d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0b5d6b8173
freebsd-skq/sys/netinet6/in6_proto.c
Mark Johnston 274579831b capsicum: Limit socket operations in capability mode 
Capsicum did not prevent certain privileged networking operations,
specifically creation of raw sockets and network configuration ioctls.
However, these facilities can be used to circumvent some of the
restrictions that capability mode is supposed to enforce.

Add capability mode checks to disallow network configuration ioctls and
creation of sockets other than PF_LOCAL and SOCK_DGRAM/STREAM/SEQPACKET
internet sockets.

Reviewed by:	oshogbo
Discussed with:	emaste
Reported by:	manu
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D29423
2021-04-07 14:32:56 -04:00

611 lines
21 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $KAME: in6_proto.c,v 1.91 2001/05/27 13:28:35 itojun Exp $
*/
/*-
* Copyright (c) 1982, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_proto.c 8.1 (Berkeley) 6/10/93
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include "opt_ipstealth.h"
#include "opt_sctp.h"
#include "opt_route.h"
#include <sys/param.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/jail.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/domain.h>
#include <sys/mbuf.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/radix.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip_encap.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#include <netinet/icmp6.h>
#include <netinet/tcp.h>
#include <netinet/tcp_timer.h>
#include <netinet/tcp_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <netinet6/tcp6_var.h>
#include <netinet6/raw_ip6.h>
#include <netinet6/udp6_var.h>
#include <netinet6/pim6_var.h>
#include <netinet6/nd6.h>
#ifdef SCTP
#include <netinet/in_pcb.h>
#include <netinet/sctp_pcb.h>
#include <netinet/sctp.h>
#include <netinet/sctp_var.h>
#include <netinet6/sctp6_var.h>
#endif /* SCTP */
#include <netinet6/ip6protosw.h>
/*
* TCP/IP protocol family: IP6, ICMP6, UDP, TCP.
*/
FEATURE(inet6, "Internet Protocol version 6");
extern struct domain inet6domain;
static struct pr_usrreqs nousrreqs;
#define PR_LISTEN 0
#define PR_ABRTACPTDIS 0
/* Spacer for loadable protocols. */
#define IP6PROTOSPACER \
{ \
.pr_domain = &inet6domain, \
.pr_protocol = PROTO_SPACER, \
.pr_usrreqs = &nousrreqs \
}
struct protosw inet6sw[] = {
{
.pr_type = 0,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_IPV6,
.pr_flags = PR_CAPATTACH,
.pr_init = ip6_init,
.pr_slowtimo = frag6_slowtimo,
.pr_drain = frag6_drain,
.pr_usrreqs = &nousrreqs,
},
{
.pr_type = SOCK_DGRAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_UDP,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_CAPATTACH,
.pr_input = udp6_input,
.pr_ctlinput = udp6_ctlinput,
.pr_ctloutput = ip6_ctloutput,
#ifndef INET /* Do not call initialization twice. */
.pr_init = udp_init,
#endif
.pr_usrreqs = &udp6_usrreqs,
},
{
.pr_type = SOCK_STREAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_TCP,
.pr_flags = PR_CONNREQUIRED|PR_IMPLOPCL|PR_WANTRCVD|
PR_LISTEN|PR_CAPATTACH,
.pr_input = tcp6_input,
.pr_ctlinput = tcp6_ctlinput,
.pr_ctloutput = tcp_ctloutput,
#ifndef INET /* don't call initialization, timeout, and drain routines twice */
.pr_init = tcp_init,
.pr_slowtimo = tcp_slowtimo,
.pr_drain = tcp_drain,
#endif
.pr_usrreqs = &tcp6_usrreqs,
},
#ifdef SCTP
{
.pr_type = SOCK_SEQPACKET,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_SCTP,
.pr_flags = PR_WANTRCVD|PR_LASTHDR,
.pr_input = sctp6_input,
.pr_ctlinput = sctp6_ctlinput,
.pr_ctloutput = sctp_ctloutput,
#ifndef INET /* Do not call initialization and drain routines twice. */
.pr_drain = sctp_drain,
.pr_init = sctp_init,
#endif
.pr_usrreqs = &sctp6_usrreqs
},
{
.pr_type = SOCK_STREAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_SCTP,
.pr_flags = PR_CONNREQUIRED|PR_WANTRCVD|PR_LASTHDR,
.pr_input = sctp6_input,
.pr_ctlinput = sctp6_ctlinput,
.pr_ctloutput = sctp_ctloutput,
.pr_drain = NULL, /* Covered by the SOCK_SEQPACKET entry. */
.pr_usrreqs = &sctp6_usrreqs
},
#endif /* SCTP */
{
.pr_type = SOCK_DGRAM,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_UDPLITE,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_CAPATTACH,
.pr_input = udp6_input,
.pr_ctlinput = udplite6_ctlinput,
.pr_ctloutput = udp_ctloutput,
#ifndef INET /* Do not call initialization twice. */
.pr_init = udplite_init,
#endif
.pr_usrreqs = &udp6_usrreqs,
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_RAW,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = rip6_input,
.pr_output = rip6_output,
.pr_ctlinput = rip6_ctlinput,
.pr_ctloutput = rip6_ctloutput,
#ifndef INET /* Do not call initialization twice. */
.pr_init = rip_init,
#endif
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_ICMPV6,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = icmp6_input,
.pr_output = rip6_output,
.pr_ctlinput = rip6_ctlinput,
.pr_ctloutput = rip6_ctloutput,
.pr_fasttimo = icmp6_fasttimo,
.pr_slowtimo = icmp6_slowtimo,
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_DSTOPTS,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = dest6_input,
.pr_usrreqs = &nousrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_ROUTING,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = route6_input,
.pr_usrreqs = &nousrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_FRAGMENT,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = frag6_input,
.pr_usrreqs = &nousrreqs
},
#ifdef INET
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_IPV4,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
#endif /* INET */
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_IPV6,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_GRE,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_protocol = IPPROTO_PIM,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
/* Spacer n-times for loadable protocols. */
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
IP6PROTOSPACER,
/* raw wildcard */
{
.pr_type = SOCK_RAW,
.pr_domain = &inet6domain,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = rip6_input,
.pr_output = rip6_output,
.pr_ctloutput = rip6_ctloutput,
.pr_usrreqs = &rip6_usrreqs
},
};
struct domain inet6domain = {
.dom_family = AF_INET6,
.dom_name = "internet6",
.dom_protosw = (struct protosw *)inet6sw,
.dom_protoswNPROTOSW = (struct protosw *)&inet6sw[nitems(inet6sw)],
.dom_rtattach = in6_inithead,
#ifdef VIMAGE
.dom_rtdetach = in6_detachhead,
#endif
.dom_ifattach = in6_domifattach,
.dom_ifdetach = in6_domifdetach,
.dom_ifmtu = in6_domifmtu
};
VNET_DOMAIN_SET(inet6);
/*
* Internet configuration info
*/
#ifndef IPV6FORWARDING
#ifdef GATEWAY6
#define IPV6FORWARDING 1 /* forward IP6 packets not for us */
#else
#define IPV6FORWARDING 0 /* don't forward IP6 packets not for us */
#endif /* GATEWAY6 */
#endif /* !IPV6FORWARDING */
#ifndef IPV6_SENDREDIRECTS
#define IPV6_SENDREDIRECTS 1
#endif
VNET_DEFINE(int, ip6_forwarding) = IPV6FORWARDING; /* act as router? */
VNET_DEFINE(int, ip6_sendredirects) = IPV6_SENDREDIRECTS;
VNET_DEFINE(int, ip6_defhlim) = IPV6_DEFHLIM;
VNET_DEFINE(int, ip6_defmcasthlim) = IPV6_DEFAULT_MULTICAST_HOPS;
VNET_DEFINE(int, ip6_accept_rtadv) = 0;
VNET_DEFINE(int, ip6_no_radr) = 0;
VNET_DEFINE(int, ip6_norbit_raif) = 0;
VNET_DEFINE(int, ip6_rfc6204w3) = 0;
VNET_DEFINE(int, ip6_log_interval) = 5;
VNET_DEFINE(int, ip6_hdrnestlimit) = 15;/* How many header options will we
* process? */
VNET_DEFINE(int, ip6_dad_count) = 1; /* DupAddrDetectionTransmits */
VNET_DEFINE(int, ip6_auto_flowlabel) = 1;
VNET_DEFINE(int, ip6_use_deprecated) = 1;/* allow deprecated addr
* (RFC2462 5.5.4) */
VNET_DEFINE(int, ip6_rr_prune) = 5; /* router renumbering prefix
* walk list every 5 sec. */
VNET_DEFINE(int, ip6_mcast_pmtu) = 0; /* enable pMTU discovery for multicast? */
VNET_DEFINE(int, ip6_v6only) = 1;
VNET_DEFINE(time_t, ip6_log_time) = (time_t)0L;
#ifdef IPSTEALTH
VNET_DEFINE(int, ip6stealth) = 0;
#endif
VNET_DEFINE(int, nd6_onlink_ns_rfc4861) = 0;/* allow 'on-link' nd6 NS
* (RFC 4861) */
/* icmp6 */
/*
* BSDI4 defines these variables in in_proto.c...
* XXX: what if we don't define INET? Should we define pmtu6_expire
* or so? (jinmei@kame.net 19990310)
*/
VNET_DEFINE(int, pmtu_expire) = 60*10;
VNET_DEFINE(int, pmtu_probe) = 60*2;
/* ICMPV6 parameters */
VNET_DEFINE(int, icmp6_rediraccept) = 1;/* accept and process redirects */
VNET_DEFINE(int, icmp6_redirtimeout) = 10 * 60; /* 10 minutes */
VNET_DEFINE(int, icmp6errppslim) = 100; /* 100pps */
/* control how to respond to NI queries */
VNET_DEFINE(int, icmp6_nodeinfo) =
(ICMP6_NODEINFO_FQDNOK|ICMP6_NODEINFO_NODEADDROK);
VNET_DEFINE(int, icmp6_nodeinfo_oldmcprefix) = 1;
/*
* sysctl related items.
*/
SYSCTL_NODE(_net, PF_INET6, inet6, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"Internet6 Family");
/* net.inet6 */
SYSCTL_NODE(_net_inet6, IPPROTO_IPV6, ip6, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"IP6");
SYSCTL_NODE(_net_inet6, IPPROTO_ICMPV6, icmp6, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"ICMP6");
SYSCTL_NODE(_net_inet6, IPPROTO_UDP, udp6, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"UDP6");
SYSCTL_NODE(_net_inet6, IPPROTO_TCP, tcp6, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"TCP6");
#if defined(SCTP) || defined(SCTP_SUPPORT)
SYSCTL_NODE(_net_inet6, IPPROTO_SCTP, sctp6, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"SCTP6");
#endif
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
SYSCTL_NODE(_net_inet6, IPPROTO_ESP, ipsec6, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"IPSEC6");
#endif /* IPSEC */
/* net.inet6.ip6 */
static int
sysctl_ip6_temppltime(SYSCTL_HANDLER_ARGS)
{
int error, val;
val = V_ip6_temp_preferred_lifetime;
error = sysctl_handle_int(oidp, &val, 0, req);
if (error != 0 || !req->newptr)
return (error);
if (val < V_ip6_desync_factor + V_ip6_temp_regen_advance)
return (EINVAL);
V_ip6_temp_preferred_lifetime = val;
return (0);
}
static int
sysctl_ip6_tempvltime(SYSCTL_HANDLER_ARGS)
{
int error, val;
val = V_ip6_temp_valid_lifetime;
error = sysctl_handle_int(oidp, &val, 0, req);
if (error != 0 || !req->newptr)
return (error);
if (val < V_ip6_temp_preferred_lifetime)
return (EINVAL);
V_ip6_temp_valid_lifetime = val;
return (0);
}
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_FORWARDING, forwarding,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_forwarding), 0,
"Enable forwarding of IPv6 packets between interfaces");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_SENDREDIRECTS, redirect,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_sendredirects), 0,
"Send ICMPv6 redirects for unforwardable IPv6 packets");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_DEFHLIM, hlim,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_defhlim), 0,
"Default hop limit to use for outgoing IPv6 packets");
SYSCTL_VNET_PCPUSTAT(_net_inet6_ip6, IPV6CTL_STATS, stats, struct ip6stat,
ip6stat,
"IP6 statistics (struct ip6stat, netinet6/ip6_var.h)");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_ACCEPT_RTADV, accept_rtadv,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_accept_rtadv), 0,
"Default value of per-interface flag for accepting ICMPv6 RA messages");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_NO_RADR, no_radr,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_no_radr), 0,
"Default value of per-interface flag to control whether routers "
"sending ICMPv6 RA messages on that interface are added into the "
"default router list");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_NORBIT_RAIF, norbit_raif,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_norbit_raif), 0,
"Always set clear the R flag in ICMPv6 NA messages when accepting RA "
"on the interface");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_RFC6204W3, rfc6204w3,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_rfc6204w3), 0,
"Accept the default router list from ICMPv6 RA messages even "
"when packet forwarding is enabled");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_LOG_INTERVAL, log_interval,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_log_interval), 0,
"Frequency in seconds at which to log IPv6 forwarding errors");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_HDRNESTLIMIT, hdrnestlimit,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_hdrnestlimit), 0,
"Default maximum number of IPv6 extension headers permitted on "
"incoming IPv6 packets, 0 for no artificial limit");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_DAD_COUNT, dad_count,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_dad_count), 0,
"Number of ICMPv6 NS messages sent during duplicate address detection");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_AUTO_FLOWLABEL, auto_flowlabel,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_auto_flowlabel), 0,
"Provide an IPv6 flowlabel in outbound packets");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_DEFMCASTHLIM, defmcasthlim,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_defmcasthlim), 0,
"Default hop limit for IPv6 multicast packets originating from this "
"node");
SYSCTL_STRING(_net_inet6_ip6, IPV6CTL_KAME_VERSION, kame_version,
CTLFLAG_RD, __KAME_VERSION, 0,
"KAME version string");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_USE_DEPRECATED, use_deprecated,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_use_deprecated), 0,
"Allow the use of addresses whose preferred lifetimes have expired");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_RR_PRUNE, rr_prune,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_rr_prune), 0,
""); /* XXX unused */
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_USETEMPADDR, use_tempaddr,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_use_tempaddr), 0,
"Create RFC3041 temporary addresses for autoconfigured addresses");
SYSCTL_PROC(_net_inet6_ip6, IPV6CTL_TEMPPLTIME, temppltime,
CTLFLAG_VNET | CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT,
NULL, 0, sysctl_ip6_temppltime, "I",
"Maximum preferred lifetime for temporary addresses");
SYSCTL_PROC(_net_inet6_ip6, IPV6CTL_TEMPVLTIME, tempvltime,
CTLFLAG_VNET | CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT,
NULL, 0, sysctl_ip6_tempvltime, "I",
"Maximum valid lifetime for temporary addresses");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_V6ONLY, v6only,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_v6only), 0,
"Restrict AF_INET6 sockets to IPv6 addresses only");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_AUTO_LINKLOCAL, auto_linklocal,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_auto_linklocal), 0,
"Default value of per-interface flag for automatically adding an IPv6 "
"link-local address to interfaces when attached");
SYSCTL_VNET_PCPUSTAT(_net_inet6_ip6, IPV6CTL_RIP6STATS, rip6stats,
struct rip6stat, rip6stat,
"Raw IP6 statistics (struct rip6stat, netinet6/raw_ip6.h)");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_PREFER_TEMPADDR, prefer_tempaddr,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_prefer_tempaddr), 0,
"Prefer RFC3041 temporary addresses in source address selection");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_USE_DEFAULTZONE, use_defaultzone,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_use_defzone), 0,
"Use the default scope zone when none is specified");
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_MCAST_PMTU, mcast_pmtu,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_mcast_pmtu), 0,
"Enable path MTU discovery for multicast packets");
#ifdef IPSTEALTH
SYSCTL_INT(_net_inet6_ip6, IPV6CTL_STEALTH, stealth, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(ip6stealth), 0,
"Forward IPv6 packets without decrementing their TTL");
#endif
/* net.inet6.icmp6 */
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_REDIRACCEPT, rediraccept,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6_rediraccept), 0,
"Accept ICMPv6 redirect messages");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_REDIRTIMEOUT, redirtimeout,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6_redirtimeout), 0,
"Delay in seconds before expiring redirect route");
SYSCTL_VNET_PCPUSTAT(_net_inet6_icmp6, ICMPV6CTL_STATS, stats,
struct icmp6stat, icmp6stat,
"ICMPv6 statistics (struct icmp6stat, netinet/icmp6.h)");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_PRUNE, nd6_prune,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_prune), 0,
"Frequency in seconds of checks for expired prefixes and routers");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_DELAY, nd6_delay,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_delay), 0,
"Delay in seconds before probing for reachability");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_UMAXTRIES, nd6_umaxtries,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_umaxtries), 0,
"Number of ICMPv6 NS messages sent during reachability detection");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_MMAXTRIES, nd6_mmaxtries,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_mmaxtries), 0,
"Number of ICMPv6 NS messages sent during address resolution");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_USELOOPBACK, nd6_useloopback,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_useloopback), 0,
"Create a loopback route when configuring an IPv6 address");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_NODEINFO, nodeinfo,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6_nodeinfo), 0,
"Mask of enabled RFC4620 node information query types");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_NODEINFO_OLDMCPREFIX,
nodeinfo_oldmcprefix, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(icmp6_nodeinfo_oldmcprefix), 0,
"Join old IPv6 NI group address in draft-ietf-ipngwg-icmp-name-lookup "
"for compatibility with KAME implementation");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ERRPPSLIMIT, errppslimit,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(icmp6errppslim), 0,
"Maximum number of ICMPv6 error messages per second");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_MAXNUDHINT, nd6_maxnudhint,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_maxnudhint), 0,
""); /* XXX unused */
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_DEBUG, nd6_debug,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(nd6_debug), 0,
"Log NDP debug messages");
SYSCTL_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_ONLINKNSRFC4861,
nd6_onlink_ns_rfc4861, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(nd6_onlink_ns_rfc4861), 0,
"Accept 'on-link' ICMPv6 NS messages in compliance with RFC 4861");
#ifdef EXPERIMENTAL
SYSCTL_INT(_net_inet6_icmp6, OID_AUTO,
nd6_ignore_ipv6_only_ra, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(nd6_ignore_ipv6_only_ra), 0,
"Ignore the 'IPv6-Only flag' in RA messages in compliance with "
"draft-ietf-6man-ipv6only-flag");
#endif
Reference in New Issue View Git Blame Copy Permalink