interleaved DMA supported */
|
|
u_int16_t capvalidate; /* validation for above */
|
|
|
|
u_int8_t vendorunique3;
|
|
u_int8_t opiomode; /* PIO modes 0-2 */
|
|
u_int8_t vendorunique4;
|
|
u_int8_t odmamode; /* old DMA modes, not ATA-3 */
|
|
|
|
u_int16_t atavalid; /* fields valid */
|
|
#define ATA_FLAG_54_58 1 /* words 54-58 valid */
|
|
#define ATA_FLAG_64_70 2 /* words 64-70 valid */
|
|
#define ATA_FLAG_88 4 /* word 88 valid */
|
|
|
|
u_int16_t currcyls;
|
|
u_int16_t currheads;
|
|
u_int16_t currsectors;
|
|
u_int16_t currsize0;
|
|
u_int16_t currsize1;
|
|
u_int8_t currmultsect;
|
|
u_int8_t multsectvalid;
|
|
u_int32_t lbasize;
|
|
|
|
u_int16_t sdmamodes; /* singleword DMA modes */
|
|
u_int16_t wdmamodes; /* multiword DMA modes */
|
|
u_int16_t apiomodes; /* advanced PIO modes */
|
|
|
|
u_int16_t mwdmamin; /* min. M/W DMA time/word ns */
|
|
u_int16_t mwdmarec; /* rec. M/W DMA time ns */
|
|
u_int16_t pioblind; /* min. PIO cycle w/o flow */
|
|
u_int16_t pioiordy; /* min. PIO cycle IORDY flow */
|
|
|
|
u_int16_t reserved69;
|
|
u_int16_t reserved70;
|
|
u_int16_t rlsovlap; /* rel time (us) for overlap */
|
|
u_int16_t rlsservice; /* rel time (us) for service */
|
|
u_int16_t reserved73;
|
|
u_int16_t reserved74;
|
|
u_int16_t queuelen:5;
|
|
u_int16_t :11;
|
|
u_int16_t reserved76;
|
|
u_int16_t reserved77;
|
|
u_int16_t reserved78;
|
|
u_int16_t reserved79;
|
|
u_int16_t versmajor;
|
|
u_int16_t versminor;
|
|
u_int16_t featsupp1; /* 82 */
|
|
u_int16_t supmicrocode:1;
|
|
u_int16_t supqueued:1;
|
|
u_int16_t supcfa:1;
|
|
u_int16_t supapm:1;
|
|
u_int16_t suprmsn:1;
|
|
u_int16_t :11;
|
|
u_int16_t featsupp3; /* 84 */
|
|
u_int16_t featenab1; /* 85 */
|
|
u_int16_t enabmicrocode:1;
|
|
u_int16_t enabqueued:1;
|
|
u_int16_t enabcfa:1;
|
|
u_int16_t enabapm:1;
|
|
u_int16_t enabrmsn:1;
|
|
u_int16_t :11;
|
|
u_int16_t featenab3; /* 87 */
|
|
u_int16_t udmamodes; /* UltraDMA modes */
|
|
u_int16_t erasetime;
|
|
u_int16_t enherasetime;
|
|
u_int16_t apmlevel;
|
|
u_int16_t masterpasswdrev;
|
|
u_int16_t masterhwres :8;
|
|
u_int16_t slavehwres :5;
|
|
u_int16_t cblid :1;
|
|
u_int16_t reserved93_1415 :2;
|
|
u_int16_t reserved94[32];
|
|
u_int16_t rmvstat;
|
|
u_int16_t securstat;
|
|
u_int16_t reserved129[30];
|
|
u_int16_t cfapwrmode;
|
|
u_int16_t reserved161[84];
|
|
u_int16_t integrity;
|
|
};
|
|
|
|
/* structure describing an ATA device */
|
|
struct ata_softc {
|
|
struct device *dev; /* device handle */
|
|
int channel; /* channel on this controller */
|
|
struct resource *r_io; /* io addr resource handle */
|
|
struct resource *r_altio; /* altio addr resource handle */
|
|
struct resource *r_bmio; /* bmio addr resource handle */
|
|
struct resource *r_irq; /* interrupt of this channel */
|
|
void *ih; /* interrupt handle */
|
|
u_int32_t ioaddr; /* physical port addr */
|
|
u_int32_t altioaddr; /* physical alt port addr */
|
|
u_int32_t bmaddr; /* physical bus master port */
|
|
u_int32_t chiptype; /* pciid of controller chip */
|
|
u_int32_t alignment; /* dma engine min alignment */
|
|
struct ata_params *dev_param[2]; /* ptr to devices params */
|
|
void *dev_softc[2]; /* ptr to devices softc's */
|
|
int mode[2]; /* transfer mode for devices */
|
|
#define ATA_PIO 0x00
|
|
#define ATA_PIO0 0x08
|
|
#define ATA_PIO1 0x09
|
|
#define ATA_PIO2 0x0a
|
|
#define ATA_PIO3 0x0b
|
|
#define ATA_PIO4 0x0c
|
|
#define ATA_DMA 0x10
|
|
#define ATA_WDMA2 0x22
|
|
#define ATA_UDMA2 0x42
|
|
#define ATA_UDMA4 0x44
|
|
#define ATA_UDMA5 0x45
|
|
|
|
int flags; /* controller flags */
|
|
#define ATA_DMA_ACTIVE 0x01
|
|
#define ATA_ATAPI_DMA_RO 0x02
|
|
#define ATA_USE_16BIT 0x04
|
|
#define ATA_NO_SLAVE 0x08
|
|
#define ATA_ATTACHED 0x10
|
|
#define ATA_QUEUED 0x20
|
|
|
|
int devices; /* what is present */
|
|
#define ATA_ATA_MASTER 0x01
|
|
#define ATA_ATA_SLAVE 0x02
|
|
#define ATA_ATAPI_MASTER 0x04
|
|
#define ATA_ATAPI_SLAVE 0x08
|
|
|
|
u_int8_t status; /* last controller status */
|
|
u_int8_t error; /* last controller error */
|
|
int active; /* active processing request */
|
|
#define ATA_IDLE 0x0
|
|
#define ATA_IMMEDIATE 0x1
|
|
#define ATA_WAIT_INTR 0x2
|
|
#define ATA_WAIT_READY 0x3
|
|
#define ATA_ACTIVE 0x4
|
|
#define ATA_ACTIVE_ATA 0x5
|
|
#define ATA_ACTIVE_ATAPI 0x6
|
|
#define ATA_REINITING 0x7
|
|
|
|
TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */
|
|
TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */
|
|
void *running; /* currently running request */
|
|
};
|
|
|
|
/* externs */
|
|
extern devclass_t ata_devclass;
|
|
|
|
/* public prototypes */
|
|
void ata_start(struct ata_softc *);
|
|
void ata_reset(struct ata_softc *, int *);
|
|
int ata_reinit(struct ata_softc *);
|
|
int ata_wait(struct ata_softc *, int, u_int8_t);
|
|
int ata_command(struct ata_softc *, int, u_int8_t, u_int16_t, u_int8_t, u_int8_t, u_int8_t, u_int8_t, int);
|
|
int ata_printf(struct ata_softc *, int, const char *, ...) __printflike(3, 4);
|
|
int ata_get_lun(u_int32_t *);
|
|
void ata_free_lun(u_int32_t *, int);
|
|
char *ata_mode2str(int);
|
|
int ata_pio2mode(int);
|
|
int ata_pmode(struct ata_params *);
|
|
int ata_wmode(struct ata_params *);
|
|
int ata_umode(struct ata_params *);
|
|
#if NPCI > 0
|
|
int ata_find_dev(device_t, u_int32_t, u_int32_t);
|
|
#endif
|
|
|
|
void *ata_dmaalloc(struct ata_softc *, int);
|
|
void ata_dmainit(struct ata_softc *, int, int, int, int);
|
|
int ata_dmasetup(struct ata_softc *, int, struct ata_dmaentry *, caddr_t, int);
|
|
void ata_dmastart(struct ata_softc *, int, struct ata_dmaentry *, int);
|
|
int ata_dmastatus(struct ata_softc *);
|
|
int ata_dmadone(struct ata_softc *);
|