freebsd-skq/sys/dev/acpica/acpi_pcib.c
jhb bdd8e8fe81 Add a new method to the PCI bridge interface, PCIB_POWER_FOR_SLEEP(). This
method is used by the PCI bus driver to query the power management system
to determine the proper device state to be used for a device during suspend
and resume.  For the ACPI PCI bridge drivers this calls
acpi_device_pwr_for_sleep().  This removes ACPI-specific knowledge from
the PCI and PCI-PCI bridge drivers.

Reviewed by:	jkim
2010-08-17 15:44:52 +00:00

289 lines
8.5 KiB
C

/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <dev/acpica/acpivar.h>
#include <dev/acpica/acpi_pcibvar.h>
#include <dev/pci/pcivar.h>
#include "pcib_if.h"
/* Hooks for the ACPI CA debugging infrastructure. */
#define _COMPONENT ACPI_BUS
ACPI_MODULE_NAME("PCI")
ACPI_SERIAL_DECL(pcib, "ACPI PCI bus methods");
/*
* For locking, we assume the caller is not concurrent since this is
* triggered by newbus methods.
*/
struct prt_lookup_request {
ACPI_PCI_ROUTING_TABLE *pr_entry;
u_int pr_pin;
u_int pr_slot;
};
typedef void prt_entry_handler(ACPI_PCI_ROUTING_TABLE *entry, void *arg);
static void prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg);
static void prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg);
static void prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler,
void *arg);
static void
prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler, void *arg)
{
ACPI_PCI_ROUTING_TABLE *entry;
char *prtptr;
/* First check to see if there is a table to walk. */
if (prt == NULL || prt->Pointer == NULL)
return;
/* Walk the table executing the handler function for each entry. */
prtptr = prt->Pointer;
entry = (ACPI_PCI_ROUTING_TABLE *)prtptr;
while (entry->Length != 0) {
handler(entry, arg);
prtptr += entry->Length;
entry = (ACPI_PCI_ROUTING_TABLE *)prtptr;
}
}
static void
prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg)
{
ACPI_HANDLE handle;
device_t child, pcib;
int error;
/* We only care about entries that reference a link device. */
if (entry->Source == NULL || entry->Source[0] == '\0')
return;
/*
* In practice, we only see SourceIndex's of 0 out in the wild.
* When indices != 0 have been found, they've been bugs in the ASL.
*/
if (entry->SourceIndex != 0)
return;
/* Lookup the associated handle and device. */
pcib = (device_t)arg;
if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, entry->Source, &handle)))
return;
child = acpi_get_device(handle);
if (child == NULL)
return;
/* If the device hasn't been probed yet, force it to do so. */
error = device_probe_and_attach(child);
if (error != 0) {
device_printf(pcib, "failed to force attach of %s\n",
acpi_name(handle));
return;
}
/* Add a reference for a specific bus/device/pin tuple. */
acpi_pci_link_add_reference(child, entry->SourceIndex, pcib,
ACPI_ADR_PCI_SLOT(entry->Address), entry->Pin);
}
int
acpi_pcib_attach(device_t dev, ACPI_BUFFER *prt, int busno)
{
ACPI_STATUS status;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
/*
* Don't attach if we're not really there.
*
* XXX: This isn't entirely correct since we may be a PCI bus
* on a hot-plug docking station, etc.
*/
if (!acpi_DeviceIsPresent(dev))
return_VALUE(ENXIO);
/*
* Get the PCI interrupt routing table for this bus. If we can't
* get it, this is not an error but may reduce functionality. There
* are several valid bridges in the field that do not have a _PRT, so
* only warn about missing tables if bootverbose is set.
*/
prt->Length = ACPI_ALLOCATE_BUFFER;
status = AcpiGetIrqRoutingTable(acpi_get_handle(dev), prt);
if (ACPI_FAILURE(status) && (bootverbose || status != AE_NOT_FOUND))
device_printf(dev,
"could not get PCI interrupt routing table for %s - %s\n",
acpi_name(acpi_get_handle(dev)), AcpiFormatException(status));
/*
* Attach the PCI bus proper.
*/
if (device_add_child(dev, "pci", busno) == NULL) {
device_printf(device_get_parent(dev), "couldn't attach pci bus\n");
return_VALUE(ENXIO);
}
/*
* Now go scan the bus.
*/
prt_walk_table(prt, prt_attach_devices, dev);
return_VALUE (bus_generic_attach(dev));
}
static void
prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg)
{
struct prt_lookup_request *pr;
pr = (struct prt_lookup_request *)arg;
if (pr->pr_entry != NULL)
return;
/*
* Compare the slot number (high word of Address) and pin number
* (note that ACPI uses 0 for INTA) to check for a match.
*
* Note that the low word of the Address field (function number)
* is required by the specification to be 0xffff. We don't risk
* checking it here.
*/
if (ACPI_ADR_PCI_SLOT(entry->Address) == pr->pr_slot &&
entry->Pin == pr->pr_pin)
pr->pr_entry = entry;
}
/*
* Route an interrupt for a child of the bridge.
*/
int
acpi_pcib_route_interrupt(device_t pcib, device_t dev, int pin,
ACPI_BUFFER *prtbuf)
{
ACPI_PCI_ROUTING_TABLE *prt;
struct prt_lookup_request pr;
ACPI_HANDLE lnkdev;
int interrupt;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
interrupt = PCI_INVALID_IRQ;
/* ACPI numbers pins 0-3, not 1-4 like the BIOS. */
pin--;
ACPI_SERIAL_BEGIN(pcib);
/* Search for a matching entry in the routing table. */
pr.pr_entry = NULL;
pr.pr_pin = pin;
pr.pr_slot = pci_get_slot(dev);
prt_walk_table(prtbuf, prt_lookup_device, &pr);
if (pr.pr_entry == NULL) {
device_printf(pcib, "no PRT entry for %d.%d.INT%c\n", pci_get_bus(dev),
pci_get_slot(dev), 'A' + pin);
goto out;
}
prt = pr.pr_entry;
if (bootverbose) {
device_printf(pcib, "matched entry for %d.%d.INT%c",
pci_get_bus(dev), pci_get_slot(dev), 'A' + pin);
if (prt->Source != NULL && prt->Source[0] != '\0')
printf(" (src %s:%u)", prt->Source, prt->SourceIndex);
printf("\n");
}
/*
* If source is empty/NULL, the source index is a global IRQ number
* and it's hard-wired so we're done.
*
* XXX: If the source index is non-zero, ignore the source device and
* assume that this is a hard-wired entry.
*/
if (prt->Source == NULL || prt->Source[0] == '\0' ||
prt->SourceIndex != 0) {
if (bootverbose)
device_printf(pcib, "slot %d INT%c hardwired to IRQ %d\n",
pci_get_slot(dev), 'A' + pin, prt->SourceIndex);
if (prt->SourceIndex) {
interrupt = prt->SourceIndex;
BUS_CONFIG_INTR(dev, interrupt, INTR_TRIGGER_LEVEL,
INTR_POLARITY_LOW);
} else
device_printf(pcib, "error: invalid hard-wired IRQ of 0\n");
goto out;
}
/*
* We have to find the source device (PCI interrupt link device).
*/
if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, prt->Source, &lnkdev))) {
device_printf(pcib, "couldn't find PCI interrupt link device %s\n",
prt->Source);
goto out;
}
interrupt = acpi_pci_link_route_interrupt(acpi_get_device(lnkdev),
prt->SourceIndex);
if (bootverbose && PCI_INTERRUPT_VALID(interrupt))
device_printf(pcib, "slot %d INT%c routed to irq %d via %s\n",
pci_get_slot(dev), 'A' + pin, interrupt, acpi_name(lnkdev));
out:
ACPI_SERIAL_END(pcib);
return_VALUE (interrupt);
}
int
acpi_pcib_power_for_sleep(device_t pcib, device_t dev, int *pstate)
{
device_t acpi_dev;
acpi_dev = devclass_get_device(devclass_find("acpi"), 0);
acpi_device_pwr_for_sleep(acpi_dev, dev, pstate);
return (0);
}