f73b4006ff
After r285994, sysctl(8) was fixed to use 273.15 instead of 273.20 as 0C reference and as result, the temperature read in sysctl(8) now exibits a +0.1C difference. This commit fix the kernel references to match the reference value used in sysctl(8) after r285994. Sponsored by: Rubicon Communications (Netgate)
1620 lines
40 KiB
C
1620 lines
40 KiB
C
/*-
|
|
* Copyright (C) 2013-2015 Daisuke Aoyama <aoyama@peach.ne.jp>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/cpu.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/sema.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <arm/broadcom/bcm2835/bcm2835_mbox.h>
|
|
#include <arm/broadcom/bcm2835/bcm2835_mbox_prop.h>
|
|
#include <arm/broadcom/bcm2835/bcm2835_vcbus.h>
|
|
|
|
#include "cpufreq_if.h"
|
|
#include "mbox_if.h"
|
|
|
|
#ifdef DEBUG
|
|
#define DPRINTF(fmt, ...) do { \
|
|
printf("%s:%u: ", __func__, __LINE__); \
|
|
printf(fmt, ##__VA_ARGS__); \
|
|
} while (0)
|
|
#else
|
|
#define DPRINTF(fmt, ...)
|
|
#endif
|
|
|
|
#define HZ2MHZ(freq) ((freq) / (1000 * 1000))
|
|
#define MHZ2HZ(freq) ((freq) * (1000 * 1000))
|
|
|
|
#ifdef SOC_BCM2836
|
|
#define OFFSET2MVOLT(val) (((val) / 1000))
|
|
#define MVOLT2OFFSET(val) (((val) * 1000))
|
|
#define DEFAULT_ARM_FREQUENCY 600
|
|
#define DEFAULT_LOWEST_FREQ 600
|
|
#else
|
|
#define OFFSET2MVOLT(val) (1200 + ((val) * 25))
|
|
#define MVOLT2OFFSET(val) (((val) - 1200) / 25)
|
|
#define DEFAULT_ARM_FREQUENCY 700
|
|
#define DEFAULT_LOWEST_FREQ 300
|
|
#endif
|
|
#define DEFAULT_CORE_FREQUENCY 250
|
|
#define DEFAULT_SDRAM_FREQUENCY 400
|
|
#define TRANSITION_LATENCY 1000
|
|
#define MIN_OVER_VOLTAGE -16
|
|
#define MAX_OVER_VOLTAGE 6
|
|
#define MSG_ERROR -999999999
|
|
#define MHZSTEP 100
|
|
#define HZSTEP (MHZ2HZ(MHZSTEP))
|
|
#define TZ_ZEROC 2731
|
|
|
|
#define VC_LOCK(sc) do { \
|
|
sema_wait(&vc_sema); \
|
|
} while (0)
|
|
#define VC_UNLOCK(sc) do { \
|
|
sema_post(&vc_sema); \
|
|
} while (0)
|
|
|
|
/* ARM->VC mailbox property semaphore */
|
|
static struct sema vc_sema;
|
|
|
|
static struct sysctl_ctx_list bcm2835_sysctl_ctx;
|
|
|
|
struct bcm2835_cpufreq_softc {
|
|
device_t dev;
|
|
int arm_max_freq;
|
|
int arm_min_freq;
|
|
int core_max_freq;
|
|
int core_min_freq;
|
|
int sdram_max_freq;
|
|
int sdram_min_freq;
|
|
int max_voltage_core;
|
|
int min_voltage_core;
|
|
|
|
/* the values written in mbox */
|
|
int voltage_core;
|
|
int voltage_sdram;
|
|
int voltage_sdram_c;
|
|
int voltage_sdram_i;
|
|
int voltage_sdram_p;
|
|
int turbo_mode;
|
|
|
|
/* initial hook for waiting mbox intr */
|
|
struct intr_config_hook init_hook;
|
|
};
|
|
|
|
static int cpufreq_verbose = 0;
|
|
TUNABLE_INT("hw.bcm2835.cpufreq.verbose", &cpufreq_verbose);
|
|
static int cpufreq_lowest_freq = DEFAULT_LOWEST_FREQ;
|
|
TUNABLE_INT("hw.bcm2835.cpufreq.lowest_freq", &cpufreq_lowest_freq);
|
|
|
|
#ifdef PROP_DEBUG
|
|
static void
|
|
bcm2835_dump(const void *data, int len)
|
|
{
|
|
const uint8_t *p = (const uint8_t*)data;
|
|
int i;
|
|
|
|
printf("dump @ %p:\n", data);
|
|
for (i = 0; i < len; i++) {
|
|
printf("%2.2x ", p[i]);
|
|
if ((i % 4) == 3)
|
|
printf(" ");
|
|
if ((i % 16) == 15)
|
|
printf("\n");
|
|
}
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
bcm2835_cpufreq_get_clock_rate(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t clock_id)
|
|
{
|
|
struct msg_get_clock_rate msg;
|
|
int rate;
|
|
int err;
|
|
|
|
/*
|
|
* Get clock rate
|
|
* Tag: 0x00030002
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: clock id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: clock id
|
|
* u32: rate (in Hz)
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_CLOCK_RATE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.clock_id = clock_id;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get clock rate (id=%u)\n",
|
|
clock_id);
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (Hz) */
|
|
rate = (int)msg.body.resp.rate_hz;
|
|
DPRINTF("clock = %d(Hz)\n", rate);
|
|
return (rate);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_get_max_clock_rate(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t clock_id)
|
|
{
|
|
struct msg_get_max_clock_rate msg;
|
|
int rate;
|
|
int err;
|
|
|
|
/*
|
|
* Get max clock rate
|
|
* Tag: 0x00030004
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: clock id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: clock id
|
|
* u32: rate (in Hz)
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MAX_CLOCK_RATE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.clock_id = clock_id;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get max clock rate (id=%u)\n",
|
|
clock_id);
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (Hz) */
|
|
rate = (int)msg.body.resp.rate_hz;
|
|
DPRINTF("clock = %d(Hz)\n", rate);
|
|
return (rate);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_get_min_clock_rate(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t clock_id)
|
|
{
|
|
struct msg_get_min_clock_rate msg;
|
|
int rate;
|
|
int err;
|
|
|
|
/*
|
|
* Get min clock rate
|
|
* Tag: 0x00030007
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: clock id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: clock id
|
|
* u32: rate (in Hz)
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MIN_CLOCK_RATE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.clock_id = clock_id;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get min clock rate (id=%u)\n",
|
|
clock_id);
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (Hz) */
|
|
rate = (int)msg.body.resp.rate_hz;
|
|
DPRINTF("clock = %d(Hz)\n", rate);
|
|
return (rate);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_set_clock_rate(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t clock_id, uint32_t rate_hz)
|
|
{
|
|
struct msg_set_clock_rate msg;
|
|
int rate;
|
|
int err;
|
|
|
|
/*
|
|
* Set clock rate
|
|
* Tag: 0x00038002
|
|
* Request:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: clock id
|
|
* u32: rate (in Hz)
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: clock id
|
|
* u32: rate (in Hz)
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_CLOCK_RATE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.clock_id = clock_id;
|
|
msg.body.req.rate_hz = rate_hz;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't set clock rate (id=%u)\n",
|
|
clock_id);
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* workaround for core clock */
|
|
if (clock_id == BCM2835_MBOX_CLOCK_ID_CORE) {
|
|
/* for safety (may change voltage without changing clock) */
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
/*
|
|
* XXX: the core clock is unable to change at once,
|
|
* to change certainly, write it twice now.
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_CLOCK_RATE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.clock_id = clock_id;
|
|
msg.body.req.rate_hz = rate_hz;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev,
|
|
"can't set clock rate (id=%u)\n", clock_id);
|
|
return (MSG_ERROR);
|
|
}
|
|
}
|
|
|
|
/* result (Hz) */
|
|
rate = (int)msg.body.resp.rate_hz;
|
|
DPRINTF("clock = %d(Hz)\n", rate);
|
|
return (rate);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_get_turbo(struct bcm2835_cpufreq_softc *sc)
|
|
{
|
|
struct msg_get_turbo msg;
|
|
int level;
|
|
int err;
|
|
|
|
/*
|
|
* Get turbo
|
|
* Tag: 0x00030009
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: id
|
|
* u32: level
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_TURBO;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.id = 0;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get turbo\n");
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result 0=non-turbo, 1=turbo */
|
|
level = (int)msg.body.resp.level;
|
|
DPRINTF("level = %d\n", level);
|
|
return (level);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_set_turbo(struct bcm2835_cpufreq_softc *sc, uint32_t level)
|
|
{
|
|
struct msg_set_turbo msg;
|
|
int value;
|
|
int err;
|
|
|
|
/*
|
|
* Set turbo
|
|
* Tag: 0x00038009
|
|
* Request:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: id
|
|
* u32: level
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: id
|
|
* u32: level
|
|
*/
|
|
|
|
/* replace unknown value to OFF */
|
|
if (level != BCM2835_MBOX_TURBO_ON && level != BCM2835_MBOX_TURBO_OFF)
|
|
level = BCM2835_MBOX_TURBO_OFF;
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_TURBO;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.id = 0;
|
|
msg.body.req.level = level;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't set turbo\n");
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result 0=non-turbo, 1=turbo */
|
|
value = (int)msg.body.resp.level;
|
|
DPRINTF("level = %d\n", value);
|
|
return (value);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_get_voltage(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t voltage_id)
|
|
{
|
|
struct msg_get_voltage msg;
|
|
int value;
|
|
int err;
|
|
|
|
/*
|
|
* Get voltage
|
|
* Tag: 0x00030003
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: voltage id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: voltage id
|
|
* u32: value (offset from 1.2V in units of 0.025V)
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_VOLTAGE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.voltage_id = voltage_id;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get voltage\n");
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (offset from 1.2V) */
|
|
value = (int)msg.body.resp.value;
|
|
DPRINTF("value = %d\n", value);
|
|
return (value);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_get_max_voltage(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t voltage_id)
|
|
{
|
|
struct msg_get_max_voltage msg;
|
|
int value;
|
|
int err;
|
|
|
|
/*
|
|
* Get voltage
|
|
* Tag: 0x00030005
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: voltage id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: voltage id
|
|
* u32: value (offset from 1.2V in units of 0.025V)
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MAX_VOLTAGE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.voltage_id = voltage_id;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get max voltage\n");
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (offset from 1.2V) */
|
|
value = (int)msg.body.resp.value;
|
|
DPRINTF("value = %d\n", value);
|
|
return (value);
|
|
}
|
|
static int
|
|
bcm2835_cpufreq_get_min_voltage(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t voltage_id)
|
|
{
|
|
struct msg_get_min_voltage msg;
|
|
int value;
|
|
int err;
|
|
|
|
/*
|
|
* Get voltage
|
|
* Tag: 0x00030008
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: voltage id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: voltage id
|
|
* u32: value (offset from 1.2V in units of 0.025V)
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MIN_VOLTAGE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.voltage_id = voltage_id;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get min voltage\n");
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (offset from 1.2V) */
|
|
value = (int)msg.body.resp.value;
|
|
DPRINTF("value = %d\n", value);
|
|
return (value);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_set_voltage(struct bcm2835_cpufreq_softc *sc,
|
|
uint32_t voltage_id, int32_t value)
|
|
{
|
|
struct msg_set_voltage msg;
|
|
int err;
|
|
|
|
/*
|
|
* Set voltage
|
|
* Tag: 0x00038003
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: voltage id
|
|
* u32: value (offset from 1.2V in units of 0.025V)
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: voltage id
|
|
* u32: value (offset from 1.2V in units of 0.025V)
|
|
*/
|
|
|
|
/*
|
|
* over_voltage:
|
|
* 0 (1.2 V). Values above 6 are only allowed when force_turbo or
|
|
* current_limit_override are specified (which set the warranty bit).
|
|
*/
|
|
if (value > MAX_OVER_VOLTAGE || value < MIN_OVER_VOLTAGE) {
|
|
/* currently not supported */
|
|
device_printf(sc->dev, "not supported voltage: %d\n", value);
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_VOLTAGE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.voltage_id = voltage_id;
|
|
msg.body.req.value = (uint32_t)value;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't set voltage\n");
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (offset from 1.2V) */
|
|
value = (int)msg.body.resp.value;
|
|
DPRINTF("value = %d\n", value);
|
|
return (value);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_get_temperature(struct bcm2835_cpufreq_softc *sc)
|
|
{
|
|
struct msg_get_temperature msg;
|
|
int value;
|
|
int err;
|
|
|
|
/*
|
|
* Get temperature
|
|
* Tag: 0x00030006
|
|
* Request:
|
|
* Length: 4
|
|
* Value:
|
|
* u32: temperature id
|
|
* Response:
|
|
* Length: 8
|
|
* Value:
|
|
* u32: temperature id
|
|
* u32: value
|
|
*/
|
|
|
|
/* setup single tag buffer */
|
|
memset(&msg, 0, sizeof(msg));
|
|
msg.hdr.buf_size = sizeof(msg);
|
|
msg.hdr.code = BCM2835_MBOX_CODE_REQ;
|
|
msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_TEMPERATURE;
|
|
msg.tag_hdr.val_buf_size = sizeof(msg.body);
|
|
msg.tag_hdr.val_len = sizeof(msg.body.req);
|
|
msg.body.req.temperature_id = 0;
|
|
msg.end_tag = 0;
|
|
|
|
/* call mailbox property */
|
|
err = bcm2835_mbox_property(&msg, sizeof(msg));
|
|
if (err) {
|
|
device_printf(sc->dev, "can't get temperature\n");
|
|
return (MSG_ERROR);
|
|
}
|
|
|
|
/* result (temperature of degree C) */
|
|
value = (int)msg.body.resp.value;
|
|
DPRINTF("value = %d\n", value);
|
|
return (value);
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_arm_freq(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM,
|
|
val);
|
|
VC_UNLOCK(sc);
|
|
if (err == MSG_ERROR) {
|
|
device_printf(sc->dev, "set clock arm_freq error\n");
|
|
return (EIO);
|
|
}
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_core_freq(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE,
|
|
val);
|
|
if (err == MSG_ERROR) {
|
|
VC_UNLOCK(sc);
|
|
device_printf(sc->dev, "set clock core_freq error\n");
|
|
return (EIO);
|
|
}
|
|
VC_UNLOCK(sc);
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_sdram_freq(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_SDRAM);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_SDRAM,
|
|
val);
|
|
VC_UNLOCK(sc);
|
|
if (err == MSG_ERROR) {
|
|
device_printf(sc->dev, "set clock sdram_freq error\n");
|
|
return (EIO);
|
|
}
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_turbo(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_turbo(sc);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
if (val > 0)
|
|
sc->turbo_mode = BCM2835_MBOX_TURBO_ON;
|
|
else
|
|
sc->turbo_mode = BCM2835_MBOX_TURBO_OFF;
|
|
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_turbo(sc, sc->turbo_mode);
|
|
VC_UNLOCK(sc);
|
|
if (err == MSG_ERROR) {
|
|
device_printf(sc->dev, "set turbo error\n");
|
|
return (EIO);
|
|
}
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_voltage_core(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_CORE);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE)
|
|
return (EINVAL);
|
|
sc->voltage_core = val;
|
|
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_CORE,
|
|
sc->voltage_core);
|
|
VC_UNLOCK(sc);
|
|
if (err == MSG_ERROR) {
|
|
device_printf(sc->dev, "set voltage core error\n");
|
|
return (EIO);
|
|
}
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_voltage_sdram_c(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_C);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE)
|
|
return (EINVAL);
|
|
sc->voltage_sdram_c = val;
|
|
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_C,
|
|
sc->voltage_sdram_c);
|
|
VC_UNLOCK(sc);
|
|
if (err == MSG_ERROR) {
|
|
device_printf(sc->dev, "set voltage sdram_c error\n");
|
|
return (EIO);
|
|
}
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_voltage_sdram_i(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_I);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE)
|
|
return (EINVAL);
|
|
sc->voltage_sdram_i = val;
|
|
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_I,
|
|
sc->voltage_sdram_i);
|
|
VC_UNLOCK(sc);
|
|
if (err == MSG_ERROR) {
|
|
device_printf(sc->dev, "set voltage sdram_i error\n");
|
|
return (EIO);
|
|
}
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_voltage_sdram_p(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_P);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE)
|
|
return (EINVAL);
|
|
sc->voltage_sdram_p = val;
|
|
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_P,
|
|
sc->voltage_sdram_p);
|
|
VC_UNLOCK(sc);
|
|
if (err == MSG_ERROR) {
|
|
device_printf(sc->dev, "set voltage sdram_p error\n");
|
|
return (EIO);
|
|
}
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_voltage_sdram(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* multiple write only */
|
|
if (!req->newptr)
|
|
return (EINVAL);
|
|
val = 0;
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err)
|
|
return (err);
|
|
|
|
/* write request */
|
|
if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE)
|
|
return (EINVAL);
|
|
sc->voltage_sdram = val;
|
|
|
|
VC_LOCK(sc);
|
|
err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_C,
|
|
val);
|
|
if (err == MSG_ERROR) {
|
|
VC_UNLOCK(sc);
|
|
device_printf(sc->dev, "set voltage sdram_c error\n");
|
|
return (EIO);
|
|
}
|
|
err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_I,
|
|
val);
|
|
if (err == MSG_ERROR) {
|
|
VC_UNLOCK(sc);
|
|
device_printf(sc->dev, "set voltage sdram_i error\n");
|
|
return (EIO);
|
|
}
|
|
err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_P,
|
|
val);
|
|
if (err == MSG_ERROR) {
|
|
VC_UNLOCK(sc);
|
|
device_printf(sc->dev, "set voltage sdram_p error\n");
|
|
return (EIO);
|
|
}
|
|
VC_UNLOCK(sc);
|
|
DELAY(TRANSITION_LATENCY);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_cpufreq_temperature(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_temperature(sc);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
return (EINVAL);
|
|
}
|
|
|
|
static int
|
|
sysctl_bcm2835_devcpu_temperature(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg1;
|
|
int val;
|
|
int err;
|
|
|
|
/* get realtime value */
|
|
VC_LOCK(sc);
|
|
val = bcm2835_cpufreq_get_temperature(sc);
|
|
VC_UNLOCK(sc);
|
|
if (val == MSG_ERROR)
|
|
return (EIO);
|
|
|
|
/* 1/1000 celsius (raw) to 1/10 kelvin */
|
|
val = val / 100 + TZ_ZEROC;
|
|
|
|
err = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (err || !req->newptr) /* error || read request */
|
|
return (err);
|
|
|
|
/* write request */
|
|
return (EINVAL);
|
|
}
|
|
|
|
|
|
static void
|
|
bcm2835_cpufreq_init(void *arg)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc = arg;
|
|
struct sysctl_ctx_list *ctx;
|
|
device_t cpu;
|
|
int arm_freq, core_freq, sdram_freq;
|
|
int arm_max_freq, arm_min_freq, core_max_freq, core_min_freq;
|
|
int sdram_max_freq, sdram_min_freq;
|
|
int voltage_core, voltage_sdram_c, voltage_sdram_i, voltage_sdram_p;
|
|
int max_voltage_core, min_voltage_core;
|
|
int max_voltage_sdram_c, min_voltage_sdram_c;
|
|
int max_voltage_sdram_i, min_voltage_sdram_i;
|
|
int max_voltage_sdram_p, min_voltage_sdram_p;
|
|
int turbo, temperature;
|
|
|
|
VC_LOCK(sc);
|
|
|
|
/* current clock */
|
|
arm_freq = bcm2835_cpufreq_get_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_ARM);
|
|
core_freq = bcm2835_cpufreq_get_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_CORE);
|
|
sdram_freq = bcm2835_cpufreq_get_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_SDRAM);
|
|
|
|
/* max/min clock */
|
|
arm_max_freq = bcm2835_cpufreq_get_max_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_ARM);
|
|
arm_min_freq = bcm2835_cpufreq_get_min_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_ARM);
|
|
core_max_freq = bcm2835_cpufreq_get_max_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_CORE);
|
|
core_min_freq = bcm2835_cpufreq_get_min_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_CORE);
|
|
sdram_max_freq = bcm2835_cpufreq_get_max_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_SDRAM);
|
|
sdram_min_freq = bcm2835_cpufreq_get_min_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_SDRAM);
|
|
|
|
/* turbo mode */
|
|
turbo = bcm2835_cpufreq_get_turbo(sc);
|
|
if (turbo > 0)
|
|
sc->turbo_mode = BCM2835_MBOX_TURBO_ON;
|
|
else
|
|
sc->turbo_mode = BCM2835_MBOX_TURBO_OFF;
|
|
|
|
/* voltage */
|
|
voltage_core = bcm2835_cpufreq_get_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_CORE);
|
|
voltage_sdram_c = bcm2835_cpufreq_get_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_C);
|
|
voltage_sdram_i = bcm2835_cpufreq_get_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_I);
|
|
voltage_sdram_p = bcm2835_cpufreq_get_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_P);
|
|
|
|
/* current values (offset from 1.2V) */
|
|
sc->voltage_core = voltage_core;
|
|
sc->voltage_sdram = voltage_sdram_c;
|
|
sc->voltage_sdram_c = voltage_sdram_c;
|
|
sc->voltage_sdram_i = voltage_sdram_i;
|
|
sc->voltage_sdram_p = voltage_sdram_p;
|
|
|
|
/* max/min voltage */
|
|
max_voltage_core = bcm2835_cpufreq_get_max_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_CORE);
|
|
min_voltage_core = bcm2835_cpufreq_get_min_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_CORE);
|
|
max_voltage_sdram_c = bcm2835_cpufreq_get_max_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_C);
|
|
max_voltage_sdram_i = bcm2835_cpufreq_get_max_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_I);
|
|
max_voltage_sdram_p = bcm2835_cpufreq_get_max_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_P);
|
|
min_voltage_sdram_c = bcm2835_cpufreq_get_min_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_C);
|
|
min_voltage_sdram_i = bcm2835_cpufreq_get_min_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_I);
|
|
min_voltage_sdram_p = bcm2835_cpufreq_get_min_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_SDRAM_P);
|
|
|
|
/* temperature */
|
|
temperature = bcm2835_cpufreq_get_temperature(sc);
|
|
|
|
/* show result */
|
|
if (cpufreq_verbose || bootverbose) {
|
|
device_printf(sc->dev, "Boot settings:\n");
|
|
device_printf(sc->dev,
|
|
"current ARM %dMHz, Core %dMHz, SDRAM %dMHz, Turbo %s\n",
|
|
HZ2MHZ(arm_freq), HZ2MHZ(core_freq), HZ2MHZ(sdram_freq),
|
|
(sc->turbo_mode == BCM2835_MBOX_TURBO_ON) ? "ON" : "OFF");
|
|
|
|
device_printf(sc->dev,
|
|
"max/min ARM %d/%dMHz, Core %d/%dMHz, SDRAM %d/%dMHz\n",
|
|
HZ2MHZ(arm_max_freq), HZ2MHZ(arm_min_freq),
|
|
HZ2MHZ(core_max_freq), HZ2MHZ(core_min_freq),
|
|
HZ2MHZ(sdram_max_freq), HZ2MHZ(sdram_min_freq));
|
|
|
|
device_printf(sc->dev,
|
|
"current Core %dmV, SDRAM_C %dmV, SDRAM_I %dmV, "
|
|
"SDRAM_P %dmV\n",
|
|
OFFSET2MVOLT(voltage_core), OFFSET2MVOLT(voltage_sdram_c),
|
|
OFFSET2MVOLT(voltage_sdram_i),
|
|
OFFSET2MVOLT(voltage_sdram_p));
|
|
|
|
device_printf(sc->dev,
|
|
"max/min Core %d/%dmV, SDRAM_C %d/%dmV, SDRAM_I %d/%dmV, "
|
|
"SDRAM_P %d/%dmV\n",
|
|
OFFSET2MVOLT(max_voltage_core),
|
|
OFFSET2MVOLT(min_voltage_core),
|
|
OFFSET2MVOLT(max_voltage_sdram_c),
|
|
OFFSET2MVOLT(min_voltage_sdram_c),
|
|
OFFSET2MVOLT(max_voltage_sdram_i),
|
|
OFFSET2MVOLT(min_voltage_sdram_i),
|
|
OFFSET2MVOLT(max_voltage_sdram_p),
|
|
OFFSET2MVOLT(min_voltage_sdram_p));
|
|
|
|
device_printf(sc->dev,
|
|
"Temperature %d.%dC\n", (temperature / 1000),
|
|
(temperature % 1000) / 100);
|
|
} else { /* !cpufreq_verbose && !bootverbose */
|
|
device_printf(sc->dev,
|
|
"ARM %dMHz, Core %dMHz, SDRAM %dMHz, Turbo %s\n",
|
|
HZ2MHZ(arm_freq), HZ2MHZ(core_freq), HZ2MHZ(sdram_freq),
|
|
(sc->turbo_mode == BCM2835_MBOX_TURBO_ON) ? "ON" : "OFF");
|
|
}
|
|
|
|
/* keep in softc (MHz/mV) */
|
|
sc->arm_max_freq = HZ2MHZ(arm_max_freq);
|
|
sc->arm_min_freq = HZ2MHZ(arm_min_freq);
|
|
sc->core_max_freq = HZ2MHZ(core_max_freq);
|
|
sc->core_min_freq = HZ2MHZ(core_min_freq);
|
|
sc->sdram_max_freq = HZ2MHZ(sdram_max_freq);
|
|
sc->sdram_min_freq = HZ2MHZ(sdram_min_freq);
|
|
sc->max_voltage_core = OFFSET2MVOLT(max_voltage_core);
|
|
sc->min_voltage_core = OFFSET2MVOLT(min_voltage_core);
|
|
|
|
/* if turbo is on, set to max values */
|
|
if (sc->turbo_mode == BCM2835_MBOX_TURBO_ON) {
|
|
bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM,
|
|
arm_max_freq);
|
|
DELAY(TRANSITION_LATENCY);
|
|
bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE,
|
|
core_max_freq);
|
|
DELAY(TRANSITION_LATENCY);
|
|
bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_SDRAM, sdram_max_freq);
|
|
DELAY(TRANSITION_LATENCY);
|
|
} else {
|
|
bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM,
|
|
arm_min_freq);
|
|
DELAY(TRANSITION_LATENCY);
|
|
bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE,
|
|
core_min_freq);
|
|
DELAY(TRANSITION_LATENCY);
|
|
bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_SDRAM, sdram_min_freq);
|
|
DELAY(TRANSITION_LATENCY);
|
|
}
|
|
|
|
VC_UNLOCK(sc);
|
|
|
|
/* add human readable temperature to dev.cpu node */
|
|
cpu = device_get_parent(sc->dev);
|
|
if (cpu != NULL) {
|
|
ctx = device_get_sysctl_ctx(cpu);
|
|
SYSCTL_ADD_PROC(ctx,
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(cpu)), OID_AUTO,
|
|
"temperature", CTLTYPE_INT | CTLFLAG_RD, sc, 0,
|
|
sysctl_bcm2835_devcpu_temperature, "IK",
|
|
"Current SoC temperature");
|
|
}
|
|
|
|
/* release this hook (continue boot) */
|
|
config_intrhook_disestablish(&sc->init_hook);
|
|
}
|
|
|
|
static void
|
|
bcm2835_cpufreq_identify(driver_t *driver, device_t parent)
|
|
{
|
|
|
|
DPRINTF("driver=%p, parent=%p\n", driver, parent);
|
|
if (device_find_child(parent, "bcm2835_cpufreq", -1) != NULL)
|
|
return;
|
|
if (BUS_ADD_CHILD(parent, 0, "bcm2835_cpufreq", -1) == NULL)
|
|
device_printf(parent, "add child failed\n");
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_probe(device_t dev)
|
|
{
|
|
|
|
if (device_get_unit(dev) != 0)
|
|
return (ENXIO);
|
|
device_set_desc(dev, "CPU Frequency Control");
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_attach(device_t dev)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc;
|
|
struct sysctl_oid *oid;
|
|
|
|
/* set self dev */
|
|
sc = device_get_softc(dev);
|
|
sc->dev = dev;
|
|
|
|
/* initial values */
|
|
sc->arm_max_freq = -1;
|
|
sc->arm_min_freq = -1;
|
|
sc->core_max_freq = -1;
|
|
sc->core_min_freq = -1;
|
|
sc->sdram_max_freq = -1;
|
|
sc->sdram_min_freq = -1;
|
|
sc->max_voltage_core = 0;
|
|
sc->min_voltage_core = 0;
|
|
|
|
/* setup sysctl at first device */
|
|
if (device_get_unit(dev) == 0) {
|
|
sysctl_ctx_init(&bcm2835_sysctl_ctx);
|
|
/* create node for hw.cpufreq */
|
|
oid = SYSCTL_ADD_NODE(&bcm2835_sysctl_ctx,
|
|
SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO, "cpufreq",
|
|
CTLFLAG_RD, NULL, "");
|
|
|
|
/* Frequency (Hz) */
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "arm_freq", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
|
|
sysctl_bcm2835_cpufreq_arm_freq, "IU",
|
|
"ARM frequency (Hz)");
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "core_freq", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
|
|
sysctl_bcm2835_cpufreq_core_freq, "IU",
|
|
"Core frequency (Hz)");
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "sdram_freq", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
|
|
sysctl_bcm2835_cpufreq_sdram_freq, "IU",
|
|
"SDRAM frequency (Hz)");
|
|
|
|
/* Turbo state */
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "turbo", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
|
|
sysctl_bcm2835_cpufreq_turbo, "IU",
|
|
"Disables dynamic clocking");
|
|
|
|
/* Voltage (offset from 1.2V in units of 0.025V) */
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "voltage_core", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
|
|
sysctl_bcm2835_cpufreq_voltage_core, "I",
|
|
"ARM/GPU core voltage"
|
|
"(offset from 1.2V in units of 0.025V)");
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "voltage_sdram", CTLTYPE_INT | CTLFLAG_WR, sc,
|
|
0, sysctl_bcm2835_cpufreq_voltage_sdram, "I",
|
|
"SDRAM voltage (offset from 1.2V in units of 0.025V)");
|
|
|
|
/* Voltage individual SDRAM */
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "voltage_sdram_c", CTLTYPE_INT | CTLFLAG_RW, sc,
|
|
0, sysctl_bcm2835_cpufreq_voltage_sdram_c, "I",
|
|
"SDRAM controller voltage"
|
|
"(offset from 1.2V in units of 0.025V)");
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "voltage_sdram_i", CTLTYPE_INT | CTLFLAG_RW, sc,
|
|
0, sysctl_bcm2835_cpufreq_voltage_sdram_i, "I",
|
|
"SDRAM I/O voltage (offset from 1.2V in units of 0.025V)");
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "voltage_sdram_p", CTLTYPE_INT | CTLFLAG_RW, sc,
|
|
0, sysctl_bcm2835_cpufreq_voltage_sdram_p, "I",
|
|
"SDRAM phy voltage (offset from 1.2V in units of 0.025V)");
|
|
|
|
/* Temperature */
|
|
SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid),
|
|
OID_AUTO, "temperature", CTLTYPE_INT | CTLFLAG_RD, sc, 0,
|
|
sysctl_bcm2835_cpufreq_temperature, "I",
|
|
"SoC temperature (thousandths of a degree C)");
|
|
}
|
|
|
|
/* ARM->VC lock */
|
|
sema_init(&vc_sema, 1, "vcsema");
|
|
|
|
/* register callback for using mbox when interrupts are enabled */
|
|
sc->init_hook.ich_func = bcm2835_cpufreq_init;
|
|
sc->init_hook.ich_arg = sc;
|
|
|
|
if (config_intrhook_establish(&sc->init_hook) != 0) {
|
|
device_printf(dev, "config_intrhook_establish failed\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* this device is controlled by cpufreq(4) */
|
|
cpufreq_register(dev);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_detach(device_t dev)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
sema_destroy(&vc_sema);
|
|
|
|
return (cpufreq_unregister(dev));
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_set(device_t dev, const struct cf_setting *cf)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc;
|
|
uint32_t rate_hz, rem;
|
|
int cur_freq, resp_freq, arm_freq, min_freq, core_freq;
|
|
|
|
if (cf == NULL || cf->freq < 0)
|
|
return (EINVAL);
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* setting clock (Hz) */
|
|
rate_hz = (uint32_t)MHZ2HZ(cf->freq);
|
|
rem = rate_hz % HZSTEP;
|
|
rate_hz -= rem;
|
|
if (rate_hz == 0)
|
|
return (EINVAL);
|
|
|
|
/* adjust min freq */
|
|
min_freq = sc->arm_min_freq;
|
|
if (sc->turbo_mode != BCM2835_MBOX_TURBO_ON)
|
|
if (min_freq > cpufreq_lowest_freq)
|
|
min_freq = cpufreq_lowest_freq;
|
|
|
|
if (rate_hz < MHZ2HZ(min_freq) || rate_hz > MHZ2HZ(sc->arm_max_freq))
|
|
return (EINVAL);
|
|
|
|
/* set new value and verify it */
|
|
VC_LOCK(sc);
|
|
cur_freq = bcm2835_cpufreq_get_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_ARM);
|
|
resp_freq = bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_ARM, rate_hz);
|
|
DELAY(TRANSITION_LATENCY);
|
|
arm_freq = bcm2835_cpufreq_get_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_ARM);
|
|
|
|
/*
|
|
* if non-turbo and lower than or equal min_freq,
|
|
* clock down core and sdram to default first.
|
|
*/
|
|
if (sc->turbo_mode != BCM2835_MBOX_TURBO_ON) {
|
|
core_freq = bcm2835_cpufreq_get_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_CORE);
|
|
if (rate_hz > MHZ2HZ(sc->arm_min_freq)) {
|
|
bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_CORE,
|
|
MHZ2HZ(sc->core_max_freq));
|
|
DELAY(TRANSITION_LATENCY);
|
|
bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_SDRAM,
|
|
MHZ2HZ(sc->sdram_max_freq));
|
|
DELAY(TRANSITION_LATENCY);
|
|
} else {
|
|
if (sc->core_min_freq < DEFAULT_CORE_FREQUENCY &&
|
|
core_freq > DEFAULT_CORE_FREQUENCY) {
|
|
/* first, down to 250, then down to min */
|
|
DELAY(TRANSITION_LATENCY);
|
|
bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_CORE,
|
|
MHZ2HZ(DEFAULT_CORE_FREQUENCY));
|
|
DELAY(TRANSITION_LATENCY);
|
|
/* reset core voltage */
|
|
bcm2835_cpufreq_set_voltage(sc,
|
|
BCM2835_MBOX_VOLTAGE_ID_CORE, 0);
|
|
DELAY(TRANSITION_LATENCY);
|
|
}
|
|
bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_CORE,
|
|
MHZ2HZ(sc->core_min_freq));
|
|
DELAY(TRANSITION_LATENCY);
|
|
bcm2835_cpufreq_set_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_SDRAM,
|
|
MHZ2HZ(sc->sdram_min_freq));
|
|
DELAY(TRANSITION_LATENCY);
|
|
}
|
|
}
|
|
|
|
VC_UNLOCK(sc);
|
|
|
|
if (resp_freq < 0 || arm_freq < 0 || resp_freq != arm_freq) {
|
|
device_printf(dev, "wrong freq\n");
|
|
return (EIO);
|
|
}
|
|
DPRINTF("cpufreq: %d -> %d\n", cur_freq, arm_freq);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_get(device_t dev, struct cf_setting *cf)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc;
|
|
int arm_freq;
|
|
|
|
if (cf == NULL)
|
|
return (EINVAL);
|
|
|
|
sc = device_get_softc(dev);
|
|
memset(cf, CPUFREQ_VAL_UNKNOWN, sizeof(*cf));
|
|
cf->dev = NULL;
|
|
|
|
/* get cuurent value */
|
|
VC_LOCK(sc);
|
|
arm_freq = bcm2835_cpufreq_get_clock_rate(sc,
|
|
BCM2835_MBOX_CLOCK_ID_ARM);
|
|
VC_UNLOCK(sc);
|
|
if (arm_freq < 0) {
|
|
device_printf(dev, "can't get clock\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* CPU clock in MHz or 100ths of a percent. */
|
|
cf->freq = HZ2MHZ(arm_freq);
|
|
/* Voltage in mV. */
|
|
cf->volts = CPUFREQ_VAL_UNKNOWN;
|
|
/* Power consumed in mW. */
|
|
cf->power = CPUFREQ_VAL_UNKNOWN;
|
|
/* Transition latency in us. */
|
|
cf->lat = TRANSITION_LATENCY;
|
|
/* Driver providing this setting. */
|
|
cf->dev = dev;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_make_freq_list(device_t dev, struct cf_setting *sets,
|
|
int *count)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc;
|
|
int freq, min_freq, volts, rem;
|
|
int idx;
|
|
|
|
sc = device_get_softc(dev);
|
|
freq = sc->arm_max_freq;
|
|
min_freq = sc->arm_min_freq;
|
|
|
|
/* adjust head freq to STEP */
|
|
rem = freq % MHZSTEP;
|
|
freq -= rem;
|
|
if (freq < min_freq)
|
|
freq = min_freq;
|
|
|
|
/* if non-turbo, add extra low freq */
|
|
if (sc->turbo_mode != BCM2835_MBOX_TURBO_ON)
|
|
if (min_freq > cpufreq_lowest_freq)
|
|
min_freq = cpufreq_lowest_freq;
|
|
|
|
#ifdef SOC_BCM2836
|
|
/* XXX RPi2 have only 900/600MHz */
|
|
idx = 0;
|
|
volts = sc->min_voltage_core;
|
|
sets[idx].freq = freq;
|
|
sets[idx].volts = volts;
|
|
sets[idx].lat = TRANSITION_LATENCY;
|
|
sets[idx].dev = dev;
|
|
idx++;
|
|
if (freq != min_freq) {
|
|
sets[idx].freq = min_freq;
|
|
sets[idx].volts = volts;
|
|
sets[idx].lat = TRANSITION_LATENCY;
|
|
sets[idx].dev = dev;
|
|
idx++;
|
|
}
|
|
#else
|
|
/* from freq to min_freq */
|
|
for (idx = 0; idx < *count && freq >= min_freq; idx++) {
|
|
if (freq > sc->arm_min_freq)
|
|
volts = sc->max_voltage_core;
|
|
else
|
|
volts = sc->min_voltage_core;
|
|
sets[idx].freq = freq;
|
|
sets[idx].volts = volts;
|
|
sets[idx].lat = TRANSITION_LATENCY;
|
|
sets[idx].dev = dev;
|
|
freq -= MHZSTEP;
|
|
}
|
|
#endif
|
|
*count = idx;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_settings(device_t dev, struct cf_setting *sets, int *count)
|
|
{
|
|
struct bcm2835_cpufreq_softc *sc;
|
|
|
|
if (sets == NULL || count == NULL)
|
|
return (EINVAL);
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->arm_min_freq < 0 || sc->arm_max_freq < 0) {
|
|
printf("device is not configured\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* fill data with unknown value */
|
|
memset(sets, CPUFREQ_VAL_UNKNOWN, sizeof(*sets) * (*count));
|
|
/* create new array up to count */
|
|
bcm2835_cpufreq_make_freq_list(dev, sets, count);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm2835_cpufreq_type(device_t dev, int *type)
|
|
{
|
|
|
|
if (type == NULL)
|
|
return (EINVAL);
|
|
*type = CPUFREQ_TYPE_ABSOLUTE;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t bcm2835_cpufreq_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, bcm2835_cpufreq_identify),
|
|
DEVMETHOD(device_probe, bcm2835_cpufreq_probe),
|
|
DEVMETHOD(device_attach, bcm2835_cpufreq_attach),
|
|
DEVMETHOD(device_detach, bcm2835_cpufreq_detach),
|
|
|
|
/* cpufreq interface */
|
|
DEVMETHOD(cpufreq_drv_set, bcm2835_cpufreq_set),
|
|
DEVMETHOD(cpufreq_drv_get, bcm2835_cpufreq_get),
|
|
DEVMETHOD(cpufreq_drv_settings, bcm2835_cpufreq_settings),
|
|
DEVMETHOD(cpufreq_drv_type, bcm2835_cpufreq_type),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static devclass_t bcm2835_cpufreq_devclass;
|
|
static driver_t bcm2835_cpufreq_driver = {
|
|
"bcm2835_cpufreq",
|
|
bcm2835_cpufreq_methods,
|
|
sizeof(struct bcm2835_cpufreq_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(bcm2835_cpufreq, cpu, bcm2835_cpufreq_driver,
|
|
bcm2835_cpufreq_devclass, 0, 0);
|